Skip to contentSkip to conversation

iio: adc: ti-ads1015: modernize resource management and bitfield logic

PATCH Superseded Archit Anant 4 participants 19 messages Sep 30 – Oct 19 IIO

v5 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v5 cover iio: adc: ti-ads1015: modernize resource management and bitfield logic

This series modernizes the ti-ads1015 driver by updating its runtime PM handling, error handling, resource management, and register bitfield operations.

This series builds on top of Stepan Ionichev's devm error path fix [1] and:
- Replaces SET_RUNTIME_PM_OPS() with DEFINE_RUNTIME_DEV_PM_OPS().
- Sorts the driver headers alphabetically.
- Returns -ENODATA when match data is missing.
- Uses a local device pointer in probe.
- Converts suitable error paths to dev_err_probe().
- Drops unneeded '< 0' error checks for functions returning 0 or error.
- Converts mutex initialization to devm_mutex_init().
- Transitions runtime PM setup to devm_pm_runtime_set_active_enabled().
- Inlines the redundant ads1015_set_conv_mode() helper.
- Replaces custom shift macros with FIELD_PREP()/FIELD_GET().

[1] https://lore.kernel.org/all/[email protected]/

---
v5:
- Reordered patches: inlined ads1015_set_conv_mode() before applying FIELD_PREP() to completely eliminate code churn.
- Extracted FIELD_PREP() evaluations into local variables for regmap_update_bits() calls to ensure clean line lengths and readability.
- Added a patch to return -ENODATA when i2c_get_match_data() fails, as requested by Andy Shevchenko.
- Split devm_mutex_init() into its own patch to decouple it from the runtime PM modernization, as requested by Andy Shevchenko.

v4: https://lore.kernel.org/linux-iio/[email protected]/

Archit Anant (10):
iio: adc: ti-ads1015: use DEFINE_RUNTIME_DEV_PM_OPS()
iio: adc: ti-ads1015: sort headers alphabetically
iio: adc: ti-ads1015: return -ENODATA when match data is missing
iio: adc: ti-ads1015: use local device pointer in probe
iio: adc: ti-ads1015: use dev_err_probe() for error handling
iio: adc: ti-ads1015: drop unneeded < 0 error checks
iio: adc: ti-ads1015: use devm_mutex_init()
iio: adc: ti-ads1015: use managed runtime PM setup
iio: adc: ti-ads1015: inline ads1015_set_conv_mode()
iio: adc: ti-ads1015: replace custom shift macros with FIELD_PREP/GET

 drivers/iio/adc/ti-ads1015.c | 160 +++++++++++++++++------------------
 1 file changed, 76 insertions(+), 84 deletions(-)
Signature · 1 line
2.39.5
#1 lore raw

PATCH v5 1/10 iio: adc: ti-ads1015: use DEFINE_RUNTIME_DEV_PM_OPS()

Replace the deprecated SET_RUNTIME_PM_OPS() with the modern DEFINE_RUNTIME_DEV_PM_OPS() macro. This allows for the removal of the macro automatically handles dropping unused functions when PM is disabled.

Update the driver struct to use pm_ptr() to avoid unused variable warnings.

---
 drivers/iio/adc/ti-ads1015.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/iio/adc/ti-ads1015.c +5 -7
index 0fbfa4e499aa..93a165c5416a 100644
@@ -1059,7 +1059,6 @@ static int ads1015_probe(struct i2c_client *client)
 	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
-#ifdef CONFIG_PM
 static int ads1015_runtime_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
@@ -1080,12 +1079,11 @@ static int ads1015_runtime_resume(struct device *dev)
 
 	return ret;
 }
-#endif
 
-static const struct dev_pm_ops ads1015_pm_ops = {
-	SET_RUNTIME_PM_OPS(ads1015_runtime_suspend,
-			   ads1015_runtime_resume, NULL)
-};
+static DEFINE_RUNTIME_DEV_PM_OPS(ads1015_pm_ops,
+				 ads1015_runtime_suspend,
+				 ads1015_runtime_resume,
+				 NULL);
 
 static const struct ads1015_chip_data ads1015_data = {
 	.channels	= ads1015_channels,
@@ -1140,7 +1138,7 @@ static struct i2c_driver ads1015_driver = {
 	.driver = {
 		.name = ADS1015_DRV_NAME,
 		.of_match_table = ads1015_of_match,
-		.pm = &ads1015_pm_ops,
+		.pm = pm_ptr(&ads1015_pm_ops),
 	},
 	.probe		= ads1015_probe,
 	.id_table	= ads1015_id,
Signature · 1 line
2.39.5
maintainer
#2 lore raw

Re: [PATCH v5 01/10] iio: adc: ti-ads1015: use DEFINE_RUNTIME_DEV_PM_OPS()

Quoted 4 lines · On Wed, 30 Sep 2026 22:41:55 +0530 Archit Anant <[email protected]> wrote:

Replace the deprecated SET_RUNTIME_PM_OPS() with the modern DEFINE_RUNTIME_DEV_PM_OPS() macro. This allows for the removal of the macro automatically handles dropping unused functions when PM is disabled.

Hi Archit,

It does more than that... Take a look at the definition of that macro. Key is it also uses the runtime callbacks for suspend and resume (the sleep PM operations).

That shouldn't be a problem but good to make it clear this is a functional change and to have a good think about whether that matters.

Thanks,

Jonathan

Quoted 47 lines

Update the driver struct to use pm_ptr() to avoid unused variable warnings.

---
 drivers/iio/adc/ti-ads1015.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
drivers/iio/adc/ti-ads1015.c +5 -7
index 0fbfa4e499aa..93a165c5416a 100644
@@ -1059,7 +1059,6 @@ static int ads1015_probe(struct i2c_client *client)
 	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
-#ifdef CONFIG_PM
 static int ads1015_runtime_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
@@ -1080,12 +1079,11 @@ static int ads1015_runtime_resume(struct device *dev)
 
 	return ret;
 }
-#endif
 
-static const struct dev_pm_ops ads1015_pm_ops = {
-	SET_RUNTIME_PM_OPS(ads1015_runtime_suspend,
-			   ads1015_runtime_resume, NULL)
-};
+static DEFINE_RUNTIME_DEV_PM_OPS(ads1015_pm_ops,
+				 ads1015_runtime_suspend,
+				 ads1015_runtime_resume,
+				 NULL);
 
 static const struct ads1015_chip_data ads1015_data = {
 	.channels	= ads1015_channels,
@@ -1140,7 +1138,7 @@ static struct i2c_driver ads1015_driver = {
 	.driver = {
 		.name = ADS1015_DRV_NAME,
 		.of_match_table = ads1015_of_match,
-		.pm = &ads1015_pm_ops,
+		.pm = pm_ptr(&ads1015_pm_ops),
 	},
 	.probe		= ads1015_probe,
 	.id_table	= ads1015_id,
#3 lore raw

PATCH v5 2/10 iio: adc: ti-ads1015: sort headers alphabetically

In reply to Archit Anant

Reorder include headers alphabetically to comply with the preferred coding style and improve maintainability.

No functional changes.

---
 drivers/iio/adc/ti-ads1015.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/iio/adc/ti-ads1015.c +9 -9
index 93a165c5416a..ef03b74bda3e 100644
@@ -11,24 +11,24 @@
  *	* 0x4B - ADDR connected to SCL
  */
 
-#include <linux/module.h>
 #include <linux/cleanup.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
-#include <linux/pm_runtime.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
 
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
 #include <linux/iio/iio.h>
-#include <linux/iio/types.h>
 #include <linux/iio/sysfs.h>
-#include <linux/iio/events.h>
-#include <linux/iio/buffer.h>
-#include <linux/iio/triggered_buffer.h>
 #include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/types.h>
 
 #define ADS1015_DRV_NAME "ads1015"
 
Signature · 1 line
2.39.5
#4 lore raw

Re: [PATCH v5 02/10] iio: adc: ti-ads1015: sort headers alphabetically

Quoted 35 lines · On Wed, 30 Sep 2026 22:41:56 +0530 Archit Anant <[email protected]> wrote:

Reorder include headers alphabetically to comply with the preferred coding style and improve maintainability.

No functional changes.

---
 drivers/iio/adc/ti-ads1015.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
drivers/iio/adc/ti-ads1015.c +6 -5
index 93a165c5416a..ef03b74bda3e 100644
@@ -11,24 +11,24 @@
  *	* 0x4B - ADDR connected to SCL
  */
 
-#include <linux/module.h>
 #include <linux/cleanup.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pm_runtime.h>
 #include <linux/property.h>
 #include <linux/regmap.h>
-#include <linux/pm_runtime.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
 
+#include <linux/iio/buffer.h>

drivers/iio/adc/ti-ads1015.c line 31

Quoted 10 lines
drivers/iio/adc/ti-ads1015.c +3 -4
+#include <linux/iio/events.h>
 #include <linux/iio/iio.h>
-#include <linux/iio/types.h>
 #include <linux/iio/sysfs.h>
-#include <linux/iio/events.h>
-#include <linux/iio/buffer.h>
-#include <linux/iio/triggered_buffer.h>
 #include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/types.h>

Small nit, but I'd drop iio/types.h as it is included by iio/iio.h (No need to send a new version though, this can be addressed in the future).

Quoted 2 lines
drivers/iio/adc/ti-ads1015.c +0 -0
 #define ADS1015_DRV_NAME "ads1015"
 
Signature · 2 lines
Kind regards,
Joshua Crofts
#5 lore raw

PATCH v5 3/10 iio: adc: ti-ads1015: return -ENODATA when match data is missing

In reply to Archit Anant

When i2c_get_match_data() returns NULL, it indicates that driver match data is absent rather than an invalid argument being provided.

Return -ENODATA instead of -EINVAL to more accurately reflect the failure.

---
 drivers/iio/adc/ti-ads1015.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iio/adc/ti-ads1015.c +1 -1
index ef03b74bda3e..9479f110448d 100644
@@ -951,7 +951,7 @@ static int ads1015_probe(struct i2c_client *client)
 
 	chip = i2c_get_match_data(client);
 	if (!chip)
-		return dev_err_probe(&client->dev, -EINVAL, "Unknown chip\n");
+		return dev_err_probe(&client->dev, -ENODATA, "Unknown chip\n");
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
Signature · 1 line
2.39.5
#6 lore raw

Re: [PATCH v5 03/10] iio: adc: ti-ads1015: return -ENODATA when match data is missing

Quoted 4 lines · Archit Anant

When i2c_get_match_data() returns NULL, it indicates that driver match data is absent rather than an invalid argument being provided.

Return -ENODATA instead of -EINVAL to more accurately reflect the failure.

If you arrange this patch after the next one, you may reduce the churn by switching to local 'dev' variable at the same time. It might be even not needed to describe as it's just a small detail that doesn't change anything in the behaviour of the code.

But no need to resend just for that.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#7 lore raw

PATCH v5 4/10 iio: adc: ti-ads1015: use local device pointer in probe

In reply to Archit Anant

Introduce a local device pointer 'dev' in ads1015_probe() to avoid accessing &client->dev repeatedly.

