Hammerfall DSP System Problems
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 7 lines
Quoted 3 lines
Later that evening I powered down. Upon rebooting the next morning it failed, and has failed ever since. That was last Thursday evening.
the same thing happened to me a week ago. i have, as usual, not had time to investigate further.
Well, it is actually quite comforting to know that folks with far more experience than I sometimes see the same strange behaviors!
Quoted 8 lines
Quoted 2 lines
This whole Alsa/HDSP thing is amazingly weird...
at the moment, i regret that we made the move to user-space loading of the "firmware" when we did. i think now that it was a mistake to do it at that time. it has caused a fundamental change in the way the driver sets up, but it came at a time when we weren't confident that setup was working for various cases.
I'm sure that it will get worked out. I think Joshua is currently having some good successes with the HDSP 9652, and I'm currently learning how to modify a Gentoo ebuild to accomplish doing a patch. I also have (after more pain than I wish to recount) Windows on this Gentoo box in a dual boot config, and have the RME firmware tools to upgrade and downgrade, so I think I'm almost set to be able to try this stuff out again.
I'm sure over the next few weeks and months this will get straightened out. :-)
Mark
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.
Quoted 2 lines · Mark Knecht
I'm sure that it will get worked out. I think Joshua is currently having some good successes with the HDSP 9652,
Yes, it works.
Quoted 5 lines
and I'm currently learning how to
modify a Gentoo ebuild to accomplish doing a patch. I also have (after more pain than I wish to recount) Windows on this Gentoo box in a dual boot config, and have the RME firmware tools to upgrade and downgrade, so I think I'm almost set to be able to try this stuff out again.
For what it's worth, i had problems with alsa 0.9.4 & SMP. i think there are some spinlock changes that aren't very well debugged yet. On the other hand, alsa 0.9rc7 seems fairly stable. i've gotten some lockups, but i've also used jack for 4-5 hours without any problem.
Signature · 8 lines
Victory to the Divine Mother!! after all, http://sahajayoga.org http://why-compete.org ------------------------------------------------------- This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.
Quoted 8 lines
Quoted 2 lines
so I think
I'm almost set to be able to try this stuff out again.For what it's worth, i had problems with alsa 0.9.4 & SMP. i think there are some spinlock changes that aren't very well debugged yet. On the other hand, alsa 0.9rc7 seems fairly stable. i've gotten some lockups, but i've also used jack for 4-5 hours without any problem.
Well, I found last night that if I removed Alsa and then rebuilt it, that as long as I didn't power down 0.9.4-rc1 stayed up and I could see my card even after a warm boot, but again, after a cold boot Alsa no longer recognized the card.
So, my new strategy is that every morning, as I brew my tea, I now do:
emerge -C alsa-driver alsa-utils alsa-tools ACCEPT_KEYWORDS="~x86" emerge alsa-driver alsa-utils alsa-tools
and then warm boot to get the driver to find the card. I still don't get sound, but at least my CPU knows the card is there.
I guess life is good when you finally know how to cope with it! ;-)
Mark
-------------------------------------------------------
This SF.net email is sponsored by: Etnus, makers of TotalView, The best thread debugger on the planet. Designed with thread debugging features you've never dreamed of, try TotalView 6 free at www.etnus.com.