Skip to contentSkip to conversation

leds: Add shutdown gpio for is31fl32xx

PATCH RESEND Superseded Jun Yan 2 participants 7 messages Apr 28

Subsystems (2)

v1 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Jun Yan

author
#0 lore raw

cover leds: Add shutdown gpio for is31fl32xx

This patch series primarily adds the shutdown-gpios support for the IS31FL32xx controller.It also includes a fix and dt-bindings updates derived from previous attempts [1].

Patch 1 and patch 2 are based on a previous attempt [1]. The driver-related updates in patch 2 have already been merged.

Patch 3 and Patch 4 add support for the shutdown-gpios property, which corresponds to the SDB pin of the IS31FL32xx series chips. This pin is used to enter and exit the hardware shutdown mode.

Patch 5 fixes errors introduced by previous changes. It impacts the brightness control function of the IS31FL3236.

[1] https://lore.kernel.org/linux-leds/[email protected]/

Jun Yan (5):
dt-bindings: leds: is31fl32xx: convert the binding to yaml
dt-bindings: leds: leds-is31fl32xx: add support for is31fl3236a
dt-bindings: leds: leds-is31fl32xx: Add shutdown-gpios property
leds: is31fl32xx: Add shutdown pin to exit hardware shutdown mode
leds: is31f132xx: Fix missing brightness_steps for is31f13236

 .../bindings/leds/issl,is31fl32xx.yaml        | 200 ++++++++++++++++++
 .../bindings/leds/leds-is31fl32xx.txt         |  53 -----
 drivers/leds/leds-is31fl32xx.c                |   7 +
 3 files changed, 207 insertions(+), 53 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
Signature · 1 line
2.53.0
author
#1 lore raw

PATCH RESEND 1/5 dt-bindings: leds: is31fl32xx: convert the binding to yaml

Convert leds-is31fl32xx to DT schema format.

---
 .../bindings/leds/issl,is31fl32xx.yaml        | 163 ++++++++++++++++++
 .../bindings/leds/leds-is31fl32xx.txt         |  53 ------
 2 files changed, 163 insertions(+), 53 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml new file +163 -0
new file mode 100644
index 000000000000..ae5736e1b8e4
@@ -0,0 +1,163 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-is31fl32xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IS31FL32xx and Si-En SN32xx LED controller
+
+maintainers:
+  - Lucca Fachinetti <[email protected]>
+  - Pavel Machek <[email protected]>
+  - Jun Yan <[email protected]>
+
+description: |
+  The IS31FL32xx/SN32xx family of LED drivers are I2C devices with multiple
+  constant-current channels, each with independent 256-level PWM control.
+  Each LED is represented as a sub-node of the device.
+
+  For more product information please see the links below:
+    https://www.lumissil.com/assets/pdf/core/IS31FL3216_DS.pdf
+    https://www.lumissil.com/assets/pdf/core/IS31FL3218_DS.pdf
+    https://www.lumissil.com/assets/pdf/core/IS31FL3235_DS.pdf
+    https://www.lumissil.com/assets/pdf/core/IS31FL3236_DS.pdf
+    https://www.lumissil.com/assets/pdf/core/IS31FL3293_DS.pdf
+
+properties:
+  compatible:
+    enum:
+      - issi,is31fl3216
+      - issi,is31fl3218
+      - issi,is31fl3235
+      - issi,is31fl3236
+      - issi,is31fl3293
+      - si-en,sn3216
+      - si-en,sn3218
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^led@([1-9])+$":
+    type: object
+    $ref: common.yaml#
+    unevaluatedProperties: false
+
+    properties:
+      reg:
+        description:
+          LED channel number (1..N)
+        minimum: 1
+        maximum: 36
+
+    required:
+      - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3293
+    then:
+      patternProperties:
+        "^led@([1-9])+$":
+          properties:
+            reg:
+              maximum: 3
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3216
+              - si-en,sn3216
+    then:
+      patternProperties:
+        "^led@([1-9])+$":
+          properties:
+            reg:
+              maximum: 16
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3218
+              - si-en,sn3218
+    then:
+      patternProperties:
+        "^led@([1-9])+$":
+          properties:
+            reg:
+              maximum: 18
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3235
+    then:
+      patternProperties:
+        "^led@([1-9])+$":
+          properties:
+            reg:
+              maximum: 28
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3236
+    then:
+      patternProperties:
+        "^led@([1-9])+$":
+          properties:
+            reg:
+              maximum: 36
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led-controller@3c {
+            compatible = "issi,is31fl3236";
+            reg = <0x3c>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            led@1 {
+                reg = <1>;
+                color = <LED_COLOR_ID_RED>;
+                function = LED_FUNCTION_STATUS;
+            };
+
+            led@5 {
+                reg = <5>;
+                color = <LED_COLOR_ID_GREEN>;
+                function = LED_FUNCTION_POWER;
+                linux,default-trigger = "default-on";
+            };
+        };
+    };
+...
+
Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt deleted +0 -53

53 lines not on this page · raw message

Signature · 1 line
2.53.0
#2 lore raw

Re: [PATCH v1 RESEND 1/5] dt-bindings: leds: is31fl32xx: convert the binding to yaml

Quoted 7 lines · Jun Yan

Convert leds-is31fl32xx to DT schema format.

Quoted 7 lines
---
 .../bindings/leds/issl,is31fl32xx.yaml        | 163 ++++++++++++++++++
 .../bindings/leds/leds-is31fl32xx.txt         |  53 ------
 2 files changed, 163 insertions(+), 53 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml
 delete mode 100644 Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml: $id: Cannot determine base path from $id, relative path/filename doesn't match actual path or filename
$id: http://devicetree.org/schemas/leds/leds-is31fl32xx.yaml
file: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/[email protected]

The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.

author
#3 lore raw

PATCH RESEND 2/5 dt-bindings: leds: leds-is31fl32xx: add support for is31fl3236a

In reply to Jun Yan

Add an additional and optional control property for setting the output PWM frequency to 22kHz that exists on is31fl3236a. The default is 3kHz and this option puts the operational frequency outside of the audible range.

---
 .../bindings/leds/issl,is31fl32xx.yaml        | 25 +++++++++++++++++++
 1 file changed, 25 insertions(+)
Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml +25 -0
index ae5736e1b8e4..01284a506e0b 100644
@@ -21,6 +21,7 @@ description: |
     https://www.lumissil.com/assets/pdf/core/IS31FL3218_DS.pdf
     https://www.lumissil.com/assets/pdf/core/IS31FL3235_DS.pdf
     https://www.lumissil.com/assets/pdf/core/IS31FL3236_DS.pdf
+    https://www.lumissil.com/assets/pdf/core/IS31FL3236A_DS.pdf
     https://www.lumissil.com/assets/pdf/core/IS31FL3293_DS.pdf
 
 properties:
@@ -30,6 +31,7 @@ properties:
       - issi,is31fl3218
       - issi,is31fl3235
       - issi,is31fl3236
+      - issi,is31fl3236a
       - issi,is31fl3293
       - si-en,sn3216
       - si-en,sn3218
@@ -37,6 +39,12 @@ properties:
   reg:
     maxItems: 1
 
+  issi,22khz-pwm:
+    type: boolean
+    description:
+      When present, the chip's PWM will operate at ~22kHz as opposed
+      to ~3kHz to move the operating frequency out of the audible range.
+
   "#address-cells":
     const: 1
 
@@ -60,6 +68,22 @@ patternProperties:
       - reg
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - issi,is31fl3216
+              - issi,is31fl3218
+              - issi,is31fl3235
+              - issi,is31fl3236
+              - issi,is31fl3293
+              - si-en,sn3216
+              - si-en,sn3218
+    then:
+      properties:
+        issi,22khz-pwm: false
+
   - if:
       properties:
         compatible:
@@ -116,6 +140,7 @@ allOf:
           contains:
             enum:
               - issi,is31fl3236
+              - issi,is31fl3236a
     then:
       patternProperties:
         "^led@([1-9])+$":
Signature · 1 line
2.53.0
author
#4 lore raw

PATCH RESEND 3/5 dt-bindings: leds: leds-is31fl32xx: Add shutdown-gpios property

In reply to Jun Yan

The IS31FL32XX series features an SDB shutdown pin.
Driving it low (active low) places the chip into hardware shutdown mode for power saving, while all register contents are preserved and registers are not reset.

Add shutdown-gpios property to describe the GPIO connected to the SDB pin of IS31FL32XX series LED controllers.

---
 .../devicetree/bindings/leds/issl,is31fl32xx.yaml    | 12 ++++++++++++
 1 file changed, 12 insertions(+)
Documentation/devicetree/bindings/leds/issl,is31fl32xx.yaml +12 -0
index 01284a506e0b..0296120a8fdf 100644
@@ -45,6 +45,15 @@ properties:
       When present, the chip's PWM will operate at ~22kHz as opposed
       to ~3kHz to move the operating frequency out of the audible range.
 
+  shutdown-gpios:
+    maxItems: 1
+    description:
+      GPIO connected to the chip's SDB pin.
+      Driving this GPIO low places the chip into hardware shutdown mode
+      for power saving. All register contents are preserved and registers
+      are not reset during shutdown. The chip exits hardware shutdown mode
+      when the SDB pin is pulled high.
+
   "#address-cells":
     const: 1
 
@@ -158,6 +167,7 @@ additionalProperties: false
 
 examples:
   - |
+    #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/leds/common.h>
 
     i2c {
@@ -170,6 +180,8 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
+            shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+
             led@1 {
                 reg = <1>;
                 color = <LED_COLOR_ID_RED>;
Signature · 1 line
2.53.0
author
#5 lore raw

PATCH RESEND 4/5 leds: is31fl32xx: Add shutdown pin to exit hardware shutdown mode

In reply to Jun Yan

The IS31FL32XX series features an SDB shutdown pin.
Driving it low (active low) places the chip into hardware shutdown mode for power saving, while all register contents are preserved and registers are not reset.

Drive the pin logic low during probe() to exit hardware shutdown mode.

---
 drivers/leds/leds-is31fl32xx.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/leds/leds-is31fl32xx.c +6 -0
index fe07acbb103a..d2be996dd4ea 100644
@@ -60,6 +60,7 @@ struct is31fl32xx_led_data {
 struct is31fl32xx_priv {
 	const struct is31fl32xx_chipdef *cdef;
 	struct i2c_client *client;
+	struct gpio_desc *shutdown_gpio;
 	unsigned int num_leds;
 	struct is31fl32xx_led_data leds[];
 };
@@ -421,6 +422,11 @@ static int is31fl32xx_parse_dt(struct device *dev,
 	const struct is31fl32xx_chipdef *cdef = priv->cdef;
 	int ret = 0;
 
+	priv->shutdown_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_LOW);
+	if (IS_ERR(priv->shutdown_gpio))
+		return dev_err_probe(dev, PTR_ERR(priv->shutdown_gpio),
+				"Failed to get shutdown gpio\n");
+
 	if ((cdef->output_frequency_setting_reg != IS31FL32XX_REG_NONE) &&
 	    of_property_read_bool(dev_of_node(dev), "issi,22khz-pwm")) {
 
Signature · 1 line
2.53.0
author
#6 lore raw

PATCH RESEND 5/5 leds: is31f132xx: Fix missing brightness_steps for is31f13236

In reply to Jun Yan

Add missing brightness_steps for is31fl3236 to fix brightness control.

Fixes a18983b95a61 ("leds: is31f132xx: Add support for is31fl3293")
---
 drivers/leds/leds-is31fl32xx.c | 1 +
 1 file changed, 1 insertion(+)
drivers/leds/leds-is31fl32xx.c +1 -0
index d2be996dd4ea..5db7d91c6a34 100644
@@ -487,6 +487,7 @@ static const struct is31fl32xx_chipdef is31fl3236_cdef = {
 	.pwm_register_base			= 0x01,
 	.led_control_register_base		= 0x26,
 	.enable_bits_per_led_control_register	= 1,
+	.brightness_steps			= 256,
 };
 
 static const struct is31fl32xx_chipdef is31fl3236a_cdef = {
Signature · 1 line
2.53.0