package/rtl8723ds-bt: new package

index 3a0e3c14ab..b52a065dbc 100644
@@ -185,6 +185,7 @@ F:	package/qt5/qt5coap/
 F:	package/qt5/qt5knx/
 F:	package/qt5/qt5mqtt/
 F:	package/rtl8723ds/
+F:	package/rtl8723ds-bt/
 F:	package/sam-ba/
 F:	package/sshguard/
 F:	package/sunwait/

index 914c3584e9..999feae08a 100644
@@ -585,6 +585,7 @@ endmenu
 	source "package/rtl8192eu/Config.in"
 	source "package/rtl8723bu/Config.in"
 	source "package/rtl8723ds/Config.in"
+	source "package/rtl8723ds-bt/Config.in"
 	source "package/rtl8812au-aircrack-ng/Config.in"
 	source "package/rtl8821au/Config.in"
 	source "package/sane-backends/Config.in"

new file mode 100644
index 0000000000..0a604310c0
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_RTL8723DS_BT
+	bool "rtl8723ds-bt"
+	help
+	  rtl8723ds UART attached Bluetooth module firmware.
+
+	  https://github.com/wsyco/RTL8723DS_BT_Linux

new file mode 100644
index 0000000000..1ec4e350f9
@@ -0,0 +1,2 @@
+# Locally computed
+sha256  9e70a981946abeeb6437d9a27d8437cea15aa4df72f8d56ded0ae28af484d2f4  rtl8723ds-bt-14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08.tar.gz

new file mode 100644
index 0000000000..efd0a5bae9
@@ -0,0 +1,17 @@
+################################################################################
+#
+# rtl8723ds-bt
+#
+################################################################################
+
+RTL8723DS_BT_VERSION = 14cedf3a9fec1aa8c500fa52f3e3acc433cbcf08
+RTL8723DS_BT_SITE = $(call github,wsyco,RTL8723DS_BT_Linux,$(RTL8723DS_BT_VERSION))
+RTL8723DS_BT_LICENSE = PROPRIETARY
+
+define RTL8723DS_BT_INSTALL_TARGET_CMDS
+	mkdir -p $(TARGET_DIR)/lib/firmware/rtl_bt/
+	cp $(@D)/8723D/rtl8723d_fw $(TARGET_DIR)/lib/firmware/rtl_bt/rtl8723ds_fw.bin
+	cp $(@D)/8723D/rtl8723d_config $(TARGET_DIR)/lib/firmware/rtl_bt/rtl8723ds_config.bin
+endef
+
+$(eval $(generic-package))

index b52a065dbc..2f27ddb110 100644
@@ -157,6 +157,8 @@ N:	Andrey Yurovsky <[email protected]>
 F:	package/rauc/
 
 N:	Angelo Compagnucci <[email protected]>
+F:	board/sipeed/lichee_rv/
+F:	configs/sipeed_lichee_rv*
 F:	package/apparmor/
 F:	package/corkscrew/
 F:	package/cups/

new file mode 100644
index 0000000000..d5df41203d
@@ -0,0 +1,19 @@
+# Minimal SD card image for the sipeed Lichee RV
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = false
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		bootable = "true"
+		offset = 1M
+	}
+}

new file mode 100644
index 0000000000..91b2298628
@@ -0,0 +1,4 @@
+label linux
+  kernel /boot/Image
+  # use devicetree from u-boot
+  append console=ttyS0,115200 root=/dev/mmcblk0p1 ro rootwait

new file mode 100644
index 0000000000..24e8141851
@@ -0,0 +1,26 @@
+Lichee RV
+===============
+
+Lichee RV - Nezha CM is a compute module with modular design, equipped
+with Allwinner D1 chip (based on T-Head XuanTie C906 core), 512MB DDR3 RAM.
+It can boot from TF card or SD-NAND, uses two sets of M.2 b key 67 pin
+connectors to route all IO, making it convient for wide use and easy to replace.
+
+How to build
+============
+
+$ make sipeed_lichee_rv_defconfig
+$ make
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Connect a TTL UART to the debug connector, insert the microSD card and
+plug in a USB-C cable to the PWR connector to boot the system.

new file mode 100644
index 0000000000..f9782f870b
@@ -0,0 +1,33 @@
+BR2_riscv=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_0=y
+BR2_ROOTFS_OVERLAY="board/sipeed/lichee_rv/overlay"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/sipeed/lichee_rv/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,linux,ca67838d84af4c9f85d06311c9e98e1adf46308f)/linux-ca67838d84af4c9f85d06311c9e98e1adf46308f.tar.gz"
+BR2_LINUX_KERNEL_DEFCONFIG="nezha"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="allwinner/sun20i-d1-lichee-rv"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+# BR2_TARGET_ROOTFS_TAR is not set
+BR2_TARGET_OPENSBI=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION=y
+BR2_TARGET_OPENSBI_CUSTOM_VERSION_VALUE="1.1"
+BR2_TARGET_OPENSBI_PLAT="generic"
+# BR2_TARGET_OPENSBI_INSTALL_JUMP_IMG is not set
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
+BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,smaeul,u-boot,528ae9bc6c55edd3ffe642734b4132a8246ea777)/uboot-528ae9bc6c55edd3ffe642734b4132a8246ea777.tar.gz"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="lichee_rv_dock"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYLIBFDT=y
+BR2_TARGET_UBOOT_NEEDS_OPENSSL=y
+BR2_TARGET_UBOOT_NEEDS_OPENSBI=y
+# BR2_TARGET_UBOOT_FORMAT_BIN is not set
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-sunxi-with-spl.bin"
+BR2_PACKAGE_HOST_GENIMAGE=y

index 2f27ddb110..b0f10148b5 100644
@@ -158,6 +158,7 @@ F:	package/rauc/
 
 N:	Angelo Compagnucci <[email protected]>
 F:	board/sipeed/lichee_rv/
+F:	board/sipeed/lichee_rv_dock/
 F:	configs/sipeed_lichee_rv*
 F:	package/apparmor/
 F:	package/corkscrew/

new file mode 100644
index 0000000000..38078f0ae3
@@ -0,0 +1,19 @@
+# Minimal SD card image for the sipeed Lichee RV dock
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = false
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8K
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		bootable = "true"
+		offset = 1M
+	}
+}

new file mode 100644
index 0000000000..10016889ab
@@ -0,0 +1,7 @@
+CONFIG_BT=y
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_SERDEV=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_RTL=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y

new file mode 100644
index 0000000000..89e7d74aff
@@ -0,0 +1,6 @@
+auto lo
+iface lo inet loopback
+
+auto wlan0
+iface wlan0 inet dhcp
+wpa-conf /etc/wpa_supplicant.conf

new file mode 100644
index 0000000000..b43292b0a7
@@ -0,0 +1,8 @@
+ap_scan=1
+
+network={
+        ssid="YOURSSID"
+        scan_ssid=1
+        key_mgmt=WPA-PSK
+        psk="YOURPASSWD"
+}

45 lines not on this page · raw message

41 lines not on this page · raw message