Populate entries for 4.17
cover Populate entries for 4.17
Hello,
The following changes are preparation work for the 4.17 release. This is my first pass at the log for the release, it's likely missing more entries.
I'm Ccing all maintainers in this cover letter and also in patch #2 for further feedback on missing items.
Thanks,
Henry
Henry Wang (3):
CHANGELOG: Update link for RELEASE-4.16.0
CHANGELOG: Add missing entries for work during the 4.17 release
CHANGELOG: Start new "unstable" section
CHANGELOG.md | 31 +++++++++++++++++++++++++++++-- 1 file changed, 29 insertions(+), 2 deletions(-)
Signature · 1 line
2.25.1
PATCH 1/3 CHANGELOG: Update link for RELEASE-4.16.0
--- CHANGELOG.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
CHANGELOG.md +1 -1
@@ -18,7 +18,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) ### Removed / support downgraded - dropped support for the (x86-only) "vesa-mtrr" and "vesa-remap" command line options -## [4.16.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - 2021-12-02 +## [4.16.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=RELEASE-4.16.0) - 2021-12-02 ### Removed - XENSTORED_ROOTDIR environment variable from configuartion files and
Signature · 1 line
2.25.1
Re: [PATCH 1/3] CHANGELOG: Update link for RELEASE-4.16.0
Hi Henry,
Quoted 1 line · Henry Wang
Signed-off-by Henry Wang <[email protected]>
This also wants to be backported to staging-4.16.
Cheers,
Quoted 17 lines
--- CHANGELOG.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)CHANGELOG.md +1
-1@@ -18,7 +18,7 @@ The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) ### Removed / support downgraded - dropped support for the (x86-only) "vesa-mtrr" and "vesa-remap" command line options -## [4.16.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - 2021-12-02 +## [4.16.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=RELEASE-4.16.0) - 2021-12-02 ### Removed - XENSTORED_ROOTDIR environment variable from configuartion files and
Signature · 1 line
Julien Grall
Re: [PATCH 1/3] CHANGELOG: Update link for RELEASE-4.16.0
In reply to Henry WangQuoted 8 lines · Henry Wang
Signed-off-by Henry Wang <[email protected]>---
CHANGELOG.md | 2 +-1 file changed, 1 insertion(+), 1 deletion(-)
Hi Henry,
The changes don’t seem to be specific to the OCaml tools/ part that I care about and so not sure if you were looking for an an Ack but happy to provide for this and your 2 other CHANGELOG patches.
— C
RE: [PATCH 1/3] CHANGELOG: Update link for RELEASE-4.16.0
Hi Christian,
(trim the CC list to avoid spamming)
Quoted 9 lines
-----Original Message-----
From: Christian Lindig <[email protected]>Quoted 6 lines · Henry Wang
Signed-off-by Henry Wang <[email protected]>---
CHANGELOG.md | 2 +-1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 7 lines
Acked-by Christian Lindig <[email protected]>Hi Henry,
The changes don’t seem to be specific to the OCaml
tools/part that I care about and so not sure if you were looking for an an Ack but happy to provide for this and your 2 other CHANGELOG patches.
Thank you very much! I will keep your ack for this patch.
For the other two, I might be wrong but I think you only need to raise your concerns and objections about the patches if you have any. Thanks :)
Kind regards,
Henry
Quoted 2 lines
— C
PATCH 2/3 CHANGELOG: Add missing entries for work during the 4.17 release
In reply to Henry Wang--- CHANGELOG.md | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-)
CHANGELOG.md +27 -2
@@ -4,16 +4,41 @@ Notable changes to Xen will be documented in this file. The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) -## [unstable UNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - TBD +## [4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - 2022-11-?? ### Changed - On x86 "vga=current" can now be used together with GrUB2's gfxpayload setting. Note that this requires use of "multiboot2" (and "module2") as the GrUB commands loading Xen. + - The "gnttab" option now has a new command line sub-option for disabling the + GNTTABOP_transfer functionality. + - The x86 MCE command line option info is now updated. ### Added / support upgraded + - Out-of-tree builds for the hypervisor now supported. + - The project has officially adopted 4 directives and 24 rules of MISRA-C, + added MISRA-C checker build integration, and defined how to document + deviations. - IOMMU superpage support on x86, affecting PV guests as well as HVM/PVH ones when they don't share page tables with the CPU (HAP / EPT / NPT). - - Support VIRT_SSBD feature for HVM guests on AMD. + - Support VIRT_SSBD feature for HVM guests on AMD and MSR_SPEC_CTRL feature for + SVM guests. + - Improved TSC, CPU frequency calibration and APIC on x86. + - Improved support for CET Indirect Branch Tracking on x86. + - Improved mwait-idle support for SPR and ADL on x86. + - Extend security support for hosts to 12 TiB of memory on x86. + - Add command line option to set cpuid parameters for dom0 at boot time on x86. + - Improved static configuration options on Arm. + - cpupools can be specified at boot using device tree on Arm. + - It is possible to use PV drivers with dom0less guests, allowing statically + booted dom0less guests with PV devices. + - On Arm, p2m structures are now allocated out of a pool of memory set aside at + domain creation. + - Improved mitigations against Spectre-BHB on Arm. + - Add support for VirtIO toolstack on Arm. + - Allow setting the number of CPUs to activate at runtime from command line + option on Arm. + - Improved toolstack build system. + - Add Xue - console over USB 3 Debug Capability. ### Removed / support downgraded - dropped support for the (x86-only) "vesa-mtrr" and "vesa-remap" command line options
Signature · 1 line
2.25.1
Re: [PATCH 2/3] CHANGELOG: Add missing entries for work during the 4.17 release
(reducing the Cc list to just xen-devel@)
CHANGELOG.md Notable changes to Xen will be documented in this file. · line 25
Quoted 11 lines · Henry Wang
### Added / support upgraded
+ - Out-of-tree builds for the hypervisor now supported.
+ - The project has officially adopted 4 directives and 24 rules of MISRA-C,CHANGELOG.md +5
-1+ added MISRA-C checker build integration, and defined how to document + deviations. - IOMMU superpage support on x86, affecting PV guests as well as HVM/PVH ones when they don't share page tables with the CPU (HAP / EPT / NPT). - - Support VIRT_SSBD feature for HVM guests on AMD. + - Support VIRT_SSBD feature for HVM guests on AMD and MSR_SPEC_CTRL feature for + SVM guests. + - Improved TSC, CPU frequency calibration and APIC on x86.
Maybe better "Improved TSC, CPU, and APIC clock frequency calibration on x86"?
Quoted 2 lines
+ - Improved support for CET Indirect Branch Tracking on x86.
+ - Improved mwait-idle support for SPR and ADL on x86.
SPR and ADL support is new in the driver, not improved.
Jan
RE: [PATCH 2/3] CHANGELOG: Add missing entries for work during the 4.17 release
Hi Jan,
Quoted 5 lines
-----Original Message-----
Subject: Re: [PATCH 2/3] CHANGELOG: Add missing entries for work during the 4.17 release(reducing the Cc list to just xen-devel@)
Thanks for doing this :) I was just not sure who would be interested in the series.
Quoted 12 lines · Henry Wang
CHANGELOG.md Notable changes to Xen will be documented in this file.
Quoted 6 lines
### Added / support upgraded
+ - Out-of-tree builds for the hypervisor now supported.
+ - The project has officially adopted 4 directives and 24 rules of MISRA-C,CHANGELOG.md +2
-0+ added MISRA-C checker build integration, and defined how to document + deviations. - IOMMU superpage support on x86, affecting PV guests as well asHVM/PVH ones
Quoted 3 lines
when they don't share page tables with the CPU (HAP / EPT / NPT).
- - SupportVIRT_SSBDfeature for HVM guests on AMD.
+ - SupportVIRT_SSBDfeature for HVM guests on AMD and
Quoted 6 lines
MSR_SPEC_CTRLfeature forQuoted 2 lines
+ SVM guests.
+ - Improved TSC, CPU frequency calibration and APIC on x86.Maybe better "Improved TSC, CPU, and APIC clock frequency calibration on x86"?
Thanks for your feedback for this and my previous email. They are really useful.
Yes of course, I guess I misunderstood the original series and thought there is another improvement for the APIC.
Quoted 5 lines
Quoted 3 lines
+ - Improved support for CET Indirect Branch Tracking on x86.
+ - Improved mwait-idle support for SPR and ADL on x86.SPR and ADL support is new in the driver, not improved.
I will correct this in V2.
Another question for adding another entry for x86 that worth to brag about a little bit: I did another dig into patchwork and found that this [1] might be a good candidate. IIUC __ro_after_init is a good feature that both x86 and Arm have leveraged in different level today, so probably the __ro_after_init might worth an entry in CHANGELOG.
However I saw your comments in [1] so I am not really sure if you are happy with that, maybe we need to change the wording a little bit to remove your concern? Would you mind sharing some thoughts?
Thanks!
[1] https://patchwork.kernel.org/project/xen-devel/patch/[email protected]/
Kind regards,
Henry
Quoted 2 lines
Jan
Re: [PATCH 2/3] CHANGELOG: Add missing entries for work during the 4.17 release
Quoted 9 lines · Henry Wang
Another question for adding another entry for x86 that worth to brag about a little bit: I did another dig into patchwork and found that this [1] might be a good candidate. IIUC
__ro_after_initis a good feature that both x86 and Arm have leveraged in different level today, so probably the__ro_after_initmight worth an entry in CHANGELOG.However I saw your comments in [1] so I am not really sure if you are happy with that, maybe we need to change the wording a little bit to remove your concern? Would you mind sharing some thoughts?
My view hasn't changed, but if Andrew and Roger think this should be mentioned, then I'm not going to stand in the way.
Jan
Quoted 6 lines
[1] https://patchwork.kernel.org/project/xen-devel/patch/[email protected]/
Kind regards,
HenryQuoted 2 lines
Jan
RE: [PATCH 2/3] CHANGELOG: Add missing entries for work during the 4.17 release
Hi Jan,
Quoted 8 lines
-----Original Message-----
Quoted 6 lines · Henry Wang
Another question for adding another entry for x86 that worth to brag about a little bit: I did another dig into patchwork and found that this [1] might be a good candidate. IIUC
__ro_after_initis a good feature that both x86 and Arm have leveraged in different level today, so probably the__ro_after_initmight worth an entry in CHANGELOG.
Quoted 7 lines
Quoted 3 lines
However I saw your comments in [1] so I am not really sure if you are happy with that, maybe we need to change the wording a little bit to remove your concern? Would you mind sharing some thoughts?
My view hasn't changed, but if Andrew and Roger think this should be mentioned,
then I'm not going to stand in the way.
Thanks for the confirmation. I will wait for Roger's back on next Monday then.
Kind regards,
Henry
Quoted 10 lines
Jan
Quoted 1 line
devel/patch/[email protected]/
Quoted 5 lines
Kind regards,
HenryQuoted 2 lines
Jan
RE: [PATCH 2/3] CHANGELOG: Add missing entries for work during the 4.17 release
Hi Roger,
Quoted 18 lines
-----Original Message-----
Subject: RE: [PATCH 2/3] CHANGELOG: Add missing entries for work during the 4.17 releaseHi Jan,
Quoted 12 lines
-----Original Message-----
Quoted 9 lines · Henry Wang
Another question for adding another entry for x86 that worth to brag about a little bit: I did another dig into patchwork and found that this [1] might be a good candidate. IIUC
__ro_after_initis a good feature that both x86 and Arm have leveraged in different level today, so probably the__ro_after_initmight worth an entry in CHANGELOG.However I saw your comments in [1] so I am not really sure if you are happy with that, maybe we need to change the wording a little bit to remove your concern? Would you mind sharing some thoughts?
Quoted 6 lines
Quoted 3 lines
My view hasn't changed, but if Andrew and Roger think this should be mentioned,
then I'm not going to stand in the way.Thanks for the confirmation. I will wait for Roger's back on next Monday then.
Sorry I forgot to add you to the thread in last email, could you please share Your opinion about this one? Thanks.
Kind regards,
Henry
Re: [PATCH 2/3] CHANGELOG: Add missing entries for work during the 4.17 release
In reply to Henry WangOn Fri, Nov 11, 2022 at 11:23 AM Henry Wang <[email protected]> wrote:
Hello Henry
[leave only [email protected] in CC]
[sorry for the possible format issues]
Quoted 50 lines
--- CHANGELOG.md | 29 +++++++++++++++++++++++++++-- 1 file changed, 27 insertions(+), 2 deletions(-)CHANGELOG.md +0
-1@@ -4,16 +4,41 @@ Notable changes to Xen will be documented in this file. The format is based on [Keep a Changelog]( https://keepachangelog.com/en/1.0.0/) -## [unstable UNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - TBD +## [4.17.0](
https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - 2022-11-??### Changed
- On x86 "vga=current" can now be used together with GrUB2's gfxpayload
setting. Note that
this requires use of "multiboot2" (and "module2") as the GrUB commands
loading Xen.
+ - The "gnttab" option now has a new command line sub-option for disabling the
+GNTTABOP_transferfunctionality.
+ - The x86 MCE command line option info is now updated.### Added / support upgraded
+ - Out-of-tree builds for the hypervisor now supported.
+ - The project has officially adopted 4 directives and 24 rules of MISRA-C,CHANGELOG.md +2
-0+ added MISRA-C checker build integration, and defined how to document + deviations. - IOMMU superpage support on x86, affecting PV guests as well as HVM/PVHones
when they don't share page tables with the CPU (HAP / EPT / NPT).
- - SupportVIRT_SSBDfeature for HVM guests on AMD.
+ - SupportVIRT_SSBDfeature for HVM guests on AMD andMSR_SPEC_CTRLfeature for
+ SVM guests.
+ - Improved TSC, CPU frequency calibration and APIC on x86.
+ - Improved support for CET Indirect Branch Tracking on x86.
+ - Improved mwait-idle support for SPR and ADL on x86.
+ - Extend security support for hosts to 12 TiB of memory on x86.
+ - Add command line option to set cpuid parameters for dom0 at boot time on x86.
+ - Improved static configuration options on Arm.
+ - cpupools can be specified at boot using device tree on Arm.
Quoted 9 lines
+ - It is possible to use PV drivers with dom0less guests, allowing statically
+ booted dom0less guests with PV devices.
+ - On Arm, p2m structures are now allocated out of a pool of memory set aside at
+ domain creation.
+ - Improved mitigations against Spectre-BHB on Arm.
+ - Add support for VirtIO toolstack on Arm.
I would clarify that only virtio-mmio is supported on Arm.
Quoted 6 lines
+ - Allow setting the number of CPUs to activate at runtime from command line
+ option on Arm.
+ - Improved toolstack build system.
+ - Add Xue - console over USB 3 Debug Capability.
I would probably also add the following:
- Add Renesas R-Car Gen4 IPMMU-VMSA support (Arm)
- grant-table support on Arm was improved and hardened by implementing “simplified M2P-like
approach for the xenheap pages”
Quoted 9 lines
### Removed / support downgraded
- dropped support for the (x86-only) "vesa-mtrr" and "vesa-remap"
command line options
--
2.25.1
Signature · 3 lines
Regards, Oleksandr Tyshchenko
RE: [PATCH 2/3] CHANGELOG: Add missing entries for work during the 4.17 release
Hi Oleksandr,
(+ Arm maintainers for a question)
Please see below inline comments (I somehow cannot reply as plain text for this email).
+ - Add support for VirtIO toolstack on Arm.
I would clarify that only virtio-mmio is supported on Arm.
(Henry): Sure, will clarify that.
+ - Allow setting the number of CPUs to activate at runtime from command line
+ option on Arm.
+ - Improved toolstack build system.
+ - Add Xue - console over USB 3 Debug Capability.
I would probably also add the following:
- Add Renesas R-Car Gen4 IPMMU-VMSA support (Arm)
(Henry): If something from a specific vendor needs to be included, I wonder if “add i.MX lpuart and i.MX8QM initial support” also qualify. I will let Arm maintainers to do the final call here. Hope you would be fine with that.
- grant-table support on Arm was improved and hardened by implementing “simplified M2P-like approach for the xenheap pages”
(Henry): Sure, I will add this.
Kind regards,
Henry
RE: [PATCH 2/3] CHANGELOG: Add missing entries for work during the 4.17 release
Quoted 6 lines · Henry Wang
- Add Renesas R-Car Gen4 IPMMU-VMSA support (Arm)
(Henry): If something from a specific vendor needs to be included, I wonder if “add i.MX lpuart and i.MX8QM initial support” also qualify. I will let Arm maintainers to do the final call here. Hope you would be fine with that.
Yes I think that's fine to add things from a specific vendor, including i.MX related stuff
PATCH 3/3 CHANGELOG: Start new "unstable" section
In reply to Henry Wang--- CHANGELOG.md | 2 ++ 1 file changed, 2 insertions(+)
CHANGELOG.md +2 -0
@@ -4,6 +4,8 @@ Notable changes to Xen will be documented in this file. The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) +## [unstable UNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - TBD + ## [4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - 2022-11-?? ### Changed
Signature · 1 line
2.25.1
Re: [PATCH 3/3] CHANGELOG: Start new "unstable" section
Hi Henry,
Quoted 1 line · Henry Wang
Signed-off-by Henry Wang <[email protected]>
CHANGELOG.md Notable changes to Xen will be documented in this file. · line 7
Quoted 13 lines
--- CHANGELOG.md | 2 ++ 1 file changed, 2 insertions(+)CHANGELOG.md +1
-0@@ -4,6 +4,8 @@ Notable changes to Xen will be documented in this file. The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/) +## [unstable UNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - TBD
AFAICT, this patch should only be merged after we branched for 4.17.
CHANGELOG.md Notable changes to Xen will be documented in this file. · line 11
Quoted 4 lines
CHANGELOG.md +1
-0+ ## [4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - 2022-11-?? ### Changed
Cheers,
Signature · 1 line
Julien Grall
RE: [PATCH 3/3] CHANGELOG: Start new "unstable" section
Hi Julien,
Quoted 9 lines
-----Original Message-----
Subject: Re: [PATCH 3/3] CHANGELOG: Start new "unstable" sectionHi Henry,
Quoted 1 line · Henry Wang
Signed-off-by Henry Wang <[email protected]>Acked-by Julien Grall <[email protected]>
Thanks very much!
Quoted 11 lines
Quoted 11 lines
--- CHANGELOG.md | 2 ++ 1 file changed, 2 insertions(+)CHANGELOG.md +0
-0@@ -4,6 +4,8 @@ Notable changes to Xen will be documented in this file.
Quoted 8 lines
CHANGELOG.md Notable changes to Xen will be documented in this file. · line 5
Quoted 1 line
CHANGELOG.md +0
-0The format is based on [Keep aChangelog](https://keepachangelog.com/en/1.0.0/)
CHANGELOG.md Notable changes to Xen will be documented in this file. · line 6
Quoted 2 lines
CHANGELOG.md +1
-0+## [unstableUNRELEASED](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=stagin
g) - TBDAFAICT, this patch should only be merged after we branched for 4.17.
Yes I fully agree. I was just starting early in case I forgot this or some unexpected stuff...
Kind regards,
Henry
Quoted 12 lines
CHANGELOG.md Notable changes to Xen will be documented in this file. · line 8
Quoted 3 lines
CHANGELOG.md +1
-0+ ##[4.17.0](https://xenbits.xen.org/gitweb/?p=xen.git;a=shortlog;h=staging) - 2022-11-??
CHANGELOG.md Notable changes to Xen will be documented in this file. · line 11
Quoted 2 lines
CHANGELOG.md +0
-0### ChangedCheers,
--
Julien Grall