Skip to contentSkip to conversation

hda intel - power save - need more help

DISCUSSION Harsha priya gupta 2 participants 6 messages Jun 2, 2008

lore
Share & tools
lore
#0 lore raw

I checked on these articles on powertop...i manually set it the value to 10 for *POWER_SAVE_DEFAULT but still don't see any power saving...

Has anyone tried this before and seen any power saving?

please help me with more clues...

Signature · 1 line
-Harsha
#1 lore raw

At Mon, 2 Jun 2008 12:15:06 +0530,

Quoted 3 lines · Harsha priya gupta

I checked on these articles on powertop...i manually set it the value to 10 for *POWER_SAVE_DEFAULT but still don't see any power saving...

Check whether it's really set to 10 in
/sys/modules/snd_hda_intel/parameters/power_save.

Also, the power-save is turned on only when all analog loopback switches are off, e.g. Mic Playback Switch or Beep Playback Switch must be off. Otherwise the analog part must be powered on.

Takashi

#2 lore raw

I verified the value of /sys/modules/snd_hda_intel/parameters/power_save to be 10.

How can i ensure that the analog switches are off? Through Kmix?

Quoted 17 lines · Takashi Iwai

At Mon, 2 Jun 2008 12:15:06 +0530,

Quoted 2 lines · Harsha priya gupta

I checked on these articles on powertop...i manually set it the value to

10

Quoted 1 line

for *POWER_SAVE_DEFAULT but still don't see any power saving...

Check whether it's really set to 10 in
/sys/modules/snd_hda_intel/parameters/power_save.

Also, the power-save is turned on only when all analog loopback switches are off, e.g. Mic Playback Switch or Beep Playback Switch must be off. Otherwise the analog part must be powered on.

Takashi

Signature · 1 line
-Harsha
#3 lore raw

At Mon, 2 Jun 2008 15:07:49 +0530,

Quoted 5 lines · Harsha priya gupta

I verified the value of /sys/modules/snd_hda_intel/parameters/power_save to be 10.

How can i ensure that the analog switches are off? Through Kmix?

Any sane mixer apps you like. But note that some mixer apps are buggy and don't show all mixer components.

Takashi

Quoted 23 lines · Takashi Iwai

At Mon, 2 Jun 2008 12:15:06 +0530,
Harsha priya gupta wrote:
>
> I checked on these articles on powertop...i manually set it the value to 10
> for *POWER_SAVE_DEFAULT but still don't see any power saving...

Check whether it's really set to 10 in /sys/modules/snd_hda_intel/parameters/power_save.

Also, the power-save is turned on only when all analog loopback switches are off, e.g. Mic Playback Switch or Beep Playback Switch must be off. Otherwise the analog part must be powered on.

Takashi

--
-Harsha

#4 lore raw

using the hildon desktop, there is just one control exposed of volume/mute. i muted that and still no luck. Any other idea that that i can try?

Quoted 40 lines · Takashi Iwai

At Mon, 2 Jun 2008 15:07:49 +0530,

Quoted 2 lines · Harsha priya gupta

I verified the value of /sys/modules/snd_hda_intel/parameters/power_save

to be

Quoted 3 lines

10.

How can i ensure that the analog switches are off? Through Kmix?

Any sane mixer apps you like. But note that some mixer apps are buggy and don't show all mixer components.

Takashi

Quoted 7 lines · Takashi Iwai

At Mon, 2 Jun 2008 12:15:06 +0530,
Harsha priya gupta wrote:
>
> I checked on these articles on powertop...i manually set it the

value to

Quoted 16 lines

10
> for *POWER_SAVE_DEFAULT but still don't see any power saving...

Check whether it's really set to 10 in /sys/modules/snd_hda_intel/parameters/power_save.

Also, the power-save is turned on only when all analog loopback switches are off, e.g. Mic Playback Switch or Beep Playback Switch must be off. Otherwise the analog part must be powered on.

Takashi

--
-Harsha

Signature · 1 line
-Harsha
#5 lore raw

At Mon, 2 Jun 2008 15:44:08 +0530,

Quoted 3 lines · Harsha priya gupta

using the hildon desktop, there is just one control exposed of volume/mute. i muted that and still no luck. Any other idea that that i can try?

Try standard programs in alsa-utils instead.

Takashi

Quoted 46 lines · Takashi Iwai
    At Mon, 2 Jun 2008 15:07:49 +0530,
    Harsha priya gupta wrote:
    >
    > I verified the value of /sys/modules/snd_hda_intel/parameters/power_save
    to be
    > 10.
    >
    > How can i ensure that the analog switches are off? Through Kmix?
   
    Any sane mixer apps you like.  But note that some mixer apps are buggy
    and don't show all mixer components.

    Takashi
   
    >
    > On Mon, Jun 2, 2008 at 1:01 PM, Takashi Iwai <[email protected]> wrote:
    >
    >     At Mon, 2 Jun 2008 12:15:06 +0530,
    >     Harsha priya gupta wrote:
    >     >
    >     > I checked on these articles on powertop...i manually set it the
    value to
    >     10
    >     > for *POWER_SAVE_DEFAULT but still don't see any power saving...
    >
    >     Check whether it's really set to 10 in
    >     /sys/modules/snd_hda_intel/parameters/power_save.
    >
    >     Also, the power-save is turned on only when all analog loopback
    >     switches are off, e.g. Mic Playback Switch or Beep Playback Switch
    >     must be off.  Otherwise the analog part must be powered on.
    >
    >     Takashi
    >
    > --
    > -Harsha
    >
    >

--
-Harsha