Skip to contentSkip to conversation

ASoC: Intel: catpt: Code cleanup

PATCH Superseded Cezary Rojewski 3 participants 18 messages Jun 1 – Jun 2

Subsystems (3)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Cezary Rojewski

author maintainer
#0 lore raw

cover ASoC: Intel: catpt: Code cleanup

All of the changes found here are cleanups and from functional perspective, have no impact - either unused code is being removed or existing code is altered to use helpers/macros to improve readability.

Collateral of recent fixes [1]. There is one more patchset with similar goal following this one. Before the team managed to actually fix the problem, a number of changes were added to make the code easier to understand for people who are not the author (me).

[1]: https://lore.kernel.org/linux-sound/[email protected]/

Cezary Rojewski (7):
ASoC: Intel: catpt: Utilize lock-guard helper
ASoC: Intel: catpt: Replace RAM-helpers with resource_xxx()
ASoC: Intel: catpt: Simplify the RAM-navigation code
ASoC: Intel: catpt: Simplify catpt_stream_find()
ASoC: Intel: catpt: Remove unused WAVES controls
ASoC: Intel: catpt: Drop manipulation of the obsolete direction flag
ASoC: Intel: catpt: Cleanup components_kcontrols[]

 sound/soc/intel/catpt/device.c    |  9 ++---
 sound/soc/intel/catpt/dsp.c       | 19 ++++------
 sound/soc/intel/catpt/ipc.c       | 10 +----
 sound/soc/intel/catpt/loader.c    |  7 +---
 sound/soc/intel/catpt/pcm.c       | 63 ++++++-------------------------
 sound/soc/intel/catpt/registers.h |  2 +
 6 files changed, 27 insertions(+), 83 deletions(-)
Signature · 1 line
2.34.1
author maintainer
#1 lore raw

PATCH 1/7 ASoC: Intel: catpt: Utilize lock-guard helper

The lock-guard helps simplify the driver's code.

---
 sound/soc/intel/catpt/dsp.c | 12 ++++--------
 sound/soc/intel/catpt/ipc.c | 10 ++--------
 2 files changed, 6 insertions(+), 16 deletions(-)
sound/soc/intel/catpt/dsp.c +4 -8
index 677f348909c8..b1865d10f995 100644
@@ -5,6 +5,7 @@
 // Author: Cezary Rojewski <[email protected]>
 //
 
+#include <linux/cleanup.h>
 #include <linux/devcoredump.h>
 #include <linux/dma-mapping.h>
 #include <linux/firmware.h>
@@ -256,17 +257,15 @@ static int catpt_dsp_select_lpclock(struct catpt_dev *cdev, bool lp, bool waiti)
 	u32 mask, reg, val;
 	int ret;
 
-	mutex_lock(&cdev->clk_mutex);
+	guard(mutex)(&cdev->clk_mutex);
 
 	val = lp ? CATPT_CS_LPCS : 0;
 	reg = catpt_readl_shim(cdev, CS1) & CATPT_CS_LPCS;
 	dev_dbg(cdev->dev, "LPCS [0x%08lx] 0x%08x -> 0x%08x",
 		CATPT_CS_LPCS, reg, val);
 
-	if (reg == val) {
-		mutex_unlock(&cdev->clk_mutex);
+	if (reg == val)
 		return 0;
-	}
 
 	if (waiti) {
 		/* wait for DSP to signal WAIT state */
@@ -276,10 +275,8 @@ static int catpt_dsp_select_lpclock(struct catpt_dev *cdev, bool lp, bool waiti)
 		if (ret) {
 			dev_warn(cdev->dev, "await WAITI timeout\n");
 			/* no signal - only high clock selection allowed */
-			if (lp) {
-				mutex_unlock(&cdev->clk_mutex);
+			if (lp)
 				return 0;
-			}
 		}
 	}
 
@@ -303,7 +300,6 @@ static int catpt_dsp_select_lpclock(struct catpt_dev *cdev, bool lp, bool waiti)
 	/* update PLL accordingly */
 	cdev->spec->pll_shutdown(cdev, lp);
 
