ARM: dts: odroidxu3: Enable USB3 regulators

Enable regulator for usbdrd3_0 and usbdrd3_1. Looking at the schematic pin diagram for MAX77802 USB3_0 and USB3_1 is regulated by LDO9 and LD011.

Fix the boot message of failed.

[    3.503539] exynos-dwc3 usb at 12000000: Looking up vdd33-supply from device tree
[    3.503556] exynos-dwc3 usb at 12000000: Looking up vdd33-supply property in node /usb at 12000000 failed
[    3.503568] usb at 12000000 supply vdd33 not found, using dummy regulator
[    3.509154] exynos-dwc3 usb at 12000000: Looking up vdd10-supply from device tree
[    3.509170] exynos-dwc3 usb at 12000000: Looking up vdd10-supply property in node /usb at 12000000 failed
[    3.509181] usb at 12000000 supply vdd10 not found, using dummy regulator
[    3.917548] exynos-dwc3 usb at 12400000: Looking up vdd33-supply from device tree
[    3.917565] exynos-dwc3 usb at 12400000: Looking up vdd33-supply property in node /usb at 12400000 failed
[    3.917578] usb at 12400000 supply vdd33 not found, using dummy regulator
[    3.922731] exynos-dwc3 usb at 12400000: Looking up vdd10-supply from device tree
[    3.922747] exynos-dwc3 usb at 12400000: Looking up vdd10-supply property in node /usb at 12400000 failed

---
 arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

index 8adf455..deb8d78 100644
@@ -477,3 +477,13 @@
 &usbdrd_dwc3_1 {
 	dr_mode = "otg";
 };
+
+&usbdrd3_0 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+	vdd33-supply = <&ldo9_reg>;
+	vdd10-supply = <&ldo11_reg>;
+};

2.4.3

W dniu 07.06.2015 o 20:53, Anand Moon pisze:

Thanks, applied with minor adjustments in commit message (joined first three sentences into one paragraph, changed description of dmesg).

I'll send later to Kukjin for 4.3 (unless he picks it also).

Best regards,
Krzysztof