Skip to contentSkip to conversation

ASoC: Add TI TAC5XX2 SoundWire codec driver support

PATCH In review Niranjan H Y 3 participants 8 messages May 5 – May 7

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

v16 cover ASoC: Add TI TAC5XX2 SoundWire codec driver support

This patch series adds support for Texas Instruments TAC5XX2 family of SoundWire smart amplifiers, including TAC5572, TAC5672, TAC5682, and TAS2883 devices.

The series includes:
- SDCA power state management helper for PDE verification
- New codec driver for TAC5XX2 family with SmartAmp, SmartMic, UAJ, and HID support
- Machine driver integration for Intel SoundWire platforms
- ACPI match entries for Intel MTL platform

Changes in V16:
- use EXPORT_SYMBOL_NS instead of EXPORT_SYMBOL_GPL for asoc_sdw_ti_tac5xx2_spk_rtd_init (patch 3/4)
- remove unwanted dynamic memory allocation for local variable. (patch 3/4)
- reorder to read the uaj status after the regcache sync is done in the resume callback. (patch 2/4)
- rebase and use updated sdca_parse_function (patch 2/4)

Changes in v15: (Patch 2/4)
- call pm_runtime_resume instead of waiting for device to get initialised similar to other drivers
- skip reading the uaj and hid registers in the interrupt handler if the uaj is not supported
- remove had_unattached in the dev_resume callback
- detect headset in the dev_resume callback only if the uaj is supported
- indentation fixes to use reverse-xmas tree

Changes in v14:
- Resending complete series (v13 1/4 was accidentally sent alone)
- rename the first_hw_init to first_hw_init_done for readability.
- Removed dummy tac5xx2_sdw_clk_stop function (Patch 2/4)
- Added pm_runtime calls in .set_jack callback (Patch 2/4)
- Improved error handling for early .set_jack calls (Patch 2/4)
- drop uaj_lock to make it simiar to other drivers (Patch 2/4)
- move the pm_runtime_enable to probe and keep only pm_runtime_set_active for first attach case. (Patch 2/4)
- remove tac5xx2_sdw_clk_stop as currently it is dummy (Patch 2/4)
- Used xmas tree style in .hw_free (Patch 2/4)

Changes in v13:
- no code changes (v13 1/4 was sent alone accidentally)

Changes in v12:
- Used correct namespace while exporting variables (Patch 1/4)
- Fixed missing entity information in logging (Patch 1/4)
- Removed hw_init check in .set_jack (Patch 2/4)
- Added missing pm_runtime_disable in .remove callback (Patch 2/4)
- Improved error logging in .hw_params and .hw_free (Patch 2/4)
- Included part_id in firmware binary name (Patch 2/4)
- Updated firmware header parsing (Patch 2/4)

Niranjan H Y (4):
ASoC: SDCA: Add PDE verification reusable helper
ASoC: tac5xx2-sdw: add soundwire based codec driver
ASoC: sdw_utils: TI amp utility for tac5xx2 family
ASoC: tac5xx2-sdw: ACPI match for intel mtl platform

 include/sound/sdca_asoc.h                     |    6 +
 include/sound/soc_sdw_utils.h                 |    4 +
 sound/soc/codecs/Kconfig                      |   11 +
 sound/soc/codecs/Makefile                     |    2 +
 sound/soc/codecs/tac5xx2-sdw.c                | 2047 +++++++++++++++++
 sound/soc/codecs/tac5xx2.h                    |  259 +++
 .../intel/common/soc-acpi-intel-mtl-match.c   |  132 ++
 sound/soc/sdca/sdca_asoc.c                    |  106 +-
 sound/soc/sdw_utils/soc_sdw_ti_amp.c          |  140 +-
 sound/soc/sdw_utils/soc_sdw_utils.c           |  151 ++
 10 files changed, 2827 insertions(+), 31 deletions(-)
 create mode 100644 sound/soc/codecs/tac5xx2-sdw.c
 create mode 100644 sound/soc/codecs/tac5xx2.h
Signature · 1 line
2.34.1
#1 lore raw

PATCH v16 1/4 ASoC: SDCA: Add PDE verification reusable helper

Implement sdca_asoc_pde_ensure_ps() helper function to poll for PDE
power state transitions. Per SDCA specification, after writing REQUESTED_PS, drivers must poll ACTUAL_PS until the target power state is reached.

Changes include:
- Add sdca_asoc_pde_ensure_ps() to handle ACTUAL_PS polling with support for device-specific delay tables or default intervals
- Export function via sdca_asoc.h for use by SDCA-compliant drivers
- Refactor entity_pde_event() in sdca_asoc.c to use the helper

---
v16:
- no change

v15:
- no change

v14:
- Resending complete series (v13 1/4 was accidentally sent alone)
- No code changes from v13

v13:
- no change

v12:
- use correct namespace while exporting the variable
- fix missing entity information while logging

v11:
- revert v10 changes
- API is renamed from sdca_asoc_pde_ensure_ps to
sdca_asoc_pde_poll_actual_ps

v10:
- write REQUESTED_PS before checking the target state.
- change the API name sdca_asoc_pde_ensure_ps to sdca_asoc_set_pde_poll_sync

v9:
- newly added interface

---
 include/sound/sdca_asoc.h  |   6 +++
 sound/soc/sdca/sdca_asoc.c | 106 ++++++++++++++++++++++++++-----------
 2 files changed, 82 insertions(+), 30 deletions(-)
include/sound/sdca_asoc.h +6 -0
index 46a61a52d..ca35d5a44 100644
@@ -13,6 +13,7 @@
 struct device;
 struct regmap;
 struct sdca_function_data;
+struct sdca_pde_delay;
 struct snd_ctl_elem_value;
 struct snd_kcontrol;
 struct snd_kcontrol_new;
@@ -99,4 +100,9 @@ int sdca_asoc_q78_put_volsw(struct snd_kcontrol *kcontrol,
 			    struct snd_ctl_elem_value *ucontrol);
 int sdca_asoc_q78_get_volsw(struct snd_kcontrol *kcontrol,
 			    struct snd_ctl_elem_value *ucontrol);
+int sdca_asoc_pde_poll_actual_ps(struct device *dev, struct regmap *regmap,
+				 int function_id, int entity_id,
+			    int from_ps, int to_ps,
+			    const struct sdca_pde_delay *pde_delays,
+			    int num_delays);
 #endif // __SDCA_ASOC_H__
sound/soc/sdca/sdca_asoc.c +76 -30

124 lines not on this page · raw message

Signature · 1 line
2.34.1
#2 lore raw

PATCH v16 2/4 ASoC: tac5xx2-sdw: add soundwire based codec driver

In reply to Niranjan H Y

Add codec driver for tac5xx2 family of devices. This includes the support for
1. tac5572 - DAC, PDM, UAJ and HID
2. tas2883 - Amplifier with DSP
3. tac5672 - Similar to tac5572 with feedback
4. tac5682 - Similar to tac5672 with Amplifier DSP.

---
v16:
- reorder to read the uaj status after the regcache sync is done in the resume callback.
- rebase and use updated sdca_parse_function API

v15:
- call pm_runtime_resume instead of waiting for device to get initialised similar to other drivers
- skip reading the uaj and hid registers in the interrupt handler if the uaj is not supported
- remove had_unattached in the dev_resume callback
- detect headset in the dev_resume callback only if the uaj is supported
- indentation fixes to use reverse-xmas tree

