iio: adc: ti-ads1015: modernize driver
v4 cover iio: adc: ti-ads1015: modernize driver
This series modernizes the ti-ads1015 driver by updating its runtime PM handling, error handling, resource management, and register bitfield operations.
This series builds on the series [1] and:
- replaces SET_RUNTIME_PM_OPS() with DEFINE_RUNTIME_DEV_PM_OPS().
- sorts the driver headers.
- uses a local device pointer in probe.
- converts suitable error paths to dev_err_probe().
- drops unneeded < 0 error checks.
- converts mutex and runtime PM handling to managed resources.
- replaces custom shift macros with FIELD_PREP()/FIELD_GET().
- removes the redundant ads1015_set_conv_mode() helper.
[1] https://lore.kernel.org/all/[email protected]/
---
v4:
- Rebased the series as requested by Jonathan Cameron.
- Use devm_pm_runtime_set_active_enabled() for runtime PM setup.
- Reworked the register bitfield changes and inlined ads1015_set_conv_mode() following review feedback.
- Incorporated review feedback from Jonathan Cameron and Andy Shevchenko.
v3: https://lore.kernel.org/linux-iio/[email protected]/
Archit Anant (8):
iio: adc: ti-ads1015: use DEFINE_RUNTIME_DEV_PM_OPS()
iio: adc: ti-ads1015: sort headers alphabetically
iio: adc: ti-ads1015: use local device pointer in probe
iio: adc: ti-ads1015: use dev_err_probe() for error handling
iio: adc: ti-ads1015: drop unneeded < 0 error checks
iio: adc: ti-ads1015: Convert to managed resources
iio: adc: ti-ads1015: replace custom shift macros with FIELD_PREP/GET
iio: adc: ti-ads1015: inline ads1015_set_conv_mode()
drivers/iio/adc/ti-ads1015.c | 153 ++++++++++++++++------------------- 1 file changed, 69 insertions(+), 84 deletions(-)
Signature · 1 line
2.39.5
PATCH v4 1/8 iio: adc: ti-ads1015: use DEFINE_RUNTIME_DEV_PM_OPS()
Replace the deprecated SET_RUNTIME_PM_OPS() with the modern DEFINE_RUNTIME_DEV_PM_OPS() macro. This allows for the removal of the macro automatically handles dropping unused functions when PM is disabled.
Update the driver struct to use pm_ptr() to avoid unused variable warnings.
--- drivers/iio/adc/ti-ads1015.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/iio/adc/ti-ads1015.c +5 -7
@@ -1059,7 +1059,6 @@ static int ads1015_probe(struct i2c_client *client)return devm_iio_device_register (&client->dev, indio_dev); } -#ifdef CONFIG_PM static int ads1015_runtime_suspend (struct device *dev) {struct iio_dev *indio_dev =i2c_get_clientdata (to_i2c_client (dev));
@@ -1080,12 +1079,11 @@ static int ads1015_runtime_resume(struct device *dev)return ret; } -#endif -static const struct dev_pm_ops ads1015_pm_ops = { -SET_RUNTIME_PM_OPS (ads1015_runtime_suspend, - ads1015_runtime_resume,NULL ) -}; +static DEFINE_RUNTIME_DEV_PM_OPS(ads1015_pm_ops, + ads1015_runtime_suspend, + ads1015_runtime_resume, + NULL);static const struct ads1015_chip_data ads1015_data = { .channels = ads1015_channels,
@@ -1140,7 +1138,7 @@ static struct i2c_driver ads1015_driver = { .driver = { .name = ADS1015_DRV_NAME, .of_match_table = ads1015_of_match, - .pm = &ads1015_pm_ops, + .pm = pm_ptr(&ads1015_pm_ops), }, .probe = ads1015_probe, .id_table = ads1015_id,
Signature · 1 line
2.39.5
PATCH v4 2/8 iio: adc: ti-ads1015: sort headers alphabetically
In reply to Archit AnantReorder include headers alphabetically to comply with the preferred coding style and improve maintainability.
No functional changes.
--- drivers/iio/adc/ti-ads1015.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/iio/adc/ti-ads1015.c +9 -9
@@ -11,24 +11,24 @@* * 0x4B - ADDR connected to SCL */ -#include <linux/module.h> #include <linux/cleanup.h> +#include <linux/delay.h> +#include <linux/i2c.h> #include <linux/init.h> #include <linux/irq.h> -#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/pm_runtime.h> #include <linux/property.h> #include <linux/regmap.h> -#include <linux/pm_runtime.h> -#include <linux/mutex.h> -#include <linux/delay.h> +#include <linux/iio/buffer.h> +#include <linux/iio/events.h> #include <linux/iio/iio.h> -#include <linux/iio/types.h> #include <linux/iio/sysfs.h> -#include <linux/iio/events.h> -#include <linux/iio/buffer.h> -#include <linux/iio/triggered_buffer.h> #include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/types.h> #define ADS1015_DRV_NAME "ads1015"
Signature · 1 line
2.39.5
PATCH v4 3/8 iio: adc: ti-ads1015: use local device pointer in probe
In reply to Archit AnantIntroduce a local device pointer 'dev' in ads1015_probe to avoid accessing &client->dev repeatedly.
--- drivers/iio/adc/ti-ads1015.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)
drivers/iio/adc/ti-ads1015.c +11 -10
@@ -944,6 +944,7 @@ static void ads1015_power_down(void *p)static int ads1015_probe (struct i2c_client *client) {const struct ads1015_chip_data *chip; +struct device *dev = &client->dev;struct iio_dev *indio_dev;struct ads1015_data *data;int ret;
@@ -951,9 +952,9 @@ static int ads1015_probe(struct i2c_client *client) chip =i2c_get_match_data (client);if (!chip) -return dev_err_probe (&client->dev, -EINVAL ,"Unknown chip\n" ); +return dev_err_probe (dev, -EINVAL ,"Unknown chip\n" ); - indio_dev =devm_iio_device_alloc (&client->dev,sizeof (*data)); + indio_dev =devm_iio_device_alloc (dev,sizeof (*data));if (!indio_dev)return -ENOMEM ;
@@ -993,7 +994,7 @@ static int ads1015_probe(struct i2c_client *client)return PTR_ERR (data->regmap); } - ret =devm_iio_triggered_buffer_setup (&client->dev, indio_dev,NULL , + ret =devm_iio_triggered_buffer_setup (dev, indio_dev,NULL , ads1015_trigger_handler, &ads1015_buffer_setup_ops);if (ret <0 ) {
@@ -1029,7 +1030,7 @@ static int ads1015_probe(struct i2c_client *client)if (ret)return ret; - ret =devm_request_threaded_irq (&client->dev, client->irq, + ret =devm_request_threaded_irq (dev, client->irq,NULL , ads1015_event_handler, irq_trig |IRQF_ONESHOT , client->name, indio_dev);
@@ -1041,22 +1042,22 @@ static int ads1015_probe(struct i2c_client *client)if (ret)return ret; - ret =devm_add_action_or_reset (&client->dev, ads1015_power_down, data); + ret =devm_add_action_or_reset (dev, ads1015_power_down, data);if (ret)return ret; data->conv_invalid = true; - ret =pm_runtime_set_active (&client->dev); + ret =pm_runtime_set_active (dev);if (ret)return ret; -pm_runtime_set_autosuspend_delay (&client->dev,ADS1015_SLEEP_DELAY_MS ); -pm_runtime_use_autosuspend (&client->dev); - ret =devm_pm_runtime_enable (&client->dev); +pm_runtime_set_autosuspend_delay (dev,ADS1015_SLEEP_DELAY_MS ); +pm_runtime_use_autosuspend (dev); + ret =devm_pm_runtime_enable (dev);if (ret)return ret; -return devm_iio_device_register (&client->dev, indio_dev); +return devm_iio_device_register (dev, indio_dev); }static int ads1015_runtime_suspend (struct device *dev)
Signature · 1 line
2.39.5
Re: [PATCH v4 3/8] iio: adc: ti-ads1015: use local device pointer in probe
Quoted 1 line · Archit Anant
Introduce a local device pointer 'dev' in
ads1015_probeto
ads1015_probe()
Quoted 1 line
avoid accessing
&client->devrepeatedly.
...
drivers/iio/adc/ti-ads1015.c static int ads1015_probe(struct i2c_client *client) · line 955
Quoted 4 lines
drivers/iio/adc/ti-ads1015.c +1
-1chip =i2c_get_match_data (client);if (!chip) -return dev_err_probe (&client->dev, -EINVAL ,"Unknown chip\n" ); +return dev_err_probe (dev, -EINVAL ,"Unknown chip\n" );
Please, add a patch that converts EINVAL to ENODATA here.
Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH v4 4/8 iio: adc: ti-ads1015: use dev_err_probe() for error handling
In reply to Archit AnantSimplify the error handling paths in ads1015_probe() and ads1015_client_get_channels_config() by converting dev_err() calls that are immediately followed by a return statement over to the modern dev_err_probe() helper.
Note: This patch takes advantage of the previously introduced local 'dev' pointer when converting the legacy dev_err(&client->dev, ...) calls, avoiding unnecessary code churn.
--- drivers/iio/adc/ti-ads1015.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-)
drivers/iio/adc/ti-ads1015.c +12 -16
@@ -883,18 +883,16 @@ static int ads1015_client_get_channels_config(struct i2c_client *client)if (!fwnode_property_read_u32 (node,"ti,gain" , &pval)) { pga = pval; -if (pga >5 ) { -dev_err (dev,"invalid gain on %pfw\n" , node); -return -EINVAL ; - } +if (pga >5 ) +return dev_err_probe (dev, -EINVAL , +"invalid gain on %pfw\n" , node); }if (!fwnode_property_read_u32 (node,"ti,datarate" , &pval)) { data_rate = pval; -if (data_rate >7 ) { -dev_err (dev,"invalid data_rate on %pfw\n" , node); -return -EINVAL ; - } +if (data_rate >7 ) +return dev_err_probe (dev, -EINVAL , +"invalid data_rate on %pfw\n" , node); } data->channel_data[channel].pga = pga;
@@ -989,18 +987,16 @@ static int ads1015_probe(struct i2c_client *client) data->regmap =devm_regmap_init_i2c (client, chip->has_comparator ? &ads1015_regmap_config : &tla2024_regmap_config); -if (IS_ERR (data->regmap)) { -dev_err (&client->dev,"Failed to allocate register map\n" ); -return PTR_ERR (data->regmap); - } +if (IS_ERR (data->regmap)) +return dev_err_probe (dev,PTR_ERR (data->regmap), +"Failed to allocate register map\n" ); ret =devm_iio_triggered_buffer_setup (dev, indio_dev,NULL , ads1015_trigger_handler, &ads1015_buffer_setup_ops); -if (ret <0 ) { -dev_err (&client->dev,"iio triggered buffer setup failed\n" ); -return ret; - } +if (ret <0 ) +return dev_err_probe (dev, ret, +"iio triggered buffer setup failed\n" );if (client->irq && chip->has_comparator) {unsigned long irq_trig =irq_get_trigger_type (client->irq);
Signature · 1 line
2.39.5
PATCH v4 5/8 iio: adc: ti-ads1015: drop unneeded < 0 error checks
In reply to Archit AnantSeveral functions in the driver only return 0 on success or a negative error code on failure.
Change the error checking to align with standard kernel coding style.
--- drivers/iio/adc/ti-ads1015.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/iio/adc/ti-ads1015.c +3 -3
@@ -539,7 +539,7 @@ static int __ads1015_read_info_raw(struct ads1015_data *data,return -EBUSY ; ret =ads1015_set_power_state (data, true); -if (ret <0 ) +if (ret)return ret; ret =ads1015_get_adc_result (data, chan->address, val);
@@ -727,7 +727,7 @@ static int ads1015_enable_event_config(struct ads1015_data *data,return ret; ret =ads1015_set_power_state (data, true); -if (ret <0 ) +if (ret)return ret;ads1015_event_channel_enable (data, chan->address, comp_mode);
@@ -994,7 +994,7 @@ static int ads1015_probe(struct i2c_client *client) ret =devm_iio_triggered_buffer_setup (dev, indio_dev,NULL , ads1015_trigger_handler, &ads1015_buffer_setup_ops); -if (ret <0 ) +if (ret)return dev_err_probe (dev, ret,"iio triggered buffer setup failed\n" );
Signature · 1 line
2.39.5
PATCH v4 6/8 iio: adc: ti-ads1015: Convert to managed resources
In reply to Archit AnantUse managed resource helpers for the mutex and runtime PM setup.
Replace mutex_init() with devm_mutex_init() and replace the separate pm_runtime_set_active() and devm_pm_runtime_enable() calls with devm_pm_runtime_set_active_enabled().
This simplifies resource management and ensures resources are automatically cleaned up on probe failure and device removal.
--- drivers/iio/adc/ti-ads1015.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/iio/adc/ti-ads1015.c +4 -5
@@ -959,7 +959,9 @@ static int ads1015_probe(struct i2c_client *client) data =iio_priv (indio_dev);i2c_set_clientdata (client, indio_dev); -mutex_init (&data->lock); + ret =devm_mutex_init (dev, &data->lock); +if (ret) +return ret; indio_dev->name =ADS1015_DRV_NAME ; indio_dev->modes =INDIO_DIRECT_MODE ;
@@ -1044,12 +1046,9 @@ static int ads1015_probe(struct i2c_client *client) data->conv_invalid = true; - ret =pm_runtime_set_active (dev); -if (ret) -return ret;pm_runtime_set_autosuspend_delay (dev,ADS1015_SLEEP_DELAY_MS );pm_runtime_use_autosuspend (dev); - ret =devm_pm_runtime_enable (dev); + ret =devm_pm_runtime_set_active_enabled (dev);if (ret)return ret;
Signature · 1 line
2.39.5
Re: [PATCH v4 6/8] iio: adc: ti-ads1015: Convert to managed resources
Quoted 8 lines · Archit Anant
Use managed resource helpers for the mutex and runtime PM setup.
Replace
mutex_init()withdevm_mutex_init()and replace the separatepm_runtime_set_active()anddevm_pm_runtime_enable()calls withdevm_pm_runtime_set_active_enabled().This simplifies resource management and ensures resources are automatically cleaned up on probe failure and device removal.
...
drivers/iio/adc/ti-ads1015.c static int ads1015_probe(struct i2c_client *client) · line 964
Quoted 7 lines
drivers/iio/adc/ti-ads1015.c +3
-1data =iio_priv (indio_dev);i2c_set_clientdata (client, indio_dev); -mutex_init (&data->lock); + ret =devm_mutex_init (dev, &data->lock); +if (ret) +return ret;
This part is good and maybe introduced in a separate commit (depends on the resolution for the below).
...
drivers/iio/adc/ti-ads1015.c static int ads1015_probe(struct i2c_client *client) · line 1053
Quoted 9 lines
drivers/iio/adc/ti-ads1015.c +1
-4- ret =pm_runtime_set_active (dev); -if (ret) -return ret;pm_runtime_set_autosuspend_delay (dev,ADS1015_SLEEP_DELAY_MS );pm_runtime_use_autosuspend (dev); - ret =devm_pm_runtime_enable (dev); + ret =devm_pm_runtime_set_active_enabled (dev);if (ret)return ret;
This should be done with care. There were some changes lately that actually moved from devm_*() back to regular calls due to some races in runtime PM.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Jonathan Cameron
maintainerRe: [PATCH v4 6/8] iio: adc: ti-ads1015: Convert to managed resources
Quoted 26 lines · Andy Shevchenko
Quoted 8 lines · Archit Anant
Use managed resource helpers for the mutex and runtime PM setup.
Replace
mutex_init()withdevm_mutex_init()and replace the separatepm_runtime_set_active()anddevm_pm_runtime_enable()calls withdevm_pm_runtime_set_active_enabled().This simplifies resource management and ensures resources are automatically cleaned up on probe failure and device removal.
...
drivers/iio/adc/ti-ads1015.c static int ads1015_probe(struct i2c_client *client) · line 964
Quoted 7 lines
drivers/iio/adc/ti-ads1015.c +3
-1data =iio_priv (indio_dev);i2c_set_clientdata (client, indio_dev); -mutex_init (&data->lock); + ret =devm_mutex_init (dev, &data->lock); +if (ret) +return ret;This part is good and maybe introduced in a separate commit (depends on the resolution for the below).
...
Quoted 12 lines
drivers/iio/adc/ti-ads1015.c static int ads1015_probe(struct i2c_client *client) · line 1053
Quoted 9 lines
drivers/iio/adc/ti-ads1015.c +1
-4- ret =pm_runtime_set_active (dev); -if (ret) -return ret;pm_runtime_set_autosuspend_delay (dev,ADS1015_SLEEP_DELAY_MS );pm_runtime_use_autosuspend (dev); - ret =devm_pm_runtime_enable (dev); + ret =devm_pm_runtime_set_active_enabled (dev);if (ret)return ret;This should be done with care. There were some changes lately that actually moved from devm_*() back to regular calls due to some races in runtime PM.
In particular here, the patch description needs to say what this changes. It is not a noop change.
I'm not saying it is wrong, but I would do it in a seperate patch where you can clearly talk about what changes as a result of this and what affect that can be expected to have.
Jonathan
Re: [PATCH v4 6/8] iio: adc: ti-ads1015: Convert to managed resources
Quoted 38 lines · Jonathan Cameron
Quoted 36 lines · Andy Shevchenko
Quoted 8 lines · Archit Anant
Use managed resource helpers for the mutex and runtime PM setup.
Replace
mutex_init()withdevm_mutex_init()and replace the separatepm_runtime_set_active()anddevm_pm_runtime_enable()calls withdevm_pm_runtime_set_active_enabled().This simplifies resource management and ensures resources are automatically cleaned up on probe failure and device removal.
...
drivers/iio/adc/ti-ads1015.c static int ads1015_probe(struct i2c_client *client) · line 964
Quoted 7 lines
data = iio_priv(indio_dev); i2c_set_clientdata(client, indio_dev);drivers/iio/adc/ti-ads1015.c +3
-1-mutex_init (&data->lock); + ret =devm_mutex_init (dev, &data->lock); +if (ret) +return ret;This part is good and maybe introduced in a separate commit (depends on the resolution for the below).
...
Quoted 9 lines
drivers/iio/adc/ti-ads1015.c +1
-4- ret =pm_runtime_set_active (dev); -if (ret) -return ret;pm_runtime_set_autosuspend_delay (dev,ADS1015_SLEEP_DELAY_MS );pm_runtime_use_autosuspend (dev); - ret =devm_pm_runtime_enable (dev); + ret =devm_pm_runtime_set_active_enabled (dev);if (ret)return ret;
Quoted 2 lines
Quoted 2 lines
This should be done with care. There were some changes lately that actually moved from devm_*() back to regular calls due to some races in runtime PM.
I reviewed the series again. Considering Andy's concerns, I looked through other patches that included this change and the concerns raised there.
However, in this driver the runtime suspend/resume callbacks only update the conversion-mode bits through regmap. The existing ads1015_power_down() devm action also only switches the device to single-shot mode; it does not manipulate runtime-PM usage counts or shared resources such as regulators or clocks (as in other cases). Thus, I don't see a runtime-PM reference-count or resource-balance issue introduced by the conversion.
Is there a type of condition I have missed? If there is a relevant thread, I would be happy to check that out.
Quoted 7 lines
In particular here, the patch description needs to say what this changes. It is not a noop change.
I'm not saying it is wrong, but I would do it in a seperate patch where you can clearly talk about what changes as a result of this and what affect that can be expected to have.
I understand now. Although the cleanup callback itself is simple, the change to managed runtime PM also changes the teardown semantics, so it is not a no-op change. I'll move this to a separate patch and explicitly describe the behavioral change.
Signature · 2 lines
Sincerely, Archit Anant
PATCH v4 7/8 iio: adc: ti-ads1015: replace custom shift macros with FIELD_PREP/GET
In reply to Archit AnantThe driver currently uses custom _SHIFT macros and manual bitwise operations to read and write to the configuration register.
Modernize the bitwise logic by replacing all manual shifts with the standard FIELD_PREP() and FIELD_GET() macros from <linux/bitfield.h>. This improves readability and prevents potential bitwise errors.
Remove the now-unused _SHIFT macros from the top of the file.
--- drivers/iio/adc/ti-ads1015.c | 40 +++++++++++++++--------------------- 1 file changed, 16 insertions(+), 24 deletions(-)
drivers/iio/adc/ti-ads1015.c +16 -24
@@ -11,6 +11,7 @@* * 0x4B - ADDR connected to SCL */ +#include <linux/bitfield.h> #include <linux/cleanup.h> #include <linux/delay.h> #include <linux/i2c.h>
@@ -39,14 +40,7 @@#define ADS1015_LO_THRESH_REG 0x02#define ADS1015_HI_THRESH_REG 0x03 -#define ADS1015_CFG_COMP_QUE_SHIFT 0 -#define ADS1015_CFG_COMP_LAT_SHIFT 2 -#define ADS1015_CFG_COMP_POL_SHIFT 3 -#define ADS1015_CFG_COMP_MODE_SHIFT 4 -#define ADS1015_CFG_DR_SHIFT 5#define ADS1015_CFG_MOD_SHIFT 8 -#define ADS1015_CFG_PGA_SHIFT 9 -#define ADS1015_CFG_MUX_SHIFT 12#define ADS1015_CFG_COMP_QUE_MASK GENMASK(1, 0)#define ADS1015_CFG_COMP_LAT_MASK BIT(2)
@@ -408,15 +402,15 @@ int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) dr = data->channel_data[chan].data_rate; mask =ADS1015_CFG_MUX_MASK |ADS1015_CFG_PGA_MASK |ADS1015_CFG_DR_MASK ; - cfg = chan <<ADS1015_CFG_MUX_SHIFT | pga <<ADS1015_CFG_PGA_SHIFT | - dr <<ADS1015_CFG_DR_SHIFT ; + cfg =FIELD_PREP (ADS1015_CFG_MUX_MASK , chan) |FIELD_PREP (ADS1015_CFG_PGA_MASK , pga) | +FIELD_PREP (ADS1015_CFG_DR_MASK , dr);if (ads1015_event_channel_enabled (data)) { mask |=ADS1015_CFG_COMP_QUE_MASK |ADS1015_CFG_COMP_MODE_MASK ; - cfg |= data->thresh_data[chan].comp_queue << -ADS1015_CFG_COMP_QUE_SHIFT | - data->comp_mode << -ADS1015_CFG_COMP_MODE_SHIFT ; + cfg |=FIELD_PREP (ADS1015_CFG_COMP_QUE_MASK , + data->thresh_data[chan].comp_queue) | +FIELD_PREP (ADS1015_CFG_COMP_MODE_MASK , + data->comp_mode); } cfg = (old & ~mask) | (cfg & mask);
@@ -427,7 +421,7 @@ int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) data->conv_invalid = true; }if (data->conv_invalid) { - dr_old = (old &ADS1015_CFG_DR_MASK ) >>ADS1015_CFG_DR_SHIFT ; + dr_old =FIELD_GET (ADS1015_CFG_DR_MASK , old); conv_time =DIV_ROUND_UP (USEC_PER_SEC , data_rate[dr_old]); conv_time +=DIV_ROUND_UP (USEC_PER_SEC , data_rate[dr]); conv_time += conv_time /10 ;/* 10% internal clock inaccuracy */
@@ -744,6 +738,7 @@ static int ads1015_enable_event_config(struct ads1015_data *data,static int ads1015_disable_event_config (struct ads1015_data *data,const struct iio_chan_spec *chan,int comp_mode) { +unsigned int val =FIELD_PREP (ADS1015_CFG_COMP_QUE_MASK ,ADS1015_CFG_COMP_DISABLE );int ret;if (!ads1015_event_channel_enabled (data))
@@ -756,10 +751,7 @@ static int ads1015_disable_event_config(struct ads1015_data *data, comp_mode == ADS1015_CFG_COMP_MODE_WINDOW)return 0 ; - ret =regmap_update_bits (data->regmap,ADS1015_CFG_REG , -ADS1015_CFG_COMP_QUE_MASK , -ADS1015_CFG_COMP_DISABLE << -ADS1015_CFG_COMP_QUE_SHIFT ); + ret =regmap_update_bits (data->regmap,ADS1015_CFG_REG ,ADS1015_CFG_COMP_QUE_MASK , val);if (ret)return ret;
@@ -1005,19 +997,19 @@ static int ads1015_probe(struct i2c_client *client)unsigned int cfg_comp_mask =ADS1015_CFG_COMP_QUE_MASK |ADS1015_CFG_COMP_LAT_MASK |ADS1015_CFG_COMP_POL_MASK ;unsigned int cfg_comp = -ADS1015_CFG_COMP_DISABLE <<ADS1015_CFG_COMP_QUE_SHIFT | -1 <<ADS1015_CFG_COMP_LAT_SHIFT ; +FIELD_PREP (ADS1015_CFG_COMP_QUE_MASK ,ADS1015_CFG_COMP_DISABLE ) | +FIELD_PREP (ADS1015_CFG_COMP_LAT_MASK ,1 );switch (irq_trig) {case IRQF_TRIGGER_FALLING :case IRQF_TRIGGER_LOW : - cfg_comp |=ADS1015_CFG_COMP_POL_LOW << -ADS1015_CFG_COMP_POL_SHIFT ; + cfg_comp |=FIELD_PREP (ADS1015_CFG_COMP_POL_MASK , +ADS1015_CFG_COMP_POL_LOW );break ;case IRQF_TRIGGER_HIGH :case IRQF_TRIGGER_RISING : - cfg_comp |=ADS1015_CFG_COMP_POL_HIGH << -ADS1015_CFG_COMP_POL_SHIFT ; + cfg_comp |=FIELD_PREP (ADS1015_CFG_COMP_POL_MASK , +ADS1015_CFG_COMP_POL_HIGH );break ;default :return -EINVAL ;
Signature · 1 line
2.39.5
Re: [PATCH v4 7/8] iio: adc: ti-ads1015: replace custom shift macros with FIELD_PREP/GET
Quoted 8 lines · Archit Anant
The driver currently uses custom
_SHIFTmacros and manual bitwise operations to read and write to the configuration register.Modernize the bitwise logic by replacing all manual shifts with the standard
FIELD_PREP()andFIELD_GET()macros from <linux/bitfield.h>. This improves readability and prevents potential bitwise errors.Remove the now-unused
_SHIFTmacros from the top of the file.
...
drivers/iio/adc/ti-ads1015.c int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) · line 406
Quoted 2 lines
drivers/iio/adc/ti-ads1015.c +2
-0+ cfg =FIELD_PREP (ADS1015_CFG_MUX_MASK , chan) |FIELD_PREP (ADS1015_CFG_PGA_MASK , pga) | +FIELD_PREP (ADS1015_CFG_DR_MASK , dr);
Indentation is broken.
...
drivers/iio/adc/ti-ads1015.c int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val) · line 413
Quoted 4 lines
drivers/iio/adc/ti-ads1015.c +4
-0+ cfg |=FIELD_PREP (ADS1015_CFG_COMP_QUE_MASK , + data->thresh_data[chan].comp_queue) | +FIELD_PREP (ADS1015_CFG_COMP_MODE_MASK , + data->comp_mode);
Same issue here.
...
Quoted 3 lines
static int ads1015_disable_event_config(struct
ads1015_data*data,
const structiio_chan_spec*chan, intcomp_mode)
{
struct regmap *map = data->regmap;
drivers/iio/adc/ti-ads1015.c static int ads1015_enable_event_config(struct ads1015_data *data, · line 741
Quoted 1 line
drivers/iio/adc/ti-ads1015.c +1
-0+unsigned int val =FIELD_PREP (ADS1015_CFG_COMP_QUE_MASK ,ADS1015_CFG_COMP_DISABLE );
Split the assignment.
Quoted 1 line
int ret;
...
drivers/iio/adc/ti-ads1015.c static int ads1015_disable_event_config(struct ads1015_data *data, · line 756
Quoted 7 lines
drivers/iio/adc/ti-ads1015.c +1
-4- ret =regmap_update_bits (data->regmap,ADS1015_CFG_REG , -ADS1015_CFG_COMP_QUE_MASK , -ADS1015_CFG_COMP_DISABLE << -ADS1015_CFG_COMP_QUE_SHIFT ); + ret =regmap_update_bits (data->regmap,ADS1015_CFG_REG ,ADS1015_CFG_COMP_QUE_MASK , val);if (ret)return ret;
val = FIELD_PREP(ADS1015_CFG_COMP_QUE_MASK, ADS1015_CFG_COMP_DISABLE); ret = regmap_update_bits(map, ADS1015_CFG_REG, ADS1015_CFG_COMP_QUE_MASK, val);
Signature · 2 lines
With Best Regards, Andy Shevchenko
PATCH v4 8/8 iio: adc: ti-ads1015: inline ads1015_set_conv_mode()
In reply to Archit AnantThe ads1015_set_conv_mode() helper function is a single-line wrapper around regmap_update_bits().
With the transition to the FIELD_PREP() macro, the raw register updates are now self-documenting and easy to read. Remove the wrapper function and inline the regmap calls directly at the call sites.
This also allows for the removal of the final custom shift macro, ADS1015_CFG_MOD_SHIFT.
--- drivers/iio/adc/ti-ads1015.c | 27 +++++++++++++-------------- 1 file changed, 13 insertions(+), 14 deletions(-)
drivers/iio/adc/ti-ads1015.c +13 -14
@@ -40,8 +40,6 @@#define ADS1015_LO_THRESH_REG 0x02#define ADS1015_HI_THRESH_REG 0x03 -#define ADS1015_CFG_MOD_SHIFT 8 -#define ADS1015_CFG_COMP_QUE_MASK GENMASK(1, 0)#define ADS1015_CFG_COMP_LAT_MASK BIT(2)#define ADS1015_CFG_COMP_POL_MASK BIT(3)
@@ -739,6 +737,7 @@ static int ads1015_disable_event_config(struct ads1015_data *data, const struct iio_chan_spec *chan, int comp_mode) { unsigned int val = FIELD_PREP(ADS1015_CFG_COMP_QUE_MASK, ADS1015_CFG_COMP_DISABLE); +struct regmap *map = data->regmap;int ret;if (!ads1015_event_channel_enabled (data))
@@ -751,7 +750,7 @@ static int ads1015_disable_event_config(struct ads1015_data *data, comp_mode == ADS1015_CFG_COMP_MODE_WINDOW)return 0 ; - ret =regmap_update_bits (data->regmap,ADS1015_CFG_REG ,ADS1015_CFG_COMP_QUE_MASK , val); + ret =regmap_update_bits (map,ADS1015_CFG_REG ,ADS1015_CFG_COMP_QUE_MASK , val);if (ret)return ret;
@@ -913,19 +912,14 @@ static void ads1015_get_channels_config(struct i2c_client *client) } } -static int ads1015_set_conv_mode (struct ads1015_data *data,int mode) -{ -return regmap_update_bits (data->regmap,ADS1015_CFG_REG , -ADS1015_CFG_MOD_MASK , - mode <<ADS1015_CFG_MOD_SHIFT ); -} -static void ads1015_power_down (void *p) { +unsigned int val =FIELD_PREP (ADS1015_CFG_MOD_MASK ,ADS1015_SINGLESHOT );struct ads1015_data *data = p; +struct regmap *map = data->regmap;int ret; - ret =ads1015_set_conv_mode (data,ADS1015_SINGLESHOT ); + ret =regmap_update_bits (map,ADS1015_CFG_REG ,ADS1015_CFG_MOD_MASK , val);if (ret)dev_warn (regmap_get_device (data->regmap),"Failed to power down (%pe)\n" ,ERR_PTR (ret));
@@ -933,6 +927,7 @@ static void ads1015_power_down(void *p)static int ads1015_probe (struct i2c_client *client) { +unsigned int cfg_mode =FIELD_PREP (ADS1015_CFG_MOD_MASK ,ADS1015_CONTINUOUS );const struct ads1015_chip_data *chip;struct device *dev = &client->dev;struct iio_dev *indio_dev;
@@ -1028,7 +1023,7 @@ static int ads1015_probe(struct i2c_client *client)return ret; } - ret =ads1015_set_conv_mode (data,ADS1015_CONTINUOUS ); + ret =regmap_update_bits (data->regmap,ADS1015_CFG_REG ,ADS1015_CFG_MOD_MASK , cfg_mode);if (ret)return ret;
@@ -1049,19 +1044,23 @@ static int ads1015_probe(struct i2c_client *client)static int ads1015_runtime_suspend (struct device *dev) { +unsigned int val =FIELD_PREP (ADS1015_CFG_MOD_MASK ,ADS1015_SINGLESHOT );struct iio_dev *indio_dev =i2c_get_clientdata (to_i2c_client (dev));struct ads1015_data *data =iio_priv (indio_dev); +struct regmap *map = data->regmap; -return ads1015_set_conv_mode (data,ADS1015_SINGLESHOT ); +return regmap_update_bits (map,ADS1015_CFG_REG ,ADS1015_CFG_MOD_MASK , val); }static int ads1015_runtime_resume (struct device *dev) { +unsigned int val =FIELD_PREP (ADS1015_CFG_MOD_MASK ,ADS1015_CONTINUOUS );struct iio_dev *indio_dev =i2c_get_clientdata (to_i2c_client (dev));struct ads1015_data *data =iio_priv (indio_dev); +struct regmap *map = data->regmap;int ret; - ret =ads1015_set_conv_mode (data,ADS1015_CONTINUOUS ); + ret =regmap_update_bits (map,ADS1015_CFG_REG ,ADS1015_CFG_MOD_MASK , val);if (!ret) data->conv_invalid = true;
Signature · 1 line
2.39.5
Re: [PATCH v4 8/8] iio: adc: ti-ads1015: inline ads1015_set_conv_mode()
Quoted 9 lines · Archit Anant
The
ads1015_set_conv_mode()helper function is a single-line wrapper aroundregmap_update_bits().With the transition to the
FIELD_PREP()macro, the raw register updates are now self-documenting and easy to read. Remove the wrapper function and inline the regmap calls directly at the call sites.This also allows for the removal of the final custom shift macro,
ADS1015_CFG_MOD_SHIFT.
Ah, this patch should be done before previous one, so that one will use 'map'.
Signature · 2 lines
With Best Regards, Andy Shevchenko