Add minimal boot support for IPQ6018
Subsystems (8)
v3 cover Add minimal boot support for IPQ6018
The IPQ6018 is Qualcomm\u2019s 802.11ax SoC for Routers, Gateways and Access Points.
This series adds minimal board boot support for ipq6018-cp01 board.
[V3]
* Removed clock driver and bindings from this patch series, and added them as a different series.
* Removed qpic_padN from pinctrl driver.
* Addressed review comments in dts, and added the remaining fixed clocks their
* Fixed review comments in pinctrl bindings
* Patch 4 arm64: dts: Add ipq6018 SoC and CP01 board support has build dependency with,
https://patchwork.ozlabs.org/patch/1217293/
[v2]
* Splitted dt bindings and driver into different patches. Added missing bindings and some style changes.
* Added ipq6018 schema
* Addressed review comments for gcc clock bindings.
* Removed all clk critical flags, removed 1/1 factor clocks, moved to new way of specifying clk parents, and addressed other review comments.
* Sorted nodes based on address, name, label. Removed unused clock nodes, Addressed other review comments.
Sricharan R (5):
dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
pinctrl: qcom: Add ipq6018 pinctrl driver
dt-bindings: qcom: Add ipq6018 bindings
arm64: dts: Add ipq6018 SoC and CP01 board support
arm64: defconfig: Enable qcom ipq6018 clock and pinctrl
Documentation/devicetree/bindings/arm/qcom.yaml | 8 + .../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 174 +++ arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 30 + arch/arm64/boot/dts/qcom/ipq6018.dtsi | 263 +++++ arch/arm64/configs/defconfig | 3 + drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq6018.c | 1107 ++++++++++++++++++++ 9 files changed, 1597 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c
Signature · 1 line
1.9.1
PATCH v3 1/5 dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
Add device tree binding Documentation details for ipq6018 pinctrl driver.
---
[v3] Fixed the example dt node, inherited properties
.../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 166 +++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +166 -0
@@ -0,0 +1,166 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ6018 TLMM block + +maintainers: + - Sricharan R <[email protected]> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ6018 platform. + +properties: + compatible: + const: qcom,ipq6018-pinctrl + reg: + maxItems: 1 + interrupts: + Description: Specifies the TLMM summary IRQ + maxItems: 1 + interrupt-controller: true + '#interrupt-cells': + Description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + gpio-controller: true + '#gpio-cells': + Description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + gpio-ranges: + Description: Documentation/devicetree/bindings/gpio/gpio.txt + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + Description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + Properties: + pins: + allOf: + $ref: /schemas/types.yaml#/definitions/string + enum: + gpio0-gpio80 + sdc1_clk + sdc1_cmd + sdc1_data + sdc2_clk + sdc2_cmd + sdc2_data + qdsd_cmd + qdsd_data0 + qdsd_data1 + qdsd_data2 + qdsd_data3 + Description: + List of gpio pins affected by the properties specified in this + subnode. + + function: + allOf: + $ref: /schemas/types.yaml#/definitions/string + enum: + adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp_i2c1, + blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_spi1, + blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, + blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, + blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5, + blsp_spi6, blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam1_rst, + cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, + dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, + flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, + gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, + ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, + pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1, + qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, + sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, + uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst + Description: + Specify the alternative function to be configured for the specified + pins. + bias-disable: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins should be configured as no pull. + bias-pull-down: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins should be configured as pull down. + bias-pull-up: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins should be configured as pull up. + output-high: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins are configured in output mode, driven high. + This option is not available for sdc pins. + output-low: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins are configured in output mode, driven low. + This option is not available for sdc pins. + drive-strength: + allOf: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4, 6, 8, 10, 12, 14, 16] + Description: + Selects the drive strength for the specified pins, in mA. + + required: + - pins + - function + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +example: + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_3_pins: serial3-pinmux { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + };
Signature · 1 line
1.9.1
Rob Herring
maintainerRe: [PATCH V3 1/5] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
Quoted 31 lines · Sricharan R
Add device tree binding Documentation details for ipq6018 pinctrl driver.
Co-developed-by Rajkumar Ayyasamy <[email protected]>Signed-off-by Rajkumar Ayyasamy <[email protected]>Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sricharan R <[email protected]>---
[v3] Fixed the example dt node, inherited properties.../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 166 +++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yamlDocumentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +8
-0@@ -0,0 +1,166 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ6018 TLMM block +
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml line 18
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +10
-0+maintainers: + - Sricharan R <[email protected]> + +description: | + This binding describes the Top Level Mode Multiplexer block found in the + IPQ6018 platform. + +properties: + compatible: + const: qcom,ipq6018-pinctrl
A blank line after each property schema is preferred.
Quoted 19 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +19
-0+ reg: + maxItems: 1 + interrupts: + Description: Specifies the TLMM summary IRQ + maxItems: 1 + interrupt-controller: true + '#interrupt-cells': + Description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + gpio-controller: true + '#gpio-cells': + Description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + gpio-ranges: + Description: Documentation/devicetree/bindings/gpio/gpio.txt + maxItems: 1
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml line 47
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +10
-0+ +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + Description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + Properties:
Did you run 'make dt_binding_check' and is dt-schema up to date? This isn't valid json-schema which is case sensitive.
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml line 50
Quoted 3 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +3
-0+ pins: + allOf: + $ref: /schemas/types.yaml#/definitions/string
Also not valid as allOf is a list.
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml line 52
Quoted 2 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +2
-0+ enum: + gpio0-gpio80
As is 'enum'...
Quoted 41 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +41
-0+ sdc1_clk + sdc1_cmd + sdc1_data + sdc2_clk + sdc2_cmd + sdc2_data + qdsd_cmd + qdsd_data0 + qdsd_data1 + qdsd_data2 + qdsd_data3 + Description: + List of gpio pins affected by the properties specified in this + subnode. + + function: + allOf: + $ref: /schemas/types.yaml#/definitions/string + enum: + adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp_i2c1, + blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_spi1, + blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, + blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, + blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5, + blsp_spi6, blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam1_rst, + cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, + dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, + flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, + gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, + ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, + pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml line 103
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +10
-0+ qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, + sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, + uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst + Description: + Specify the alternative function to be configured for the specified + pins. + bias-disable: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml
While you should have this reference, it is at the wrong level. The node needs to reference this schema, not the properties.
Quoted 66 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +63
-0+ Description: + The specified pins should be configured as no pull. + bias-pull-down: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins should be configured as pull down. + bias-pull-up: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins should be configured as pull up. + output-high: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins are configured in output mode, driven high. + This option is not available for sdc pins. + output-low: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins are configured in output mode, driven low. + This option is not available for sdc pins. + drive-strength: + allOf: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4, 6, 8, 10, 12, 14, 16] + Description: + Selects the drive strength for the specified pins, in mA. + + required: + - pins + - function + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +example: + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_3_pins: serial3-pinmux { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + };Signature · 1 line
1.9.1
Re: [PATCH V3 1/5] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
Hi Rob,
Thanks for the review.
Quoted 36 lines · Rob Herring
Quoted 35 lines · Sricharan R
Add device tree binding Documentation details for ipq6018 pinctrl driver.
Co-developed-by Rajkumar Ayyasamy <[email protected]>Signed-off-by Rajkumar Ayyasamy <[email protected]>Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sricharan R <[email protected]>---
[v3] Fixed the example dt node, inherited properties.../bindings/pinctrl/qcom,ipq6018-pinctrl.yaml | 166 +++++++++++++++++++++ 1 file changed, 166 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yamlDocumentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +12
-0@@ -0,0 +1,166 @@ +# SPDX-License-Identifier: GPL-2.0-or-later +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,ipq6018-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. IPQ6018 TLMM block + +maintainers: + - Sricharan R <[email protected]> + +description: |
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml line 18
Quoted 6 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +6
-0+ This binding describes the Top Level Mode Multiplexer block found in the + IPQ6018 platform. + +properties: + compatible: + const: qcom,ipq6018-pinctrlA blank line after each property schema is preferred.
ok.
Quoted 25 lines
Quoted 25 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +24
-0+ reg: + maxItems: 1 + interrupts: + Description: Specifies the TLMM summary IRQ + maxItems: 1 + interrupt-controller: true + '#interrupt-cells': + Description: + Specifies the PIN numbers and Flags, as defined in defined in + include/dt-bindings/interrupt-controller/irq.h + const: 2 + gpio-controller: true + '#gpio-cells': + Description: Specifying the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + gpio-ranges: + Description: Documentation/devicetree/bindings/gpio/gpio.txt + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object
Quoted 8 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml line 47
Quoted 5 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +5
-0+ Description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + Properties:Did you run 'make
dt_binding_check' and is dt-schema up to date? This isn't valid json-schema which is case sensitive.
ok, will run the checks and will fix it.
Quoted 7 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml line 50
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +3
-0+ pins: + allOf: + $ref: /schemas/types.yaml#/definitions/stringAlso not valid as allOf is a list.
ok, will fix
Quoted 4 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml line 52
Quoted 2 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +2
-0+ enum: + gpio0-gpio80As is 'enum'...
ok.
Quoted 53 lines
Quoted 42 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +41
-0+ sdc1_clk + sdc1_cmd + sdc1_data + sdc2_clk + sdc2_cmd + sdc2_data + qdsd_cmd + qdsd_data0 + qdsd_data1 + qdsd_data2 + qdsd_data3 + Description: + List of gpio pins affected by the properties specified in this + subnode. + + function: + allOf: + $ref: /schemas/types.yaml#/definitions/string + enum: + adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, atest_char, + atest_char0, atest_char1, atest_char2, atest_char3, atest_combodac, + atest_gpsadc0, atest_gpsadc1, atest_tsens, atest_wlan0, + atest_wlan1, backlight_en, bimc_dte0, bimc_dte1, blsp_i2c1, + blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_spi1, + blsp_spi1_cs1, blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, + blsp_spi2_cs1, blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, + blsp_spi3_cs1, blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5, + blsp_spi6, blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam1_rst, + cam1_standby, cam_mclk0, cam_mclk1, cci_async, cci_i2c, cci_timer0, + cci_timer1, cci_timer2, cdc_pdm0, codec_mad, dbg_out, display_5v, + dmic0_clk, dmic0_data, dsi_rst, ebi0_wrcdc, euro_us, ext_lpass, + flash_strobe, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, + gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gpio, gsm0_tx0, + gsm0_tx1, gsm1_tx0, gsm1_tx1, gyro_accl, kpsns0, kpsns1, kpsns2, + ldo_en, ldo_update, mag_int, mdp_vsync, modem_tsync, m_voc, + nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, + pri_mi2s_ws, prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_ctitrig_in_a0, qdss_ctitrig_in_a1, + qdss_ctitrig_in_b0, qdss_ctitrig_in_b1, qdss_ctitrig_out_a0, + qdss_ctitrig_out_a1, qdss_ctitrig_out_b0, qdss_ctitrig_out_b1,Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml line 103
Quoted 10 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +10
-0+ qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, reset_n, sd_card, sd_write, + sec_mi2s, smb_int, ssbi_wtr0, ssbi_wtr1, uim1, uim2, uim3, + uim_batt, wcss_bt, wcss_fm, wcss_wlan, webcam1_rst + Description: + Specify the alternative function to be configured for the specified + pins. + bias-disable: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml
Quoted 3 lines
While you should have this reference, it is at the wrong level. The node needs to reference this schema, not the properties.
ok, will fix here and below properties as well.
Regards,
Sricharan
Quoted 66 lines
Quoted 66 lines
Documentation/devicetree/bindings/pinctrl/qcom,ipq6018-pinctrl.yaml new file +63
-0+ Description: + The specified pins should be configured as no pull. + bias-pull-down: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins should be configured as pull down. + bias-pull-up: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins should be configured as pull up. + output-high: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins are configured in output mode, driven high. + This option is not available for sdc pins. + output-low: + allOf: + $ref: /schemas/pinctrl/pincfg-node.yaml + Description: + The specified pins are configured in output mode, driven low. + This option is not available for sdc pins. + drive-strength: + allOf: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 4, 6, 8, 10, 12, 14, 16] + Description: + Selects the drive strength for the specified pins, in mA. + + required: + - pins + - function + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +example: + tlmm: pinctrl@1000000 { + compatible = "qcom,ipq6018-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&tlmm 0 80>; + interrupt-controller; + #interrupt-cells = <2>; + + serial_3_pins: serial3-pinmux { + pins = "gpio44", "gpio45"; + function = "blsp2_uart"; + drive-strength = <8>; + bias-pull-down; + }; + };Signature · 1 line
1.9.1
Signature · 1 line
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Re: [PATCH V3 1/5] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
In reply to Sricharan RQuoted 10 lines · Sricharan R
Add device tree binding Documentation details for ipq6018 pinctrl driver.
Co-developed-by Rajkumar Ayyasamy <[email protected]>Signed-off-by Rajkumar Ayyasamy <[email protected]>Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sricharan R <[email protected]>
Quoted 2 lines
---
[v3] Fixed the example dt node, inherited properties
Once you are done with patches 1 & 2, can I merge these separately to the pinctrl tree?
Yours,
Linus Walleij
Re: [PATCH V3 1/5] dt-bindings: pinctrl: qcom: Add ipq6018 pinctrl bindings
Hi Linus,
Quoted 15 lines · Linus Walleij
Quoted 10 lines · Sricharan R
Add device tree binding Documentation details for ipq6018 pinctrl driver.
Co-developed-by Rajkumar Ayyasamy <[email protected]>Signed-off-by Rajkumar Ayyasamy <[email protected]>Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sricharan R <[email protected]>Quoted 2 lines
---
[v3] Fixed the example dt node, inherited properties
Quoted 2 lines
Once you are done with patches 1 & 2, can I merge these separately to the pinctrl tree?
Yeah, that should be fine. Posted a V4 and waiting for approval from Rob on the pinctrl bindings for Patch 1.
Regards,
Sricharan
Signature · 1 line
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
PATCH v3 2/5 pinctrl: qcom: Add ipq6018 pinctrl driver
In reply to Sricharan RAdd initial pinctrl driver to support pin configuration with pinctrl framework for ipq6018.
---
[v3] Removed qpic_padN
drivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq6018.c | 1107 ++++++++++++++++++++++++++++++++ 3 files changed, 1118 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.c
drivers/pinctrl/qcom/Kconfig +10 -0
@@ -50,6 +50,16 @@ config PINCTRL_IPQ8074 Qualcomm Technologies Inc. IPQ8074 platform. Select this for IPQ8074. +config PINCTRL_IPQ6018 + tristate "Qualcomm Technologies, Inc. IPQ6018 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for + the Qualcomm Technologies Inc. TLMM block found on the + Qualcomm Technologies Inc. IPQ6018 platform. Select this for + IPQ6018. + config PINCTRL_MSM8660 tristate "Qualcomm 8660 pin controller driver" depends on GPIOLIB && OF
drivers/pinctrl/qcom/Makefile +1 -0
@@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o +obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.o
drivers/pinctrl/qcom/pinctrl-ipq6018.c new file +1107 -0
1,107 lines not on this page · raw message
Signature · 1 line
1.9.1
Re: [PATCH V3 2/5] pinctrl: qcom: Add ipq6018 pinctrl driver
Quoted 3 lines · Sricharan R
Add initial pinctrl driver to support pin configuration with pinctrl framework for ipq6018.
Quoted 1,164 lines
Co-developed-by Rajkumar Ayyasamy <[email protected]>Signed-off-by Rajkumar Ayyasamy <[email protected]>Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sricharan R <[email protected]>---
[v3] Removedqpic_padNdrivers/pinctrl/qcom/Kconfig | 10 + drivers/pinctrl/qcom/Makefile | 1 + drivers/pinctrl/qcom/pinctrl-ipq6018.c | 1107 ++++++++++++++++++++++++++++++++ 3 files changed, 1118 insertions(+) create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq6018.cdrivers/pinctrl/qcom/Kconfig +10
-0@@ -50,6 +50,16 @@ config PINCTRL_IPQ8074 Qualcomm Technologies Inc. IPQ8074 platform. Select this for IPQ8074. +config PINCTRL_IPQ6018 + tristate "Qualcomm Technologies, Inc. IPQ6018 pin controller driver" + depends on GPIOLIB && OF + select PINCTRL_MSM + help + This is the pinctrl, pinmux, pinconf and gpiolib driver for + the Qualcomm Technologies Inc. TLMM block found on the + Qualcomm Technologies Inc. IPQ6018 platform. Select this for + IPQ6018. + config PINCTRL_MSM8660 tristate "Qualcomm 8660 pin controller driver" depends on GPIOLIB && OFdrivers/pinctrl/qcom/Makefile +1
-0@@ -6,6 +6,7 @@ obj-$(CONFIG_PINCTRL_APQ8084) += pinctrl-apq8084.o obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o +obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.odrivers/pinctrl/qcom/pinctrl-ipq6018.c new file +1107
-0@@ -0,0 +1,1107 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. +*/ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> + +#include "pinctrl-msm.h" + +#define FUNCTION (fname) \ + [msm_mux_##fname] = { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +#define REG_SIZE 0x1000 +#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \ + { \ + .name = "gpio" #id, \ + .pins = gpio##id##_pins, \ + .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \ + .funcs = (int[]){ \ + msm_mux_gpio, /* gpio mode */ \ + msm_mux_##f1, \ + msm_mux_##f2, \ + msm_mux_##f3, \ + msm_mux_##f4, \ + msm_mux_##f5, \ + msm_mux_##f6, \ + msm_mux_##f7, \ + msm_mux_##f8, \ + msm_mux_##f9 \ + }, \ + .nfuncs = 10, \ + .ctl_reg = REG_SIZE * id, \ + .io_reg = 0x4 + REG_SIZE * id, \ + .intr_cfg_reg = 0x8 + REG_SIZE * id, \ + .intr_status_reg = 0xc + REG_SIZE * id, \ + .intr_target_reg = 0x8 + REG_SIZE * id, \ + .mux_bit = 2, \ + .pull_bit = 0, \ + .drv_bit = 6, \ + .oe_bit = 9, \ + .in_bit = 0, \ + .out_bit = 1, \ + .intr_enable_bit = 0, \ + .intr_status_bit = 0, \ + .intr_target_bit = 5, \ + .intr_target_kpss_val = 3, \ + .intr_raw_status_bit = 4, \ + .intr_polarity_bit = 1, \ + .intr_detection_bit = 2, \ + .intr_detection_width = 2, \ + } + +static const struct pinctrl_pin_desc ipq6018_pins[] = { +PINCTRL_PIN (0 ,"GPIO_0" ), +PINCTRL_PIN (1 ,"GPIO_1" ), +PINCTRL_PIN (2 ,"GPIO_2" ), +PINCTRL_PIN (3 ,"GPIO_3" ), +PINCTRL_PIN (4 ,"GPIO_4" ), +PINCTRL_PIN (5 ,"GPIO_5" ), +PINCTRL_PIN (6 ,"GPIO_6" ), +PINCTRL_PIN (7 ,"GPIO_7" ), +PINCTRL_PIN (8 ,"GPIO_8" ), +PINCTRL_PIN (9 ,"GPIO_9" ), +PINCTRL_PIN (10 ,"GPIO_10" ), +PINCTRL_PIN (11 ,"GPIO_11" ), +PINCTRL_PIN (12 ,"GPIO_12" ), +PINCTRL_PIN (13 ,"GPIO_13" ), +PINCTRL_PIN (14 ,"GPIO_14" ), +PINCTRL_PIN (15 ,"GPIO_15" ), +PINCTRL_PIN (16 ,"GPIO_16" ), +PINCTRL_PIN (17 ,"GPIO_17" ), +PINCTRL_PIN (18 ,"GPIO_18" ), +PINCTRL_PIN (19 ,"GPIO_19" ), +PINCTRL_PIN (20 ,"GPIO_20" ), +PINCTRL_PIN (21 ,"GPIO_21" ), +PINCTRL_PIN (22 ,"GPIO_22" ), +PINCTRL_PIN (23 ,"GPIO_23" ), +PINCTRL_PIN (24 ,"GPIO_24" ), +PINCTRL_PIN (25 ,"GPIO_25" ), +PINCTRL_PIN (26 ,"GPIO_26" ), +PINCTRL_PIN (27 ,"GPIO_27" ), +PINCTRL_PIN (28 ,"GPIO_28" ), +PINCTRL_PIN (29 ,"GPIO_29" ), +PINCTRL_PIN (30 ,"GPIO_30" ), +PINCTRL_PIN (31 ,"GPIO_31" ), +PINCTRL_PIN (32 ,"GPIO_32" ), +PINCTRL_PIN (33 ,"GPIO_33" ), +PINCTRL_PIN (34 ,"GPIO_34" ), +PINCTRL_PIN (35 ,"GPIO_35" ), +PINCTRL_PIN (36 ,"GPIO_36" ), +PINCTRL_PIN (37 ,"GPIO_37" ), +PINCTRL_PIN (38 ,"GPIO_38" ), +PINCTRL_PIN (39 ,"GPIO_39" ), +PINCTRL_PIN (40 ,"GPIO_40" ), +PINCTRL_PIN (41 ,"GPIO_41" ), +PINCTRL_PIN (42 ,"GPIO_42" ), +PINCTRL_PIN (43 ,"GPIO_43" ), +PINCTRL_PIN (44 ,"GPIO_44" ), +PINCTRL_PIN (45 ,"GPIO_45" ), +PINCTRL_PIN (46 ,"GPIO_46" ), +PINCTRL_PIN (47 ,"GPIO_47" ), +PINCTRL_PIN (48 ,"GPIO_48" ), +PINCTRL_PIN (49 ,"GPIO_49" ), +PINCTRL_PIN (50 ,"GPIO_50" ), +PINCTRL_PIN (51 ,"GPIO_51" ), +PINCTRL_PIN (52 ,"GPIO_52" ), +PINCTRL_PIN (53 ,"GPIO_53" ), +PINCTRL_PIN (54 ,"GPIO_54" ), +PINCTRL_PIN (55 ,"GPIO_55" ), +PINCTRL_PIN (56 ,"GPIO_56" ), +PINCTRL_PIN (57 ,"GPIO_57" ), +PINCTRL_PIN (58 ,"GPIO_58" ), +PINCTRL_PIN (59 ,"GPIO_59" ), +PINCTRL_PIN (60 ,"GPIO_60" ), +PINCTRL_PIN (61 ,"GPIO_61" ), +PINCTRL_PIN (62 ,"GPIO_62" ), +PINCTRL_PIN (63 ,"GPIO_63" ), +PINCTRL_PIN (64 ,"GPIO_64" ), +PINCTRL_PIN (65 ,"GPIO_65" ), +PINCTRL_PIN (66 ,"GPIO_66" ), +PINCTRL_PIN (67 ,"GPIO_67" ), +PINCTRL_PIN (68 ,"GPIO_68" ), +PINCTRL_PIN (69 ,"GPIO_69" ), +PINCTRL_PIN (70 ,"GPIO_70" ), +PINCTRL_PIN (71 ,"GPIO_71" ), +PINCTRL_PIN (72 ,"GPIO_72" ), +PINCTRL_PIN (73 ,"GPIO_73" ), +PINCTRL_PIN (74 ,"GPIO_74" ), +PINCTRL_PIN (75 ,"GPIO_75" ), +PINCTRL_PIN (76 ,"GPIO_76" ), +PINCTRL_PIN (77 ,"GPIO_77" ), +PINCTRL_PIN (78 ,"GPIO_78" ), +PINCTRL_PIN (79 ,"GPIO_79" ), +}; + +#define DECLARE_MSM_GPIO_PINS (pin) \ + static const unsigned int gpio##pin##_pins[] = { pin } +DECLARE_MSM_GPIO_PINS (0 ); +DECLARE_MSM_GPIO_PINS (1 ); +DECLARE_MSM_GPIO_PINS (2 ); +DECLARE_MSM_GPIO_PINS (3 ); +DECLARE_MSM_GPIO_PINS (4 ); +DECLARE_MSM_GPIO_PINS (5 ); +DECLARE_MSM_GPIO_PINS (6 ); +DECLARE_MSM_GPIO_PINS (7 ); +DECLARE_MSM_GPIO_PINS (8 ); +DECLARE_MSM_GPIO_PINS (9 ); +DECLARE_MSM_GPIO_PINS (10 ); +DECLARE_MSM_GPIO_PINS (11 ); +DECLARE_MSM_GPIO_PINS (12 ); +DECLARE_MSM_GPIO_PINS (13 ); +DECLARE_MSM_GPIO_PINS (14 ); +DECLARE_MSM_GPIO_PINS (15 ); +DECLARE_MSM_GPIO_PINS (16 ); +DECLARE_MSM_GPIO_PINS (17 ); +DECLARE_MSM_GPIO_PINS (18 ); +DECLARE_MSM_GPIO_PINS (19 ); +DECLARE_MSM_GPIO_PINS (20 ); +DECLARE_MSM_GPIO_PINS (21 ); +DECLARE_MSM_GPIO_PINS (22 ); +DECLARE_MSM_GPIO_PINS (23 ); +DECLARE_MSM_GPIO_PINS (24 ); +DECLARE_MSM_GPIO_PINS (25 ); +DECLARE_MSM_GPIO_PINS (26 ); +DECLARE_MSM_GPIO_PINS (27 ); +DECLARE_MSM_GPIO_PINS (28 ); +DECLARE_MSM_GPIO_PINS (29 ); +DECLARE_MSM_GPIO_PINS (30 ); +DECLARE_MSM_GPIO_PINS (31 ); +DECLARE_MSM_GPIO_PINS (32 ); +DECLARE_MSM_GPIO_PINS (33 ); +DECLARE_MSM_GPIO_PINS (34 ); +DECLARE_MSM_GPIO_PINS (35 ); +DECLARE_MSM_GPIO_PINS (36 ); +DECLARE_MSM_GPIO_PINS (37 ); +DECLARE_MSM_GPIO_PINS (38 ); +DECLARE_MSM_GPIO_PINS (39 ); +DECLARE_MSM_GPIO_PINS (40 ); +DECLARE_MSM_GPIO_PINS (41 ); +DECLARE_MSM_GPIO_PINS (42 ); +DECLARE_MSM_GPIO_PINS (43 ); +DECLARE_MSM_GPIO_PINS (44 ); +DECLARE_MSM_GPIO_PINS (45 ); +DECLARE_MSM_GPIO_PINS (46 ); +DECLARE_MSM_GPIO_PINS (47 ); +DECLARE_MSM_GPIO_PINS (48 ); +DECLARE_MSM_GPIO_PINS (49 ); +DECLARE_MSM_GPIO_PINS (50 ); +DECLARE_MSM_GPIO_PINS (51 ); +DECLARE_MSM_GPIO_PINS (52 ); +DECLARE_MSM_GPIO_PINS (53 ); +DECLARE_MSM_GPIO_PINS (54 ); +DECLARE_MSM_GPIO_PINS (55 ); +DECLARE_MSM_GPIO_PINS (56 ); +DECLARE_MSM_GPIO_PINS (57 ); +DECLARE_MSM_GPIO_PINS (58 ); +DECLARE_MSM_GPIO_PINS (59 ); +DECLARE_MSM_GPIO_PINS (60 ); +DECLARE_MSM_GPIO_PINS (61 ); +DECLARE_MSM_GPIO_PINS (62 ); +DECLARE_MSM_GPIO_PINS (63 ); +DECLARE_MSM_GPIO_PINS (64 ); +DECLARE_MSM_GPIO_PINS (65 ); +DECLARE_MSM_GPIO_PINS (66 ); +DECLARE_MSM_GPIO_PINS (67 ); +DECLARE_MSM_GPIO_PINS (68 ); +DECLARE_MSM_GPIO_PINS (69 ); +DECLARE_MSM_GPIO_PINS (70 ); +DECLARE_MSM_GPIO_PINS (71 ); +DECLARE_MSM_GPIO_PINS (72 ); +DECLARE_MSM_GPIO_PINS (73 ); +DECLARE_MSM_GPIO_PINS (74 ); +DECLARE_MSM_GPIO_PINS (75 ); +DECLARE_MSM_GPIO_PINS (76 ); +DECLARE_MSM_GPIO_PINS (77 ); +DECLARE_MSM_GPIO_PINS (78 ); +DECLARE_MSM_GPIO_PINS (79 ); + +enum ipq6018_functions { + msm_mux_atest_char, + msm_mux_atest_char0, + msm_mux_atest_char1, + msm_mux_atest_char2, + msm_mux_atest_char3, + msm_mux_audio0, + msm_mux_audio1, + msm_mux_audio2, + msm_mux_audio3, + msm_mux_audio_rxbclk, + msm_mux_audio_rxfsync, + msm_mux_audio_rxmclk, + msm_mux_audio_rxmclkin, + msm_mux_audio_txbclk, + msm_mux_audio_txfsync, + msm_mux_audio_txmclk, + msm_mux_audio_txmclkin, + msm_mux_blsp0_i2c, + msm_mux_blsp0_spi, + msm_mux_blsp0_uart, + msm_mux_blsp1_i2c, + msm_mux_blsp1_spi, + msm_mux_blsp1_uart, + msm_mux_blsp2_i2c, + msm_mux_blsp2_spi, + msm_mux_blsp2_uart, + msm_mux_blsp3_i2c, + msm_mux_blsp3_spi, + msm_mux_blsp3_uart, + msm_mux_blsp4_i2c, + msm_mux_blsp4_spi, + msm_mux_blsp4_uart, + msm_mux_blsp5_i2c, + msm_mux_blsp5_uart, + msm_mux_burn0, + msm_mux_burn1, + msm_mux_cri_trng, + msm_mux_cri_trng0, + msm_mux_cri_trng1, + msm_mux_cxc0, + msm_mux_cxc1, + msm_mux_dbg_out, + msm_mux_gcc_plltest, + msm_mux_gcc_tlmm, + msm_mux_gpio, + msm_mux_lpass_aud, + msm_mux_lpass_aud0, + msm_mux_lpass_aud1, + msm_mux_lpass_aud2, + msm_mux_lpass_pcm, + msm_mux_lpass_pdm, + msm_mux_mac00, + msm_mux_mac01, + msm_mux_mac10, + msm_mux_mac11, + msm_mux_mac12, + msm_mux_mac13, + msm_mux_mac20, + msm_mux_mac21, + msm_mux_mdc, + msm_mux_mdio, + msm_mux_pcie0_clk, + msm_mux_pcie0_rst, + msm_mux_pcie0_wake, + msm_mux_prng_rosc, + msm_mux_pta1_0, + msm_mux_pta1_1, + msm_mux_pta1_2, + msm_mux_pta2_0, + msm_mux_pta2_1, + msm_mux_pta2_2, + msm_mux_pwm00, + msm_mux_pwm01, + msm_mux_pwm02, + msm_mux_pwm03, + msm_mux_pwm04, + msm_mux_pwm10, + msm_mux_pwm11, + msm_mux_pwm12, + msm_mux_pwm13, + msm_mux_pwm14, + msm_mux_pwm20, + msm_mux_pwm21, + msm_mux_pwm22, + msm_mux_pwm23, + msm_mux_pwm24, + msm_mux_pwm30, + msm_mux_pwm31, + msm_mux_pwm32, + msm_mux_pwm33, + msm_mux_qdss_cti_trig_in_a0, + msm_mux_qdss_cti_trig_in_a1, + msm_mux_qdss_cti_trig_out_a0, + msm_mux_qdss_cti_trig_out_a1, + msm_mux_qdss_cti_trig_in_b0, + msm_mux_qdss_cti_trig_in_b1, + msm_mux_qdss_cti_trig_out_b0, + msm_mux_qdss_cti_trig_out_b1, + msm_mux_qdss_traceclk_a, + msm_mux_qdss_tracectl_a, + msm_mux_qdss_tracedata_a, + msm_mux_qdss_traceclk_b, + msm_mux_qdss_tracectl_b, + msm_mux_qdss_tracedata_b, + msm_mux_qpic_pad, + msm_mux_rx0, + msm_mux_rx1, + msm_mux_rx_swrm, + msm_mux_rx_swrm0, + msm_mux_rx_swrm1, + msm_mux_sd_card, + msm_mux_sd_write, + msm_mux_tsens_max, + msm_mux_tx_swrm, + msm_mux_tx_swrm0, + msm_mux_tx_swrm1, + msm_mux_tx_swrm2, + msm_mux_wci20, + msm_mux_wci21, + msm_mux_wci22, + msm_mux_wci23, + msm_mux_wsa_swrm, + msm_mux__, +}; + +static const char *const blsp3_uart_groups[] = { +"gpio73" ,"gpio74" ,"gpio75" ,"gpio76" , +}; + +static const char *const blsp3_i2c_groups[] = { +"gpio73" ,"gpio74" , +}; + +static const char *const blsp3_spi_groups[] = { +"gpio73" ,"gpio74" ,"gpio75" ,"gpio76" ,"gpio77" ,"gpio78" ,"gpio79" , +}; + +static const char *const wci20_groups[] = { +"gpio0" ,"gpio2" , +}; + +static const char *const qpic_pad_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio4" ,"gpio9" ,"gpio10" , +"gpio11" ,"gpio17" , +}; + +static const char *const burn0_groups[] = { +"gpio0" , +}; + +static const char *const mac12_groups[] = { +"gpio1" ,"gpio11" , +}; + +static const char *const qdss_tracectl_b_groups[] = { +"gpio1" , +}; + +static const char *const burn1_groups[] = { +"gpio1" , +}; + +static const char *const qdss_traceclk_b_groups[] = { +"gpio0" , +}; + +static const char *const qdss_tracedata_b_groups[] = { +"gpio2" ,"gpio3" ,"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" ,"gpio8" ,"gpio9" , +"gpio10" ,"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" ,"gpio15" ,"gpio16" , +"gpio17" , +}; + +static const char *const mac01_groups[] = { +"gpio3" ,"gpio4" , +}; + +static const char *const mac21_groups[] = { +"gpio5" ,"gpio6" , +}; + +static const char *const atest_char_groups[] = { +"gpio9" , +}; + +static const char *const cxc0_groups[] = { +"gpio9" ,"gpio16" , +}; + +static const char *const mac13_groups[] = { +"gpio9" ,"gpio16" , +}; + +static const char *const dbg_out_groups[] = { +"gpio9" , +}; + +static const char *const wci22_groups[] = { +"gpio11" ,"gpio17" , +}; + +static const char *const pwm00_groups[] = { +"gpio18" , +}; + +static const char *const atest_char0_groups[] = { +"gpio18" , +}; + +static const char *const wci23_groups[] = { +"gpio18" ,"gpio19" , +}; + +static const char *const mac11_groups[] = { +"gpio18" ,"gpio19" , +}; + +static const char *const pwm10_groups[] = { +"gpio19" , +}; + +static const char *const atest_char1_groups[] = { +"gpio19" , +}; + +static const char *const pwm20_groups[] = { +"gpio20" , +}; + +static const char *const atest_char2_groups[] = { +"gpio20" , +}; + +static const char *const pwm30_groups[] = { +"gpio21" , +}; + +static const char *const atest_char3_groups[] = { +"gpio21" , +}; + +static const char *const audio_txmclk_groups[] = { +"gpio22" , +}; + +static const char *const audio_txmclkin_groups[] = { +"gpio22" , +}; + +static const char *const pwm02_groups[] = { +"gpio22" , +}; + +static const char *const tx_swrm0_groups[] = { +"gpio22" , +}; + +static const char *const qdss_cti_trig_out_b0_groups[] = { +"gpio22" , +}; + +static const char *const audio_txbclk_groups[] = { +"gpio23" , +}; + +static const char *const pwm12_groups[] = { +"gpio23" , +}; + +static const char *const wsa_swrm_groups[] = { +"gpio23" ,"gpio24" , +}; + +static const char *const tx_swrm1_groups[] = { +"gpio23" , +}; + +static const char *const qdss_cti_trig_in_b0_groups[] = { +"gpio23" , +}; + +static const char *const audio_txfsync_groups[] = { +"gpio24" , +}; + +static const char *const pwm22_groups[] = { +"gpio24" , +}; + +static const char *const tx_swrm2_groups[] = { +"gpio24" , +}; + +static const char *const qdss_cti_trig_out_b1_groups[] = { +"gpio24" , +}; + +static const char *const audio0_groups[] = { +"gpio25" ,"gpio32" , +}; + +static const char *const pwm32_groups[] = { +"gpio25" , +}; + +static const char *const tx_swrm_groups[] = { +"gpio25" , +}; + +static const char *const qdss_cti_trig_in_b1_groups[] = { +"gpio25" , +}; + +static const char *const audio1_groups[] = { +"gpio26" ,"gpio33" , +}; + +static const char *const pwm04_groups[] = { +"gpio26" , +}; + +static const char *const audio2_groups[] = { +"gpio27" , +}; + +static const char *const pwm14_groups[] = { +"gpio27" , +}; + +static const char *const audio3_groups[] = { +"gpio28" , +}; + +static const char *const pwm24_groups[] = { +"gpio28" , +}; + +static const char *const audio_rxmclk_groups[] = { +"gpio29" , +}; + +static const char *const audio_rxmclkin_groups[] = { +"gpio29" , +}; + +static const char *const pwm03_groups[] = { +"gpio29" , +}; + +static const char *const lpass_pdm_groups[] = { +"gpio29" ,"gpio30" ,"gpio31" ,"gpio32" , +}; + +static const char *const lpass_aud_groups[] = { +"gpio29" , +}; + +static const char *const qdss_cti_trig_in_a1_groups[] = { +"gpio29" , +}; + +static const char *const audio_rxbclk_groups[] = { +"gpio30" , +}; + +static const char *const pwm13_groups[] = { +"gpio30" , +}; + +static const char *const lpass_aud0_groups[] = { +"gpio30" , +}; + +static const char *const rx_swrm_groups[] = { +"gpio30" , +}; + +static const char *const qdss_cti_trig_out_a1_groups[] = { +"gpio30" , +}; + +static const char *const audio_rxfsync_groups[] = { +"gpio31" , +}; + +static const char *const pwm23_groups[] = { +"gpio31" , +}; + +static const char *const lpass_aud1_groups[] = { +"gpio31" , +}; + +static const char *const rx_swrm0_groups[] = { +"gpio31" , +}; + +static const char *const qdss_cti_trig_in_a0_groups[] = { +"gpio31" , +}; + +static const char *const pwm33_groups[] = { +"gpio32" , +}; + +static const char *const lpass_aud2_groups[] = { +"gpio32" , +}; + +static const char *const rx_swrm1_groups[] = { +"gpio32" , +}; + +static const char *const qdss_cti_trig_out_a0_groups[] = { +"gpio32" , +}; + +static const char *const lpass_pcm_groups[] = { +"gpio34" ,"gpio35" ,"gpio36" ,"gpio37" , +}; + +static const char *const mac10_groups[] = { +"gpio34" ,"gpio35" , +}; + +static const char *const mac00_groups[] = { +"gpio34" ,"gpio35" , +}; + +static const char *const mac20_groups[] = { +"gpio36" ,"gpio37" , +}; + +static const char *const blsp0_uart_groups[] = { +"gpio38" ,"gpio39" ,"gpio40" ,"gpio41" , +}; + +static const char *const blsp0_i2c_groups[] = { +"gpio38" ,"gpio39" , +}; + +static const char *const blsp0_spi_groups[] = { +"gpio38" ,"gpio39" ,"gpio40" ,"gpio41" , +}; + +static const char *const blsp2_uart_groups[] = { +"gpio42" ,"gpio43" ,"gpio44" ,"gpio45" , +}; + +static const char *const blsp2_i2c_groups[] = { +"gpio42" ,"gpio43" , +}; + +static const char *const blsp2_spi_groups[] = { +"gpio42" ,"gpio43" ,"gpio44" ,"gpio45" , +}; + +static const char *const blsp5_i2c_groups[] = { +"gpio46" ,"gpio47" , +}; + +static const char *const blsp5_uart_groups[] = { +"gpio48" ,"gpio49" , +}; + +static const char *const qdss_traceclk_a_groups[] = { +"gpio48" , +}; + +static const char *const qdss_tracectl_a_groups[] = { +"gpio49" , +}; + +static const char *const pwm01_groups[] = { +"gpio50" , +}; + +static const char *const pta1_1_groups[] = { +"gpio51" , +}; + +static const char *const pwm11_groups[] = { +"gpio51" , +}; + +static const char *const rx1_groups[] = { +"gpio51" , +}; + +static const char *const pta1_2_groups[] = { +"gpio52" , +}; + +static const char *const pwm21_groups[] = { +"gpio52" , +}; + +static const char *const pta1_0_groups[] = { +"gpio53" , +}; + +static const char *const pwm31_groups[] = { +"gpio53" , +}; + +static const char *const prng_rosc_groups[] = { +"gpio53" , +}; + +static const char *const blsp4_uart_groups[] = { +"gpio55" ,"gpio56" ,"gpio57" ,"gpio58" , +}; + +static const char *const blsp4_i2c_groups[] = { +"gpio55" ,"gpio56" , +}; + +static const char *const blsp4_spi_groups[] = { +"gpio55" ,"gpio56" ,"gpio57" ,"gpio58" , +}; + +static const char *const pcie0_clk_groups[] = { +"gpio59" , +}; + +static const char *const cri_trng0_groups[] = { +"gpio59" , +}; + +static const char *const pcie0_rst_groups[] = { +"gpio60" , +}; + +static const char *const cri_trng1_groups[] = { +"gpio60" , +}; + +static const char *const pcie0_wake_groups[] = { +"gpio61" , +}; + +static const char *const cri_trng_groups[] = { +"gpio61" , +}; + +static const char *const sd_card_groups[] = { +"gpio62" , +}; + +static const char *const sd_write_groups[] = { +"gpio63" , +}; + +static const char *const rx0_groups[] = { +"gpio63" , +}; + +static const char *const tsens_max_groups[] = { +"gpio63" , +}; + +static const char *const mdc_groups[] = { +"gpio64" , +}; + +static const char *const qdss_tracedata_a_groups[] = { +"gpio64" ,"gpio65" ,"gpio66" ,"gpio67" ,"gpio68" ,"gpio69" ,"gpio70" , +"gpio71" ,"gpio72" ,"gpio73" ,"gpio74" ,"gpio75" ,"gpio76" ,"gpio77" , +"gpio78" ,"gpio79" , +}; + +static const char *const mdio_groups[] = { +"gpio65" , +}; + +static const char *const pta2_0_groups[] = { +"gpio66" , +}; + +static const char *const wci21_groups[] = { +"gpio66" ,"gpio68" , +}; + +static const char *const cxc1_groups[] = { +"gpio66" ,"gpio68" , +}; + +static const char *const pta2_1_groups[] = { +"gpio67" , +}; + +static const char *const pta2_2_groups[] = { +"gpio68" , +}; + +static const char *const blsp1_uart_groups[] = { +"gpio69" ,"gpio70" ,"gpio71" ,"gpio72" , +}; + +static const char *const blsp1_i2c_groups[] = { +"gpio69" ,"gpio70" , +}; + +static const char *const blsp1_spi_groups[] = { +"gpio69" ,"gpio70" ,"gpio71" ,"gpio72" , +}; + +static const char *const gcc_plltest_groups[] = { +"gpio69" ,"gpio71" , +}; + +static const char *const gcc_tlmm_groups[] = { +"gpio70" , +}; + +static const char *const gpio_groups[] = { +"gpio0" ,"gpio1" ,"gpio2" ,"gpio3" ,"gpio4" ,"gpio5" ,"gpio6" ,"gpio7" , +"gpio8" ,"gpio9" ,"gpio10" ,"gpio11" ,"gpio12" ,"gpio13" ,"gpio14" , +"gpio15" ,"gpio16" ,"gpio17" ,"gpio18" ,"gpio19" ,"gpio20" ,"gpio21" , +"gpio22" ,"gpio23" ,"gpio24" ,"gpio25" ,"gpio26" ,"gpio27" ,"gpio28" , +"gpio29" ,"gpio30" ,"gpio31" ,"gpio32" ,"gpio33" ,"gpio34" ,"gpio35" , +"gpio36" ,"gpio37" ,"gpio38" ,"gpio39" ,"gpio40" ,"gpio41" ,"gpio42" , +"gpio43" ,"gpio44" ,"gpio45" ,"gpio46" ,"gpio47" ,"gpio48" ,"gpio49" , +"gpio50" ,"gpio51" ,"gpio52" ,"gpio53" ,"gpio54" ,"gpio55" ,"gpio56" , +"gpio57" ,"gpio58" ,"gpio59" ,"gpio60" ,"gpio61" ,"gpio62" ,"gpio63" , +"gpio64" ,"gpio65" ,"gpio66" ,"gpio67" ,"gpio68" ,"gpio69" ,"gpio70" , +"gpio71" ,"gpio72" ,"gpio73" ,"gpio74" ,"gpio75" ,"gpio76" ,"gpio77" , +"gpio78" ,"gpio79" , +}; + +static const struct msm_function ipq6018_functions[] = { +FUNCTION (atest_char), +FUNCTION (atest_char0), +FUNCTION (atest_char1), +FUNCTION (atest_char2), +FUNCTION (atest_char3), +FUNCTION (audio0), +FUNCTION (audio1), +FUNCTION (audio2), +FUNCTION (audio3), +FUNCTION (audio_rxbclk), +FUNCTION (audio_rxfsync), +FUNCTION (audio_rxmclk), +FUNCTION (audio_rxmclkin), +FUNCTION (audio_txbclk), +FUNCTION (audio_txfsync), +FUNCTION (audio_txmclk), +FUNCTION (audio_txmclkin), +FUNCTION (blsp0_i2c), +FUNCTION (blsp0_spi), +FUNCTION (blsp0_uart), +FUNCTION (blsp1_i2c), +FUNCTION (blsp1_spi), +FUNCTION (blsp1_uart), +FUNCTION (blsp2_i2c), +FUNCTION (blsp2_spi), +FUNCTION (blsp2_uart), +FUNCTION (blsp3_i2c), +FUNCTION (blsp3_spi), +FUNCTION (blsp3_uart), +FUNCTION (blsp4_i2c), +FUNCTION (blsp4_spi), +FUNCTION (blsp4_uart), +FUNCTION (blsp5_i2c), +FUNCTION (blsp5_uart), +FUNCTION (burn0), +FUNCTION (burn1), +FUNCTION (cri_trng), +FUNCTION (cri_trng0), +FUNCTION (cri_trng1), +FUNCTION (cxc0), +FUNCTION (cxc1), +FUNCTION (dbg_out), +FUNCTION (gcc_plltest), +FUNCTION (gcc_tlmm), +FUNCTION (gpio), +FUNCTION (lpass_aud), +FUNCTION (lpass_aud0), +FUNCTION (lpass_aud1), +FUNCTION (lpass_aud2), +FUNCTION (lpass_pcm), +FUNCTION (lpass_pdm), +FUNCTION (mac00), +FUNCTION (mac01), +FUNCTION (mac10), +FUNCTION (mac11), +FUNCTION (mac12), +FUNCTION (mac13), +FUNCTION (mac20), +FUNCTION (mac21), +FUNCTION (mdc), +FUNCTION (mdio), +FUNCTION (pcie0_clk), +FUNCTION (pcie0_rst), +FUNCTION (pcie0_wake), +FUNCTION (prng_rosc), +FUNCTION (pta1_0), +FUNCTION (pta1_1), +FUNCTION (pta1_2), +FUNCTION (pta2_0), +FUNCTION (pta2_1), +FUNCTION (pta2_2), +FUNCTION (pwm00), +FUNCTION (pwm01), +FUNCTION (pwm02), +FUNCTION (pwm03), +FUNCTION (pwm04), +FUNCTION (pwm10), +FUNCTION (pwm11), +FUNCTION (pwm12), +FUNCTION (pwm13), +FUNCTION (pwm14), +FUNCTION (pwm20), +FUNCTION (pwm21), +FUNCTION (pwm22), +FUNCTION (pwm23), +FUNCTION (pwm24), +FUNCTION (pwm30), +FUNCTION (pwm31), +FUNCTION (pwm32), +FUNCTION (pwm33), +FUNCTION (qdss_cti_trig_in_a0), +FUNCTION (qdss_cti_trig_in_a1), +FUNCTION (qdss_cti_trig_out_a0), +FUNCTION (qdss_cti_trig_out_a1), +FUNCTION (qdss_cti_trig_in_b0), +FUNCTION (qdss_cti_trig_in_b1), +FUNCTION (qdss_cti_trig_out_b0), +FUNCTION (qdss_cti_trig_out_b1), +FUNCTION (qdss_traceclk_a), +FUNCTION (qdss_tracectl_a), +FUNCTION (qdss_tracedata_a), +FUNCTION (qdss_traceclk_b), +FUNCTION (qdss_tracectl_b), +FUNCTION (qdss_tracedata_b), +FUNCTION (qpic_pad), +FUNCTION (rx0), +FUNCTION (rx1), +FUNCTION (rx_swrm), +FUNCTION (rx_swrm0), +FUNCTION (rx_swrm1), +FUNCTION (sd_card), +FUNCTION (sd_write), +FUNCTION (tsens_max), +FUNCTION (tx_swrm), +FUNCTION (tx_swrm0), +FUNCTION (tx_swrm1), +FUNCTION (tx_swrm2), +FUNCTION (wci20), +FUNCTION (wci21), +FUNCTION (wci22), +FUNCTION (wci23), +FUNCTION (wsa_swrm), +}; + +static const struct msm_pingroup ipq6018_groups[] = { +PINGROUP (0 , qpic_pad, wci20, qdss_traceclk_b, _, burn0, _, _, _, _), +PINGROUP (1 , qpic_pad, mac12, qdss_tracectl_b, _, burn1, _, _, _, _), +PINGROUP (2 , qpic_pad, wci20, qdss_tracedata_b, _, _, _, _, _, _), +PINGROUP (3 , qpic_pad, mac01, qdss_tracedata_b, _, _, _, _, _, _), +PINGROUP (4 , qpic_pad, mac01, qdss_tracedata_b, _, _, _, _, _, _), +PINGROUP (5 , qpic_pad, mac21, qdss_tracedata_b, _, _, _, _, _, _), +PINGROUP (6 , qpic_pad, mac21, qdss_tracedata_b, _, _, _, _, _, _), +PINGROUP (7 , qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (8 , qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (9 , qpic_pad, atest_char, cxc0, mac13, dbg_out, qdss_tracedata_b, _, _, _), +PINGROUP (10 , qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (11 , qpic_pad, wci22, mac12, qdss_tracedata_b, _, _, _, _, _), +PINGROUP (12 , qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (13 , qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (14 , qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (15 , qpic_pad, qdss_tracedata_b, _, _, _, _, _, _, _), +PINGROUP (16 , qpic_pad, cxc0, mac13, qdss_tracedata_b, _, _, _, _, _), +PINGROUP (17 , qpic_pad, qdss_tracedata_b, wci22, _, _, _, _, _, _), +PINGROUP (18 , pwm00, atest_char0, wci23, mac11, _, _, _, _, _), +PINGROUP (19 , pwm10, atest_char1, wci23, mac11, _, _, _, _, _), +PINGROUP (20 , pwm20, atest_char2, _, _, _, _, _, _, _), +PINGROUP (21 , pwm30, atest_char3, _, _, _, _, _, _, _), +PINGROUP (22 , audio_txmclk, audio_txmclkin, pwm02, tx_swrm0, _, qdss_cti_trig_out_b0, _, _, _), +PINGROUP (23 , audio_txbclk, pwm12, wsa_swrm, tx_swrm1, _, qdss_cti_trig_in_b0, _, _, _), +PINGROUP (24 , audio_txfsync, pwm22, wsa_swrm, tx_swrm2, _, qdss_cti_trig_out_b1, _, _, _), +PINGROUP (25 , audio0, pwm32, tx_swrm, _, qdss_cti_trig_in_b1, _, _, _, _), +PINGROUP (26 , audio1, pwm04, _, _, _, _, _, _, _), +PINGROUP (27 , audio2, pwm14, _, _, _, _, _, _, _), +PINGROUP (28 , audio3, pwm24, _, _, _, _, _, _, _), +PINGROUP (29 , audio_rxmclk, audio_rxmclkin, pwm03, lpass_pdm, lpass_aud, qdss_cti_trig_in_a1, _, _, _), +PINGROUP (30 , audio_rxbclk, pwm13, lpass_pdm, lpass_aud0, rx_swrm, _, qdss_cti_trig_out_a1, _, _), +PINGROUP (31 , audio_rxfsync, pwm23, lpass_pdm, lpass_aud1, rx_swrm0, _, qdss_cti_trig_in_a0, _, _), +PINGROUP (32 , audio0, pwm33, lpass_pdm, lpass_aud2, rx_swrm1, _, qdss_cti_trig_out_a0, _, _), +PINGROUP (33 , audio1, _, _, _, _, _, _, _, _), +PINGROUP (34 , lpass_pcm, mac10, mac00, _, _, _, _, _, _), +PINGROUP (35 , lpass_pcm, mac10, mac00, _, _, _, _, _, _), +PINGROUP (36 , lpass_pcm, mac20, _, _, _, _, _, _, _), +PINGROUP (37 , lpass_pcm, mac20, _, _, _, _, _, _, _), +PINGROUP (38 , blsp0_uart, blsp0_i2c, blsp0_spi, _, _, _, _, _, _), +PINGROUP (39 , blsp0_uart, blsp0_i2c, blsp0_spi, _, _, _, _, _, _), +PINGROUP (40 , blsp0_uart, blsp0_spi, _, _, _, _, _, _, _), +PINGROUP (41 , blsp0_uart, blsp0_spi, _, _, _, _, _, _, _), +PINGROUP (42 , blsp2_uart, blsp2_i2c, blsp2_spi, _, _, _, _, _, _), +PINGROUP (43 , blsp2_uart, blsp2_i2c, blsp2_spi, _, _, _, _, _, _), +PINGROUP (44 , blsp2_uart, blsp2_spi, _, _, _, _, _, _, _), +PINGROUP (45 , blsp2_uart, blsp2_spi, _, _, _, _, _, _, _), +PINGROUP (46 , blsp5_i2c, _, _, _, _, _, _, _, _), +PINGROUP (47 , blsp5_i2c, _, _, _, _, _, _, _, _), +PINGROUP (48 , blsp5_uart, _, qdss_traceclk_a, _, _, _, _, _, _), +PINGROUP (49 , blsp5_uart, _, qdss_tracectl_a, _, _, _, _, _, _), +PINGROUP (50 , pwm01, _, _, _, _, _, _, _, _), +PINGROUP (51 , pta1_1, pwm11, _, rx1, _, _, _, _, _), +PINGROUP (52 , pta1_2, pwm21, _, _, _, _, _, _, _), +PINGROUP (53 , pta1_0, pwm31, prng_rosc, _, _, _, _, _, _), +PINGROUP (54 , _, _, _, _, _, _, _, _, _), +PINGROUP (55 , blsp4_uart, blsp4_i2c, blsp4_spi, _, _, _, _, _, _), +PINGROUP (56 , blsp4_uart, blsp4_i2c, blsp4_spi, _, _, _, _, _, _), +PINGROUP (57 , blsp4_uart, blsp4_spi, _, _, _, _, _, _, _), +PINGROUP (58 , blsp4_uart, blsp4_spi, _, _, _, _, _, _, _), +PINGROUP (59 , pcie0_clk, _, _, cri_trng0, _, _, _, _, _), +PINGROUP (60 , pcie0_rst, _, _, cri_trng1, _, _, _, _, _), +PINGROUP (61 , pcie0_wake, _, _, cri_trng, _, _, _, _, _), +PINGROUP (62 , sd_card, _, _, _, _, _, _, _, _), +PINGROUP (63 , sd_write, rx0, _, tsens_max, _, _, _, _, _), +PINGROUP (64 , mdc, _, qdss_tracedata_a, _, _, _, _, _, _), +PINGROUP (65 , mdio, _, qdss_tracedata_a, _, _, _, _, _, _), +PINGROUP (66 , pta2_0, wci21, cxc1, qdss_tracedata_a, _, _, _, _, _), +PINGROUP (67 , pta2_1, qdss_tracedata_a, _, _, _, _, _, _, _), +PINGROUP (68 , pta2_2, wci21, cxc1, qdss_tracedata_a, _, _, _, _, _), +PINGROUP (69 , blsp1_uart, blsp1_i2c, blsp1_spi, gcc_plltest, qdss_tracedata_a, _, _, _, _), +PINGROUP (70 , blsp1_uart, blsp1_i2c, blsp1_spi, gcc_tlmm, qdss_tracedata_a, _, _, _, _), +PINGROUP (71 , blsp1_uart, blsp1_spi, gcc_plltest, qdss_tracedata_a, _, _, _, _, _), +PINGROUP (72 , blsp1_uart, blsp1_spi, qdss_tracedata_a, _, _, _, _, _, _), +PINGROUP (73 , blsp3_uart, blsp3_i2c, blsp3_spi, _, qdss_tracedata_a, _, _, _, _), +PINGROUP (74 , blsp3_uart, blsp3_i2c, blsp3_spi, _, qdss_tracedata_a, _, _, _, _), +PINGROUP (75 , blsp3_uart, blsp3_spi, _, qdss_tracedata_a, _, _, _, _, _), +PINGROUP (76 , blsp3_uart, blsp3_spi, _, qdss_tracedata_a, _, _, _, _, _), +PINGROUP (77 , blsp3_spi, _, qdss_tracedata_a, _, _, _, _, _, _), +PINGROUP (78 , blsp3_spi, _, qdss_tracedata_a, _, _, _, _, _, _), +PINGROUP (79 , blsp3_spi, _, qdss_tracedata_a, _, _, _, _, _, _), +}; + +static const struct msm_pinctrl_soc_data ipq6018_pinctrl = { + .pins = ipq6018_pins, + .npins =ARRAY_SIZE (ipq6018_pins), + .functions = ipq6018_functions, + .nfunctions =ARRAY_SIZE (ipq6018_functions), + .groups = ipq6018_groups, + .ngroups =ARRAY_SIZE (ipq6018_groups), + .ngpios =80 , +}; + +static int ipq6018_pinctrl_probe (struct platform_device *pdev) +{ +return msm_pinctrl_probe (pdev, &ipq6018_pinctrl); +} + +static const struct of_device_id ipq6018_pinctrl_of_match[] = { + { .compatible ="qcom,ipq6018-pinctrl" , }, + { }, +}; + +static struct platform_driver ipq6018_pinctrl_driver = { + .driver = { + .name ="ipq6018-pinctrl" , + .of_match_table = ipq6018_pinctrl_of_match, + }, + .probe = ipq6018_pinctrl_probe, + .remove = msm_pinctrl_remove, +}; + +static int __init ipq6018_pinctrl_init (void ) +{ +return platform_driver_register (&ipq6018_pinctrl_driver); +} +arch_initcall (ipq6018_pinctrl_init); + +static void __exit ipq6018_pinctrl_exit(void) +{ +platform_driver_unregister (&ipq6018_pinctrl_driver); +} +module_exit (ipq6018_pinctrl_exit); + +MODULE_DESCRIPTION ("QTI ipq6018 pinctrl driver" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_DEVICE_TABLE (of, ipq6018_pinctrl_of_match);Signature · 1 line
1.9.1
PATCH v3 3/5 dt-bindings: qcom: Add ipq6018 bindings
In reply to Sricharan RDocument the new ipq6018 SOC/board device tree bindings.
--- Documentation/devicetree/bindings/arm/qcom.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)
Documentation/devicetree/bindings/arm/qcom.yaml +8 -0
@@ -28,6 +28,7 @@ description: | apq8074 apq8084 apq8096 + ipq6018 ipq8074 mdm9615 msm8916
@@ -41,6 +42,7 @@ description: | The 'board' element must be one of the following strings: cdp + cp01-c1 dragonboard hk01 idp
@@ -150,4 +152,10 @@ properties: - enum: - qcom,sc7180-idp - const: qcom,sc7180 + + - items: + - enum: + - qcom,ipq6018-cp01-c1 + - const: qcom,ipq6018 + ...
Signature · 1 line
1.9.1
Re: [PATCH V3 3/5] dt-bindings: qcom: Add ipq6018 bindings
Quoted 11 lines · Sricharan R
Document the new ipq6018 SOC/board device tree bindings.
Co-developed-by Selvam Sathappan Periakaruppan <[email protected]>Signed-off-by Selvam Sathappan Periakaruppan <[email protected]>Co-developed-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sivaprakash Murugesan <[email protected]>Signed-off-by Sricharan R <[email protected]>--- Documentation/devicetree/bindings/arm/qcom.yaml | 8 ++++++++ 1 file changed, 8 insertions(+)
PATCH v3 4/5 arm64: dts: Add ipq6018 SoC and CP01 board support
In reply to Sricharan RAdd initial device tree support for the Qualcomm IPQ6018 SoC and CP01 evaluation board.
---
[v3] Fixed the uart pinctrl node, moved soc node down the
tree. This has build dependency with,
https://patchwork.ozlabs.org/patch/1217293/
arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 30 ++++ arch/arm64/boot/dts/qcom/ipq6018.dtsi | 215 +++++++++++++++++++++++++++ 3 files changed, 246 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
arch/arm64/boot/dts/qcom/Makefile +1 -0
@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_QCOM) += apq8016-sbc.dtb dtb-$(CONFIG_ARCH_QCOM) += apq8096-db820c.dtb +dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8916-longcheer-l8150.dtb
arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts new file +30 -0
@@ -0,0 +1,30 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ6018 CP01 board device tree source + * + * Copyright (c) 2019, The Linux Foundation. All rights reserved. + */ + +/dts-v1/; + +#include "ipq6018.dtsi" + +/ { + model = "Qualcomm Technologies, Inc. IPQ6018/AP-CP01-C1"; + compatible = "qcom,ipq6018-cp01", "qcom,ipq6018"; + + aliases { + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + bootargs-append = " swiotlb=1"; + }; +}; + +&blsp1_uart3 { + pinctrl-0 = <&serial_3_pins>; + pinctrl-names = "default"; + status = "ok"; +};
arch/arm64/boot/dts/qcom/ipq6018.dtsi new file +215 -0
215 lines not on this page · raw message
Signature · 1 line
1.9.1
PATCH v3 5/5 arm64: defconfig: Enable qcom ipq6018 clock and pinctrl
In reply to Sricharan RThese configs are required for booting kernel in qcom ipq6018 boards.
--- arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/configs/defconfig +2 -0
@@ -403,6 +403,7 @@ CONFIG_PINCTRL_IMX8MN=y CONFIG_PINCTRL_IMX8MQ=y CONFIG_PINCTRL_IMX8QXP=y CONFIG_PINCTRL_IPQ8074=y +CONFIG_PINCTRL_IPQ6018=y CONFIG_PINCTRL_MSM8916=y CONFIG_PINCTRL_MSM8994=y CONFIG_PINCTRL_MSM8996=y
@@ -709,6 +710,7 @@ CONFIG_QCOM_CLK_APCS_MSM8916=y CONFIG_QCOM_CLK_SMD_RPM=y CONFIG_QCOM_CLK_RPMH=y CONFIG_IPQ_GCC_8074=y +CONFIG_IPQ_GCC_6018=y CONFIG_MSM_GCC_8916=y CONFIG_MSM_GCC_8994=y CONFIG_MSM_MMCC_8996=y
Signature · 1 line
1.9.1