xawtv and v4lctl with usbvision kernel driver
Dear all,
Context:
debian/lenny with usb frame grabber:
Zoran Co. Personal Media Division (Nogatech) Hauppauge WinTV Pro (PAL/SECAM)
This uses the usbvision driver.
The problem is that while xawtv works OK with color, v4lctl ONLY shows the frames in black-and-white.
I understood that the usbvision driver needs some attention, e.g. a command like "v4lctl setinput 2" is not working, it will keep using setting 0. Because I need 2 (S-video) I patched the driver to always use 2 by setting channel=2 in "usbvision_muxsel" to permanently select that channel. With that usbvision module loaded I am getting pictures, but in BLACK_AND_WHITE, as mentioned.
When starting "xawtv", it works fine!
With a simple opencv application I do an
CvCapture* capture = cvCaptureFromCAM( cnum );
...
cam = (CvCaptureCAM_V4L*)capture;
...
ioctl(cam->deviceHandle,VIDIOC_G_FMT,&format))
...and find that the format is YV12, but the picture is black-and-white. But YV12 is a color format.
The question is, how to get proper color pictures when using v4lctl or other simple applications with this driver.
Thanks in advance,
Sietse Achterop
Quoted 29 lines · Sietse Achterop
Dear all,
Context:
debian/lenny with usb frame grabber:
Zoran Co. Personal Media Division (Nogatech) Hauppauge WinTV Pro (PAL/SECAM) This uses the usbvision driver.The problem is that while xawtv works OK with color, v4lctl ONLY shows the frames in black-and-white.
I understood that the usbvision driver needs some attention, e.g. a command like "v4lctl setinput 2" is not working, it will keep using setting 0. Because I need 2 (S-video) I patched the driver to always use 2 by setting channel=2 in "
usbvision_muxsel" to permanently select that channel. With that usbvision module loaded I am getting pictures, but inBLACK_AND_WHITE, as mentioned.When starting "xawtv", it works fine!
With a simple opencv application I do an
CvCapture* capture = cvCaptureFromCAM( cnum );
...
cam = (CvCaptureCAM_V4L*)capture;
...
ioctl(cam->deviceHandle,VIDIOC_G_FMT,&format))
...
and find that the format is YV12, but the picture is black-and-white. But YV12 is a color format.
Quoted 5 lines
The question is, how to get proper color pictures when using v4lctl or other simple applications with this driver.
Thanks in advance,
Sietse Achterop
I don't know about that board in particular, but on some boards the composite and s-video are actually wired together (sharing the luma line), so if you have the device configured in "composite" mode but have the s-video plugged in, then you will get a black/white image (since it expects to see both luma/chroma on the one pin that provides luma).
I had this issue on the HVR-950q.
Devin
Signature · 2 lines
Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com
Quoted 10 lines · Devin Heitmueller
Quoted 7 lines · Sietse Achterop
Context:
debian/lenny with usb frame grabber:
Zoran Co. Personal Media Division (Nogatech) Hauppauge WinTV Pro (PAL/SECAM)
This uses the usbvision driver.The problem is that while xawtv works OK with color, v4lctl ONLY shows the frames in black-and-white.
Quoted 6 lines
I don't know about that board in particular, but on some boards the composite and s-video are actually wired together (sharing the luma line), so if you have the device configured in "composite" mode but have the s-video plugged in, then you will get a black/white image (since it expects to see both luma/chroma on the one pin that provides luma).
Hi Devin,
Thanks for your reponse, but xawtv happely shows color, so I don't think
thats the issue,
Thanks again,
Sietse