v14:
- Resending complete series (v13 1/4 was accidentally sent alone)
- rename the first_hw_init to first_hw_init_done for readability.
- drop uaj_lock to make it simiar to other drivers
- move the pm_runtime_enable to probe and keep only pm_runtime_set_active for first attach case.
- call pm_runtime_get_sync and pm_runtime_put_autosuspend in .set_jack
- handle early call to .set_jack when is it called before first "attach"
- remove tac5xx2_sdw_clk_stop as currently it is dummy
- nit-pick in .hw_free to use xmas tree

v13:
- no change (this patch was not sent as part of v13 series)

v12:
- remove check for hw_init in the .set_jack and let regcache handle the device writes correcty.
- add missing pm_rutime_disable in the .remove callback
- improve error logging in .hw_params and .hw_free for pde entities
- improve .hw_free to throw error for unknown dai id
- include part_id in the firmware binary name to avoid potential name collision while using multiple codecs which doesn't have unqiue_id
- updated firmware header parsing to include updated header and log debug information.

v11:
- refactor code for resume to wait for the initialisation to complete and then proceed.
- replace the sdca_asoc_set_pde_pool_sync with sdca_asoc_pde_poll_actual_ps

v10:
- use sdca helper sdca_asoc_set_pde_poll_sync for
changing the power states.
- register .set_jack callback only for if uaj is
available.

v9:
- Update tac5xx2-sdw.c hw_params() and hw_free() to use new SDCA helper sdca_asoc_pde_ensure_ps
- Remove redundant PPU11 initialization as it is there as part of the initialisation table.
- remove unnecessary default value writes for latch clear as the register.
- Improve jack detection and PDE power state transition comments

v8:
- disable interrupts in .set_jack if jack is set to NULL
- hold uaj_lock in .set_jack
- remove unwanted interrupt enable in initialisation

v7:
- refactor remove the cx11, cs18 and cs11 they are not required to be configured for mic
- fix error handling and interrupt cleanup in .set_jack
- fix typo in Kconfig

v6:
- move firmware caching trigger from soundwire bus callback to soundwire probe and make it asynchronous
- validate the firmware fully before starting firmware.
- drop mixer control for cx11 configuration
- check the actual power state in .hw_free after requesting power state transition to power off
- use dev_is_pci() and remove CONFIG_PCI

v5:
- add missing pde_lock while accessing the current power state.
- add uaj_lock to serialize uaj detection update
- return error, if any, returned by sdw_stream_add_slave in hw_parms
- drop snd_soc_unregister_component as we are using devm_snd_soc_register_component
- fix issue in error handling for invalid firmware
- remove unsupported line in/out detection in jack detection
- refactor the jack and button detection logic to be based on their respective interrupt

v4:
- make volume controls as stereo controls for amp gain, playback, dmic and uaj playback.
- better error handling for "CX11 CS Select" mixer control.
- use switch statement for scalability in hw_params and hw_free
- remove unnecessary else in tac_io_init
- change error log for unsupported sample rates to debug logs
- make firmware binary parsing robust by checking the fw size during caching and parsing

v3:
- use macro SDCA_SINGLE_Q78_TLV for the volume mixer controls
- replace magic number with macro for current owner
- fix debug log message about the current owner for hid event

v2:
- Define and use consistent macros for register access to improve code readability and maintainability
- Replace complex event handlers with simpler DAPM widget implementations using direct register control for muting/unmuting and enabling/disabling components
- Replace custom volume controls with standard Q7.8 controls from the SDCA framework
- Fix PDE power state transitions with proper verification of actual power state
- Combine separate locks into a single ops\_lock to protect both firmware operations and power state transitions
- Clean up interrupt handling by removing unnecessary register accesses
- Fix headset microphone control by using the correct mono channel value
- Add comments to clarify firmware handling and critical sections

