: Analog/Digital output not working.
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=772>
======================================================================
Reported By: ianw1234
Assigned To:
======================================================================
Project: ALSA - driver Issue ID: 772 Category: PCI - emu10k1 Reproducibility: always Severity: major Priority: normal Status: new Distribution: Kernel Version: 2.6.9-1.681_FC3 ====================================================================== Date Submitted: 12-31-2004 23:02 CET Last Modified: 01-01-2005 10:01 CET
======================================================================
Summary: Analog/Digital output not working.
Description:
I've been unable to get my SB Live! to send analog pcm out through the Analog/Digital port. It's connected through this port to my receiver, and while AC3 over the digital port works fine, I can't get anything else to go over the line. I have a 48kHz wave file I've been testing, and I've tried playing it with aplay over hw0,0 (no good), hw0,1 (doesn't exist), and hw0,2 (no effect).
I have the master, IEC Coaxial, AC97, External amplifier, and SB Live Analog/Digital Output Jack all either unmuted or set to max volume. I've tried loading the snd_pcm_oss module with various snd_dsp_map settings without success.
I've tried this on 1.0.7 and 1.0.8rc1. I dimly remember this working in the past, so I don't know if this was broken in the upgrade to 1.0.7 (which I had to do because AC3 passthrough didn't work in the version that came with the 2.6.9 kernel) or whether I have some strange misconfiguration. Help is appreciated! Thanks!
======================================================================
----------------------------------------------------------------------
rlrevell - 01-01-05 02:28
----------------------------------------------------------------------
You don't have to do "a bunch of asound trickery", you just have to output to the correct device, as you can see.
----------------------------------------------------------------------
pzad - 01-01-05 10:01
----------------------------------------------------------------------
Try to play with "IEC958 Optical Raw" switch.
Issue History
Date Modified Username Field Change
======================================================================
12-31-04 23:02 ianw1234 New Issue 12-31-04 23:02 ianw1234 Kernel Version => 2.6.9-1.681_FC3 01-01-05 00:33 ianw1234 Note Added: 0003028 01-01-05 02:28 rlrevell Note Added: 0003030 01-01-05 10:01 pzad Note Added: 0003031
======================================================================
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt