Skip to contentSkip to conversation

Revert "iproute: "list/flush/save default" selected all of the routes"

PATCH In review Stephen Hemminger 3 participants 22 messages Mar 12, 2018 – Mar 29, 2018

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Revert "iproute: "list/flush/save default" selected all of the routes"

This reverts commit 9135c4d6037ff9f1818507bac0049fc44db8c3d2.

Debian maintainer found that basic command:

	# ip route flush all
No longer worked as expected which breaks user scripts and
expectations. It no longer flushed all IPv4 routes.
---
 ip/iproute.c | 65 ++++++++++++++++++------------------------------------------
 lib/utils.c  | 13 ++++++++++++
 2 files changed, 32 insertions(+), 46 deletions(-)
ip/iproute.c +19 -46
index bf886fda9d76..32c93ed5abd9 100644
@@ -191,42 +191,20 @@ static int filter_nlmsg(struct nlmsghdr *n, struct rtattr **tb, int host_len)
 		return 0;
 	if ((filter.tos^r->rtm_tos)&filter.tosmask)
 		return 0;
-	if (filter.rdst.family) {
-		if (r->rtm_family != filter.rdst.family ||
-		    filter.rdst.bitlen > r->rtm_dst_len)
-			return 0;
-	} else if (filter.rdst.flags & PREFIXLEN_SPECIFIED) {
-		if (filter.rdst.bitlen > r->rtm_dst_len)
-			return 0;
-	}
-	if (filter.mdst.family) {
-		if (r->rtm_family != filter.mdst.family ||
-		    (filter.mdst.bitlen >= 0 &&
-		     filter.mdst.bitlen < r->rtm_dst_len))
-			return 0;
-	} else if (filter.mdst.flags & PREFIXLEN_SPECIFIED) {
-		if (filter.mdst.bitlen >= 0 &&
-		    filter.mdst.bitlen < r->rtm_dst_len)
-			return 0;
-	}
-	if (filter.rsrc.family) {
-		if (r->rtm_family != filter.rsrc.family ||
-		    filter.rsrc.bitlen > r->rtm_src_len)
-			return 0;
-	} else if (filter.rsrc.flags & PREFIXLEN_SPECIFIED) {
-		if (filter.rsrc.bitlen > r->rtm_src_len)
-			return 0;
-	}
-	if (filter.msrc.family) {
-		if (r->rtm_family != filter.msrc.family ||
-		    (filter.msrc.bitlen >= 0 &&
-		     filter.msrc.bitlen < r->rtm_src_len))
-			return 0;
-	} else if (filter.msrc.flags & PREFIXLEN_SPECIFIED) {
-		if (filter.msrc.bitlen >= 0 &&
-		    filter.msrc.bitlen < r->rtm_src_len)
-			return 0;
-	}
+	if (filter.rdst.family &&
+	    (r->rtm_family != filter.rdst.family || filter.rdst.bitlen > r->rtm_dst_len))
+		return 0;
+	if (filter.mdst.family &&
+	    (r->rtm_family != filter.mdst.family ||
+	     (filter.mdst.bitlen >= 0 && filter.mdst.bitlen < r->rtm_dst_len)))
+		return 0;
+	if (filter.rsrc.family &&
+	    (r->rtm_family != filter.rsrc.family || filter.rsrc.bitlen > r->rtm_src_len))
+		return 0;
+	if (filter.msrc.family &&
+	    (r->rtm_family != filter.msrc.family ||
+	     (filter.msrc.bitlen >= 0 && filter.msrc.bitlen < r->rtm_src_len)))
+		return 0;
 	if (filter.rvia.family) {
 		int family = r->rtm_family;
 
@@ -243,9 +221,7 @@ static int filter_nlmsg(struct nlmsghdr *n, struct rtattr **tb, int host_len)
 
 	if (tb[RTA_DST])
 		memcpy(&dst.data, RTA_DATA(tb[RTA_DST]), (r->rtm_dst_len+7)/8);
-	if (filter.rsrc.family || filter.msrc.family ||
-	    filter.rsrc.flags & PREFIXLEN_SPECIFIED ||
-	    filter.msrc.flags & PREFIXLEN_SPECIFIED) {
+	if (filter.rsrc.family || filter.msrc.family) {
 		if (tb[RTA_SRC])
 			memcpy(&src.data, RTA_DATA(tb[RTA_SRC]), (r->rtm_src_len+7)/8);
 	}
@@ -265,18 +241,15 @@ static int filter_nlmsg(struct nlmsghdr *n, struct rtattr **tb, int host_len)
 			memcpy(&prefsrc.data, RTA_DATA(tb[RTA_PREFSRC]), host_len/8);
 	}
 
-	if ((filter.rdst.family || filter.rdst.flags & PREFIXLEN_SPECIFIED) &&
-	    inet_addr_match(&dst, &filter.rdst, filter.rdst.bitlen))
+	if (filter.rdst.family && inet_addr_match(&dst, &filter.rdst, filter.rdst.bitlen))
 		return 0;
-	if ((filter.mdst.family || filter.mdst.flags & PREFIXLEN_SPECIFIED) &&
+	if (filter.mdst.family && filter.mdst.bitlen >= 0 &&
 	    inet_addr_match(&dst, &filter.mdst, r->rtm_dst_len))
 		return 0;
 
-	if ((filter.rsrc.family || filter.rsrc.flags & PREFIXLEN_SPECIFIED) &&
-	    inet_addr_match(&src, &filter.rsrc, filter.rsrc.bitlen))
+	if (filter.rsrc.family && inet_addr_match(&src, &filter.rsrc, filter.rsrc.bitlen))
 		return 0;
-	if ((filter.msrc.family || filter.msrc.flags & PREFIXLEN_SPECIFIED) &&
-	    filter.msrc.bitlen >= 0 &&
+	if (filter.msrc.family && filter.msrc.bitlen >= 0 &&
 	    inet_addr_match(&src, &filter.msrc, r->rtm_src_len))
 		return 0;
 
lib/utils.c +13 -0
index 379739d61246..87b609f2a6bc 100644
@@ -681,6 +681,19 @@ int get_prefix_1(inet_prefix *dst, char *arg, int family)
 	char *slash;
 	int err, bitlen, flags;
 
+	memset(dst, 0, sizeof(*dst));
+
+	if (strcmp(arg, "default") == 0 ||
+	    strcmp(arg, "any") == 0 ||
+	    strcmp(arg, "all") == 0) {
+		if ((family == AF_DECnet) || (family == AF_MPLS))
+			return -1;
+		dst->family = family;
+		dst->bytelen = 0;
+		dst->bitlen = 0;
+		return 0;
+	}
+
 	slash = strchr(arg, '/');
 	if (slash)
 		*slash = 0;
Signature · 1 line
2.16.1
Tested-by on v1 1/1
#1 lore raw
Quoted 7 lines · Stephen Hemminger

This reverts commit 9135c4d6037ff9f1818507bac0049fc44db8c3d2.

Debian maintainer found that basic command:

	# ip route flush all
No longer worked as expected which breaks user scripts and
expectations. It no longer flushed all IPv4 routes.
Quoted 7 lines

---
 ip/iproute.c | 65 ++++++++++++++++++------------------------------
------------
 lib/utils.c  | 13 ++++++++++++

 2 files changed, 32 insertions(+), 46 deletions(-)

Thanks, solves the problem. I'll backport it to Debian.

Alexander, reproducing the issue is quite simple - before that commit, ip route ls all showed all routes, but with the change it started showing only the default table. Same for ip route flush.

Signature · 2 lines
Kind regards,
Luca Boccassi
#2 lore raw

Hello.

May be the better way would be to change how "all"/"any" argument behaves? My original concern was about "default" only. I agree too, that "all" or "any" should work for all routes. But not for the default.

12.03.2018, 22:37, "Luca Boccassi" <[email protected]>:

Quoted 27 lines · Stephen Hemminger
Quoted 7 lines

 This reverts commit 9135c4d6037ff9f1818507bac0049fc44db8c3d2.

 Debian maintainer found that basic command:

         # ip route flush all
 No longer worked as expected which breaks user scripts and
 expectations. It no longer flushed all IPv4 routes.
Quoted 7 lines

 ---
  ip/iproute.c | 65 ++++++++++++++++++------------------------------
 ------------
  lib/utils.c  | 13 ++++++++++++

  2 files changed, 32 insertions(+), 46 deletions(-)

Thanks, solves the problem. I'll backport it to Debian.

Alexander, reproducing the issue is quite simple - before that commit, ip route ls all showed all routes, but with the change it started showing only the default table. Same for ip route flush.

--
Kind regards,
Luca Boccassi

#3 lore raw

Hello again,

The fun thing is that before the commit "ip route ls all" showed all routes, but "ip -[4|6] route ls all" showed only default. So it was broken too, but in other way.
I see parsing of prefix was changed since my patch. So I need several days to propose fix. I think if "ip route ls [all|any]" shows all routes and "ip route ls default" shows only default, everybody will be happy with that?

13.03.2018, 09:46, "Alexander Zubkov" <[email protected]>:

Quoted 32 lines

Hello.

May be the better way would be to change how "all"/"any" argument behaves? My original concern was about "default" only. I agree too, that "all" or "any" should work for all routes. But not for the default.

12.03.2018, 22:37, "Luca Boccassi" <[email protected]>:

Quoted 27 lines · Stephen Hemminger
Quoted 7 lines

  This reverts commit 9135c4d6037ff9f1818507bac0049fc44db8c3d2.

  Debian maintainer found that basic command:

          # ip route flush all
  No longer worked as expected which breaks user scripts and
  expectations. It no longer flushed all IPv4 routes.
Quoted 7 lines

  ---
   ip/iproute.c | 65 ++++++++++++++++++------------------------------
  ------------
   lib/utils.c  | 13 ++++++++++++

   2 files changed, 32 insertions(+), 46 deletions(-)

 Thanks, solves the problem. I'll backport it to Debian.

 Alexander, reproducing the issue is quite simple - before that commit, ip route ls all showed all routes, but with the change it started showing only the default table. Same for ip route flush.

 --
 Kind regards,
 Luca Boccassi

#4 lore raw
Quoted 9 lines · Alexander Zubkov

Hello again,

The fun thing is that before the commit "ip route ls all" showed all routes, but "ip -[4|6] route ls all" showed only default. So it was broken too, but in other way.
I see parsing of prefix was changed since my patch. So I need several days to propose fix. I think if "ip route ls [all|any]" shows all routes and "ip route ls default" shows only default, everybody will be happy with that?

Hi,

My only concern is that behaviour of existing commands that have been in releases is not changed, otherwise I get bugs raised :-)

Thank you for your work!

Quoted 39 lines

13.03.2018, 09:46, "Alexander Zubkov" <[email protected]>:

Quoted 38 lines

Hello.

May be the better way would be to change how "all"/"any" argument behaves? My original concern was about "default" only. I agree too, that "all" or "any" should work for all routes. But not for the default.

12.03.2018, 22:37, "Luca Boccassi" <[email protected]>:

Quoted 30 lines · Stephen Hemminger
Quoted 7 lines

  This reverts commit 9135c4d6037ff9f1818507bac0049fc44db8c3d2.

  Debian maintainer found that basic command:

          # ip route flush all
  No longer worked as expected which breaks user scripts and
  expectations. It no longer flushed all IPv4 routes.
Quoted 8 lines

  ---
   ip/iproute.c | 65 ++++++++++++++++++----------------------
--------
  ------------
   lib/utils.c  | 13 ++++++++++++

   2 files changed, 32 insertions(+), 46 deletions(-)

 Thanks, solves the problem. I'll backport it to Debian.

 Alexander, reproducing the issue is quite simple - before that commit,
 ip route ls all showed all routes, but with the change it started
 showing only the default table. Same for ip route flush.

 --
 Kind regards,
 Luca Boccassi

Signature · 2 lines
Kind regards,
Luca Boccassi
#5 lore raw

Hi,

I just realized that you need patch for v4.15.0, which is easier to do. I'll send it as separate message now. I will make patch for the master branch, but later.

Quoted 58 lines · Luca Boccassi
Quoted 9 lines · Alexander Zubkov

Hello again,

The fun thing is that before the commit "ip route ls all" showed all routes, but "ip -[4|6] route ls all" showed only default. So it was broken too, but in other way.
I see parsing of prefix was changed since my patch. So I need several days to propose fix. I think if "ip route ls [all|any]" shows all routes and "ip route ls default" shows only default, everybody will be happy with that?

Hi,

My only concern is that behaviour of existing commands that have been in releases is not changed, otherwise I get bugs raised :-)

Thank you for your work!

Quoted 39 lines

13.03.2018, 09:46, "Alexander Zubkov" <[email protected]>:

Quoted 38 lines

Hello.

May be the better way would be to change how "all"/"any" argument behaves? My original concern was about "default" only. I agree too, that "all" or "any" should work for all routes. But not for the default.

12.03.2018, 22:37, "Luca Boccassi" <[email protected]>:

Quoted 30 lines · Stephen Hemminger
Quoted 7 lines

  This reverts commit 9135c4d6037ff9f1818507bac0049fc44db8c3d2.

  Debian maintainer found that basic command:

           # ip route flush all
   No longer worked as expected which breaks user scripts and
   expectations. It no longer flushed all IPv4 routes.
Quoted 8 lines

  ---

    ip/iproute.c | 65 ++++++++++++++++++----------------------
--------
   ------------
    lib/utils.c  | 13 ++++++++++++
    2 files changed, 32 insertions(+), 46 deletions(-)

 Thanks, solves the problem. I'll backport it to Debian.

 Alexander, reproducing the issue is quite simple - before that
commit,
 ip route ls all showed all routes, but with the change it
started
 showing only the default table. Same for ip route flush.

 --
 Kind regards,
 Luca Boccassi

#6 lore raw
Quoted 7 lines · Alexander Zubkov

Hi,

I just realized that you need patch for v4.15.0, which is easier to do.
I'll send it as separate message now. I will make patch for the master
branch, but later.

Thanks but don't worry about 4.15 - Stephen's revert will be enough for now. I'm going to push 4.16 as soon as it's out anyway, so you can just do the changes for master if you wish.

Quoted 72 lines · Luca Boccassi
Quoted 69 lines · Alexander Zubkov
Quoted 13 lines

Hello again,

The fun thing is that before the commit "ip route ls all" showed all
routes, but "ip -[4|6] route ls all" showed only default. So it was
broken too, but in other way.
I see parsing of prefix was changed since my patch. So I need several
days to propose fix. I think if "ip route ls [all|any]" shows all routes and "ip route ls default" shows only default, everybody will
be happy with that?

Hi,

My only concern is that behaviour of existing commands that have been
in releases is not changed, otherwise I get bugs raised :-)

Thank you for your work!

Quoted 46 lines

13.03.2018, 09:46, "Alexander Zubkov" <[email protected]>:

Quoted 45 lines

Hello.

May be the better way would be to change how "all"/"any" argument
behaves? My original concern was about "default" only. I agree too,
that "all" or "any" should work for all routes. But not for the default.

12.03.2018, 22:37, "Luca Boccassi" <[email protected]>:

Quoted 35 lines · Stephen Hemminger
Quoted 11 lines

   This reverts commit
9135c4d6037ff9f1818507bac0049fc44db8c3d2.

   Debian maintainer found that basic command:

           # ip route flush all
   No longer worked as expected which breaks user scripts
and
   expectations. It no longer flushed all IPv4 routes.
Quoted 8 lines

.org>
   ---
    ip/iproute.c | 65 ++++++++++++++++++-------------------
---
--------
   ------------
    lib/utils.c  | 13 ++++++++++++

    2 files changed, 32 insertions(+), 46 deletions(-)

  Thanks, solves the problem. I'll backport it to Debian.

  Alexander, reproducing the issue is quite simple - before that
commit,
  ip route ls all showed all routes, but with the change it started
  showing only the default table. Same for ip route flush.

  --
  Kind regards,
  Luca Boccassi

Signature · 2 lines
Kind regards,
Luca Boccassi
#7 lore raw
In reply to Alexander Zubkov

Hello,

There was a series of patches by Serhey and specifically this one:
https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/commit/?id=93fa12418dc6f5943692250244be303bb162175b

It drops handling of special prefix names in get_prefix_1(), and in get_addr_1() they always receive family and bytelen. But as I unerstand for any case it was important to keep it with unspecified family for further filtering. As I do not know what is the global idea, I want to discuss it. Because there are options depending on how and where we want to handle those special names. Like keep unspecified family or change filtering logic.

I have added Serhey Popovych in the recepients, so he can give some ideas on what his aim is and help choose better solution.

13.03.2018, 21:12, "Alexander Zubkov" <[email protected]>:

Quoted 64 lines

Hi,

I just realized that you need patch for v4.15.0, which is easier to do. I'll send it as separate message now. I will make patch for the master branch, but later.

Quoted 57 lines · Luca Boccassi
Quoted 9 lines · Alexander Zubkov

 Hello again,

 The fun thing is that before the commit "ip route ls all" showed all routes, but "ip -[4|6] route ls all" showed only default. So it was broken too, but in other way.
 I see parsing of prefix was changed since my patch. So I need several days to propose fix. I think if "ip route ls [all|any]" shows all routes and "ip route ls default" shows only default, everybody will be happy with that?

 Hi,

 My only concern is that behaviour of existing commands that have been in releases is not changed, otherwise I get bugs raised :-)

 Thank you for your work!

Quoted 39 lines

 13.03.2018, 09:46, "Alexander Zubkov" <[email protected]>:

Quoted 38 lines

 Hello.

 May be the better way would be to change how "all"/"any" argument behaves? My original concern was about "default" only. I agree too, that "all" or "any" should work for all routes. But not for the default.

 12.03.2018, 22:37, "Luca Boccassi" <[email protected]>:

Quoted 30 lines · Stephen Hemminger
Quoted 7 lines

    This reverts commit 9135c4d6037ff9f1818507bac0049fc44db8c3d2.

    Debian maintainer found that basic command:

            # ip route flush all
    No longer worked as expected which breaks user scripts and
    expectations. It no longer flushed all IPv4 routes.
Quoted 8 lines

    ---
     ip/iproute.c | 65 ++++++++++++++++++----------------------
 --------
    ------------
     lib/utils.c  | 13 ++++++++++++

     2 files changed, 32 insertions(+), 46 deletions(-)

   Thanks, solves the problem. I'll backport it to Debian.

   Alexander, reproducing the issue is quite simple - before that commit,
   ip route ls all showed all routes, but with the change it started
   showing only the default table. Same for ip route flush.

   --
   Kind regards,
   Luca Boccassi

#8 lore raw

Hello,

For example, it can be fixed in such way (patch is below):
- split handling of default and all/any
- set needed attributes in get_addr: PREFIXLEN_SPECIFIED flag for default
- and AF_UNSPEC for all/any
In this case "ip route show default" shows only default route and "ip route show all" shows all routes. And both also work when family (-4 or -6) is specified.
Serhey, does it goes in line with what you wanted to achieve? Because I do not know - may be there are reasons why all/any should be provided with specific family. If you think this solution is suitable, I'll do some additional tests and package the patch in a proper way for this mailing list. And I'm unsure if check for AF_DECnet and AF_MPLS should be kept in both branches. May be someone have some additional thoughts on that?

lib/utils.c +14 -6
@@ -560,14 +560,23 @@ static int __get_addr_1(inet_prefix *addr, const char *name, int family)
 {
 	memset(addr, 0, sizeof(*addr));
 
-	if (strcmp(name, "default") == 0 ||
-	    strcmp(name, "all") == 0 ||
-	    strcmp(name, "any") == 0) {
+	if (strcmp(name, "default") == 0) {
 		if ((family == AF_DECnet) || (family == AF_MPLS))
 			return -1;
 		addr->family = (family != AF_UNSPEC) ? family : AF_INET;
 		addr->bytelen = af_byte_len(addr->family);
 		addr->bitlen = -2;
+		addr->flags |= PREFIXLEN_SPECIFIED;
+		return 0;
+	}
+
+	if (strcmp(name, "all") == 0 ||
+	    strcmp(name, "any") == 0) {
+		if ((family == AF_DECnet) || (family == AF_MPLS))
+			return -1;
+		addr->family = AF_UNSPEC;
+		addr->bytelen = 0;
+		addr->bitlen = -2;
 		return 0;
 	}
 
@@ -695,7 +704,7 @@ int get_prefix_1(inet_prefix *dst, char *arg, int family)
 
 	bitlen = af_bit_len(dst->family);
 
-	flags = PREFIXLEN_SPECIFIED;
+	flags = 0;
 	if (slash) {
 		unsigned int plen;
 
@@ -706,12 +715,11 @@ int get_prefix_1(inet_prefix *dst, char *arg, int family)
 		if (plen > bitlen)
 			return -1;
 
+		flags |= PREFIXLEN_SPECIFIED;
 		bitlen = plen;
 	} else {
 		if (dst->bitlen == -2)
 			bitlen = 0;
-		else
-			flags = 0;
 	}
 
 	dst->flags |= flags;
Quoted 74 lines · Alexander Zubkov

Hello,

There was a series of patches by Serhey and specifically this one:
https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/commit/?id=93fa12418dc6f5943692250244be303bb162175b

It drops handling of special prefix names in get_prefix_1(), and in get_addr_1() they always receive family and bytelen. But as I unerstand for any case it was important to keep it with unspecified family for further filtering. As I do not know what is the global idea, I want to discuss it. Because there are options depending on how and where we want to handle those special names. Like keep unspecified family or change filtering logic.

I have added Serhey Popovych in the recepients, so he can give some ideas on what his aim is and help choose better solution.

13.03.2018, 21:12, "Alexander Zubkov" <[email protected]>:

Quoted 64 lines

Hi,

I just realized that you need patch for v4.15.0, which is easier to do. I'll send it as separate message now. I will make patch for the master branch, but later.

Quoted 57 lines · Luca Boccassi
Quoted 9 lines · Alexander Zubkov

 Hello again,

 The fun thing is that before the commit "ip route ls all" showed all routes, but "ip -[4|6] route ls all" showed only default. So it was broken too, but in other way.
 I see parsing of prefix was changed since my patch. So I need several days to propose fix. I think if "ip route ls [all|any]" shows all routes and "ip route ls default" shows only default, everybody will be happy with that?

 Hi,

 My only concern is that behaviour of existing commands that have been in releases is not changed, otherwise I get bugs raised :-)

 Thank you for your work!

Quoted 39 lines

 13.03.2018, 09:46, "Alexander Zubkov" <[email protected]>:

Quoted 38 lines

 Hello.

 May be the better way would be to change how "all"/"any" argument behaves? My original concern was about "default" only. I agree too, that "all" or "any" should work for all routes. But not for the default.

 12.03.2018, 22:37, "Luca Boccassi" <[email protected]>:

Quoted 30 lines · Stephen Hemminger
Quoted 7 lines

    This reverts commit 9135c4d6037ff9f1818507bac0049fc44db8c3d2.

    Debian maintainer found that basic command:

             # ip route flush all
     No longer worked as expected which breaks user scripts and
     expectations. It no longer flushed all IPv4 routes.
Quoted 8 lines

    ---

      ip/iproute.c | 65 ++++++++++++++++++----------------------
  --------
     ------------
      lib/utils.c  | 13 ++++++++++++
      2 files changed, 32 insertions(+), 46 deletions(-)

   Thanks, solves the problem. I'll backport it to Debian.

   Alexander, reproducing the issue is quite simple - before that commit,
   ip route ls all showed all routes, but with the change it started
   showing only the default table. Same for ip route flush.

   --
   Kind regards,
   Luca Boccassi

#9 lore raw

PATCH 1/1 treat "default" and "all"/"any" addresses differenty

Debian maintainer found that basic command:

	# ip route flush all
No longer worked as expected which breaks user scripts and
expectations. It no longer flushed all IPv4 routes.

Recently behavior of "default" prefix parameter was corrected. But at the same time behavior of "all"/"any" was altered too, because they were the same branch of the code. As those parameters mean different, they need to be treated differently in code too. This patch reflects the difference.

Also after mentioned change, address parsing code was changed more and address family was set explicitly even for "all"/"any" addresses. And that broke matching conditions further. This patch fixes that too and returns AF_UNSPEC to "all"/"any" address.

Now "default" is treated as top-level prefix (for example 0.0.0.0/0 in IPv4) and "all"/"any" always matches anything in exact, root and match modes.

---
 lib/utils.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)
lib/utils.c +14 -6
index 379739d..eba4fa7 100644
@@ -560,14 +560,23 @@ static int __get_addr_1(inet_prefix *addr, const char *name, int family)
 {
 	memset(addr, 0, sizeof(*addr));
 
-	if (strcmp(name, "default") == 0 ||
-	    strcmp(name, "all") == 0 ||
-	    strcmp(name, "any") == 0) {
+	if (strcmp(name, "default") == 0) {
 		if ((family == AF_DECnet) || (family == AF_MPLS))
 			return -1;
 		addr->family = (family != AF_UNSPEC) ? family : AF_INET;
 		addr->bytelen = af_byte_len(addr->family);
 		addr->bitlen = -2;
+		addr->flags |= PREFIXLEN_SPECIFIED;
+		return 0;
+	}
+
+	if (strcmp(name, "all") == 0 ||
+	    strcmp(name, "any") == 0) {
+		if ((family == AF_DECnet) || (family == AF_MPLS))
+			return -1;
+		addr->family = AF_UNSPEC;
+		addr->bytelen = 0;
+		addr->bitlen = -2;
 		return 0;
 	}
 
@@ -695,7 +704,7 @@ int get_prefix_1(inet_prefix *dst, char *arg, int family)
 
 	bitlen = af_bit_len(dst->family);
 
-	flags = PREFIXLEN_SPECIFIED;
+	flags = 0;
 	if (slash) {
 		unsigned int plen;
 
@@ -706,12 +715,11 @@ int get_prefix_1(inet_prefix *dst, char *arg, int family)
 		if (plen > bitlen)
 			return -1;
 
+		flags |= PREFIXLEN_SPECIFIED;
 		bitlen = plen;
 	} else {
 		if (dst->bitlen == -2)
 			bitlen = 0;
-		else
-			flags = 0;
 	}
 
 	dst->flags |= flags;
Signature · 1 line
1.9.1
#10 lore raw

Re: [PATCH iproute2] treat "default" and "all"/"any" addresses differenty

This version of patch is for master now.

18.03.2018, 17:50, "Alexander Zubkov" <[email protected]>:

Quoted 82 lines

Debian maintainer found that basic command:

        # ip route flush all
No longer worked as expected which breaks user scripts and
expectations. It no longer flushed all IPv4 routes.

Recently behavior of "default" prefix parameter was corrected. But at the same time behavior of "all"/"any" was altered too, because they were the same branch of the code. As those parameters mean different, they need to be treated differently in code too. This patch reflects the difference.

Also after mentioned change, address parsing code was changed more and address family was set explicitly even for "all"/"any" addresses. And that broke matching conditions further. This patch fixes that too and returns AF_UNSPEC to "all"/"any" address.

Now "default" is treated as top-level prefix (for example 0.0.0.0/0 in IPv4) and "all"/"any" always matches anything in exact, root and match modes.

---
 lib/utils.c | 20 ++++++++++++++------

 1 file changed, 14 insertions(+), 6 deletions(-)
lib/utils.c +14 -7
index 379739d..eba4fa7 100644
@@ -560,14 +560,23 @@ static int __get_addr_1(inet_prefix *addr, const char *name, int family)
  {
          memset(addr, 0, sizeof(*addr));
 
- if (strcmp(name, "default") == 0 ||
- strcmp(name, "all") == 0 ||
- strcmp(name, "any") == 0) {
+ if (strcmp(name, "default") == 0) {
                  if ((family == AF_DECnet) || (family == AF_MPLS))
                          return -1;
                  addr->family = (family != AF_UNSPEC) ? family : AF_INET;
                  addr->bytelen = af_byte_len(addr->family);
                  addr->bitlen = -2;
+ addr->flags |= PREFIXLEN_SPECIFIED;
+ return 0;
+ }
+
+ if (strcmp(name, "all") == 0 ||
+ strcmp(name, "any") == 0) {
+ if ((family == AF_DECnet) || (family == AF_MPLS))
+ return -1;
+ addr->family = AF_UNSPEC;
+ addr->bytelen = 0;
+ addr->bitlen = -2;
                  return 0;
          }
 
@@ -695,7 +704,7 @@ int get_prefix_1(inet_prefix *dst, char *arg, int family)
 
          bitlen = af_bit_len(dst->family);
 
- flags = PREFIXLEN_SPECIFIED;
+ flags = 0;
          if (slash) {
                  unsigned int plen;
 
@@ -706,12 +715,11 @@ int get_prefix_1(inet_prefix *dst, char *arg, int family)
                  if (plen > bitlen)
                          return -1;
 
+ flags |= PREFIXLEN_SPECIFIED;
                  bitlen = plen;
          } else {
                  if (dst->bitlen == -2)
                          bitlen = 0;
- else
- flags = 0;
          }
 
          dst->flags |= flags;
--

1.9.1

author Applied
#11 lore raw
In reply to Alexander Zubkov
Quoted 17 lines · On Wed, 14 Mar 2018 21:26:40 +0100 Alexander Zubkov <[email protected]> wrote:

Hello,

For example, it can be fixed in such way (patch is below):
- split handling of default and all/any
- set needed attributes in get_addr: PREFIXLEN_SPECIFIED flag for default
- and AF_UNSPEC for all/any
In this case "ip route show default" shows only default route and "ip route show all" shows all routes. And both also work when family (-4 or -6) is specified.
Serhey, does it goes in line with what you wanted to achieve? Because I do not know - may be there are reasons why all/any should be provided with specific family. If you think this solution is suitable, I'll do some additional tests and package the patch in a proper way for this mailing list.
And I'm unsure if check for AF_DECnet and AF_MPLS should be kept in both branches. May be someone have some additional thoughts on that?

I applied this to master.

We can work on the other cases after that.

#12 lore raw

Hi Stephen,

Looks like the new patch was applied after the revert of original patch and fix patch for 4.15 branch. Which is not correct and I did not test it. This is how patches were designed:
1) your revert patch - rolls back 4.15 branch to old behaviour by reverting the original patch
2) my patch for 4.15 - fixes problem is 4.15 branch, it does not require revert patch, it is an alternative solution for the problem, it is designed solely for version 4.15
3) my patch for master - fixes problem, it requires neither revert patch nor my patch for 4.15, it is standalone patch designed to do things right in master branch

27.03.2018, 18:01, "Stephen Hemminger" <[email protected]>:

Quoted 23 lines
Quoted 16 lines · On Wed, 14 Mar 2018 21:26:40 +0100 Alexander Zubkov <[email protected]> wrote:

 Hello,

 For example, it can be fixed in such way (patch is below):
 - split handling of default and all/any
 - set needed attributes in get_addr: PREFIXLEN_SPECIFIED flag for default
 - and AF_UNSPEC for all/any
 In this case "ip route show default" shows only default route and "ip route show all" shows all routes. And both also work when family (-4 or -6) is specified.
 Serhey, does it goes in line with what you wanted to achieve? Because I do not know - may be there are reasons why all/any should be provided with specific family. If you think this solution is suitable, I'll do some additional tests and package the patch in a proper way for this mailing list.
 And I'm unsure if check for AF_DECnet and AF_MPLS should be kept in both branches. May be someone have some additional thoughts on that?

I applied this to master.

We can work on the other cases after that.

#13 lore raw
Quoted 31 lines · On Tue, 27 Mar 2018 18:29:31 +0200 Alexander Zubkov <[email protected]> wrote:

Hi Stephen,

Looks like the new patch was applied after the revert of original patch and fix patch for 4.15 branch. Which is not correct and I did not test it. This is how patches were designed:
1) your revert patch - rolls back 4.15 branch to old behaviour by reverting the original patch
2) my patch for 4.15 - fixes problem is 4.15 branch, it does not require revert patch, it is an alternative solution for the problem, it is designed solely for version 4.15
3) my patch for master - fixes problem, it requires neither revert patch nor my patch for 4.15, it is standalone patch designed to do things right in master branch

27.03.2018, 18:01, "Stephen Hemminger" <[email protected]>:

Quoted 23 lines
Quoted 16 lines · On Wed, 14 Mar 2018 21:26:40 +0100 Alexander Zubkov <[email protected]> wrote:

 Hello,

 For example, it can be fixed in such way (patch is below):
 - split handling of default and all/any
 - set needed attributes in get_addr: PREFIXLEN_SPECIFIED flag for default
 - and AF_UNSPEC for all/any
 In this case "ip route show default" shows only default route and "ip route show all" shows all routes. And both also work when family (-4 or -6) is specified.
 Serhey, does it goes in line with what you wanted to achieve? Because I do not know - may be there are reasons why all/any should be provided with specific family. If you think this solution is suitable, I'll do some additional tests and package the patch in a proper way for this mailing list.
 And I'm unsure if check for AF_DECnet and AF_MPLS should be kept in both branches. May be someone have some additional thoughts on that?

I applied this to master.

We can work on the other cases after that.

Please send the update back to what works.

#14 lore raw

master before merging revert + my recent patch (1) should work. Or you mean to prepare patch to change new master to desired state? I can do it.

1) https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/patch/?id=7696f1097f79be2ce5984a8a16103fd17391cac2

27.03.2018, 19:00, "Stephen Hemminger" <[email protected]>:

Quoted 36 lines
Quoted 23 lines · On Tue, 27 Mar 2018 18:29:31 +0200 Alexander Zubkov <[email protected]> wrote:

 Hi Stephen,

 Looks like the new patch was applied after the revert of original patch and fix patch for 4.15 branch. Which is not correct and I did not test it. This is how patches were designed:
 1) your revert patch - rolls back 4.15 branch to old behaviour by reverting the original patch
 2) my patch for 4.15 - fixes problem is 4.15 branch, it does not require revert patch, it is an alternative solution for the problem, it is designed solely for version 4.15
 3) my patch for master - fixes problem, it requires neither revert patch nor my patch for 4.15, it is standalone patch designed to do things right in master branch

 27.03.2018, 18:01, "Stephen Hemminger" <[email protected]>:
 > On Wed, 14 Mar 2018 21:26:40 +0100
 > Alexander Zubkov <[email protected]> wrote:
 >
 >>  Hello,
 >>
 >>  For example, it can be fixed in such way (patch is below):
 >>  - split handling of default and all/any
 >>  - set needed attributes in get_addr: PREFIXLEN_SPECIFIED flag for default >>  - and AF_UNSPEC for all/any
 >>  In this case "ip route show default" shows only default route and "ip >>  route show all" shows all routes. And both also work when family (-4 or >>  -6) is specified.
 >>  Serhey, does it goes in line with what you wanted to achieve? Because I >>  do not know - may be there are reasons why all/any should be provided >>  with specific family. If you think this solution is suitable, I'll do

Quoted 8 lines

 >>  some additional tests and package the patch in a proper way for this >>  mailing list.
 >>  And I'm unsure if check for AF_DECnet and AF_MPLS should be kept in both >>  branches. May be someone have some additional thoughts on that? >
 > I applied this to master.
 >
 > We can work on the other cases after that.

Please send the update back to what works.

#15 lore raw
Quoted 41 lines · On Tue, 27 Mar 2018 19:33:28 +0200 Alexander Zubkov <[email protected]> wrote:

master before merging revert + my recent patch (1) should work. Or you mean to prepare patch to change new master to desired state? I can do it.

1) https://git.kernel.org/pub/scm/network/iproute2/iproute2.git/patch/?id=7696f1097f79be2ce5984a8a16103fd17391cac2

27.03.2018, 19:00, "Stephen Hemminger" <[email protected]>:

Quoted 36 lines
Quoted 23 lines · On Tue, 27 Mar 2018 18:29:31 +0200 Alexander Zubkov <[email protected]> wrote:

 Hi Stephen,

 Looks like the new patch was applied after the revert of original patch and fix patch for 4.15 branch. Which is not correct and I did not test it. This is how patches were designed:
 1) your revert patch - rolls back 4.15 branch to old behaviour by reverting the original patch
 2) my patch for 4.15 - fixes problem is 4.15 branch, it does not require revert patch, it is an alternative solution for the problem, it is designed solely for version 4.15
 3) my patch for master - fixes problem, it requires neither revert patch nor my patch for 4.15, it is standalone patch designed to do things right in master branch

 27.03.2018, 18:01, "Stephen Hemminger" <[email protected]>:
 > On Wed, 14 Mar 2018 21:26:40 +0100
 > Alexander Zubkov <[email protected]> wrote:
 >
 >>  Hello,
 >>
 >>  For example, it can be fixed in such way (patch is below):
 >>  - split handling of default and all/any
 >>  - set needed attributes in get_addr: PREFIXLEN_SPECIFIED flag for default >>  - and AF_UNSPEC for all/any
 >>  In this case "ip route show default" shows only default route and "ip >>  route show all" shows all routes. And both also work when family (-4 or >>  -6) is specified.
 >>  Serhey, does it goes in line with what you wanted to achieve? Because I >>  do not know - may be there are reasons why all/any should be provided >>  with specific family. If you think this solution is suitable, I'll do

Quoted 8 lines

 >>  some additional tests and package the patch in a proper way for this >>  mailing list.
 >>  And I'm unsure if check for AF_DECnet and AF_MPLS should be kept in both >>  branches. May be someone have some additional thoughts on that? >
 > I applied this to master.
 >
 > We can work on the other cases after that.

Please send the update back to what works.

Make patches against current master.
For visible repositories, I prefer to only move forward and not rollback. So you can send a revert patch than new code if that is easier.

#16 lore raw

PATCH 1/1 arrange prefix parsing code after redundant patches

A problem was reported with parsing of prefixes all/any/default. Commit 7696f1097f79be2ce5984a8a16103fd17391cac2 fixes the problem, but there were also other pathces applied:
00b31a6b2ecf73ee477f701098164600a2bfe227, which were intended to fix the same problem. And they became redundant now. This patch reverts changes introduced by those redundant patches.

---
 ip/iproute.c | 65 ++++++++++++++++++++++++++++++++++++++++++------------------
 lib/utils.c  | 13 ------------
 2 files changed, 46 insertions(+), 32 deletions(-)
ip/iproute.c +46 -19
index 32c93ed..bf886fd 100644
@@ -191,20 +191,42 @@ static int filter_nlmsg(struct nlmsghdr *n, struct rtattr **tb, int host_len)
 		return 0;
 	if ((filter.tos^r->rtm_tos)&filter.tosmask)
 		return 0;
-	if (filter.rdst.family &&
-	    (r->rtm_family != filter.rdst.family || filter.rdst.bitlen > r->rtm_dst_len))
-		return 0;
-	if (filter.mdst.family &&
-	    (r->rtm_family != filter.mdst.family ||
-	     (filter.mdst.bitlen >= 0 && filter.mdst.bitlen < r->rtm_dst_len)))
-		return 0;
-	if (filter.rsrc.family &&
-	    (r->rtm_family != filter.rsrc.family || filter.rsrc.bitlen > r->rtm_src_len))
-		return 0;
-	if (filter.msrc.family &&
-	    (r->rtm_family != filter.msrc.family ||
-	     (filter.msrc.bitlen >= 0 && filter.msrc.bitlen < r->rtm_src_len)))
-		return 0;
+	if (filter.rdst.family) {
+		if (r->rtm_family != filter.rdst.family ||
+		    filter.rdst.bitlen > r->rtm_dst_len)
+			return 0;
+	} else if (filter.rdst.flags & PREFIXLEN_SPECIFIED) {
+		if (filter.rdst.bitlen > r->rtm_dst_len)
+			return 0;
+	}
+	if (filter.mdst.family) {
+		if (r->rtm_family != filter.mdst.family ||
+		    (filter.mdst.bitlen >= 0 &&
+		     filter.mdst.bitlen < r->rtm_dst_len))
+			return 0;
+	} else if (filter.mdst.flags & PREFIXLEN_SPECIFIED) {
+		if (filter.mdst.bitlen >= 0 &&
+		    filter.mdst.bitlen < r->rtm_dst_len)
+			return 0;
+	}
+	if (filter.rsrc.family) {
+		if (r->rtm_family != filter.rsrc.family ||
+		    filter.rsrc.bitlen > r->rtm_src_len)
+			return 0;
+	} else if (filter.rsrc.flags & PREFIXLEN_SPECIFIED) {
+		if (filter.rsrc.bitlen > r->rtm_src_len)
+			return 0;
+	}
+	if (filter.msrc.family) {
+		if (r->rtm_family != filter.msrc.family ||
+		    (filter.msrc.bitlen >= 0 &&
+		     filter.msrc.bitlen < r->rtm_src_len))
+			return 0;
+	} else if (filter.msrc.flags & PREFIXLEN_SPECIFIED) {
+		if (filter.msrc.bitlen >= 0 &&
+		    filter.msrc.bitlen < r->rtm_src_len)
+			return 0;
+	}
 	if (filter.rvia.family) {
 		int family = r->rtm_family;
 
@@ -221,7 +243,9 @@ static int filter_nlmsg(struct nlmsghdr *n, struct rtattr **tb, int host_len)
 
 	if (tb[RTA_DST])
 		memcpy(&dst.data, RTA_DATA(tb[RTA_DST]), (r->rtm_dst_len+7)/8);
-	if (filter.rsrc.family || filter.msrc.family) {
+	if (filter.rsrc.family || filter.msrc.family ||
+	    filter.rsrc.flags & PREFIXLEN_SPECIFIED ||
+	    filter.msrc.flags & PREFIXLEN_SPECIFIED) {
 		if (tb[RTA_SRC])
 			memcpy(&src.data, RTA_DATA(tb[RTA_SRC]), (r->rtm_src_len+7)/8);
 	}
@@ -241,15 +265,18 @@ static int filter_nlmsg(struct nlmsghdr *n, struct rtattr **tb, int host_len)
 			memcpy(&prefsrc.data, RTA_DATA(tb[RTA_PREFSRC]), host_len/8);
 	}
 
-	if (filter.rdst.family && inet_addr_match(&dst, &filter.rdst, filter.rdst.bitlen))
+	if ((filter.rdst.family || filter.rdst.flags & PREFIXLEN_SPECIFIED) &&
+	    inet_addr_match(&dst, &filter.rdst, filter.rdst.bitlen))
 		return 0;
-	if (filter.mdst.family && filter.mdst.bitlen >= 0 &&
+	if ((filter.mdst.family || filter.mdst.flags & PREFIXLEN_SPECIFIED) &&
 	    inet_addr_match(&dst, &filter.mdst, r->rtm_dst_len))
 		return 0;
 
-	if (filter.rsrc.family && inet_addr_match(&src, &filter.rsrc, filter.rsrc.bitlen))
+	if ((filter.rsrc.family || filter.rsrc.flags & PREFIXLEN_SPECIFIED) &&
+	    inet_addr_match(&src, &filter.rsrc, filter.rsrc.bitlen))
 		return 0;
-	if (filter.msrc.family && filter.msrc.bitlen >= 0 &&
+	if ((filter.msrc.family || filter.msrc.flags & PREFIXLEN_SPECIFIED) &&
+	    filter.msrc.bitlen >= 0 &&
 	    inet_addr_match(&src, &filter.msrc, r->rtm_src_len))
 		return 0;
 
lib/utils.c +0 -13
index dadefb5..b9e9a6c 100644
@@ -693,19 +693,6 @@ int get_prefix_1(inet_prefix *dst, char *arg, int family)
 	char *slash;
 	int err, bitlen, flags;
 
-	memset(dst, 0, sizeof(*dst));
-
-	if (strcmp(arg, "default") == 0 ||
-	    strcmp(arg, "any") == 0 ||
-	    strcmp(arg, "all") == 0) {
-		if ((family == AF_DECnet) || (family == AF_MPLS))
-			return -1;
-		dst->family = family;
-		dst->bytelen = 0;
-		dst->bitlen = 0;
-		return 0;
-	}
-
 	slash = strchr(arg, '/');
 	if (slash)
 		*slash = 0;
Signature · 1 line
1.9.1
author Applied
#17 lore raw

Re: [PATCH iproute] arrange prefix parsing code after redundant patches

Quoted 8 lines · On Wed, 28 Mar 2018 01:57:13 +0200 Alexander Zubkov <[email protected]> wrote:

A problem was reported with parsing of prefixes all/any/default. Commit 7696f1097f79be2ce5984a8a16103fd17391cac2 fixes the problem, but there were also other pathces applied:
00b31a6b2ecf73ee477f701098164600a2bfe227, which were intended to fix the same problem. And they became redundant now. This patch reverts changes introduced by those redundant patches.

