net: usb: r8152: fix transmit queue timeout
Subsystems (4)
PATCH v2 1/1 net: usb: r8152: fix transmit queue timeout
When the TX queue length reaches the threshold, the netdev watchdog immediately detects a TX queue timeout.
This patch updates the trans_start timestamp of the transmit queue on every asynchronous USB URB submission along the transmit path, ensuring that the network watchdog accurately reflects ongoing transmission activity.
---
v2: Update the transmit timestamp when submitting the USB URB.
--- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/usb/r8152.c +2 -0
@@ -2449,6 +2449,8 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg) ret =usb_submit_urb (agg->urb,GFP_ATOMIC );if (ret <0 )usb_autopm_put_interface_async (tp->intf); +else +netif_trans_update (tp->netdev); out_tx_fill:return ret;
Signature · 1 line
2.34.1
Quoted 32 lines · insyelu
When the TX queue length reaches the threshold, the netdev watchdog immediately detects a TX queue timeout.
This patch updates the
trans_starttimestamp of the transmit queue on every asynchronous USB URB submission along the transmit path, ensuring that the network watchdog accurately reflects ongoing transmission activity.Signed-off-by insyelu <[email protected]>---
v2: Update the transmit timestamp when submitting the USB URB.--- drivers/net/usb/r8152.c | 2 ++ 1 file changed, 2 insertions(+)drivers/net/usb/r8152.c +2
-0@@ -2449,6 +2449,8 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg) ret =usb_submit_urb (agg->urb,GFP_ATOMIC );if (ret <0 )usb_autopm_put_interface_async (tp->intf); +else +netif_trans_update (tp->netdev); out_tx_fill:return ret;Signature · 1 line
2.34.1
Hi,
This is the friendly patch-bot of Greg Kroah-Hartman. You have sent him a patch that has triggered this response. He used to manually respond to these common problems, but in order to save his sanity (he kept writing the same thing over and over, yet to different people), I was created. Hopefully you will not take offence and will fix the problem in your patch and resubmit it so that it can be accepted into the Linux kernel tree.
You are receiving this message because of the following common error(s) as indicated below:
- It looks like you did not use your "real" name for the patch on either the Signed-off-by: line, or the From: line (both of which have to match). Please read the kernel file, Documentation/process/submitting-patches.rst for how to do this correctly.
If you wish to discuss this problem further, or you have questions about how to resolve this issue, please feel free to respond to this email and Greg will reply once he has dug out from the pending patches received from other developers.
thanks,
greg k-h's patch email bot