libata: Apply NOLPM quirk for SAMSUNG MZ7TD256HAFV-000L9
Subsystems (2)
PATCH v3 1/1 libata: Apply NOLPM quirk for SAMSUNG MZ7TD256HAFV-000L9
med_power_with_dipm causes my T450 to freeze with a SAMSUNG MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q).
Switching the LPM to max_performance fixes this issue.
--- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+)
drivers/ata/libata-core.c +1 -0
@@ -4553,6 +4553,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {/* These specific Samsung models/firmware-revs do not handle LPM well */ { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, }, { "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM, }, + { "SAMSUNG MZ7TD256HAFV-000L9", "DXT02L5Q", ATA_HORKAGE_NOLPM, }, /* devices that don't properly handle queued TRIM commands */ { "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
Signature · 1 line
2.19.1
Hi,
Quoted 6 lines · Diego Viola
med_power_with_dipmcauses my T450 to freeze with a SAMSUNG MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q).Switching the LPM to
max_performancefixes this issue.Signed-off-by Diego Viola <[email protected]>
Thanks, looks good to me:
Regards,
Hans
Quoted 17 lines
--- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+)drivers/ata/libata-core.c +1
-0@@ -4553,6 +4553,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {/* These specific Samsung models/firmware-revs do not handle LPM well */ { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, }, { "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM, }, + { "SAMSUNG MZ7TD256HAFV-000L9", "DXT02L5Q", ATA_HORKAGE_NOLPM, }, /* devices that don't properly handle queued TRIM commands */ { "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM |
Jens Axboe
AppliedQuoted 4 lines · Diego Viola
med_power_with_dipmcauses my T450 to freeze with a SAMSUNG MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q).Switching the LPM to
max_performancefixes this issue.
Applied, thanks.
Signature · 1 line
Jens Axboe
Quoted 5 lines · Jens Axboe
Quoted 3 lines · Diego Viola
med_power_with_dipmcauses my T450 to freeze with a SAMSUNG MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q).
Quoted 7 lines
Quoted 1 line
Switching the LPM to
max_performancefixes this issue.Applied, thanks.
--
Jens Axboe
Jens, Hans,
Thank you.
Diego
Quoted 15 lines · Diego Viola
Quoted 5 lines · Jens Axboe
Quoted 3 lines · Diego Viola
med_power_with_dipmcauses my T450 to freeze with a SAMSUNG MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q).Quoted 7 lines
Quoted 1 line
Switching the LPM to
max_performancefixes this issue.Applied, thanks.
--
Jens Axboe
Quoted 5 lines
Jens, Hans,
Thank you.
Diego
Hi Hans and Jens,
I just wanted to give you guys an update about this problem.
I've managed to update my SSD firmware to the latest version[1].
For running the update, I've had to install Windows 10, ran the firmware update, remove Windows and reinstall Arch Linux.
The latest version of the firmware is DXT04L5Q, and it looks like there hasn't been a new update since 2015.
I'll be running with med_power_with_dipm and hope this firmware update fixes the problem, if it doesn't and I get another freeze, I'll send another patch blacklisting the drive completely. Is that OK?
1. https://support.lenovo.com/br/en/downloads/ds038904
Thanks and Best Regards,
Diego
Hi,
Quoted 31 lines · Diego Viola
Quoted 15 lines · Diego Viola
Quoted 5 lines · Jens Axboe
Quoted 3 lines · Diego Viola
med_power_with_dipmcauses my T450 to freeze with a SAMSUNG MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q).Quoted 7 lines
Quoted 1 line
Switching the LPM to
max_performancefixes this issue.Applied, thanks.
--
Jens AxboeQuoted 5 lines
Jens, Hans,
Thank you.
Diego
Hi Hans and Jens,
I just wanted to give you guys an update about this problem.
I've managed to update my SSD firmware to the latest version[1].
For running the update, I've had to install Windows 10, ran the firmware update, remove Windows and reinstall Arch Linux.
Quoted 6 lines
The latest version of the firmware is DXT04L5Q, and it looks like there hasn't been a new update since 2015.
I'll be running with
med_power_with_dipmand hope this firmware update fixes the problem, if it doesn't and I get another freeze, I'll send another patch blacklisting the drive completely. Is that OK?
Yes, if it still happens with the latest firmware then blacklisting it completely is the right thing to do.
Unfortunately for reasons which I do not understand OEM SSDs often use different (customized?) firmware compared to the model on which they are based and often see less updates and seem to have more bugs :|
Regards,
Hans
Hi Hans,
Quoted 45 lines · Hans de Goede
Hi,
Quoted 31 lines · Diego Viola
Quoted 15 lines · Diego Viola
Quoted 5 lines · Jens Axboe
Quoted 3 lines · Diego Viola
med_power_with_dipmcauses my T450 to freeze with a SAMSUNG MZ7TD256HAFV-000L9 SSD (firmware DXT02L5Q).Quoted 7 lines
Quoted 1 line
Switching the LPM to
max_performancefixes this issue.Applied, thanks.
--
Jens AxboeQuoted 5 lines
Jens, Hans,
Thank you.
Diego
Hi Hans and Jens,
I just wanted to give you guys an update about this problem.
I've managed to update my SSD firmware to the latest version[1].
For running the update, I've had to install Windows 10, ran the firmware update, remove Windows and reinstall Arch Linux.
Quoted 6 lines
The latest version of the firmware is DXT04L5Q, and it looks like there hasn't been a new update since 2015.
I'll be running with
med_power_with_dipmand hope this firmware update fixes the problem, if it doesn't and I get another freeze, I'll send another patch blacklisting the drive completely. Is that OK?Yes, if it still happens with the latest firmware then blacklisting it completely is the right thing to do.
Quoted 7 lines
Unfortunately for reasons which I do not understand OEM SSDs often use different (customized?) firmware compared to the model on which they are based and often see less updates and seem to have more bugs :|
Regards,
Hans
I've just got another freeze with the latest firmware while I was watching some YouTube videos. I think it's safe to assume this drive is borked and won't get better, I'll send another patch.
Thanks,
Diego