---
 drivers/iio/adc/ti-ads1015.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)
drivers/iio/adc/ti-ads1015.c +11 -10
index 9479f110448d..85280200d050 100644
@@ -944,6 +944,7 @@ static void ads1015_power_down(void *p)
 static int ads1015_probe(struct i2c_client *client)
 {
 	const struct ads1015_chip_data *chip;
+	struct device *dev = &client->dev;
 	struct iio_dev *indio_dev;
 	struct ads1015_data *data;
 	int ret;
@@ -951,9 +952,9 @@ static int ads1015_probe(struct i2c_client *client)
 
 	chip = i2c_get_match_data(client);
 	if (!chip)
-		return dev_err_probe(&client->dev, -ENODATA, "Unknown chip\n");
+		return dev_err_probe(dev, -ENODATA, "Unknown chip\n");
 
-	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
 
@@ -993,7 +994,7 @@ static int ads1015_probe(struct i2c_client *client)
 		return PTR_ERR(data->regmap);
 	}
 
-	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev, NULL,
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
 					      ads1015_trigger_handler,
 					      &ads1015_buffer_setup_ops);
 	if (ret < 0) {
@@ -1029,7 +1030,7 @@ static int ads1015_probe(struct i2c_client *client)
 		if (ret)
 			return ret;
 
-		ret = devm_request_threaded_irq(&client->dev, client->irq,
+		ret = devm_request_threaded_irq(dev, client->irq,
 						NULL, ads1015_event_handler,
 						irq_trig | IRQF_ONESHOT,
 						client->name, indio_dev);
@@ -1041,22 +1042,22 @@ static int ads1015_probe(struct i2c_client *client)
 	if (ret)
 		return ret;
 
-	ret = devm_add_action_or_reset(&client->dev, ads1015_power_down, data);
+	ret = devm_add_action_or_reset(dev, ads1015_power_down, data);
 	if (ret)
 		return ret;
 
 	data->conv_invalid = true;
 
-	ret = pm_runtime_set_active(&client->dev);
+	ret = pm_runtime_set_active(dev);
 	if (ret)
 		return ret;
-	pm_runtime_set_autosuspend_delay(&client->dev, ADS1015_SLEEP_DELAY_MS);
-	pm_runtime_use_autosuspend(&client->dev);
-	ret = devm_pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(dev, ADS1015_SLEEP_DELAY_MS);
+	pm_runtime_use_autosuspend(dev);
+	ret = devm_pm_runtime_enable(dev);
 	if (ret)
 		return ret;
 
-	return devm_iio_device_register(&client->dev, indio_dev);
+	return devm_iio_device_register(dev, indio_dev);
 }
 
 static int ads1015_runtime_suspend(struct device *dev)
Signature · 1 line
2.39.5
#8 lore raw

PATCH v5 5/10 iio: adc: ti-ads1015: use dev_err_probe() for error handling

In reply to Archit Anant

Simplify the error handling paths in ads1015_probe() and ads1015_client_get_channels_config() by converting dev_err() calls that are immediately followed by a return statement over to the modern dev_err_probe() helper.

Note: This patch takes advantage of the previously introduced local 'dev' pointer when converting the legacy dev_err(&client->dev, ...) calls, avoiding unnecessary code churn.

---
 drivers/iio/adc/ti-ads1015.c | 28 ++++++++++++----------------
 1 file changed, 12 insertions(+), 16 deletions(-)
drivers/iio/adc/ti-ads1015.c +12 -16
index 85280200d050..34d3d31b5ddd 100644
@@ -883,18 +883,16 @@ static int ads1015_client_get_channels_config(struct i2c_client *client)
 
 		if (!fwnode_property_read_u32(node, "ti,gain", &pval)) {
 			pga = pval;
-			if (pga > 5) {
-				dev_err(dev, "invalid gain on %pfw\n", node);
-				return -EINVAL;
-			}
+			if (pga > 5)
+				return dev_err_probe(dev, -EINVAL,
+						     "invalid gain on %pfw\n", node);
 		}
 
 		if (!fwnode_property_read_u32(node, "ti,datarate", &pval)) {
 			data_rate = pval;
-			if (data_rate > 7) {
-				dev_err(dev, "invalid data_rate on %pfw\n", node);
-				return -EINVAL;
-			}
+			if (data_rate > 7)
+				return dev_err_probe(dev, -EINVAL,
+						     "invalid data_rate on %pfw\n", node);
 		}
 
 		data->channel_data[channel].pga = pga;
@@ -989,18 +987,16 @@ static int ads1015_probe(struct i2c_client *client)
 	data->regmap = devm_regmap_init_i2c(client, chip->has_comparator ?
 					    &ads1015_regmap_config :
 					    &tla2024_regmap_config);
-	if (IS_ERR(data->regmap)) {
-		dev_err(&client->dev, "Failed to allocate register map\n");
-		return PTR_ERR(data->regmap);
-	}
+	if (IS_ERR(data->regmap))
+		return dev_err_probe(dev, PTR_ERR(data->regmap),
+				     "Failed to allocate register map\n");
 
 	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
 					      ads1015_trigger_handler,
 					      &ads1015_buffer_setup_ops);
-	if (ret < 0) {
-		dev_err(&client->dev, "iio triggered buffer setup failed\n");
-		return ret;
-	}
+	if (ret < 0)
+		return dev_err_probe(dev, ret,
+				     "iio triggered buffer setup failed\n");
 
 	if (client->irq && chip->has_comparator) {
 		unsigned long irq_trig = irq_get_trigger_type(client->irq);
Signature · 1 line
2.39.5
#9 lore raw

Re: [PATCH v5 05/10] iio: adc: ti-ads1015: use dev_err_probe() for error handling

Quoted 9 lines · On Wed, 30 Sep 2026 22:41:59 +0530 Archit Anant <[email protected]> wrote:

Simplify the error handling paths in ads1015_probe() and ads1015_client_get_channels_config() by converting dev_err() calls that are immediately followed by a return statement over to the modern dev_err_probe() helper.

Note: This patch takes advantage of the previously introduced local 'dev' pointer when converting the legacy dev_err(&client->dev, ...) calls, avoiding unnecessary code churn.

This paragraph should be removed, no need to mention this.

Signature · 2 lines
Kind regards,
Joshua Crofts
#10 lore raw

PATCH v5 6/10 iio: adc: ti-ads1015: drop unneeded < 0 error checks

In reply to Archit Anant

Several functions in the driver only return 0 on success or a negative error code on failure.

Change the error checking to align with standard kernel coding style.

---
 drivers/iio/adc/ti-ads1015.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/iio/adc/ti-ads1015.c +3 -3
index 34d3d31b5ddd..6637c42e0506 100644
@@ -539,7 +539,7 @@ static int __ads1015_read_info_raw(struct ads1015_data *data,
 		return -EBUSY;
 
 	ret = ads1015_set_power_state(data, true);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = ads1015_get_adc_result(data, chan->address, val);
@@ -727,7 +727,7 @@ static int ads1015_enable_event_config(struct ads1015_data *data,
 		return ret;
 
 	ret = ads1015_set_power_state(data, true);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ads1015_event_channel_enable(data, chan->address, comp_mode);
@@ -994,7 +994,7 @@ static int ads1015_probe(struct i2c_client *client)
 	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
 					      ads1015_trigger_handler,
 					      &ads1015_buffer_setup_ops);
-	if (ret < 0)
+	if (ret)
 		return dev_err_probe(dev, ret,
 				     "iio triggered buffer setup failed\n");
 
Signature · 1 line
2.39.5
maintainer
#11 lore raw

Re: [PATCH v5 06/10] iio: adc: ti-ads1015: drop unneeded < 0 error checks

Quoted 8 lines · On Wed, 30 Sep 2026 22:42:00 +0530 Archit Anant <[email protected]> wrote:

Several functions in the driver only return 0 on success or a negative error code on failure.

Change the error checking to align with standard kernel coding style.

Hi Archit,

A patch I reviewed early today touched this same code, so I'll give some related feedback!

drivers/iio/adc/ti-ads1015.c static int __ads1015_read_info_raw(struct ads1015_data *data, · line 541

Quoted 12 lines
---
 drivers/iio/adc/ti-ads1015.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/iio/adc/ti-ads1015.c +0 -0
index 34d3d31b5ddd..6637c42e0506 100644
@@ -539,7 +539,7 @@ static int __ads1015_read_info_raw(struct ads1015_data *data,
 		return -EBUSY;
 
 	ret = ads1015_set_power_state(data, true);

Can we get rid of this _set_power_state helper? It's entirely pointless now the runtime pm code is a lot simpler than it was a few years back.

It is included in a series removing the return from the put that is on list and I asked for that there as well. Note that once you do that it will be easy to use the ACQUIRE_ magic for handling this so maybe jump directly to that instead of having this change.

Quoted 23 lines
drivers/iio/adc/ti-ads1015.c +3 -3
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ret = ads1015_get_adc_result(data, chan->address, val);
@@ -727,7 +727,7 @@ static int ads1015_enable_event_config(struct ads1015_data *data,
 		return ret;
 
 	ret = ads1015_set_power_state(data, true);
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	ads1015_event_channel_enable(data, chan->address, comp_mode);
@@ -994,7 +994,7 @@ static int ads1015_probe(struct i2c_client *client)
 	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
 					      ads1015_trigger_handler,
 					      &ads1015_buffer_setup_ops);
-	if (ret < 0)
+	if (ret)
 		return dev_err_probe(dev, ret,
 				     "iio triggered buffer setup failed\n");
 
#12 lore raw

PATCH v5 7/10 iio: adc: ti-ads1015: use devm_mutex_init()

In reply to Archit Anant

Convert mutex_init() to devm_mutex_init(). This ensures that the mutex is automatically destroyed when the device is unbound, and simplifies error handling.

---
 drivers/iio/adc/ti-ads1015.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/iio/adc/ti-ads1015.c +3 -1
index 6637c42e0506..a790f694a1a9 100644
@@ -959,7 +959,9 @@ static int ads1015_probe(struct i2c_client *client)
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 
-	mutex_init(&data->lock);
+	ret = devm_mutex_init(dev, &data->lock);
+	if (ret)
+		return ret;
 
 	indio_dev->name = ADS1015_DRV_NAME;
 	indio_dev->modes = INDIO_DIRECT_MODE;
Signature · 1 line
2.39.5
#13 lore raw

PATCH v5 8/10 iio: adc: ti-ads1015: use managed runtime PM setup

In reply to Archit Anant

Use devm_pm_runtime_set_active_enabled() to combine setting the device active and enabling runtime PM.

Previously, probe explicitly called pm_runtime_set_active() followed by devm_pm_runtime_enable(). The managed helper changes the teardown semantics by associating runtime PM enablement with the device-managed lifetime.

The runtime suspend and resume callbacks only update the conversion-mode bits through regmap. They do not manipulate runtime-PM usage counts or other shared resources such as regulators or clocks, so this change does not introduce an additional runtime-PM reference or resource-balance operation in this driver.

---
 drivers/iio/adc/ti-ads1015.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/iio/adc/ti-ads1015.c +1 -4
index a790f694a1a9..9312822218df 100644
@@ -1046,12 +1046,9 @@ static int ads1015_probe(struct i2c_client *client)
 
 	data->conv_invalid = true;
 
-	ret = pm_runtime_set_active(dev);
-	if (ret)
-		return ret;
 	pm_runtime_set_autosuspend_delay(dev, ADS1015_SLEEP_DELAY_MS);
 	pm_runtime_use_autosuspend(dev);
-	ret = devm_pm_runtime_enable(dev);
+	ret = devm_pm_runtime_set_active_enabled(dev);
 	if (ret)
 		return ret;
 
Signature · 1 line
2.39.5
#14 lore raw

PATCH v5 9/10 iio: adc: ti-ads1015: inline ads1015_set_conv_mode()

In reply to Archit Anant

The ads1015_set_conv_mode() helper function is a single-line wrapper around regmap_update_bits().

Since the function is simple and only called during initialization and power management state transitions, the wrapper is unnecessary. Remove it and inline the regmap_update_bits() logic directly at the call sites to improve code readability and traceabilty.

Where applicable, introduce a local 'map' pointer to keep the inlined function calls concise.

---
 drivers/iio/adc/ti-ads1015.c | 30 ++++++++++++++++++------------
 1 file changed, 18 insertions(+), 12 deletions(-)
drivers/iio/adc/ti-ads1015.c +18 -12
index 9312822218df..2e8f89d16586 100644
@@ -744,6 +744,7 @@ static int ads1015_enable_event_config(struct ads1015_data *data,
 static int ads1015_disable_event_config(struct ads1015_data *data,
 	const struct iio_chan_spec *chan, int comp_mode)
 {
+	struct regmap *map = data->regmap;
 	int ret;
 
 	if (!ads1015_event_channel_enabled(data))
@@ -756,7 +757,7 @@ static int ads1015_disable_event_config(struct ads1015_data *data,
 			comp_mode == ADS1015_CFG_COMP_MODE_WINDOW)
 		return 0;
 
-	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+	ret = regmap_update_bits(map, ADS1015_CFG_REG,
 				ADS1015_CFG_COMP_QUE_MASK,
 				ADS1015_CFG_COMP_DISABLE <<
 					ADS1015_CFG_COMP_QUE_SHIFT);
@@ -921,19 +922,16 @@ static void ads1015_get_channels_config(struct i2c_client *client)
 	}
 }
 
-static int ads1015_set_conv_mode(struct ads1015_data *data, int mode)
-{
-	return regmap_update_bits(data->regmap, ADS1015_CFG_REG,
-				  ADS1015_CFG_MOD_MASK,
-				  mode << ADS1015_CFG_MOD_SHIFT);
-}
-
 static void ads1015_power_down(void *p)
 {
 	struct ads1015_data *data = p;
+	struct regmap *map = data->regmap;
 	int ret;
 
-	ret = ads1015_set_conv_mode(data, ADS1015_SINGLESHOT);
+	ret = regmap_update_bits(map, ADS1015_CFG_REG,
+				 ADS1015_CFG_MOD_MASK,
+				 ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT);
+
 	if (ret)
 		dev_warn(regmap_get_device(data->regmap),
 			 "Failed to power down (%pe)\n", ERR_PTR(ret));
@@ -1036,7 +1034,9 @@ static int ads1015_probe(struct i2c_client *client)
 			return ret;
 	}
 
-	ret = ads1015_set_conv_mode(data, ADS1015_CONTINUOUS);
+	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+				 ADS1015_CFG_MOD_MASK,
+				 ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT);
 	if (ret)
 		return ret;
 
@@ -1059,17 +1059,23 @@ static int ads1015_runtime_suspend(struct device *dev)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
 	struct ads1015_data *data = iio_priv(indio_dev);
+	struct regmap *map = data->regmap;
 
-	return ads1015_set_conv_mode(data, ADS1015_SINGLESHOT);
+	return regmap_update_bits(map, ADS1015_CFG_REG,
+				  ADS1015_CFG_MOD_MASK,
+				  ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT);
 }
 
 static int ads1015_runtime_resume(struct device *dev)
 {
 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
 	struct ads1015_data *data = iio_priv(indio_dev);
+	struct regmap *map = data->regmap;
 	int ret;
 
-	ret = ads1015_set_conv_mode(data, ADS1015_CONTINUOUS);
+	ret = regmap_update_bits(map, ADS1015_CFG_REG,
+				 ADS1015_CFG_MOD_MASK,
+				 ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT);
 	if (!ret)
 		data->conv_invalid = true;
 
Signature · 1 line
2.39.5
#15 lore raw

Re: [PATCH v5 09/10] iio: adc: ti-ads1015: inline ads1015_set_conv_mode()

Quoted 10 lines · Archit Anant

The ads1015_set_conv_mode() helper function is a single-line wrapper around regmap_update_bits().

Since the function is simple and only called during initialization and power management state transitions, the wrapper is unnecessary. Remove it and inline the regmap_update_bits() logic directly at the call sites to improve code readability and traceabilty.

Where applicable, introduce a local 'map' pointer to keep the inlined function calls concise.

...

drivers/iio/adc/ti-ads1015.c static int ads1015_disable_event_config(struct ads1015_data *data, · line 763

Quoted 5 lines
drivers/iio/adc/ti-ads1015.c +1 -1
-	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
+	ret = regmap_update_bits(map, ADS1015_CFG_REG,
 				ADS1015_CFG_COMP_QUE_MASK,
 				ADS1015_CFG_COMP_DISABLE <<
 					ADS1015_CFG_COMP_QUE_SHIFT);

The indentation is broken even in the original code.

drivers/iio/adc/ti-ads1015.c static void ads1015_get_channels_config(struct i2c_client *client) · line 936

Quoted 13 lines

static void ads1015_power_down(void *p)
{

drivers/iio/adc/ti-ads1015.c +4 -1
 	struct ads1015_data *data = p;
+	struct regmap *map = data->regmap;
 	int ret;
 
-	ret = ads1015_set_conv_mode(data, ADS1015_SINGLESHOT);
+	ret = regmap_update_bits(map, ADS1015_CFG_REG,
+				 ADS1015_CFG_MOD_MASK,
+				 ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT);
 
 	if (ret)
 		dev_warn(regmap_get_device(data->regmap),

At some point (may be even in this patch) it makes sense to switch to use 'map' in all applicable cases.

Quoted 1 line

"Failed to power down (%pe)\n", ERR_PTR(ret));

...

drivers/iio/adc/ti-ads1015.c static int ads1015_probe(struct i2c_client *client) · line 1037

Quoted 5 lines

static int ads1015_probe(struct i2c_client *client)

drivers/iio/adc/ti-ads1015.c +1 -1
-	ret = ads1015_set_conv_mode(data, ADS1015_CONTINUOUS);
+	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,

Can you also use 'map' here?

Quoted 4 lines
drivers/iio/adc/ti-ads1015.c +2 -0
+				 ADS1015_CFG_MOD_MASK,
+				 ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT);
 	if (ret)
 		return ret;

...

Review

Quoted 2 lines
(quoted diff) +2 -0
+	ret = regmap_update_bits(map, ADS1015_CFG_REG,
+				 ADS1015_CFG_MOD_MASK,

This is now perfectly a single line, same for the cases above.

Quoted 3 lines
drivers/iio/adc/ti-ads1015.c +1 -0
+				 ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT);
 	if (!ret)
 		data->conv_invalid = true;
Signature · 2 lines
With Best Regards,
Andy Shevchenko
#16 lore raw

PATCH v5 10/10 iio: adc: ti-ads1015: replace custom shift macros with FIELD_PREP/GET

In reply to Archit Anant

The driver currently uses custom _SHIFT macros and manual bitwise operations to read and write to the configuration register.

Modernize the bitwise logic by replacing all manual shifts with the standard FIELD_PREP() and FIELD_GET() macros from <linux/bitfield.h>. This improves readability and prevents potential bitwise errors.

Remove the now-unused _SHIFT macros from the top of the file.

---
 drivers/iio/adc/ti-ads1015.c | 68 ++++++++++++++++--------------------
 1 file changed, 30 insertions(+), 38 deletions(-)
drivers/iio/adc/ti-ads1015.c +30 -38
index 2e8f89d16586..cf94e9e6a6d2 100644
@@ -11,6 +11,7 @@
  *	* 0x4B - ADDR connected to SCL
  */
 
+#include <linux/bitfield.h>
 #include <linux/cleanup.h>
 #include <linux/delay.h>
 #include <linux/i2c.h>
@@ -39,15 +40,6 @@
 #define ADS1015_LO_THRESH_REG	0x02
 #define ADS1015_HI_THRESH_REG	0x03
 
-#define ADS1015_CFG_COMP_QUE_SHIFT	0
-#define ADS1015_CFG_COMP_LAT_SHIFT	2
-#define ADS1015_CFG_COMP_POL_SHIFT	3
-#define ADS1015_CFG_COMP_MODE_SHIFT	4
-#define ADS1015_CFG_DR_SHIFT	5
-#define ADS1015_CFG_MOD_SHIFT	8
-#define ADS1015_CFG_PGA_SHIFT	9
-#define ADS1015_CFG_MUX_SHIFT	12
-
 #define ADS1015_CFG_COMP_QUE_MASK	GENMASK(1, 0)
 #define ADS1015_CFG_COMP_LAT_MASK	BIT(2)
 #define ADS1015_CFG_COMP_POL_MASK	BIT(3)
@@ -408,15 +400,16 @@ int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)
 	dr = data->channel_data[chan].data_rate;
 	mask = ADS1015_CFG_MUX_MASK | ADS1015_CFG_PGA_MASK |
 		ADS1015_CFG_DR_MASK;
-	cfg = chan << ADS1015_CFG_MUX_SHIFT | pga << ADS1015_CFG_PGA_SHIFT |
-		dr << ADS1015_CFG_DR_SHIFT;
+	cfg = FIELD_PREP(ADS1015_CFG_MUX_MASK, chan) |
+	      FIELD_PREP(ADS1015_CFG_PGA_MASK, pga) |
+	      FIELD_PREP(ADS1015_CFG_DR_MASK, dr);
 
 	if (ads1015_event_channel_enabled(data)) {
 		mask |= ADS1015_CFG_COMP_QUE_MASK | ADS1015_CFG_COMP_MODE_MASK;
-		cfg |= data->thresh_data[chan].comp_queue <<
-				ADS1015_CFG_COMP_QUE_SHIFT |
-			data->comp_mode <<
-				ADS1015_CFG_COMP_MODE_SHIFT;
+		cfg |= FIELD_PREP(ADS1015_CFG_COMP_QUE_MASK,
+				  data->thresh_data[chan].comp_queue) |
+		       FIELD_PREP(ADS1015_CFG_COMP_MODE_MASK,
+				  data->comp_mode);
 	}
 
 	cfg = (old & ~mask) | (cfg & mask);
@@ -427,7 +420,7 @@ int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)
 		data->conv_invalid = true;
 	}
 	if (data->conv_invalid) {
-		dr_old = (old & ADS1015_CFG_DR_MASK) >> ADS1015_CFG_DR_SHIFT;
+		dr_old = FIELD_GET(ADS1015_CFG_DR_MASK, old);
 		conv_time = DIV_ROUND_UP(USEC_PER_SEC, data_rate[dr_old]);
 		conv_time += DIV_ROUND_UP(USEC_PER_SEC, data_rate[dr]);
 		conv_time += conv_time / 10; /* 10% internal clock inaccuracy */
@@ -745,6 +738,7 @@ static int ads1015_disable_event_config(struct ads1015_data *data,
 	const struct iio_chan_spec *chan, int comp_mode)
 {
 	struct regmap *map = data->regmap;
+	unsigned int val;
 	int ret;
 
 	if (!ads1015_event_channel_enabled(data))
@@ -757,10 +751,8 @@ static int ads1015_disable_event_config(struct ads1015_data *data,
 			comp_mode == ADS1015_CFG_COMP_MODE_WINDOW)
 		return 0;
 
-	ret = regmap_update_bits(map, ADS1015_CFG_REG,
-				ADS1015_CFG_COMP_QUE_MASK,
-				ADS1015_CFG_COMP_DISABLE <<
-					ADS1015_CFG_COMP_QUE_SHIFT);
+	val = FIELD_PREP(ADS1015_CFG_COMP_QUE_MASK, ADS1015_CFG_COMP_DISABLE);
+	ret = regmap_update_bits(map, ADS1015_CFG_REG, ADS1015_CFG_COMP_QUE_MASK, val);
 	if (ret)
 		return ret;
 
@@ -926,11 +918,11 @@ static void ads1015_power_down(void *p)
 {
 	struct ads1015_data *data = p;
 	struct regmap *map = data->regmap;
+	unsigned int val;
 	int ret;
 
-	ret = regmap_update_bits(map, ADS1015_CFG_REG,
-				 ADS1015_CFG_MOD_MASK,
-				 ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT);
+	val = FIELD_PREP(ADS1015_CFG_MOD_MASK, ADS1015_SINGLESHOT);
+	ret = regmap_update_bits(map, ADS1015_CFG_REG, ADS1015_CFG_MOD_MASK, val);
 
 	if (ret)
 		dev_warn(regmap_get_device(data->regmap),
@@ -943,6 +935,7 @@ static int ads1015_probe(struct i2c_client *client)
 	struct device *dev = &client->dev;
 	struct iio_dev *indio_dev;
 	struct ads1015_data *data;
+	unsigned int cfg_mode;
 	int ret;
 	int i;
 
@@ -1003,19 +996,19 @@ static int ads1015_probe(struct i2c_client *client)
 		unsigned int cfg_comp_mask = ADS1015_CFG_COMP_QUE_MASK |
 			ADS1015_CFG_COMP_LAT_MASK | ADS1015_CFG_COMP_POL_MASK;
 		unsigned int cfg_comp =
-			ADS1015_CFG_COMP_DISABLE << ADS1015_CFG_COMP_QUE_SHIFT |
-			1 << ADS1015_CFG_COMP_LAT_SHIFT;
+			FIELD_PREP(ADS1015_CFG_COMP_QUE_MASK, ADS1015_CFG_COMP_DISABLE) |
+			FIELD_PREP(ADS1015_CFG_COMP_LAT_MASK, 1);
 
 		switch (irq_trig) {
 		case IRQF_TRIGGER_FALLING:
 		case IRQF_TRIGGER_LOW:
-			cfg_comp |= ADS1015_CFG_COMP_POL_LOW <<
-					ADS1015_CFG_COMP_POL_SHIFT;
+			cfg_comp |= FIELD_PREP(ADS1015_CFG_COMP_POL_MASK,
+					       ADS1015_CFG_COMP_POL_LOW);
 			break;
 		case IRQF_TRIGGER_HIGH:
 		case IRQF_TRIGGER_RISING:
-			cfg_comp |= ADS1015_CFG_COMP_POL_HIGH <<
-					ADS1015_CFG_COMP_POL_SHIFT;
+			cfg_comp |= FIELD_PREP(ADS1015_CFG_COMP_POL_MASK,
+					       ADS1015_CFG_COMP_POL_HIGH);
 			break;
 		default:
 			return -EINVAL;
@@ -1034,9 +1027,8 @@ static int ads1015_probe(struct i2c_client *client)
 			return ret;
 	}
 
-	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG,
-				 ADS1015_CFG_MOD_MASK,
-				 ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT);
+	cfg_mode = FIELD_PREP(ADS1015_CFG_MOD_MASK, ADS1015_CONTINUOUS);
+	ret = regmap_update_bits(data->regmap, ADS1015_CFG_REG, ADS1015_CFG_MOD_MASK, cfg_mode);
 	if (ret)
 		return ret;
 
@@ -1060,10 +1052,10 @@ static int ads1015_runtime_suspend(struct device *dev)
 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
 	struct ads1015_data *data = iio_priv(indio_dev);
 	struct regmap *map = data->regmap;
+	unsigned int val;
 
-	return regmap_update_bits(map, ADS1015_CFG_REG,
-				  ADS1015_CFG_MOD_MASK,
-				  ADS1015_SINGLESHOT << ADS1015_CFG_MOD_SHIFT);
+	val = FIELD_PREP(ADS1015_CFG_MOD_MASK, ADS1015_SINGLESHOT);
+	return regmap_update_bits(map, ADS1015_CFG_REG, ADS1015_CFG_MOD_MASK, val);
 }
 
 static int ads1015_runtime_resume(struct device *dev)
@@ -1071,11 +1063,11 @@ static int ads1015_runtime_resume(struct device *dev)
 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
 	struct ads1015_data *data = iio_priv(indio_dev);
 	struct regmap *map = data->regmap;
+	unsigned int val;
 	int ret;
 
-	ret = regmap_update_bits(map, ADS1015_CFG_REG,
-				 ADS1015_CFG_MOD_MASK,
-				 ADS1015_CONTINUOUS << ADS1015_CFG_MOD_SHIFT);
+	val = FIELD_PREP(ADS1015_CFG_MOD_MASK, ADS1015_CONTINUOUS);
+	ret = regmap_update_bits(map, ADS1015_CFG_REG, ADS1015_CFG_MOD_MASK, val);
 	if (!ret)
 		data->conv_invalid = true;
 
Signature · 1 line
2.39.5
#17 lore raw

Re: [PATCH v5 10/10] iio: adc: ti-ads1015: replace custom shift macros with FIELD_PREP/GET

Quoted 8 lines · Archit Anant

The driver currently uses custom _SHIFT macros and manual bitwise operations to read and write to the configuration register.

Modernize the bitwise logic by replacing all manual shifts with the standard FIELD_PREP() and FIELD_GET() macros from <linux/bitfield.h>. This improves readability and prevents potential bitwise errors.

Remove the now-unused _SHIFT macros from the top of the file.

...

Quoted 13 lines

int ads1015_get_adc_result(struct ads1015_data *data, int chan, int *val)

(quoted diff) +3 -2
 	dr = data->channel_data[chan].data_rate;
 	mask = ADS1015_CFG_MUX_MASK | ADS1015_CFG_PGA_MASK |
 		ADS1015_CFG_DR_MASK;
-	cfg = chan << ADS1015_CFG_MUX_SHIFT | pga << ADS1015_CFG_PGA_SHIFT |
-		dr << ADS1015_CFG_DR_SHIFT;
+	cfg = FIELD_PREP(ADS1015_CFG_MUX_MASK, chan) |
 
+	      FIELD_PREP(ADS1015_CFG_PGA_MASK, pga) |
+	      FIELD_PREP(ADS1015_CFG_DR_MASK, dr);
 
 	if (ads1015_event_channel_enabled(data)) {

Review

Quoted 10 lines
(quoted diff) +4 -4
 		mask |= ADS1015_CFG_COMP_QUE_MASK | ADS1015_CFG_COMP_MODE_MASK;
-		cfg |= data->thresh_data[chan].comp_queue <<
-				ADS1015_CFG_COMP_QUE_SHIFT |
-			data->comp_mode <<
-				ADS1015_CFG_COMP_MODE_SHIFT;
+		cfg |= FIELD_PREP(ADS1015_CFG_COMP_QUE_MASK,
+				  data->thresh_data[chan].comp_queue) |
+		       FIELD_PREP(ADS1015_CFG_COMP_MODE_MASK,
+				  data->comp_mode);
 	}

Personally I would go with if-else with full initialisations of mask and cfg.

	if (ads1015_event_channel_enabled(data)) {
		mask = ADS1015_CFG_COMP_QUE_MASK | ADS1015_CFG_COMP_MODE_MASK |
		       ADS1015_CFG_MUX_MASK | ADS1015_CFG_PGA_MASK |
		       ADS1015_CFG_DR_MASK;
		cfg = FIELD_PREP(ADS1015_CFG_MUX_MASK, chan) |
		      FIELD_PREP(ADS1015_CFG_PGA_MASK, pga) |
		      FIELD_PREP(ADS1015_CFG_DR_MASK, dr) |
		      FIELD_PREP(ADS1015_CFG_COMP_QUE_MASK,
				  data->thresh_data[chan].comp_queue) |
		      FIELD_PREP(ADS1015_CFG_COMP_MODE_MASK,
				  data->comp_mode);
	} else {
		mask = ADS1015_CFG_MUX_MASK | ADS1015_CFG_PGA_MASK |
		       ADS1015_CFG_DR_MASK;
		cfg = FIELD_PREP(ADS1015_CFG_MUX_MASK, chan) |
		      FIELD_PREP(ADS1015_CFG_PGA_MASK, pga) |
		      FIELD_PREP(ADS1015_CFG_DR_MASK, dr);
	}

// also note the broken indentation

Signature · 2 lines
With Best Regards,
Andy Shevchenko
Reviewed-by on the v5 series
#18 lore raw
In reply to Archit Anant
Quoted 43 lines · On Wed, 30 Sep 2026 22:41:54 +0530 Archit Anant <[email protected]> wrote:

This series modernizes the ti-ads1015 driver by updating its runtime PM handling, error handling, resource management, and register bitfield operations.

This series builds on top of Stepan Ionichev's devm error path fix [1] and:
- Replaces SET_RUNTIME_PM_OPS() with DEFINE_RUNTIME_DEV_PM_OPS().
- Sorts the driver headers alphabetically.
- Returns -ENODATA when match data is missing.
- Uses a local device pointer in probe.
- Converts suitable error paths to dev_err_probe().
- Drops unneeded '< 0' error checks for functions returning 0 or error.
- Converts mutex initialization to devm_mutex_init().
- Transitions runtime PM setup to devm_pm_runtime_set_active_enabled().
- Inlines the redundant ads1015_set_conv_mode() helper.
- Replaces custom shift macros with FIELD_PREP()/FIELD_GET().

[1] https://lore.kernel.org/all/[email protected]/

---
v5:
- Reordered patches: inlined ads1015_set_conv_mode() before applying FIELD_PREP() to completely eliminate code churn.
- Extracted FIELD_PREP() evaluations into local variables for regmap_update_bits() calls to ensure clean line lengths and readability.
- Added a patch to return -ENODATA when i2c_get_match_data() fails, as requested by Andy Shevchenko.
- Split devm_mutex_init() into its own patch to decouple it from the runtime PM modernization, as requested by Andy Shevchenko.

v4: https://lore.kernel.org/linux-iio/[email protected]/

Archit Anant (10):
iio: adc: ti-ads1015: use DEFINE_RUNTIME_DEV_PM_OPS()
iio: adc: ti-ads1015: sort headers alphabetically
iio: adc: ti-ads1015: return -ENODATA when match data is missing
iio: adc: ti-ads1015: use local device pointer in probe
iio: adc: ti-ads1015: use dev_err_probe() for error handling
iio: adc: ti-ads1015: drop unneeded < 0 error checks
iio: adc: ti-ads1015: use devm_mutex_init()
iio: adc: ti-ads1015: use managed runtime PM setup
iio: adc: ti-ads1015: inline ads1015_set_conv_mode()
iio: adc: ti-ads1015: replace custom shift macros with FIELD_PREP/GET

Quoted 3 lines
 drivers/iio/adc/ti-ads1015.c | 160 +++++++++++++++++------------------
 1 file changed, 76 insertions(+), 84 deletions(-)

I have two *very* tiny nits that can be tweaked when applying. Otherwise LGTM.

Signature · 2 lines
Kind regards,
Joshua Crofts