hda intel - power save - need more help
I checked on these articles on powertop...i manually set it the value to 10 for *POWER_SAVE_DEFAULT but still don't see any power saving...
Has anyone tried this before and seen any power saving?
please help me with more clues...
Signature · 1 line
-Harsha
At Mon, 2 Jun 2008 12:15:06 +0530,
Quoted 3 lines · Harsha priya gupta
I checked on these articles on powertop...i manually set it the value to 10 for
*POWER_SAVE_DEFAULTbut still don't see any power saving...
Check whether it's really set to 10 in/sys/modules/snd_hda_intel/parameters/power_save.
Also, the power-save is turned on only when all analog loopback switches are off, e.g. Mic Playback Switch or Beep Playback Switch must be off. Otherwise the analog part must be powered on.
Takashi
I verified the value of /sys/modules/snd_hda_intel/parameters/power_save to be 10.
How can i ensure that the analog switches are off? Through Kmix?
Quoted 17 lines · Takashi Iwai
At Mon, 2 Jun 2008 12:15:06 +0530,
Quoted 2 lines · Harsha priya gupta
I checked on these articles on powertop...i manually set it the value to
10
Quoted 1 line
for
*POWER_SAVE_DEFAULTbut still don't see any power saving...Check whether it's really set to 10 in
/sys/modules/snd_hda_intel/parameters/power_save.Also, the power-save is turned on only when all analog loopback switches are off, e.g. Mic Playback Switch or Beep Playback Switch must be off. Otherwise the analog part must be powered on.
Takashi
Signature · 1 line
-Harsha
At Mon, 2 Jun 2008 15:07:49 +0530,
Quoted 5 lines · Harsha priya gupta
I verified the value of
/sys/modules/snd_hda_intel/parameters/power_saveto be 10.How can i ensure that the analog switches are off? Through Kmix?
Any sane mixer apps you like. But note that some mixer apps are buggy and don't show all mixer components.
Takashi
Quoted 23 lines · Takashi Iwai
At Mon, 2 Jun 2008 12:15:06 +0530,
Harsha priya gupta wrote:
>
> I checked on these articles on powertop...i manually set it the value to 10
> for*POWER_SAVE_DEFAULTbut still don't see any power saving...Check whether it's really set to 10 in
/sys/modules/snd_hda_intel/parameters/power_save.Also, the power-save is turned on only when all analog loopback switches are off, e.g. Mic Playback Switch or Beep Playback Switch must be off. Otherwise the analog part must be powered on.
Takashi
--
-Harsha
using the hildon desktop, there is just one control exposed of volume/mute. i muted that and still no luck. Any other idea that that i can try?
Quoted 40 lines · Takashi Iwai
At Mon, 2 Jun 2008 15:07:49 +0530,
Quoted 2 lines · Harsha priya gupta
I verified the value of
/sys/modules/snd_hda_intel/parameters/power_saveto be
Quoted 3 lines
10.
How can i ensure that the analog switches are off? Through Kmix?
Any sane mixer apps you like. But note that some mixer apps are buggy and don't show all mixer components.
Takashi
Quoted 7 lines · Takashi Iwai
At Mon, 2 Jun 2008 12:15:06 +0530,
Harsha priya gupta wrote:
>
> I checked on these articles on powertop...i manually set it thevalue to
Quoted 16 lines
10
> for*POWER_SAVE_DEFAULTbut still don't see any power saving...Check whether it's really set to 10 in
/sys/modules/snd_hda_intel/parameters/power_save.Also, the power-save is turned on only when all analog loopback switches are off, e.g. Mic Playback Switch or Beep Playback Switch must be off. Otherwise the analog part must be powered on.
Takashi
--
-Harsha
Signature · 1 line
-Harsha
At Mon, 2 Jun 2008 15:44:08 +0530,
Quoted 3 lines · Harsha priya gupta
using the hildon desktop, there is just one control exposed of volume/mute. i muted that and still no luck. Any other idea that that i can try?
Try standard programs in alsa-utils instead.
Takashi
Quoted 46 lines · Takashi Iwai
At Mon, 2 Jun 2008 15:07:49 +0530, Harsha priya gupta wrote: > > I verified the value of /sys/modules/snd_hda_intel/parameters/power_save to be > 10. > > How can i ensure that the analog switches are off? Through Kmix? Any sane mixer apps you like. But note that some mixer apps are buggy and don't show all mixer components. Takashi > > On Mon, Jun 2, 2008 at 1:01 PM, Takashi Iwai <[email protected]> wrote: > > At Mon, 2 Jun 2008 12:15:06 +0530, > Harsha priya gupta wrote: > > > > I checked on these articles on powertop...i manually set it the value to > 10 > > for *POWER_SAVE_DEFAULT but still don't see any power saving... > > Check whether it's really set to 10 in > /sys/modules/snd_hda_intel/parameters/power_save. > > Also, the power-save is turned on only when all analog loopback > switches are off, e.g. Mic Playback Switch or Beep Playback Switch > must be off. Otherwise the analog part must be powered on. > > Takashi > > -- > -Harsha > >--
-Harsha