-	mutex_unlock(&cdev->clk_mutex);
 	return 0;
 }
 
sound/soc/intel/catpt/ipc.c +2 -8
index 225757e6a776..11238fc641a4 100644
@@ -128,14 +128,8 @@ int catpt_dsp_send_msg_timeout(struct catpt_dev *cdev,
 			       struct catpt_ipc_msg request,
 			       struct catpt_ipc_msg *reply, int timeout, const char *name)
 {
-	struct catpt_ipc *ipc = &cdev->ipc;
-	int ret;
-
-	mutex_lock(&ipc->mutex);
-	ret = catpt_dsp_do_send_msg(cdev, request, reply, timeout, name);
-	mutex_unlock(&ipc->mutex);
-
-	return ret;
+	guard(mutex)(&cdev->ipc.mutex);
+	return catpt_dsp_do_send_msg(cdev, request, reply, timeout, name);
 }
 
 int catpt_dsp_send_msg(struct catpt_dev *cdev, struct catpt_ipc_msg request,
Signature · 1 line
2.34.1
#2 lore raw

Re: [PATCH 1/7] ASoC: Intel: catpt: Utilize lock-guard helper

Quoted 1 line · Cezary Rojewski

The lock-guard helps simplify the driver's code.

...

sound/soc/intel/catpt/ipc.c int catpt_dsp_send_msg_timeout(struct catpt_dev *cdev, · line 131

Quoted 1 line
sound/soc/intel/catpt/ipc.c +1 -0
+	guard(mutex)(&cdev->ipc.mutex);

LGTM, however, I would still have a blank line here.

Quoted 2 lines
sound/soc/intel/catpt/ipc.c +1 -0
+	return catpt_dsp_do_send_msg(cdev, request, reply, timeout, name);
 }
Signature · 2 lines
With Best Regards,
Andy Shevchenko
author maintainer
#3 lore raw

PATCH 2/7 ASoC: Intel: catpt: Replace RAM-helpers with resource_xxx()

In reply to Cezary Rojewski

For catpt_sram_init(), the exact same functionality has been provided to ioport.h with commit 9fb6fef0fb49 ("resource: Add resource set range and size helpers") in recent years.

As for catpt_dram/iram_size(), leave it for the driver initialization only. Have all other manipulations be done using resource_xxx() API which are more familiar to kernel developers.

---
 sound/soc/intel/catpt/device.c | 9 +++------
 sound/soc/intel/catpt/loader.c | 7 +------
 2 files changed, 4 insertions(+), 12 deletions(-)
sound/soc/intel/catpt/device.c +3 -6
index b0a926db483c..b176aebea9d5 100644
@@ -233,12 +233,9 @@ static void catpt_dev_init(struct catpt_dev *cdev, struct device *dev,
 	cdev->devfmt[CATPT_SSP_IFACE_0].iface = UINT_MAX;
 	cdev->devfmt[CATPT_SSP_IFACE_1].iface = UINT_MAX;
 
+	resource_set_range(&cdev->dram, spec->host_dram_offset, catpt_dram_size(cdev));
+	resource_set_range(&cdev->iram, spec->host_iram_offset, catpt_iram_size(cdev));
 	catpt_ipc_init(&cdev->ipc, dev);
-
-	catpt_sram_init(&cdev->dram, spec->host_dram_offset,
-			catpt_dram_size(cdev));
-	catpt_sram_init(&cdev->iram, spec->host_iram_offset,
-			catpt_iram_size(cdev));
 }
 
 static int catpt_acpi_probe(struct platform_device *pdev)
@@ -287,7 +284,7 @@ static int catpt_acpi_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	cdev->dxbuf_vaddr = dmam_alloc_coherent(dev, catpt_dram_size(cdev),
+	cdev->dxbuf_vaddr = dmam_alloc_coherent(dev, resource_size(&cdev->dram),
 						&cdev->dxbuf_paddr, GFP_KERNEL);
 	if (!cdev->dxbuf_vaddr)
 		return -ENOMEM;
sound/soc/intel/catpt/loader.c +1 -6
index 75457187b614..c577f2e17ddf 100644
@@ -7,6 +7,7 @@
 
 #include <linux/dma-mapping.h>
 #include <linux/firmware.h>
+#include <linux/ioport.h>
 #include <linux/slab.h>
 #include "core.h"
 #include "registers.h"
@@ -50,12 +51,6 @@ struct catpt_fw_block_hdr {
 	u32 rsvd;
 } __packed;
 
-void catpt_sram_init(struct resource *sram, u32 start, u32 size)
-{
-	sram->start = start;
-	sram->end = start + size - 1;
-}
-
 void catpt_sram_free(struct resource *sram)
 {
 	struct resource *res, *save;
Signature · 1 line
2.34.1
maintainer
#4 lore raw

Re: [PATCH 2/7] ASoC: Intel: catpt: Replace RAM-helpers with resource_xxx()

sound/soc/intel/catpt/loader.c struct catpt_fw_block_hdr { · line 58

Quoted 6 lines · Cezary Rojewski
sound/soc/intel/catpt/loader.c +0 -6
-void catpt_sram_init(struct resource *sram, u32 start, u32 size)
-{
-	sram->start = start;
-	sram->end = start + size - 1;
-}
-

The prototype in the header could be cleaned up too.

author maintainer
#5 lore raw

Re: [PATCH 2/7] ASoC: Intel: catpt: Replace RAM-helpers with resource_xxx()

Quoted 10 lines · Mark Brown

sound/soc/intel/catpt/loader.c struct catpt_fw_block_hdr { · line 58

Quoted 6 lines · Cezary Rojewski
sound/soc/intel/catpt/loader.c +0 -6
-void catpt_sram_init(struct resource *sram, u32 start, u32 size)
-{
-	sram->start = start;
-	sram->end = start + size - 1;
-}
-

The prototype in the header could be cleaned up too.

Ack, thank you for spotting this out.

author maintainer
#6 lore raw

PATCH 3/7 ASoC: Intel: catpt: Simplify the RAM-navigation code

In reply to Cezary Rojewski

Add catpt_iram_addr() to the catpt helpers family and replace all the open arithmetics with them. Makes it easier to understand the code.

---
 sound/soc/intel/catpt/dsp.c       | 6 +++---
 sound/soc/intel/catpt/registers.h | 2 ++
 2 files changed, 5 insertions(+), 3 deletions(-)
sound/soc/intel/catpt/dsp.c +3 -3
index b1865d10f995..60ec561d670c 100644
@@ -122,7 +122,7 @@ int catpt_dmac_probe(struct catpt_dev *cdev)
 	if (!dmac)
 		return -ENOMEM;
 
-	dmac->regs = cdev->lpe_ba + cdev->spec->host_dma_offset[CATPT_DMA_DEVID];
+	dmac->regs = catpt_dma_addr(cdev, CATPT_DMA_DEVID);
 	dmac->dev = cdev->dev;
 	dmac->irq = cdev->irq;
 
@@ -498,7 +498,7 @@ int catpt_coredump(struct catpt_dev *cdev)
 	hdr->size = resource_size(&cdev->iram);
 	pos += sizeof(*hdr);
 
-	memcpy_fromio(pos, cdev->lpe_ba + cdev->iram.start, hdr->size);
+	memcpy_fromio(pos, catpt_iram_addr(cdev), hdr->size);
 	pos += hdr->size;
 
 	hdr = (struct catpt_dump_section_hdr *)pos;
@@ -508,7 +508,7 @@ int catpt_coredump(struct catpt_dev *cdev)
 	hdr->size = resource_size(&cdev->dram);
 	pos += sizeof(*hdr);
 
-	memcpy_fromio(pos, cdev->lpe_ba + cdev->dram.start, hdr->size);
+	memcpy_fromio(pos, catpt_dram_addr(cdev), hdr->size);
 	pos += hdr->size;
 
 	hdr = (struct catpt_dump_section_hdr *)pos;
sound/soc/intel/catpt/registers.h +2 -0
index 64bd534a76ff..864802bd7809 100644
@@ -144,6 +144,8 @@
 
 #define catpt_dram_addr(cdev) \
 	((cdev)->lpe_ba + (cdev)->spec->host_dram_offset)
+#define catpt_iram_addr(cdev) \
+	((cdev)->lpe_ba + (cdev)->spec->host_iram_offset)
 #define catpt_shim_addr(cdev) \
 	((cdev)->lpe_ba + (cdev)->spec->host_shim_offset)
 #define catpt_dma_addr(cdev, dma) \
Signature · 1 line
2.34.1
author maintainer
#7 lore raw

PATCH 4/7 ASoC: Intel: catpt: Simplify catpt_stream_find()

In reply to Cezary Rojewski

Code line reduction and more transparent variable naming. No functional changes.

---
 sound/soc/intel/catpt/pcm.c | 17 ++++++-----------
 1 file changed, 6 insertions(+), 11 deletions(-)
sound/soc/intel/catpt/pcm.c +6 -11
index 7b2bab12c707..deb76eb79d18 100644
@@ -99,19 +99,14 @@ catpt_get_stream_template(struct snd_pcm_substream *substream)
 }
 
 /* Caller responsible for holding ->stream_mutex. */
-struct catpt_stream_runtime *
-catpt_stream_find(struct catpt_dev *cdev, u8 stream_hw_id)
+struct catpt_stream_runtime *catpt_stream_find(struct catpt_dev *cdev, u8 stream_hw_id)
 {
-	struct catpt_stream_runtime *pos, *result = NULL;
+	struct catpt_stream_runtime *stream;
 
-	list_for_each_entry(pos, &cdev->stream_list, node) {
-		if (pos->info.stream_hw_id == stream_hw_id) {
-			result = pos;
-			break;
-		}
-	}
-
-	return result;
+	list_for_each_entry(stream, &cdev->stream_list, node)
+		if (stream->info.stream_hw_id == stream_hw_id)
+			return stream;
+	return NULL;
 }
 
 /* Caller responsible for holding ->stream_mutex. */
Signature · 1 line
2.34.1
#8 lore raw

Re: [PATCH 4/7] ASoC: Intel: catpt: Simplify catpt_stream_find()

Quoted 2 lines · Cezary Rojewski

Code line reduction and more transparent variable naming. No functional changes.

...

Quoted 6 lines
sound/soc/intel/catpt/pcm.c +2 -2
+struct catpt_stream_runtime *catpt_stream_find(struct catpt_dev *cdev, u8 stream_hw_id)
 {
-	struct catpt_stream_runtime *pos, *result = NULL;
+	struct catpt_stream_runtime *stream;
 
-	list_for_each_entry(pos, &cdev->stream_list, node) {

sound/soc/intel/catpt/pcm.c catpt_get_stream_template(struct snd_pcm_substream *substream) · line 108

Quoted 10 lines
sound/soc/intel/catpt/pcm.c +3 -7
-		if (pos->info.stream_hw_id == stream_hw_id) {
-			result = pos;
-			break;
-		}
-	}
-
-	return result;
+	list_for_each_entry(stream, &cdev->stream_list, node)
+		if (stream->info.stream_hw_id == stream_hw_id)
+			return stream;

Please, keep a blank line here.

Quoted 2 lines
sound/soc/intel/catpt/pcm.c +1 -0
+	return NULL;
 }
Signature · 2 lines
With Best Regards,
Andy Shevchenko
author maintainer
#9 lore raw

Re: [PATCH 4/7] ASoC: Intel: catpt: Simplify catpt_stream_find()

Quoted 11 lines · Andy Shevchenko
Quoted 2 lines · Cezary Rojewski

Code line reduction and more transparent variable naming. No functional changes.

...

Quoted 5 lines
sound/soc/intel/catpt/pcm.c +2 -1
+struct catpt_stream_runtime *catpt_stream_find(struct catpt_dev *cdev, u8 stream_hw_id)
  {
-	struct catpt_stream_runtime *pos, *result = NULL;
+	struct catpt_stream_runtime *stream;
Quoted 13 lines

sound/soc/intel/catpt/pcm.c catpt_get_stream_template(struct snd_pcm_substream *substream) · line 108

Quoted 11 lines
sound/soc/intel/catpt/pcm.c +3 -8
-	list_for_each_entry(pos, &cdev->stream_list, node) {
-		if (pos->info.stream_hw_id == stream_hw_id) {
-			result = pos;
-			break;
-		}
-	}
-
-	return result;
+	list_for_each_entry(stream, &cdev->stream_list, node)
+		if (stream->info.stream_hw_id == stream_hw_id)
+			return stream;

Please, keep a blank line here.

Agreed, will give it a day and apply in v3.

Quoted 4 lines
Quoted 3 lines
sound/soc/intel/catpt/pcm.c +1 -0
+	return NULL;
  }
author maintainer
#10 lore raw

PATCH 5/7 ASoC: Intel: catpt: Remove unused WAVES controls

In reply to Cezary Rojewski

Support for the WAVES module was not officially published. The kcontrols are here to retain 1:1 uapi when transitioning from the haswell- to the catpt-driver. The catpt-driver is very stable and several years passed with no WAVES users so it is save to remove the code.

---
 sound/soc/intel/catpt/pcm.c | 32 --------------------------------
 1 file changed, 32 deletions(-)
sound/soc/intel/catpt/pcm.c +0 -32
index deb76eb79d18..bfa94f5ffc8d 100644
@@ -967,32 +967,6 @@ static int catpt_loopback_mute_put(struct snd_kcontrol *kctl, struct snd_ctl_ele
 	return 1;
 }
 
-static int catpt_waves_switch_get(struct snd_kcontrol *kcontrol,
-				  struct snd_ctl_elem_value *ucontrol)
-{
-	return 0;
-}
-
-static int catpt_waves_switch_put(struct snd_kcontrol *kcontrol,
-				  struct snd_ctl_elem_value *ucontrol)
-{
-	return 0;
-}
-
-static int catpt_waves_param_get(struct snd_kcontrol *kcontrol,
-				 unsigned int __user *bytes,
-				 unsigned int size)
-{
-	return 0;
-}
-
-static int catpt_waves_param_put(struct snd_kcontrol *kcontrol,
-				 const unsigned int __user *bytes,
-				 unsigned int size)
-{
-	return 0;
-}
-
 static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(catpt_volume_tlv, -9000, 300, 1);
 
 #define CATPT_VOLUME_CTL(kname, pname) {		\
@@ -1017,12 +991,6 @@ CATPT_VOLUME_CTL("Media1 Playback Volume", OFFLOAD2),
 CATPT_VOLUME_CTL("Mic Capture Volume", CAPTURE1),
 SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&(bool[1]) {0},
 		    catpt_loopback_mute_get, catpt_loopback_mute_put),
-/* Enable or disable WAVES module */
-SOC_SINGLE_BOOL_EXT("Waves Switch", 0,
-		    catpt_waves_switch_get, catpt_waves_switch_put),
-/* WAVES module parameter control */
-SND_SOC_BYTES_TLV("Waves Set Param", 128,
-		  catpt_waves_param_get, catpt_waves_param_put),
 };
 
 static const struct snd_soc_dapm_widget component_widgets[] = {
Signature · 1 line
2.34.1
#11 lore raw

Re: [PATCH 5/7] ASoC: Intel: catpt: Remove unused WAVES controls

Quoted 2 lines · Cezary Rojewski

Support for the WAVES module was not officially published. The kcontrols are here to retain 1:1 uapi when transitioning from the haswell- to the

I'm not sure I got the 'haswell-' part, if it's a name of the driver, spell it fully. Otherwise it sounds like a codename, which spells Haswell.

Quoted 2 lines

catpt-driver. The catpt-driver is very stable and several years passed with no WAVES users so it is save to remove the code.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
author maintainer
#12 lore raw

Re: [PATCH 5/7] ASoC: Intel: catpt: Remove unused WAVES controls

Quoted 6 lines · Andy Shevchenko
Quoted 2 lines · Cezary Rojewski

Support for the WAVES module was not officially published. The kcontrols are here to retain 1:1 uapi when transitioning from the haswell- to the

I'm not sure I got the 'haswell-' part, if it's a name of the driver, spell it fully. Otherwise it sounds like a codename, which spells Haswell.

Yes, the above refers to the haswell-driver, predecessor to the catpt-driver. Ack, will reword.

Quoted 3 lines
Quoted 2 lines

catpt-driver. The catpt-driver is very stable and several years passed with no WAVES users so it is save to remove the code.

author maintainer
#13 lore raw

PATCH 6/7 ASoC: Intel: catpt: Drop manipulation of the obsolete direction flag

In reply to Cezary Rojewski

Setting up direction for struct dma_slave_config is obsolete, see the description of the struct. The transfer performed by the catpt-driver is also always DMA_MEM_TO_MEM not DMA_MEM_TO_DEV with preparation step being dmaengine_prep_dma_memcpy().

DW's ->device_prep_dma_memcpy() always fixes the direction to DMA_MEM_TO_MEM even if its user fails to do so, see
drivers/dma/dw/core.c. While the change impacts number of checks done
by ->device_config() - p/m buswidth checks are skipped - fields being fixed up in those i.e.: .dst_addr_width and .src_addr_width, do not take part in DMA_MEM_TO_MEM transfer.

---
 sound/soc/intel/catpt/dsp.c | 1 -
 1 file changed, 1 deletion(-)
sound/soc/intel/catpt/dsp.c +0 -1
index 60ec561d670c..960344991b11 100644
@@ -44,7 +44,6 @@ struct dma_chan *catpt_dma_request_config_chan(struct catpt_dev *cdev)
 	}
 
 	memset(&config, 0, sizeof(config));
-	config.direction = DMA_MEM_TO_DEV;
 	config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
 	config.src_maxburst = 16;
Signature · 1 line
2.34.1
author maintainer
#14 lore raw

PATCH 7/7 ASoC: Intel: catpt: Cleanup components_kcontrols[]

In reply to Cezary Rojewski

Fix alignment and drop redundant comments.

---
 sound/soc/intel/catpt/pcm.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
sound/soc/intel/catpt/pcm.c +6 -8
index bfa94f5ffc8d..01b015b4584b 100644
@@ -983,14 +983,12 @@ static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(catpt_volume_tlv, -9000, 300, 1);
 }
 
 static const struct snd_kcontrol_new component_kcontrols[] = {
-/* Master volume (mixer stream) */
-CATPT_VOLUME_CTL("Master Playback Volume", MIXER),
-/* Individual volume controls for offload and capture */
-CATPT_VOLUME_CTL("Media0 Playback Volume", OFFLOAD1),
-CATPT_VOLUME_CTL("Media1 Playback Volume", OFFLOAD2),
-CATPT_VOLUME_CTL("Mic Capture Volume", CAPTURE1),
-SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&(bool[1]) {0},
-		    catpt_loopback_mute_get, catpt_loopback_mute_put),
+	CATPT_VOLUME_CTL("Master Playback Volume", MIXER),
+	CATPT_VOLUME_CTL("Media0 Playback Volume", OFFLOAD1),
+	CATPT_VOLUME_CTL("Media1 Playback Volume", OFFLOAD2),
+	CATPT_VOLUME_CTL("Mic Capture Volume", CAPTURE1),
+	SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&(bool[1]) {0},
+			    catpt_loopback_mute_get, catpt_loopback_mute_put),
 };
 
 static const struct snd_soc_dapm_widget component_widgets[] = {
Signature · 1 line
2.34.1
#15 lore raw

Re: [PATCH 7/7] ASoC: Intel: catpt: Cleanup components_kcontrols[]

Quoted 1 line · Cezary Rojewski

Fix alignment and drop redundant comments.

...

Quoted 4 lines

static const struct snd_kcontrol_new component_kcontrols[] = {

sound/soc/intel/catpt/pcm.c +0 -3
-/* Master volume (mixer stream) */
-CATPT_VOLUME_CTL("Master Playback Volume", MIXER),
-/* Individual volume controls for offload and capture */

sound/soc/intel/catpt/pcm.c static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(catpt_volume_tlv, -9000, 300, 1); · line 990

Quoted 10 lines
sound/soc/intel/catpt/pcm.c +5 -5
-CATPT_VOLUME_CTL("Media0 Playback Volume", OFFLOAD1),
-CATPT_VOLUME_CTL("Media1 Playback Volume", OFFLOAD2),
-CATPT_VOLUME_CTL("Mic Capture Volume", CAPTURE1),
-SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&(bool[1]) {0},
-		    catpt_loopback_mute_get, catpt_loopback_mute_put),
+	CATPT_VOLUME_CTL("Master Playback Volume", MIXER),
+	CATPT_VOLUME_CTL("Media0 Playback Volume", OFFLOAD1),
+	CATPT_VOLUME_CTL("Media1 Playback Volume", OFFLOAD2),
+	CATPT_VOLUME_CTL("Mic Capture Volume", CAPTURE1),
+	SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&(bool[1]) {0},

While at it, can't we simply do outside of this initialiser something like

static bool loopback_mute;

and here

SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&loopback_mute,

Quoted 2 lines
sound/soc/intel/catpt/pcm.c +1 -0
+			    catpt_loopback_mute_get, catpt_loopback_mute_put),
 };
Signature · 2 lines
With Best Regards,
Andy Shevchenko
author maintainer
#16 lore raw

Re: [PATCH 7/7] ASoC: Intel: catpt: Cleanup components_kcontrols[]

Quoted 22 lines · Andy Shevchenko
Quoted 1 line · Cezary Rojewski

Fix alignment and drop redundant comments.

...

Quoted 4 lines
  static const struct snd_kcontrol_new component_kcontrols[] = {
sound/soc/intel/catpt/pcm.c +0 -3
-/* Master volume (mixer stream) */
-CATPT_VOLUME_CTL("Master Playback Volume", MIXER),
-/* Individual volume controls for offload and capture */

sound/soc/intel/catpt/pcm.c static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(catpt_volume_tlv, -9000, 300, 1); · line 990

Quoted 10 lines
sound/soc/intel/catpt/pcm.c +5 -5
-CATPT_VOLUME_CTL("Media0 Playback Volume", OFFLOAD1),
-CATPT_VOLUME_CTL("Media1 Playback Volume", OFFLOAD2),
-CATPT_VOLUME_CTL("Mic Capture Volume", CAPTURE1),
-SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&(bool[1]) {0},
-		    catpt_loopback_mute_get, catpt_loopback_mute_put),
+	CATPT_VOLUME_CTL("Master Playback Volume", MIXER),
+	CATPT_VOLUME_CTL("Media0 Playback Volume", OFFLOAD1),
+	CATPT_VOLUME_CTL("Media1 Playback Volume", OFFLOAD2),
+	CATPT_VOLUME_CTL("Mic Capture Volume", CAPTURE1),
+	SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&(bool[1]) {0},

While at it, can't we simply do outside of this initialiser something like

Quoted 5 lines

static bool loopback_mute;

and here

SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&loopback_mute,

Hmm.. not a bad idea though the loopback_mute static would never be referred to. All the functions obtain the values with kctl->private_value and I'd like things to state that way.

Quoted 3 lines
Quoted 2 lines
sound/soc/intel/catpt/pcm.c +1 -0
+			    catpt_loopback_mute_get, catpt_loopback_mute_put),
  };
Reviewed-by on the v1 series
#17 lore raw
In reply to Cezary Rojewski
Quoted 8 lines · Cezary Rojewski

All of the changes found here are cleanups and from functional perspective, have no impact - either unused code is being removed or existing code is altered to use helpers/macros to improve readability.

Collateral of recent fixes [1]. There is one more patchset with similar goal following this one. Before the team managed to actually fix the problem, a number of changes were added to make the code easier to understand for people who are not the author (me).

All makes sense to me, a few nit-picks though.

Signature · 2 lines
With Best Regards,
Andy Shevchenko