Skip to contentSkip to conversation

xawtv and v4lctl with usbvision kernel driver

DISCUSSION Sietse Achterop 2 participants 3 messages Nov 16, 2009 – Nov 17, 2009 Media (V4L/DVB)

lore
Share & tools
lore
#0 lore raw

Dear all,

Context:
debian/lenny with usb frame grabber:
Zoran Co. Personal Media Division (Nogatech) Hauppauge WinTV Pro (PAL/SECAM)
This uses the usbvision driver.

The problem is that while xawtv works OK with color, v4lctl ONLY shows the frames in black-and-white.

I understood that the usbvision driver needs some attention, e.g. a command like "v4lctl setinput 2" is not working, it will keep using setting 0. Because I need 2 (S-video) I patched the driver to always use 2 by setting channel=2 in "usbvision_muxsel" to permanently select that channel. With that usbvision module loaded I am getting pictures, but in BLACK_AND_WHITE, as mentioned.

When starting "xawtv", it works fine!

With a simple opencv application I do an

	CvCapture* capture = cvCaptureFromCAM( cnum );
                 ...
	cam = (CvCaptureCAM_V4L*)capture;
                 ...
        ioctl(cam->deviceHandle,VIDIOC_G_FMT,&format))
                 ...

and find that the format is YV12, but the picture is black-and-white. But YV12 is a color format.

The question is, how to get proper color pictures when using v4lctl or other simple applications with this driver.

Thanks in advance,
Sietse Achterop

#1 lore raw
Quoted 29 lines · Sietse Achterop

   Dear all,

Context:
 debian/lenny with usb frame grabber:
    Zoran Co. Personal Media Division (Nogatech) Hauppauge WinTV Pro (PAL/SECAM) This uses the usbvision driver.

The problem is that while xawtv works OK with color, v4lctl ONLY shows the frames in black-and-white.

I understood that the usbvision driver needs some attention, e.g. a command like "v4lctl setinput 2" is not working, it will keep using setting 0. Because I need 2 (S-video) I patched the driver to always use 2 by setting channel=2 in "usbvision_muxsel" to permanently select that channel. With that usbvision module loaded I am getting pictures, but in BLACK_AND_WHITE, as mentioned.

When starting "xawtv", it works fine!

With a simple opencv application I do an
       CvCapture* capture = cvCaptureFromCAM( cnum );
                ...
       cam = (CvCaptureCAM_V4L*)capture;
                ...
       ioctl(cam->deviceHandle,VIDIOC_G_FMT,&format))
                ...
and find that the format is YV12, but the picture is black-and-white. But YV12 is a color format.

Quoted 5 lines

The question is, how to get proper color pictures when using v4lctl or other simple applications with this driver.

 Thanks in advance,
   Sietse Achterop

I don't know about that board in particular, but on some boards the composite and s-video are actually wired together (sharing the luma line), so if you have the device configured in "composite" mode but have the s-video plugged in, then you will get a black/white image (since it expects to see both luma/chroma on the one pin that provides luma).

I had this issue on the HVR-950q.

Devin

Signature · 2 lines
Devin J. Heitmueller - Kernel Labs
http://www.kernellabs.com
#2 lore raw
Quoted 10 lines · Devin Heitmueller
Quoted 7 lines · Sietse Achterop

Context:
debian/lenny with usb frame grabber:
Zoran Co. Personal Media Division (Nogatech) Hauppauge WinTV Pro (PAL/SECAM)
This uses the usbvision driver.

The problem is that while xawtv works OK with color, v4lctl ONLY shows the frames in black-and-white.

Quoted 6 lines

I don't know about that board in particular, but on some boards the composite and s-video are actually wired together (sharing the luma line), so if you have the device configured in "composite" mode but have the s-video plugged in, then you will get a black/white image (since it expects to see both luma/chroma on the one pin that provides luma).

Hi Devin,
Thanks for your reponse, but xawtv happely shows color, so I don't think
thats the issue,
Thanks again,
Sietse