ASoC: Intel: catpt: Code cleanup
Subsystems (3)
Cezary Rojewski
maintainercover ASoC: Intel: catpt: Code cleanup
All of the changes found here are cleanups and from functional perspective, have no impact - either unused code is being removed or existing code is altered to use helpers/macros to improve readability.
Collateral of recent fixes [1]. There is one more patchset with similar goal following this one. Before the team managed to actually fix the problem, a number of changes were added to make the code easier to understand for people who are not the author (me).
[1]: https://lore.kernel.org/linux-sound/[email protected]/
Cezary Rojewski (7):
ASoC: Intel: catpt: Utilize lock-guard helper
ASoC: Intel: catpt: Replace RAM-helpers with resource_xxx()
ASoC: Intel: catpt: Simplify the RAM-navigation code
ASoC: Intel: catpt: Simplify catpt_stream_find()
ASoC: Intel: catpt: Remove unused WAVES controls
ASoC: Intel: catpt: Drop manipulation of the obsolete direction flag
ASoC: Intel: catpt: Cleanup components_kcontrols[]
sound/soc/intel/catpt/device.c | 9 ++--- sound/soc/intel/catpt/dsp.c | 19 ++++------ sound/soc/intel/catpt/ipc.c | 10 +---- sound/soc/intel/catpt/loader.c | 7 +--- sound/soc/intel/catpt/pcm.c | 63 ++++++------------------------- sound/soc/intel/catpt/registers.h | 2 + 6 files changed, 27 insertions(+), 83 deletions(-)
Signature · 1 line
2.34.1
Cezary Rojewski
maintainerPATCH 1/7 ASoC: Intel: catpt: Utilize lock-guard helper
The lock-guard helps simplify the driver's code.
--- sound/soc/intel/catpt/dsp.c | 12 ++++-------- sound/soc/intel/catpt/ipc.c | 10 ++-------- 2 files changed, 6 insertions(+), 16 deletions(-)
sound/soc/intel/catpt/dsp.c +4 -8
@@ -5,6 +5,7 @@// Author: Cezary Rojewski <[email protected]> // +#include <linux/cleanup.h> #include <linux/devcoredump.h> #include <linux/dma-mapping.h> #include <linux/firmware.h>
@@ -256,17 +257,15 @@ static int catpt_dsp_select_lpclock(struct catpt_dev *cdev, bool lp, bool waiti)u32 mask, reg, val;int ret; -mutex_lock (&cdev->clk_mutex); +guard (mutex)(&cdev->clk_mutex); val = lp ?CATPT_CS_LPCS :0 ; reg =catpt_readl_shim (cdev,CS1 ) &CATPT_CS_LPCS ;dev_dbg (cdev->dev,"LPCS [0x%08lx] 0x%08x -> 0x%08x" ,CATPT_CS_LPCS , reg, val); -if (reg == val) { -mutex_unlock (&cdev->clk_mutex); +if (reg == val)return 0 ; - }if (waiti) {/* wait for DSP to signal WAIT state */
@@ -276,10 +275,8 @@ static int catpt_dsp_select_lpclock(struct catpt_dev *cdev, bool lp, bool waiti)if (ret) {dev_warn (cdev->dev,"await WAITI timeout\n" );/* no signal - only high clock selection allowed */ -if (lp) { -mutex_unlock (&cdev->clk_mutex); +if (lp)return 0 ; - } } }
@@ -303,7 +300,6 @@ static int catpt_dsp_select_lpclock(struct catpt_dev *cdev, bool lp, bool waiti)/* update PLL accordingly */ cdev->spec->pll_shutdown (cdev, lp); -mutex_unlock (&cdev->clk_mutex);return 0 ; }
sound/soc/intel/catpt/ipc.c +2 -8
@@ -128,14 +128,8 @@ int catpt_dsp_send_msg_timeout(struct catpt_dev *cdev,struct catpt_ipc_msg request, struct catpt_ipc_msg *reply, int timeout, const char *name) { - struct catpt_ipc *ipc = &cdev->ipc; -int ret; - -mutex_lock (&ipc->mutex); - ret =catpt_dsp_do_send_msg (cdev, request, reply, timeout, name); -mutex_unlock (&ipc->mutex); - -return ret; + guard(mutex)(&cdev->ipc.mutex); +return catpt_dsp_do_send_msg (cdev, request, reply, timeout, name); } int catpt_dsp_send_msg(struct catpt_dev *cdev, struct catpt_ipc_msg request,
Signature · 1 line
2.34.1
Re: [PATCH 1/7] ASoC: Intel: catpt: Utilize lock-guard helper
Quoted 1 line · Cezary Rojewski
The lock-guard helps simplify the driver's code.
...
sound/soc/intel/catpt/ipc.c int catpt_dsp_send_msg_timeout(struct catpt_dev *cdev, · line 131
Quoted 1 line
sound/soc/intel/catpt/ipc.c +1
-0+guard (mutex)(&cdev->ipc.mutex);
LGTM, however, I would still have a blank line here.
Quoted 2 lines
sound/soc/intel/catpt/ipc.c +1
-0+return catpt_dsp_do_send_msg (cdev, request, reply, timeout, name); }
Signature · 2 lines
With Best Regards, Andy Shevchenko
Cezary Rojewski
maintainerPATCH 2/7 ASoC: Intel: catpt: Replace RAM-helpers with resource_xxx()
In reply to Cezary RojewskiFor catpt_sram_init(), the exact same functionality has been provided to ioport.h with commit 9fb6fef0fb49 ("resource: Add resource set range and size helpers") in recent years.
As for catpt_dram/iram_size(), leave it for the driver initialization only. Have all other manipulations be done using resource_xxx() API which are more familiar to kernel developers.
--- sound/soc/intel/catpt/device.c | 9 +++------ sound/soc/intel/catpt/loader.c | 7 +------ 2 files changed, 4 insertions(+), 12 deletions(-)
sound/soc/intel/catpt/device.c +3 -6
@@ -233,12 +233,9 @@ static void catpt_dev_init(struct catpt_dev *cdev, struct device *dev, cdev->devfmt[CATPT_SSP_IFACE_0 ].iface =UINT_MAX ; cdev->devfmt[CATPT_SSP_IFACE_1 ].iface =UINT_MAX ; +resource_set_range (&cdev->dram, spec->host_dram_offset,catpt_dram_size (cdev)); +resource_set_range (&cdev->iram, spec->host_iram_offset,catpt_iram_size (cdev));catpt_ipc_init (&cdev->ipc, dev); - -catpt_sram_init (&cdev->dram, spec->host_dram_offset, -catpt_dram_size (cdev)); -catpt_sram_init (&cdev->iram, spec->host_iram_offset, -catpt_iram_size (cdev)); }static int catpt_acpi_probe (struct platform_device *pdev)
@@ -287,7 +284,7 @@ static int catpt_acpi_probe(struct platform_device *pdev)if (ret)return ret; - cdev->dxbuf_vaddr =dmam_alloc_coherent (dev,catpt_dram_size (cdev), + cdev->dxbuf_vaddr =dmam_alloc_coherent (dev,resource_size (&cdev->dram), &cdev->dxbuf_paddr,GFP_KERNEL );if (!cdev->dxbuf_vaddr)return -ENOMEM ;
sound/soc/intel/catpt/loader.c +1 -6
@@ -7,6 +7,7 @@#include <linux/dma-mapping.h> #include <linux/firmware.h> +#include <linux/ioport.h> #include <linux/slab.h> #include "core.h" #include "registers.h"
@@ -50,12 +51,6 @@ struct catpt_fw_block_hdr {u32 rsvd; } __packed; -void catpt_sram_init (struct resource *sram,u32 start,u32 size) -{ - sram->start = start; - sram->end = start + size -1 ; -} -void catpt_sram_free (struct resource *sram) {struct resource *res, *save;
Signature · 1 line
2.34.1
Mark Brown
maintainerRe: [PATCH 2/7] ASoC: Intel: catpt: Replace RAM-helpers with resource_xxx()
sound/soc/intel/catpt/loader.c struct catpt_fw_block_hdr { · line 58
Quoted 6 lines · Cezary Rojewski
sound/soc/intel/catpt/loader.c +0
-6-void catpt_sram_init (struct resource *sram,u32 start,u32 size) -{ - sram->start = start; - sram->end = start + size -1 ; -} -
The prototype in the header could be cleaned up too.
Cezary Rojewski
maintainerRe: [PATCH 2/7] ASoC: Intel: catpt: Replace RAM-helpers with resource_xxx()
Quoted 10 lines · Mark Brown
sound/soc/intel/catpt/loader.c struct catpt_fw_block_hdr { · line 58
Quoted 6 lines · Cezary Rojewski
sound/soc/intel/catpt/loader.c +0
-6-void catpt_sram_init (struct resource *sram,u32 start,u32 size) -{ - sram->start = start; - sram->end = start + size -1 ; -} -The prototype in the header could be cleaned up too.
Ack, thank you for spotting this out.
Cezary Rojewski
maintainerPATCH 3/7 ASoC: Intel: catpt: Simplify the RAM-navigation code
In reply to Cezary RojewskiAdd catpt_iram_addr() to the catpt helpers family and replace all the open arithmetics with them. Makes it easier to understand the code.
--- sound/soc/intel/catpt/dsp.c | 6 +++--- sound/soc/intel/catpt/registers.h | 2 ++ 2 files changed, 5 insertions(+), 3 deletions(-)
sound/soc/intel/catpt/dsp.c +3 -3
@@ -122,7 +122,7 @@ int catpt_dmac_probe(struct catpt_dev *cdev)if (!dmac)return -ENOMEM ; - dmac->regs = cdev->lpe_ba + cdev->spec->host_dma_offset[CATPT_DMA_DEVID ]; + dmac->regs =catpt_dma_addr (cdev,CATPT_DMA_DEVID ); dmac->dev = cdev->dev; dmac->irq = cdev->irq;
@@ -498,7 +498,7 @@ int catpt_coredump(struct catpt_dev *cdev) hdr->size =resource_size (&cdev->iram); pos +=sizeof (*hdr); -memcpy_fromio (pos, cdev->lpe_ba + cdev->iram.start, hdr->size); +memcpy_fromio (pos,catpt_iram_addr (cdev), hdr->size); pos += hdr->size; hdr = (struct catpt_dump_section_hdr *)pos;
@@ -508,7 +508,7 @@ int catpt_coredump(struct catpt_dev *cdev) hdr->size =resource_size (&cdev->dram); pos +=sizeof (*hdr); -memcpy_fromio (pos, cdev->lpe_ba + cdev->dram.start, hdr->size); +memcpy_fromio (pos,catpt_dram_addr (cdev), hdr->size); pos += hdr->size; hdr = (struct catpt_dump_section_hdr *)pos;
sound/soc/intel/catpt/registers.h +2 -0
@@ -144,6 +144,8 @@#define catpt_dram_addr (cdev) \ ((cdev)->lpe_ba + (cdev)->spec->host_dram_offset) +#define catpt_iram_addr (cdev) \ + ((cdev)->lpe_ba + (cdev)->spec->host_iram_offset)#define catpt_shim_addr (cdev) \ ((cdev)->lpe_ba + (cdev)->spec->host_shim_offset)#define catpt_dma_addr (cdev, dma) \
Signature · 1 line
2.34.1
Cezary Rojewski
maintainerPATCH 4/7 ASoC: Intel: catpt: Simplify catpt_stream_find()
In reply to Cezary RojewskiCode line reduction and more transparent variable naming. No functional changes.
--- sound/soc/intel/catpt/pcm.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-)
sound/soc/intel/catpt/pcm.c +6 -11
@@ -99,19 +99,14 @@ catpt_get_stream_template(struct snd_pcm_substream *substream) }/* Caller responsible for holding ->stream_mutex. */ -struct catpt_stream_runtime * -catpt_stream_find (struct catpt_dev *cdev,u8 stream_hw_id) +struct catpt_stream_runtime *catpt_stream_find (struct catpt_dev *cdev,u8 stream_hw_id) { -struct catpt_stream_runtime *pos, *result =NULL ; +struct catpt_stream_runtime *stream; -list_for_each_entry (pos, &cdev->stream_list, node) { -if (pos->info.stream_hw_id == stream_hw_id) { - result = pos; -break ; - } - } - -return result; +list_for_each_entry (stream, &cdev->stream_list, node) +if (stream->info.stream_hw_id == stream_hw_id) +return stream; +return NULL ; }/* Caller responsible for holding ->stream_mutex. */
Signature · 1 line
2.34.1
Re: [PATCH 4/7] ASoC: Intel: catpt: Simplify catpt_stream_find()
Quoted 2 lines · Cezary Rojewski
Code line reduction and more transparent variable naming. No functional changes.
...
Quoted 6 lines
sound/soc/intel/catpt/pcm.c +2
-2+struct catpt_stream_runtime *catpt_stream_find (struct catpt_dev *cdev,u8 stream_hw_id) { -struct catpt_stream_runtime *pos, *result =NULL ; +struct catpt_stream_runtime *stream; -list_for_each_entry (pos, &cdev->stream_list, node) {
sound/soc/intel/catpt/pcm.c catpt_get_stream_template(struct snd_pcm_substream *substream) · line 108
Quoted 10 lines
sound/soc/intel/catpt/pcm.c +3
-7-if (pos->info.stream_hw_id == stream_hw_id) { - result = pos; -break ; - } - } - -return result; +list_for_each_entry (stream, &cdev->stream_list, node) +if (stream->info.stream_hw_id == stream_hw_id) +return stream;
Please, keep a blank line here.
Quoted 2 lines
sound/soc/intel/catpt/pcm.c +1
-0+return NULL ; }
Signature · 2 lines
With Best Regards, Andy Shevchenko
Cezary Rojewski
maintainerRe: [PATCH 4/7] ASoC: Intel: catpt: Simplify catpt_stream_find()
Quoted 11 lines · Andy Shevchenko
Quoted 2 lines · Cezary Rojewski
Code line reduction and more transparent variable naming. No functional changes.
...
Quoted 5 lines
sound/soc/intel/catpt/pcm.c +2
-1+struct catpt_stream_runtime *catpt_stream_find (struct catpt_dev *cdev,u8 stream_hw_id) { -struct catpt_stream_runtime *pos, *result =NULL ; +struct catpt_stream_runtime *stream;
Quoted 13 lines
sound/soc/intel/catpt/pcm.c catpt_get_stream_template(struct snd_pcm_substream *substream) · line 108
Quoted 11 lines
sound/soc/intel/catpt/pcm.c +3
-8-list_for_each_entry (pos, &cdev->stream_list, node) { -if (pos->info.stream_hw_id == stream_hw_id) { - result = pos; -break ; - } - } - -return result; +list_for_each_entry (stream, &cdev->stream_list, node) +if (stream->info.stream_hw_id == stream_hw_id) +return stream;Please, keep a blank line here.
Agreed, will give it a day and apply in v3.
Quoted 4 lines
Quoted 3 lines
sound/soc/intel/catpt/pcm.c +1
-0+return NULL ; }
Cezary Rojewski
maintainerPATCH 5/7 ASoC: Intel: catpt: Remove unused WAVES controls
In reply to Cezary RojewskiSupport for the WAVES module was not officially published. The kcontrols are here to retain 1:1 uapi when transitioning from the haswell- to the catpt-driver. The catpt-driver is very stable and several years passed with no WAVES users so it is save to remove the code.
--- sound/soc/intel/catpt/pcm.c | 32 -------------------------------- 1 file changed, 32 deletions(-)
sound/soc/intel/catpt/pcm.c +0 -32
@@ -967,32 +967,6 @@ static int catpt_loopback_mute_put(struct snd_kcontrol *kctl, struct snd_ctl_elereturn 1 ; } -static int catpt_waves_switch_get (struct snd_kcontrol *kcontrol, -struct snd_ctl_elem_value *ucontrol) -{ -return 0 ; -} - -static int catpt_waves_switch_put (struct snd_kcontrol *kcontrol, -struct snd_ctl_elem_value *ucontrol) -{ -return 0 ; -} - -static int catpt_waves_param_get (struct snd_kcontrol *kcontrol, -unsigned int __user *bytes, -unsigned int size) -{ -return 0 ; -} - -static int catpt_waves_param_put (struct snd_kcontrol *kcontrol, -const unsigned int __user *bytes, -unsigned int size) -{ -return 0 ; -} - static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(catpt_volume_tlv, -9000, 300, 1);#define CATPT_VOLUME_CTL (kname, pname) { \
@@ -1017,12 +991,6 @@ CATPT_VOLUME_CTL("Media1 Playback Volume", OFFLOAD2),CATPT_VOLUME_CTL ("Mic Capture Volume" ,CAPTURE1 ),SOC_SINGLE_BOOL_EXT ("Loopback Mute" , (unsigned long )&(bool [1 ]) {0 }, catpt_loopback_mute_get, catpt_loopback_mute_put), -/* Enable or disable WAVES module */ -SOC_SINGLE_BOOL_EXT ("Waves Switch" ,0 , - catpt_waves_switch_get, catpt_waves_switch_put), -/* WAVES module parameter control */ -SND_SOC_BYTES_TLV ("Waves Set Param" ,128 , - catpt_waves_param_get, catpt_waves_param_put), }; static const struct snd_soc_dapm_widget component_widgets[] = {
Signature · 1 line
2.34.1
Re: [PATCH 5/7] ASoC: Intel: catpt: Remove unused WAVES controls
Quoted 2 lines · Cezary Rojewski
Support for the WAVES module was not officially published. The kcontrols are here to retain 1:1 uapi when transitioning from the haswell- to the
I'm not sure I got the 'haswell-' part, if it's a name of the driver, spell it fully. Otherwise it sounds like a codename, which spells Haswell.
Quoted 2 lines
catpt-driver. The catpt-driver is very stable and several years passed with no WAVES users so it is save to remove the code.
Signature · 2 lines
With Best Regards, Andy Shevchenko
Cezary Rojewski
maintainerRe: [PATCH 5/7] ASoC: Intel: catpt: Remove unused WAVES controls
Quoted 6 lines · Andy Shevchenko
Quoted 2 lines · Cezary Rojewski
Support for the WAVES module was not officially published. The kcontrols are here to retain 1:1 uapi when transitioning from the haswell- to the
I'm not sure I got the 'haswell-' part, if it's a name of the driver, spell it fully. Otherwise it sounds like a codename, which spells Haswell.
Yes, the above refers to the haswell-driver, predecessor to the catpt-driver. Ack, will reword.
Quoted 3 lines
Quoted 2 lines
catpt-driver. The catpt-driver is very stable and several years passed with no WAVES users so it is save to remove the code.
Cezary Rojewski
maintainerPATCH 6/7 ASoC: Intel: catpt: Drop manipulation of the obsolete direction flag
In reply to Cezary RojewskiSetting up direction for struct dma_slave_config is obsolete, see the description of the struct. The transfer performed by the catpt-driver is also always DMA_MEM_TO_MEM not DMA_MEM_TO_DEV with preparation step being dmaengine_prep_dma_memcpy().
DW's ->device_prep_dma_memcpy() always fixes the direction to DMA_MEM_TO_MEM even if its user fails to do so, seedrivers/dma/dw/core.c. While the change impacts number of checks done
by ->device_config() - p/m buswidth checks are skipped - fields being fixed up in those i.e.: .dst_addr_width and .src_addr_width, do not take part in DMA_MEM_TO_MEM transfer.
--- sound/soc/intel/catpt/dsp.c | 1 - 1 file changed, 1 deletion(-)
sound/soc/intel/catpt/dsp.c +0 -1
@@ -44,7 +44,6 @@ struct dma_chan *catpt_dma_request_config_chan(struct catpt_dev *cdev) }memset (&config,0 ,sizeof (config)); - config.direction =DMA_MEM_TO_DEV ; config.src_addr_width =DMA_SLAVE_BUSWIDTH_4_BYTES ; config.dst_addr_width =DMA_SLAVE_BUSWIDTH_4_BYTES ; config.src_maxburst =16 ;
Signature · 1 line
2.34.1
Cezary Rojewski
maintainerPATCH 7/7 ASoC: Intel: catpt: Cleanup components_kcontrols[]
In reply to Cezary RojewskiFix alignment and drop redundant comments.
--- sound/soc/intel/catpt/pcm.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
sound/soc/intel/catpt/pcm.c +6 -8
@@ -983,14 +983,12 @@ static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(catpt_volume_tlv, -9000, 300, 1); }static const struct snd_kcontrol_new component_kcontrols[] = { -/* Master volume (mixer stream) */ -CATPT_VOLUME_CTL ("Master Playback Volume" ,MIXER ), -/* Individual volume controls for offload and capture */ -CATPT_VOLUME_CTL ("Media0 Playback Volume" ,OFFLOAD1 ), -CATPT_VOLUME_CTL ("Media1 Playback Volume" ,OFFLOAD2 ), -CATPT_VOLUME_CTL ("Mic Capture Volume" ,CAPTURE1 ), -SOC_SINGLE_BOOL_EXT ("Loopback Mute" , (unsigned long )&(bool [1 ]) {0 }, - catpt_loopback_mute_get, catpt_loopback_mute_put), +CATPT_VOLUME_CTL ("Master Playback Volume" ,MIXER ), +CATPT_VOLUME_CTL ("Media0 Playback Volume" ,OFFLOAD1 ), +CATPT_VOLUME_CTL ("Media1 Playback Volume" ,OFFLOAD2 ), +CATPT_VOLUME_CTL ("Mic Capture Volume" ,CAPTURE1 ), +SOC_SINGLE_BOOL_EXT ("Loopback Mute" , (unsigned long )&(bool [1 ]) {0 }, + catpt_loopback_mute_get, catpt_loopback_mute_put), };static const struct snd_soc_dapm_widget component_widgets[] = {
Signature · 1 line
2.34.1
Re: [PATCH 7/7] ASoC: Intel: catpt: Cleanup components_kcontrols[]
Quoted 1 line · Cezary Rojewski
Fix alignment and drop redundant comments.
...
Quoted 4 lines
static const struct
snd_kcontrol_newcomponent_kcontrols[] = {sound/soc/intel/catpt/pcm.c +0
-3-/* Master volume (mixer stream) */ -CATPT_VOLUME_CTL("Master Playback Volume", MIXER), -/* Individual volume controls for offload and capture */
sound/soc/intel/catpt/pcm.c static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(catpt_volume_tlv, -9000, 300, 1); · line 990
Quoted 10 lines
sound/soc/intel/catpt/pcm.c +5
-5-CATPT_VOLUME_CTL ("Media0 Playback Volume" ,OFFLOAD1 ), -CATPT_VOLUME_CTL ("Media1 Playback Volume" ,OFFLOAD2 ), -CATPT_VOLUME_CTL ("Mic Capture Volume" ,CAPTURE1 ), -SOC_SINGLE_BOOL_EXT ("Loopback Mute" , (unsigned long )&(bool [1 ]) {0 }, - catpt_loopback_mute_get, catpt_loopback_mute_put), +CATPT_VOLUME_CTL ("Master Playback Volume" ,MIXER ), +CATPT_VOLUME_CTL ("Media0 Playback Volume" ,OFFLOAD1 ), +CATPT_VOLUME_CTL ("Media1 Playback Volume" ,OFFLOAD2 ), +CATPT_VOLUME_CTL ("Mic Capture Volume" ,CAPTURE1 ), + SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&(bool[1]) {0},
While at it, can't we simply do outside of this initialiser something like
static bool loopback_mute;
and here
SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&loopback_mute,
Quoted 2 lines
sound/soc/intel/catpt/pcm.c +1
-0+ catpt_loopback_mute_get, catpt_loopback_mute_put), };
Signature · 2 lines
With Best Regards, Andy Shevchenko
Cezary Rojewski
maintainerRe: [PATCH 7/7] ASoC: Intel: catpt: Cleanup components_kcontrols[]
Quoted 22 lines · Andy Shevchenko
Quoted 1 line · Cezary Rojewski
Fix alignment and drop redundant comments.
...
Quoted 4 lines
static const struct snd_kcontrol_new component_kcontrols[] = {sound/soc/intel/catpt/pcm.c +0
-3-/* Master volume (mixer stream) */ -CATPT_VOLUME_CTL("Master Playback Volume", MIXER), -/* Individual volume controls for offload and capture */ sound/soc/intel/catpt/pcm.c static const SNDRV_CTL_TLVD_DECLARE_DB_SCALE(catpt_volume_tlv, -9000, 300, 1); · line 990
Quoted 10 lines
sound/soc/intel/catpt/pcm.c +5
-5-CATPT_VOLUME_CTL ("Media0 Playback Volume" ,OFFLOAD1 ), -CATPT_VOLUME_CTL ("Media1 Playback Volume" ,OFFLOAD2 ), -CATPT_VOLUME_CTL ("Mic Capture Volume" ,CAPTURE1 ), -SOC_SINGLE_BOOL_EXT ("Loopback Mute" , (unsigned long )&(bool [1 ]) {0 }, - catpt_loopback_mute_get, catpt_loopback_mute_put), +CATPT_VOLUME_CTL ("Master Playback Volume" ,MIXER ), +CATPT_VOLUME_CTL ("Media0 Playback Volume" ,OFFLOAD1 ), +CATPT_VOLUME_CTL ("Media1 Playback Volume" ,OFFLOAD2 ), +CATPT_VOLUME_CTL ("Mic Capture Volume" ,CAPTURE1 ), + SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&(bool[1]) {0},While at it, can't we simply do outside of this initialiser something like
Quoted 5 lines
static bool
loopback_mute;and here
SOC_SINGLE_BOOL_EXT("Loopback Mute", (unsigned long)&loopback_mute,
Hmm.. not a bad idea though the loopback_mute static would never be referred to. All the functions obtain the values with kctl->private_value and I'd like things to state that way.
Quoted 3 lines
Quoted 2 lines
sound/soc/intel/catpt/pcm.c +1
-0+ catpt_loopback_mute_get, catpt_loopback_mute_put), };
Quoted 8 lines · Cezary Rojewski
All of the changes found here are cleanups and from functional perspective, have no impact - either unused code is being removed or existing code is altered to use helpers/macros to improve readability.
Collateral of recent fixes [1]. There is one more patchset with similar goal following this one. Before the team managed to actually fix the problem, a number of changes were added to make the code easier to understand for people who are not the author (me).
All makes sense to me, a few nit-picks though.
Signature · 2 lines
With Best Regards, Andy Shevchenko