Skip to contentSkip to conversation

board: Add Vyasa RK3288 board support

PATCH New Jagan Teki 4 participants 9 messages Jan 30, 2018 – Feb 6, 2018

lore
Share & tools
lore

Jagan Teki

author
#0 lore raw

PATCH v9 1/3 board: Add Vyasa RK3288 board support

Add Vyasa board, from rk3288 family SOC.

---
Changes for v9:
- Rebase on master
Changes for v8:
- Rebase on master
Changes for v7:
- Rebase on master
Changes for v6:
- None
Changes for v5:
- Add host-uboot-tools
- Fix commit message
- Drop Qt5 configs
Changes for v4:
- enable BR2_LINUX_KERNEL_INSTALL_TARGET
- enable BR2_TARGET_UBOOT_FORMAT_DTB_BINe
- Create single u-boot binary
- Use linux-4.12 along with same headers

 .gitlab-ci.yml                          |  1 +
 DEVELOPERS                              |  2 ++
 board/amarula/vyasa/extlinux.conf       |  4 +++
 board/amarula/vyasa/genimage.cfg        | 21 +++++++++++++++
 board/amarula/vyasa/linux_gmac.fragment |  3 +++
 board/amarula/vyasa/post-build.sh       |  9 +++++++
 board/amarula/vyasa/readme.txt          | 31 ++++++++++++++++++++++
 configs/amarula_vyasa_rk3288_defconfig  | 46 +++++++++++++++++++++++++++++++++
 8 files changed, 117 insertions(+)
 create mode 100644 board/amarula/vyasa/extlinux.conf
 create mode 100644 board/amarula/vyasa/genimage.cfg
 create mode 100644 board/amarula/vyasa/linux_gmac.fragment
 create mode 100755 board/amarula/vyasa/post-build.sh
 create mode 100644 board/amarula/vyasa/readme.txt
 create mode 100644 configs/amarula_vyasa_rk3288_defconfig
.gitlab-ci.yml +1 -0
index c816979..c824703 100644
@@ -66,6 +66,7 @@ acmesystems_aria_g25_128mb_defconfig: *defconfig
 acmesystems_aria_g25_256mb_defconfig: *defconfig
 acmesystems_arietta_g25_128mb_defconfig: *defconfig
 acmesystems_arietta_g25_256mb_defconfig: *defconfig
+amarula_vyasa_rk3288_defconfig: *defconfig
 arcturus_ucp1020_defconfig: *defconfig
 arm_foundationv8_defconfig: *defconfig
 arm_juno_defconfig: *defconfig
DEVELOPERS +2 -0
index b6cc7a0..dc9cf0d 100644
@@ -772,8 +772,10 @@ N:	Ismael Luceno <[email protected]>
 F:	package/axel/
 
 N:	Jagan Teki <[email protected]>
+F:	board/amarula/
 F:	board/bananapi/
 F:	board/engicam/
+F:	configs/amarula_vyasa_rk3288_defconfig
 F:	board/friendlyarm/nanopi-a64/
 F:	board/friendlyarm/nanopi-neo2/
 F:	board/olimex/a64-olinuxino/
board/amarula/vyasa/extlinux.conf new file +4 -0
new file mode 100644
index 0000000..a8fcc35
@@ -0,0 +1,4 @@
+label Vyasa linux-next
+  kernel /boot/uImage
+  devicetree /boot/rk3288-vyasa.dtb
+  append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait
board/amarula/vyasa/genimage.cfg new file +21 -0
new file mode 100644
index 0000000..fa41de3
@@ -0,0 +1,21 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot-tpl-spl-dtb {
+		in-partition-table = "no"
+		image = "u-boot-tpl-spl-dtb.img"
+		offset = 32K
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot-dtb.img"
+		offset = 8M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
board/amarula/vyasa/linux_gmac.fragment new file +3 -0
new file mode 100644
index 0000000..dd458c7
@@ -0,0 +1,3 @@
+# Currently kernel mainline exhibits issues when running rockchip gmac
+# on the board, so enable it as loadable module and insert it later
+CONFIG_DWMAC_ROCKCHIP=m
board/amarula/vyasa/post-build.sh new file +9 -0
new file mode 100755
index 0000000..ffbbcde
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
+cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/amarula/vyasa/readme.txt new file +31 -0
new file mode 100644
index 0000000..b95889e
@@ -0,0 +1,31 @@
+Vyasa RK3288
+============
+
+Vyasa is RK3288 based Single board computer with fully supported opensource software.
+
+https://openedev.amarulasolutions.com/display/ODWIKI/Vyasa+RK3288
+
+How to build it
+===============
+
+  $ make amarula_vyasa_rk3288_defconfig
+
+Then you can edit the build options using
+
+  $ make menuconfig
+
+Compile all and build rootfs image:
+
+  $ make
+
+Prepare your SDCard
+===================
+
+Buildroot generates a ready-to-use SD card image that you can flash directly to
+the card. The image will be in output/images/sdcard.img.
+You can write this image directly to an SD card device (i.e. /dev/xxx):
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/xxx
+  $ sudo sync
+
+Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it.
configs/amarula_vyasa_rk3288_defconfig new file +46 -0

46 lines not on this page · raw message

Signature · 1 line
1.9.1
author
#1 lore raw

PATCH v9 2/3 board: vyasa: Add qst5 configuration

This configuration build qt5 along with MALI T76X
for vyasa rk3288 board.

---
Changes for v9:
- Rebase on master
Changes for v8:
- Rebase on master
Changes for v7:
- Rebase on master
Changes for v6:
- Use custom git repo for linux
Changes for v5:
- New patch

 .gitlab-ci.yml                             |  1 +
 DEVELOPERS                                 |  1 +
 board/amarula/vyasa/readme.txt             | 19 ++++++++++
 configs/amarula_vyasa_rk3288_qt5_defconfig | 59 ++++++++++++++++++++++++++++++
 4 files changed, 80 insertions(+)
 create mode 100644 configs/amarula_vyasa_rk3288_qt5_defconfig
.gitlab-ci.yml +1 -0
index c824703..46b76c2 100644
@@ -67,6 +67,7 @@ acmesystems_aria_g25_256mb_defconfig: *defconfig
 acmesystems_arietta_g25_128mb_defconfig: *defconfig
 acmesystems_arietta_g25_256mb_defconfig: *defconfig
 amarula_vyasa_rk3288_defconfig: *defconfig
+amarula_vyasa_rk3288_qt5_defconfig: *defconfig
 arcturus_ucp1020_defconfig: *defconfig
 arm_foundationv8_defconfig: *defconfig
 arm_juno_defconfig: *defconfig
DEVELOPERS +1 -0
index dc9cf0d..5dcb8db 100644
@@ -776,6 +776,7 @@ F:	board/amarula/
 F:	board/bananapi/
 F:	board/engicam/
 F:	configs/amarula_vyasa_rk3288_defconfig
+F:	configs/amarula_vyasa_rk3288_qt5_defconfig
 F:	board/friendlyarm/nanopi-a64/
 F:	board/friendlyarm/nanopi-neo2/
 F:	board/olimex/a64-olinuxino/
board/amarula/vyasa/readme.txt +19 -0
index b95889e..167c594 100644
@@ -29,3 +29,22 @@ You can write this image directly to an SD card device (i.e. /dev/xxx):
   $ sudo sync
 
 Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it.
+
+Testing graphics on Vysa RK3288
+===============================
+
+Built Mali T76X, Qt5 and demo application:
+
+   $ make amarula_vyasa_rk3288_qt5_defconfig
+   $ make
+
+Test procedure:
+- insert require modules
+# modprobe -a rockchipdrm
+# modprobe -a governor_simpleondemand
+
+- build kernel mali driver as module and insert
+
+- run qt hellowindow
+# cd /usr/lib/qt/examples/opengl/
+# ./hellowindow/hellowindow
configs/amarula_vyasa_rk3288_qt5_defconfig new file +59 -0

59 lines not on this page · raw message

Signature · 1 line
1.9.1
#2 lore raw

PATCH v9 2/3 board: vyasa: Add qst5 configuration

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Jagan" == Jagan Teki <[email protected]> writes:

Hi,

Quoted 6 lines

This configuration build qt5 along with MALI T76X
for vyasa rk3288 board.

board/amarula/vyasa/readme.txt You can write this image directly to an SD card device (i.e. /dev/xxx): · line 36

Quoted 8 lines
board/amarula/vyasa/readme.txt +5 -0
@@ -29,3 +29,22 @@ You can write this image directly to an SD card device (i.e. /dev/xxx):
   $ sudo sync
 
 Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it.
+
+Testing graphics on Vysa RK3288
+===============================
+
+Built Mali T76X, Qt5 and demo application:

s/Built/Build/

board/amarula/vyasa/readme.txt You can write this image directly to an SD card device (i.e. /dev/xxx): · line 46

Quoted 10 lines
board/amarula/vyasa/readme.txt +10 -0
+
+   $ make amarula_vyasa_rk3288_qt5_defconfig
+   $ make
+
+Test procedure:
+- insert require modules
+# modprobe -a rockchipdrm
+# modprobe -a governor_simpleondemand
+
+- build kernel mali driver as module and insert

So this defconfig isn't usable out of the box? That isn't really nice :/

How about adding a t76x-mali kernel driver package, similar to E.G. sunxi-mali-driver-mainline:

https://patchwork.ozlabs.org/patch/841314/

Signature · 1 line
Bye, Peter Korsgaard
author
#3 lore raw

PATCH v9 3/3 board: Add Tinker RK3288 board support

In reply to Jagan Teki

Add Tinker board, from rk3288 family SOC.

---
Changes for v9:
- Rebase on master
Changes for v8:
- Rebase on master
Changes for v7:
- Rebase on master
Changes for v6:
- None
Changes for v5:
- Add host-uboot-tools
- Fix commit message
- Drop Qt5 configs
Changes for v4:
- enable BR2_LINUX_KERNEL_INSTALL_TARGET
- enable BR2_TARGET_UBOOT_FORMAT_DTB_BINe
- Create single u-boot binary
- Use linux-4.12 along with same headers

 .gitlab-ci.yml                       |  1 +
 DEVELOPERS                           |  2 ++
 board/asus/tinker/extlinux.conf      |  4 ++++
 board/asus/tinker/genimage.cfg       | 15 ++++++++++++
 board/asus/tinker/post-build.sh      |  9 ++++++++
 board/asus/tinker/readme.txt         | 37 +++++++++++++++++++++++++++++
 configs/asus_tinker_rk3288_defconfig | 45 ++++++++++++++++++++++++++++++++++++
 7 files changed, 113 insertions(+)
 create mode 100644 board/asus/tinker/extlinux.conf
 create mode 100644 board/asus/tinker/genimage.cfg
 create mode 100755 board/asus/tinker/post-build.sh
 create mode 100644 board/asus/tinker/readme.txt
 create mode 100644 configs/asus_tinker_rk3288_defconfig
.gitlab-ci.yml +1 -0
index 46b76c2..ffe0f67 100644
@@ -74,6 +74,7 @@ arm_juno_defconfig: *defconfig
 armadeus_apf27_defconfig: *defconfig
 armadeus_apf28_defconfig: *defconfig
 armadeus_apf51_defconfig: *defconfig
+asus_tinker_rk3288_defconfig: *defconfig
 at91sam9260eknf_defconfig: *defconfig
 at91sam9g20dfc_defconfig: *defconfig
 at91sam9g45m10ek_defconfig: *defconfig
DEVELOPERS +2 -0
index 5dcb8db..fcb52fa 100644
@@ -773,10 +773,12 @@ F:	package/axel/
 
 N:	Jagan Teki <[email protected]>
 F:	board/amarula/
+F:	board/asus/
 F:	board/bananapi/
 F:	board/engicam/
 F:	configs/amarula_vyasa_rk3288_defconfig
 F:	configs/amarula_vyasa_rk3288_qt5_defconfig
+F:	configs/asus_tinker_rk3288_defconfig
 F:	board/friendlyarm/nanopi-a64/
 F:	board/friendlyarm/nanopi-neo2/
 F:	board/olimex/a64-olinuxino/
board/asus/tinker/extlinux.conf new file +4 -0
new file mode 100644
index 0000000..136af0d
@@ -0,0 +1,4 @@
+label Tinker linux-next
+  kernel /boot/uImage
+  devicetree /boot/rk3288-tinker.dtb
+  append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait
board/asus/tinker/genimage.cfg new file +15 -0
new file mode 100644
index 0000000..a4b1e8d
@@ -0,0 +1,15 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot-spl-dtb {
+		in-partition-table = "no"
+		image = "u-boot-spl-dtb.img"
+		offset = 32K
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
board/asus/tinker/post-build.sh new file +9 -0
new file mode 100755
index 0000000..8108ed8
@@ -0,0 +1,9 @@
+#!/bin/sh
+
+MKIMAGE=$HOST_DIR/bin/mkimage
+BOARD_DIR="$(dirname $0)"
+
+$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-spl-dtb.bin $BINARIES_DIR/u-boot-spl-dtb.img
+cat $BINARIES_DIR/u-boot-dtb.bin >> $BINARIES_DIR/u-boot-spl-dtb.img
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
board/asus/tinker/readme.txt new file +37 -0
new file mode 100644
index 0000000..7372d29
@@ -0,0 +1,37 @@
+Tinker RK3288
+=============
+
+Tinker Board is a Single Board Computer (SBC) in an ultra-small form
+factor that offers class-leading performance while leveraging outstanding
+mechanical compatibility.
+
+Tinker link:
+https://www.asus.com/in/Single-Board-Computer/Tinker-Board/
+
+Wiki link:
+https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288
+
+How to build it
+===============
+
+  $ make asus_tinker_rk3288_defconfig
+
+Then you can edit the build options using
+
+  $ make menuconfig
+
+Compile all and build rootfs image:
+
+  $ make
+
+Prepare your SDCard
+===================
+
+Buildroot generates a ready-to-use SD card image that you can flash directly to
+the card. The image will be in output/images/sdcard.img.
+You can write this image directly to an SD card device (i.e. /dev/xxx):
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/xxx
+  $ sudo sync
+
+Finally, you can insert the SD card to the Tinker RK3288 board and boot it.
configs/asus_tinker_rk3288_defconfig new file +45 -0

45 lines not on this page · raw message

Signature · 1 line
1.9.1
#4 lore raw

PATCH v9 3/3 board: Add Tinker RK3288 board support

Quoted 14 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Jagan" == Jagan Teki <[email protected]> writes:

Add Tinker board, from rk3288 family SOC.

---
Changes for v9:
- Rebase on master
Changes for v8:
- Rebase on master
Changes for v7:
- Rebase on master
Changes for v6:
- None
Changes for v5:

Quoted 8 lines

- Add host-uboot-tools
- Fix commit message
- Drop Qt5 configs
Changes for v4:
- enable BR2_LINUX_KERNEL_INSTALL_TARGET
- enable BR2_TARGET_UBOOT_FORMAT_DTB_BINe
- Create single u-boot binary
- Use linux-4.12 along with same headers

Committed to next, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#5 lore raw

PATCH v9 1/3 board: Add Vyasa RK3288 board support

In reply to Jagan Teki
Quoted 22 lines · Jagan Teki

Add Vyasa board, from rk3288 family SOC.

---
Changes for v9:
- Rebase on master
Changes for v8:
- Rebase on master
Changes for v7:
- Rebase on master
Changes for v6:
- None
Changes for v5:
- Add host-uboot-tools
- Fix commit message
- Drop Qt5 configs
Changes for v4:
- enable BR2_LINUX_KERNEL_INSTALL_TARGET
- enable BR2_TARGET_UBOOT_FORMAT_DTB_BINe
- Create single u-boot binary
- Use linux-4.12 along with same headers

Quoted 15 lines
 .gitlab-ci.yml                          |  1 +
 DEVELOPERS                              |  2 ++
 board/amarula/vyasa/extlinux.conf       |  4 +++
 board/amarula/vyasa/genimage.cfg        | 21 +++++++++++++++
 board/amarula/vyasa/linux_gmac.fragment |  3 +++
 board/amarula/vyasa/post-build.sh       |  9 +++++++
 board/amarula/vyasa/readme.txt          | 31 ++++++++++++++++++++++
 configs/amarula_vyasa_rk3288_defconfig  | 46 +++++++++++++++++++++++++++++++++
 8 files changed, 117 insertions(+)
 create mode 100644 board/amarula/vyasa/extlinux.conf
 create mode 100644 board/amarula/vyasa/genimage.cfg
 create mode 100644 board/amarula/vyasa/linux_gmac.fragment
 create mode 100755 board/amarula/vyasa/post-build.sh
 create mode 100644 board/amarula/vyasa/readme.txt
 create mode 100644 configs/amarula_vyasa_rk3288_defconfig

These been in ML, since from couple months any chance to comment or picking up these.

thanks!

Signature · 4 lines
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.
#6 lore raw

PATCH v9 1/3 board: Add Vyasa RK3288 board support

Hello,

Quoted 8 lines · Jagan Teki
Quoted 8 lines

Changes for v9:
- Rebase on master
Changes for v8:
- Rebase on master
Changes for v7:
- Rebase on master
Changes for v6:
- None

Why do you resend like crazy, with no changes between the different iterations ?

Quoted 2 lines

These been in ML, since from couple months any chance to comment or picking up these.

There are 250+ patches pending in patchwork. If you want your patches to be reviewed faster, please help reviewing patches from others.

Best regards,

Thomas

Signature · 3 lines
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
#7 lore raw

PATCH v9 1/3 board: Add Vyasa RK3288 board support

Quoted 13 lines · Thomas Petazzoni

Hello,

Quoted 8 lines · Jagan Teki
Quoted 8 lines

Changes for v9:
- Rebase on master
Changes for v8:
- Rebase on master
Changes for v7:
- Rebase on master
Changes for v6:
- None

Quoted 2 lines

Why do you resend like crazy, with no changes between the different iterations ?

There were rebase changes in between.

Quoted 6 lines
Quoted 3 lines

These been in ML, since from couple months any chance to comment or picking up these.

There are 250+ patches pending in patchwork. If you want your patches to be reviewed faster, please help reviewing patches from others.

Yes, I already did few which I'm aware of., no idea what can do much more.

#8 lore raw

PATCH v9 1/3 board: Add Vyasa RK3288 board support

In reply to Jagan Teki

board/amarula/vyasa/linux_gmac.fragment line 3

Quoted 10 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Jagan" == Jagan Teki <[email protected]> writes:

Add Vyasa board, from rk3288 family SOC.

+++ b/board/amarula/vyasa/linux_gmac.fragment

board/amarula/vyasa/linux_gmac.fragment new file +3 -0
@@ -0,0 +1,3 @@
+# Currently kernel mainline exhibits issues when running rockchip gmac
+# on the board, so enable it as loadable module and insert it later
+CONFIG_DWMAC_ROCKCHIP=m

Here you talk about mainline, but:

configs/amarula_vyasa_rk3288_defconfig line 32

Quoted 9 lines
configs/amarula_vyasa_rk3288_defconfig new file +9 -0
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/openedev/linux-openedev"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d127129e85a020879f334154300ddd3f7ec21c1e"
+BR2_LINUX_KERNEL_DEFCONFIG="multi_v7"
+BR2_LINUX_KERNEL_UIMAGE=y
+BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x02000000"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-vyasa"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/amarula/vyasa/linux_gmac.fragment"

It isn't using mainline.

But OK - Committed to next, thanks.

Signature · 1 line
Bye, Peter Korsgaard