---
 sound/soc/codecs/Kconfig       |   11 +
 sound/soc/codecs/Makefile      |    2 +
 sound/soc/codecs/tac5xx2-sdw.c | 2047 ++++++++++++++++++++++++++++++++
 sound/soc/codecs/tac5xx2.h     |  259 ++++
 4 files changed, 2319 insertions(+)
 create mode 100644 sound/soc/codecs/tac5xx2-sdw.c
 create mode 100644 sound/soc/codecs/tac5xx2.h
sound/soc/codecs/Kconfig +11 -0
index c43861b7d..069ec05e4 100644
@@ -264,6 +264,7 @@ config SND_SOC_ALL_CODECS
 	imply SND_SOC_STA529
 	imply SND_SOC_STAC9766
 	imply SND_SOC_STI_SAS
+	imply SND_SOC_TAC5XX2_SDW
 	imply SND_SOC_TAS2552
 	imply SND_SOC_TAS2562
 	imply SND_SOC_TAS2764
@@ -2140,6 +2141,16 @@ config SND_SOC_STAC9766
 config SND_SOC_STI_SAS
 	tristate "codec Audio support for STI SAS codec"
 
+config SND_SOC_TAC5XX2_SDW
+	tristate "Texas Instruments TAC5XX2 SoundWire Smart Amplifier"
+	depends on SOUNDWIRE
+	depends on SND_SOC_SDCA
+	help
+	  This option enables support for Texas Instruments TAC5XX2 family
+	  of SoundWire Smart Amplifiers. This includes TAC5572, TAC5672,
+	  TAC5682 and TAS2883. To compile this driver as a module, choose
+	  M here: the module will be called snd-soc-tac5xx2.
+
 config SND_SOC_TAS2552
 	tristate "Texas Instruments TAS2552 Mono Audio amplifier"
 	depends on I2C
sound/soc/codecs/Makefile +2 -0
index 106fdc140..2c2d0553f 100644
@@ -313,6 +313,7 @@ snd-soc-sta350-y := sta350.o
 snd-soc-sta529-y := sta529.o
 snd-soc-stac9766-y := stac9766.o
 snd-soc-sti-sas-y := sti-sas.o
+snd-soc-tac5xx2-sdw-y := tac5xx2-sdw.o
 snd-soc-tas5086-y := tas5086.o
 snd-soc-tas571x-y := tas571x.o
 snd-soc-tas5720-y := tas5720.o
@@ -747,6 +748,7 @@ obj-$(CONFIG_SND_SOC_STA350)   += snd-soc-sta350.o
 obj-$(CONFIG_SND_SOC_STA529)   += snd-soc-sta529.o
 obj-$(CONFIG_SND_SOC_STAC9766)	+= snd-soc-stac9766.o
 obj-$(CONFIG_SND_SOC_STI_SAS)	+= snd-soc-sti-sas.o
+obj-$(CONFIG_SND_SOC_TAC5XX2_SDW)	+= snd-soc-tac5xx2-sdw.o
 obj-$(CONFIG_SND_SOC_TAS2552)	+= snd-soc-tas2552.o
 obj-$(CONFIG_SND_SOC_TAS2562)	+= snd-soc-tas2562.o
 obj-$(CONFIG_SND_SOC_TAS2764)	+= snd-soc-tas2764.o
sound/soc/codecs/tac5xx2-sdw.c new file +2047 -0

2,047 lines not on this page · raw message

sound/soc/codecs/tac5xx2.h new file +259 -0

259 lines not on this page · raw message

Signature · 1 line
2.34.1
reviewer Reviewed-by on v16 2/4
#3 lore raw

Re: [PATCH v16 2/4] ASoC: tac5xx2-sdw: add soundwire based codec driver

Quoted 8 lines · Niranjan H Y

Add codec driver for tac5xx2 family of devices. This includes the support for
1. tac5572 - DAC, PDM, UAJ and HID
2. tas2883 - Amplifier with DSP
3. tac5672 - Similar to tac5572 with feedback
4. tac5682 - Similar to tac5672 with Amplifier DSP.

#4 lore raw

PATCH v16 3/4 ASoC: sdw_utils: TI amp utility for tac5xx2 family

In reply to Niranjan H Y

Add TI amp utility for supporting the tac5xx2 family
of devices to support tac5572, tac5672, tac5682 and tas2883

---
v16:
- use EXPORT_SYMBOL_NS instead of EXPORT_SYMBOL_GPL for asoc_sdw_ti_tac5xx2_spk_rtd_init
- remove unwanted dynamic memory allocation for local variable.

v15:
- no change

v14:
- Resending complete series (v13 1/4 was accidentally sent alone)
- no change

---
 include/sound/soc_sdw_utils.h        |   4 +
 sound/soc/sdw_utils/soc_sdw_ti_amp.c | 140 ++++++++++++++++++++++++-
 sound/soc/sdw_utils/soc_sdw_utils.c  | 151 +++++++++++++++++++++++++++
 3 files changed, 294 insertions(+), 1 deletion(-)
include/sound/soc_sdw_utils.h +4 -0
index 489083183..d713ab2f6 100644
@@ -272,7 +272,11 @@ int asoc_sdw_ti_amp_init(struct snd_soc_card *card,
 			 struct asoc_sdw_codec_info *info,
 			 bool playback);
 int asoc_sdw_ti_spk_rtd_init(struct snd_soc_pcm_runtime *rtd, struct snd_soc_dai *dai);
+int asoc_sdw_ti_tac5xx2_spk_rtd_init(struct snd_soc_pcm_runtime *rtd,
+				     struct snd_soc_dai *dai);
 int asoc_sdw_ti_amp_initial_settings(struct snd_soc_card *card,
 				     const char *name_prefix);
+int asoc_sdw_ti_dmic_rtd_init(struct snd_soc_pcm_runtime *rtd, struct snd_soc_dai *dai);
+int asoc_sdw_ti_sdca_jack_rtd_init(struct snd_soc_pcm_runtime *rtd, struct snd_soc_dai *dai);
 
 #endif
sound/soc/sdw_utils/soc_sdw_ti_amp.c +139 -1

154 lines not on this page · raw message

sound/soc/sdw_utils/soc_sdw_utils.c +151 -0

157 lines not on this page · raw message

Signature · 1 line
2.34.1
#5 lore raw

PATCH v16 4/4 ASoC: tac5xx2-sdw: ACPI match for intel mtl platform

In reply to Niranjan H Y

Add acpi match entries to support TI's tac5572,
tas2883, tac5672 and tac5682 on link 0 on MTL machine.

---
v16:
- no change

v15:
- no change

14:
- Resending complete series (v13 1/4 was accidentally sent alone)
- no change

---
 .../intel/common/soc-acpi-intel-mtl-match.c   | 132 ++++++++++++++++++
 1 file changed, 132 insertions(+)
sound/soc/intel/common/soc-acpi-intel-mtl-match.c +132 -0
index 72c35e730..2e4222456 100644
@@ -122,6 +122,42 @@ static const struct snd_soc_acpi_endpoint spk_r_endpoint = {
 	.group_id = 1,
 };
 
+static const struct snd_soc_acpi_endpoint tac5xx2_endpoints[] = {
+	{ /* Playback Endpoint */
+		.num = 0,
+		.aggregated = 0,
+		.group_position = 0,
+		.group_id = 0,
+	},
+	{ /* Mic Capture Endpoint */
+		.num = 1,
+		.aggregated = 0,
+		.group_position = 0,
+		.group_id = 0,
+	},
+	{ /* UAJ-HP with Mic Endpoint */
+		.num = 2,
+		.aggregated = 0,
+		.group_position = 0,
+		.group_id = 0,
+	},
+};
+
+static const struct snd_soc_acpi_endpoint tas2883_endpoints[] = {
+	{ /* Playback Endpoint */
+		.num = 0,
+		.aggregated = 0,
+		.group_position = 0,
+		.group_id = 0,
+	},
+	{ /* Mic Capture Endpoint */
+		.num = 1,
+		.aggregated = 0,
+		.group_position = 0,
+		.group_id = 0,
+	},
+};
+
 static const struct snd_soc_acpi_endpoint rt712_endpoints[] = {
 	{
 		.num = 0,
@@ -1011,6 +1047,33 @@ static const struct snd_soc_acpi_adr_device cs42l42_0_adr[] = {
 	}
 };
 
+static const struct snd_soc_acpi_adr_device tac5572_0_adr[] = {
+	{
+		.adr = 0x0000300102557201ull,
+		.num_endpoints = ARRAY_SIZE(tac5xx2_endpoints),
+		.endpoints = tac5xx2_endpoints,
+		.name_prefix = "tac5572"
+	}
+};
+
+static const struct snd_soc_acpi_adr_device tac5672_0_adr[] = {
+	{
+		.adr = 0x0000300102567201ull,
+		.num_endpoints = ARRAY_SIZE(tac5xx2_endpoints),
+		.endpoints = tac5xx2_endpoints,
+		.name_prefix = "tac5672"
+	}
+};
+
+static const struct snd_soc_acpi_adr_device tac5682_0_adr[] = {
+	{
+		.adr = 0x0000300102568201ull,
+		.num_endpoints = ARRAY_SIZE(tac5xx2_endpoints),
+		.endpoints = tac5xx2_endpoints,
+		.name_prefix = "tac5682"
+	}
+};
+
 static const struct snd_soc_acpi_adr_device tas2783_0_adr[] = {
 	{
 		.adr = 0x00003c0102000001ull,
@@ -1035,9 +1098,45 @@ static const struct snd_soc_acpi_adr_device tas2783_0_adr[] = {
 		.num_endpoints = 1,
 		.endpoints = &spk_r_endpoint,
 		.name_prefix = "tas2783-4"
+	},
+};
+
+static const struct snd_soc_acpi_adr_device tas2883_0_adr[] = {
+	{
+		.adr = 0x0000300102288301ull,
+		.num_endpoints = ARRAY_SIZE(tas2883_endpoints),
+		.endpoints = tas2883_endpoints,
+		.name_prefix = "tas2883"
 	}
 };
 
+static const struct snd_soc_acpi_link_adr tac5572_l0[] = {
+	{
+		.mask = BIT(0),
+		.num_adr = ARRAY_SIZE(tac5572_0_adr),
+		.adr_d = tac5572_0_adr,
+	},
+	{}
+};
+
+static const struct snd_soc_acpi_link_adr tac5672_l0[] = {
+	{
+		.mask = BIT(0),
+		.num_adr = ARRAY_SIZE(tac5672_0_adr),
+		.adr_d = tac5672_0_adr,
+	},
+	{}
+};
+
+static const struct snd_soc_acpi_link_adr tac5682_l0[] = {
+	{
+		.mask = BIT(0),
+		.num_adr = ARRAY_SIZE(tac5682_0_adr),
+		.adr_d = tac5682_0_adr,
+	},
+	{}
+};
+
 static const struct snd_soc_acpi_link_adr tas2783_link0[] = {
 	{
 		.mask = BIT(0),
@@ -1047,6 +1146,15 @@ static const struct snd_soc_acpi_link_adr tas2783_link0[] = {
 	{}
 };
 
+static const struct snd_soc_acpi_link_adr tas2883_l0[] = {
+	{
+		.mask = BIT(0),
+		.num_adr = ARRAY_SIZE(tas2883_0_adr),
+		.adr_d = tas2883_0_adr,
+	},
+	{}
+};
+
 static const struct snd_soc_acpi_link_adr cs42l42_link0_max98363_link2[] = {
 	/* Expected order: jack -> amp */
 	{
@@ -1208,12 +1316,36 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_mtl_sdw_machines[] = {
 		.drv_name = "sof_sdw",
 		.sof_tplg_filename = "sof-mtl-rt715-rt711-rt1308-mono.tplg",
 	},
+	{
+		.link_mask = BIT(0),
+		.links = tac5572_l0,
+		.drv_name = "sof_sdw",
+		.sof_tplg_filename = "sof-mtl-tac5572.tplg",
+	},
+	{
+		.link_mask = BIT(0),
+		.links = tac5672_l0,
+		.drv_name = "sof_sdw",
+		.sof_tplg_filename = "sof-mtl-tac5672.tplg",
+	},
+	{
+		.link_mask = BIT(0),
+		.links = tac5682_l0,
+		.drv_name = "sof_sdw",
+		.sof_tplg_filename = "sof-mtl-tac5682.tplg",
+	},
 	{
 		.link_mask = BIT(0),
 		.links = tas2783_link0,
 		.drv_name = "sof_sdw",
 		.sof_tplg_filename = "sof-mtl-tas2783.tplg",
 	},
+	{
+		.link_mask = BIT(0),
+		.links = tas2883_l0,
+		.drv_name = "sof_sdw",
+		.sof_tplg_filename = "sof-mtl-tas2883.tplg",
+	},
 	{
 		.link_mask = GENMASK(3, 0),
 		.links = mtl_rt713_l0_rt1316_l12_rt1713_l3,
Signature · 1 line
2.34.1
maintainer
#6 lore raw
In reply to Niranjan H Y
Quoted 6 lines · Niranjan H Y

ASoC: Add TI TAC5XX2 SoundWire codec driver support

This patch series adds support for Texas Instruments TAC5XX2 family of SoundWire smart amplifiers, including TAC5572, TAC5672, TAC5682, and TAS2883 devices.

Quoted 8 lines

The series includes:
- SDCA power state management helper for PDE verification
- New codec driver for TAC5XX2 family with SmartAmp, SmartMic, UAJ, and HID support
- Machine driver integration for Intel SoundWire platforms
- ACPI match entries for Intel MTL platform

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.2

Thanks!

[1/4] ASoC: SDCA: Add PDE verification reusable helper

      https://git.kernel.org/broonie/sound/c/ad1d77ef21be
[2/4] ASoC: tac5xx2-sdw: add soundwire based codec driver
      https://git.kernel.org/broonie/sound/c/6138388fab2b
[3/4] ASoC: sdw_utils: TI amp utility for tac5xx2 family
      https://git.kernel.org/broonie/sound/c/de14cc57efcb
[4/4] ASoC: tac5xx2-sdw: ACPI match for intel mtl platform
      https://git.kernel.org/broonie/sound/c/8f39fbbfb11f

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

maintainer
#7 lore raw
In reply to Niranjan H Y
Quoted 6 lines · Niranjan H Y

ASoC: Add TI TAC5XX2 SoundWire codec driver support

This patch series adds support for Texas Instruments TAC5XX2 family of SoundWire smart amplifiers, including TAC5572, TAC5672, TAC5682, and TAS2883 devices.

Quoted 8 lines

The series includes:
- SDCA power state management helper for PDE verification
- New codec driver for TAC5XX2 family with SmartAmp, SmartMic, UAJ, and HID support
- Machine driver integration for Intel SoundWire platforms
- ACPI match entries for Intel MTL platform

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-7.2

Thanks!

[1/4] ASoC: SDCA: Add PDE verification reusable helper

      https://git.kernel.org/broonie/sound/c/cdff2e6ab890
[2/4] ASoC: tac5xx2-sdw: add soundwire based codec driver
      https://git.kernel.org/broonie/sound/c/38c89fededd5
[3/4] ASoC: sdw_utils: TI amp utility for tac5xx2 family
      https://git.kernel.org/broonie/sound/c/e812de61e9a0
[4/4] ASoC: tac5xx2-sdw: ACPI match for intel mtl platform
      https://git.kernel.org/broonie/sound/c/c4e19a93df81

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark