aspeed: Add boot from eMMC support (AST2600)
cover aspeed: Add boot from eMMC support (AST2600)
From: Cédric Le Goater <[email protected]>
Hello,
This series enables boot from eMMC on the rainier-bmc machine, which is the default behavior and also on the AST2600 EVB using a machine option to change the default.
It depends solely on the availability of an eMMC device model which is currently being discussed upstream. Numerous patches have been merged already and remaining ones [1] should be in 9.1 development cycle. Since the changes of this series are small and localized, it would be an interesting extension of the AST2600 SoC model for QEMU 9.1.
First 6 patches adjust the machine setup and HW strapping to boot from eMMC, the last 2 are for the AST2600 EVB and are optional.
Thanks,
C.
[1] https://github.com/legoater/qemu/commits/aspeed-9.1
Cédric Le Goater (8):
aspeed: Change type of eMMC device
aspeed: Load eMMC first boot area as a boot rom aspeed/scu: Add boot-from-eMMC HW strapping bit for AST2600 SoC
aspeed: Introduce a AspeedSoCClass 'boot_from_emmc' handler
aspeed: Set eMMC 'boot-config' property to reflect HW strapping
aspeed: Add boot-from-eMMC HW strapping bit to rainier-bmc machine
aspeed: Introduce a 'hw_strap1' machine attribute
aspeed: Introduce a 'boot-emmc' machine option
docs/system/arm/aspeed.rst | 2 ++ include/hw/arm/aspeed_soc.h | 1 + include/hw/misc/aspeed_scu.h | 4 +++ hw/arm/aspeed.c | 60 +++++++++++++++++++++++++++++++----- hw/arm/aspeed_ast2600.c | 8 +++++ hw/arm/aspeed_soc_common.c | 7 +++++ 6 files changed, 74 insertions(+), 8 deletions(-)
Signature · 1 line
2.45.2
PATCH 1/8 aspeed: Change type of eMMC device
From: Cédric Le Goater <[email protected]>
The QEMU device representing the eMMC device of machine is currently created with type SD_CARD. Change the type to EMMC now that it is available.
--- hw/arm/aspeed.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
hw/arm/aspeed.c +5 -4
@@ -327,14 +327,14 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo) +static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc) {DeviceState *card;if (!dinfo) {return ; } - card =qdev_new (TYPE_SD_CARD ); + card =qdev_new (emmc ?TYPE_EMMC :TYPE_SD_CARD );qdev_prop_set_drive_err (card,"drive" ,blk_by_legacy_dinfo (dinfo), &error_fatal); qdev_realize_and_unref(card,
@@ -436,12 +436,13 @@ static void aspeed_machine_init(MachineState *machine)for (i =0 ; i < bmc->soc->sdhci.num_slots; i++) {sdhci_attach_drive (&bmc->soc->sdhci.slots[i], -drive_get (IF_SD ,0 , i)); +drive_get (IF_SD ,0 , i), false); }if (bmc->soc->emmc.num_slots) {sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], -drive_get (IF_SD ,0 , bmc->soc->sdhci.num_slots)); +drive_get (IF_SD ,0 , bmc->soc->sdhci.num_slots), + true); }if (!bmc->mmio_exec) {
Signature · 1 line
2.45.2
Re: [PATCH 1/8] aspeed: Change type of eMMC device
Quoted 7 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
The QEMU device representing the eMMC device of machine is currently created with type
SD_CARD. Change the type to EMMC now that it is available.Signed-off-by Cédric Le Goater <[email protected]>
Re: [PATCH 1/8] aspeed: Change type of eMMC device
In reply to Cédric Le GoaterQuoted 10 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
The QEMU device representing the eMMC device of machine is currently created with type
SD_CARD. Change the type to EMMC now that it is available.Signed-off-by Cédric Le Goater <[email protected]>--- hw/arm/aspeed.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
PATCH 2/8 aspeed: Load eMMC first boot area as a boot rom
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
The first boot area partition (64K) of the eMMC device should contain an initial boot loader (u-boot SPL). Load it as a ROM only if an eMMC device is available to boot from but no flash device is.
--- hw/arm/aspeed.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
hw/arm/aspeed.c +5 -3
@@ -364,6 +364,7 @@ static void aspeed_machine_init(MachineState *machine)AspeedMachineClass *amc =ASPEED_MACHINE_GET_CLASS (machine);AspeedSoCClass *sc;int i; +DriveInfo *emmc0 =NULL ; bmc->soc =ASPEED_SOC (object_new (amc->soc_name));object_property_add_child (OBJECT (machine),"soc" ,OBJECT (bmc->soc));
@@ -440,9 +441,8 @@ static void aspeed_machine_init(MachineState *machine) }if (bmc->soc->emmc.num_slots) { -sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], -drive_get (IF_SD ,0 , bmc->soc->sdhci.num_slots), - true); + emmc0 =drive_get (IF_SD ,0 , bmc->soc->sdhci.num_slots); +sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], emmc0, true); }if (!bmc->mmio_exec) {
@@ -452,6 +452,8 @@ static void aspeed_machine_init(MachineState *machine)if (fmc0) {uint64_t rom_size =memory_region_size (&bmc->soc->spi_boot);aspeed_install_boot_rom (bmc, fmc0, rom_size); + }else if (emmc0) { +aspeed_install_boot_rom (bmc,blk_by_legacy_dinfo (emmc0),64 * KiB); } }
Signature · 1 line
2.45.2
Re: [PATCH 2/8] aspeed: Load eMMC first boot area as a boot rom
Quoted 7 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
The first boot area partition (64K) of the eMMC device should contain an initial boot loader (u-boot SPL). Load it as a ROM only if an eMMC device is available to boot from but no flash device is.