Thanks applied to current master branch

#18 lore raw

PATCH 1/1 treat "default" and "all"/"any" parameters differenty

In reply to Luca Boccassi

Debian maintainer found that basic command:

	# ip route flush all
No longer worked as expected which breaks user scripts and
expectations. It no longer flushed all IPv4 routes.

Recently behaviour of "default" prefix parameter was corrected. But at the same time behaviour of "all"/"any" was altered too, because they were the same branch of the code. As those parameters mean different, they need to be treated differently in code too. This patch reflects the difference.

---
 lib/utils.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
lib/utils.c +2 -1
index 9fa5220..b289d9c 100644
@@ -658,7 +658,8 @@ int get_prefix_1(inet_prefix *dst, char *arg, int family)
 		dst->family = family;
 		dst->bytelen = 0;
 		dst->bitlen = 0;
-		dst->flags |= PREFIXLEN_SPECIFIED;
+		if (strcmp(arg, "default") == 0)
+			dst->flags |= PREFIXLEN_SPECIFIED;
 		return 0;
 	}
 

--
1.9.1

Tested-by on v1 1/1
#19 lore raw

Re: [PATCH iproute2] treat "default" and "all"/"any" parameters differenty

Quoted 34 lines · Alexander Zubkov

Debian maintainer found that basic command:

	# ip route flush all
No longer worked as expected which breaks user scripts and
expectations. It no longer flushed all IPv4 routes.

Recently behaviour of "default" prefix parameter was corrected. But at
the same time behaviour of "all"/"any" was altered too, because they were the same branch of the code. As those parameters mean different, they need to be treated differently in code too. This patch reflects the difference.

---
  lib/utils.c | 3 ++-

  1 file changed, 2 insertions(+), 1 deletion(-)
lib/utils.c +0 -0
index 9fa5220..b289d9c 100644
@@ -658,7 +658,8 @@ int get_prefix_1(inet_prefix *dst, char *arg,

int
family)
   dst->family = family;
   dst->bytelen = 0;
   dst->bitlen = 0;

lib/utils.c +2 -1
-		dst->flags |= PREFIXLEN_SPECIFIED;
+		if (strcmp(arg, "default") == 0)
+			dst->flags |= PREFIXLEN_SPECIFIED;

   return 0;
   }

Quoted 2 lines

--
1.9.1

Yep solves the problem, ls all/any now work as before. Thanks!

Signature · 2 lines
Kind regards,
Luca Boccassi
#20 lore raw

Re: [PATCH iproute2] treat "default" and "all"/"any" parameters differenty

In reply to Alexander Zubkov
Quoted 33 lines · On Tue, 13 Mar 2018 21:19:45 +0100 Alexander Zubkov <[email protected]> wrote:

Debian maintainer found that basic command:

	# ip route flush all
No longer worked as expected which breaks user scripts and
expectations. It no longer flushed all IPv4 routes.

Recently behaviour of "default" prefix parameter was corrected. But at the same time behaviour of "all"/"any" was altered too, because they were the same branch of the code. As those parameters mean different, they need to be treated differently in code too. This patch reflects the difference.

---
  lib/utils.c | 3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)
lib/utils.c +2 -2
index 9fa5220..b289d9c 100644
@@ -658,7 +658,8 @@ int get_prefix_1(inet_prefix *dst, char *arg, int 
 family)
  		dst->family = family;
  		dst->bytelen = 0;
  		dst->bitlen = 0;
-		dst->flags |= PREFIXLEN_SPECIFIED;
+		if (strcmp(arg, "default") == 0)
+			dst->flags |= PREFIXLEN_SPECIFIED;
  		return 0;
  	}
 
--
Quoted 2 lines

1.9.1

Which code is this a patch against? the current master or followup to my revert of the original patch?

#21 lore raw

Re: [PATCH iproute2] treat "default" and "all"/"any" parameters differenty

Hi Stephen,

This patch is against v4.15.0 only. It will not fit the current master, because there were changes it that areas of code since then. I have made some patch for master too and trying to discuss it with Serhey, who made other changes there. He has not answered yet. If there are no answer for some more time, I'll consider that fix as suitable and send it as a proper patch to the list. That will not require reverse patch too.

16.03.2018, 21:37, "Stephen Hemminger" <[email protected]>:

Quoted 40 lines
Quoted 32 lines · On Tue, 13 Mar 2018 21:19:45 +0100 Alexander Zubkov <[email protected]> wrote:

 Debian maintainer found that basic command:

         # ip route flush all
 No longer worked as expected which breaks user scripts and
 expectations. It no longer flushed all IPv4 routes.

 Recently behaviour of "default" prefix parameter was corrected. But at the same time behaviour of "all"/"any" was altered too, because they were the same branch of the code. As those parameters mean different, they need to be treated differently in code too. This patch reflects the difference.

 ---
   lib/utils.c | 3 ++-

   1 file changed, 2 insertions(+), 1 deletion(-)

 diff --git a/lib/utils.c b/lib/utils.c
 index 9fa5220..b289d9c 100644
 --- a/lib/utils.c
 +++ b/lib/utils.c
 @@ -658,7 +658,8 @@ int get_prefix_1(inet_prefix *dst, char *arg, int family)
                   dst->family = family;
                   dst->bytelen = 0;
                   dst->bitlen = 0;
 - dst->flags |= PREFIXLEN_SPECIFIED;
 + if (strcmp(arg, "default") == 0)
 + dst->flags |= PREFIXLEN_SPECIFIED;
                   return 0;
           }

Quoted 2 lines

 --
 1.9.1

Which code is this a patch against? the current master or followup to my revert of the original patch?