arm: dts: imx8mn: sync dts from Linux Kernel
Subsystems (2)
PATCH 1/1 arm: dts: imx8mn: sync dts from Linux Kernel
Sync dts for imx8mn-evk with Linux Kernel and change name for PMIC used in SPL.
commit 1cfa1e68af8d40ab233d5d27bc8446e4c5107571("arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC") commit bc046b952a5494b0dc53be28779460cee1214a3f("arm64: dts: imx8mn-evk: use proper names for PMIC outputs")
--- arch/arm/dts/imx8mn-evk.dts | 56 ++++++++++++++++---------------- board/freescale/imx8mn_evk/spl.c | 4 +-- 2 files changed, 30 insertions(+), 30 deletions(-)
arch/arm/dts/imx8mn-evk.dts +28 -28
@@ -31,7 +31,7 @@ }; &i2c1 { - pmic: pca9450@25 { + pmic: pmic@25 { compatible = "nxp,pca9450b"; reg = <0x25>; pinctrl-names = "default";
@@ -41,18 +41,18 @@ regulators { buck1: BUCK1{ - regulator-name = "BUCK1"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; }; buck2: BUCK2 { - regulator-name = "BUCK2"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_ARM_0V9"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>;
@@ -61,63 +61,63 @@ }; buck4: BUCK4{ - regulator-name = "BUCK4"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; buck5: BUCK5{ - regulator-name = "BUCK5"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; buck6: BUCK6 { - regulator-name = "BUCK6"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "NVCC_DRAM_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; ldo1: LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <3300000>; + regulator-name = "NVCC_SNVS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo2: LDO2 { - regulator-name = "LDO2"; + regulator-name = "VDD_SNVS_0V8"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <800000>; regulator-boot-on; regulator-always-on; }; ldo3: LDO3 { - regulator-name = "LDO3"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo4: LDO4 { - regulator-name = "LDO4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDD_PHY_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-boot-on; regulator-always-on; }; ldo5: LDO5 { - regulator-name = "LDO5"; + regulator-name = "NVCC_SD2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on;
board/freescale/imx8mn_evk/spl.c +2 -2
@@ -69,9 +69,9 @@ int power_init_board(void)struct udevice *dev;int ret; - ret =pmic_get ("pca9450@25" , &dev); + ret =pmic_get ("pmic@25" , &dev);if (ret == -ENODEV ) { -puts ("No pca9450@25\n" ); +puts ("No pmci@25\n" );return 0 ; }if (ret !=0 )
Signature · 1 line
2.30.2
Quoted 4 lines · Heiko Thiery
Sync dts for imx8mn-evk with Linux Kernel and change name for PMIC used in SPL.
commit 1cfa1e68af8d40ab233d5d27bc8446e4c5107571("arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC") commit
bc046b952a5494b0dc53be28779460cee1214a3f("arm64: dts: imx8mn-evk: use proper names for PMIC outputs")
I think the way to sync dts is to choose one linux release RC to sync. not just sync partial.
Thanks,
Peng.
Quoted 146 lines
Signed-off-by Heiko Thiery <[email protected]>--- arch/arm/dts/imx8mn-evk.dts | 56 ++++++++++++++++---------------- board/freescale/imx8mn_evk/spl.c | 4 +-- 2 files changed, 30 insertions(+), 30 deletions(-)arch/arm/dts/imx8mn-evk.dts +28
-28@@ -31,7 +31,7 @@ }; &i2c1 { - pmic: pca9450@25 { + pmic: pmic@25 { compatible = "nxp,pca9450b"; reg = <0x25>; pinctrl-names = "default";@@ -41,18 +41,18 @@ regulators { buck1: BUCK1{ - regulator-name = "BUCK1"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; }; buck2: BUCK2 { - regulator-name = "BUCK2"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_ARM_0V9"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>;@@ -61,63 +61,63 @@ }; buck4: BUCK4{ - regulator-name = "BUCK4"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; buck5: BUCK5{ - regulator-name = "BUCK5"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; buck6: BUCK6 { - regulator-name = "BUCK6"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "NVCC_DRAM_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; ldo1: LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <3300000>; + regulator-name = "NVCC_SNVS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo2: LDO2 { - regulator-name = "LDO2"; + regulator-name = "VDD_SNVS_0V8"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <800000>; regulator-boot-on; regulator-always-on; }; ldo3: LDO3 { - regulator-name = "LDO3"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo4: LDO4 { - regulator-name = "LDO4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDD_PHY_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-boot-on; regulator-always-on; }; ldo5: LDO5 { - regulator-name = "LDO5"; + regulator-name = "NVCC_SD2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on;board/freescale/imx8mn_evk/spl.c +2
-2@@ -69,9 +69,9 @@ int power_init_board(void)struct udevice *dev;int ret; - ret =pmic_get ("pca9450@25" , &dev); + ret =pmic_get ("pmic@25" , &dev);if (ret == -ENODEV ) { -puts ("No pca9450@25\n" ); +puts ("No pmci@25\n" );return 0 ; }if (ret !=0 )
Hi,
Am Di., 21. Juni 2022 um 09:03 Uhr schrieb Peng Fan (OSS) <[email protected]>:
Quoted 11 lines · Heiko Thiery
Quoted 4 lines
Sync dts for imx8mn-evk with Linux Kernel and change name for PMIC used in SPL.
commit 1cfa1e68af8d40ab233d5d27bc8446e4c5107571("arm64: dts: imx8mn-evk: fix the min/max voltages of the PMIC") commit
bc046b952a5494b0dc53be28779460cee1214a3f("arm64: dts: imx8mn-evk: use proper names for PMIC outputs")I think the way to sync dts is to choose one linux release RC to sync. not just sync partial.
It is not partial .. I just wanted to show what changes are made.
Quoted 25 lines
Thanks,
Peng.Quoted 22 lines
Signed-off-by Heiko Thiery <[email protected]>--- arch/arm/dts/imx8mn-evk.dts | 56 ++++++++++++++++---------------- board/freescale/imx8mn_evk/spl.c | 4 +-- 2 files changed, 30 insertions(+), 30 deletions(-)arch/arm/dts/imx8mn-evk.dts +1
-1@@ -31,7 +31,7 @@ }; &i2c1 { - pmic: pca9450@25 { + pmic: pmic@25 { compatible = "nxp,pca9450b"; reg = <0x25>; pinctrl-names = "default";@@ -41,18 +41,18 @@
Quoted 1 line
arch/arm/dts/imx8mn-evk.dts line 42
Quoted 1 line
arch/arm/dts/imx8mn-evk.dts +0
-0regulators {I think the way to sync dts is to choose one linux release RC to sync.
not just sync partial.
Quoted 124 lines
Quoted 123 lines
arch/arm/dts/imx8mn-evk.dts +27
-27buck1: BUCK1{ - regulator-name = "BUCK1"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_SOC"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>; }; buck2: BUCK2 { - regulator-name = "BUCK2"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <2187500>; + regulator-name = "VDD_ARM_0V9"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1000000>; regulator-boot-on; regulator-always-on; regulator-ramp-delay = <3125>;@@ -61,63 +61,63 @@ }; buck4: BUCK4{ - regulator-name = "BUCK4"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; buck5: BUCK5{ - regulator-name = "BUCK5"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; buck6: BUCK6 { - regulator-name = "BUCK6"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <3400000>; + regulator-name = "NVCC_DRAM_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; regulator-boot-on; regulator-always-on; }; ldo1: LDO1 { - regulator-name = "LDO1"; - regulator-min-microvolt = <1600000>; - regulator-max-microvolt = <3300000>; + regulator-name = "NVCC_SNVS_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo2: LDO2 { - regulator-name = "LDO2"; + regulator-name = "VDD_SNVS_0V8"; regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1150000>; + regulator-max-microvolt = <800000>; regulator-boot-on; regulator-always-on; }; ldo3: LDO3 { - regulator-name = "LDO3"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDDA_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; ldo4: LDO4 { - regulator-name = "LDO4"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <3300000>; + regulator-name = "VDD_PHY_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-boot-on; regulator-always-on; }; ldo5: LDO5 { - regulator-name = "LDO5"; + regulator-name = "NVCC_SD2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on;board/freescale/imx8mn_evk/spl.c +2
-2@@ -69,9 +69,9 @@ int power_init_board(void)struct udevice *dev;int ret; - ret =pmic_get ("pca9450@25" , &dev); + ret =pmic_get ("pmic@25" , &dev);if (ret == -ENODEV ) { -puts ("No pca9450@25\n" ); +puts ("No pmci@25\n" );return 0 ; }if (ret !=0 )
Fabio Estevam
reviewerHi Heiko,
Quoted 4 lines · Heiko Thiery
Quoted 2 lines
I think the way to sync dts is to choose one linux release RC to sync. not just sync partial.
It is not partial .. I just wanted to show what changes are made.
I also had the impression that this was a partial sync.
Could you please send a v2 stating the kernel version where you synced from in the commit log?
Thanks
Quoted 8 lines · Fabio Estevam
Hi Heiko,
Quoted 3 lines · Heiko Thiery
Quoted 2 lines
I think the way to sync dts is to choose one linux release RC to sync. not just sync partial.
Quoted 8 lines
Quoted 1 line
It is not partial .. I just wanted to show what changes are made.
I also had the impression that this was a partial sync.
Could you please send a v2 stating the kernel version where you synced from in the commit log?
Thanks
Heiko,
Please update the short commit message as well to indicate you are updating the imx8mn-evk - I found 'arm: dts: imx8mn: sync dts from Linux Kernel' to think you were updating the imx8mn dtsi.
Best Regards,
Tim