Signed-off-by Cédric Le Goater <[email protected]>
PATCH 3/8 aspeed/scu: Add boot-from-eMMC HW strapping bit for AST2600 SoC
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
Bit SCU500[2] of the AST2600 controls the boot device of the SoC.
Future changes will configure this bit to boot from eMMC disk images specially built for this purpose.
--- include/hw/misc/aspeed_scu.h | 4 ++++ 1 file changed, 4 insertions(+)
include/hw/misc/aspeed_scu.h +4 -0
@@ -349,6 +349,10 @@ uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s);#define SCU_AST2600_H_PLL_BYPASS_EN (0x1 << 24)#define SCU_AST2600_H_PLL_OFF (0x1 << 23) +/* STRAP1 SCU500 */ +#define AST2600_HW_STRAP_BOOT_SRC_EMMC (0x1 << 2) +#define AST2600_HW_STRAP_BOOT_SRC_SPI (0x0 << 2) +/* * SCU310 Clock Selection Register Set 4 (for Aspeed AST1030 SOC) *
Signature · 1 line
2.45.2
Re: [PATCH 3/8] aspeed/scu: Add boot-from-eMMC HW strapping bit for AST2600 SoC
Quoted 18 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
Bit SCU500[2] of the AST2600 controls the boot device of the SoC.
Future changes will configure this bit to boot from eMMC disk images specially built for this purpose.
Signed-off-by Joel Stanley <[email protected]>Signed-off-by Cédric Le Goater <[email protected]>--- include/hw/misc/aspeed_scu.h | 4 ++++ 1 file changed, 4 insertions(+)include/hw/misc/aspeed_scu.h +0
-0
include/hw/misc/aspeed_scu.h uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s); · line 354
Quoted 6 lines
include/hw/misc/aspeed_scu.h +3
-0@@ -349,6 +349,10 @@ uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s);#define SCU_AST2600_H_PLL_BYPASS_EN (0x1 << 24)#define SCU_AST2600_H_PLL_OFF (0x1 << 23) +/* STRAP1 SCU500 */ +#define AST2600_HW_STRAP_BOOT_SRC_EMMC (0x1 << 2) +#define AST2600_HW_STRAP_BOOT_SRC_SPI (0x0 << 2)
Maybe these should have a SCU_ prefix for consistency?
Anyway:
Re: [PATCH 3/8] aspeed/scu: Add boot-from-eMMC HW strapping bit for AST2600 SoC
Quoted 22 lines · Andrew Jeffery
Quoted 21 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
Bit SCU500[2] of the AST2600 controls the boot device of the SoC.
Future changes will configure this bit to boot from eMMC disk images specially built for this purpose.
Signed-off-by Joel Stanley <[email protected]>Signed-off-by Cédric Le Goater <[email protected]>--- include/hw/misc/aspeed_scu.h | 4 ++++ 1 file changed, 4 insertions(+)include/hw/misc/aspeed_scu.h +0
-0@@ -349,6 +349,10 @@ uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s);#define SCU_AST2600_H_PLL_BYPASS_EN (0x1 << 24)#define SCU_AST2600_H_PLL_OFF (0x1 << 23)
Quoted 5 lines
include/hw/misc/aspeed_scu.h uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s); · line 354
Quoted 3 lines
include/hw/misc/aspeed_scu.h +3
-0+/* STRAP1 SCU500 */ +#define AST2600_HW_STRAP_BOOT_SRC_EMMC (0x1 << 2) +#define AST2600_HW_STRAP_BOOT_SRC_SPI (0x0 << 2)Maybe these should have a
SCU_prefix for consistency?
Yep. I agree.
Quoted 4 lines
Anyway:
Reviewed-by Andrew Jeffery <[email protected]>
Thanks,
C.
PATCH 4/8 aspeed: Introduce a AspeedSoCClass 'boot_from_emmc' handler
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
Report support on the AST2600 SoC if the boot-from-eMMC HW strapping bit is set at the board level. AST2700 also has support but it is not yet ready in QEMU and others SoCs do not have support, so return false always for these.
--- include/hw/arm/aspeed_soc.h | 1 + hw/arm/aspeed_ast2600.c | 8 ++++++++ hw/arm/aspeed_soc_common.c | 7 +++++++ 3 files changed, 16 insertions(+)
include/hw/arm/aspeed_soc.h +1 -0
@@ -164,6 +164,7 @@ struct AspeedSoCClass {const hwaddr *memmap;uint32_t num_cpus;qemu_irq (*get_irq)(AspeedSoCState *s,int dev); +bool (*boot_from_emmc)(AspeedSoCState *s); };const char *aspeed_soc_cpu_type (AspeedSoCClass *sc);
hw/arm/aspeed_ast2600.c +8 -0
@@ -646,6 +646,13 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp) } } +static bool aspeed_soc_ast2600_boot_from_emmc (AspeedSoCState *s) +{ +uint32_t hw_strap1 =object_property_get_uint (OBJECT (&s->scu), +"hw-strap1" , &error_abort); +return !!(hw_strap1 &AST2600_HW_STRAP_BOOT_SRC_EMMC ); +} +static void aspeed_soc_ast2600_class_init (ObjectClass *oc,void *data) {static const char *const valid_cpu_types[] = {
@@ -673,6 +680,7 @@ static void aspeed_soc_ast2600_class_init(ObjectClass *oc, void *data) sc->memmap = aspeed_soc_ast2600_memmap; sc->num_cpus =2 ; sc->get_irq = aspeed_soc_ast2600_get_irq; + sc->boot_from_emmc = aspeed_soc_ast2600_boot_from_emmc; }static const TypeInfo aspeed_soc_ast2600_types[] = {
hw/arm/aspeed_soc_common.c +7 -0
@@ -134,6 +134,11 @@ static void aspeed_soc_realize(DeviceState *dev, Error **errp) } } +static bool aspeed_soc_boot_from_emmc (AspeedSoCState *s) +{ +return false; +} +static Property aspeed_soc_properties[] = {DEFINE_PROP_LINK ("dram" , AspeedSoCState, dram_mr,TYPE_MEMORY_REGION , MemoryRegion *),
@@ -145,9 +150,11 @@ static Property aspeed_soc_properties[] = {static void aspeed_soc_class_init (ObjectClass *oc,void *data) {DeviceClass *dc =DEVICE_CLASS (oc); +AspeedSoCClass *sc =ASPEED_SOC_CLASS (oc); dc->realize = aspeed_soc_realize;device_class_set_props (dc, aspeed_soc_properties); + sc->boot_from_emmc = aspeed_soc_boot_from_emmc; }static const TypeInfo aspeed_soc_types[] = {
Signature · 1 line
2.45.2
Re: [PATCH 4/8] aspeed: Introduce a AspeedSoCClass 'boot_from_emmc' handler
Quoted 8 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
Report support on the AST2600 SoC if the boot-from-eMMC HW strapping bit is set at the board level. AST2700 also has support but it is not yet ready in QEMU and others SoCs do not have support, so return false always for these.
Signed-off-by Cédric Le Goater <[email protected]>
PATCH 5/8 aspeed: Set eMMC 'boot-config' property to reflect HW strapping
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config' property to set the boot config register to boot from the first boot area partition of the eMMC device.
--- hw/arm/aspeed.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
hw/arm/aspeed.c +11 -4
@@ -327,7 +327,8 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc) +static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc, +bool boot_emmc) {DeviceState *card;
@@ -335,6 +336,9 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc)return ; } card =qdev_new (emmc ?TYPE_EMMC :TYPE_SD_CARD ); +if (emmc) { +qdev_prop_set_uint8 (card,"boot-config" , boot_emmc ?0x48 :0x0 ); + }qdev_prop_set_drive_err (card,"drive" ,blk_by_legacy_dinfo (dinfo), &error_fatal); qdev_realize_and_unref(card,
@@ -365,6 +369,7 @@ static void aspeed_machine_init(MachineState *machine)AspeedSoCClass *sc;int i;DriveInfo *emmc0 =NULL ; +bool boot_emmc; bmc->soc =ASPEED_SOC (object_new (amc->soc_name));object_property_add_child (OBJECT (machine),"soc" ,OBJECT (bmc->soc));
@@ -437,19 +442,21 @@ static void aspeed_machine_init(MachineState *machine)for (i =0 ; i < bmc->soc->sdhci.num_slots; i++) {sdhci_attach_drive (&bmc->soc->sdhci.slots[i], -drive_get (IF_SD ,0 , i), false); +drive_get (IF_SD ,0 , i), false, false); } + boot_emmc = sc->boot_from_emmc (bmc->soc); +if (bmc->soc->emmc.num_slots) { emmc0 =drive_get (IF_SD ,0 , bmc->soc->sdhci.num_slots); -sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], emmc0, true); +sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], emmc0, true, boot_emmc); }if (!bmc->mmio_exec) {DeviceState *dev =ssi_get_cs (bmc->soc->fmc.spi,0 );BlockBackend *fmc0 = dev ?m25p80_get_blk (dev) :NULL ; -if (fmc0) { +if (fmc0 && !boot_emmc) {uint64_t rom_size =memory_region_size (&bmc->soc->spi_boot);aspeed_install_boot_rom (bmc, fmc0, rom_size); }else if (emmc0) {
Signature · 1 line
2.45.2
Re: [PATCH 5/8] aspeed: Set eMMC 'boot-config' property to reflect HW strapping
Quoted 26 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config' property to set the boot config register to boot from the first boot area partition of the eMMC device.
Signed-off-by Cédric Le Goater <[email protected]>--- hw/arm/aspeed.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)hw/arm/aspeed.c +2
-1@@ -327,7 +327,8 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc) +static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc, +bool boot_emmc) {DeviceState *card;
hw/arm/aspeed.c static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) · line 340
Quoted 5 lines
hw/arm/aspeed.c +2
-0@@ -335,6 +336,9 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc)return ; } card =qdev_new (emmc ?TYPE_EMMC :TYPE_SD_CARD ); +if (emmc) { +qdev_prop_set_uint8 (card,"boot-config" , boot_emmc ?0x48 :0x0 );
0x48 feels a little bit magic. I poked around a bit and there are some boot-config macros, but not the ones you need and they're all in an "internal" header anyway. I guess this is fine for now?
Re: [PATCH 5/8] aspeed: Set eMMC 'boot-config' property to reflect HW strapping
Quoted 26 lines · Andrew Jeffery
Quoted 25 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config' property to set the boot config register to boot from the first boot area partition of the eMMC device.
Signed-off-by Cédric Le Goater <[email protected]>--- hw/arm/aspeed.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)hw/arm/aspeed.c +2
-1@@ -327,7 +327,8 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc) +static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc, +bool boot_emmc) {DeviceState *card;
Quoted 10 lines
hw/arm/aspeed.c static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) · line 340
Quoted 6 lines
hw/arm/aspeed.c +2
-0@@ -335,6 +336,9 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc)return ; } card =qdev_new (emmc ?TYPE_EMMC :TYPE_SD_CARD ); +if (emmc) { +qdev_prop_set_uint8 (card,"boot-config" , boot_emmc ?0x48 :0x0 );
0x48feels a little bit magic. I poked around a bit and there are some boot-config macros, but not the ones you need and they're all in an "internal" header anyway. I guess this is fine for now?
You are right and we should be using these :
hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG 179 /* R/W */
hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG_ACC_MASK (0x7) hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG_ACC_DEFAULT (0x0) hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG_ACC_BOOT0 (0x1) hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG_EN_MASK (0x7 << 3) hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG_EN_BOOT0 (0x1 << 3) hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG_EN_USER (0x7 << 3)
So I wonder where the 0x48 is coming from. Will change.
Quoted 2 lines
Reviewed-by Andrew Jeffery <[email protected]>
Thanks,
C.
Re: [PATCH 5/8] aspeed: Set eMMC 'boot-config' property to reflect HW strapping
Quoted 41 lines · Cédric Le Goater
Quoted 31 lines · Andrew Jeffery
Quoted 30 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config' property to set the boot config register to boot from the first boot area partition of the eMMC device.
Signed-off-by Cédric Le Goater <[email protected]>---
hw/arm/aspeed.c| 15 +++++++++++----1 file changed, 11 insertions(+), 4 deletions(-)hw/arm/aspeed.c +2
-1@@ -327,7 +327,8 @@ void aspeed_board_init_flashes(AspeedSMCState *s,const char *flashtype, } } -static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) +static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo,bool emmc, + bool boot_emmc) {DeviceState *card;
hw/arm/aspeed.c +0
-0@@ -335,6 +336,9 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) return; }Quoted 8 lines
hw/arm/aspeed.c static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc)
Quoted 4 lines
hw/arm/aspeed.c +2
-0card = qdev_new(emmc ? TYPE_EMMC : TYPE_SD_CARD); + if (emmc) { + qdev_prop_set_uint8(card, "boot-config", boot_emmc ?0x48 :0x0 );
0x48feels a little bit magic. I poked around a bit and there are some boot-config macros, but not the ones you need and they're all in an "internal" header anyway. I guess this is fine for now?
Quoted 3 lines
You are right and we should be using these :
hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG 179 /* R/W */
This field is R/W and expected to be configured by the guest.
Why the guest (u-boot) doesn't detect partitioning support?
See eMMC v4.5 section 7.4.60 PARTITIONING_SUPPORT [160] and earlier
For e•MMC 4.5 Devices, Bit 2-0 in PARTITIONING_SUPPORT shall be set to 1.
We don't set it so far.
I see in u-boot mmc_startup_v4():
/* store the partition info of emmc */
mmc->part_support = ext_csd[EXT_CSD_PARTITIONING_SUPPORT];
if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & PART_SUPPORT) ||
ext_csd[EXT_CSD_BOOT_MULT])
mmc->part_config = ext_csd[EXT_CSD_PART_CONF];
if (part_completed &&
(ext_csd[EXT_CSD_PARTITIONING_SUPPORT] & ENHNCD_SUPPORT))
mmc->part_attr = ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE];I'm still waiting for the eMMC prerequisite to be reviewed before looking at the eMMC patches in detail :/
Regards,
Phil.
Re: [PATCH 5/8] aspeed: Set eMMC 'boot-config' property to reflect HW strapping
Quoted 48 lines · Philippe Mathieu-Daudé
Quoted 41 lines · Cédric Le Goater
Quoted 31 lines · Andrew Jeffery
Quoted 30 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config' property to set the boot config register to boot from the first boot area partition of the eMMC device.
Signed-off-by Cédric Le Goater <[email protected]>---
hw/arm/aspeed.c| 15 +++++++++++----1 file changed, 11 insertions(+), 4 deletions(-)hw/arm/aspeed.c +2
-1@@ -327,7 +327,8 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo, bool emmc) +static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc, + bool boot_emmc) {DeviceState *card;
hw/arm/aspeed.c +0
-0@@ -335,6 +336,9 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) return; }Quoted 8 lines
hw/arm/aspeed.c static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc)
Quoted 4 lines
hw/arm/aspeed.c +2
-0card = qdev_new(emmc ? TYPE_EMMC : TYPE_SD_CARD); + if (emmc) { + qdev_prop_set_uint8(card, "boot-config", boot_emmc ?0x48 :0x0 );
0x48feels a little bit magic. I poked around a bit and there are some boot-config macros, but not the ones you need and they're all in an "internal" header anyway. I guess this is fine for now?Quoted 3 lines
You are right and we should be using these :
hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG 179 /* R/W */
This field is R/W and expected to be configured by the guest.
Quoted 8 lines
Why the guest (u-boot) doesn't detect partitioning support?
See eMMC v4.5 section 7.4.60
PARTITIONING_SUPPORT[160] and earlierFor e•MMC 4.5 Devices, Bit 2-0 in
PARTITIONING_SUPPORTshall be set to 1.We don't set it so far.
Sorry, I wasn't grepping in the correct branch, we do set it:
sd->ext_csd[EXT_CSD_PARTITION_SUPPORT] = 0x3;
I'll investigate.
Quoted 17 lines
I see in u-boot
mmc_startup_v4():/* store the partition info of emmc */
mmc->part_support= ext_csd[EXT_CSD_PARTITIONING_SUPPORT]; if ((ext_csd[EXT_CSD_PARTITIONING_SUPPORT] &PART_SUPPORT) || ext_csd[EXT_CSD_BOOT_MULT])
mmc->part_config= ext_csd[EXT_CSD_PART_CONF]; if (part_completed&& (ext_csd[EXT_CSD_PARTITIONING_SUPPORT] &ENHNCD_SUPPORT))mmc->part_attr= ext_csd[EXT_CSD_PARTITIONS_ATTRIBUTE];I'm still waiting for the eMMC prerequisite to be reviewed before looking at the eMMC patches in detail :/
Regards,
Phil.
Re: [PATCH 5/8] aspeed: Set eMMC 'boot-config' property to reflect HW strapping
Quoted 56 lines · Philippe Mathieu-Daudé
Quoted 55 lines · Philippe Mathieu-Daudé
Quoted 41 lines · Cédric Le Goater
Quoted 31 lines · Andrew Jeffery
Quoted 30 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config' property to set the boot config register to boot from the first boot area partition of the eMMC device.
Signed-off-by Cédric Le Goater <[email protected]>---
hw/arm/aspeed.c| 15 +++++++++++----1 file changed, 11 insertions(+), 4 deletions(-)hw/arm/aspeed.c +2
-1@@ -327,7 +327,8 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) +static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo,bool emmc, + bool boot_emmc) {DeviceState *card;
hw/arm/aspeed.c +0
-0@@ -335,6 +336,9 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) return; }Quoted 8 lines
hw/arm/aspeed.c static void sdhci_attach_drive(SDHCIState · line 342
Quoted 4 lines
hw/arm/aspeed.c +2
-0card = qdev_new(emmc ? TYPE_EMMC : TYPE_SD_CARD); + if (emmc) { + qdev_prop_set_uint8(card, "boot-config", boot_emmc ?0x48 :0x0 );
0x48feels a little bit magic. I poked around a bit and there are some boot-config macros, but not the ones you need and they're all in an "internal" header anyway. I guess this is fine for now?Quoted 3 lines
You are right and we should be using these :
hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG 179 /* R/W */
This field is R/W and expected to be configured by the guest.
Why the guest (u-boot) doesn't detect partitioning support?
See eMMC v4.5 section 7.4.60
PARTITIONING_SUPPORT[160] and earlierFor e•MMC 4.5 Devices, Bit 2-0 in
PARTITIONING_SUPPORTshall be set to 1.
Quoted 7 lines
Quoted 1 line
We don't set it so far.
Sorry, I wasn't grepping in the correct branch, we do set it:
sd->ext_csd[EXT_CSD_PARTITION_SUPPORT] =
0x3;I'll investigate.
Correct behavior implemented (I hope) here:
https://lore.kernel.org/qemu-devel/[email protected]/
Using it also simplifies this patch, we can squash:
-- >8 --
hw/arm/aspeed.c +5 -10
@@ -331,4 +331,3 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, -static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc, -bool boot_emmc) +static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc) {
@@ -341,4 +340,3 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc,if (emmc) { -qdev_prop_set_uint8 (card,"boot-config" , - boot_emmc ?EXT_CSD_PART_CONFIG_EN_BOOT0 :0x0 ); +qdev_prop_set_uint64 (card,"boot-size" ,1 * MiB); }
@@ -374,3 +372,2 @@ static void aspeed_machine_init(MachineState *machine)DriveInfo *emmc0 =NULL ; -bool boot_emmc;
@@ -447,10 +444,8 @@ static void aspeed_machine_init(MachineState *machine)sdhci_attach_drive (&bmc->soc->sdhci.slots[i], -drive_get (IF_SD ,0 , i), false, false); +drive_get (IF_SD ,0 , i), false); } - boot_emmc = sc->boot_from_emmc (bmc->soc); -if (bmc->soc->emmc.num_slots) { emmc0 =drive_get (IF_SD ,0 , bmc->soc->sdhci.num_slots); -sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], emmc0, true, boot_emmc); +sdhci_attach_drive (&bmc->soc->emmc.slots[0 ], emmc0, true); }
@@ -461,3 +456,3 @@ static void aspeed_machine_init(MachineState *machine) -if (fmc0 && !boot_emmc) { +if (fmc0 && !sc->boot_from_emmc (bmc->soc)) {uint64_t rom_size =memory_region_size (&bmc->soc->spi_boot);
---
IOW where we boot only affects the FMC, not (directly) the eMMC.
Regards,
Phil.
Re: [PATCH 5/8] aspeed: Set eMMC 'boot-config' property to reflect HW strapping
Quoted 56 lines · Philippe Mathieu-Daudé
Quoted 55 lines · Philippe Mathieu-Daudé
Quoted 43 lines · Philippe Mathieu-Daudé
Quoted 36 lines · Cédric Le Goater
Quoted 26 lines · Andrew Jeffery
Quoted 25 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config' property to set the boot config register to boot from the first boot area partition of the eMMC device.
Signed-off-by Cédric Le Goater <[email protected]>---
hw/arm/aspeed.c| 15 +++++++++++----1 file changed, 11 insertions(+), 4 deletions(-)hw/arm/aspeed.c +2
-1@@ -327,7 +327,8 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc) +static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc, + bool boot_emmc) { DeviceState *card;@@ -335,6 +336,9 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) return;Quoted 8 lines
hw/arm/aspeed.c static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) · line 340
Quoted 4 lines
hw/arm/aspeed.c +2
-0} card = qdev_new(emmc ? TYPE_EMMC : TYPE_SD_CARD); + if (emmc) { + qdev_prop_set_uint8(card, "boot-config", boot_emmc ? 0x48 : 0x0);
0x48feels a little bit magic. I poked around a bit and there are some boot-config macros, but not the ones you need and they're all in an "internal" header anyway. I guess this is fine for now?Quoted 3 lines
You are right and we should be using these :
hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG 179 /* R/W */
This field is R/W and expected to be configured by the guest.
Quoted 8 lines
Why the guest (u-boot) doesn't detect partitioning support?
See eMMC v4.5 section 7.4.60
PARTITIONING_SUPPORT[160] and earlierFor e•MMC 4.5 Devices, Bit 2-0 in
PARTITIONING_SUPPORTshall be set to 1.We don't set it so far.
Sorry, I wasn't grepping in the correct branch, we do set it:
Quoted 8 lines
Quoted 3 lines
sd->ext_csd[EXT_CSD_PARTITION_SUPPORT] =
0x3;I'll investigate.
Correct behavior implemented (I hope) here:
https://lore.kernel.org/qemu-devel/[email protected]/Using it also simplifies this patch, we can squash:
I think we need both "boot-size" and "boot-config" properties to set the associated registers, BOOT_CONFIG and BOOT_SIZE_MULT. BOOT_CONFIG defines which devices are enabled for boot (partition 1, 2 or user area) and BOOT_SIZE_MULT defines the size.
There is also a BOOT_INFO reg to define support for the alternate boot method but I don't think we care much today.
Thanks,
C.
Re: [PATCH 5/8] aspeed: Set eMMC 'boot-config' property to reflect HW strapping
Quoted 69 lines · Cédric Le Goater
Quoted 68 lines · Philippe Mathieu-Daudé
Quoted 56 lines · Philippe Mathieu-Daudé
Quoted 55 lines · Philippe Mathieu-Daudé
Quoted 41 lines · Cédric Le Goater
Quoted 31 lines · Andrew Jeffery
Quoted 30 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config' property to set the boot config register to boot from the first boot area partition of the eMMC device.
Signed-off-by Cédric Le Goater <[email protected]>---
hw/arm/aspeed.c| 15 +++++++++++----1 file changed, 11 insertions(+), 4 deletions(-)hw/arm/aspeed.c +2
-1@@ -327,7 +327,8 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) +static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo,bool emmc, + bool boot_emmc) {DeviceState *card;
hw/arm/aspeed.c +0
-0@@ -335,6 +336,9 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) return; }Quoted 8 lines
hw/arm/aspeed.c static void sdhci_attach_drive(SDHCIState · line 342
Quoted 4 lines
hw/arm/aspeed.c +2
-0card = qdev_new(emmc ? TYPE_EMMC : TYPE_SD_CARD); + if (emmc) { + qdev_prop_set_uint8(card, "boot-config", boot_emmc ?0x48 :0x0 );
0x48feels a little bit magic. I poked around a bit and there are some boot-config macros, but not the ones you need and they're all in an "internal" header anyway. I guess this is fine for now?Quoted 3 lines
You are right and we should be using these :
hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG 179 /* R/W */
This field is R/W and expected to be configured by the guest.
Why the guest (u-boot) doesn't detect partitioning support?
See eMMC v4.5 section 7.4.60
PARTITIONING_SUPPORT[160] and earlierFor e•MMC 4.5 Devices, Bit 2-0 in
PARTITIONING_SUPPORTshall be set to 1.Quoted 7 lines
Quoted 1 line
We don't set it so far.
Sorry, I wasn't grepping in the correct branch, we do set it:
sd->ext_csd[EXT_CSD_PARTITION_SUPPORT] =
0x3;I'll investigate.
Correct behavior implemented (I hope) here:
https://lore.kernel.org/qemu-devel/[email protected]/
Quoted 6 lines
Quoted 1 line
Using it also simplifies this patch, we can squash:
I think we need both "boot-size" and "boot-config" properties to set the associated registers,
BOOT_CONFIGandBOOT_SIZE_MULT.BOOT_CONFIGdefines which devices are enabled for boot (partition 1, 2 or user area) andBOOT_SIZE_MULTdefines the size.
I disagree: it is the guest responsibility to set the BOOT_CONFIG register (using the SWITCH command). Unlike the BOOT_CONFIG register which is in the (read-only) Properties Segment, the BOOT_SIZE_MULT is in the (read-write) Modes segment and its default value is 0x00.
See the Spec v4.3, chapter 8.4 "Extended CSD register":
The Extended CSD register defines the card properties and selected modes. It is 512 bytes long. The most significant 320 bytes are the Properties segment, which defines the card capabilities and cannot be modified by the host. The lower 192 bytes are the Modes segment, which defines the configuration the card is working in. These modes can be changed by the host by means of the SWITCH command.
For example in u-boot BOOT_CONFIG is set by mmc_set_part_conf():
/*
* Modify EXT_CSD[179] which is PARTITION_CONFIG (formerly
* BOOT_CONFIG) based on the passed in values for BOOT_ACK,
* BOOT_PARTITION_ENABLE and PARTITION_ACCESS.
*
* Returns 0 on success.
*/
int mmc_set_part_conf(struct mmc *mmc, u8 ack,
u8 part_num, u8 access)
{
int ret;
u8 part_conf;
part_conf = EXT_CSD_BOOT_ACK(ack) |
EXT_CSD_BOOT_PART_NUM(part_num) |
EXT_CSD_PARTITION_ACCESS(access);
ret = mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF,
part_conf);
if (!ret)
mmc->part_config = part_conf;
return ret;
}Quoted 2 lines
There is also a
BOOT_INFOreg to define support for the alternate boot method but I don't think we care much today.
BOOT_INFO is in the RO Properties segment. We can add a QOM property once we model the alternate boot mode (we don't so far).
Quoted 6 lines
Thanks,
C.
Re: [PATCH 5/8] aspeed: Set eMMC 'boot-config' property to reflect HW strapping
Quoted 67 lines · Philippe Mathieu-Daudé
Quoted 66 lines · Cédric Le Goater
Quoted 64 lines · Philippe Mathieu-Daudé
Quoted 51 lines · Philippe Mathieu-Daudé
Quoted 50 lines · Philippe Mathieu-Daudé
Quoted 36 lines · Cédric Le Goater
Quoted 26 lines · Andrew Jeffery
Quoted 25 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
When the boot-from-eMMC HW strapping bit is set, use the 'boot-config' property to set the boot config register to boot from the first boot area partition of the eMMC device.
Signed-off-by Cédric Le Goater <[email protected]>---
hw/arm/aspeed.c| 15 +++++++++++----1 file changed, 11 insertions(+), 4 deletions(-)hw/arm/aspeed.c +2
-1@@ -327,7 +327,8 @@ void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype, } } -static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc) +static void sdhci_attach_drive (SDHCIState *sdhci,DriveInfo *dinfo,bool emmc, + bool boot_emmc) { DeviceState *card;@@ -335,6 +336,9 @@ static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) return;Quoted 8 lines
hw/arm/aspeed.c static void sdhci_attach_drive(SDHCIState *sdhci, DriveInfo *dinfo, bool emmc) · line 340
Quoted 4 lines
hw/arm/aspeed.c +2
-0} card = qdev_new(emmc ? TYPE_EMMC : TYPE_SD_CARD); + if (emmc) { + qdev_prop_set_uint8(card, "boot-config", boot_emmc ? 0x48 : 0x0);
0x48feels a little bit magic. I poked around a bit and there are some boot-config macros, but not the ones you need and they're all in an "internal" header anyway. I guess this is fine for now?Quoted 3 lines
You are right and we should be using these :
hw/sd/sdmmc-internal.h:#define EXT_CSD_PART_CONFIG 179 /* R/W */
This field is R/W and expected to be configured by the guest.
Why the guest (u-boot) doesn't detect partitioning support?
See eMMC v4.5 section 7.4.60
PARTITIONING_SUPPORT[160] and earlierFor e•MMC 4.5 Devices, Bit 2-0 in
PARTITIONING_SUPPORTshall be set to 1.Quoted 7 lines
Quoted 1 line
We don't set it so far.
Sorry, I wasn't grepping in the correct branch, we do set it:
sd->ext_csd[EXT_CSD_PARTITION_SUPPORT] =
0x3;I'll investigate.
Correct behavior implemented (I hope) here:
https://lore.kernel.org/qemu-devel/[email protected]/Using it also simplifies this patch, we can squash:
Quoted 8 lines
Quoted 4 lines
I think we need both "boot-size" and "boot-config" properties to set the associated registers,
BOOT_CONFIGandBOOT_SIZE_MULT.BOOT_CONFIGdefines which devices are enabled for boot (partition 1, 2 or user area) andBOOT_SIZE_MULTdefines the size.I disagree: it is the guest responsibility to set the
BOOT_CONFIGregister (using the SWITCH command). Unlike theBOOT_CONFIGregister which is in the (read-only) Properties Segment,
hmm, in section 8.4 Extended CSD register, table 49 says BOOT_CONFIG is R/W.
Quoted 2 lines
the
BOOT_SIZE_MULT
is in the (read-write) Modes segment and its default value is0x00.
and BOOT_SIZE_MULTI is RO
Quoted 10 lines
See the Spec v4.3, chapter 8.4 "Extended CSD register":
The Extended CSD register defines the card properties and selected modes. It is 512 bytes long. The most significant 320 bytes are the Properties segment, which defines the card capabilities and cannot be modified by the host. The lower 192 bytes are the Modes segment, which defines the configuration the card is working in. These modes can be changed by the host by means of the SWITCH command.
yes and how is initial boot done ? You have start from eMMC at some point.
Quoted 20 lines
For example in u-boot
BOOT_CONFIGis set bymmc_set_part_conf():/*
* Modify EXT_CSD[179] which isPARTITION_CONFIG(formerly
*BOOT_CONFIG) based on the passed in values forBOOT_ACK,
*BOOT_PARTITION_ENABLEandPARTITION_ACCESS.
*
* Returns 0 on success.
*/
int mmc_set_part_conf(struct mmc *mmc, u8 ack,
u8part_num, u8 access)
{
int ret;
u8part_conf;
part_conf=EXT_CSD_BOOT_ACK(ack)|EXT_CSD_BOOT_PART_NUM(part_num)|EXT_CSD_PARTITION_ACCESS(access);
Quoted 7 lines
ret =
mmc_switch(mmc, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONF, part_conf);
if (!ret)
mmc->part_config=part_conf;return ret;
}
OK. It has been 5y since I last looked ! The part above is a u-boot command which means the board has already booted on some device (flash) and this command lets you boot from another device (eMMC)
I don't remember how exactly how this works on AST2600. I think the SoC secure boot controller sets the EXT_CSD config on the eMMC device and loads boot data in RAM. This is what the model is doing today when setting the boot config property and loading a ROM.
Anyhow, having two properties is not a big issue. It gives more flexibility to model the HW implementation of the boot part.
Thanks,
C.
PATCH 6/8 aspeed: Add boot-from-eMMC HW strapping bit to rainier-bmc machine
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
This value is taken from a running Rainier machine.
--- hw/arm/aspeed.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
hw/arm/aspeed.c +1 -1
@@ -189,7 +189,7 @@ struct AspeedMachineState {#define TACOMA_BMC_HW_STRAP2 0x00000040/* Rainier hardware value: (QEMU prototype) */ -#define RAINIER_BMC_HW_STRAP1 0x00422016 +#define RAINIER_BMC_HW_STRAP1 (0x00422016 | AST2600_HW_STRAP_BOOT_SRC_EMMC)#define RAINIER_BMC_HW_STRAP2 0x80000848/* Fuji hardware value */
Signature · 1 line
2.45.2
Re: [PATCH 6/8] aspeed: Add boot-from-eMMC HW strapping bit to rainier-bmc machine
Quoted 5 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
This value is taken from a running Rainier machine.
Signed-off-by Cédric Le Goater <[email protected]>
PATCH 7/8 aspeed: Introduce a 'hw_strap1' machine attribute
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
To change default behavior of a machine and boot from eMMC, future changes will add a machine option to let the user configure the boot-from-eMMC HW strapping bit. Add a new machine attribute first.
--- hw/arm/aspeed.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
hw/arm/aspeed.c +5 -1
@@ -46,6 +46,7 @@ struct AspeedMachineState {uint32_t uart_chosen;char *fmc_model;char *spi_model; +uint32_t hw_strap1; };/* On 32-bit hosts, lower RAM to 1G because of the 2047 MB limit */
@@ -391,7 +392,7 @@ static void aspeed_machine_init(MachineState *machine) } } -object_property_set_int (OBJECT (bmc->soc),"hw-strap1" , amc->hw_strap1, +object_property_set_int (OBJECT (bmc->soc),"hw-strap1" , bmc->hw_strap1, &error_abort);object_property_set_int (OBJECT (bmc->soc),"hw-strap2" , amc->hw_strap2, &error_abort);
@@ -1075,7 +1076,10 @@ static void aspeed_set_mmio_exec(Object *obj, bool value, Error **errp)static void aspeed_machine_instance_init (Object *obj) { +AspeedMachineClass *amc =ASPEED_MACHINE_GET_CLASS (obj); +ASPEED_MACHINE (obj)->mmio_exec = false; +ASPEED_MACHINE (obj)->hw_strap1 = amc->hw_strap1; }static char *aspeed_get_fmc_model (Object *obj,Error **errp)
Signature · 1 line
2.45.2
Re: [PATCH 7/8] aspeed: Introduce a 'hw_strap1' machine attribute
Quoted 7 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
To change default behavior of a machine and boot from eMMC, future changes will add a machine option to let the user configure the boot-from-eMMC HW strapping bit. Add a new machine attribute first.
Signed-off-by Cédric Le Goater <[email protected]>
PATCH 8/8 aspeed: Introduce a 'boot-emmc' machine option
In reply to Cédric Le GoaterFrom: Cédric Le Goater <[email protected]>
The default behavior of some Aspeed machines is to boot from the eMMC device, like the rainier-bmc. Others like ast2600-evb could also boot from eMMC if the HW strapping boot-from-eMMC bit was set. Add a property to set or unset this bit. This is useful to test boot images.
For now, only activate this property on the ast2600-evb and rainier-bmc machines for which eMMC images are available or can be built.
--- docs/system/arm/aspeed.rst | 2 ++ hw/arm/aspeed.c | 30 ++++++++++++++++++++++++++++++ 2 files changed, 32 insertions(+)
docs/system/arm/aspeed.rst +2 -0
@@ -123,6 +123,8 @@ To boot the machine from the flash image, use an MTD drive : Options specific to Aspeed machines are : + * ``boot-emmc`` to set or unset boot from eMMC (AST2600). + * ``execute-in-place`` which emulates the boot from the CE0 flash device by using the FMC controller to load the instructions, and not simply from RAM. This takes a little longer.
hw/arm/aspeed.c +30 -0
@@ -1176,6 +1176,34 @@ static void aspeed_machine_class_init_cpus_defaults(MachineClass *mc) mc->valid_cpu_types = sc->valid_cpu_types; } +static bool aspeed_machine_ast2600_get_boot_from_emmc (Object *obj,Error **errp) +{ +AspeedMachineState *bmc =ASPEED_MACHINE (obj); + +return !!(bmc->hw_strap1 &AST2600_HW_STRAP_BOOT_SRC_EMMC ); +} + +static void aspeed_machine_ast2600_set_boot_from_emmc (Object *obj,bool value, +Error **errp) +{ +AspeedMachineState *bmc =ASPEED_MACHINE (obj); + +if (value) { + bmc->hw_strap1 |=AST2600_HW_STRAP_BOOT_SRC_EMMC ; + }else { + bmc->hw_strap1 &= ~AST2600_HW_STRAP_BOOT_SRC_EMMC ; + } +} + +static void aspeed_machine_ast2600_class_emmc_init (ObjectClass *oc) +{ +object_class_property_add_bool (oc,"boot-emmc" , + aspeed_machine_ast2600_get_boot_from_emmc, + aspeed_machine_ast2600_set_boot_from_emmc); +object_class_property_set_description (oc,"boot-emmc" , +"Set or unset boot from EMMC" ); +} +static void aspeed_machine_class_init (ObjectClass *oc,void *data) {MachineClass *mc =MACHINE_CLASS (oc);
@@ -1375,6 +1403,7 @@ static void aspeed_machine_ast2600_evb_class_init(ObjectClass *oc, void *data) amc->i2c_init = ast2600_evb_i2c_init; mc->default_ram_size =1 * GiB;aspeed_machine_class_init_cpus_defaults (mc); +aspeed_machine_ast2600_class_emmc_init (oc); };static void aspeed_machine_tacoma_class_init (ObjectClass *oc,void *data)
@@ -1447,6 +1476,7 @@ static void aspeed_machine_rainier_class_init(ObjectClass *oc, void *data) amc->i2c_init = rainier_bmc_i2c_init; mc->default_ram_size =1 * GiB;aspeed_machine_class_init_cpus_defaults (mc); +aspeed_machine_ast2600_class_emmc_init (oc); };#define FUJI_BMC_RAM_SIZE ASPEED_RAM_SIZE(2 * GiB)
Signature · 1 line
2.45.2
Re: [PATCH 8/8] aspeed: Introduce a 'boot-emmc' machine option
Quoted 11 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
The default behavior of some Aspeed machines is to boot from the eMMC device, like the rainier-bmc. Others like ast2600-evb could also boot from eMMC if the HW strapping boot-from-eMMC bit was set. Add a property to set or unset this bit. This is useful to test boot images.
For now, only activate this property on the ast2600-evb and rainier-bmc machines for which eMMC images are available or can be built.
Signed-off-by Cédric Le Goater <[email protected]>
Quoted 14 lines · Cédric Le Goater
From: Cédric Le Goater <[email protected]>
Hello,
This series enables boot from eMMC on the rainier-bmc machine, which is the default behavior and also on the AST2600 EVB using a machine option to change the default.
It depends solely on the availability of an eMMC device model which is currently being discussed upstream. Numerous patches have been merged already and remaining ones [1] should be in 9.1 development cycle. Since the changes of this series are small and localized, it would be an interesting extension of the AST2600 SoC model for QEMU 9.1.
Quoted 8 lines
First 6 patches adjust the machine setup and HW strapping to boot from eMMC, the last 2 are for the AST2600 EVB and are optional.
Thanks,
C.
I built the series using the tree you linked above. It works well!
In that context: