Skip to contentSkip to conversation

: Analog/Digital output not working.

ALSA - driver 0000772 [email protected] 1 participant 1 message Jan 1, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=772>
======================================================================
Reported By: ianw1234
Assigned To:
======================================================================

Project:                    ALSA - driver
Issue ID:                   772
Category:                   PCI - emu10k1
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
Distribution:               
Kernel Version:             2.6.9-1.681_FC3
======================================================================
Date Submitted:             12-31-2004 23:02 CET
Last Modified:              01-01-2005 10:01 CET

======================================================================
Summary: Analog/Digital output not working.
Description:
I've been unable to get my SB Live! to send analog pcm out through the Analog/Digital port. It's connected through this port to my receiver, and while AC3 over the digital port works fine, I can't get anything else to go over the line. I have a 48kHz wave file I've been testing, and I've tried playing it with aplay over hw0,0 (no good), hw0,1 (doesn't exist), and hw0,2 (no effect).

I have the master, IEC Coaxial, AC97, External amplifier, and SB Live Analog/Digital Output Jack all either unmuted or set to max volume. I've tried loading the snd_pcm_oss module with various snd_dsp_map settings without success.

I've tried this on 1.0.7 and 1.0.8rc1. I dimly remember this working in the past, so I don't know if this was broken in the upgrade to 1.0.7 (which I had to do because AC3 passthrough didn't work in the version that came with the 2.6.9 kernel) or whether I have some strange misconfiguration. Help is appreciated! Thanks!
======================================================================

----------------------------------------------------------------------
rlrevell - 01-01-05 02:28
----------------------------------------------------------------------
You don't have to do "a bunch of asound trickery", you just have to output to the correct device, as you can see.

----------------------------------------------------------------------
pzad - 01-01-05 10:01
----------------------------------------------------------------------
Try to play with "IEC958 Optical Raw" switch.

Issue History
Date Modified Username Field Change
======================================================================

12-31-04 23:02 ianw1234       New Issue                                    
12-31-04 23:02 ianw1234       Kernel Version            => 2.6.9-1.681_FC3 
01-01-05 00:33 ianw1234       Note Added: 0003028                          
01-01-05 02:28 rlrevell       Note Added: 0003030                          
01-01-05 10:01 pzad           Note Added: 0003031                          

======================================================================

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt