stm32: enable logging features
Subsystems (21)
cover stm32: enable logging features
This patch-set migrates several stm32 drivers to API compatible with logging features (use dev_...() or log_...() function) and activate the logging features in STM32MP15 boards.
The size of U-Boot increased by 19kB (933026 to 952830 on STM32MP157C-EV1 board for basic defconfig) but the boot time don't change drastically.
For example on STM32MP157C-EV1 board:
1/ Before LOG patchset
Timer summary in microseconds (12 records):
Mark Elapsed Stage
0 0 reset
224,514 224,514 SPL
961,170 736,656 end SPL
964,006 2,836 board_init_f
1,186,986 222,980 board_init_r
1,651,379 464,393 id=64
1,674,463 23,084 id=65
1,675,164 701 main_loop
4,025,806 2,350,642 id=175Accumulated time:
55,064 dm_f
66,749 dm_r
88,796 dm_spl2/ With LOG activated (after this patchset)
Timer summary in microseconds (12 records):
Mark Elapsed Stage
0 0 reset
227,142 227,142 SPL
984,585 757,443 end SPL
987,579 2,994 board_init_f
1,210,091 222,512 board_init_r
1,673,354 463,263 id=64
1,696,073 22,719 id=65
1,696,775 702 main_loop
5,443,104 3,746,329 id=175Accumulated time:
62,154 dm_f
66,264 dm_r
89,376 dm_splFor information even with all trace embbeded in U-Boot but not activated, MAX_LOG_LEVEL=8 and LOG_DEFAULT_LEVEL=6
Size increase by 190KB (952830 to 1147918) but
boot time is stable (1,748s vs 1,696s).
STM32MP> bootstage report
Timer summary in microseconds (12 records):
Mark Elapsed Stage
0 0 reset
230,028 230,028 SPL
996,117 766,089 end SPL
999,082 2,965 board_init_f
1,220,225 221,143 board_init_r
1,718,641 498,416 id=64
1,746,096 27,455 id=65
1,748,202 2,106 main_loop
4,509,271 2,761,069 id=175Accumulated time:
58,481 dm_f
68,881 dm_r
89,385 dm_splPatrick Delaunay (33):
arm: stm32mp: migrate trace to log macro
arm: stm32mp: migrate cmd_stm32prog to log macro
arm: stm32mp: bsec: migrate trace to log macro
pinctrl: stm32: migrate trace to log macro
gpio: stm32-gpio: migrate trace to dev and log macro
remoproc: stm32: migrate trace to log macro
ram: stm32: migrate trace to log macro
ram: stm32mp1: migrate trace to dev or log macro
mmc: stm32_sdmmc2: migrate trace to dev and log macro
timer: stm32: migrate trace to log macro
hwspinlock: stm32: migrate trace to log macro
rtc: stm32: migrate trace to log macro
watchdog: stm32mp: migrate trace to dev macro
power: regulator: stm32-verfbuf: define LOG_CATEGORY
misc: rcc: migrate trace to dev macro
misc: rcc: keep the rcc device name for subnode
clk: stm32mp1: migrate trace to dev and log macro
clk: clk_stm32f: migrate trace to dev and log macro
clk: clk_stm32h7: migrate trace to dev and log macro
reset: stm32-reset: migrate trace to dev and log macro
mailbox: stm32-ipcc: migrate trace to dev and log macro
i2c: stm32f7_i2c: migrate trace to dev and log macro
phy: stm32-usbphyc: migrate trace to dev and log macro
spi: stm32_spi: migrate trace to dev and log macro
spi: stm32_qspi: migrate trace to dev and log macro
mtd: stm32_fmc2: migrate trace to dev and log macro
memory: stm32-fmc2: migrate trace to dev and log macro
serial: stm32: define LOG_CATEGORY
video: stm32_ltdc: migrate trace to dev and log macro
video: stm32_dsi: migrate trace to dev and log macro
board: st: stm32mp1: migrate trace to dev and log macro
board: st: common: migrate trace to dev and log macro
configs: stm32mp15: enable LOG features
arch/arm/mach-stm32mp/boot_params.c | 8 +- arch/arm/mach-stm32mp/bsec.c | 38 +++-- arch/arm/mach-stm32mp/cmd_stm32key.c | 3 +- .../cmd_stm32prog/cmd_stm32prog.c | 4 +- .../mach-stm32mp/cmd_stm32prog/stm32prog.c | 112 ++++++------- .../mach-stm32mp/cmd_stm32prog/stm32prog.h | 2 +- .../cmd_stm32prog/stm32prog_serial.c | 24 +-- .../cmd_stm32prog/stm32prog_usb.c | 14 +- arch/arm/mach-stm32mp/cpu.c | 18 ++- arch/arm/mach-stm32mp/dram_init.c | 8 +- arch/arm/mach-stm32mp/fdt.c | 17 +- arch/arm/mach-stm32mp/pwr_regulator.c | 2 + arch/arm/mach-stm32mp/spl.c | 16 +- board/st/common/stm32mp_dfu.c | 3 +- board/st/common/stm32mp_mtdparts.c | 5 +- board/st/common/stpmic1.c | 5 +- board/st/common/stusb160x.c | 2 + board/st/stm32mp1/stm32mp1.c | 134 ++++++++-------- configs/stm32mp15_basic_defconfig | 2 + configs/stm32mp15_trusted_defconfig | 1 + drivers/clk/clk_stm32f.c | 39 ++--- drivers/clk/clk_stm32h7.c | 70 +++++---- drivers/clk/clk_stm32mp1.c | 147 +++++++++--------- drivers/gpio/stm32_gpio.c | 4 +- drivers/hwspinlock/stm32_hwspinlock.c | 2 + drivers/i2c/stm32f7_i2c.c | 74 ++++----- drivers/mailbox/stm32-ipcc.c | 16 +- drivers/memory/stm32-fmc2-ebi.c | 30 ++-- drivers/misc/stm32_rcc.c | 10 +- drivers/mmc/stm32_sdmmc2.c | 85 +++++----- drivers/mtd/nand/raw/stm32_fmc2_nand.c | 40 +++-- drivers/phy/phy-stm32-usbphyc.c | 18 ++- drivers/pinctrl/pinctrl_stm32.c | 30 ++-- drivers/power/regulator/stm32-vrefbuf.c | 2 + drivers/ram/stm32_sdram.c | 10 +- drivers/ram/stm32mp1/stm32mp1_ddr.c | 36 +++-- drivers/ram/stm32mp1/stm32mp1_interactive.c | 4 +- drivers/ram/stm32mp1/stm32mp1_ram.c | 37 +++-- drivers/ram/stm32mp1/stm32mp1_tests.c | 19 ++- drivers/ram/stm32mp1/stm32mp1_tuning.c | 124 +++++++-------- drivers/remoteproc/stm32_copro.c | 3 +- drivers/reset/stm32-reset.c | 13 +- drivers/rtc/stm32_rtc.c | 3 + drivers/serial/serial_stm32.c | 3 + drivers/spi/stm32_qspi.c | 46 +++--- drivers/spi/stm32_spi.c | 31 ++-- drivers/timer/stm32_timer.c | 2 + drivers/video/stm32/stm32_dsi.c | 18 ++- drivers/video/stm32/stm32_ltdc.c | 33 ++-- drivers/watchdog/stm32mp_wdt.c | 9 +- 50 files changed, 731 insertions(+), 645 deletions(-)
Signature · 1 line
2.17.1
PATCH 1/33 arm: stm32mp: migrate trace to log macro
Change debug and pr_ macro to log macro and define LOG_CATEGORY.
---
arch/arm/mach-stm32mp/boot_params.c | 8 +++++--- arch/arm/mach-stm32mp/cmd_stm32key.c | 3 ++- arch/arm/mach-stm32mp/cpu.c | 18 ++++++++++-------- arch/arm/mach-stm32mp/dram_init.c | 8 +++++--- arch/arm/mach-stm32mp/fdt.c | 17 ++++++++++------- arch/arm/mach-stm32mp/pwr_regulator.c | 2 ++ arch/arm/mach-stm32mp/spl.c | 16 +++++++++------- 7 files changed, 43 insertions(+), 29 deletions(-)
arch/arm/mach-stm32mp/boot_params.c +5 -3
@@ -3,6 +3,8 @@* Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY LOGC_ARCH +#include <common.h> #include <log.h> #include <asm/sections.h>
@@ -32,15 +34,15 @@ void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2,*/ void *board_fdt_blob_setup (void ) { -debug ("%s: nt_fw_dtb=%lx\n" , __func__, nt_fw_dtb); +log_debug ("%s: nt_fw_dtb=%lx\n" , __func__, nt_fw_dtb);/* use external device tree only if address is valid */ if (nt_fw_dtb >=STM32_DDR_BASE ) {if (fdt_magic (nt_fw_dtb) ==FDT_MAGIC )return (void *)nt_fw_dtb; -debug ("%s: DTB not found.\n" , __func__); +log_debug ("%s: DTB not found.\n" , __func__); } -debug ("%s: fall back to builtin DTB, %p\n" , __func__, &_end); +log_debug ("%s: fall back to builtin DTB, %p\n" , __func__, &_end);return (void *)&_end; }
arch/arm/mach-stm32mp/cmd_stm32key.c +2 -1
@@ -6,6 +6,7 @@#include <common.h> #include <command.h> #include <console.h> +#include <log.h> #include <misc.h> #include <dm/device.h> #include <dm/uclass.h>
@@ -34,7 +35,7 @@ static void fuse_hash_value(u32 addr, bool print)DM_GET_DRIVER (stm32mp_bsec), &dev);if (ret) { -pr_err ("Can't find stm32mp_bsec driver\n" ); +log_err ("Can't find stm32mp_bsec driver\n" );return ; }
arch/arm/mach-stm32mp/cpu.c +10 -8
@@ -2,6 +2,9 @@/* * Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ + +#define LOG_CATEGORY LOGC_ARCH +#include <common.h> #include <clk.h> #include <cpu_func.h>
@@ -462,8 +465,8 @@ static void setup_boot_mode(void)struct udevice *dev;int alias; -pr_debug ("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d forced=%x\n" , - __func__, boot_ctx, boot_mode, instance, forced_mode); +log_debug ("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d forced=%x\n" , + __func__, boot_ctx, boot_mode, instance, forced_mode);switch (boot_mode &TAMP_BOOT_DEVICE_MASK ) {case BOOT_SERIAL_UART :if (instance >ARRAY_SIZE (serial_addr))
@@ -509,7 +512,7 @@ static void setup_boot_mode(void)env_set ("boot_instance" ,"0" );break ;default : -pr_debug ("unexpected boot mode = %x\n" , boot_mode); +log_debug ("unexpected boot mode = %x\n" , boot_mode);break ; }
@@ -536,7 +539,7 @@ static void setup_boot_mode(void)case BOOT_NORMAL :break ;default : -pr_debug ("unexpected forced boot mode = %x\n" , forced_mode); +log_debug ("unexpected forced boot mode = %x\n" , forced_mode);break ; }
@@ -576,14 +579,13 @@ __weak int setup_mac_address(void) enetaddr[i] = ((uint8_t *)&otp)[i];if (!is_valid_ethaddr (enetaddr)) { -pr_err ("invalid MAC address in OTP %pM\n" , enetaddr); +log_err ("invalid MAC address in OTP %pM\n" , enetaddr);return -EINVAL ; } -pr_debug ("OTP MAC address = %pM\n" , enetaddr); +log_debug ("OTP MAC address = %pM\n" , enetaddr); ret =eth_env_set_enetaddr ("ethaddr" , enetaddr);if (ret) -pr_err ("Failed to set mac address %pM from OTP: %d\n" , - enetaddr, ret); +log_err ("Failed to set mac address %pM from OTP: %d\n" , enetaddr, ret);#endif return 0 ;
arch/arm/mach-stm32mp/dram_init.c +5 -3
@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY LOGC_ARCH +#include <common.h> #include <dm.h> #include <image.h>
@@ -21,15 +23,15 @@ int dram_init(void) ret =uclass_get_device (UCLASS_RAM ,0 , &dev);if (ret) { -debug ("RAM init failed: %d\n" , ret); +log_debug ("RAM init failed: %d\n" , ret);return ret; } ret =ram_get_info (dev, &ram);if (ret) { -debug ("Cannot get RAM size: %d\n" , ret); +log_debug ("Cannot get RAM size: %d\n" , ret);return ret; } -debug ("RAM init base=%lx, size=%x\n" , ram.base, ram.size); +log_debug ("RAM init base=%lx, size=%x\n" , ram.base, ram.size); gd->ram_size = ram.size;
arch/arm/mach-stm32mp/fdt.c +10 -7
@@ -3,6 +3,8 @@* Copyright (C) 2019-2020, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY LOGC_ARCH +#include <common.h> #include <fdt_support.h> #include <log.h>
@@ -172,15 +174,15 @@ static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node) status = (decprot[offset] >> shift) &DECPROT_MASK ; addr = array[i]; -debug ("ETZPC: 0x%08x decprot %d=%d\n" , addr, i, status); +log_debug ("ETZPC: 0x%08x decprot %d=%d\n" , addr, i, status);if (addr ==ETZPC_RESERVED || status ==DECPROT_NON_SECURED )continue ;if (fdt_disable_subnode_by_address (fdt, soc_node, addr)) -printf ("ETZPC: 0x%08x node disabled, decprot %d=%d\n" , - addr, i, status); +log_notice ("ETZPC: 0x%08x node disabled, decprot %d=%d\n" , + addr, i, status); }return 0 ;
@@ -194,7 +196,7 @@ static void stm32_fdt_fixup_cpu(void *blob, char *name) off =fdt_path_offset (blob,"/cpus" );if (off <0 ) { -printf ("%s: couldn't find /cpus node\n" , __func__); +log_warning ("%s: couldn't find /cpus node\n" , __func__);return ; }
@@ -203,7 +205,8 @@ static void stm32_fdt_fixup_cpu(void *blob, char *name) reg =fdtdec_get_addr (blob, off,"reg" );if (reg !=0 ) {fdt_del_node (blob, off); -printf ("FDT: cpu %d node remove for %s\n" , reg, name); +log_notice ("FDT: cpu %d node remove for %s\n" , + reg, name);/* after delete we can't trust the offsets anymore */ off =-1 ; }
@@ -216,8 +219,8 @@ static void stm32_fdt_disable(void *fdt, int offset, u32 addr, const char *string, const char *name) { if (fdt_disable_subnode_by_address(fdt, offset, addr)) - printf("FDT: %s@%08x node disabled for %s\n", - string, addr, name); + log_notice("FDT: %s@%08x node disabled for %s\n", + string, addr, name); }static void stm32_fdt_disable_optee (void *blob)
arch/arm/mach-stm32mp/pwr_regulator.c +2 -0
@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_REGULATOR +#include <common.h> #include <dm.h> #include <errno.h>
arch/arm/mach-stm32mp/spl.c +9 -7
@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY LOGC_ARCH +#include <common.h> #include <cpu_func.h> #include <dm.h>
@@ -78,7 +80,7 @@ void spl_display_print(void)*/ model =fdt_getprop (gd->fdt_blob,0 ,"model" ,NULL );if (model) - printf("Model: %s\n", model); + log_info("Model: %s\n", model); }#endif
@@ -96,25 +98,25 @@ void board_init_f(ulong dummy) ret =spl_early_init ();if (ret) { -debug ("spl_early_init() failed: %d\n" , ret); +log_debug ("spl_early_init() failed: %d\n" , ret);hang (); } ret =uclass_get_device (UCLASS_CLK ,0 , &dev);if (ret) { -debug ("Clock init failed: %d\n" , ret); +log_debug ("Clock init failed: %d\n" , ret);hang (); } ret =uclass_get_device (UCLASS_RESET ,0 , &dev);if (ret) { -debug ("Reset init failed: %d\n" , ret); +log_debug ("Reset init failed: %d\n" , ret);hang (); } ret =uclass_get_device (UCLASS_PINCTRL ,0 , &dev);if (ret) { -debug ("%s: Cannot find pinctrl device\n" , __func__); +log_debug ("%s: Cannot find pinctrl device\n" , __func__);hang (); }
@@ -123,13 +125,13 @@ void board_init_f(ulong dummy) ret =board_early_init_f ();if (ret) { -debug ("board_early_init_f() failed: %d\n" , ret); +log_debug ("board_early_init_f() failed: %d\n" , ret);hang (); } ret =uclass_get_device (UCLASS_RAM ,0 , &dev);if (ret) { -printf ("DRAM init failed: %d\n" , ret); +log_err ("DRAM init failed: %d\n" , ret);hang (); }
Signature · 1 line
2.17.1
PATCH 1/33 arm: stm32mp: migrate trace to log macro
Hi Patrick
Quoted 293 lines · Patrick Delaunay
Change debug and
pr_macro to log macro and defineLOG_CATEGORY.Signed-off-by Patrick Delaunay <[email protected]>---
arch/arm/mach-stm32mp/boot_params.c | 8 +++++--- arch/arm/mach-stm32mp/cmd_stm32key.c | 3 ++- arch/arm/mach-stm32mp/cpu.c | 18 ++++++++++-------- arch/arm/mach-stm32mp/dram_init.c | 8 +++++--- arch/arm/mach-stm32mp/fdt.c | 17 ++++++++++------- arch/arm/mach-stm32mp/pwr_regulator.c | 2 ++ arch/arm/mach-stm32mp/spl.c | 16 +++++++++------- 7 files changed, 43 insertions(+), 29 deletions(-)arch/arm/mach-stm32mp/boot_params.c +5
-3@@ -3,6 +3,8 @@* Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY LOGC_ARCH +#include <common.h> #include <log.h> #include <asm/sections.h> @@ -32,15 +34,15 @@ void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2,*/ void *board_fdt_blob_setup (void ) { -debug ("%s: nt_fw_dtb=%lx\n" , __func__, nt_fw_dtb); +log_debug ("%s: nt_fw_dtb=%lx\n" , __func__, nt_fw_dtb);/* use external device tree only if address is valid */ if (nt_fw_dtb >=STM32_DDR_BASE ) {if (fdt_magic (nt_fw_dtb) ==FDT_MAGIC )return (void *)nt_fw_dtb; -debug ("%s: DTB not found.\n" , __func__); +log_debug ("%s: DTB not found.\n" , __func__); } -debug ("%s: fall back to builtin DTB, %p\n" , __func__, &_end); +log_debug ("%s: fall back to builtin DTB, %p\n" , __func__, &_end);return (void *)&_end; }arch/arm/mach-stm32mp/cmd_stm32key.c +2
-1@@ -6,6 +6,7 @@#include <common.h> #include <command.h> #include <console.h> +#include <log.h> #include <misc.h> #include <dm/device.h> #include <dm/uclass.h> @@ -34,7 +35,7 @@ static void fuse_hash_value(u32 addr, bool print)DM_GET_DRIVER (stm32mp_bsec), &dev);if (ret) { -pr_err ("Can't find stm32mp_bsec driver\n" ); +log_err ("Can't find stm32mp_bsec driver\n" );return ; }arch/arm/mach-stm32mp/cpu.c +10
-8@@ -2,6 +2,9 @@/* * Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ + +#define LOG_CATEGORY LOGC_ARCH +#include <common.h> #include <clk.h> #include <cpu_func.h> @@ -462,8 +465,8 @@ static void setup_boot_mode(void)struct udevice *dev;int alias; -pr_debug ("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d forced=%x\n" , - __func__, boot_ctx, boot_mode, instance, forced_mode); +log_debug ("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d forced=%x\n" , + __func__, boot_ctx, boot_mode, instance, forced_mode);switch (boot_mode &TAMP_BOOT_DEVICE_MASK ) {case BOOT_SERIAL_UART :if (instance >ARRAY_SIZE (serial_addr))@@ -509,7 +512,7 @@ static void setup_boot_mode(void)env_set ("boot_instance" ,"0" );break ;default : -pr_debug ("unexpected boot mode = %x\n" , boot_mode); +log_debug ("unexpected boot mode = %x\n" , boot_mode);break ; }@@ -536,7 +539,7 @@ static void setup_boot_mode(void)case BOOT_NORMAL :break ;default : -pr_debug ("unexpected forced boot mode = %x\n" , forced_mode); +log_debug ("unexpected forced boot mode = %x\n" , forced_mode);break ; }@@ -576,14 +579,13 @@ __weak int setup_mac_address(void) enetaddr[i] = ((uint8_t *)&otp)[i];if (!is_valid_ethaddr (enetaddr)) { -pr_err ("invalid MAC address in OTP %pM\n" , enetaddr); +log_err ("invalid MAC address in OTP %pM\n" , enetaddr);return -EINVAL ; } -pr_debug ("OTP MAC address = %pM\n" , enetaddr); +log_debug ("OTP MAC address = %pM\n" , enetaddr); ret =eth_env_set_enetaddr ("ethaddr" , enetaddr);if (ret) -pr_err ("Failed to set mac address %pM from OTP: %d\n" , - enetaddr, ret); +log_err ("Failed to set mac address %pM from OTP: %d\n" , enetaddr, ret);#endif return 0 ;arch/arm/mach-stm32mp/dram_init.c +5
-3@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY LOGC_ARCH +#include <common.h> #include <dm.h> #include <image.h> @@ -21,15 +23,15 @@ int dram_init(void) ret =uclass_get_device (UCLASS_RAM ,0 , &dev);if (ret) { -debug ("RAM init failed: %d\n" , ret); +log_debug ("RAM init failed: %d\n" , ret);return ret; } ret =ram_get_info (dev, &ram);if (ret) { -debug ("Cannot get RAM size: %d\n" , ret); +log_debug ("Cannot get RAM size: %d\n" , ret);return ret; } -debug ("RAM init base=%lx, size=%x\n" , ram.base, ram.size); +log_debug ("RAM init base=%lx, size=%x\n" , ram.base, ram.size); gd->ram_size = ram.size;arch/arm/mach-stm32mp/fdt.c +10
-7@@ -3,6 +3,8 @@* Copyright (C) 2019-2020, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY LOGC_ARCH +#include <common.h> #include <fdt_support.h> #include <log.h> @@ -172,15 +174,15 @@ static int stm32_fdt_fixup_etzpc(void *fdt, int soc_node) status = (decprot[offset] >> shift) &DECPROT_MASK ; addr = array[i]; -debug ("ETZPC: 0x%08x decprot %d=%d\n" , addr, i, status); +log_debug ("ETZPC: 0x%08x decprot %d=%d\n" , addr, i, status);if (addr ==ETZPC_RESERVED || status ==DECPROT_NON_SECURED )continue ;if (fdt_disable_subnode_by_address (fdt, soc_node, addr)) -printf ("ETZPC: 0x%08x node disabled, decprot %d=%d\n" , - addr, i, status); +log_notice ("ETZPC: 0x%08x node disabled, decprot %d=%d\n" , + addr, i, status); }return 0 ;@@ -194,7 +196,7 @@ static void stm32_fdt_fixup_cpu(void *blob, char *name) off =fdt_path_offset (blob,"/cpus" );if (off <0 ) { -printf ("%s: couldn't find /cpus node\n" , __func__); +log_warning ("%s: couldn't find /cpus node\n" , __func__);return ; }@@ -203,7 +205,8 @@ static void stm32_fdt_fixup_cpu(void *blob, char *name) reg =fdtdec_get_addr (blob, off,"reg" );if (reg !=0 ) {fdt_del_node (blob, off); -printf ("FDT: cpu %d node remove for %s\n" , reg, name); +log_notice ("FDT: cpu %d node remove for %s\n" , + reg, name);/* after delete we can't trust the offsets anymore */ off =-1 ; }@@ -216,8 +219,8 @@ static void stm32_fdt_disable(void *fdt, int offset, u32 addr, const char *string, const char *name) { if (fdt_disable_subnode_by_address(fdt, offset, addr)) - printf("FDT: %s@%08x node disabled for %s\n", - string, addr, name); + log_notice("FDT: %s@%08x node disabled for %s\n", + string, addr, name); }static void stm32_fdt_disable_optee (void *blob)arch/arm/mach-stm32mp/pwr_regulator.c +2
-0@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_REGULATOR +#include <common.h> #include <dm.h> #include <errno.h> arch/arm/mach-stm32mp/spl.c +8
-6@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY LOGC_ARCH +#include <common.h> #include <cpu_func.h> #include <dm.h> @@ -78,7 +80,7 @@ void spl_display_print(void)*/ model =fdt_getprop (gd->fdt_blob,0 ,"model" ,NULL );if (model) - printf("Model: %s\n", model); + log_info("Model: %s\n", model); }#endif @@ -96,25 +98,25 @@ void board_init_f(ulong dummy) ret =spl_early_init ();if (ret) { -debug ("spl_early_init() failed: %d\n" , ret); +log_debug ("spl_early_init() failed: %d\n" , ret);hang (); } ret =uclass_get_device (UCLASS_CLK ,0 , &dev);if (ret) { -debug ("Clock init failed: %d\n" , ret); +log_debug ("Clock init failed: %d\n" , ret);hang (); } ret =uclass_get_device (UCLASS_RESET ,0 , &dev);if (ret) { -debug ("Reset init failed: %d\n" , ret); +log_debug ("Reset init failed: %d\n" , ret);hang (); } ret =uclass_get_device (UCLASS_PINCTRL ,0 , &dev);if (ret) { -debug ("%s: Cannot find pinctrl device\n" , __func__); +log_debug ("%s: Cannot find pinctrl device\n" , __func__);hang (); }@@ -123,13 +125,13 @@ void board_init_f(ulong dummy) ret =board_early_init_f ();if (ret) { -debug ("board_early_init_f() failed: %d\n" , ret); +log_debug ("board_early_init_f() failed: %d\n" , ret);
arch/arm/mach-stm32mp/spl.c void board_init_f(ulong dummy) · line 137
Quoted 10 lines
arch/arm/mach-stm32mp/spl.c +1
-1hang (); } ret =uclass_get_device (UCLASS_RAM ,0 , &dev);if (ret) { -printf ("DRAM init failed: %d\n" , ret); +log_err ("DRAM init failed: %d\n" , ret);hang (); }
Thanks
PATCH 2/33 arm: stm32mp: migrate cmd_stm32prog to log macro
In reply to Patrick DelaunayChange debug and pr_ macro to log macro.
---
.../cmd_stm32prog/cmd_stm32prog.c | 4 +- .../mach-stm32mp/cmd_stm32prog/stm32prog.c | 112 +++++++++--------- .../mach-stm32mp/cmd_stm32prog/stm32prog.h | 2 +- .../cmd_stm32prog/stm32prog_serial.c | 24 ++-- .../cmd_stm32prog/stm32prog_usb.c | 14 +-- 5 files changed, 78 insertions(+), 78 deletions(-)
arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c +2 -2
@@ -56,7 +56,7 @@ static int do_stm32prog(struct cmd_tbl *cmdtp, int flag, int argc, link =LINK_SERIAL ;if (link ==LINK_UNDEFINED ) { -pr_err ("not supported link=%s\n" , argv[1 ]); +log_err ("not supported link=%s\n" , argv[1 ]);return CMD_RET_USAGE ; }
@@ -90,7 +90,7 @@ static int do_stm32prog(struct cmd_tbl *cmdtp, int flag, int argc, data = (struct stm32prog_data *)malloc (sizeof (*data));if (!data) { -pr_err ("Alloc failed." ); +log_err ("Alloc failed." );return CMD_RET_FAILURE ; } stm32prog_data = data;
arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c +56 -56
299 lines not on this page · raw message
arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h +1 -1
@@ -172,7 +172,7 @@ char *stm32prog_get_error(struct stm32prog_data *data);if (data->phase !=PHASE_RESET ) { \sprintf (data->error, args); \ data->phase =PHASE_RESET ; \ -pr_err ("Error: %s\n" , data->error); } \ +log_err ("Error: %s\n" , data->error); } \ }/* Main function */
arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c +12 -12
@@ -159,8 +159,8 @@ static int stm32prog_read(struct stm32prog_data *data, u8 phase, u32 offset, dfu_entity->offset = offset; data->offset = offset; data->read_phase = phase; -pr_debug ("\nSTM32 download read %s offset=0x%x\n" , - dfu_entity->name, offset); +log_debug ("\nSTM32 download read %s offset=0x%x\n" , + dfu_entity->name, offset); ret =dfu_read (dfu_entity, buffer, buffer_size, dfu_entity->i_blk_seq_num);if (ret <0 ) {
@@ -198,7 +198,7 @@ int stm32prog_serial_init(struct stm32prog_data *data, int link_dev)sprintf (alias,"serial%d" , link_dev); path =fdt_get_alias (gd->fdt_blob, alias);if (!path) { -pr_err ("%s alias not found" , alias); +log_err ("%s alias not found" , alias);return -ENODEV ; } node =fdt_path_offset (gd->fdt_blob, path);
@@ -212,7 +212,7 @@ int stm32prog_serial_init(struct stm32prog_data *data, int link_dev) down_serial_dev = dev; }if (!down_serial_dev) { -pr_err ("%s = %s device not found" , alias, path); +log_err ("%s = %s device not found" , alias, path);return -ENODEV ; }
@@ -225,11 +225,11 @@ int stm32prog_serial_init(struct stm32prog_data *data, int link_dev) ops =serial_get_ops (down_serial_dev);if (!ops) { -pr_err ("%s = %s missing ops" , alias, path); +log_err ("%s = %s missing ops" , alias, path);return -ENODEV ; }if (!ops->setconfig) { -pr_err ("%s = %s missing setconfig" , alias, path); +log_err ("%s = %s missing setconfig" , alias, path);return -ENODEV ; }
@@ -815,7 +815,7 @@ static void download_command(struct stm32prog_data *data)if (data->cursor > image_header->image_length +BL_HEADER_SIZE ) { -pr_err ("expected size exceeded\n" ); +log_err ("expected size exceeded\n" ); result =ABORT_BYTE ; goto end; }
@@ -859,8 +859,8 @@ static void read_partition_command(struct stm32prog_data *data) rcv_data =stm32prog_serial_getc ();if (rcv_data != tmp_xor) { -pr_debug ("1st checksum received = %x, computed %x\n" , - rcv_data, tmp_xor); +log_debug ("1st checksum received = %x, computed %x\n" , + rcv_data, tmp_xor); goto error; }stm32prog_serial_putc (ACK_BYTE );
@@ -872,12 +872,12 @@ static void read_partition_command(struct stm32prog_data *data) rcv_data =stm32prog_serial_getc ();if ((rcv_data ^ tmp_xor) !=0xFF ) { -pr_debug ("2nd checksum received = %x, computed %x\n" , - rcv_data, tmp_xor); +log_debug ("2nd checksum received = %x, computed %x\n" , + rcv_data, tmp_xor); goto error; } -pr_debug ("%s : %x\n" , __func__, part_id); +log_debug ("%s : %x\n" , __func__, part_id); rcv_data =0 ;switch (part_id) {case PHASE_OTP :
arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c +7 -7
@@ -47,11 +47,11 @@ static int stm32prog_cmd_write(u64 offset, void *buf, long *len)int ret;if (*len <5 ) { -pr_err ("size not allowed\n" ); +log_err ("size not allowed\n" );return -EINVAL ; }if (offset) { -pr_err ("invalid offset\n" ); +log_err ("invalid offset\n" );return -EINVAL ; } phase = pt[0 ];
@@ -66,7 +66,7 @@ static int stm32prog_cmd_write(u64 offset, void *buf, long *len)/* set phase and offset */ ret =stm32prog_set_phase (stm32prog_data, phase, address);if (ret) -pr_err ("failed: %d\n" , ret); +log_err ("failed: %d\n" , ret);return ret; }
@@ -81,7 +81,7 @@ static int stm32prog_cmd_read(u64 offset, void *buf, long *len)int length;if (*len <PHASE_MIN_SIZE ) { -pr_err ("request exceeds allowed area\n" ); +log_err ("request exceeds allowed area\n" );return -EINVAL ; }if (offset) {
@@ -171,8 +171,8 @@ int stm32prog_get_medium_size_virt(struct dfu_entity *dfu, u64 *size) {if (dfu->dev_type !=DFU_DEV_VIRT ) { *size =0 ; -pr_debug ("%s, invalid dev_type = %d\n" , - __func__, dfu->dev_type); +log_debug ("%s, invalid dev_type = %d\n" , + __func__, dfu->dev_type);return -EINVAL ; }
@@ -227,6 +227,6 @@ bool stm32prog_usb_loop(struct stm32prog_data *data, int dev)int g_dnl_get_board_bcd_device_number (int gcnum) { -pr_debug ("%s\n" , __func__); +log_debug ("%s\n" , __func__);return 0x200 ; }
Signature · 1 line
2.17.1
PATCH 2/33 arm: stm32mp: migrate cmd_stm32prog to log macro
Hi Patrick
Quoted 507 lines · Patrick Delaunay
Change debug and
pr_macro to log macro.Signed-off-by Patrick Delaunay <[email protected]>---
.../cmd_stm32prog/cmd_stm32prog.c | 4 +- .../mach-stm32mp/cmd_stm32prog/stm32prog.c | 112 +++++++++--------- .../mach-stm32mp/cmd_stm32prog/stm32prog.h | 2 +- .../cmd_stm32prog/stm32prog_serial.c | 24 ++-- .../cmd_stm32prog/stm32prog_usb.c | 14 +-- 5 files changed, 78 insertions(+), 78 deletions(-)arch/arm/mach-stm32mp/cmd_stm32prog/cmd_stm32prog.c +2
-2@@ -56,7 +56,7 @@ static int do_stm32prog(struct cmd_tbl *cmdtp, int flag, int argc, link =LINK_SERIAL ;if (link ==LINK_UNDEFINED ) { -pr_err ("not supported link=%s\n" , argv[1 ]); +log_err ("not supported link=%s\n" , argv[1 ]);return CMD_RET_USAGE ; }@@ -90,7 +90,7 @@ static int do_stm32prog(struct cmd_tbl *cmdtp, int flag, int argc, data = (struct stm32prog_data *)malloc (sizeof (*data));if (!data) { -pr_err ("Alloc failed." ); +log_err ("Alloc failed." );return CMD_RET_FAILURE ; } stm32prog_data = data;arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c +56
-56@@ -97,28 +97,28 @@ u8 stm32prog_header_check(struct raw_header_s *raw_header, header->image_length =0x0 ;if (!raw_header || !header) { -pr_debug ("%s:no header data\n" , __func__); +log_debug ("%s:no header data\n" , __func__);return -1 ; }if (raw_header->magic_number != (('S' <<0 ) | ('T' <<8 ) | ('M' <<16 ) | (0x32 <<24 ))) { -pr_debug ("%s:invalid magic number : 0x%x\n" , - __func__, raw_header->magic_number); +log_debug ("%s:invalid magic number : 0x%x\n" , + __func__, raw_header->magic_number);return -2 ; }/* only header v1.0 supported */ if (raw_header->header_version !=0x00010000 ) { -pr_debug ("%s:invalid header version : 0x%x\n" , - __func__, raw_header->header_version); +log_debug ("%s:invalid header version : 0x%x\n" , + __func__, raw_header->header_version);return -3 ; }if (raw_header->reserved1 !=0x0 || raw_header->reserved2) { -pr_debug ("%s:invalid reserved field\n" , __func__); +log_debug ("%s:invalid reserved field\n" , __func__);return -4 ; }for (i =0 ; i < (sizeof (raw_header->padding) /4 ); i++) {if (raw_header->padding[i] !=0 ) { -pr_debug ("%s:invalid padding field\n" , __func__); +log_debug ("%s:invalid padding field\n" , __func__);return -5 ; } }@@ -376,7 +376,7 @@ static int parse_flash_layout(struct stm32prog_data *data, last = start + size; *last =0x0 ;/* force null terminated string */ -pr_debug ("flash layout =\n%s\n" , start); +log_debug ("flash layout =\n%s\n" , start);/* calculate expected number of partitions */ part_list_size =1 ;@@ -584,11 +584,11 @@ static int init_device(struct stm32prog_data *data, last_addr = (u64)(block_dev->lba -GPT_HEADER_SZ -1 ) * block_dev->blksz; } -pr_debug ("MMC %d: lba=%ld blksz=%ld\n" , dev->dev_id, - block_dev->lba, block_dev->blksz); -pr_debug (" available address = 0x%llx..0x%llx\n" , - first_addr, last_addr); -pr_debug (" full_update = %d\n" , dev->full_update); +log_debug ("MMC %d: lba=%ld blksz=%ld\n" , dev->dev_id, + block_dev->lba, block_dev->blksz); +log_debug (" available address = 0x%llx..0x%llx\n" , + first_addr, last_addr); +log_debug (" full_update = %d\n" , dev->full_update);break ;case STM32PROG_NOR :case STM32PROG_NAND :@@ -598,7 +598,7 @@ static int init_device(struct stm32prog_data *data,return -ENODEV ; }get_mtd_by_target (mtd_id, dev->target, dev->dev_id); -pr_debug ("%s\n" , mtd_id); +log_debug ("%s\n" , mtd_id);mtdparts_init (); mtd =get_mtd_device_nm (mtd_id);@@ -609,10 +609,10 @@ static int init_device(struct stm32prog_data *data, first_addr =0 ; last_addr = mtd->size; dev->erase_size = mtd->erasesize; -pr_debug ("MTD device %s: size=%lld erasesize=%d\n" , - mtd_id, mtd->size, mtd->erasesize); -pr_debug (" available address = 0x%llx..0x%llx\n" , - first_addr, last_addr); +log_debug ("MTD device %s: size=%lld erasesize=%d\n" , + mtd_id, mtd->size, mtd->erasesize); +log_debug (" available address = 0x%llx..0x%llx\n" , + first_addr, last_addr); dev->mtd = mtd;break ;case STM32PROG_RAM :@@ -624,13 +624,13 @@ static int init_device(struct stm32prog_data *data,stm32prog_err ("unknown device type = %d" , dev->target);return -ENODEV ; } -pr_debug (" erase size = 0x%x\n" , dev->erase_size); -pr_debug (" full_update = %d\n" , dev->full_update); +log_debug (" erase size = 0x%x\n" , dev->erase_size); +log_debug (" full_update = %d\n" , dev->full_update);/* order partition list in offset order */ list_sort (NULL , &dev->part_list, &part_cmp); part_id =1 ; -pr_debug ("id : Opt Phase Name target.n dev.n addr size part_off part_size\n" ); +log_debug ("id : Opt Phase Name target.n dev.n addr size part_off part_size\n" );list_for_each_entry (part, &dev->part_list, list) {if (part->bin_nb >1 ) { if ((dev->target != STM32PROG_NAND &&@@ -650,10 +650,10 @@ static int init_device(struct stm32prog_data *data, part->size = block_dev->lba * block_dev->blksz; else part->size = last_addr; -pr_debug ("-- : %1d %02x %14s %02d.%d %02d.%02d %08llx %08llx\n" , - part->option, part->id, part->name, - part->part_type, part->bin_nb, part->target, - part->dev_id, part->addr, part->size); +log_debug ("-- : %1d %02x %14s %02d.%d %02d.%02d %08llx %08llx\n" , + part->option, part->id, part->name, + part->part_type, part->bin_nb, part->target, + part->dev_id, part->addr, part->size);continue ; }if (part->part_id <0 ) {/* boot hw partition for eMMC */ @@ -709,10 +709,10 @@ static int init_device(struct stm32prog_data *data, part->dev->erase_size);return -EINVAL ; } -pr_debug ("%02d : %1d %02x %14s %02d.%d %02d.%02d %08llx %08llx" , - part->part_id, part->option, part->id, part->name, - part->part_type, part->bin_nb, part->target, - part->dev_id, part->addr, part->size); +log_debug ("%02d : %1d %02x %14s %02d.%d %02d.%02d %08llx %08llx" , + part->part_id, part->option, part->id, part->name, + part->part_type, part->bin_nb, part->target, + part->dev_id, part->addr, part->size); part_addr =0 ; part_size =0 ;@@ -726,7 +726,7 @@ static int init_device(struct stm32prog_data *data,* created for full update */ if (dev->full_update || part->part_id <0 ) { -pr_debug ("\n" ); +log_debug ("\n" );continue ; }struct disk_partition partinfo;@@ -771,11 +771,11 @@ static int init_device(struct stm32prog_data *data,if (!part_found) {stm32prog_err ("%s (0x%x): Invalid partition" , part->name, part->id); -pr_debug ("\n" ); +log_debug ("\n" );continue ; } -pr_debug (" %08llx %08llx\n" , part_addr, part_size); +log_debug (" %08llx %08llx\n" , part_addr, part_size);if (part->addr != part_addr) { stm32prog_err("%s (0x%x): Bad address for partition %d (%s) = 0x%llx <> 0x%llx expected",@@ -911,8 +911,8 @@ static int create_gpt_partitions(struct stm32prog_data *data)continue ;if (offset +100 > buflen) { -pr_debug ("\n%s: buffer too small, %s skippped" , - __func__, part->name); +log_debug ("\n%s: buffer too small, %s skippped" , + __func__, part->name);continue ; }@@ -960,7 +960,7 @@ static int create_gpt_partitions(struct stm32prog_data *data)if (offset) { offset +=snprintf (buf + offset, buflen - offset,"\"" ); -pr_debug ("\ncmd: %s\n" , buf); +log_debug ("\ncmd: %s\n" , buf);if (run_command (buf,0 )) {stm32prog_err ("GPT partitionning fail: %s" , buf);@@ -975,7 +975,7 @@ static int create_gpt_partitions(struct stm32prog_data *data)#ifdef DEBUG sprintf (buf,"gpt verify mmc %d" , data->dev[i].dev_id); -pr_debug ("\ncmd: %s" , buf); +log_debug ("\ncmd: %s" , buf);if (run_command (buf,0 ))printf ("fail !\n" );else @@ -1099,10 +1099,10 @@ static int stm32prog_alt_add(struct stm32prog_data *data,stm32prog_err ("invalid target: %d" , part->target);return ret; } -pr_debug ("dfu_alt_add(%s,%s,%s)\n" , dfustr, devstr, buf); +log_debug ("dfu_alt_add(%s,%s,%s)\n" , dfustr, devstr, buf); ret =dfu_alt_add (dfu, dfustr, devstr, buf); -pr_debug ("dfu_alt_add(%s,%s,%s) result %d\n" , - dfustr, devstr, buf, ret); +log_debug ("dfu_alt_add(%s,%s,%s) result %d\n" , + dfustr, devstr, buf, ret);return ret; }@@ -1117,7 +1117,7 @@ static int stm32prog_alt_add_virt(struct dfu_entity *dfu,sprintf (devstr,"%d" , phase);sprintf (buf,"@%s/0x%02x/1*%dBe" , name, phase, size); ret =dfu_alt_add (dfu,"virt" , devstr, buf); -pr_debug ("dfu_alt_add(virt,%s,%s) result %d\n" , devstr, buf, ret); +log_debug ("dfu_alt_add(virt,%s,%s) result %d\n" , devstr, buf, ret);return ret; }@@ -1172,7 +1172,7 @@ static int dfu_init_entities(struct stm32prog_data *data)sprintf (buf,"@FlashLayout/0x%02x/1*256Ke ram %x 40000" ,PHASE_FLASHLAYOUT ,STM32_DDR_BASE ); ret =dfu_alt_add (dfu,"ram" ,NULL , buf); -pr_debug ("dfu_alt_add(ram, NULL,%s) result %d\n" , buf, ret); +log_debug ("dfu_alt_add(ram, NULL,%s) result %d\n" , buf, ret); }if (!ret)@@ -1197,7 +1197,7 @@ static int dfu_init_entities(struct stm32prog_data *data)int stm32prog_otp_write (struct stm32prog_data *data,u32 offset,u8 *buffer,long *size) { -pr_debug ("%s: %x %lx\n" , __func__, offset, *size); +log_debug ("%s: %x %lx\n" , __func__, offset, *size);if (!data->otp_part) { data->otp_part =memalign (CONFIG_SYS_CACHELINE_SIZE ,OTP_SIZE );@@ -1227,7 +1227,7 @@ int stm32prog_otp_read(struct stm32prog_data *data, u32 offset, u8 *buffer,return -1 ; } -pr_debug ("%s: %x %lx\n" , __func__, offset, *size); +log_debug ("%s: %x %lx\n" , __func__, offset, *size);/* alway read for first packet */ if (!offset) {if (!data->otp_part)@@ -1259,7 +1259,7 @@ int stm32prog_otp_read(struct stm32prog_data *data, u32 offset, u8 *buffer,memcpy (buffer, (void *)((u32 )data->otp_part + offset), *size); end_otp_read: -pr_debug ("%s: result %i\n" , __func__, result); +log_debug ("%s: result %i\n" , __func__, result);return result; }@@ -1293,20 +1293,20 @@ int stm32prog_otp_start(struct stm32prog_data *data) result =0 ;break ;default : -pr_err ("%s: OTP incorrect value (err = %ld)\n" , - __func__, res.a1); +log_err ("%s: OTP incorrect value (err = %ld)\n" , + __func__, res.a1); result = -EINVAL ;break ; } }else { -pr_err ("%s: Failed to exec svc=%x op=%x in secure mode (err = %ld)\n" , - __func__,STM32_SMC_BSEC ,STM32_SMC_WRITE_ALL , res.a0); +log_err ("%s: Failed to exec svc=%x op=%x in secure mode (err = %ld)\n" , + __func__,STM32_SMC_BSEC ,STM32_SMC_WRITE_ALL , res.a0); result = -EINVAL ; }free (data->otp_part); data->otp_part =NULL ; -pr_debug ("%s: result %i\n" , __func__, result); +log_debug ("%s: result %i\n" , __func__, result);return result; }@@ -1314,7 +1314,7 @@ int stm32prog_otp_start(struct stm32prog_data *data)int stm32prog_pmic_write (struct stm32prog_data *data,u32 offset,u8 *buffer,long *size) { -pr_debug ("%s: %x %lx\n" , __func__, offset, *size); +log_debug ("%s: %x %lx\n" , __func__, offset, *size);if (!offset)memset (data->pmic_part,0 ,PMIC_SIZE );@@ -1339,7 +1339,7 @@ int stm32prog_pmic_read(struct stm32prog_data *data, u32 offset, u8 *buffer,return -EOPNOTSUPP ; } -pr_debug ("%s: %x %lx\n" , __func__, offset, *size); +log_debug ("%s: %x %lx\n" , __func__, offset, *size); ret =uclass_get_device_by_driver (UCLASS_MISC ,DM_GET_DRIVER (stpmic1_nvm), &dev);@@ -1374,7 +1374,7 @@ int stm32prog_pmic_read(struct stm32prog_data *data, u32 offset, u8 *buffer,memcpy (buffer, &data->pmic_part[offset], *size); end_pmic_read: -pr_debug ("%s: result %i\n" , __func__, result); +log_debug ("%s: result %i\n" , __func__, result);return result; }@@ -1430,7 +1430,7 @@ static int stm32prog_copy_fsbl(struct stm32prog_part_t *part)if (!fsbl)return -ENOMEM ; ret = dfu->read_medium (dfu,0 , fsbl, &size); -pr_debug ("%s read size=%lx ret=%d\n" , __func__, size, ret); +log_debug ("%s read size=%lx ret=%d\n" , __func__, size, ret);if (ret) goto error;@@ -1440,8 +1440,8 @@ static int stm32prog_copy_fsbl(struct stm32prog_part_t *part) offset += size;/* write to the next erase block */ ret = dfu->write_medium (dfu, offset, fsbl, &size); -pr_debug ("%s copy at ofset=%lx size=%lx ret=%d" , - __func__, offset, size, ret); +log_debug ("%s copy at ofset=%lx size=%lx ret=%d" , + __func__, offset, size, ret);if (ret) goto error; }@@ -1752,6 +1752,6 @@ void dfu_initiated_callback(struct dfu_entity *dfu)if (dfu->alt == stm32prog_data->cur_part->alt_id) { dfu->offset = stm32prog_data->offset; stm32prog_data->dfu_seq =0 ; -pr_debug ("dfu offset = 0x%llx\n" , dfu->offset); +log_debug ("dfu offset = 0x%llx\n" , dfu->offset); } }arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.h +1
-1@@ -172,7 +172,7 @@ char *stm32prog_get_error(struct stm32prog_data *data);if (data->phase !=PHASE_RESET ) { \sprintf (data->error, args); \ data->phase =PHASE_RESET ; \ -pr_err ("Error: %s\n" , data->error); } \ +log_err ("Error: %s\n" , data->error); } \ }/* Main function */ arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_serial.c +12
-12@@ -159,8 +159,8 @@ static int stm32prog_read(struct stm32prog_data *data, u8 phase, u32 offset, dfu_entity->offset = offset; data->offset = offset; data->read_phase = phase; -pr_debug ("\nSTM32 download read %s offset=0x%x\n" , - dfu_entity->name, offset); +log_debug ("\nSTM32 download read %s offset=0x%x\n" , + dfu_entity->name, offset); ret =dfu_read (dfu_entity, buffer, buffer_size, dfu_entity->i_blk_seq_num);if (ret <0 ) {@@ -198,7 +198,7 @@ int stm32prog_serial_init(struct stm32prog_data *data, int link_dev)sprintf (alias,"serial%d" , link_dev); path =fdt_get_alias (gd->fdt_blob, alias);if (!path) { -pr_err ("%s alias not found" , alias); +log_err ("%s alias not found" , alias);return -ENODEV ; } node =fdt_path_offset (gd->fdt_blob, path);@@ -212,7 +212,7 @@ int stm32prog_serial_init(struct stm32prog_data *data, int link_dev) down_serial_dev = dev; }if (!down_serial_dev) { -pr_err ("%s = %s device not found" , alias, path); +log_err ("%s = %s device not found" , alias, path);return -ENODEV ; }@@ -225,11 +225,11 @@ int stm32prog_serial_init(struct stm32prog_data *data, int link_dev) ops =serial_get_ops (down_serial_dev);if (!ops) { -pr_err ("%s = %s missing ops" , alias, path); +log_err ("%s = %s missing ops" , alias, path);return -ENODEV ; }if (!ops->setconfig) { -pr_err ("%s = %s missing setconfig" , alias, path); +log_err ("%s = %s missing setconfig" , alias, path);return -ENODEV ; }@@ -815,7 +815,7 @@ static void download_command(struct stm32prog_data *data)if (data->cursor > image_header->image_length +BL_HEADER_SIZE ) { -pr_err ("expected size exceeded\n" ); +log_err ("expected size exceeded\n" ); result =ABORT_BYTE ; goto end; }@@ -859,8 +859,8 @@ static void read_partition_command(struct stm32prog_data *data) rcv_data =stm32prog_serial_getc ();if (rcv_data != tmp_xor) { -pr_debug ("1st checksum received = %x, computed %x\n" , - rcv_data, tmp_xor); +log_debug ("1st checksum received = %x, computed %x\n" , + rcv_data, tmp_xor); goto error; }stm32prog_serial_putc (ACK_BYTE );@@ -872,12 +872,12 @@ static void read_partition_command(struct stm32prog_data *data) rcv_data =stm32prog_serial_getc ();if ((rcv_data ^ tmp_xor) !=0xFF ) { -pr_debug ("2nd checksum received = %x, computed %x\n" , - rcv_data, tmp_xor); +log_debug ("2nd checksum received = %x, computed %x\n" , + rcv_data, tmp_xor); goto error; } -pr_debug ("%s : %x\n" , __func__, part_id); +log_debug ("%s : %x\n" , __func__, part_id); rcv_data =0 ;switch (part_id) {case PHASE_OTP :arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c +6
-6@@ -47,11 +47,11 @@ static int stm32prog_cmd_write(u64 offset, void *buf, long *len)int ret;if (*len <5 ) { -pr_err ("size not allowed\n" ); +log_err ("size not allowed\n" );return -EINVAL ; }if (offset) { -pr_err ("invalid offset\n" ); +log_err ("invalid offset\n" );return -EINVAL ; } phase = pt[0 ];@@ -66,7 +66,7 @@ static int stm32prog_cmd_write(u64 offset, void *buf, long *len)/* set phase and offset */ ret =stm32prog_set_phase (stm32prog_data, phase, address);if (ret) -pr_err ("failed: %d\n" , ret); +log_err ("failed: %d\n" , ret);return ret; }@@ -81,7 +81,7 @@ static int stm32prog_cmd_read(u64 offset, void *buf, long *len)int length;if (*len <PHASE_MIN_SIZE ) { -pr_err ("request exceeds allowed area\n" ); +log_err ("request exceeds allowed area\n" );return -EINVAL ; }if (offset) {@@ -171,8 +171,8 @@ int stm32prog_get_medium_size_virt(struct dfu_entity *dfu, u64 *size) {if (dfu->dev_type !=DFU_DEV_VIRT ) { *size =0 ; -pr_debug ("%s, invalid dev_type = %d\n" , - __func__, dfu->dev_type); +log_debug ("%s, invalid dev_type = %d\n" , + __func__, dfu->dev_type);return -EINVAL ; }
arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c bool stm32prog_usb_loop(struct stm32prog_data *data, int dev) · line 232
Quoted 7 lines
arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog_usb.c +1
-1@@ -227,6 +227,6 @@ bool stm32prog_usb_loop(struct stm32prog_data *data, int dev)int g_dnl_get_board_bcd_device_number (int gcnum) { -pr_debug ("%s\n" , __func__); +log_debug ("%s\n" , __func__);return 0x200 ; }
Thanks
PATCH 3/33 arm: stm32mp: bsec: migrate trace to log macro
In reply to Patrick DelaunayDefine LOG_CATEGORY, change pr_debug to dev_dbg and remove "bsec:" header as it is managed by log macro (dev->name is displayed)
---
arch/arm/mach-stm32mp/bsec.c | 38 ++++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 17 deletions(-)
arch/arm/mach-stm32mp/bsec.c +21 -17
@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_MISC +#include <common.h> #include <dm.h> #include <log.h>
@@ -11,6 +13,7 @@#include <asm/arch/bsec.h> #include <asm/arch/stm32mp1_smc.h> #include <linux/arm-smccc.h> +#include <linux/compat.h> #include <linux/iopoll.h> #define BSEC_OTP_MAX_VALUE 95
@@ -160,7 +163,7 @@ static int bsec_power_safmem(u32 base, bool power)* @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: 0 if no error */ -static int bsec_shadow_register (u32 base,u32 otp) +static int bsec_shadow_register (struct udevice *dev,u32 base,u32 otp) {u32 val;int ret;
@@ -168,7 +171,8 @@ static int bsec_shadow_register(u32 base, u32 otp)/* check if shadowing of otp is locked */ if (bsec_read_SR_lock (base, otp)) -pr_debug ("bsec : OTP %d is locked and refreshed with 0\n" , otp); +dev_dbg (dev,"OTP %d is locked and refreshed with 0\n" , + otp);/* check if safemem is power up */ val =readl (base +BSEC_OTP_STATUS_OFF );
@@ -203,7 +207,7 @@ static int bsec_shadow_register(u32 base, u32 otp)* @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: 0 if no error */ -static int bsec_read_shadow (u32 base,u32 *val,u32 otp) +static int bsec_read_shadow (struct udevice *dev,u32 base,u32 *val,u32 otp) { *val =readl (base +BSEC_OTP_DATA_OFF + otp *sizeof (u32));
@@ -217,11 +221,11 @@ static int bsec_read_shadow(u32 base, u32 *val, u32 otp)* @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: 0 if no error */ -static int bsec_write_shadow (u32 base,u32 val,u32 otp) +static int bsec_write_shadow (struct udevice *dev,u32 base,u32 val,u32 otp) {/* check if programming of otp is locked */ if (bsec_read_SW_lock (base, otp)) -pr_debug ("bsec : OTP %d is lock, write will be ignore\n" , otp); +dev_dbg (dev,"OTP %d is lock, write will be ignore\n" , otp);writel (val, base +BSEC_OTP_DATA_OFF + otp *sizeof (u32));
@@ -236,16 +240,16 @@ static int bsec_write_shadow(u32 base, u32 val, u32 otp)* after the function the otp data is not refreshed in shadow * Return: 0 if no error */ -static int bsec_program_otp (long base,u32 val,u32 otp) +static int bsec_program_otp (struct udevice *dev,long base,u32 val,u32 otp) {u32 ret;bool power_up = false;if (bsec_read_SP_lock (base, otp)) -pr_debug ("bsec : OTP %d locked, prog will be ignore\n" , otp); +dev_dbg (dev,"OTP %d locked, prog will be ignore\n" , otp);if (readl (base +BSEC_OTP_LOCK_OFF ) & (1 <<BSEC_LOCK_PROGRAM )) -pr_debug ("bsec : Global lock, prog will be ignore\n" ); +dev_dbg (dev,"Global lock, prog will be ignore\n" );/* check if safemem is power up */ if (!(readl (base +BSEC_OTP_STATUS_OFF ) &BSEC_MODE_PWR_MASK )) {
@@ -298,21 +302,21 @@ static int stm32mp_bsec_read_otp(struct udevice *dev, u32 *val, u32 otp) plat =dev_get_platdata (dev);/* read current shadow value */ - ret =bsec_read_shadow (plat->base, &tmp_data, otp); + ret =bsec_read_shadow (dev, plat->base, &tmp_data, otp);if (ret)return ret;/* copy otp in shadow */ - ret =bsec_shadow_register (plat->base, otp); + ret =bsec_shadow_register (dev, plat->base, otp);if (ret)return ret; - ret =bsec_read_shadow (plat->base, val, otp); + ret =bsec_read_shadow (dev, plat->base, val, otp);if (ret)return ret;/* restore shadow value */ - ret =bsec_write_shadow (plat->base, tmp_data, otp); + ret =bsec_write_shadow (dev, plat->base, tmp_data, otp);return ret; }
@@ -328,7 +332,7 @@ static int stm32mp_bsec_read_shadow(struct udevice *dev, u32 *val, u32 otp) plat =dev_get_platdata (dev); -return bsec_read_shadow (plat->base, val, otp); +return bsec_read_shadow (dev, plat->base, val, otp); }static int stm32mp_bsec_read_lock (struct udevice *dev,u32 *val,u32 otp)
@@ -352,7 +356,7 @@ static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp) plat =dev_get_platdata (dev); -return bsec_program_otp (plat->base, val, otp); +return bsec_program_otp (dev, plat->base, val, otp); }
@@ -367,7 +371,7 @@ static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp) plat =dev_get_platdata (dev); -return bsec_write_shadow (plat->base, val, otp); +return bsec_write_shadow (dev, plat->base, val, otp); }static int stm32mp_bsec_write_lock (struct udevice *dev,u32 val,u32 otp)
@@ -497,7 +501,7 @@ static int stm32mp_bsec_probe(struct udevice *dev)for (otp =57 ; otp <=BSEC_OTP_MAX_VALUE ; otp++)if (!bsec_read_SR_lock (plat->base, otp)) -bsec_shadow_register (plat->base, otp); +bsec_shadow_register (dev, plat->base, otp); }return 0 ;
@@ -527,7 +531,7 @@ bool bsec_dbgswenable(void) ret =uclass_get_device_by_driver (UCLASS_MISC ,DM_GET_DRIVER (stm32mp_bsec), &dev);if (ret || !dev) { -pr_debug ("bsec driver not available\n" ); +log_debug ("bsec driver not available\n" );return false; }
Signature · 1 line
2.17.1
PATCH 3/33 arm: stm32mp: bsec: migrate trace to log macro
Quoted 155 lines · Patrick Delaunay
Define
LOG_CATEGORY, changepr_debugtodev_dbgand remove "bsec:" header as it is managed by log macro (dev->nameis displayed)Signed-off-by Patrick Delaunay <[email protected]>---
arch/arm/mach-stm32mp/bsec.c | 38 ++++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 17 deletions(-)arch/arm/mach-stm32mp/bsec.c +20
-16@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_MISC +#include <common.h> #include <dm.h> #include <log.h> @@ -11,6 +13,7 @@#include <asm/arch/bsec.h> #include <asm/arch/stm32mp1_smc.h> #include <linux/arm-smccc.h> +#include <linux/compat.h> #include <linux/iopoll.h> #define BSEC_OTP_MAX_VALUE 95@@ -160,7 +163,7 @@ static int bsec_power_safmem(u32 base, bool power)* @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: 0 if no error */ -static int bsec_shadow_register (u32 base,u32 otp) +static int bsec_shadow_register (struct udevice *dev,u32 base,u32 otp) {u32 val;int ret;@@ -168,7 +171,8 @@ static int bsec_shadow_register(u32 base, u32 otp)/* check if shadowing of otp is locked */ if (bsec_read_SR_lock (base, otp)) -pr_debug ("bsec : OTP %d is locked and refreshed with 0\n" , otp); +dev_dbg (dev,"OTP %d is locked and refreshed with 0\n" , + otp);/* check if safemem is power up */ val =readl (base +BSEC_OTP_STATUS_OFF );@@ -203,7 +207,7 @@ static int bsec_shadow_register(u32 base, u32 otp)* @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: 0 if no error */ -static int bsec_read_shadow (u32 base,u32 *val,u32 otp) +static int bsec_read_shadow (struct udevice *dev,u32 base,u32 *val,u32 otp) { *val =readl (base +BSEC_OTP_DATA_OFF + otp *sizeof (u32));@@ -217,11 +221,11 @@ static int bsec_read_shadow(u32 base, u32 *val, u32 otp)* @otp: otp number (0 - BSEC_OTP_MAX_VALUE) * Return: 0 if no error */ -static int bsec_write_shadow (u32 base,u32 val,u32 otp) +static int bsec_write_shadow (struct udevice *dev,u32 base,u32 val,u32 otp) {/* check if programming of otp is locked */ if (bsec_read_SW_lock (base, otp)) -pr_debug ("bsec : OTP %d is lock, write will be ignore\n" , otp); +dev_dbg (dev,"OTP %d is lock, write will be ignore\n" , otp);writel (val, base +BSEC_OTP_DATA_OFF + otp *sizeof (u32));@@ -236,16 +240,16 @@ static int bsec_write_shadow(u32 base, u32 val, u32 otp)* after the function the otp data is not refreshed in shadow * Return: 0 if no error */ -static int bsec_program_otp (long base,u32 val,u32 otp) +static int bsec_program_otp (struct udevice *dev,long base,u32 val,u32 otp) {u32 ret;bool power_up = false;if (bsec_read_SP_lock (base, otp)) -pr_debug ("bsec : OTP %d locked, prog will be ignore\n" , otp); +dev_dbg (dev,"OTP %d locked, prog will be ignore\n" , otp);if (readl (base +BSEC_OTP_LOCK_OFF ) & (1 <<BSEC_LOCK_PROGRAM )) -pr_debug ("bsec : Global lock, prog will be ignore\n" ); +dev_dbg (dev,"Global lock, prog will be ignore\n" );/* check if safemem is power up */ if (!(readl (base +BSEC_OTP_STATUS_OFF ) &BSEC_MODE_PWR_MASK )) {@@ -298,21 +302,21 @@ static int stm32mp_bsec_read_otp(struct udevice *dev, u32 *val, u32 otp) plat =dev_get_platdata (dev);/* read current shadow value */ - ret =bsec_read_shadow (plat->base, &tmp_data, otp); + ret =bsec_read_shadow (dev, plat->base, &tmp_data, otp);if (ret)return ret;/* copy otp in shadow */ - ret =bsec_shadow_register (plat->base, otp); + ret =bsec_shadow_register (dev, plat->base, otp);if (ret)return ret; - ret =bsec_read_shadow (plat->base, val, otp); + ret =bsec_read_shadow (dev, plat->base, val, otp);if (ret)return ret;/* restore shadow value */ - ret =bsec_write_shadow (plat->base, tmp_data, otp); + ret =bsec_write_shadow (dev, plat->base, tmp_data, otp);return ret; }@@ -328,7 +332,7 @@ static int stm32mp_bsec_read_shadow(struct udevice *dev, u32 *val, u32 otp) plat =dev_get_platdata (dev); -return bsec_read_shadow (plat->base, val, otp); +return bsec_read_shadow (dev, plat->base, val, otp); }static int stm32mp_bsec_read_lock (struct udevice *dev,u32 *val,u32 otp)@@ -352,7 +356,7 @@ static int stm32mp_bsec_write_otp(struct udevice *dev, u32 val, u32 otp) plat =dev_get_platdata (dev); -return bsec_program_otp (plat->base, val, otp); +return bsec_program_otp (dev, plat->base, val, otp); }@@ -367,7 +371,7 @@ static int stm32mp_bsec_write_shadow(struct udevice *dev, u32 val, u32 otp) plat =dev_get_platdata (dev); -return bsec_write_shadow (plat->base, val, otp); +return bsec_write_shadow (dev, plat->base, val, otp); }static int stm32mp_bsec_write_lock (struct udevice *dev,u32 val,u32 otp)@@ -497,7 +501,7 @@ static int stm32mp_bsec_probe(struct udevice *dev)for (otp =57 ; otp <=BSEC_OTP_MAX_VALUE ; otp++)if (!bsec_read_SR_lock (plat->base, otp)) -bsec_shadow_register (plat->base, otp); +bsec_shadow_register (dev, plat->base, otp); }return 0 ;
arch/arm/mach-stm32mp/bsec.c bool bsec_dbgswenable(void) · line 537
Quoted 8 lines
arch/arm/mach-stm32mp/bsec.c +1
-1@@ -527,7 +531,7 @@ bool bsec_dbgswenable(void) ret =uclass_get_device_by_driver (UCLASS_MISC ,DM_GET_DRIVER (stm32mp_bsec), &dev);if (ret || !dev) { -pr_debug ("bsec driver not available\n" ); +log_debug ("bsec driver not available\n" );return false; }
Thanks
PATCH 4/33 pinctrl: stm32: migrate trace to log macro
In reply to Patrick DelaunayChange debug to log macro and define LOG_CATEGORY.
Remove "%s:" with __func__ as it is managed by log macro (CONFIG_LOGF_FUNC)
---
drivers/pinctrl/pinctrl_stm32.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-)
drivers/pinctrl/pinctrl_stm32.c +16 -14
@@ -3,6 +3,8 @@* Copyright (C) 2017-2020 STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_PINCTRL +#include <common.h> #include <dm.h> #include <hwspinlock.h>
@@ -256,8 +258,8 @@ static int stm32_pinctrl_probe(struct udevice *dev)/* hwspinlock property is optional, just log the error */ ret =hwspinlock_get_by_index (dev,0 , &priv->hws);if (ret) -debug ("%s: hwspinlock_get_by_index may have failed (%d)\n" , - __func__, ret); +dev_dbg (dev,"hwspinlock_get_by_index may have failed (%d)\n" , + ret);return 0 ; }
@@ -305,8 +307,7 @@ static int prep_gpio_dsc(struct stm32_gpio_dsc *gpio_dsc, u32 port_pin) { gpio_dsc->port = (port_pin &0x1F000 ) >>12 ; gpio_dsc->pin = (port_pin &0x0F00 ) >>8 ; -debug ("%s: GPIO:port= %d, pin= %d\n" , __func__, gpio_dsc->port, - gpio_dsc->pin); +log_debug ("GPIO:port= %d, pin= %d\n" , gpio_dsc->port, gpio_dsc->pin);return 0 ; }
@@ -347,9 +348,9 @@ static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn,else gpio_ctl->pupd =STM32_GPIO_PUPD_NO ; -debug ("%s: gpio fn= %d, slew-rate= %x, op type= %x, pull-upd is = %x\n" , - __func__, gpio_fn, gpio_ctl->speed, gpio_ctl->otype, - gpio_ctl->pupd); +log_debug ("gpio fn= %d, slew-rate= %x, op type= %x, pull-upd is = %x\n" , + gpio_fn, gpio_ctl->speed, gpio_ctl->otype, + gpio_ctl->pupd);return 0 ; }
@@ -373,7 +374,7 @@ static int stm32_pinctrl_config(ofnode node)if (rv <0 )return rv; len = rv /sizeof (pin_mux[0 ]); -debug ("%s: no of pinmux entries= %d\n" , __func__, len); +log_debug ("No of pinmux entries= %d\n" , len);if (len >MAX_PINS_ONE_IP )return -EINVAL ; rv =ofnode_read_u32_array (subnode,"pinmux" , pin_mux, len);
@@ -382,7 +383,7 @@ static int stm32_pinctrl_config(ofnode node)for (i =0 ; i < len; i++) {struct gpio_desc desc; -debug ("%s: pinmux = %x\n" , __func__, *(pin_mux + i)); +log_debug ("pinmux = %x\n" , *(pin_mux + i));prep_gpio_dsc (&gpio_dsc, *(pin_mux + i));prep_gpio_ctl (&gpio_ctl, *(pin_mux + i), subnode); rv = uclass_get_device_by_seq(UCLASS_GPIO,
@@ -392,7 +393,7 @@ static int stm32_pinctrl_config(ofnode node)return rv; desc.offset = gpio_dsc.pin; rv =stm32_gpio_config (&desc, &gpio_ctl); -debug ("%s: rv = %d\n\n" , __func__, rv); +log_debug ("rv = %d\n\n" , rv);if (rv)return rv; }
@@ -408,7 +409,7 @@ static int stm32_pinctrl_bind(struct udevice *dev)int ret;dev_for_each_subnode (node, dev) { -debug ("%s: bind %s\n" , __func__,ofnode_get_name (node)); +dev_dbg (dev,"bind %s\n" ,ofnode_get_name (node));ofnode_get_property (node,"gpio-controller" , &ret);if (ret <0 )
@@ -424,7 +425,7 @@ static int stm32_pinctrl_bind(struct udevice *dev)if (ret)return ret; -debug ("%s: bind %s\n" , __func__, name); +dev_dbg (dev,"bind %s\n" , name); }return 0 ;
@@ -448,7 +449,7 @@ static int stm32_pinctrl_set_state_simple(struct udevice *dev,if (!list)return -EINVAL ; -debug ("%s: periph->name = %s\n" , __func__, periph->name); +dev_dbg (dev,"periph->name = %s\n" , periph->name); size /=sizeof (*list);for (i =0 ; i < size; i++) {
@@ -456,7 +457,8 @@ static int stm32_pinctrl_set_state_simple(struct udevice *dev, config_node =ofnode_get_by_phandle (phandle);if (!ofnode_valid (config_node)) { -pr_err ("prop pinctrl-0 index %d invalid phandle\n" , i); +dev_err (periph, +"prop pinctrl-0 index %d invalid phandle\n" , i);return -EINVAL ; }
Signature · 1 line
2.17.1
PATCH 4/33 pinctrl: stm32: migrate trace to log macro
Hi Patrick
Quoted 113 lines · Patrick Delaunay
Change debug to log macro and define
LOG_CATEGORY.Remove "%s:" with
__func__as it is managed by log macro (CONFIG_LOGF_FUNC)Signed-off-by Patrick Delaunay <[email protected]>---
drivers/pinctrl/pinctrl_stm32.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-)drivers/pinctrl/pinctrl_stm32.c +14
-13@@ -3,6 +3,8 @@* Copyright (C) 2017-2020 STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_PINCTRL +#include <common.h> #include <dm.h> #include <hwspinlock.h> @@ -256,8 +258,8 @@ static int stm32_pinctrl_probe(struct udevice *dev)/* hwspinlock property is optional, just log the error */ ret =hwspinlock_get_by_index (dev,0 , &priv->hws);if (ret) -debug ("%s: hwspinlock_get_by_index may have failed (%d)\n" , - __func__, ret); +dev_dbg (dev,"hwspinlock_get_by_index may have failed (%d)\n" , + ret);return 0 ; }@@ -305,8 +307,7 @@ static int prep_gpio_dsc(struct stm32_gpio_dsc *gpio_dsc, u32 port_pin) { gpio_dsc->port = (port_pin &0x1F000 ) >>12 ; gpio_dsc->pin = (port_pin &0x0F00 ) >>8 ; -debug ("%s: GPIO:port= %d, pin= %d\n" , __func__, gpio_dsc->port, - gpio_dsc->pin); +log_debug ("GPIO:port= %d, pin= %d\n" , gpio_dsc->port, gpio_dsc->pin);return 0 ; }@@ -347,9 +348,9 @@ static int prep_gpio_ctl(struct stm32_gpio_ctl *gpio_ctl, u32 gpio_fn,else gpio_ctl->pupd =STM32_GPIO_PUPD_NO ; -debug ("%s: gpio fn= %d, slew-rate= %x, op type= %x, pull-upd is = %x\n" , - __func__, gpio_fn, gpio_ctl->speed, gpio_ctl->otype, - gpio_ctl->pupd); +log_debug ("gpio fn= %d, slew-rate= %x, op type= %x, pull-upd is = %x\n" , + gpio_fn, gpio_ctl->speed, gpio_ctl->otype, + gpio_ctl->pupd);return 0 ; }@@ -373,7 +374,7 @@ static int stm32_pinctrl_config(ofnode node)if (rv <0 )return rv; len = rv /sizeof (pin_mux[0 ]); -debug ("%s: no of pinmux entries= %d\n" , __func__, len); +log_debug ("No of pinmux entries= %d\n" , len);if (len >MAX_PINS_ONE_IP )return -EINVAL ; rv =ofnode_read_u32_array (subnode,"pinmux" , pin_mux, len);@@ -382,7 +383,7 @@ static int stm32_pinctrl_config(ofnode node)for (i =0 ; i < len; i++) {struct gpio_desc desc; -debug ("%s: pinmux = %x\n" , __func__, *(pin_mux + i)); +log_debug ("pinmux = %x\n" , *(pin_mux + i));prep_gpio_dsc (&gpio_dsc, *(pin_mux + i));prep_gpio_ctl (&gpio_ctl, *(pin_mux + i), subnode); rv = uclass_get_device_by_seq(UCLASS_GPIO,@@ -392,7 +393,7 @@ static int stm32_pinctrl_config(ofnode node)return rv; desc.offset = gpio_dsc.pin; rv =stm32_gpio_config (&desc, &gpio_ctl); -debug ("%s: rv = %d\n\n" , __func__, rv); +log_debug ("rv = %d\n\n" , rv);if (rv)return rv; }@@ -408,7 +409,7 @@ static int stm32_pinctrl_bind(struct udevice *dev)int ret;dev_for_each_subnode (node, dev) { -debug ("%s: bind %s\n" , __func__,ofnode_get_name (node)); +dev_dbg (dev,"bind %s\n" ,ofnode_get_name (node));ofnode_get_property (node,"gpio-controller" , &ret);if (ret <0 )@@ -424,7 +425,7 @@ static int stm32_pinctrl_bind(struct udevice *dev)if (ret)return ret; -debug ("%s: bind %s\n" , __func__, name); +dev_dbg (dev,"bind %s\n" , name); }return 0 ;@@ -448,7 +449,7 @@ static int stm32_pinctrl_set_state_simple(struct udevice *dev,if (!list)return -EINVAL ; -debug ("%s: periph->name = %s\n" , __func__, periph->name); +dev_dbg (dev,"periph->name = %s\n" , periph->name); size /=sizeof (*list);for (i =0 ; i < size; i++) {
drivers/pinctrl/pinctrl_stm32.c static int stm32_pinctrl_set_state_simple(struct udevice *dev, · line 464
Quoted 9 lines
drivers/pinctrl/pinctrl_stm32.c +2
-1@@ -456,7 +457,8 @@ static int stm32_pinctrl_set_state_simple(struct udevice *dev, config_node =ofnode_get_by_phandle (phandle);if (!ofnode_valid (config_node)) { -pr_err ("prop pinctrl-0 index %d invalid phandle\n" , i); +dev_err (periph, +"prop pinctrl-0 index %d invalid phandle\n" , i);return -EINVAL ; }
Thanks
PATCH 5/33 gpio: stm32-gpio: migrate trace to dev and log macro
In reply to Patrick DelaunayChange debug to dev_dbg macro and define LOG_CATEGORY.
Remove dev->name as it is already displayed by dev macro.
---
drivers/gpio/stm32_gpio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/gpio/stm32_gpio.c +3 -1
@@ -4,6 +4,8 @@* Author(s): Vikas Manocha, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_GPIO +#include <common.h> #include <clk.h> #include <dm.h>
@@ -329,7 +331,7 @@ static int gpio_stm32_probe(struct udevice *dev)dev_err (dev,"failed to enable clock\n" );return ret; } -debug ("clock enabled for device %s\n" , dev->name); +dev_dbg (dev,"clock enabled\n" );return 0 ; }
Signature · 1 line
2.17.1
PATCH 5/33 gpio: stm32-gpio: migrate trace to dev and log macro
Hi Patrick
Quoted 24 lines · Patrick Delaunay
Change debug to
dev_dbgmacro and defineLOG_CATEGORY.Remove
dev->nameas it is already displayed by dev macro.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/gpio/stm32_gpio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)drivers/gpio/stm32_gpio.c +2
-0@@ -4,6 +4,8 @@* Author(s): Vikas Manocha, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_GPIO +#include <common.h> #include <clk.h> #include <dm.h>
drivers/gpio/stm32_gpio.c static int gpio_stm32_probe(struct udevice *dev) · line 337
Quoted 8 lines
drivers/gpio/stm32_gpio.c +1
-1@@ -329,7 +331,7 @@ static int gpio_stm32_probe(struct udevice *dev)dev_err (dev,"failed to enable clock\n" );return ret; } -debug ("clock enabled for device %s\n" , dev->name); +dev_dbg (dev,"clock enabled\n" );return 0 ; }
Thanks
PATCH 5/33 gpio: stm32-gpio: migrate trace to dev and log macro
In reply to Patrick DelaunayHi Patrick
Quoted 24 lines · Patrick Delaunay
Change debug to
dev_dbgmacro and defineLOG_CATEGORY.Remove
dev->nameas it is already displayed by dev macro.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/gpio/stm32_gpio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)drivers/gpio/stm32_gpio.c +2
-0@@ -4,6 +4,8 @@* Author(s): Vikas Manocha, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_GPIO +#include <common.h> #include <clk.h> #include <dm.h>
drivers/gpio/stm32_gpio.c static int gpio_stm32_probe(struct udevice *dev) · line 337
Quoted 8 lines
drivers/gpio/stm32_gpio.c +1
-1@@ -329,7 +331,7 @@ static int gpio_stm32_probe(struct udevice *dev)dev_err (dev,"failed to enable clock\n" );return ret; } -debug ("clock enabled for device %s\n" , dev->name); +dev_dbg (dev,"clock enabled\n" );return 0 ; }
Thanks
PATCH 6/33 remoproc: stm32: migrate trace to log macro
In reply to Patrick DelaunayDefine LOG_CATEGORY and remove unneeded pr_fmt macro with the dev macro as dev->name is displayed and CONFIG_LOGF_FUNC can be activated for log macro.
---
drivers/remoteproc/stm32_copro.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/remoteproc/stm32_copro.c +2 -1
@@ -2,7 +2,8 @@/* * Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ -#define pr_fmt (fmt) "%s: " fmt, __func__ +#define LOG_CATEGORY UCLASS_REMOTEPROC +#include <common.h> #include <dm.h> #include <errno.h>
Signature · 1 line
2.17.1
PATCH 6/33 remoproc: stm32: migrate trace to log macro
Hi Patrick
Quoted 15 lines · Patrick Delaunay
Define
LOG_CATEGORYand remove unneededpr_fmtmacro with the dev macro asdev->nameis displayed andCONFIG_LOGF_FUNCcan be activated for log macro.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/remoteproc/stm32_copro.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/remoteproc/stm32_copro.c +0
-0
drivers/remoteproc/stm32_copro.c line 9
Quoted 9 lines
drivers/remoteproc/stm32_copro.c +2
-1@@ -2,7 +2,8 @@/* * Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ -#define pr_fmt (fmt) "%s: " fmt, __func__ +#define LOG_CATEGORY UCLASS_REMOTEPROC +#include <common.h> #include <dm.h> #include <errno.h>
Thanks
PATCH 7/33 ram: stm32: migrate trace to log macro
In reply to Patrick DelaunayDefine LOG_CATEGORY, change debug to dev_dbg and remove "%s:" __func__ header as it is managed by dev macro (dev->name is displayed)
---
drivers/ram/stm32_sdram.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/ram/stm32_sdram.c +6 -4
@@ -4,6 +4,8 @@* Author(s): Vikas Manocha, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_RAM +#include <common.h> #include <clk.h> #include <dm.h>
@@ -272,7 +274,7 @@ static int stm32_fmc_ofdata_to_platdata(struct udevice *dev) ret =dev_read_phandle_with_args (dev,"st,syscfg" ,NULL ,0 ,0 , &args);if (ret) { -dev_dbg (dev,"%s: can't find syscon device (%d)\n" , __func__, ret); +dev_dbg (dev,"can't find syscon device (%d)\n" , ret); }else { syscfg_base = (u32 *)ofnode_get_addr (args.node);
@@ -281,7 +283,7 @@ static int stm32_fmc_ofdata_to_platdata(struct udevice *dev)/* set memory mapping selection */ clrsetbits_le32 (syscfg_base,MEM_MODE_MASK , mem_remap); }else { -dev_dbg (dev,"%s: cannot find st,mem_remap property\n" , __func__); +dev_dbg (dev,"cannot find st,mem_remap property\n" ); } swp_fmc =dev_read_u32_default (dev,"st,swp_fmc" ,NOT_FOUND );
@@ -289,7 +291,7 @@ static int stm32_fmc_ofdata_to_platdata(struct udevice *dev)/* set fmc swapping selection */ clrsetbits_le32 (syscfg_base,SWP_FMC_MASK , swp_fmc <<SWP_FMC_OFFSET ); }else { -dev_dbg (dev,"%s: cannot find st,swp_fmc property\n" , __func__); +dev_dbg (dev,"cannot find st,swp_fmc property\n" ); }dev_dbg (dev,"syscfg %x = %x\n" , (u32 )syscfg_base, *syscfg_base);
@@ -348,7 +350,7 @@ static int stm32_fmc_ofdata_to_platdata(struct udevice *dev) } params->no_sdram_banks = bank; -debug ("%s, no of banks = %d\n" , __func__, params->no_sdram_banks); +dev_dbg (dev,"no of banks = %d\n" , params->no_sdram_banks);return 0 ; }
Signature · 1 line
2.17.1
PATCH 7/33 ram: stm32: migrate trace to log macro
Hi Patrick
Quoted 50 lines · Patrick Delaunay
Define
LOG_CATEGORY, change debug todev_dbgand remove "%s:"__func__header as it is managed by dev macro (dev->nameis displayed)Signed-off-by Patrick Delaunay <[email protected]>---
drivers/ram/stm32_sdram.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)drivers/ram/stm32_sdram.c +5
-3@@ -4,6 +4,8 @@* Author(s): Vikas Manocha, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_RAM +#include <common.h> #include <clk.h> #include <dm.h> @@ -272,7 +274,7 @@ static int stm32_fmc_ofdata_to_platdata(struct udevice *dev) ret =dev_read_phandle_with_args (dev,"st,syscfg" ,NULL ,0 ,0 , &args);if (ret) { -dev_dbg (dev,"%s: can't find syscon device (%d)\n" , __func__, ret); +dev_dbg (dev,"can't find syscon device (%d)\n" , ret); }else { syscfg_base = (u32 *)ofnode_get_addr (args.node);@@ -281,7 +283,7 @@ static int stm32_fmc_ofdata_to_platdata(struct udevice *dev)/* set memory mapping selection */ clrsetbits_le32 (syscfg_base,MEM_MODE_MASK , mem_remap); }else { -dev_dbg (dev,"%s: cannot find st,mem_remap property\n" , __func__); +dev_dbg (dev,"cannot find st,mem_remap property\n" ); } swp_fmc =dev_read_u32_default (dev,"st,swp_fmc" ,NOT_FOUND );@@ -289,7 +291,7 @@ static int stm32_fmc_ofdata_to_platdata(struct udevice *dev)/* set fmc swapping selection */ clrsetbits_le32 (syscfg_base,SWP_FMC_MASK , swp_fmc <<SWP_FMC_OFFSET ); }else { -dev_dbg (dev,"%s: cannot find st,swp_fmc property\n" , __func__); +dev_dbg (dev,"cannot find st,swp_fmc property\n" ); }dev_dbg (dev,"syscfg %x = %x\n" , (u32 )syscfg_base, *syscfg_base);
drivers/ram/stm32_sdram.c static int stm32_fmc_ofdata_to_platdata(struct udevice *dev) · line 356
Quoted 8 lines
drivers/ram/stm32_sdram.c +1
-1@@ -348,7 +350,7 @@ static int stm32_fmc_ofdata_to_platdata(struct udevice *dev) } params->no_sdram_banks = bank; -debug ("%s, no of banks = %d\n" , __func__, params->no_sdram_banks); +dev_dbg (dev,"no of banks = %d\n" , params->no_sdram_banks);return 0 ; }
Thanks
PATCH 8/33 ram: stm32mp1: migrate trace to dev or log macro
In reply to Patrick DelaunayDefine LOG_CATEGORY, use dev_ macro when it is possible and migrate other trace to log_ macro.
---
drivers/ram/stm32mp1/stm32mp1_ddr.c | 36 +++--- drivers/ram/stm32mp1/stm32mp1_interactive.c | 4 +- drivers/ram/stm32mp1/stm32mp1_ram.c | 37 +++--- drivers/ram/stm32mp1/stm32mp1_tests.c | 19 +-- drivers/ram/stm32mp1/stm32mp1_tuning.c | 124 ++++++++++---------- 5 files changed, 116 insertions(+), 104 deletions(-)
drivers/ram/stm32mp1/stm32mp1_ddr.c +19 -17
@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_RAM +#include <common.h> #include <clk.h> #include <log.h>
@@ -311,17 +313,17 @@ static void set_reg(const struct ddr_info *priv,u32 base_addr =get_base_addr (priv, base);const struct reg_desc *desc = ddr_registers[type].desc; -debug ("init %s\n" , ddr_registers[type].name); +log_debug ("init %s\n" , ddr_registers[type].name);for (i =0 ; i < ddr_registers[type].size; i++) { ptr = (unsigned int *)(base_addr + desc[i].offset);if (desc[i].par_offset ==INVALID_OFFSET ) { -pr_err ("invalid parameter offset for %s" , desc[i].name); +log_err ("invalid parameter offset for %s" , desc[i].name); }else { value = *((u32 *)((u32 )param + desc[i].par_offset));writel (value, ptr); -debug ("[0x%x] %s= 0x%08x\n" , - (u32 )ptr, desc[i].name, value); +log_debug ("[0x%x] %s= 0x%08x\n" , + (u32 )ptr, desc[i].name, value); } } }
@@ -564,16 +566,16 @@ static void ddrphy_idone_wait(struct stm32mp1_ddrphy *phy)DDRPHYC_PGSR_RVERR | DDRPHYC_PGSR_RVEIRR), 1000000); -debug ("\n[0x%08x] pgsr = 0x%08x ret=%d\n" , - (u32)&phy->pgsr, pgsr, ret); +log_debug ("\n[0x%08x] pgsr = 0x%08x ret=%d\n" , + (u32)&phy->pgsr, pgsr, ret); }void stm32mp1_ddrphy_init (struct stm32mp1_ddrphy *phy,u32 pir) { pir |=DDRPHYC_PIR_INIT ;writel (pir, &phy->pir); -debug ("[0x%08x] pir = 0x%08x -> 0x%08x\n" , - (u32)&phy->pir, pir,readl (&phy->pir)); +log_debug ("[0x%08x] pir = 0x%08x -> 0x%08x\n" , + (u32)&phy->pir, pir,readl (&phy->pir));/* need to wait 10 configuration clock before start polling */ udelay (10 );
@@ -603,7 +605,7 @@ static void wait_sw_done_ack(struct stm32mp1_ddrctl *ctl)panic ("Timeout initialising DRAM : DDR->swstat = %x\n" , swstat); -debug ("[0x%08x] swstat = 0x%08x\n" , (u32)&ctl->swstat, swstat); +log_debug ("[0x%08x] swstat = 0x%08x\n" , (u32)&ctl->swstat, swstat); }/* wait quasi dynamic register update */
@@ -634,7 +636,7 @@ static void wait_operating_mode(struct ddr_info *priv, int mode)if (ret)panic ("Timeout DRAM : DDR->stat = %x\n" , stat); -debug ("[0x%08x] stat = 0x%08x\n" , (u32)&priv->ctl->stat, stat); +log_debug ("[0x%08x] stat = 0x%08x\n" , (u32)&priv->ctl->stat, stat); }void stm32mp1_refresh_disable (struct stm32mp1_ddrctl *ctl)
@@ -706,9 +708,9 @@ void stm32mp1_ddr_init(struct ddr_info *priv,panic ("ddr power init failed\n" ); start: -debug ("name = %s\n" , config->info.name); -debug ("speed = %d kHz\n" , config->info.speed); -debug ("size = 0x%x\n" , config->info.size); +log_debug ("name = %s\n" , config->info.name); +log_debug ("speed = %d kHz\n" , config->info.speed); +log_debug ("size = 0x%x\n" , config->info.size);/* * 1. Program the DWC_ddr_umctl2 registers * 1.1 RESETS: presetn, core_ddrc_rstn, aresetn
@@ -745,8 +747,8 @@ start:/* 1.5. initialize registers ddr_umctl2 */ /* Stop uMCTL2 before PHY is ready */ clrbits_le32 (&priv->ctl->dfimisc,DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN ); -debug ("[0x%08x] dfimisc = 0x%08x\n" , - (u32)&priv->ctl->dfimisc,readl (&priv->ctl->dfimisc)); +log_debug ("[0x%08x] dfimisc = 0x%08x\n" , + (u32)&priv->ctl->dfimisc,readl (&priv->ctl->dfimisc));set_reg (priv,REG_REG , &config->c_reg);set_reg (priv,REG_TIMING , &config->c_timing);
@@ -809,9 +811,9 @@ start:wait_operating_mode (priv,DDRCTRL_STAT_OPERATING_MODE_NORMAL );if (config->p_cal_present) { -debug ("DDR DQS training skipped.\n" ); +log_debug ("DDR DQS training skipped.\n" ); }else { -debug ("DDR DQS training : " ); +log_debug ("DDR DQS training : " );/* 8. Disable Auto refresh and power down by setting * - RFSHCTL3.dis_au_refresh = 1 * - PWRCTL.powerdown_en = 0
drivers/ram/stm32mp1/stm32mp1_interactive.c +3 -1
@@ -3,6 +3,8 @@* Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_RAM +#include <common.h> #include <command.h> #include <console.h>
@@ -404,7 +406,7 @@ bool stm32mp1_ddr_interactive(void *priv,#endif } -debug ("** step %d ** %s / %d\n" , step, step_str[step], next_step); +log_debug ("** step %d ** %s / %d\n" , step, step_str[step], next_step);if (next_step <0 )return false;
drivers/ram/stm32mp1/stm32mp1_ram.c +20 -17
@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_RAM +#include <common.h> #include <clk.h> #include <dm.h>
@@ -37,7 +39,7 @@ int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed) ret =clk_enable (&clk);if (ret) { -printf ("error for %s : %d\n" , clkname[idx], ret); +log_err ("error for %s : %d\n" , clkname[idx], ret);return ret; } }
@@ -45,13 +47,13 @@ int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed) priv->clk = clk; ddrphy_clk =clk_get_rate (&priv->clk); -debug ("DDR: mem_speed (%d kHz), RCC %d kHz\n" , - mem_speed, (u32)(ddrphy_clk /1000 )); +log_debug ("DDR: mem_speed (%d kHz), RCC %d kHz\n" , + mem_speed, (u32)(ddrphy_clk /1000 ));/* max 10% frequency delta */ ddr_clk =abs (ddrphy_clk - mem_speed *1000 );if (ddr_clk > (mem_speed *100 )) { -pr_err ("DDR expected freq %d kHz, current is %d kHz\n" , - mem_speed, (u32)(ddrphy_clk /1000 )); +log_err ("DDR expected freq %d kHz, current is %d kHz\n" , + mem_speed, (u32)(ddrphy_clk /1000 ));return -EINVAL ; }
@@ -118,7 +120,7 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) config.info.size =ofnode_read_u32_default (node,"st,mem-size" ,0 ); config.info.name =ofnode_read_string (node,"st,mem-name" );if (!config.info.name) { -debug ("%s: no st,mem-name\n" , __func__); +dev_dbg (dev,"no st,mem-name\n" );return -EINVAL ; }printf ("RAM: %s\n" , config.info.name);
@@ -128,12 +130,12 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) (void *)((u32 )&config + param[idx].offset), param[idx].size); -debug ("%s: %s[0x%x] = %d\n" , __func__, - param[idx].name, param[idx].size, ret); +dev_dbg (dev,"%s: %s[0x%x] = %d\n" , __func__, + param[idx].name, param[idx].size, ret);if (ret && (ret != -FDT_ERR_NOTFOUND || !param[idx].present)) { -pr_err ("%s: Cannot read %s, error=%d\n" , - __func__, param[idx].name, ret); +dev_err (dev,"Cannot read %s, error=%d\n" , + param[idx].name, ret);return -EINVAL ; }if (param[idx].present) {
@@ -153,7 +155,7 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) ret =clk_get_by_name (dev,"axidcg" , &axidcg);if (ret) { -debug ("%s: Cannot found axidcg\n" , __func__); +dev_dbg (dev,"%s: Cannot found axidcg\n" , __func__);return -EINVAL ; }clk_disable (&axidcg);/* disable clock gating during init */
@@ -163,13 +165,13 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev)clk_enable (&axidcg);/* enable clock gating */ /* check size */ -debug ("%s : get_ram_size(%x, %x)\n" , __func__, - (u32 )priv->info.base, (u32 )STM32_DDR_SIZE ); +dev_dbg (dev,"get_ram_size(%x, %x)\n" , + (u32 )priv->info.base, (u32 )STM32_DDR_SIZE ); priv->info.size =get_ram_size ((long *)priv->info.base,STM32_DDR_SIZE ); -debug ("%s : %x\n" , __func__, (u32 )priv->info.size); +dev_dbg (dev,"info.size: %x\n" , (u32 )priv->info.size);/* check memory access for all memory */ if (config.info.size != priv->info.size) {
@@ -186,12 +188,11 @@ static int stm32mp1_ddr_probe(struct udevice *dev)struct regmap *map;int ret; -debug ("STM32MP1 DDR probe\n" ); priv->dev = dev; ret =regmap_init_mem (dev_ofnode (dev), &map);if (ret) -return ret; +return log_ret (ret); priv->ctl =regmap_get_range (map,0 ); priv->phy =regmap_get_range (map,1 );
@@ -203,7 +204,9 @@ static int stm32mp1_ddr_probe(struct udevice *dev)#if !defined(CONFIG_TFABOOT ) && \ (!defined(CONFIG_SPL ) || defined(CONFIG_SPL_BUILD )) priv->info.size =0 ; -return stm32mp1_ddr_setup (dev); + ret =stm32mp1_ddr_setup (dev); + +return log_ret (ret);#else ofnode node =stm32mp1_ddr_get_ofnode (dev); priv->info.size =ofnode_read_u32_default (node,"st,mem-size" ,0 );
drivers/ram/stm32mp1/stm32mp1_tests.c +11 -8
@@ -2,6 +2,9 @@/* * Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ + +#define LOG_CATEGORY UCLASS_RAM +#include <common.h> #include <console.h> #include <init.h>
@@ -197,8 +200,8 @@ static u32 databus(u32 *address)/* Read it back (immediately is okay for this test). */ read_value =readl (address); -debug ("%x: %x <=> %x\n" , - (u32 )address, read_value, pattern); +log_debug ("%x: %x <=> %x\n" , + (u32 )address, read_value, pattern);if (read_value != pattern)return pattern;
@@ -252,8 +255,8 @@ static u32 *addressbus(u32 *address, u32 nb_bytes)for (offset =1 ; (offset & mask) !=0 ; offset <<=1 ) { read_value =readl (&address[offset]); -debug ("%x: %x <=> %x\n" , - (u32)&address[offset], read_value, pattern); +log_debug ("%x: %x <=> %x\n" , + (u32)&address[offset], read_value, pattern);if (read_value != pattern)return &address[offset]; }
@@ -363,8 +366,8 @@ static enum test_result databuswalk0(struct stm32mp1_ddrctl *ctl, data =readl (addr +4 * i);if (~(1 << i) != data) { error |=1 << i; -debug ("%x: error %x expected %x => error:%x\n" , - addr +4 * i, data, ~(1 << i), error); +log_debug ("%x: error %x expected %x => error:%x\n" , + addr +4 * i, data, ~(1 << i), error); } }if (test_loop_end (&loop, nb_loop,1000 ))
@@ -403,8 +406,8 @@ static enum test_result databuswalk1(struct stm32mp1_ddrctl *ctl, data =readl (addr +4 * i);if ((1 << i) != data) { error |=1 << i; -debug ("%x: error %x expected %x => error:%x\n" , - addr +4 * i, data, (1 << i), error); +log_debug ("%x: error %x expected %x => error:%x\n" , + addr +4 * i, data, (1 << i), error); } }if (test_loop_end (&loop, nb_loop,1000 ))
drivers/ram/stm32mp1/stm32mp1_tuning.c +63 -61
300 lines not on this page · raw message
Signature · 1 line
2.17.1
PATCH 8/33 ram: stm32mp1: migrate trace to dev or log macro
Hi Patrick
Quoted 641 lines · Patrick Delaunay
Define
LOG_CATEGORY, usedev_macro when it is possible and migrate other trace tolog_macro.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/ram/stm32mp1/stm32mp1_ddr.c | 36 +++--- drivers/ram/stm32mp1/stm32mp1_interactive.c | 4 +- drivers/ram/stm32mp1/stm32mp1_ram.c | 37 +++--- drivers/ram/stm32mp1/stm32mp1_tests.c | 19 +-- drivers/ram/stm32mp1/stm32mp1_tuning.c | 124 ++++++++++---------- 5 files changed, 116 insertions(+), 104 deletions(-)drivers/ram/stm32mp1/stm32mp1_ddr.c +19
-17@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_RAM +#include <common.h> #include <clk.h> #include <log.h> @@ -311,17 +313,17 @@ static void set_reg(const struct ddr_info *priv,u32 base_addr =get_base_addr (priv, base);const struct reg_desc *desc = ddr_registers[type].desc; -debug ("init %s\n" , ddr_registers[type].name); +log_debug ("init %s\n" , ddr_registers[type].name);for (i =0 ; i < ddr_registers[type].size; i++) { ptr = (unsigned int *)(base_addr + desc[i].offset);if (desc[i].par_offset ==INVALID_OFFSET ) { -pr_err ("invalid parameter offset for %s" , desc[i].name); +log_err ("invalid parameter offset for %s" , desc[i].name); }else { value = *((u32 *)((u32 )param + desc[i].par_offset));writel (value, ptr); -debug ("[0x%x] %s= 0x%08x\n" , - (u32 )ptr, desc[i].name, value); +log_debug ("[0x%x] %s= 0x%08x\n" , + (u32 )ptr, desc[i].name, value); } } }@@ -564,16 +566,16 @@ static void ddrphy_idone_wait(struct stm32mp1_ddrphy *phy)DDRPHYC_PGSR_RVERR | DDRPHYC_PGSR_RVEIRR), 1000000); -debug ("\n[0x%08x] pgsr = 0x%08x ret=%d\n" , - (u32)&phy->pgsr, pgsr, ret); +log_debug ("\n[0x%08x] pgsr = 0x%08x ret=%d\n" , + (u32)&phy->pgsr, pgsr, ret); }void stm32mp1_ddrphy_init (struct stm32mp1_ddrphy *phy,u32 pir) { pir |=DDRPHYC_PIR_INIT ;writel (pir, &phy->pir); -debug ("[0x%08x] pir = 0x%08x -> 0x%08x\n" , - (u32)&phy->pir, pir,readl (&phy->pir)); +log_debug ("[0x%08x] pir = 0x%08x -> 0x%08x\n" , + (u32)&phy->pir, pir,readl (&phy->pir));/* need to wait 10 configuration clock before start polling */ udelay (10 );@@ -603,7 +605,7 @@ static void wait_sw_done_ack(struct stm32mp1_ddrctl *ctl)panic ("Timeout initialising DRAM : DDR->swstat = %x\n" , swstat); -debug ("[0x%08x] swstat = 0x%08x\n" , (u32)&ctl->swstat, swstat); +log_debug ("[0x%08x] swstat = 0x%08x\n" , (u32)&ctl->swstat, swstat); }/* wait quasi dynamic register update */ @@ -634,7 +636,7 @@ static void wait_operating_mode(struct ddr_info *priv, int mode)if (ret)panic ("Timeout DRAM : DDR->stat = %x\n" , stat); -debug ("[0x%08x] stat = 0x%08x\n" , (u32)&priv->ctl->stat, stat); +log_debug ("[0x%08x] stat = 0x%08x\n" , (u32)&priv->ctl->stat, stat); }void stm32mp1_refresh_disable (struct stm32mp1_ddrctl *ctl)@@ -706,9 +708,9 @@ void stm32mp1_ddr_init(struct ddr_info *priv,panic ("ddr power init failed\n" ); start: -debug ("name = %s\n" , config->info.name); -debug ("speed = %d kHz\n" , config->info.speed); -debug ("size = 0x%x\n" , config->info.size); +log_debug ("name = %s\n" , config->info.name); +log_debug ("speed = %d kHz\n" , config->info.speed); +log_debug ("size = 0x%x\n" , config->info.size);/* * 1. Program the DWC_ddr_umctl2 registers * 1.1 RESETS: presetn, core_ddrc_rstn, aresetn @@ -745,8 +747,8 @@ start:/* 1.5. initialize registers ddr_umctl2 */ /* Stop uMCTL2 before PHY is ready */ clrbits_le32 (&priv->ctl->dfimisc,DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN ); -debug ("[0x%08x] dfimisc = 0x%08x\n" , - (u32)&priv->ctl->dfimisc,readl (&priv->ctl->dfimisc)); +log_debug ("[0x%08x] dfimisc = 0x%08x\n" , + (u32)&priv->ctl->dfimisc,readl (&priv->ctl->dfimisc));set_reg (priv,REG_REG , &config->c_reg);set_reg (priv,REG_TIMING , &config->c_timing);@@ -809,9 +811,9 @@ start:wait_operating_mode (priv,DDRCTRL_STAT_OPERATING_MODE_NORMAL );if (config->p_cal_present) { -debug ("DDR DQS training skipped.\n" ); +log_debug ("DDR DQS training skipped.\n" ); }else { -debug ("DDR DQS training : " ); +log_debug ("DDR DQS training : " );/* 8. Disable Auto refresh and power down by setting * - RFSHCTL3.dis_au_refresh = 1 * - PWRCTL.powerdown_en = 0 drivers/ram/stm32mp1/stm32mp1_interactive.c +3
-1@@ -3,6 +3,8 @@* Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_RAM +#include <common.h> #include <command.h> #include <console.h> @@ -404,7 +406,7 @@ bool stm32mp1_ddr_interactive(void *priv,#endif } -debug ("** step %d ** %s / %d\n" , step, step_str[step], next_step); +log_debug ("** step %d ** %s / %d\n" , step, step_str[step], next_step);if (next_step <0 )return false;drivers/ram/stm32mp1/stm32mp1_ram.c +20
-17@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_RAM +#include <common.h> #include <clk.h> #include <dm.h> @@ -37,7 +39,7 @@ int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed) ret =clk_enable (&clk);if (ret) { -printf ("error for %s : %d\n" , clkname[idx], ret); +log_err ("error for %s : %d\n" , clkname[idx], ret);return ret; } }@@ -45,13 +47,13 @@ int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed) priv->clk = clk; ddrphy_clk =clk_get_rate (&priv->clk); -debug ("DDR: mem_speed (%d kHz), RCC %d kHz\n" , - mem_speed, (u32)(ddrphy_clk /1000 )); +log_debug ("DDR: mem_speed (%d kHz), RCC %d kHz\n" , + mem_speed, (u32)(ddrphy_clk /1000 ));/* max 10% frequency delta */ ddr_clk =abs (ddrphy_clk - mem_speed *1000 );if (ddr_clk > (mem_speed *100 )) { -pr_err ("DDR expected freq %d kHz, current is %d kHz\n" , - mem_speed, (u32)(ddrphy_clk /1000 )); +log_err ("DDR expected freq %d kHz, current is %d kHz\n" , + mem_speed, (u32)(ddrphy_clk /1000 ));return -EINVAL ; }@@ -118,7 +120,7 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) config.info.size =ofnode_read_u32_default (node,"st,mem-size" ,0 ); config.info.name =ofnode_read_string (node,"st,mem-name" );if (!config.info.name) { -debug ("%s: no st,mem-name\n" , __func__); +dev_dbg (dev,"no st,mem-name\n" );return -EINVAL ; }printf ("RAM: %s\n" , config.info.name);@@ -128,12 +130,12 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) (void *)((u32 )&config + param[idx].offset), param[idx].size); -debug ("%s: %s[0x%x] = %d\n" , __func__, - param[idx].name, param[idx].size, ret); +dev_dbg (dev,"%s: %s[0x%x] = %d\n" , __func__, + param[idx].name, param[idx].size, ret);if (ret && (ret != -FDT_ERR_NOTFOUND || !param[idx].present)) { -pr_err ("%s: Cannot read %s, error=%d\n" , - __func__, param[idx].name, ret); +dev_err (dev,"Cannot read %s, error=%d\n" , + param[idx].name, ret);return -EINVAL ; }if (param[idx].present) {@@ -153,7 +155,7 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) ret =clk_get_by_name (dev,"axidcg" , &axidcg);if (ret) { -debug ("%s: Cannot found axidcg\n" , __func__); +dev_dbg (dev,"%s: Cannot found axidcg\n" , __func__);return -EINVAL ; }clk_disable (&axidcg);/* disable clock gating during init */ @@ -163,13 +165,13 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev)clk_enable (&axidcg);/* enable clock gating */ /* check size */ -debug ("%s : get_ram_size(%x, %x)\n" , __func__, - (u32 )priv->info.base, (u32 )STM32_DDR_SIZE ); +dev_dbg (dev,"get_ram_size(%x, %x)\n" , + (u32 )priv->info.base, (u32 )STM32_DDR_SIZE ); priv->info.size =get_ram_size ((long *)priv->info.base,STM32_DDR_SIZE ); -debug ("%s : %x\n" , __func__, (u32 )priv->info.size); +dev_dbg (dev,"info.size: %x\n" , (u32 )priv->info.size);/* check memory access for all memory */ if (config.info.size != priv->info.size) {@@ -186,12 +188,11 @@ static int stm32mp1_ddr_probe(struct udevice *dev)struct regmap *map;int ret; -debug ("STM32MP1 DDR probe\n" ); priv->dev = dev; ret =regmap_init_mem (dev_ofnode (dev), &map);if (ret) -return ret; +return log_ret (ret); priv->ctl =regmap_get_range (map,0 ); priv->phy =regmap_get_range (map,1 );@@ -203,7 +204,9 @@ static int stm32mp1_ddr_probe(struct udevice *dev)#if !defined(CONFIG_TFABOOT ) && \ (!defined(CONFIG_SPL ) || defined(CONFIG_SPL_BUILD )) priv->info.size =0 ; -return stm32mp1_ddr_setup (dev); + ret =stm32mp1_ddr_setup (dev); + +return log_ret (ret);#else ofnode node =stm32mp1_ddr_get_ofnode (dev); priv->info.size =ofnode_read_u32_default (node,"st,mem-size" ,0 );drivers/ram/stm32mp1/stm32mp1_tests.c +11
-8@@ -2,6 +2,9 @@/* * Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ + +#define LOG_CATEGORY UCLASS_RAM +#include <common.h> #include <console.h> #include <init.h> @@ -197,8 +200,8 @@ static u32 databus(u32 *address)/* Read it back (immediately is okay for this test). */ read_value =readl (address); -debug ("%x: %x <=> %x\n" , - (u32 )address, read_value, pattern); +log_debug ("%x: %x <=> %x\n" , + (u32 )address, read_value, pattern);if (read_value != pattern)return pattern;@@ -252,8 +255,8 @@ static u32 *addressbus(u32 *address, u32 nb_bytes)for (offset =1 ; (offset & mask) !=0 ; offset <<=1 ) { read_value =readl (&address[offset]); -debug ("%x: %x <=> %x\n" , - (u32)&address[offset], read_value, pattern); +log_debug ("%x: %x <=> %x\n" , + (u32)&address[offset], read_value, pattern);if (read_value != pattern)return &address[offset]; }@@ -363,8 +366,8 @@ static enum test_result databuswalk0(struct stm32mp1_ddrctl *ctl, data =readl (addr +4 * i);if (~(1 << i) != data) { error |=1 << i; -debug ("%x: error %x expected %x => error:%x\n" , - addr +4 * i, data, ~(1 << i), error); +log_debug ("%x: error %x expected %x => error:%x\n" , + addr +4 * i, data, ~(1 << i), error); } }if (test_loop_end (&loop, nb_loop,1000 ))@@ -403,8 +406,8 @@ static enum test_result databuswalk1(struct stm32mp1_ddrctl *ctl, data =readl (addr +4 * i);if ((1 << i) != data) { error |=1 << i; -debug ("%x: error %x expected %x => error:%x\n" , - addr +4 * i, data, (1 << i), error); +log_debug ("%x: error %x expected %x => error:%x\n" , + addr +4 * i, data, (1 << i), error); } }if (test_loop_end (&loop, nb_loop,1000 ))drivers/ram/stm32mp1/stm32mp1_tuning.c +60
-60@@ -2,6 +2,9 @@/* * Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ + +#define LOG_CATEGORY UCLASS_RAM +#include <common.h> #include <console.h> #include <clk.h> @@ -227,8 +230,7 @@ static u8 DQ_unit_index(struct stm32mp1_ddrphy *phy, u8 byte, u8 bit) index = (readl (addr) >>DDRPHYC_DXNDQTR_DQDLY_SHIFT (bit)) &DDRPHYC_DXNDQTR_DQDLY_LOW_MASK ; -pr_debug ("%s: [%x]: %x => DQ unit index = %x\n" , - __func__, addr,readl (addr), index); +log_debug ("[%x]: %x => DQ unit index = %x\n" , addr,readl (addr), index);return index; }@@ -470,13 +472,13 @@ static void apply_deskew_results(struct stm32mp1_ddrphy *phy, u8 byte,for (bit_i =0 ; bit_i <8 ; bit_i++) {set_DQ_unit_delay (phy, byte, bit_i, deskew_delay[byte][bit_i]); index =DQ_unit_index (phy, byte, bit_i); -pr_debug ("Byte %d ; bit %d : The new DQ delay (%d) index=%d [delta=%d, 3 is the default]" , - byte, bit_i, deskew_delay[byte][bit_i], - index, index -3 ); +log_debug ("Byte %d ; bit %d : The new DQ delay (%d) index=%d [delta=%d, 3 is the default]" , + byte, bit_i, deskew_delay[byte][bit_i], + index, index -3 );printf ("Byte %d, bit %d, DQ delay = %d" , byte, bit_i, deskew_delay[byte][bit_i]);if (deskew_non_converge[byte][bit_i] ==1 ) -pr_debug (" - not converged : still more skew" ); +log_debug (" - not converged : still more skew" );printf ("\n" ); } }@@ -536,7 +538,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,/* Config the BIST block */ config_BIST (ctl, phy); -pr_debug ("BIST Config done.\n" ); +log_debug ("BIST Config done.\n" );/* Train each byte */ for (datx8 =0 ; datx8 < nb_bytes; datx8++) {@@ -545,9 +547,9 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, datx8 + 1, nb_bytes, error);return TEST_FAILED ; } -pr_debug ("\n======================\n" ); -pr_debug ("Start deskew byte %d .\n" , datx8); -pr_debug ("======================\n" ); +log_debug ("\n======================\n" ); +log_debug ("Start deskew byte %d .\n" , datx8); +log_debug ("======================\n" );/* Enable Byte (DXNGCR, bit DXEN) */ setbits_le32 (DXNGCR (phy, datx8),DDRPHYC_DXNGCR_DXEN );@@ -584,7 +586,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,* Else, look for Pass init condition */ if (!success) { -pr_debug ("Fail at init condtion. Let's look for a good init condition.\n" ); +log_debug ("Fail at init condtion. Let's look for a good init condition.\n" ); success =0 ;/* init */ /* Make sure we start with a PASS condition before * looking for a fail condition. @@ -592,7 +594,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,*/ /* escape if we find a PASS */ -pr_debug ("increase Phase idx\n" ); +log_debug ("increase Phase idx\n" );while (!success && (phase_idx <=MAX_DQS_PHASE_IDX )) {DQS_phase_delay (phy, datx8, phase_idx);BIST_test (phy, datx8, &result);@@ -618,7 +620,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,* we have hold violation, lets try reduce DQS_unit * Delay */ -pr_debug ("Still fail. Try decrease DQS Unit delay\n" ); +log_debug ("Still fail. Try decrease DQS Unit delay\n" ); phase_idx =0 ; dqs_unit_delay_index =0 ;@@ -665,9 +667,9 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,return TEST_FAILED ; } -pr_debug ("there is a pass region for phase idx %d\n" , - phase_idx); -pr_debug ("Step1: Find the first failing condition\n" ); +log_debug ("there is a pass region for phase idx %d\n" , + phase_idx); +log_debug ("Step1: Find the first failing condition\n" );/* Look for the first failing condition by PHASE stepping. * This part of the algo can finish without converging. */ @@ -692,9 +694,9 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,* stepping (minimal delay) */ if (!success) { -pr_debug ("Fail region (PHASE) found phase idx %d\n" , - phase_idx); -pr_debug ("Let's look for first success by DQS Unit steps\n" ); +log_debug ("Fail region (PHASE) found phase idx %d\n" , + phase_idx); +log_debug ("Let's look for first success by DQS Unit steps\n" );/* This part, the algo always converge */ phase_idx--;@@ -721,7 +723,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,/*+1 to get back to current condition */ last_right_ok.unit = dqs_unit_delay_index +1 ; last_right_ok.bits_delay =0xFFFFFFFF ; -pr_debug ("Found %d\n" , dqs_unit_delay_index); +log_debug ("Found %d\n" , dqs_unit_delay_index); }else {/* the last OK condition is then with the * previous phase_idx. @@ -735,8 +737,8 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,*/ last_right_ok.unit =1 ; last_right_ok.bits_delay =0xFFFFFFFF ; -pr_debug ("Not Found : try previous phase %d\n" , - phase_idx -1 ); +log_debug ("Not Found : try previous phase %d\n" , + phase_idx -1 );DQS_phase_delay (phy, datx8, phase_idx -1 ); dqs_unit_delay_index =0 ;@@ -749,8 +751,8 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,BIST_test (phy, datx8, &result); success = result.test_result; dqs_unit_delay_index++; -pr_debug ("dqs_unit_delay_index = %d, result = %d\n" , - dqs_unit_delay_index, success); +log_debug ("dqs_unit_delay_index = %d, result = %d\n" , + dqs_unit_delay_index, success); }if (!success) {@@ -758,7 +760,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, dqs_unit_delay_index -1 ; }else { last_right_ok.unit =0 ; -pr_debug ("ERROR: failed region not FOUND" ); +log_debug ("ERROR: failed region not FOUND" ); } } }else {@@ -775,7 +777,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, last_right_ok.phase =MAX_DQS_PHASE_IDX ; last_right_ok.unit =MAX_DQS_UNIT_IDX ; last_right_ok.bits_delay =0xFFFFFFFF ; -pr_debug ("Can't find the a fail condition\n" ); +log_debug ("Can't find the a fail condition\n" ); }/* step 2: @@ -787,9 +789,9 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,*/ printf ("Byte %d, DQS unit = %d, phase = %d\n" , datx8, last_right_ok.unit, last_right_ok.phase); -pr_debug ("Step2, unit = %d, phase = %d, bits delay=%x\n" , - last_right_ok.unit, last_right_ok.phase, - last_right_ok.bits_delay); +log_debug ("Step2, unit = %d, phase = %d, bits delay=%x\n" , + last_right_ok.unit, last_right_ok.phase, + last_right_ok.bits_delay);/* Restore the last_right_ok condtion. */ DQS_unit_delay (phy, datx8, last_right_ok.unit);@@ -812,7 +814,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, datx8 + 1, nb_bytes, error);return error; } -pr_debug ("deskewing bit %d:\n" , bit_i); +log_debug ("deskewing bit %d:\n" , bit_i); success =1 ;/* init */ /* Set all DQDLYn to maximum value. * Only bit_i will be down-delayed @@ -855,10 +857,10 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,* at one bit. */ fail_found =1 ; -pr_debug ("Fail found on bit %d, for delay = %d => deskew[%d][%d] = %d\n" , - bit_i, bit_i_delay_index +1 , - datx8, bit_i, - deskew_delay[datx8][bit_i]); +log_debug ("Fail found on bit %d, for delay = %d => deskew[%d][%d] = %d\n" , + bit_i, bit_i_delay_index +1 , + datx8, bit_i, + deskew_delay[datx8][bit_i]); }else {/* if we can find a success condition by * back-delaying this bit, just set the delay @@ -870,20 +872,20 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl,* in the report. */ deskew_non_converge[datx8][bit_i] =1 ; -pr_debug ("Fail not found on bit %d => deskew[%d][%d] = %d\n" , - bit_i, datx8, bit_i, - deskew_delay[datx8][bit_i]); +log_debug ("Fail not found on bit %d => deskew[%d][%d] = %d\n" , + bit_i, datx8, bit_i, + deskew_delay[datx8][bit_i]); } } -pr_debug ("**********byte %d tuning complete************\n" , - datx8); +log_debug ("**********byte %d tuning complete************\n" , + datx8);/* If we can't find any failure by back delaying DQ lines, * hold the default values */ if (!fail_found) {for (bit_i =0 ; bit_i <8 ; bit_i++) deskew_delay[datx8][bit_i] =0 ; -pr_debug ("The Deskew algorithm can't converge, there is too much margin in your design. Good job!\n" ); +log_debug ("The Deskew algorithm can't converge, there is too much margin in your design. Good job!\n" ); } apply_deskew_results(phy, datx8, deskew_delay,@@ -986,7 +988,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, dqs_unit_delay_index_pass = dqs_unit_delay_index; success =0 ; -pr_debug ("STEP0: Find Init delay\n" ); +log_debug ("STEP0: Find Init delay\n" );/* STEP0: Find Init delay: a delay that put the system * in a "Pass" condition then (TODO) update * dqs_unit_delay_index_pass & phase_idx_pass @@ -1035,7 +1037,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, byte + 1, nb_bytes, error);return TEST_FAILED ; } -pr_debug ("STEP1: Find LEFT PHASE DQS Bound\n" ); +log_debug ("STEP1: Find LEFT PHASE DQS Bound\n" );/* STEP1: Find LEFT PHASE DQS Bound */ while ((phase_idx >= 0) && (phase_idx <= MAX_DQS_PHASE_IDX) &&@@ -1069,7 +1071,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, byte + 1, nb_bytes, error);return TEST_FAILED ; } -pr_debug ("STEP2: Find UNIT left bound\n" ); +log_debug ("STEP2: Find UNIT left bound\n" );/* STEP2: Find UNIT left bound */ while ((dqs_unit_delay_index >=0 ) && !left_unit_bound_found) {@@ -1097,7 +1099,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, byte + 1, nb_bytes, error);return TEST_FAILED ; } -pr_debug ("STEP3: Find PHase right bound\n" ); +log_debug ("STEP3: Find PHase right bound\n" );/* STEP3: Find PHase right bound, start with "pass" * condition */ @@ -1135,7 +1137,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, byte + 1, nb_bytes, error);return TEST_FAILED ; } -pr_debug ("STEP4: Find UNIT right bound\n" ); +log_debug ("STEP4: Find UNIT right bound\n" );/* STEP4: Find UNIT right bound */ while ((dqs_unit_delay_index <=MAX_DQS_UNIT_IDX ) && !right_unit_bound_found) {@@ -1174,12 +1176,12 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl,if (((right_bound.phase + left_bound.phase) %2 ==1 ) && eye_training_val[byte][1 ] !=MAX_DQS_UNIT_IDX ) eye_training_val[byte][1 ]++; -pr_debug ("** found phase : %d - %d & unit %d - %d\n" , - right_bound.phase, left_bound.phase, - right_bound.unit, left_bound.unit); -pr_debug ("** calculating mid region: phase: %d unit: %d (nominal is 3)\n" , - eye_training_val[byte][0 ], - eye_training_val[byte][1 ]); +log_debug ("** found phase : %d - %d & unit %d - %d\n" , + right_bound.phase, left_bound.phase, + right_bound.unit, left_bound.unit); +log_debug ("** calculating mid region: phase: %d unit: %d (nominal is 3)\n" , + eye_training_val[byte][0 ], + eye_training_val[byte][1 ]); }else {/* PPPPPPPPPP, we're already good. * Set nominal values. @@ -1280,11 +1282,11 @@ static u8 set_midpoint_read_dqs_gating(struct stm32mp1_ddrphy *phy, u8 byte,* or pppppff or ffppppp */ if (left_bound_found || right_bound_found) { -pr_debug ("idx0(%d): %d %d idx1(%d) : %d %d\n" , - left_bound_found, - right_bound_idx[0 ], left_bound_idx[0 ], - right_bound_found, - right_bound_idx[1 ], left_bound_idx[1 ]); +log_debug ("idx0(%d): %d %d idx1(%d) : %d %d\n" , + left_bound_found, + right_bound_idx[0 ], left_bound_idx[0 ], + right_bound_found, + right_bound_idx[1 ], left_bound_idx[1 ]); dqs_gate_values[byte][0 ] = (right_bound_idx[0 ] + left_bound_idx[0 ]) /2 ; dqs_gate_values[byte][1] =@@ -1319,14 +1321,14 @@ static u8 set_midpoint_read_dqs_gating(struct stm32mp1_ddrphy *phy, u8 byte, left_bound_idx[0 ]; } } -pr_debug ("*******calculating mid region: system latency: %d phase: %d********\n" , - dqs_gate_values[byte][0 ], - dqs_gate_values[byte][1 ]); -pr_debug ("*******the nominal values were system latency: 0 phase: 2*******\n" ); + log_debug("*******calculating mid region: system latency: %d phase: %d********\n", + dqs_gate_values[byte][0],
drivers/ram/stm32mp1/stm32mp1_tuning.c static u8 set_midpoint_read_dqs_gating(struct stm32mp1_ddrphy *phy, u8 byte, · line 1334
Quoted 10 lines
drivers/ram/stm32mp1/stm32mp1_tuning.c +3
-1+ dqs_gate_values[byte][1]); +log_debug ("*******the nominal values were system latency: 0 phase: 2*******\n" ); } }else {/* if intermitant, restore defaut values */ -pr_debug ("dqs gating:no regular fail/pass/fail found. defaults values restored.\n" ); +log_debug ("dqs gating:no regular fail/pass/fail found. defaults values restored.\n" ); dqs_gate_values[byte][0 ] =0 ; dqs_gate_values[byte][1 ] =2 ; }
Thanks
PATCH 9/33 mmc: stm32_sdmmc2: migrate trace to dev and log macro
In reply to Patrick DelaunayDefine LOG_CATEGORY, use dev_ macro when it is possible. Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
---
drivers/mmc/stm32_sdmmc2.c | 85 ++++++++++++++++++++------------------ 1 file changed, 44 insertions(+), 41 deletions(-)
drivers/mmc/stm32_sdmmc2.c +44 -41
@@ -4,6 +4,8 @@* Author(s): Patrice Chotard, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_MMC +#include <common.h> #include <clk.h> #include <cpu_func.h>
@@ -200,10 +202,11 @@ struct stm32_sdmmc2_ctx {#define SDMMC_CMD_TIMEOUT 0xFFFFFFFF#define SDMMC_BUSYD0END_TIMEOUT_US 2000000 -static void stm32_sdmmc2_start_data (struct stm32_sdmmc2_priv *priv, +static void stm32_sdmmc2_start_data (struct udevice *dev,struct mmc_data *data,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 data_ctrl, idmabase0;/* Configure the SDMMC DPSM (Data Path State Machine) */
@@ -241,10 +244,11 @@ static void stm32_sdmmc2_start_data(struct stm32_sdmmc2_priv *priv,writel (SDMMC_IDMACTRL_IDMAEN , priv->base +SDMMC_IDMACTRL ); } -static void stm32_sdmmc2_start_cmd (struct stm32_sdmmc2_priv *priv, +static void stm32_sdmmc2_start_cmd (struct udevice *dev,struct mmc_cmd *cmd,u32 cmd_param,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 timeout =0 ;if (readl (priv->base +SDMMC_CMD ) &SDMMC_CMD_CPSMEN )
@@ -290,10 +294,11 @@ static void stm32_sdmmc2_start_cmd(struct stm32_sdmmc2_priv *priv,writel (cmd_param, priv->base +SDMMC_CMD ); } -static int stm32_sdmmc2_end_cmd (struct stm32_sdmmc2_priv *priv, +static int stm32_sdmmc2_end_cmd (struct udevice *dev,struct mmc_cmd *cmd,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 mask =SDMMC_STA_CTIMEOUT ;u32 status;int ret;
@@ -311,22 +316,22 @@ static int stm32_sdmmc2_end_cmd(struct stm32_sdmmc2_priv *priv, 10000);if (ret <0 ) { -debug ("%s: timeout reading SDMMC_STA register\n" , __func__); +dev_dbg (dev,"timeout reading SDMMC_STA register\n" ); ctx->dpsm_abort = true;return ret; }/* Check status */ if (status &SDMMC_STA_CTIMEOUT ) { -debug ("%s: error SDMMC_STA_CTIMEOUT (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_CTIMEOUT (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -ETIMEDOUT ; }if (status &SDMMC_STA_CCRCFAIL && cmd->resp_type &MMC_RSP_CRC ) { -debug ("%s: error SDMMC_STA_CCRCFAIL (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_CCRCFAIL (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -EILSEQ ; }
@@ -350,15 +355,15 @@ static int stm32_sdmmc2_end_cmd(struct stm32_sdmmc2_priv *priv, SDMMC_BUSYD0END_TIMEOUT_US);if (ret <0 ) { -debug ("%s: timeout reading SDMMC_STA\n" , - __func__); +dev_dbg (dev,"timeout reading SDMMC_STA\n" ); ctx->dpsm_abort = true;return ret; }if (status &SDMMC_STA_DTIMEOUT ) { -debug ("%s: error SDMMC_STA_DTIMEOUT (0x%x)\n" , - __func__, status); +dev_dbg (dev, +"error SDMMC_STA_DTIMEOUT (0x%x)\n" , + status); ctx->dpsm_abort = true;return -ETIMEDOUT ; }
@@ -368,11 +373,12 @@ static int stm32_sdmmc2_end_cmd(struct stm32_sdmmc2_priv *priv,return 0 ; } -static int stm32_sdmmc2_end_data (struct stm32_sdmmc2_priv *priv, +static int stm32_sdmmc2_end_data (struct udevice *dev,struct mmc_cmd *cmd,struct mmc_data *data,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 mask =SDMMC_STA_DCRCFAIL |SDMMC_STA_DTIMEOUT |SDMMC_STA_IDMATE |SDMMC_STA_DATAEND ;u32 status;
@@ -394,37 +400,37 @@ static int stm32_sdmmc2_end_data(struct stm32_sdmmc2_priv *priv,invalidate_dcache_range (ctx->cache_start, ctx->cache_end);if (status &SDMMC_STA_DCRCFAIL ) { -debug ("%s: error SDMMC_STA_DCRCFAIL (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_DCRCFAIL (0x%x) for cmd %d\n" , + status, cmd->cmdidx);if (readl (priv->base +SDMMC_DCOUNT )) ctx->dpsm_abort = true;return -EILSEQ ; }if (status &SDMMC_STA_DTIMEOUT ) { -debug ("%s: error SDMMC_STA_DTIMEOUT (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_DTIMEOUT (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -ETIMEDOUT ; }if (status &SDMMC_STA_TXUNDERR ) { -debug ("%s: error SDMMC_STA_TXUNDERR (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_TXUNDERR (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -EIO ; }if (status &SDMMC_STA_RXOVERR ) { -debug ("%s: error SDMMC_STA_RXOVERR (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_RXOVERR (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -EIO ; }if (status &SDMMC_STA_IDMATE ) { -debug ("%s: error SDMMC_STA_IDMATE (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_IDMATE (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -EIO ; }
@@ -448,19 +454,18 @@ retry_cmd:if (data) { ctx.data_length = data->blocks * data->blocksize; -stm32_sdmmc2_start_data (priv, data, &ctx); +stm32_sdmmc2_start_data (dev, data, &ctx); } -stm32_sdmmc2_start_cmd (priv, cmd, cmdat, &ctx); +stm32_sdmmc2_start_cmd (dev, cmd, cmdat, &ctx); -debug ("%s: send cmd %d data: 0x%x @ 0x%x\n" , - __func__, cmd->cmdidx, - data ? ctx.data_length :0 , (unsigned int )data); +dev_dbg (dev,"send cmd %d data: 0x%x @ 0x%x\n" , + cmd->cmdidx, data ? ctx.data_length :0 , (unsigned int )data); - ret =stm32_sdmmc2_end_cmd (priv, cmd, &ctx); + ret =stm32_sdmmc2_end_cmd (dev, cmd, &ctx);if (data && !ret) - ret =stm32_sdmmc2_end_data (priv, cmd, data, &ctx); + ret =stm32_sdmmc2_end_data (dev, cmd, data, &ctx);/* Clear flags */ writel (SDMMC_ICR_STATIC_FLAGS , priv->base +SDMMC_ICR );
@@ -478,26 +483,24 @@ retry_cmd: stop_cmd.cmdarg =0 ; stop_cmd.resp_type = MMC_RSP_R1b; -debug ("%s: send STOP command to abort dpsm treatments\n" , - __func__); +dev_dbg (dev,"send STOP command to abort dpsm treatments\n" ); ctx.data_length =0 ; -stm32_sdmmc2_start_cmd (priv, &stop_cmd, +stm32_sdmmc2_start_cmd (dev, &stop_cmd,SDMMC_CMD_CMDSTOP , &ctx); -stm32_sdmmc2_end_cmd (priv, &stop_cmd, &ctx); +stm32_sdmmc2_end_cmd (dev, &stop_cmd, &ctx);writel (SDMMC_ICR_STATIC_FLAGS , priv->base +SDMMC_ICR ); }if ((ret != -ETIMEDOUT ) && (ret !=0 ) && retry) { -printf ("%s: cmd %d failed, retrying ...\n" , - __func__, cmd->cmdidx); +dev_err (dev,"cmd %d failed, retrying ...\n" , cmd->cmdidx); retry--; goto retry_cmd; } -debug ("%s: end for CMD %d, ret = %d\n" , __func__, cmd->cmdidx, ret); +dev_dbg (dev,"end for CMD %d, ret = %d\n" , cmd->cmdidx, ret);return ret; }
@@ -579,8 +582,8 @@ static int stm32_sdmmc2_set_ios(struct udevice *dev)u32 sys_clock =clk_get_rate (&priv->clk);u32 clk =0 ; -debug ("%s: bus_with = %d, clock = %d\n" , __func__, - mmc->bus_width, mmc->clock); +dev_dbg (dev,"bus_with = %d, clock = %d\n" , + mmc->bus_width, mmc->clock);if (mmc->clk_disable)stm32_sdmmc2_pwrcycle (priv);
@@ -616,7 +619,7 @@ static int stm32_sdmmc2_getcd(struct udevice *dev) {struct stm32_sdmmc2_priv *priv =dev_get_priv (dev); -debug ("stm32_sdmmc2_getcd called\n" ); +dev_dbg (dev,"%s called\n" , __func__);if (dm_gpio_is_valid (&priv->cd_gpio))return dm_gpio_get_value (&priv->cd_gpio);
@@ -695,7 +698,7 @@ static int stm32_sdmmc2_probe(struct udevice *dev)case 1 :break ;default : -pr_err ("invalid \"bus-width\" property, force to 1\n" ); +dev_err (dev,"invalid \"bus-width\" property, force to 1\n" ); } upriv->mmc = &plat->mmc;
Signature · 1 line
2.17.1
PATCH 9/33 mmc: stm32_sdmmc2: migrate trace to dev and log macro
Quoted 266 lines
Subject: [PATCH 09/33] mmc:
stm32_sdmmc2: migrate trace to dev and log macroDefine
LOG_CATEGORY, usedev_macro when it is possible. Remove the "%s:"__func__header as it is managed by dev macro (dev->nameis displayed) or log macro (CONFIG_LOGF_FUNC).Signed-off-by Patrick Delaunay <[email protected]>---
drivers/mmc/stm32_sdmmc2.c | 85 ++++++++++++++++++++------------------ 1 file changed, 44 insertions(+), 41 deletions(-)drivers/mmc/stm32_sdmmc2.c +0
-0@@ -4,6 +4,8 @@* Author(s): Patrice Chotard, <[email protected]> for STMicroelectronics.
*/drivers/mmc/stm32_sdmmc2.c +4
-2+#define LOG_CATEGORY UCLASS_MMC +#include <common.h> #include <clk.h> #include <cpu_func.h> @@ -200,10 +202,11 @@ struct stm32_sdmmc2_ctx {#define SDMMC_CMD_TIMEOUT 0xFFFFFFFF#define SDMMC_BUSYD0END_TIMEOUT_US 2000000 -static void stm32_sdmmc2_start_data (struct stm32_sdmmc2_priv *priv, +static void stm32_sdmmc2_start_data (struct udevice *dev,struct mmc_data *data,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 data_ctrl, idmabase0; /* Configure the SDMMC DPSM (Data Path State Machine) */ @@ -241,10 +244,11 @@ static void stm32_sdmmc2_start_data(struct
stm32_sdmmc2_priv*priv,
writel(SDMMC_IDMACTRL_IDMAEN,priv->base+SDMMC_IDMACTRL); }drivers/mmc/stm32_sdmmc2.c +2
-2-static void stm32_sdmmc2_start_cmd (struct stm32_sdmmc2_priv *priv, +static void stm32_sdmmc2_start_cmd (struct udevice *dev,struct mmc_cmd *cmd,u32 cmd_param,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 timeout =0 ; if (readl(priv->base + SDMMC_CMD) & SDMMC_CMD_CPSMEN) @@ -290,10 +294,11 @@ static void stm32_sdmmc2_start_cmd(struct
stm32_sdmmc2_priv*priv,drivers/mmc/stm32_sdmmc2.c +7
-6writel (cmd_param, priv->base +SDMMC_CMD ); } -static int stm32_sdmmc2_end_cmd (struct stm32_sdmmc2_priv *priv, +static int stm32_sdmmc2_end_cmd (struct udevice *dev,struct mmc_cmd *cmd,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 mask =SDMMC_STA_CTIMEOUT ;u32 status;int ret;@@ -311,22 +316,22 @@ static int stm32_sdmmc2_end_cmd(struct stm32_sdmmc2_priv *priv, 10000);if (ret <0 ) { -debug ("%s: timeout reading SDMMC_STA register\n" , __func__); +dev_dbg (dev,"timeout reading SDMMC_STA register\n" ); ctx->dpsm_abort = true;return ret; }/* Check status */ if (status &SDMMC_STA_CTIMEOUT ) { -debug ("%s: error SDMMC_STA_CTIMEOUT (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); + dev_dbg(dev, "error SDMMC_STA_CTIMEOUT (0x%x) for cmd %d\n", + status, cmd->cmdidx); ctx->dpsm_abort = true;return -ETIMEDOUT ; }if (status &SDMMC_STA_CCRCFAIL && cmd->resp_type &MMC_RSP_CRC ) { -debug ("%s: error SDMMC_STA_CCRCFAIL (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_CCRCFAIL (0x%x) for cmd %d\n" , + status, cmd->cmdidx);drivers/mmc/stm32_sdmmc2.c +4
-4ctx->dpsm_abort = true;return -EILSEQ ; }@@ -350,15 +355,15 @@ static int stm32_sdmmc2_end_cmd(structstm32_sdmmc2_priv *priv, SDMMC_BUSYD0END_TIMEOUT_US);if (ret <0 ) { -debug ("%s: timeout reading SDMMC_STA\n" , - __func__); +dev_dbg (dev,"timeout reading SDMMC_STA\n" ); ctx->dpsm_abort = true;return ret; }if (status &SDMMC_STA_DTIMEOUT ) { -debug ("%s: error SDMMC_STA_DTIMEOUT (0x%x)\n" , - __func__, status); +dev_dbg (dev, +"error SDMMC_STA_DTIMEOUT (0x%x)\n" , + status); ctx->dpsm_abort = true;return -ETIMEDOUT ;drivers/mmc/stm32_sdmmc2.c +2
-1}@@ -368,11 +373,12 @@ static int stm32_sdmmc2_end_cmd(structstm32_sdmmc2_priv *priv, return 0; } -static int stm32_sdmmc2_end_data (struct stm32_sdmmc2_priv *priv, +static int stm32_sdmmc2_end_data (struct udevice *dev,struct mmc_cmd *cmd,struct mmc_data *data,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 mask =SDMMC_STA_DCRCFAIL |SDMMC_STA_DTIMEOUT |SDMMC_STA_IDMATE |SDMMC_STA_DATAEND ;drivers/mmc/stm32_sdmmc2.c +10
-10u32 status;@@ -394,37 +400,37 @@ static int stm32_sdmmc2_end_data(struct stm32_sdmmc2_priv *priv,invalidate_dcache_range (ctx->cache_start, ctx->cache_end);if (status &SDMMC_STA_DCRCFAIL ) { -debug ("%s: error SDMMC_STA_DCRCFAIL (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_DCRCFAIL (0x%x) for cmd %d\n" , + status, cmd->cmdidx);if (readl (priv->base +SDMMC_DCOUNT )) ctx->dpsm_abort = true;return -EILSEQ ; }if (status &SDMMC_STA_DTIMEOUT ) { -debug ("%s: error SDMMC_STA_DTIMEOUT (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); + dev_dbg(dev, "error SDMMC_STA_DTIMEOUT (0x%x) for cmd %d\n", + status, cmd->cmdidx); ctx->dpsm_abort = true;return -ETIMEDOUT ; }if (status &SDMMC_STA_TXUNDERR ) { -debug ("%s: error SDMMC_STA_TXUNDERR (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); + dev_dbg(dev, "error SDMMC_STA_TXUNDERR (0x%x) for cmd %d\n", + status, cmd->cmdidx); ctx->dpsm_abort = true;return -EIO ; }if (status &SDMMC_STA_RXOVERR ) { -debug ("%s: error SDMMC_STA_RXOVERR (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_RXOVERR (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -EIO ; }if (status &SDMMC_STA_IDMATE ) { -debug ("%s: error SDMMC_STA_IDMATE (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_IDMATE (0x%x) for cmd %d\n" , + status, cmd->cmdidx);drivers/mmc/stm32_sdmmc2.c +13
-17ctx->dpsm_abort = true;return -EIO ; }@@ -448,19 +454,18 @@ retry_cmd:if (data) { ctx.data_length = data->blocks * data->blocksize; -stm32_sdmmc2_start_data (priv, data, &ctx); +stm32_sdmmc2_start_data (dev, data, &ctx); } -stm32_sdmmc2_start_cmd (priv, cmd, cmdat, &ctx); +stm32_sdmmc2_start_cmd (dev, cmd, cmdat, &ctx); -debug ("%s: send cmd %d data: 0x%x @ 0x%x\n" , - __func__, cmd->cmdidx, - data ? ctx.data_length :0 , (unsigned int )data); +dev_dbg (dev,"send cmd %d data: 0x%x @ 0x%x\n" , + cmd->cmdidx, data ? ctx.data_length :0 , (unsigned int )data); - ret =stm32_sdmmc2_end_cmd (priv, cmd, &ctx); + ret =stm32_sdmmc2_end_cmd (dev, cmd, &ctx);if (data && !ret) - ret =stm32_sdmmc2_end_data (priv, cmd, data, &ctx); + ret =stm32_sdmmc2_end_data (dev, cmd, data, &ctx);/* Clear flags */ writel(SDMMC_ICR_STATIC_FLAGS, priv->base + SDMMC_ICR); @@ -478,26 +483,24 @@ retry_cmd: stop_cmd.cmdarg =0 ; stop_cmd.resp_type = MMC_RSP_R1b; -debug ("%s: send STOP command to abort dpsm treatments\n" , - __func__); +dev_dbg (dev,"send STOP command to abort dpsm treatments\n" ); ctx.data_length =0 ; -stm32_sdmmc2_start_cmd (priv, &stop_cmd, +stm32_sdmmc2_start_cmd (dev, &stop_cmd,SDMMC_CMD_CMDSTOP , &ctx); -stm32_sdmmc2_end_cmd (priv, &stop_cmd, &ctx); +stm32_sdmmc2_end_cmd (dev, &stop_cmd, &ctx);writel (SDMMC_ICR_STATIC_FLAGS , priv->base +SDMMC_ICR ); }if ((ret != -ETIMEDOUT ) && (ret !=0 ) && retry) { -printf ("%s: cmd %d failed, retrying ...\n" , - __func__, cmd->cmdidx); +dev_err (dev,"cmd %d failed, retrying ...\n" , cmd->cmdidx); retry--; goto retry_cmd; } -debug ("%s: end for CMD %d, ret = %d\n" , __func__, cmd->cmdidx, ret); +dev_dbg (dev,"end for CMD %d, ret = %d\n" , cmd->cmdidx, ret);return ret; }@@ -579,8 +582,8 @@ static int stm32_sdmmc2_set_ios(struct udevice *dev)u32 sys_clock =clk_get_rate (&priv->clk);u32 clk =0 ; -debug ("%s: bus_with = %d, clock = %d\n" , __func__, - mmc->bus_width, mmc->clock); +dev_dbg (dev,"bus_with = %d, clock = %d\n" , + mmc->bus_width, mmc->clock);if (mmc->clk_disable)drivers/mmc/stm32_sdmmc2.c +1
-1stm32_sdmmc2_pwrcycle (priv);@@ -616,7 +619,7 @@ static int stm32_sdmmc2_getcd(struct udevice *dev) {struct stm32_sdmmc2_priv *priv =dev_get_priv (dev); -debug ("stm32_sdmmc2_getcd called\n" ); +dev_dbg (dev,"%s called\n" , __func__);if (dm_gpio_is_valid (&priv->cd_gpio))return dm_gpio_get_value (&priv->cd_gpio);
drivers/mmc/stm32_sdmmc2.c static int stm32_sdmmc2_probe(struct udevice *dev)
Quoted 9 lines
drivers/mmc/stm32_sdmmc2.c +1
-2@@ -695,7 +698,7 @@ static int stm32_sdmmc2_probe(struct udevice *dev)case 1 :break ;default : -pr_err ("invalid \"bus-width\" property, force to 1\n" ); +dev_err (dev,"invalid \"bus-width\" property, force to 1\n" ); } upriv->mmc = &plat->mmc; --
PATCH 9/33 mmc: stm32_sdmmc2: migrate trace to dev and log macro
In reply to Patrick DelaunayHi Patrick
Quoted 251 lines · Patrick Delaunay
Define
LOG_CATEGORY, usedev_macro when it is possible. Remove the "%s:"__func__header as it is managed by dev macro (dev->nameis displayed) or log macro (CONFIG_LOGF_FUNC).Signed-off-by Patrick Delaunay <[email protected]>---
drivers/mmc/stm32_sdmmc2.c | 85 ++++++++++++++++++++------------------ 1 file changed, 44 insertions(+), 41 deletions(-)drivers/mmc/stm32_sdmmc2.c +43
-40@@ -4,6 +4,8 @@* Author(s): Patrice Chotard, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_MMC +#include <common.h> #include <clk.h> #include <cpu_func.h> @@ -200,10 +202,11 @@ struct stm32_sdmmc2_ctx {#define SDMMC_CMD_TIMEOUT 0xFFFFFFFF#define SDMMC_BUSYD0END_TIMEOUT_US 2000000 -static void stm32_sdmmc2_start_data (struct stm32_sdmmc2_priv *priv, +static void stm32_sdmmc2_start_data (struct udevice *dev,struct mmc_data *data,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 data_ctrl, idmabase0;/* Configure the SDMMC DPSM (Data Path State Machine) */ @@ -241,10 +244,11 @@ static void stm32_sdmmc2_start_data(struct stm32_sdmmc2_priv *priv,writel (SDMMC_IDMACTRL_IDMAEN , priv->base +SDMMC_IDMACTRL ); } -static void stm32_sdmmc2_start_cmd (struct stm32_sdmmc2_priv *priv, +static void stm32_sdmmc2_start_cmd (struct udevice *dev,struct mmc_cmd *cmd,u32 cmd_param,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 timeout =0 ;if (readl (priv->base +SDMMC_CMD ) &SDMMC_CMD_CPSMEN )@@ -290,10 +294,11 @@ static void stm32_sdmmc2_start_cmd(struct stm32_sdmmc2_priv *priv,writel (cmd_param, priv->base +SDMMC_CMD ); } -static int stm32_sdmmc2_end_cmd (struct stm32_sdmmc2_priv *priv, +static int stm32_sdmmc2_end_cmd (struct udevice *dev,struct mmc_cmd *cmd,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 mask =SDMMC_STA_CTIMEOUT ;u32 status;int ret;@@ -311,22 +316,22 @@ static int stm32_sdmmc2_end_cmd(struct stm32_sdmmc2_priv *priv, 10000);if (ret <0 ) { -debug ("%s: timeout reading SDMMC_STA register\n" , __func__); +dev_dbg (dev,"timeout reading SDMMC_STA register\n" ); ctx->dpsm_abort = true;return ret; }/* Check status */ if (status &SDMMC_STA_CTIMEOUT ) { -debug ("%s: error SDMMC_STA_CTIMEOUT (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_CTIMEOUT (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -ETIMEDOUT ; }if (status &SDMMC_STA_CCRCFAIL && cmd->resp_type &MMC_RSP_CRC ) { -debug ("%s: error SDMMC_STA_CCRCFAIL (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_CCRCFAIL (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -EILSEQ ; }@@ -350,15 +355,15 @@ static int stm32_sdmmc2_end_cmd(struct stm32_sdmmc2_priv *priv, SDMMC_BUSYD0END_TIMEOUT_US);if (ret <0 ) { -debug ("%s: timeout reading SDMMC_STA\n" , - __func__); +dev_dbg (dev,"timeout reading SDMMC_STA\n" ); ctx->dpsm_abort = true;return ret; }if (status &SDMMC_STA_DTIMEOUT ) { -debug ("%s: error SDMMC_STA_DTIMEOUT (0x%x)\n" , - __func__, status); +dev_dbg (dev, +"error SDMMC_STA_DTIMEOUT (0x%x)\n" , + status); ctx->dpsm_abort = true;return -ETIMEDOUT ; }@@ -368,11 +373,12 @@ static int stm32_sdmmc2_end_cmd(struct stm32_sdmmc2_priv *priv,return 0 ; } -static int stm32_sdmmc2_end_data (struct stm32_sdmmc2_priv *priv, +static int stm32_sdmmc2_end_data (struct udevice *dev,struct mmc_cmd *cmd,struct mmc_data *data,struct stm32_sdmmc2_ctx *ctx) { +struct stm32_sdmmc2_priv *priv =dev_get_priv (dev);u32 mask =SDMMC_STA_DCRCFAIL |SDMMC_STA_DTIMEOUT |SDMMC_STA_IDMATE |SDMMC_STA_DATAEND ;u32 status;@@ -394,37 +400,37 @@ static int stm32_sdmmc2_end_data(struct stm32_sdmmc2_priv *priv,invalidate_dcache_range (ctx->cache_start, ctx->cache_end);if (status &SDMMC_STA_DCRCFAIL ) { -debug ("%s: error SDMMC_STA_DCRCFAIL (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_DCRCFAIL (0x%x) for cmd %d\n" , + status, cmd->cmdidx);if (readl (priv->base +SDMMC_DCOUNT )) ctx->dpsm_abort = true;return -EILSEQ ; }if (status &SDMMC_STA_DTIMEOUT ) { -debug ("%s: error SDMMC_STA_DTIMEOUT (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_DTIMEOUT (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -ETIMEDOUT ; }if (status &SDMMC_STA_TXUNDERR ) { -debug ("%s: error SDMMC_STA_TXUNDERR (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_TXUNDERR (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -EIO ; }if (status &SDMMC_STA_RXOVERR ) { -debug ("%s: error SDMMC_STA_RXOVERR (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_RXOVERR (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -EIO ; }if (status &SDMMC_STA_IDMATE ) { -debug ("%s: error SDMMC_STA_IDMATE (0x%x) for cmd %d\n" , - __func__, status, cmd->cmdidx); +dev_dbg (dev,"error SDMMC_STA_IDMATE (0x%x) for cmd %d\n" , + status, cmd->cmdidx); ctx->dpsm_abort = true;return -EIO ; }@@ -448,19 +454,18 @@ retry_cmd:if (data) { ctx.data_length = data->blocks * data->blocksize; -stm32_sdmmc2_start_data (priv, data, &ctx); +stm32_sdmmc2_start_data (dev, data, &ctx); } -stm32_sdmmc2_start_cmd (priv, cmd, cmdat, &ctx); +stm32_sdmmc2_start_cmd (dev, cmd, cmdat, &ctx); -debug ("%s: send cmd %d data: 0x%x @ 0x%x\n" , - __func__, cmd->cmdidx, - data ? ctx.data_length :0 , (unsigned int )data); +dev_dbg (dev,"send cmd %d data: 0x%x @ 0x%x\n" , + cmd->cmdidx, data ? ctx.data_length :0 , (unsigned int )data); - ret =stm32_sdmmc2_end_cmd (priv, cmd, &ctx); + ret =stm32_sdmmc2_end_cmd (dev, cmd, &ctx);if (data && !ret) - ret =stm32_sdmmc2_end_data (priv, cmd, data, &ctx); + ret =stm32_sdmmc2_end_data (dev, cmd, data, &ctx);/* Clear flags */ writel (SDMMC_ICR_STATIC_FLAGS , priv->base +SDMMC_ICR );@@ -478,26 +483,24 @@ retry_cmd: stop_cmd.cmdarg =0 ; stop_cmd.resp_type = MMC_RSP_R1b; -debug ("%s: send STOP command to abort dpsm treatments\n" , - __func__); +dev_dbg (dev,"send STOP command to abort dpsm treatments\n" ); ctx.data_length =0 ; -stm32_sdmmc2_start_cmd (priv, &stop_cmd, +stm32_sdmmc2_start_cmd (dev, &stop_cmd,SDMMC_CMD_CMDSTOP , &ctx); -stm32_sdmmc2_end_cmd (priv, &stop_cmd, &ctx); +stm32_sdmmc2_end_cmd (dev, &stop_cmd, &ctx);writel (SDMMC_ICR_STATIC_FLAGS , priv->base +SDMMC_ICR ); }if ((ret != -ETIMEDOUT ) && (ret !=0 ) && retry) { -printf ("%s: cmd %d failed, retrying ...\n" , - __func__, cmd->cmdidx); +dev_err (dev,"cmd %d failed, retrying ...\n" , cmd->cmdidx); retry--; goto retry_cmd; } -debug ("%s: end for CMD %d, ret = %d\n" , __func__, cmd->cmdidx, ret); +dev_dbg (dev,"end for CMD %d, ret = %d\n" , cmd->cmdidx, ret);return ret; }@@ -579,8 +582,8 @@ static int stm32_sdmmc2_set_ios(struct udevice *dev)u32 sys_clock =clk_get_rate (&priv->clk);u32 clk =0 ; -debug ("%s: bus_with = %d, clock = %d\n" , __func__, - mmc->bus_width, mmc->clock); +dev_dbg (dev,"bus_with = %d, clock = %d\n" , + mmc->bus_width, mmc->clock);if (mmc->clk_disable)stm32_sdmmc2_pwrcycle (priv);@@ -616,7 +619,7 @@ static int stm32_sdmmc2_getcd(struct udevice *dev) {struct stm32_sdmmc2_priv *priv =dev_get_priv (dev); -debug ("stm32_sdmmc2_getcd called\n" ); +dev_dbg (dev,"%s called\n" , __func__);if (dm_gpio_is_valid (&priv->cd_gpio))return dm_gpio_get_value (&priv->cd_gpio);
drivers/mmc/stm32_sdmmc2.c static int stm32_sdmmc2_probe(struct udevice *dev) · line 704
Quoted 8 lines
drivers/mmc/stm32_sdmmc2.c +1
-1@@ -695,7 +698,7 @@ static int stm32_sdmmc2_probe(struct udevice *dev)case 1 :break ;default : -pr_err ("invalid \"bus-width\" property, force to 1\n" ); +dev_err (dev,"invalid \"bus-width\" property, force to 1\n" ); } upriv->mmc = &plat->mmc;
Thanks
PATCH 10/33 timer: stm32: migrate trace to log macro
In reply to Patrick DelaunayDefine LOG_CATEGORY to allow filtering with log command.
---
drivers/timer/stm32_timer.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/timer/stm32_timer.c +2 -0
@@ -4,6 +4,8 @@* Author(s): Patrice Chotard, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_TIMER +#include <common.h> #include <clk.h> #include <dm.h>
Signature · 1 line
2.17.1
PATCH 10/33 timer: stm32: migrate trace to log macro
Hi Patrick
Quoted 13 lines · Patrick Delaunay
Define
LOG_CATEGORYto allow filtering with log command.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/timer/stm32_timer.c | 2 ++ 1 file changed, 2 insertions(+)drivers/timer/stm32_timer.c +0
-0
drivers/timer/stm32_timer.c line 11
Quoted 8 lines
drivers/timer/stm32_timer.c +2
-0@@ -4,6 +4,8 @@* Author(s): Patrice Chotard, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_TIMER +#include <common.h> #include <clk.h> #include <dm.h>
Thanks
PATCH 11/33 hwspinlock: stm32: migrate trace to log macro
In reply to Patrick DelaunayDefine LOG_CATEGORY to allow filtering with log command.
---
drivers/hwspinlock/stm32_hwspinlock.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/hwspinlock/stm32_hwspinlock.c +2 -0
@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_HWSPINLOCK +#include <common.h> #include <clk.h> #include <dm.h>
Signature · 1 line
2.17.1
PATCH 11/33 hwspinlock: stm32: migrate trace to log macro
Hi Patrick
Quoted 13 lines · Patrick Delaunay
Define
LOG_CATEGORYto allow filtering with log command.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/hwspinlock/stm32_hwspinlock.c | 2 ++ 1 file changed, 2 insertions(+)drivers/hwspinlock/stm32_hwspinlock.c +0
-0
drivers/hwspinlock/stm32_hwspinlock.c line 10
Quoted 8 lines
drivers/hwspinlock/stm32_hwspinlock.c +2
-0@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_HWSPINLOCK +#include <common.h> #include <clk.h> #include <dm.h>
Thanks
PATCH 12/33 rtc: stm32: migrate trace to log macro
In reply to Patrick DelaunayDefine LOG_CATEGORY to allow filtering with log command.
---
drivers/rtc/stm32_rtc.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/rtc/stm32_rtc.c +3 -0
@@ -2,6 +2,9 @@/* * Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ + +#define LOG_CATEGORY UCLASS_RTC +#include <common.h> #include <clk.h> #include <dm.h>
Signature · 1 line
2.17.1
PATCH 12/33 rtc: stm32: migrate trace to log macro
Hi Patrick
Quoted 13 lines · Patrick Delaunay
Define
LOG_CATEGORYto allow filtering with log command.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/rtc/stm32_rtc.c | 3 +++ 1 file changed, 3 insertions(+)drivers/rtc/stm32_rtc.c +0
-0
drivers/rtc/stm32_rtc.c line 10
Quoted 9 lines
drivers/rtc/stm32_rtc.c +3
-0@@ -2,6 +2,9 @@/* * Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ + +#define LOG_CATEGORY UCLASS_RTC +#include <common.h> #include <clk.h> #include <dm.h>
Thanks
PATCH 13/33 watchdog: stm32mp: migrate trace to dev macro
In reply to Patrick DelaunayChange debug and pr_err to dev macro and define LOG_CATEGORY.
---
drivers/watchdog/stm32mp_wdt.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/watchdog/stm32mp_wdt.c +6 -3
@@ -3,6 +3,8 @@* Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_WDT +#include <common.h> #include <clk.h> #include <dm.h>
@@ -10,6 +12,7 @@#include <syscon.h> #include <wdt.h> #include <asm/io.h> +#include <dm/device_compat.h> #include <linux/bitops.h> #include <linux/iopoll.h>
@@ -77,7 +80,7 @@ static int stm32mp_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) val & (SR_PVU | SR_RVU), CONFIG_SYS_HZ);if (ret <0 ) { -pr_err ("Updating IWDG registers timeout" ); +dev_err (dev,"Updating IWDG registers timeout" );return -ETIMEDOUT ; }
@@ -90,7 +93,7 @@ static int stm32mp_wdt_probe(struct udevice *dev)struct clk clk;int ret; -debug ("IWDG init\n" ); +dev_dbg (dev,"IWDG init\n" ); priv->base =dev_read_addr (dev);if (priv->base ==FDT_ADDR_T_NONE )
@@ -112,7 +115,7 @@ static int stm32mp_wdt_probe(struct udevice *dev) priv->wdt_clk_rate =clk_get_rate (&clk); -debug ("IWDG init done\n" ); +dev_dbg (dev,"IWDG init done\n" );return 0 ; }
Signature · 1 line
2.17.1
PATCH 13/33 watchdog: stm32mp: migrate trace to dev macro
Hi Patrick
Quoted 48 lines · Patrick Delaunay
Change debug and
pr_errto dev macro and defineLOG_CATEGORY.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/watchdog/stm32mp_wdt.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)drivers/watchdog/stm32mp_wdt.c +5
-2@@ -3,6 +3,8 @@* Copyright (C) 2019, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_WDT +#include <common.h> #include <clk.h> #include <dm.h> @@ -10,6 +12,7 @@#include <syscon.h> #include <wdt.h> #include <asm/io.h> +#include <dm/device_compat.h> #include <linux/bitops.h> #include <linux/iopoll.h> @@ -77,7 +80,7 @@ static int stm32mp_wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags) val & (SR_PVU | SR_RVU), CONFIG_SYS_HZ);if (ret <0 ) { -pr_err ("Updating IWDG registers timeout" ); +dev_err (dev,"Updating IWDG registers timeout" );return -ETIMEDOUT ; }@@ -90,7 +93,7 @@ static int stm32mp_wdt_probe(struct udevice *dev)struct clk clk;int ret; -debug ("IWDG init\n" ); +dev_dbg (dev,"IWDG init\n" ); priv->base =dev_read_addr (dev);if (priv->base ==FDT_ADDR_T_NONE )
drivers/watchdog/stm32mp_wdt.c static int stm32mp_wdt_probe(struct udevice *dev) · line 121
Quoted 8 lines
drivers/watchdog/stm32mp_wdt.c +1
-1@@ -112,7 +115,7 @@ static int stm32mp_wdt_probe(struct udevice *dev) priv->wdt_clk_rate =clk_get_rate (&clk); -debug ("IWDG init done\n" ); +dev_dbg (dev,"IWDG init done\n" );return 0 ; }
Thanks
PATCH 14/33 power: regulator: stm32-verfbuf: define LOG_CATEGORY
In reply to Patrick DelaunayDefine LOG_CATEGORY to allow filtering with log command.
---
drivers/power/regulator/stm32-vrefbuf.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/power/regulator/stm32-vrefbuf.c +2 -0
@@ -6,6 +6,8 @@* Originally based on the Linux kernel v4.16 drivers/regulator/stm32-vrefbuf.c */ +#define LOG_CATEGORY UCLASS_REGULATOR +#include <common.h> #include <clk.h> #include <dm.h>
Signature · 1 line
2.17.1
PATCH 14/33 power: regulator: stm32-verfbuf: define LOG_CATEGORY
Hi Patrick
Quoted 13 lines · Patrick Delaunay
Define
LOG_CATEGORYto allow filtering with log command.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/power/regulator/stm32-vrefbuf.c | 2 ++ 1 file changed, 2 insertions(+)drivers/power/regulator/stm32-vrefbuf.c +0
-0
drivers/power/regulator/stm32-vrefbuf.c line 13
Quoted 8 lines
drivers/power/regulator/stm32-vrefbuf.c +2
-0@@ -6,6 +6,8 @@* Originally based on the Linux kernel v4.16 drivers/regulator/stm32-vrefbuf.c */ +#define LOG_CATEGORY UCLASS_REGULATOR +#include <common.h> #include <clk.h> #include <dm.h>
Thanks
PATCH 15/33 misc: rcc: migrate trace to dev macro
In reply to Patrick DelaunayChange debug and pr_err to dev macro and define LOG_CATEGORY.
---
drivers/misc/stm32_rcc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/misc/stm32_rcc.c +4 -2
@@ -4,6 +4,8 @@* Author(s): Patrice Chotard, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_NOP +#include <common.h> #include <dm.h> #include <log.h>
@@ -45,10 +47,10 @@ static int stm32_rcc_bind(struct udevice *dev) (struct stm32_rcc_clk *)dev_get_driver_data (dev);int ret; -debug ("%s(dev=%p)\n" , __func__, dev); +dev_dbg (dev,"RCC bind\n" ); drv =lists_driver_lookup_name (rcc_clk->drv_name);if (!drv) { -debug ("Cannot find driver '%s'\n" , rcc_clk->drv_name); +dev_err (dev,"Cannot find driver '%s'\n" , rcc_clk->drv_name);return -ENOENT ; }
Signature · 1 line
2.17.1
PATCH 15/33 misc: rcc: migrate trace to dev macro
Hi Patrick
Quoted 24 lines · Patrick Delaunay
Change debug and
pr_errto dev macro and defineLOG_CATEGORY.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/misc/stm32_rcc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)drivers/misc/stm32_rcc.c +2
-0@@ -4,6 +4,8 @@* Author(s): Patrice Chotard, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_NOP +#include <common.h> #include <dm.h> #include <log.h> @@ -45,10 +47,10 @@ static int stm32_rcc_bind(struct udevice *dev) (struct stm32_rcc_clk *)dev_get_driver_data (dev);int ret;
drivers/misc/stm32_rcc.c static int stm32_rcc_bind(struct udevice *dev) · line 56
Quoted 10 lines
drivers/misc/stm32_rcc.c +2
-2-debug ("%s(dev=%p)\n" , __func__, dev); +dev_dbg (dev,"RCC bind\n" ); drv =lists_driver_lookup_name (rcc_clk->drv_name);if (!drv) { -debug ("Cannot find driver '%s'\n" , rcc_clk->drv_name); +dev_err (dev,"Cannot find driver '%s'\n" , rcc_clk->drv_name);return -ENOENT ; }
Thanks
PATCH 16/33 misc: rcc: keep the rcc device name for subnode
In reply to Patrick DelaunayUpdate the name associated with the RCC drivers to avoid duplicated name with the driver name.
With this patch the traces displayed with log macro provide a correct device name.
The rcc device name before the patch is:
Class Index Probed Driver Name
-----------------------------------------------------------
root 0 [ + ] root_driver root_driver simple_bus 0 [ + ] simple_bus |-- soc (...) nop 0 [ + ] stm32-rcc | |-- rcc at 50000000 clk 0 [ + ] stm32mp1_clk | | |-- stm32mp1_clk reset 0 [ + ] stm32_rcc_reset | | `-- stm32_rcc_reset
And they become:
(...)
nop 0 [ + ] stm32-rcc | |-- rcc at 50000000 clk 0 [ + ] stm32mp1_clk | | |-- rcc at 50000000 reset 0 [ + ] stm32_rcc_reset | | `-- rcc at 50000000
The traces is correct:stm32mp1_clk rcc at stm32mp1_clk: .....
=>stm32mp1_clk rcc at 50000000: .....
---
drivers/misc/stm32_rcc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/misc/stm32_rcc.c +2 -2
@@ -54,7 +54,7 @@ static int stm32_rcc_bind(struct udevice *dev)return -ENOENT ; } - ret =device_bind_with_driver_data (dev, drv, rcc_clk->drv_name, + ret =device_bind_with_driver_data (dev, drv, dev->name, rcc_clk->soc,dev_ofnode (dev), &child);
@@ -67,7 +67,7 @@ static int stm32_rcc_bind(struct udevice *dev)return -ENOENT ; } -return device_bind_with_driver_data (dev, drv,"stm32_rcc_reset" , +return device_bind_with_driver_data (dev, drv, dev->name, rcc_clk->soc,dev_ofnode (dev), &child); }
Signature · 1 line
2.17.1
PATCH 16/33 misc: rcc: keep the rcc device name for subnode
Hi Patrick
Quoted 49 lines · Patrick Delaunay
Update the name associated with the RCC drivers to avoid duplicated name with the driver name.
With this patch the traces displayed with log macro provide a correct device name.
The rcc device name before the patch is:
Class Index Probed Driver Name
-----------------------------------------------------------root 0 [ + ] root_driver root_driver simple_bus 0 [ + ] simple_bus |-- soc (...) nop 0 [ + ] stm32-rcc | |-- rcc at 50000000 clk 0 [ + ] stm32mp1_clk | | |-- stm32mp1_clk reset 0 [ + ] stm32_rcc_reset | | `-- stm32_rcc_resetAnd they become:
(...)nop 0 [ + ] stm32-rcc | |-- rcc at 50000000 clk 0 [ + ] stm32mp1_clk | | |-- rcc at 50000000 reset 0 [ + ] stm32_rcc_reset | | `-- rcc at 50000000The traces is correct:
stm32mp1_clkrcc atstm32mp1_clk: .....
=>stm32mp1_clkrcc at 50000000: .....Signed-off-by Patrick Delaunay <[email protected]>---
drivers/misc/stm32_rcc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/misc/stm32_rcc.c +1
-1@@ -54,7 +54,7 @@ static int stm32_rcc_bind(struct udevice *dev)return -ENOENT ; } - ret =device_bind_with_driver_data (dev, drv, rcc_clk->drv_name, + ret =device_bind_with_driver_data (dev, drv, dev->name, rcc_clk->soc,dev_ofnode (dev), &child);
drivers/misc/stm32_rcc.c static int stm32_rcc_bind(struct udevice *dev) · line 73
Quoted 8 lines
drivers/misc/stm32_rcc.c +1
-1@@ -67,7 +67,7 @@ static int stm32_rcc_bind(struct udevice *dev)return -ENOENT ; } -return device_bind_with_driver_data (dev, drv,"stm32_rcc_reset" , +return device_bind_with_driver_data (dev, drv, dev->name, rcc_clk->soc,dev_ofnode (dev), &child); }
Thanks
PATCH 17/33 clk: stm32mp1: migrate trace to dev and log macro
In reply to Patrick DelaunayChange debug and pr_ macro to dev macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
---
drivers/clk/clk_stm32mp1.c | 147 ++++++++++++++++++------------------- 1 file changed, 71 insertions(+), 76 deletions(-)
drivers/clk/clk_stm32mp1.c +71 -76
@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_CLK +#include <common.h> #include <clk-uclass.h> #include <div64.h>
@@ -14,12 +16,13 @@#include <syscon.h> #include <time.h> #include <vsprintf.h> -#include <linux/bitops.h> -#include <linux/io.h> -#include <linux/iopoll.h> #include <asm/arch/sys_proto.h> +#include <dm/device_compat.h> #include <dt-bindings/clock/stm32mp1-clks.h> #include <dt-bindings/clock/stm32mp1-clksrc.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/iopoll.h> DECLARE_GLOBAL_DATA_PTR ;
@@ -781,7 +784,7 @@ static const struct stm32mp1_clk_data stm32mp1_data = {static ulong stm32mp1_clk_get_fixed (struct stm32mp1_clk_priv *priv,int idx) {if (idx >=NB_OSC ) { -debug ("%s: clk id %d not found\n" , __func__, idx); +log_debug ("clk id %d not found\n" , idx);return 0 ; }
@@ -799,7 +802,7 @@ static int stm32mp1_clk_get_id(struct stm32mp1_clk_priv *priv, unsigned long id) }if (i == nb_clks) { -printf ("%s: clk id %d not found\n" , __func__, (u32 )id); +log_err ("clk id %d not found\n" , (u32 )id);return -EINVAL ; }
@@ -812,8 +815,7 @@ static int stm32mp1_clk_get_sel(struct stm32mp1_clk_priv *priv,const struct stm32mp1_clk_gate *gate = priv->data->gate;if (gate[i].sel > _PARENT_SEL_NB) { -printf ("%s: parents for clk id %d not found\n" , - __func__, i); +log_err ("parents for clk id %d not found\n" , i);return -EINVAL ; }
@@ -858,17 +860,14 @@ static int stm32mp1_clk_get_parent(struct stm32mp1_clk_priv *priv, p = (readl (priv->base + sel[s].offset) >> sel[s].src) & sel[s].msk;if (p < sel[s].nb_parent) { -#ifdef DEBUG -debug ("%s: %s clock is the parent %s of clk id %d\n" , __func__, - stm32mp1_clk_parent_name[sel[s].parent[p]], - stm32mp1_clk_parent_sel_name[s], - (u32 )id); -#endif +log_content ("%s clock is the parent %s of clk id %d\n" , + stm32mp1_clk_parent_name[sel[s].parent[p]], + stm32mp1_clk_parent_sel_name[s], + (u32 )id);return sel[s].parent[p]; } -pr_err ("%s: no parents defined for clk id %d\n" , - __func__, (u32 )id); +log_err ("no parents defined for clk id %d\n" , (u32 )id);return -EINVAL ; }
@@ -1124,7 +1123,7 @@ static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p)if (!uclass_get_device_by_name (UCLASS_CLK ,"ck_dsi_phy" , &dev)) {if (clk_request (dev, &clk)) { -pr_err ("ck_dsi_phy request" ); +log_err ("ck_dsi_phy request" ); }else { clk.id =0 ; clock =clk_get_rate (&clk);
@@ -1136,8 +1135,7 @@ static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p)break ; } -debug ("%s(%d) clock = %lx : %ld kHz\n" , - __func__, p, clock, clock /1000 ); +log_debug ("id=%d clock = %lx : %ld kHz\n" , p, clock, clock /1000 );return clock; }
@@ -1156,7 +1154,7 @@ static int stm32mp1_clk_enable(struct clk *clk)else setbits_le32 (priv->base + gate[i].offset,BIT (gate[i].bit)); -debug ("%s: id clock %d has been enabled\n" , __func__, (u32 )clk->id); +dev_dbg (clk->dev,"%s: id clock %d has been enabled\n" , __func__, (u32 )clk->id);return 0 ; }
@@ -1177,7 +1175,7 @@ static int stm32mp1_clk_disable(struct clk *clk)else clrbits_le32 (priv->base + gate[i].offset,BIT (gate[i].bit)); -debug ("%s: id clock %d has been disabled\n" , __func__, (u32 )clk->id); +dev_dbg (clk->dev,"%s: id clock %d has been disabled\n" , __func__, (u32 )clk->id);return 0 ; }
@@ -1193,10 +1191,9 @@ static ulong stm32mp1_clk_get_rate(struct clk *clk) rate =stm32mp1_clk_get (priv, p); -#ifdef DEBUG -debug ("%s: computed rate for id clock %d is %d (parent is %s)\n" , - __func__, (u32 )clk->id, (u32 )rate, stm32mp1_clk_parent_name[p]); -#endif +dev_vdbg (clk->dev,"computed rate for id clock %d is %d (parent is %s)\n" , + (u32 )clk->id, (u32 )rate, stm32mp1_clk_parent_name[p]); +return rate; }
@@ -1335,7 +1332,7 @@ static int stm32mp1_pll1_opp(struct stm32mp1_clk_priv *priv, int clksrc, ret =stm32mp1_get_max_opp_freq (priv, &output_freq);if (ret) { -debug ("PLL1 OPP configuration not found (%d).\n" , ret); +log_debug ("PLL1 OPP configuration not found (%d).\n" , ret);return ret; }
@@ -1440,8 +1437,8 @@ static int stm32mp1_osc_wait(int enable, fdt_addr_t rcc, u32 offset, TIMEOUT_1S);if (ret) -pr_err ("OSC %x @ %x timeout for enable=%d : 0x%x\n" , - mask_rdy, address, enable,readl (address)); +log_err ("OSC %x @ %x timeout for enable=%d : 0x%x\n" , + mask_rdy, address, enable,readl (address));return ret; }
@@ -1529,8 +1526,8 @@ static int stm32mp1_set_hsidiv(fdt_addr_t rcc, u8 hsidiv) val &RCC_OCRDYR_HSIDIVRDY , TIMEOUT_200MS);if (ret) -pr_err ("HSIDIV failed @ 0x%x: 0x%x\n" , - address,readl (address)); +log_err ("HSIDIV failed @ 0x%x: 0x%x\n" , + address,readl (address));return ret; }
@@ -1546,7 +1543,7 @@ static int stm32mp1_hsidiv(fdt_addr_t rcc, ulong hsifreq)break ;if (hsidiv ==4 ) { -pr_err ("clk-hsi frequency invalid" ); +log_err ("clk-hsi frequency invalid" );return -1 ; }
@@ -1577,8 +1574,8 @@ static int pll_output(struct stm32mp1_clk_priv *priv, int pll_id, int output) TIMEOUT_200MS);if (ret) { -pr_err ("PLL%d start failed @ 0x%x: 0x%x\n" , - pll_id, pllxcr,readl (pllxcr)); +log_err ("PLL%d start failed @ 0x%x: 0x%x\n" , + pll_id, pllxcr,readl (pllxcr));return ret; }
@@ -1640,7 +1637,7 @@ static int pll_config(struct stm32mp1_clk_priv *priv, int pll_id,if (refclk < (stm32mp1_pll[type].refclk_min *1000000 ) || refclk > (stm32mp1_pll[type].refclk_max *1000000 )) { -debug ("invalid refclk = %x\n" , (u32 )refclk); +log_err ("invalid refclk = %x\n" , (u32 )refclk);return -EINVAL ; }if (type ==PLL_800 && refclk >=8000000 )
@@ -1736,7 +1733,7 @@ static __maybe_unused int pll_set_rate(struct udevice *dev, divn = (value >>13 ) -1 ;if (divn <DIVN_MIN || divn > stm32mp1_pll[type].divn_max) { -pr_err ("divn invalid = %d" , divn); +dev_err (dev,"divn invalid = %d" , divn);return -EINVAL ; } fracv = value - ((divn +1 ) <<13 );
@@ -1761,8 +1758,8 @@ static int set_clksrc(struct stm32mp1_clk_priv *priv, unsigned int clksrc) ret =readl_poll_timeout (address, val, val &RCC_SELR_SRCRDY ,TIMEOUT_200MS );if (ret) -pr_err ("CLKSRC %x start failed @ 0x%x: 0x%x\n" , - clksrc, address,readl (address)); +log_err ("CLKSRC %x start failed @ 0x%x: 0x%x\n" , + clksrc, address,readl (address));return ret; }
@@ -1781,7 +1778,7 @@ static void stgen_config(struct stm32mp1_clk_priv *priv)if (cntfid0 != rate) {u64 counter; -pr_debug ("System Generic Counter (STGEN) update\n" ); +log_debug ("System Generic Counter (STGEN) update\n" );clrbits_le32 (stgenc +STGENC_CNTCR ,STGENC_CNTCR_EN ); counter = (u64 )readl (stgenc +STGENC_CNTCVL ); counter |= ((u64)(readl (stgenc +STGENC_CNTCVU ))) <<32 ;
@@ -1807,8 +1804,8 @@ static int set_clkdiv(unsigned int clkdiv, u32 address) ret =readl_poll_timeout (address, val, val &RCC_DIVR_DIVRDY ,TIMEOUT_200MS );if (ret) -pr_err ("CLKDIV %x start failed @ 0x%x: 0x%x\n" , - clkdiv, address,readl (address)); +log_err ("CLKDIV %x start failed @ 0x%x: 0x%x\n" , + clkdiv, address,readl (address));return ret; }
@@ -1891,13 +1888,13 @@ static int stm32mp1_clktree(struct udevice *dev)/* check mandatory field */ ret =dev_read_u32_array (dev,"st,clksrc" , clksrc,CLKSRC_NB );if (ret <0 ) { -debug ("field st,clksrc invalid: error %d\n" , ret); +dev_dbg (dev,"field st,clksrc invalid: error %d\n" , ret);return -FDT_ERR_NOTFOUND ; } ret =dev_read_u32_array (dev,"st,clkdiv" , clkdiv,CLKDIV_NB );if (ret <0 ) { -debug ("field st,clkdiv invalid: error %d\n" , ret); +dev_dbg (dev,"field st,clkdiv invalid: error %d\n" , ret);return -FDT_ERR_NOTFOUND ; }
@@ -1911,11 +1908,11 @@ static int stm32mp1_clktree(struct udevice *dev) pllcfg_valid[i] =ofnode_valid (node); pllcsg_set[i] = false;if (pllcfg_valid[i]) { -debug ("DT for PLL %d @ %s\n" , i, name); +dev_dbg (dev,"DT for PLL %d @ %s\n" , i, name); ret =ofnode_read_u32_array (node,"cfg" , pllcfg[i],PLLCFG_NB );if (ret <0 ) { -debug ("field cfg invalid: error %d\n" , ret); +dev_dbg (dev,"field cfg invalid: error %d\n" , ret);return -FDT_ERR_NOTFOUND ; } pllfracv[i] =ofnode_read_u32_default (node,"frac" ,0 );
@@ -1925,30 +1922,30 @@ static int stm32mp1_clktree(struct udevice *dev)if (!ret) { pllcsg_set[i] = true; }else if (ret != -FDT_ERR_NOTFOUND ) { -debug ("invalid csg node for pll@%d res=%d\n" , - i, ret); +dev_dbg (dev,"invalid csg node for pll@%d res=%d\n" , + i, ret);return ret; } }else if (i == _PLL1) {/* use OPP for PLL1 for A7 CPU */ -debug ("DT for PLL %d with OPP\n" , i); +dev_dbg (dev,"DT for PLL %d with OPP\n" , i); ret =stm32mp1_pll1_opp (priv, clksrc[CLKSRC_PLL12 ], pllcfg[i], &pllfracv[i]);if (ret) { -debug ("PLL %d with OPP error = %d\n" , i, ret); +dev_dbg (dev,"PLL %d with OPP error = %d\n" , i, ret);return ret; } pllcfg_valid[i] = true; } } -debug ("configuration MCO\n" ); +dev_dbg (dev,"configuration MCO\n" );stm32mp1_mco_csg (priv, clksrc[CLKSRC_MCO1 ], clkdiv[CLKDIV_MCO1 ]);stm32mp1_mco_csg (priv, clksrc[CLKSRC_MCO2 ], clkdiv[CLKDIV_MCO2 ]); -debug ("switch ON osillator\n" ); +dev_dbg (dev,"switch ON osillator\n" );/* * switch ON oscillator found in device-tree, * HSI already ON after bootrom
@@ -1986,24 +1983,24 @@ static int stm32mp1_clktree(struct udevice *dev)stm32mp1_csi_set (rcc,1 );/* come back to HSI */ -debug ("come back to HSI\n" ); +dev_dbg (dev,"come back to HSI\n" );set_clksrc (priv,CLK_MPU_HSI );set_clksrc (priv,CLK_AXI_HSI );set_clksrc (priv,CLK_MCU_HSI ); -debug ("pll stop\n" ); +dev_dbg (dev,"pll stop\n" );for (i =0 ; i < _PLL_NB; i++)pll_stop (priv, i);/* configure HSIDIV */ -debug ("configure HSIDIV\n" ); +dev_dbg (dev,"configure HSIDIV\n" );if (priv->osc[_HSI]) {stm32mp1_hsidiv (rcc, priv->osc[_HSI]);stgen_config (priv); }/* select DIV */ -debug ("select DIV\n" ); +dev_dbg (dev,"select DIV\n" );/* no ready bit when MPUSRC != CLK_MPU_PLL1P_DIV, MPUDIV is disabled */ writel (clkdiv[CLKDIV_MPU ] &RCC_DIVR_DIV_MASK , rcc +RCC_MPCKDIVR );set_clkdiv (clkdiv[CLKDIV_AXI ], rcc +RCC_AXIDIVR );
@@ -2018,17 +2015,17 @@ static int stm32mp1_clktree(struct udevice *dev)writel (clkdiv[CLKDIV_RTC ] &RCC_DIVR_DIV_MASK , rcc +RCC_RTCDIVR );/* configure PLLs source */ -debug ("configure PLLs source\n" ); +dev_dbg (dev,"configure PLLs source\n" );set_clksrc (priv, clksrc[CLKSRC_PLL12 ]);set_clksrc (priv, clksrc[CLKSRC_PLL3 ]);set_clksrc (priv, clksrc[CLKSRC_PLL4 ]);/* configure and start PLLs */ -debug ("configure PLLs\n" ); +dev_dbg (dev,"configure PLLs\n" );for (i =0 ; i < _PLL_NB; i++) {if (!pllcfg_valid[i])continue ; -debug ("configure PLL %d\n" , i); +dev_dbg (dev,"configure PLL %d\n" , i);pll_config (priv, i, pllcfg[i], pllfracv[i]);if (pllcsg_set[i])pll_csg (priv, i, pllcsg[i]);
@@ -2039,7 +2036,7 @@ static int stm32mp1_clktree(struct udevice *dev)for (i =0 ; i < _PLL_NB; i++) {if (!pllcfg_valid[i])continue ; -debug ("output PLL %d\n" , i); +dev_dbg (dev,"output PLL %d\n" , i);pll_output (priv, i, pllcfg[i][PLLCFG_O ]); }
@@ -2048,14 +2045,14 @@ static int stm32mp1_clktree(struct udevice *dev)stm32mp1_lse_wait (rcc);/* configure with expected clock source */ -debug ("CLKSRC\n" ); +dev_dbg (dev,"CLKSRC\n" );set_clksrc (priv, clksrc[CLKSRC_MPU ]);set_clksrc (priv, clksrc[CLKSRC_AXI ]);set_clksrc (priv, clksrc[CLKSRC_MCU ]);set_rtcsrc (priv, clksrc[CLKSRC_RTC ], lse_css);/* configure PKCK */ -debug ("PKCK\n" ); +dev_dbg (dev,"PKCK\n" ); pkcs_cell =dev_read_prop (dev,"st,pkcs" , &len);if (pkcs_cell) {bool ckper_disabled = false;
@@ -2081,7 +2078,7 @@ static int stm32mp1_clktree(struct udevice *dev)/* STGEN clock source can change with CLK_STGEN_XXX */ stgen_config (priv); -debug ("oscillator off\n" ); +dev_dbg (dev,"oscillator off\n" );/* switch OFF HSI if not found in device-tree */ if (!priv->osc[_HSI])stm32mp1_hsi_set (rcc,0 );
@@ -2147,14 +2144,12 @@ static ulong stm32mp1_clk_set_rate(struct clk *clk, unsigned long clk_rate)case DSI_PX :break ;default : -pr_err ("not supported" ); +dev_err (clk->dev,"Set of clk %ld not supported" , clk->id);return -EINVAL ; } p =stm32mp1_clk_get_parent (priv, clk->id); -#ifdef DEBUG -debug ("%s: parent = %d:%s\n" , __func__, p, stm32mp1_clk_parent_name[p]); -#endif +dev_vdbg (clk->dev,"parent = %d:%s\n" , p, stm32mp1_clk_parent_name[p]);if (p <0 )return -EINVAL ;
@@ -2192,7 +2187,7 @@ static void stm32mp1_osc_clk_init(const char *name, clk.id =0 ;if (!uclass_get_device_by_name (UCLASS_CLK , name, &dev)) {if (clk_request (dev, &clk)) -pr_err ("%s request" , name); +log_err ("%s request" , name);else priv->osc[index] =clk_get_rate (&clk); }
@@ -2214,7 +2209,7 @@ static void stm32mp1_osc_init(struct udevice *dev)for (i =0 ; i <NB_OSC ; i++) {stm32mp1_osc_clk_init (name[i], priv, i); -debug ("%d: %s => %x\n" , i, name[i], (u32 )priv->osc[i]); +dev_dbg (dev,"%d: %s => %x\n" , i, name[i], (u32 )priv->osc[i]); } }
@@ -2288,11 +2283,11 @@ static int stm32mp1_clk_probe(struct udevice *dev)if (!(gd->flags &GD_FLG_RELOC )) result =stm32mp1_clktree (dev);if (result) -printf ("clock tree initialization failed (%d)\n" , result); +dev_err (dev,"clock tree initialization failed (%d)\n" , result);#endif #ifndef CONFIG_SPL_BUILD -#if defined(DEBUG ) +#if defined(VERBOSE_DEBUG )/* display debug information for probe after relocation */ if (gd->flags &GD_FLG_RELOC )stm32mp1_clk_dump (priv);
@@ -2306,14 +2301,14 @@ static int stm32mp1_clk_probe(struct udevice *dev)if (gd->flags &GD_FLG_RELOC ) {char buf[32 ]; -printf ("Clocks:\n" ); -printf ("- MPU : %s MHz\n" ,strmhz (buf, gd->cpu_clk)); -printf ("- MCU : %s MHz\n" , -strmhz (buf,stm32mp1_clk_get (priv, _CK_MCU))); -printf ("- AXI : %s MHz\n" ,strmhz (buf, gd->bus_clk)); -printf ("- PER : %s MHz\n" , -strmhz (buf,stm32mp1_clk_get (priv, _CK_PER))); -printf ("- DDR : %s MHz\n" ,strmhz (buf, gd->mem_clk)); +log_info ("Clocks:\n" ); +log_info ("- MPU : %s MHz\n" ,strmhz (buf, gd->cpu_clk)); +log_info ("- MCU : %s MHz\n" , +strmhz (buf,stm32mp1_clk_get (priv, _CK_MCU))); +log_info ("- AXI : %s MHz\n" ,strmhz (buf, gd->bus_clk)); +log_info ("- PER : %s MHz\n" , +strmhz (buf,stm32mp1_clk_get (priv, _CK_PER))); +log_info ("- DDR : %s MHz\n" ,strmhz (buf, gd->mem_clk)); }#endif /* CONFIG_DISPLAY_CPUINFO */ #endif
Signature · 1 line
2.17.1
PATCH 17/33 clk: stm32mp1: migrate trace to dev and log macro
Hi Patrick
Quoted 457 lines · Patrick Delaunay
Change debug and
pr_macro to dev macro and defineLOG_CATEGORY.Remove the "%s:"
__func__header as it is managed by dev macro (dev->nameis displayed) or log macro (CONFIG_LOGF_FUNC).Signed-off-by Patrick Delaunay <[email protected]>---
drivers/clk/clk_stm32mp1.c | 147 ++++++++++++++++++------------------- 1 file changed, 71 insertions(+), 76 deletions(-)drivers/clk/clk_stm32mp1.c +64
-76@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_CLK +#include <common.h> #include <clk-uclass.h> #include <div64.h> @@ -14,12 +16,13 @@#include <syscon.h> #include <time.h> #include <vsprintf.h> -#include <linux/bitops.h> -#include <linux/io.h> -#include <linux/iopoll.h> #include <asm/arch/sys_proto.h> +#include <dm/device_compat.h> #include <dt-bindings/clock/stm32mp1-clks.h> #include <dt-bindings/clock/stm32mp1-clksrc.h> +#include <linux/bitops.h> +#include <linux/io.h> +#include <linux/iopoll.h> DECLARE_GLOBAL_DATA_PTR ;@@ -781,7 +784,7 @@ static const struct stm32mp1_clk_data stm32mp1_data = {static ulong stm32mp1_clk_get_fixed (struct stm32mp1_clk_priv *priv,int idx) {if (idx >=NB_OSC ) { -debug ("%s: clk id %d not found\n" , __func__, idx); +log_debug ("clk id %d not found\n" , idx);return 0 ; }@@ -799,7 +802,7 @@ static int stm32mp1_clk_get_id(struct stm32mp1_clk_priv *priv, unsigned long id) }if (i == nb_clks) { -printf ("%s: clk id %d not found\n" , __func__, (u32 )id); +log_err ("clk id %d not found\n" , (u32 )id);return -EINVAL ; }@@ -812,8 +815,7 @@ static int stm32mp1_clk_get_sel(struct stm32mp1_clk_priv *priv,const struct stm32mp1_clk_gate *gate = priv->data->gate;if (gate[i].sel > _PARENT_SEL_NB) { -printf ("%s: parents for clk id %d not found\n" , - __func__, i); +log_err ("parents for clk id %d not found\n" , i);return -EINVAL ; }@@ -858,17 +860,14 @@ static int stm32mp1_clk_get_parent(struct stm32mp1_clk_priv *priv, p = (readl (priv->base + sel[s].offset) >> sel[s].src) & sel[s].msk;if (p < sel[s].nb_parent) { -#ifdef DEBUG -debug ("%s: %s clock is the parent %s of clk id %d\n" , __func__, - stm32mp1_clk_parent_name[sel[s].parent[p]], - stm32mp1_clk_parent_sel_name[s], - (u32 )id); -#endif +log_content ("%s clock is the parent %s of clk id %d\n" , + stm32mp1_clk_parent_name[sel[s].parent[p]], + stm32mp1_clk_parent_sel_name[s], + (u32 )id);return sel[s].parent[p]; } -pr_err ("%s: no parents defined for clk id %d\n" , - __func__, (u32 )id); +log_err ("no parents defined for clk id %d\n" , (u32 )id);return -EINVAL ; }@@ -1124,7 +1123,7 @@ static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p)if (!uclass_get_device_by_name (UCLASS_CLK ,"ck_dsi_phy" , &dev)) {if (clk_request (dev, &clk)) { -pr_err ("ck_dsi_phy request" ); +log_err ("ck_dsi_phy request" ); }else { clk.id =0 ; clock =clk_get_rate (&clk);@@ -1136,8 +1135,7 @@ static ulong stm32mp1_clk_get(struct stm32mp1_clk_priv *priv, int p)break ; } -debug ("%s(%d) clock = %lx : %ld kHz\n" , - __func__, p, clock, clock /1000 ); +log_debug ("id=%d clock = %lx : %ld kHz\n" , p, clock, clock /1000 );return clock; }@@ -1156,7 +1154,7 @@ static int stm32mp1_clk_enable(struct clk *clk)else setbits_le32 (priv->base + gate[i].offset,BIT (gate[i].bit)); -debug ("%s: id clock %d has been enabled\n" , __func__, (u32 )clk->id); +dev_dbg (clk->dev,"%s: id clock %d has been enabled\n" , __func__, (u32 )clk->id);return 0 ; }@@ -1177,7 +1175,7 @@ static int stm32mp1_clk_disable(struct clk *clk)else clrbits_le32 (priv->base + gate[i].offset,BIT (gate[i].bit)); -debug ("%s: id clock %d has been disabled\n" , __func__, (u32 )clk->id); +dev_dbg (clk->dev,"%s: id clock %d has been disabled\n" , __func__, (u32 )clk->id);return 0 ; }@@ -1193,10 +1191,9 @@ static ulong stm32mp1_clk_get_rate(struct clk *clk) rate =stm32mp1_clk_get (priv, p); -#ifdef DEBUG -debug ("%s: computed rate for id clock %d is %d (parent is %s)\n" , - __func__, (u32 )clk->id, (u32 )rate, stm32mp1_clk_parent_name[p]); -#endif +dev_vdbg (clk->dev,"computed rate for id clock %d is %d (parent is %s)\n" , + (u32 )clk->id, (u32 )rate, stm32mp1_clk_parent_name[p]); +return rate; }@@ -1335,7 +1332,7 @@ static int stm32mp1_pll1_opp(struct stm32mp1_clk_priv *priv, int clksrc, ret =stm32mp1_get_max_opp_freq (priv, &output_freq);if (ret) { -debug ("PLL1 OPP configuration not found (%d).\n" , ret); +log_debug ("PLL1 OPP configuration not found (%d).\n" , ret);return ret; }@@ -1440,8 +1437,8 @@ static int stm32mp1_osc_wait(int enable, fdt_addr_t rcc, u32 offset, TIMEOUT_1S);if (ret) -pr_err ("OSC %x @ %x timeout for enable=%d : 0x%x\n" , - mask_rdy, address, enable,readl (address)); +log_err ("OSC %x @ %x timeout for enable=%d : 0x%x\n" , + mask_rdy, address, enable,readl (address));return ret; }@@ -1529,8 +1526,8 @@ static int stm32mp1_set_hsidiv(fdt_addr_t rcc, u8 hsidiv) val &RCC_OCRDYR_HSIDIVRDY , TIMEOUT_200MS);if (ret) -pr_err ("HSIDIV failed @ 0x%x: 0x%x\n" , - address,readl (address)); +log_err ("HSIDIV failed @ 0x%x: 0x%x\n" , + address,readl (address));return ret; }@@ -1546,7 +1543,7 @@ static int stm32mp1_hsidiv(fdt_addr_t rcc, ulong hsifreq)break ;if (hsidiv ==4 ) { -pr_err ("clk-hsi frequency invalid" ); +log_err ("clk-hsi frequency invalid" );return -1 ; }@@ -1577,8 +1574,8 @@ static int pll_output(struct stm32mp1_clk_priv *priv, int pll_id, int output) TIMEOUT_200MS);if (ret) { -pr_err ("PLL%d start failed @ 0x%x: 0x%x\n" , - pll_id, pllxcr,readl (pllxcr)); +log_err ("PLL%d start failed @ 0x%x: 0x%x\n" , + pll_id, pllxcr,readl (pllxcr));return ret; }@@ -1640,7 +1637,7 @@ static int pll_config(struct stm32mp1_clk_priv *priv, int pll_id,if (refclk < (stm32mp1_pll[type].refclk_min *1000000 ) || refclk > (stm32mp1_pll[type].refclk_max *1000000 )) { -debug ("invalid refclk = %x\n" , (u32 )refclk); +log_err ("invalid refclk = %x\n" , (u32 )refclk);return -EINVAL ; }if (type ==PLL_800 && refclk >=8000000 )@@ -1736,7 +1733,7 @@ static __maybe_unused int pll_set_rate(struct udevice *dev, divn = (value >>13 ) -1 ;if (divn <DIVN_MIN || divn > stm32mp1_pll[type].divn_max) { -pr_err ("divn invalid = %d" , divn); +dev_err (dev,"divn invalid = %d" , divn);return -EINVAL ; } fracv = value - ((divn +1 ) <<13 );@@ -1761,8 +1758,8 @@ static int set_clksrc(struct stm32mp1_clk_priv *priv, unsigned int clksrc) ret =readl_poll_timeout (address, val, val &RCC_SELR_SRCRDY ,TIMEOUT_200MS );if (ret) -pr_err ("CLKSRC %x start failed @ 0x%x: 0x%x\n" , - clksrc, address,readl (address)); +log_err ("CLKSRC %x start failed @ 0x%x: 0x%x\n" , + clksrc, address,readl (address));return ret; }@@ -1781,7 +1778,7 @@ static void stgen_config(struct stm32mp1_clk_priv *priv)if (cntfid0 != rate) {u64 counter; -pr_debug ("System Generic Counter (STGEN) update\n" ); +log_debug ("System Generic Counter (STGEN) update\n" );clrbits_le32 (stgenc +STGENC_CNTCR ,STGENC_CNTCR_EN ); counter = (u64 )readl (stgenc +STGENC_CNTCVL ); counter |= ((u64)(readl (stgenc +STGENC_CNTCVU ))) <<32 ;@@ -1807,8 +1804,8 @@ static int set_clkdiv(unsigned int clkdiv, u32 address) ret =readl_poll_timeout (address, val, val &RCC_DIVR_DIVRDY ,TIMEOUT_200MS );if (ret) -pr_err ("CLKDIV %x start failed @ 0x%x: 0x%x\n" , - clkdiv, address,readl (address)); +log_err ("CLKDIV %x start failed @ 0x%x: 0x%x\n" , + clkdiv, address,readl (address));return ret; }@@ -1891,13 +1888,13 @@ static int stm32mp1_clktree(struct udevice *dev)/* check mandatory field */ ret =dev_read_u32_array (dev,"st,clksrc" , clksrc,CLKSRC_NB );if (ret <0 ) { -debug ("field st,clksrc invalid: error %d\n" , ret); +dev_dbg (dev,"field st,clksrc invalid: error %d\n" , ret);return -FDT_ERR_NOTFOUND ; } ret =dev_read_u32_array (dev,"st,clkdiv" , clkdiv,CLKDIV_NB );if (ret <0 ) { -debug ("field st,clkdiv invalid: error %d\n" , ret); +dev_dbg (dev,"field st,clkdiv invalid: error %d\n" , ret);return -FDT_ERR_NOTFOUND ; }@@ -1911,11 +1908,11 @@ static int stm32mp1_clktree(struct udevice *dev) pllcfg_valid[i] =ofnode_valid (node); pllcsg_set[i] = false;if (pllcfg_valid[i]) { -debug ("DT for PLL %d @ %s\n" , i, name); +dev_dbg (dev,"DT for PLL %d @ %s\n" , i, name); ret =ofnode_read_u32_array (node,"cfg" , pllcfg[i],PLLCFG_NB );if (ret <0 ) { -debug ("field cfg invalid: error %d\n" , ret); +dev_dbg (dev,"field cfg invalid: error %d\n" , ret);return -FDT_ERR_NOTFOUND ; } pllfracv[i] =ofnode_read_u32_default (node,"frac" ,0 );@@ -1925,30 +1922,30 @@ static int stm32mp1_clktree(struct udevice *dev)if (!ret) { pllcsg_set[i] = true; }else if (ret != -FDT_ERR_NOTFOUND ) { -debug ("invalid csg node for pll@%d res=%d\n" , - i, ret); +dev_dbg (dev,"invalid csg node for pll@%d res=%d\n" , + i, ret);return ret; } }else if (i == _PLL1) {/* use OPP for PLL1 for A7 CPU */ -debug ("DT for PLL %d with OPP\n" , i); +dev_dbg (dev,"DT for PLL %d with OPP\n" , i); ret =stm32mp1_pll1_opp (priv, clksrc[CLKSRC_PLL12 ], pllcfg[i], &pllfracv[i]);if (ret) { -debug ("PLL %d with OPP error = %d\n" , i, ret); +dev_dbg (dev,"PLL %d with OPP error = %d\n" , i, ret);return ret; } pllcfg_valid[i] = true; } } -debug ("configuration MCO\n" ); +dev_dbg (dev,"configuration MCO\n" );stm32mp1_mco_csg (priv, clksrc[CLKSRC_MCO1 ], clkdiv[CLKDIV_MCO1 ]);stm32mp1_mco_csg (priv, clksrc[CLKSRC_MCO2 ], clkdiv[CLKDIV_MCO2 ]); -debug ("switch ON osillator\n" ); +dev_dbg (dev,"switch ON osillator\n" );/* * switch ON oscillator found in device-tree, * HSI already ON after bootrom @@ -1986,24 +1983,24 @@ static int stm32mp1_clktree(struct udevice *dev)stm32mp1_csi_set (rcc,1 );/* come back to HSI */ -debug ("come back to HSI\n" ); +dev_dbg (dev,"come back to HSI\n" );set_clksrc (priv,CLK_MPU_HSI );set_clksrc (priv,CLK_AXI_HSI );set_clksrc (priv,CLK_MCU_HSI ); -debug ("pll stop\n" ); +dev_dbg (dev,"pll stop\n" );for (i =0 ; i < _PLL_NB; i++)pll_stop (priv, i);/* configure HSIDIV */ -debug ("configure HSIDIV\n" ); +dev_dbg (dev,"configure HSIDIV\n" );if (priv->osc[_HSI]) {stm32mp1_hsidiv (rcc, priv->osc[_HSI]);stgen_config (priv); }/* select DIV */ -debug ("select DIV\n" ); +dev_dbg (dev,"select DIV\n" );/* no ready bit when MPUSRC != CLK_MPU_PLL1P_DIV, MPUDIV is disabled */ writel (clkdiv[CLKDIV_MPU ] &RCC_DIVR_DIV_MASK , rcc +RCC_MPCKDIVR );set_clkdiv (clkdiv[CLKDIV_AXI ], rcc +RCC_AXIDIVR );@@ -2018,17 +2015,17 @@ static int stm32mp1_clktree(struct udevice *dev)writel (clkdiv[CLKDIV_RTC ] &RCC_DIVR_DIV_MASK , rcc +RCC_RTCDIVR );/* configure PLLs source */ -debug ("configure PLLs source\n" ); +dev_dbg (dev,"configure PLLs source\n" );set_clksrc (priv, clksrc[CLKSRC_PLL12 ]);set_clksrc (priv, clksrc[CLKSRC_PLL3 ]);set_clksrc (priv, clksrc[CLKSRC_PLL4 ]);/* configure and start PLLs */ -debug ("configure PLLs\n" ); +dev_dbg (dev,"configure PLLs\n" );for (i =0 ; i < _PLL_NB; i++) {if (!pllcfg_valid[i])continue ; -debug ("configure PLL %d\n" , i); +dev_dbg (dev,"configure PLL %d\n" , i);pll_config (priv, i, pllcfg[i], pllfracv[i]);if (pllcsg_set[i])pll_csg (priv, i, pllcsg[i]);@@ -2039,7 +2036,7 @@ static int stm32mp1_clktree(struct udevice *dev)for (i =0 ; i < _PLL_NB; i++) {if (!pllcfg_valid[i])continue ; -debug ("output PLL %d\n" , i); +dev_dbg (dev,"output PLL %d\n" , i);pll_output (priv, i, pllcfg[i][PLLCFG_O ]); }@@ -2048,14 +2045,14 @@ static int stm32mp1_clktree(struct udevice *dev)stm32mp1_lse_wait (rcc);/* configure with expected clock source */ -debug ("CLKSRC\n" ); +dev_dbg (dev,"CLKSRC\n" );set_clksrc (priv, clksrc[CLKSRC_MPU ]);set_clksrc (priv, clksrc[CLKSRC_AXI ]);set_clksrc (priv, clksrc[CLKSRC_MCU ]);set_rtcsrc (priv, clksrc[CLKSRC_RTC ], lse_css);/* configure PKCK */ -debug ("PKCK\n" ); +dev_dbg (dev,"PKCK\n" ); pkcs_cell =dev_read_prop (dev,"st,pkcs" , &len);if (pkcs_cell) {bool ckper_disabled = false;@@ -2081,7 +2078,7 @@ static int stm32mp1_clktree(struct udevice *dev)/* STGEN clock source can change with CLK_STGEN_XXX */ stgen_config (priv); -debug ("oscillator off\n" ); +dev_dbg (dev,"oscillator off\n" );/* switch OFF HSI if not found in device-tree */ if (!priv->osc[_HSI])stm32mp1_hsi_set (rcc,0 );@@ -2147,14 +2144,12 @@ static ulong stm32mp1_clk_set_rate(struct clk *clk, unsigned long clk_rate)case DSI_PX :break ;default : -pr_err ("not supported" ); +dev_err (clk->dev,"Set of clk %ld not supported" , clk->id);return -EINVAL ; } p =stm32mp1_clk_get_parent (priv, clk->id); -#ifdef DEBUG -debug ("%s: parent = %d:%s\n" , __func__, p, stm32mp1_clk_parent_name[p]); -#endif +dev_vdbg (clk->dev,"parent = %d:%s\n" , p, stm32mp1_clk_parent_name[p]);if (p <0 )return -EINVAL ;@@ -2192,7 +2187,7 @@ static void stm32mp1_osc_clk_init(const char *name, clk.id =0 ;if (!uclass_get_device_by_name (UCLASS_CLK , name, &dev)) {if (clk_request (dev, &clk)) -pr_err ("%s request" , name); +log_err ("%s request" , name);else priv->osc[index] =clk_get_rate (&clk); }@@ -2214,7 +2209,7 @@ static void stm32mp1_osc_init(struct udevice *dev)for (i =0 ; i <NB_OSC ; i++) {stm32mp1_osc_clk_init (name[i], priv, i); -debug ("%d: %s => %x\n" , i, name[i], (u32 )priv->osc[i]); +dev_dbg (dev,"%d: %s => %x\n" , i, name[i], (u32 )priv->osc[i]); } }@@ -2288,11 +2283,11 @@ static int stm32mp1_clk_probe(struct udevice *dev)if (!(gd->flags &GD_FLG_RELOC )) result =stm32mp1_clktree (dev);if (result) -printf ("clock tree initialization failed (%d)\n" , result); +dev_err (dev,"clock tree initialization failed (%d)\n" , result);#endif #ifndef CONFIG_SPL_BUILD -#if defined(DEBUG ) +#if defined(VERBOSE_DEBUG )/* display debug information for probe after relocation */ if (gd->flags &GD_FLG_RELOC )stm32mp1_clk_dump (priv);@@ -2306,14 +2301,14 @@ static int stm32mp1_clk_probe(struct udevice *dev)if (gd->flags &GD_FLG_RELOC ) {char buf[32 ]; -printf ("Clocks:\n" ); -printf ("- MPU : %s MHz\n" ,strmhz (buf, gd->cpu_clk)); -printf ("- MCU : %s MHz\n" , -strmhz (buf,stm32mp1_clk_get (priv, _CK_MCU))); -printf ("- AXI : %s MHz\n" ,strmhz (buf, gd->bus_clk)); -printf ("- PER : %s MHz\n" , -strmhz (buf,stm32mp1_clk_get (priv, _CK_PER))); -printf ("- DDR : %s MHz\n" ,strmhz (buf, gd->mem_clk)); +log_info ("Clocks:\n" );
drivers/clk/clk_stm32mp1.c static int stm32mp1_clk_probe(struct udevice *dev) · line 2314
Quoted 10 lines
drivers/clk/clk_stm32mp1.c +7
-0+log_info ("- MPU : %s MHz\n" ,strmhz (buf, gd->cpu_clk)); +log_info ("- MCU : %s MHz\n" , +strmhz (buf,stm32mp1_clk_get (priv, _CK_MCU))); +log_info ("- AXI : %s MHz\n" ,strmhz (buf, gd->bus_clk)); +log_info ("- PER : %s MHz\n" , +strmhz (buf,stm32mp1_clk_get (priv, _CK_PER))); +log_info ("- DDR : %s MHz\n" ,strmhz (buf, gd->mem_clk)); }#endif /* CONFIG_DISPLAY_CPUINFO */ #endif
Thanks
PATCH 18/33 clk: clk_stm32f: migrate trace to dev and log macro
In reply to Patrick DelaunayChange debug and pr_ macro to dev macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
---
drivers/clk/clk_stm32f.c | 39 ++++++++++++++++++++------------------- 1 file changed, 20 insertions(+), 19 deletions(-)
drivers/clk/clk_stm32f.c +20 -19
@@ -4,18 +4,19 @@* Author(s): Vikas Manocha, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_CLK +#include <common.h> #include <clk-uclass.h> #include <dm.h> #include <log.h> #include <stm32_rcc.h> -#include <linux/bitops.h> -#include <asm/io.h> #include <asm/arch/stm32.h> #include <asm/arch/stm32_pwr.h> - +#include <dm/device_compat.h> #include <dt-bindings/mfd/stm32f7-rcc.h> +#include <linux/bitops.h> #define RCC_CR_HSION BIT(0)#define RCC_CR_HSEON BIT(16)
@@ -309,7 +310,7 @@ static unsigned long stm32_clk_get_pllsai_rate(struct stm32_clk *priv, >> RCC_PLLSAICFGR_PLLSAIR_SHIFT;break ;default : -pr_err ("incorrect PLLSAI output %d\n" , output); +log_err ("incorrect PLLSAI output %d\n" , output);return -EINVAL ; }
@@ -490,7 +491,7 @@ static ulong stm32_clk_get_rate(struct clk *clk)return (sysclk >>stm32_get_apb_shift (regs,APB2 ));default : -pr_err ("clock index %ld out of range\n" , clk->id); +dev_err (clk->dev,"clock index %ld out of range\n" , clk->id);return -EINVAL ; } }
@@ -509,8 +510,9 @@ static ulong stm32_set_rate(struct clk *clk, ulong rate)/* Only set_rate for LTDC clock is implemented */ if (clk->id !=STM32F7_APB2_CLOCK (LTDC )) { -pr_err ("set_rate not implemented for clock index %ld\n" , - clk->id); +dev_err (clk->dev, +"set_rate not implemented for clock index %ld\n" , + clk->id);return 0 ; }
@@ -604,8 +606,8 @@ static int stm32_clk_enable(struct clk *clk)u32 offset = clk->id /32 ;u32 bit_index = clk->id %32 ; -debug ("%s: clkid = %ld, offset from AHB1ENR is %d, bit_index = %d\n" , - __func__, clk->id, offset, bit_index); +dev_dbg (clk->dev,"clkid = %ld, offset from AHB1ENR is %d, bit_index = %d\n" , + clk->id, offset, bit_index);setbits_le32 (®s->ahb1enr + offset,BIT (bit_index));return 0 ;
@@ -618,7 +620,7 @@ static int stm32_clk_probe(struct udevice *dev)struct clk clk;int err; -debug ("%s\n" , __func__); +dev_dbg (dev,"%s\n" , __func__);struct stm32_clk *priv =dev_get_priv (dev);fdt_addr_t addr;
@@ -652,14 +654,14 @@ static int stm32_clk_probe(struct udevice *dev) &fixed_clock_dev);if (err) { -pr_err ("Can't find fixed clock (%d)" , err); +dev_err (dev,"Can't find fixed clock (%d)" , err);return err; } err =clk_request (fixed_clock_dev, &clk);if (err) { -pr_err ("Can't request %s clk (%d)" , fixed_clock_dev->name, - err); +dev_err (dev,"Can't request %s clk (%d)" , + fixed_clock_dev->name, err);return err; }
@@ -673,8 +675,8 @@ static int stm32_clk_probe(struct udevice *dev) priv->hse_rate =clk_get_rate (&clk);if (priv->hse_rate <1000000 ) { -pr_err ("%s: unexpected HSE clock rate = %ld \"n" , __func__, - priv->hse_rate); +dev_err (dev,"unexpected HSE clock rate = %ld \"n" , + priv->hse_rate);return -EINVAL ; }
@@ -684,8 +686,7 @@ static int stm32_clk_probe(struct udevice *dev) err =dev_read_phandle_with_args (dev,"st,syscfg" ,NULL ,0 ,0 , &args);if (err) { -debug ("%s: can't find syscon device (%d)\n" , __func__, - err); +dev_err (dev,"can't find syscon device (%d)\n" , err);return err; }
@@ -699,10 +700,10 @@ static int stm32_clk_probe(struct udevice *dev)static int stm32_clk_of_xlate (struct clk *clk,struct ofnode_phandle_args *args) { -debug ("%s(clk=%p)\n" , __func__, clk); +dev_dbg (clk->dev,"clk=%p\n" , clk);if (args->args_count !=2 ) { -debug ("Invaild args_count: %d\n" , args->args_count); +dev_dbg (clk->dev,"Invaild args_count: %d\n" , args->args_count);return -EINVAL ; }
Signature · 1 line
2.17.1
PATCH 18/33 clk: clk_stm32f: migrate trace to dev and log macro
Hi Patrick
Quoted 130 lines · Patrick Delaunay
Change debug and
pr_macro to dev macro and defineLOG_CATEGORY.Remove the "%s:"
__func__header as it is managed by dev macro (dev->nameis displayed) or log macro (CONFIG_LOGF_FUNC).Signed-off-by Patrick Delaunay <[email protected]>---
drivers/clk/clk_stm32f.c | 39 ++++++++++++++++++++------------------- 1 file changed, 20 insertions(+), 19 deletions(-)drivers/clk/clk_stm32f.c +18
-17@@ -4,18 +4,19 @@* Author(s): Vikas Manocha, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_CLK +#include <common.h> #include <clk-uclass.h> #include <dm.h> #include <log.h> #include <stm32_rcc.h> -#include <linux/bitops.h> -#include <asm/io.h> #include <asm/arch/stm32.h> #include <asm/arch/stm32_pwr.h> - +#include <dm/device_compat.h> #include <dt-bindings/mfd/stm32f7-rcc.h> +#include <linux/bitops.h> #define RCC_CR_HSION BIT(0)#define RCC_CR_HSEON BIT(16)@@ -309,7 +310,7 @@ static unsigned long stm32_clk_get_pllsai_rate(struct stm32_clk *priv, >> RCC_PLLSAICFGR_PLLSAIR_SHIFT;break ;default : -pr_err ("incorrect PLLSAI output %d\n" , output); +log_err ("incorrect PLLSAI output %d\n" , output);return -EINVAL ; }@@ -490,7 +491,7 @@ static ulong stm32_clk_get_rate(struct clk *clk)return (sysclk >>stm32_get_apb_shift (regs,APB2 ));default : -pr_err ("clock index %ld out of range\n" , clk->id); +dev_err (clk->dev,"clock index %ld out of range\n" , clk->id);return -EINVAL ; } }@@ -509,8 +510,9 @@ static ulong stm32_set_rate(struct clk *clk, ulong rate)/* Only set_rate for LTDC clock is implemented */ if (clk->id !=STM32F7_APB2_CLOCK (LTDC )) { -pr_err ("set_rate not implemented for clock index %ld\n" , - clk->id); +dev_err (clk->dev, +"set_rate not implemented for clock index %ld\n" , + clk->id);return 0 ; }@@ -604,8 +606,8 @@ static int stm32_clk_enable(struct clk *clk)u32 offset = clk->id /32 ;u32 bit_index = clk->id %32 ; -debug ("%s: clkid = %ld, offset from AHB1ENR is %d, bit_index = %d\n" , - __func__, clk->id, offset, bit_index); +dev_dbg (clk->dev,"clkid = %ld, offset from AHB1ENR is %d, bit_index = %d\n" , + clk->id, offset, bit_index);setbits_le32 (®s->ahb1enr + offset,BIT (bit_index));return 0 ;@@ -618,7 +620,7 @@ static int stm32_clk_probe(struct udevice *dev)struct clk clk;int err; -debug ("%s\n" , __func__); +dev_dbg (dev,"%s\n" , __func__);struct stm32_clk *priv =dev_get_priv (dev);fdt_addr_t addr;@@ -652,14 +654,14 @@ static int stm32_clk_probe(struct udevice *dev) &fixed_clock_dev);if (err) { -pr_err ("Can't find fixed clock (%d)" , err); +dev_err (dev,"Can't find fixed clock (%d)" , err);return err; } err =clk_request (fixed_clock_dev, &clk);if (err) { -pr_err ("Can't request %s clk (%d)" , fixed_clock_dev->name, - err); +dev_err (dev,"Can't request %s clk (%d)" , + fixed_clock_dev->name, err);return err; }@@ -673,8 +675,8 @@ static int stm32_clk_probe(struct udevice *dev) priv->hse_rate =clk_get_rate (&clk);if (priv->hse_rate <1000000 ) { -pr_err ("%s: unexpected HSE clock rate = %ld \"n" , __func__, - priv->hse_rate); +dev_err (dev,"unexpected HSE clock rate = %ld \"n" , + priv->hse_rate);return -EINVAL ; }@@ -684,8 +686,7 @@ static int stm32_clk_probe(struct udevice *dev) err =dev_read_phandle_with_args (dev,"st,syscfg" ,NULL ,0 ,0 , &args);if (err) { -debug ("%s: can't find syscon device (%d)\n" , __func__, - err); +dev_err (dev,"can't find syscon device (%d)\n" , err);return err; }@@ -699,10 +700,10 @@ static int stm32_clk_probe(struct udevice *dev)static int stm32_clk_of_xlate (struct clk *clk,struct ofnode_phandle_args *args)
drivers/clk/clk_stm32f.c static int stm32_clk_probe(struct udevice *dev) · line 709
Quoted 10 lines
drivers/clk/clk_stm32f.c +2
-2{ -debug ("%s(clk=%p)\n" , __func__, clk); +dev_dbg (clk->dev,"clk=%p\n" , clk);if (args->args_count !=2 ) { -debug ("Invaild args_count: %d\n" , args->args_count); +dev_dbg (clk->dev,"Invaild args_count: %d\n" , args->args_count);return -EINVAL ; }
Thanks
PATCH 19/33 clk: clk_stm32h7: migrate trace to dev and log macro
In reply to Patrick DelaunayChange debug and pr_ macro to dev macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
---
drivers/clk/clk_stm32h7.c | 70 +++++++++++++++++++++------------------ 1 file changed, 38 insertions(+), 32 deletions(-)
drivers/clk/clk_stm32h7.c +38 -32
@@ -4,6 +4,8 @@* Author(s): Patrice Chotard, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_CLK +#include <common.h> #include <clk-uclass.h> #include <dm.h>
@@ -11,6 +13,7 @@#include <regmap.h> #include <syscon.h> #include <asm/io.h> +#include <dm/device_compat.h> #include <dm/root.h> #include <linux/bitops.h>
@@ -465,18 +468,18 @@ static ulong stm32_get_rate(struct stm32_rcc_regs *regs, enum pllsrc pllsrc)int ret;const char *name = pllsrc_name[pllsrc]; -debug ("%s name %s\n" , __func__, name); +log_debug ("pllsrc name %s\n" , name); clk.id =0 ; ret =uclass_get_device_by_name (UCLASS_CLK , name, &fixed_clock_dev);if (ret) { -pr_err ("Can't find clk %s (%d)" , name, ret); +log_err ("Can't find clk %s (%d)" , name, ret);return 0 ; } ret =clk_request (fixed_clock_dev, &clk);if (ret) { -pr_err ("Can't request %s clk (%d)" , name, ret); +log_err ("Can't request %s clk (%d)" , name, ret);return 0 ; }
@@ -484,8 +487,7 @@ static ulong stm32_get_rate(struct stm32_rcc_regs *regs, enum pllsrc pllsrc)if (pllsrc ==HSI ) divider =stm32_get_HSI_divider (regs); -debug ("%s divider %d rate %ld\n" , __func__, - divider,clk_get_rate (&clk)); +log_debug ("divider %d rate %ld\n" , divider,clk_get_rate (&clk));return clk_get_rate (&clk) >> divider; };
@@ -516,7 +518,7 @@ static u32 stm32_get_PLL1_rate(struct stm32_rcc_regs *regs,break ;case RCC_PLLCKSELR_PLLSRC_NO_CLK :/* shouldn't happen */ -pr_err ("wrong value for RCC_PLLCKSELR register\n" ); +log_err ("wrong value for RCC_PLLCKSELR register\n" ); pllsrc =0 ;break ; }
@@ -546,10 +548,10 @@ static u32 stm32_get_PLL1_rate(struct stm32_rcc_regs *regs, vco = (pllsrc / divm1) * divn1; rate = (pllsrc * fracn1) / (divm1 *8192 ); -debug ("%s divm1 = %d divn1 = %d divp1 = %d divq1 = %d divr1 = %d\n" , - __func__, divm1, divn1, divp1, divq1, divr1); -debug ("%s fracn1 = %d vco = %ld rate = %ld\n" , - __func__, fracn1, vco, rate); +log_debug ("divm1 = %d divn1 = %d divp1 = %d divq1 = %d divr1 = %d\n" , + divm1, divn1, divp1, divq1, divr1); +log_debug ("fracn1 = %d vco = %ld rate = %ld\n" , + fracn1, vco, rate);switch (output) {case PLL1_P_CK :
@@ -610,7 +612,7 @@ u32 psc = stm32_get_apb_psc(regs, apb);case 16 :return sysclk /4 ;default : -pr_err ("unexpected prescaler value (%d)\n" , psc); +log_err ("unexpected prescaler value (%d)\n" , psc);return 0 ; }else
@@ -623,7 +625,7 @@ u32 psc = stm32_get_apb_psc(regs, apb);case 16 :return sysclk / psc;default : -pr_err ("unexpected prescaler value (%d)\n" , psc); +log_err ("unexpected prescaler value (%d)\n" , psc);return 0 ; } };
@@ -665,8 +667,8 @@ static ulong stm32_clk_get_rate(struct clk *clk)if (!sysclk)return sysclk; -debug ("%s system clock: source = %d freq = %ld\n" , - __func__, source, sysclk); +dev_dbg (clk->dev,"system clock: source = %d freq = %ld\n" , + source, sysclk); d1cfgr =readl (®s->d1cfgr);
@@ -685,8 +687,8 @@ static ulong stm32_clk_get_rate(struct clk *clk) gate_offset = clk_map[clk->id].gate_offset; -debug ("%s clk->id=%ld gate_offset=0x%x sysclk=%ld\n" , - __func__, clk->id, gate_offset, sysclk); +dev_dbg (clk->dev,"clk->id=%ld gate_offset=0x%x sysclk=%ld\n" , + clk->id, gate_offset, sysclk);switch (gate_offset) {case RCC_AHB3ENR :
@@ -704,8 +706,8 @@ static ulong stm32_clk_get_rate(struct clk *clk) sysclk = sysclk / prescaler_table[idx]; } -debug ("%s system clock: freq after APB3 prescaler = %ld\n" , - __func__, sysclk); +dev_dbg (clk->dev,"system clock: freq after APB3 prescaler = %ld\n" , + sysclk);return sysclk;break ;
@@ -719,8 +721,9 @@ static ulong stm32_clk_get_rate(struct clk *clk) sysclk = sysclk / prescaler_table[idx]; } -debug ("%s system clock: freq after APB4 prescaler = %ld\n" , - __func__, sysclk); +dev_dbg (clk->dev, +"system clock: freq after APB4 prescaler = %ld\n" , + sysclk);return sysclk;break ;
@@ -741,8 +744,9 @@ static ulong stm32_clk_get_rate(struct clk *clk)return stm32_get_timer_rate (priv, sysclk,APB1 ); } -debug ("%s system clock: freq after APB1 prescaler = %ld\n" , - __func__, sysclk); +dev_dbg (clk->dev, +"system clock: freq after APB1 prescaler = %ld\n" , + sysclk);return (sysclk /stm32_get_apb_psc (regs,APB1 ));break ;
@@ -758,15 +762,17 @@ static ulong stm32_clk_get_rate(struct clk *clk)return stm32_get_timer_rate (priv, sysclk,APB2 ); } -debug ("%s system clock: freq after APB2 prescaler = %ld\n" , - __func__, sysclk); +dev_dbg (clk->dev, +"system clock: freq after APB2 prescaler = %ld\n" , + sysclk);return (sysclk /stm32_get_apb_psc (regs,APB2 ));break ;default : -pr_err ("unexpected gate_offset value (0x%x)\n" , gate_offset); +dev_err (clk->dev,"unexpected gate_offset value (0x%x)\n" , + gate_offset);return -EINVAL ;break ; }
@@ -783,9 +789,9 @@ static int stm32_clk_enable(struct clk *clk) gate_offset = clk_map[clk_id].gate_offset; gate_bit_index = clk_map[clk_id].gate_bit_idx; -debug ("%s: clkid=%ld gate offset=0x%x bit_index=%d name=%s\n" , - __func__, clk->id, gate_offset, gate_bit_index, - clk_map[clk_id].name); +dev_dbg (clk->dev,"clkid=%ld gate offset=0x%x bit_index=%d name=%s\n" , + clk->id, gate_offset, gate_bit_index, + clk_map[clk_id].name);setbits_le32 (®s->cr + (gate_offset /4 ),BIT (gate_bit_index));
@@ -810,13 +816,13 @@ static int stm32_clk_probe(struct udevice *dev) "st,syscfg", &syscon);if (err) { -pr_err ("unable to find syscon device\n" ); +dev_err (dev,"unable to find syscon device\n" );return err; } priv->pwr_regmap =syscon_get_regmap (syscon);if (!priv->pwr_regmap) { -pr_err ("unable to find regmap\n" ); +dev_err (dev,"unable to find regmap\n" );return -ENODEV ; }
@@ -829,7 +835,7 @@ static int stm32_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args) {if (args->args_count !=1 ) { -debug ("Invaild args_count: %d\n" , args->args_count); +dev_dbg (clk->dev,"Invaild args_count: %d\n" , args->args_count);return -EINVAL ; }
@@ -852,7 +858,7 @@ static int stm32_clk_of_xlate(struct clk *clk, clk->id =0 ; } -debug ("%s clk->id %ld\n" , __func__, clk->id); +dev_dbg (clk->dev,"clk->id %ld\n" , clk->id);return 0 ; }
Signature · 1 line
2.17.1
PATCH 19/33 clk: clk_stm32h7: migrate trace to dev and log macro
Hi Patrick
Quoted 223 lines · Patrick Delaunay
Change debug and
pr_macro to dev macro and defineLOG_CATEGORY.Remove the "%s:"
__func__header as it is managed by dev macro (dev->nameis displayed) or log macro (CONFIG_LOGF_FUNC).Signed-off-by Patrick Delaunay <[email protected]>---
drivers/clk/clk_stm32h7.c | 70 +++++++++++++++++++++------------------ 1 file changed, 38 insertions(+), 32 deletions(-)drivers/clk/clk_stm32h7.c +37
-31@@ -4,6 +4,8 @@* Author(s): Patrice Chotard, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_CLK +#include <common.h> #include <clk-uclass.h> #include <dm.h> @@ -11,6 +13,7 @@#include <regmap.h> #include <syscon.h> #include <asm/io.h> +#include <dm/device_compat.h> #include <dm/root.h> #include <linux/bitops.h> @@ -465,18 +468,18 @@ static ulong stm32_get_rate(struct stm32_rcc_regs *regs, enum pllsrc pllsrc)int ret;const char *name = pllsrc_name[pllsrc]; -debug ("%s name %s\n" , __func__, name); +log_debug ("pllsrc name %s\n" , name); clk.id =0 ; ret =uclass_get_device_by_name (UCLASS_CLK , name, &fixed_clock_dev);if (ret) { -pr_err ("Can't find clk %s (%d)" , name, ret); +log_err ("Can't find clk %s (%d)" , name, ret);return 0 ; } ret =clk_request (fixed_clock_dev, &clk);if (ret) { -pr_err ("Can't request %s clk (%d)" , name, ret); +log_err ("Can't request %s clk (%d)" , name, ret);return 0 ; }@@ -484,8 +487,7 @@ static ulong stm32_get_rate(struct stm32_rcc_regs *regs, enum pllsrc pllsrc)if (pllsrc ==HSI ) divider =stm32_get_HSI_divider (regs); -debug ("%s divider %d rate %ld\n" , __func__, - divider,clk_get_rate (&clk)); +log_debug ("divider %d rate %ld\n" , divider,clk_get_rate (&clk));return clk_get_rate (&clk) >> divider; };@@ -516,7 +518,7 @@ static u32 stm32_get_PLL1_rate(struct stm32_rcc_regs *regs,break ;case RCC_PLLCKSELR_PLLSRC_NO_CLK :/* shouldn't happen */ -pr_err ("wrong value for RCC_PLLCKSELR register\n" ); +log_err ("wrong value for RCC_PLLCKSELR register\n" ); pllsrc =0 ;break ; }@@ -546,10 +548,10 @@ static u32 stm32_get_PLL1_rate(struct stm32_rcc_regs *regs, vco = (pllsrc / divm1) * divn1; rate = (pllsrc * fracn1) / (divm1 *8192 ); -debug ("%s divm1 = %d divn1 = %d divp1 = %d divq1 = %d divr1 = %d\n" , - __func__, divm1, divn1, divp1, divq1, divr1); -debug ("%s fracn1 = %d vco = %ld rate = %ld\n" , - __func__, fracn1, vco, rate); +log_debug ("divm1 = %d divn1 = %d divp1 = %d divq1 = %d divr1 = %d\n" , + divm1, divn1, divp1, divq1, divr1); +log_debug ("fracn1 = %d vco = %ld rate = %ld\n" , + fracn1, vco, rate);switch (output) {case PLL1_P_CK :@@ -610,7 +612,7 @@ u32 psc = stm32_get_apb_psc(regs, apb);case 16 :return sysclk /4 ;default : -pr_err ("unexpected prescaler value (%d)\n" , psc); +log_err ("unexpected prescaler value (%d)\n" , psc);return 0 ; }else @@ -623,7 +625,7 @@ u32 psc = stm32_get_apb_psc(regs, apb);case 16 :return sysclk / psc;default : -pr_err ("unexpected prescaler value (%d)\n" , psc); +log_err ("unexpected prescaler value (%d)\n" , psc);return 0 ; } };@@ -665,8 +667,8 @@ static ulong stm32_clk_get_rate(struct clk *clk)if (!sysclk)return sysclk; -debug ("%s system clock: source = %d freq = %ld\n" , - __func__, source, sysclk); +dev_dbg (clk->dev,"system clock: source = %d freq = %ld\n" , + source, sysclk); d1cfgr =readl (®s->d1cfgr);@@ -685,8 +687,8 @@ static ulong stm32_clk_get_rate(struct clk *clk) gate_offset = clk_map[clk->id].gate_offset; -debug ("%s clk->id=%ld gate_offset=0x%x sysclk=%ld\n" , - __func__, clk->id, gate_offset, sysclk); +dev_dbg (clk->dev,"clk->id=%ld gate_offset=0x%x sysclk=%ld\n" , + clk->id, gate_offset, sysclk);switch (gate_offset) {case RCC_AHB3ENR :@@ -704,8 +706,8 @@ static ulong stm32_clk_get_rate(struct clk *clk) sysclk = sysclk / prescaler_table[idx]; } -debug ("%s system clock: freq after APB3 prescaler = %ld\n" , - __func__, sysclk); +dev_dbg (clk->dev,"system clock: freq after APB3 prescaler = %ld\n" , + sysclk);return sysclk;break ;@@ -719,8 +721,9 @@ static ulong stm32_clk_get_rate(struct clk *clk) sysclk = sysclk / prescaler_table[idx]; } -debug ("%s system clock: freq after APB4 prescaler = %ld\n" , - __func__, sysclk); +dev_dbg (clk->dev, +"system clock: freq after APB4 prescaler = %ld\n" , + sysclk);return sysclk;break ;@@ -741,8 +744,9 @@ static ulong stm32_clk_get_rate(struct clk *clk)return stm32_get_timer_rate (priv, sysclk,APB1 ); } -debug ("%s system clock: freq after APB1 prescaler = %ld\n" , - __func__, sysclk); +dev_dbg (clk->dev, +"system clock: freq after APB1 prescaler = %ld\n" , + sysclk);return (sysclk /stm32_get_apb_psc (regs,APB1 ));break ;@@ -758,15 +762,17 @@ static ulong stm32_clk_get_rate(struct clk *clk)return stm32_get_timer_rate (priv, sysclk,APB2 ); } -debug ("%s system clock: freq after APB2 prescaler = %ld\n" , - __func__, sysclk); +dev_dbg (clk->dev, +"system clock: freq after APB2 prescaler = %ld\n" , + sysclk);return (sysclk /stm32_get_apb_psc (regs,APB2 ));break ;default : -pr_err ("unexpected gate_offset value (0x%x)\n" , gate_offset); +dev_err (clk->dev,"unexpected gate_offset value (0x%x)\n" , + gate_offset);return -EINVAL ;break ; }@@ -783,9 +789,9 @@ static int stm32_clk_enable(struct clk *clk) gate_offset = clk_map[clk_id].gate_offset; gate_bit_index = clk_map[clk_id].gate_bit_idx; -debug ("%s: clkid=%ld gate offset=0x%x bit_index=%d name=%s\n" , - __func__, clk->id, gate_offset, gate_bit_index, - clk_map[clk_id].name); +dev_dbg (clk->dev,"clkid=%ld gate offset=0x%x bit_index=%d name=%s\n" , + clk->id, gate_offset, gate_bit_index, + clk_map[clk_id].name);setbits_le32 (®s->cr + (gate_offset /4 ),BIT (gate_bit_index));@@ -810,13 +816,13 @@ static int stm32_clk_probe(struct udevice *dev) "st,syscfg", &syscon);if (err) { -pr_err ("unable to find syscon device\n" ); +dev_err (dev,"unable to find syscon device\n" );return err; } priv->pwr_regmap =syscon_get_regmap (syscon);if (!priv->pwr_regmap) { -pr_err ("unable to find regmap\n" ); +dev_err (dev,"unable to find regmap\n" );return -ENODEV ; }@@ -829,7 +835,7 @@ static int stm32_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args) {if (args->args_count !=1 ) { -debug ("Invaild args_count: %d\n" , args->args_count); +dev_dbg (clk->dev,"Invaild args_count: %d\n" , args->args_count);return -EINVAL ; }
drivers/clk/clk_stm32h7.c static int stm32_clk_of_xlate(struct clk *clk, · line 864
Quoted 8 lines
drivers/clk/clk_stm32h7.c +1
-1@@ -852,7 +858,7 @@ static int stm32_clk_of_xlate(struct clk *clk, clk->id =0 ; } -debug ("%s clk->id %ld\n" , __func__, clk->id); +dev_dbg (clk->dev,"clk->id %ld\n" , clk->id);return 0 ; }
Thanks
PATCH 20/33 reset: stm32-reset: migrate trace to dev and log macro
In reply to Patrick DelaunayChange debug to dev_dbg macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed).
---
drivers/reset/stm32-reset.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/reset/stm32-reset.c +9 -4
@@ -4,6 +4,8 @@* Author(s): Patrice Chotard, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_RESET +#include <common.h> #include <dm.h> #include <errno.h>
@@ -12,6 +14,7 @@#include <reset-uclass.h> #include <stm32_rcc.h> #include <asm/io.h> +#include <dm/device_compat.h> #include <linux/bitops.h> /* reset clear offset for STM32MP RCC */
@@ -36,8 +39,9 @@ static int stm32_reset_assert(struct reset_ctl *reset_ctl)struct stm32_reset_priv *priv =dev_get_priv (reset_ctl->dev);int bank = (reset_ctl->id /BITS_PER_LONG ) *4 ;int offset = reset_ctl->id %BITS_PER_LONG ; -debug ("%s: reset id = %ld bank = %d offset = %d)\n" , __func__, - reset_ctl->id, bank, offset); + +dev_dbg (reset_ctl->dev,"reset id = %ld bank = %d offset = %d)\n" , + reset_ctl->id, bank, offset);if (dev_get_driver_data (reset_ctl->dev) ==STM32MP1 )/* reset assert is done in rcc set register */
@@ -53,8 +57,9 @@ static int stm32_reset_deassert(struct reset_ctl *reset_ctl)struct stm32_reset_priv *priv =dev_get_priv (reset_ctl->dev);int bank = (reset_ctl->id /BITS_PER_LONG ) *4 ;int offset = reset_ctl->id %BITS_PER_LONG ; -debug ("%s: reset id = %ld bank = %d offset = %d)\n" , __func__, - reset_ctl->id, bank, offset); + +dev_dbg (reset_ctl->dev,"reset id = %ld bank = %d offset = %d)\n" , + reset_ctl->id, bank, offset);if (dev_get_driver_data (reset_ctl->dev) ==STM32MP1 )/* reset deassert is done in rcc clr register */
Signature · 1 line
2.17.1
PATCH 20/33 reset: stm32-reset: migrate trace to dev and log macro
Hi Patrick
Quoted 46 lines · Patrick Delaunay
Change debug to
dev_dbgmacro and defineLOG_CATEGORY.Remove the "%s:"
__func__header as it is managed by dev macro (dev->nameis displayed).Signed-off-by Patrick Delaunay <[email protected]>---
drivers/reset/stm32-reset.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)drivers/reset/stm32-reset.c +6
-2@@ -4,6 +4,8 @@* Author(s): Patrice Chotard, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_RESET +#include <common.h> #include <dm.h> #include <errno.h> @@ -12,6 +14,7 @@#include <reset-uclass.h> #include <stm32_rcc.h> #include <asm/io.h> +#include <dm/device_compat.h> #include <linux/bitops.h> /* reset clear offset for STM32MP RCC */ @@ -36,8 +39,9 @@ static int stm32_reset_assert(struct reset_ctl *reset_ctl)struct stm32_reset_priv *priv =dev_get_priv (reset_ctl->dev);int bank = (reset_ctl->id /BITS_PER_LONG ) *4 ;int offset = reset_ctl->id %BITS_PER_LONG ; -debug ("%s: reset id = %ld bank = %d offset = %d)\n" , __func__, - reset_ctl->id, bank, offset); + +dev_dbg (reset_ctl->dev,"reset id = %ld bank = %d offset = %d)\n" , + reset_ctl->id, bank, offset);if (dev_get_driver_data (reset_ctl->dev) ==STM32MP1 )/* reset assert is done in rcc set register */ @@ -53,8 +57,9 @@ static int stm32_reset_deassert(struct reset_ctl *reset_ctl)struct stm32_reset_priv *priv =dev_get_priv (reset_ctl->dev);
drivers/reset/stm32-reset.c static int stm32_reset_deassert(struct reset_ctl *reset_ctl) · line 65
Quoted 10 lines
drivers/reset/stm32-reset.c +3
-2int bank = (reset_ctl->id /BITS_PER_LONG ) *4 ;int offset = reset_ctl->id %BITS_PER_LONG ; -debug ("%s: reset id = %ld bank = %d offset = %d)\n" , __func__, - reset_ctl->id, bank, offset); + +dev_dbg (reset_ctl->dev,"reset id = %ld bank = %d offset = %d)\n" , + reset_ctl->id, bank, offset);if (dev_get_driver_data (reset_ctl->dev) ==STM32MP1 )/* reset deassert is done in rcc clr register */
Thanks
PATCH 21/33 mailbox: stm32-ipcc: migrate trace to dev and log macro
In reply to Patrick DelaunayChange debug to dev_dbg macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
---
drivers/mailbox/stm32-ipcc.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
drivers/mailbox/stm32-ipcc.c +9 -7
@@ -3,6 +3,8 @@* Copyright (C) STMicroelectronics 2019 - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_MAILBOX +#include <common.h> #include <clk.h> #include <dm.h>
@@ -44,11 +46,11 @@ static int stm32_ipcc_request(struct mbox_chan *chan) {struct stm32_ipcc *ipcc =dev_get_priv (chan->dev); -debug ("%s(chan=%p)\n" , __func__, chan); +dev_dbg (chan->dev,"chan=%p\n" , chan);if (chan->id >= ipcc->n_chans) { -debug ("%s failed to request channel: %ld\n" , - __func__, chan->id); +dev_dbg (chan->dev,"failed to request channel: %ld\n" , + chan->id);return -EINVAL ; }
@@ -57,7 +59,7 @@ static int stm32_ipcc_request(struct mbox_chan *chan)static int stm32_ipcc_free (struct mbox_chan *chan) { -debug ("%s(chan=%p)\n" , __func__, chan); +dev_dbg (chan->dev,"chan=%p\n" , chan);return 0 ; }
@@ -66,7 +68,7 @@ static int stm32_ipcc_send(struct mbox_chan *chan, const void *data) {struct stm32_ipcc *ipcc =dev_get_priv (chan->dev); -debug ("%s(chan=%p, data=%p)\n" , __func__, chan, data); +dev_dbg (chan->dev,"chan=%p, data=%p\n" , chan, data);if (readl (ipcc->reg_proc +IPCC_XTOYSR ) &BIT (chan->id))return -EBUSY ;
@@ -83,7 +85,7 @@ static int stm32_ipcc_recv(struct mbox_chan *chan, void *data)u32 val;int proc_offset; -debug ("%s(chan=%p, data=%p)\n" , __func__, chan, data); +dev_dbg (chan->dev,"chan=%p, data=%p\n" , chan, data);/* read 'channel occupied' status from other proc */ proc_offset = ipcc->proc_id ? -IPCC_PROC_OFFST :IPCC_PROC_OFFST ;
@@ -104,7 +106,7 @@ static int stm32_ipcc_probe(struct udevice *dev)struct clk clk;int ret; -debug ("%s(dev=%p)\n" , __func__, dev); +dev_dbg (dev,"\n" ); addr =dev_read_addr (dev);if (addr ==FDT_ADDR_T_NONE )
Signature · 1 line
2.17.1
PATCH 21/33 mailbox: stm32-ipcc: migrate trace to dev and log macro
Hi Patrick
Quoted 67 lines · Patrick Delaunay
Change debug to
dev_dbgmacro and defineLOG_CATEGORY.Remove the "%s:"
__func__header as it is managed by dev macro (dev->nameis displayed) or log macro (CONFIG_LOGF_FUNC).Signed-off-by Patrick Delaunay <[email protected]>---
drivers/mailbox/stm32-ipcc.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)drivers/mailbox/stm32-ipcc.c +8
-6@@ -3,6 +3,8 @@* Copyright (C) STMicroelectronics 2019 - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_MAILBOX +#include <common.h> #include <clk.h> #include <dm.h> @@ -44,11 +46,11 @@ static int stm32_ipcc_request(struct mbox_chan *chan) {struct stm32_ipcc *ipcc =dev_get_priv (chan->dev); -debug ("%s(chan=%p)\n" , __func__, chan); +dev_dbg (chan->dev,"chan=%p\n" , chan);if (chan->id >= ipcc->n_chans) { -debug ("%s failed to request channel: %ld\n" , - __func__, chan->id); +dev_dbg (chan->dev,"failed to request channel: %ld\n" , + chan->id);return -EINVAL ; }@@ -57,7 +59,7 @@ static int stm32_ipcc_request(struct mbox_chan *chan)static int stm32_ipcc_free (struct mbox_chan *chan) { -debug ("%s(chan=%p)\n" , __func__, chan); +dev_dbg (chan->dev,"chan=%p\n" , chan);return 0 ; }@@ -66,7 +68,7 @@ static int stm32_ipcc_send(struct mbox_chan *chan, const void *data) {struct stm32_ipcc *ipcc =dev_get_priv (chan->dev); -debug ("%s(chan=%p, data=%p)\n" , __func__, chan, data); +dev_dbg (chan->dev,"chan=%p, data=%p\n" , chan, data);if (readl (ipcc->reg_proc +IPCC_XTOYSR ) &BIT (chan->id))return -EBUSY ;@@ -83,7 +85,7 @@ static int stm32_ipcc_recv(struct mbox_chan *chan, void *data)u32 val;int proc_offset; -debug ("%s(chan=%p, data=%p)\n" , __func__, chan, data); +dev_dbg (chan->dev,"chan=%p, data=%p\n" , chan, data);/* read 'channel occupied' status from other proc */ proc_offset = ipcc->proc_id ? -IPCC_PROC_OFFST :IPCC_PROC_OFFST ;
drivers/mailbox/stm32-ipcc.c static int stm32_ipcc_probe(struct udevice *dev) · line 112
Quoted 8 lines
drivers/mailbox/stm32-ipcc.c +1
-1@@ -104,7 +106,7 @@ static int stm32_ipcc_probe(struct udevice *dev)struct clk clk;int ret; -debug ("%s(dev=%p)\n" , __func__, dev); +dev_dbg (dev,"\n" ); addr =dev_read_addr (dev);if (addr ==FDT_ADDR_T_NONE )
Thanks
PATCH 22/33 i2c: stm32f7_i2c: migrate trace to dev and log macro
In reply to Patrick DelaunayChange debug to dev_dbg macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
---
drivers/i2c/stm32f7_i2c.c | 74 +++++++++++++++++++-------------------- 1 file changed, 37 insertions(+), 37 deletions(-)
drivers/i2c/stm32f7_i2c.c +37 -37
@@ -3,6 +3,8 @@* (C) Copyright 2017 STMicroelectronics */ +#define LOG_CATEGORY UCLASS_I2C +#include <common.h> #include <clk.h> #include <dm.h>
@@ -11,10 +13,10 @@#include <regmap.h> #include <reset.h> #include <syscon.h> +#include <dm/device.h> +#include <dm/device_compat.h> #include <linux/bitops.h> #include <linux/delay.h> - -#include <dm/device.h> #include <linux/err.h> #include <linux/io.h>
@@ -346,7 +348,7 @@ static int stm32_i2c_wait_flags(struct stm32_i2c_priv *i2c_priv, *status =readl (®s->isr);while (!(*status & flags)) {if (get_timer (time_start) >CONFIG_SYS_HZ ) { -debug ("%s: i2c timeout\n" , __func__); +log_debug ("i2c timeout\n" );return -ETIMEDOUT ; }
@@ -369,7 +371,7 @@ static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv)return ret;if (status &STM32_I2C_ISR_BERR ) { -debug ("%s: Bus error\n" , __func__); +log_debug ("Bus error\n" );/* Clear BERR flag */ setbits_le32 (®s->icr,STM32_I2C_ICR_BERRCF );
@@ -378,7 +380,7 @@ static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv) }if (status &STM32_I2C_ISR_ARLO ) { -debug ("%s: Arbitration lost\n" , __func__); +log_debug ("Arbitration lost\n" );/* Clear ARLO flag */ setbits_le32 (®s->icr,STM32_I2C_ICR_ARLOCF );
@@ -387,7 +389,7 @@ static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv) }if (status &STM32_I2C_ISR_NACKF ) { -debug ("%s: Receive NACK\n" , __func__); +log_debug ("Receive NACK\n" );/* Clear NACK flag */ setbits_le32 (®s->icr,STM32_I2C_ICR_NACKCF );
@@ -535,8 +537,8 @@ static int stm32_i2c_compute_solutions(struct stm32_i2c_setup *setup,if (sdadel_max <0 ) sdadel_max =0 ; -debug ("%s: SDADEL(min/max): %i/%i, SCLDEL(Min): %i\n" , __func__, - sdadel_min, sdadel_max, scldel_min); +log_debug ("SDADEL(min/max): %i/%i, SCLDEL(Min): %i\n" , + sdadel_min, sdadel_max, scldel_min);/* Compute possible values for PRESC, SCLDEL and SDADEL */ for (p =0 ; p <STM32_PRESC_MAX ; p++) {
@@ -572,7 +574,7 @@ static int stm32_i2c_compute_solutions(struct stm32_i2c_setup *setup, }if (list_empty (solutions)) { -pr_err ("%s: no Prescaler solution\n" , __func__); +log_err ("no Prescaler solution\n" ); ret = -EPERM ; }
@@ -656,7 +658,7 @@ static int stm32_i2c_choose_solution(struct stm32_i2c_setup *setup, }if (!sol_found) { -pr_err ("%s: no solution at all\n" , __func__); +log_err ("no solution@all\n" ); ret = -EPERM ; }
@@ -686,23 +688,22 @@ static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv, specs =get_specs (setup->speed_freq);if (specs ==ERR_PTR (-EINVAL )) { -pr_err ("%s: speed out of bound {%d}\n" , __func__, - setup->speed_freq); +log_err ("speed out of bound {%d}\n" , + setup->speed_freq);return -EINVAL ; }if (setup->rise_time > specs->rise_max || setup->fall_time > specs->fall_max) { -pr_err ("%s :timings out of bound Rise{%d>%d}/Fall{%d>%d}\n" , - __func__, - setup->rise_time, specs->rise_max, - setup->fall_time, specs->fall_max); +log_err ("timings out of bound Rise{%d>%d}/Fall{%d>%d}\n" , + setup->rise_time, specs->rise_max, + setup->fall_time, specs->fall_max);return -EINVAL ; }if (setup->dnf >STM32_I2C_DNF_MAX ) { -pr_err ("%s: DNF out of bound %d/%d\n" , __func__, - setup->dnf,STM32_I2C_DNF_MAX ); +log_err ("DNF out of bound %d/%d\n" , + setup->dnf,STM32_I2C_DNF_MAX );return -EINVAL ; }
@@ -715,10 +716,10 @@ static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv,if (ret) goto exit; -debug ("%s: Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n" , - __func__, output->presc, - output->scldel, output->sdadel, - output->scll, output->sclh); +log_debug ("Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n" , + output->presc, + output->scldel, output->sdadel, + output->scll, output->sclh); exit:/* Release list and memory */
@@ -751,20 +752,19 @@ static int stm32_i2c_setup_timing(struct stm32_i2c_priv *i2c_priv, setup->clock_src =clk_get_rate (&i2c_priv->clk);if (!setup->clock_src) { -pr_err ("%s: clock rate is 0\n" , __func__); +log_err ("clock rate is 0\n" );return -EINVAL ; } do { ret = stm32_i2c_compute_timing(i2c_priv, setup, timing); if (ret) { - debug("%s: failed to compute I2C timings.\n", - __func__); + log_debug("failed to compute I2C timings.\n"); if (setup->speed_freq > I2C_SPEED_STANDARD_RATE) { setup->speed_freq = get_lower_rate(setup->speed_freq); - debug("%s: downgrade I2C Speed Freq to (%i)\n", - __func__, setup->speed_freq); + log_debug("downgrade I2C Speed Freq to (%i)\n", + setup->speed_freq); } else { break; }
@@ -772,16 +772,16 @@ static int stm32_i2c_setup_timing(struct stm32_i2c_priv *i2c_priv, }while (ret);if (ret) { -pr_err ("%s: impossible to compute I2C timings.\n" , __func__); +log_err ("impossible to compute I2C timings.\n" );return ret; } -debug ("%s: I2C Freq(%i), Clk Source(%i)\n" , __func__, - setup->speed_freq, setup->clock_src); -debug ("%s: I2C Rise(%i) and Fall(%i) Time\n" , __func__, - setup->rise_time, setup->fall_time); -debug ("%s: I2C Analog Filter(%s), DNF(%i)\n" , __func__, - setup->analog_filter ?"On" :"Off" , setup->dnf); +log_debug ("I2C Freq(%i), Clk Source(%i)\n" , + setup->speed_freq, setup->clock_src); +log_debug ("I2C Rise(%i) and Fall(%i) Time\n" , + setup->rise_time, setup->fall_time); +log_debug ("I2C Analog Filter(%s), DNF(%i)\n" , + setup->analog_filter ?"On" :"Off" , setup->dnf); i2c_priv->speed = setup->speed_freq;
@@ -848,12 +848,12 @@ static int stm32_i2c_hw_config(struct stm32_i2c_priv *i2c_priv)return 0 ; } -static int stm32_i2c_set_bus_speed (struct udevice *bus,unsigned int speed) +static int stm32_i2c_set_bus_speed (struct udevice *dev,unsigned int speed) { -struct stm32_i2c_priv *i2c_priv =dev_get_priv (bus); +struct stm32_i2c_priv *i2c_priv =dev_get_priv (dev);if (speed >I2C_SPEED_FAST_PLUS_RATE ) { -debug ("%s: Speed %d not supported\n" , __func__, speed); +dev_dbg (dev,"Speed %d not supported\n" , speed);return -EINVAL ; }
Signature · 1 line
2.17.1
PATCH 22/33 i2c: stm32f7_i2c: migrate trace to dev and log macro
Hi Patrick
Quoted 203 lines · Patrick Delaunay
Change debug to
dev_dbgmacro and defineLOG_CATEGORY.Remove the "%s:"
__func__header as it is managed by dev macro (dev->nameis displayed) or log macro (CONFIG_LOGF_FUNC).Signed-off-by Patrick Delaunay <[email protected]>---
drivers/i2c/stm32f7_i2c.c | 74 +++++++++++++++++++-------------------- 1 file changed, 37 insertions(+), 37 deletions(-)drivers/i2c/stm32f7_i2c.c +35
-35@@ -3,6 +3,8 @@* (C) Copyright 2017 STMicroelectronics */ +#define LOG_CATEGORY UCLASS_I2C +#include <common.h> #include <clk.h> #include <dm.h> @@ -11,10 +13,10 @@#include <regmap.h> #include <reset.h> #include <syscon.h> +#include <dm/device.h> +#include <dm/device_compat.h> #include <linux/bitops.h> #include <linux/delay.h> - -#include <dm/device.h> #include <linux/err.h> #include <linux/io.h> @@ -346,7 +348,7 @@ static int stm32_i2c_wait_flags(struct stm32_i2c_priv *i2c_priv, *status =readl (®s->isr);while (!(*status & flags)) {if (get_timer (time_start) >CONFIG_SYS_HZ ) { -debug ("%s: i2c timeout\n" , __func__); +log_debug ("i2c timeout\n" );return -ETIMEDOUT ; }@@ -369,7 +371,7 @@ static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv)return ret;if (status &STM32_I2C_ISR_BERR ) { -debug ("%s: Bus error\n" , __func__); +log_debug ("Bus error\n" );/* Clear BERR flag */ setbits_le32 (®s->icr,STM32_I2C_ICR_BERRCF );@@ -378,7 +380,7 @@ static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv) }if (status &STM32_I2C_ISR_ARLO ) { -debug ("%s: Arbitration lost\n" , __func__); +log_debug ("Arbitration lost\n" );/* Clear ARLO flag */ setbits_le32 (®s->icr,STM32_I2C_ICR_ARLOCF );@@ -387,7 +389,7 @@ static int stm32_i2c_check_end_of_message(struct stm32_i2c_priv *i2c_priv) }if (status &STM32_I2C_ISR_NACKF ) { -debug ("%s: Receive NACK\n" , __func__); +log_debug ("Receive NACK\n" );/* Clear NACK flag */ setbits_le32 (®s->icr,STM32_I2C_ICR_NACKCF );@@ -535,8 +537,8 @@ static int stm32_i2c_compute_solutions(struct stm32_i2c_setup *setup,if (sdadel_max <0 ) sdadel_max =0 ; -debug ("%s: SDADEL(min/max): %i/%i, SCLDEL(Min): %i\n" , __func__, - sdadel_min, sdadel_max, scldel_min); +log_debug ("SDADEL(min/max): %i/%i, SCLDEL(Min): %i\n" , + sdadel_min, sdadel_max, scldel_min);/* Compute possible values for PRESC, SCLDEL and SDADEL */ for (p =0 ; p <STM32_PRESC_MAX ; p++) {@@ -572,7 +574,7 @@ static int stm32_i2c_compute_solutions(struct stm32_i2c_setup *setup, }if (list_empty (solutions)) { -pr_err ("%s: no Prescaler solution\n" , __func__); +log_err ("no Prescaler solution\n" ); ret = -EPERM ; }@@ -656,7 +658,7 @@ static int stm32_i2c_choose_solution(struct stm32_i2c_setup *setup, }if (!sol_found) { -pr_err ("%s: no solution at all\n" , __func__); +log_err ("no solution at all\n" ); ret = -EPERM ; }@@ -686,23 +688,22 @@ static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv, specs =get_specs (setup->speed_freq);if (specs ==ERR_PTR (-EINVAL )) { -pr_err ("%s: speed out of bound {%d}\n" , __func__, - setup->speed_freq); +log_err ("speed out of bound {%d}\n" , + setup->speed_freq);return -EINVAL ; }if (setup->rise_time > specs->rise_max || setup->fall_time > specs->fall_max) { -pr_err ("%s :timings out of bound Rise{%d>%d}/Fall{%d>%d}\n" , - __func__, - setup->rise_time, specs->rise_max, - setup->fall_time, specs->fall_max); +log_err ("timings out of bound Rise{%d>%d}/Fall{%d>%d}\n" , + setup->rise_time, specs->rise_max, + setup->fall_time, specs->fall_max);return -EINVAL ; }if (setup->dnf >STM32_I2C_DNF_MAX ) { -pr_err ("%s: DNF out of bound %d/%d\n" , __func__, - setup->dnf,STM32_I2C_DNF_MAX ); +log_err ("DNF out of bound %d/%d\n" , + setup->dnf,STM32_I2C_DNF_MAX );return -EINVAL ; }@@ -715,10 +716,10 @@ static int stm32_i2c_compute_timing(struct stm32_i2c_priv *i2c_priv,if (ret) goto exit; -debug ("%s: Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n" , - __func__, output->presc, - output->scldel, output->sdadel, - output->scll, output->sclh); +log_debug ("Presc: %i, scldel: %i, sdadel: %i, scll: %i, sclh: %i\n" , + output->presc, + output->scldel, output->sdadel, + output->scll, output->sclh); exit:/* Release list and memory */ @@ -751,20 +752,19 @@ static int stm32_i2c_setup_timing(struct stm32_i2c_priv *i2c_priv, setup->clock_src =clk_get_rate (&i2c_priv->clk);if (!setup->clock_src) { -pr_err ("%s: clock rate is 0\n" , __func__); +log_err ("clock rate is 0\n" );return -EINVAL ; } do { ret = stm32_i2c_compute_timing(i2c_priv, setup, timing); if (ret) { - debug("%s: failed to compute I2C timings.\n", - __func__); + log_debug("failed to compute I2C timings.\n"); if (setup->speed_freq > I2C_SPEED_STANDARD_RATE) { setup->speed_freq = get_lower_rate(setup->speed_freq); - debug("%s: downgrade I2C Speed Freq to (%i)\n", - __func__, setup->speed_freq); + log_debug("downgrade I2C Speed Freq to (%i)\n", + setup->speed_freq); } else { break; }@@ -772,16 +772,16 @@ static int stm32_i2c_setup_timing(struct stm32_i2c_priv *i2c_priv, }while (ret);if (ret) { -pr_err ("%s: impossible to compute I2C timings.\n" , __func__); +log_err ("impossible to compute I2C timings.\n" );return ret; } -debug ("%s: I2C Freq(%i), Clk Source(%i)\n" , __func__, - setup->speed_freq, setup->clock_src); -debug ("%s: I2C Rise(%i) and Fall(%i) Time\n" , __func__, - setup->rise_time, setup->fall_time); -debug ("%s: I2C Analog Filter(%s), DNF(%i)\n" , __func__, - setup->analog_filter ?"On" :"Off" , setup->dnf); +log_debug ("I2C Freq(%i), Clk Source(%i)\n" , + setup->speed_freq, setup->clock_src); +log_debug ("I2C Rise(%i) and Fall(%i) Time\n" , + setup->rise_time, setup->fall_time); +log_debug ("I2C Analog Filter(%s), DNF(%i)\n" , + setup->analog_filter ?"On" :"Off" , setup->dnf); i2c_priv->speed = setup->speed_freq;@@ -848,12 +848,12 @@ static int stm32_i2c_hw_config(struct stm32_i2c_priv *i2c_priv)return 0 ; } -static int stm32_i2c_set_bus_speed (struct udevice *bus,unsigned int speed) +static int stm32_i2c_set_bus_speed (struct udevice *dev,unsigned int speed)
drivers/i2c/stm32f7_i2c.c static int stm32_i2c_hw_config(struct stm32_i2c_priv *i2c_priv) · line 859
Quoted 10 lines
drivers/i2c/stm32f7_i2c.c +2
-2{ -struct stm32_i2c_priv *i2c_priv =dev_get_priv (bus); +struct stm32_i2c_priv *i2c_priv =dev_get_priv (dev);if (speed >I2C_SPEED_FAST_PLUS_RATE ) { -debug ("%s: Speed %d not supported\n" , __func__, speed); +dev_dbg (dev,"Speed %d not supported\n" , speed);return -EINVAL ; }
Thanks
PATCH 23/33 phy: stm32-usbphyc: migrate trace to dev and log macro
In reply to Patrick DelaunayChange pr_debug to log_debug or dev_dbg macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
---
drivers/phy/phy-stm32-usbphyc.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)
drivers/phy/phy-stm32-usbphyc.c +10 -8
@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_PHY +#include <common.h> #include <clk.h> #include <div64.h>
@@ -97,8 +99,8 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)u32 usbphyc_pll;if ((clk_rate <PLL_INFF_MIN_RATE ) || (clk_rate >PLL_INFF_MAX_RATE )) { -pr_debug ("%s: input clk freq (%dHz) out of range\n" , - __func__, clk_rate); +log_debug ("input clk freq (%dHz) out of range\n" , + clk_rate);return -EINVAL ; }
@@ -115,8 +117,8 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)writel (usbphyc_pll, usbphyc->base +STM32_USBPHYC_PLL ); -pr_debug ("%s: input clk freq=%dHz, ndiv=%d, frac=%d\n" , __func__, - clk_rate, pll_params.ndiv, pll_params.frac); +log_debug ("input clk freq=%dHz, ndiv=%d, frac=%d\n" , + clk_rate, pll_params.ndiv, pll_params.frac);return 0 ; }
@@ -153,7 +155,7 @@ static int stm32_usbphyc_phy_init(struct phy *phy) true : false;int ret; -pr_debug ("%s phy ID = %lu\n" , __func__, phy->id); +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id);/* Check if one phy port has already configured the pll */ if (pllen &&stm32_usbphyc_is_init (usbphyc)) goto initialized;
@@ -199,7 +201,7 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;int ret; -pr_debug ("%s phy ID = %lu\n" , __func__, phy->id); +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); usbphyc_phy->init = false;/* Check if other phy port requires pllen */
@@ -238,7 +240,7 @@ static int stm32_usbphyc_phy_power_on(struct phy *phy)struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;int ret; -pr_debug ("%s phy ID = %lu\n" , __func__, phy->id); +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id);if (usbphyc_phy->vdd) { ret =regulator_set_enable (usbphyc_phy->vdd, true);if (ret)
@@ -256,7 +258,7 @@ static int stm32_usbphyc_phy_power_off(struct phy *phy)struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;int ret; -pr_debug ("%s phy ID = %lu\n" , __func__, phy->id); +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); usbphyc_phy->powered = false;if (stm32_usbphyc_is_powered (usbphyc))
Signature · 1 line
2.17.1
PATCH 23/33 phy: stm32-usbphyc: migrate trace to dev and log macro
Hi Patrick
Quoted 74 lines · Patrick Delaunay
Change
pr_debugtolog_debugordev_dbgmacro and defineLOG_CATEGORY.Remove the "%s:"
__func__header as it is managed by dev macro (dev->nameis displayed) or log macro (CONFIG_LOGF_FUNC).Signed-off-by Patrick Delaunay <[email protected]>---
drivers/phy/phy-stm32-usbphyc.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)drivers/phy/phy-stm32-usbphyc.c +9
-7@@ -3,6 +3,8 @@* Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_PHY +#include <common.h> #include <clk.h> #include <div64.h> @@ -97,8 +99,8 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)u32 usbphyc_pll;if ((clk_rate <PLL_INFF_MIN_RATE ) || (clk_rate >PLL_INFF_MAX_RATE )) { -pr_debug ("%s: input clk freq (%dHz) out of range\n" , - __func__, clk_rate); +log_debug ("input clk freq (%dHz) out of range\n" , + clk_rate);return -EINVAL ; }@@ -115,8 +117,8 @@ static int stm32_usbphyc_pll_init(struct stm32_usbphyc *usbphyc)writel (usbphyc_pll, usbphyc->base +STM32_USBPHYC_PLL ); -pr_debug ("%s: input clk freq=%dHz, ndiv=%d, frac=%d\n" , __func__, - clk_rate, pll_params.ndiv, pll_params.frac); +log_debug ("input clk freq=%dHz, ndiv=%d, frac=%d\n" , + clk_rate, pll_params.ndiv, pll_params.frac);return 0 ; }@@ -153,7 +155,7 @@ static int stm32_usbphyc_phy_init(struct phy *phy) true : false;int ret; -pr_debug ("%s phy ID = %lu\n" , __func__, phy->id); +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id);/* Check if one phy port has already configured the pll */ if (pllen &&stm32_usbphyc_is_init (usbphyc)) goto initialized;@@ -199,7 +201,7 @@ static int stm32_usbphyc_phy_exit(struct phy *phy)struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;int ret; -pr_debug ("%s phy ID = %lu\n" , __func__, phy->id); +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); usbphyc_phy->init = false;/* Check if other phy port requires pllen */ @@ -238,7 +240,7 @@ static int stm32_usbphyc_phy_power_on(struct phy *phy)struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;int ret; -pr_debug ("%s phy ID = %lu\n" , __func__, phy->id); +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id);if (usbphyc_phy->vdd) { ret =regulator_set_enable (usbphyc_phy->vdd, true);if (ret)
drivers/phy/phy-stm32-usbphyc.c static int stm32_usbphyc_phy_power_off(struct phy *phy) · line 264
Quoted 8 lines
drivers/phy/phy-stm32-usbphyc.c +1
-1@@ -256,7 +258,7 @@ static int stm32_usbphyc_phy_power_off(struct phy *phy)struct stm32_usbphyc_phy *usbphyc_phy = usbphyc->phys + phy->id;int ret; -pr_debug ("%s phy ID = %lu\n" , __func__, phy->id); +dev_dbg (phy->dev,"phy ID = %lu\n" , phy->id); usbphyc_phy->powered = false;if (stm32_usbphyc_is_powered (usbphyc))
Thanks
PATCH 24/33 spi: stm32_spi: migrate trace to dev and log macro
In reply to Patrick DelaunayChange debug/pr_debug to log_debug or dev_dbg macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
---
drivers/spi/stm32_spi.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-)
drivers/spi/stm32_spi.c +17 -14
@@ -4,6 +4,9 @@* * Driver for STMicroelectronics Serial peripheral interface (SPI) */ + +#define LOG_CATEGORY UCLASS_SPI +#include <common.h> #include <clk.h> #include <dm.h>
@@ -138,7 +141,7 @@ static void stm32_spi_write_txfifo(struct stm32_spi_priv *priv) } } -debug ("%s: %d bytes left\n" , __func__, priv->tx_len); +log_debug ("%d bytes left\n" , priv->tx_len); }static void stm32_spi_read_rxfifo (struct stm32_spi_priv *priv)
@@ -176,12 +179,12 @@ static void stm32_spi_read_rxfifo(struct stm32_spi_priv *priv) rxplvl = (sr &SPI_SR_RXPLVL ) >>SPI_SR_RXPLVL_SHIFT ; } -debug ("%s: %d bytes left\n" , __func__, priv->rx_len); +log_debug ("%d bytes left\n" , priv->rx_len); }static int stm32_spi_enable (struct stm32_spi_priv *priv) { -debug ("%s\n" , __func__); +log_debug ("\n" );/* Enable the SPI hardware */ setbits_le32 (priv->base +STM32_SPI_CR1 ,SPI_CR1_SPE );
@@ -191,7 +194,7 @@ static int stm32_spi_enable(struct stm32_spi_priv *priv)static int stm32_spi_disable (struct stm32_spi_priv *priv) { -debug ("%s\n" , __func__); +log_debug ("\n" );/* Disable the SPI hardware */ clrbits_le32 (priv->base +STM32_SPI_CR1 ,SPI_CR1_SPE );
@@ -204,7 +207,7 @@ static int stm32_spi_claim_bus(struct udevice *slave)struct udevice *bus =dev_get_parent (slave);struct stm32_spi_priv *priv =dev_get_priv (bus); -debug ("%s\n" , __func__); +dev_dbg (slave,"\n" );/* Enable the SPI hardware */ return stm32_spi_enable (priv);
@@ -215,7 +218,7 @@ static int stm32_spi_release_bus(struct udevice *slave)struct udevice *bus =dev_get_parent (slave);struct stm32_spi_priv *priv =dev_get_priv (bus); -debug ("%s\n" , __func__); +dev_dbg (slave,"\n" );/* Disable the SPI hardware */ return stm32_spi_disable (priv);
@@ -227,7 +230,7 @@ static void stm32_spi_stopxfer(struct udevice *dev)u32 cr1, sr;int ret; -debug ("%s\n" , __func__); +dev_dbg (dev,"\n" ); cr1 =readl (priv->base +STM32_SPI_CR1 );
@@ -255,7 +258,7 @@ static int stm32_spi_set_cs(struct udevice *dev, unsigned int cs, bool enable) {struct stm32_spi_priv *priv =dev_get_priv (dev); -debug ("%s: cs=%d enable=%d\n" , __func__, cs, enable); +dev_dbg (dev,"cs=%d enable=%d\n" , cs, enable);if (cs >=MAX_CS_COUNT )return -ENODEV ;
@@ -274,7 +277,7 @@ static int stm32_spi_set_mode(struct udevice *bus, uint mode)struct stm32_spi_priv *priv =dev_get_priv (bus);u32 cfg2_clrb =0 , cfg2_setb =0 ; -debug ("%s: mode=%d\n" , __func__, mode); +dev_dbg (bus,"mode=%d\n" , mode);if (mode &SPI_CPOL ) cfg2_setb |=SPI_CFG2_CPOL ;
@@ -330,7 +333,7 @@ static int stm32_spi_set_speed(struct udevice *bus, uint hz)u32 mbrdiv;long div; -debug ("%s: hz=%d\n" , __func__, hz); +dev_dbg (bus,"hz=%d\n" , hz);if (priv->cur_hz == hz)return 0 ;
@@ -404,8 +407,8 @@ static int stm32_spi_xfer(struct udevice *slave, unsigned int bitlen,stm32_spi_enable (priv); } -debug ("%s: priv->tx_len=%d priv->rx_len=%d\n" , __func__, - priv->tx_len, priv->rx_len); +dev_dbg (bus,"priv->tx_len=%d priv->rx_len=%d\n" , + priv->tx_len, priv->rx_len); slave_plat =dev_get_parent_platdata (slave);if (flags &SPI_XFER_BEGIN )
@@ -477,7 +480,7 @@ static int stm32_spi_get_fifo_size(struct udevice *dev)stm32_spi_disable (priv); -debug ("%s %d x 8-bit fifo size\n" , __func__, count); +dev_dbg (dev,"%d x 8-bit fifo size\n" , count);return count; }
@@ -522,7 +525,7 @@ static int stm32_spi_probe(struct udevice *dev) ret =gpio_request_list_by_name (dev,"cs-gpios" , priv->cs_gpios,ARRAY_SIZE (priv->cs_gpios),0 );if (ret <0 ) { -pr_err ("Can't get %s cs gpios: %d" , dev->name, ret); +dev_err (dev,"Can't get cs gpios: %d" , ret); goto reset_err; }
Signature · 1 line
2.17.1
PATCH 24/33 spi: stm32_spi: migrate trace to dev and log macro
Hi Patrick
Quoted 134 lines · Patrick Delaunay
Change debug/pr_debug to
log_debugordev_dbgmacro and defineLOG_CATEGORY.Remove the "%s:"
__func__header as it is managed by dev macro (dev->nameis displayed) or log macro (CONFIG_LOGF_FUNC).Signed-off-by Patrick Delaunay <[email protected]>---
drivers/spi/stm32_spi.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-)drivers/spi/stm32_spi.c +16
-13@@ -4,6 +4,9 @@* * Driver for STMicroelectronics Serial peripheral interface (SPI) */ + +#define LOG_CATEGORY UCLASS_SPI +#include <common.h> #include <clk.h> #include <dm.h> @@ -138,7 +141,7 @@ static void stm32_spi_write_txfifo(struct stm32_spi_priv *priv) } } -debug ("%s: %d bytes left\n" , __func__, priv->tx_len); +log_debug ("%d bytes left\n" , priv->tx_len); }static void stm32_spi_read_rxfifo (struct stm32_spi_priv *priv)@@ -176,12 +179,12 @@ static void stm32_spi_read_rxfifo(struct stm32_spi_priv *priv) rxplvl = (sr &SPI_SR_RXPLVL ) >>SPI_SR_RXPLVL_SHIFT ; } -debug ("%s: %d bytes left\n" , __func__, priv->rx_len); +log_debug ("%d bytes left\n" , priv->rx_len); }static int stm32_spi_enable (struct stm32_spi_priv *priv) { -debug ("%s\n" , __func__); +log_debug ("\n" );/* Enable the SPI hardware */ setbits_le32 (priv->base +STM32_SPI_CR1 ,SPI_CR1_SPE );@@ -191,7 +194,7 @@ static int stm32_spi_enable(struct stm32_spi_priv *priv)static int stm32_spi_disable (struct stm32_spi_priv *priv) { -debug ("%s\n" , __func__); +log_debug ("\n" );/* Disable the SPI hardware */ clrbits_le32 (priv->base +STM32_SPI_CR1 ,SPI_CR1_SPE );@@ -204,7 +207,7 @@ static int stm32_spi_claim_bus(struct udevice *slave)struct udevice *bus =dev_get_parent (slave);struct stm32_spi_priv *priv =dev_get_priv (bus); -debug ("%s\n" , __func__); +dev_dbg (slave,"\n" );/* Enable the SPI hardware */ return stm32_spi_enable (priv);@@ -215,7 +218,7 @@ static int stm32_spi_release_bus(struct udevice *slave)struct udevice *bus =dev_get_parent (slave);struct stm32_spi_priv *priv =dev_get_priv (bus); -debug ("%s\n" , __func__); +dev_dbg (slave,"\n" );/* Disable the SPI hardware */ return stm32_spi_disable (priv);@@ -227,7 +230,7 @@ static void stm32_spi_stopxfer(struct udevice *dev)u32 cr1, sr;int ret; -debug ("%s\n" , __func__); +dev_dbg (dev,"\n" ); cr1 =readl (priv->base +STM32_SPI_CR1 );@@ -255,7 +258,7 @@ static int stm32_spi_set_cs(struct udevice *dev, unsigned int cs, bool enable) {struct stm32_spi_priv *priv =dev_get_priv (dev); -debug ("%s: cs=%d enable=%d\n" , __func__, cs, enable); +dev_dbg (dev,"cs=%d enable=%d\n" , cs, enable);if (cs >=MAX_CS_COUNT )return -ENODEV ;@@ -274,7 +277,7 @@ static int stm32_spi_set_mode(struct udevice *bus, uint mode)struct stm32_spi_priv *priv =dev_get_priv (bus);u32 cfg2_clrb =0 , cfg2_setb =0 ; -debug ("%s: mode=%d\n" , __func__, mode); +dev_dbg (bus,"mode=%d\n" , mode);if (mode &SPI_CPOL ) cfg2_setb |=SPI_CFG2_CPOL ;@@ -330,7 +333,7 @@ static int stm32_spi_set_speed(struct udevice *bus, uint hz)u32 mbrdiv;long div; -debug ("%s: hz=%d\n" , __func__, hz); +dev_dbg (bus,"hz=%d\n" , hz);if (priv->cur_hz == hz)return 0 ;@@ -404,8 +407,8 @@ static int stm32_spi_xfer(struct udevice *slave, unsigned int bitlen,stm32_spi_enable (priv); } -debug ("%s: priv->tx_len=%d priv->rx_len=%d\n" , __func__, - priv->tx_len, priv->rx_len); +dev_dbg (bus,"priv->tx_len=%d priv->rx_len=%d\n" , + priv->tx_len, priv->rx_len); slave_plat =dev_get_parent_platdata (slave);if (flags &SPI_XFER_BEGIN )@@ -477,7 +480,7 @@ static int stm32_spi_get_fifo_size(struct udevice *dev)stm32_spi_disable (priv); -debug ("%s %d x 8-bit fifo size\n" , __func__, count); +dev_dbg (dev,"%d x 8-bit fifo size\n" , count);return count; }
drivers/spi/stm32_spi.c static int stm32_spi_probe(struct udevice *dev) · line 531
Quoted 8 lines
drivers/spi/stm32_spi.c +1
-1@@ -522,7 +525,7 @@ static int stm32_spi_probe(struct udevice *dev) ret =gpio_request_list_by_name (dev,"cs-gpios" , priv->cs_gpios,ARRAY_SIZE (priv->cs_gpios),0 );if (ret <0 ) { -pr_err ("Can't get %s cs gpios: %d" , dev->name, ret); +dev_err (dev,"Can't get cs gpios: %d" , ret); goto reset_err; }
Thanks
PATCH 25/33 spi: stm32_qspi: migrate trace to dev and log macro
In reply to Patrick DelaunayChange debug/pr_* to log_* or dev_* macro and define LOG_CATEGORY.
Remove the "%s:" __func__ header as it is managed by dev macro (dev->name is displayed) or log macro (CONFIG_LOGF_FUNC).
---
drivers/spi/stm32_qspi.c | 46 ++++++++++++++++++++++------------------ 1 file changed, 25 insertions(+), 21 deletions(-)
drivers/spi/stm32_qspi.c +25 -21
@@ -7,6 +7,8 @@* STM32 QSPI driver */ +#define LOG_CATEGORY UCLASS_SPI +#include <common.h> #include <clk.h> #include <dm.h>
@@ -136,7 +138,7 @@ static int _stm32_qspi_wait_for_not_busy(struct stm32_qspi_priv *priv) !(sr &STM32_QSPI_SR_BUSY ), STM32_BUSY_TIMEOUT_US);if (ret) -pr_err ("busy timeout (stat:%#x)\n" , sr); +log_err ("busy timeout (stat:%#x)\n" , sr);return ret; }
@@ -154,9 +156,9 @@ static int _stm32_qspi_wait_cmd(struct stm32_qspi_priv *priv, sr &STM32_QSPI_SR_TCF , STM32_QSPI_CMD_TIMEOUT_US);if (ret) { -pr_err ("cmd timeout (stat:%#x)\n" , sr); +log_err ("cmd timeout (stat:%#x)\n" , sr); }else if (readl (&priv->regs->sr) &STM32_QSPI_SR_TEF ) { -pr_err ("transfer error (stat:%#x)\n" , sr); +log_err ("transfer error (stat:%#x)\n" , sr); ret = -EIO ; }
@@ -198,7 +200,7 @@ static int _stm32_qspi_poll(struct stm32_qspi_priv *priv, sr &STM32_QSPI_SR_FTF , STM32_QSPI_FIFO_TIMEOUT_US);if (ret) { -pr_err ("fifo timeout (len:%d stat:%#x)\n" , len, sr); +log_err ("fifo timeout (len:%d stat:%#x)\n" , len, sr);return ret; }
@@ -246,10 +248,10 @@ static int stm32_qspi_exec_op(struct spi_slave *slave,u8 mode =STM32_QSPI_CCR_IND_WRITE ;int timeout, ret; -debug ("%s: cmd:%#x mode:%d.%d.%d.%d addr:%#llx len:%#x\n" , - __func__, op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, - op->dummy.buswidth, op->data.buswidth, - op->addr.val, op->data.nbytes); +dev_dbg (slave->dev,"cmd:%#x mode:%d.%d.%d.%d addr:%#llx len:%#x\n" , + op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, + op->dummy.buswidth, op->data.buswidth, + op->addr.val, op->data.nbytes); ret =_stm32_qspi_wait_for_not_busy (priv);if (ret)
@@ -320,7 +322,7 @@ abort:writel (STM32_QSPI_FCR_CTCF , &priv->regs->fcr);if (ret || timeout) -pr_err ("%s ret:%d abort timeout:%d\n" , __func__, ret, timeout); +dev_err (slave->dev,"ret:%d abort timeout:%d\n" , ret, timeout);return ret; }
@@ -353,8 +355,8 @@ static int stm32_qspi_probe(struct udevice *bus)if (priv->mm_size >STM32_QSPI_MAX_MMAP_SZ )return -EINVAL ; -debug ("%s: regs=<0x%p> mapped=<0x%p> mapped_size=<0x%lx>\n" , - __func__, priv->regs, priv->mm_base, priv->mm_size); +dev_dbg (bus,"regs=<0x%p> mapped=<0x%p> mapped_size=<0x%lx>\n" , + priv->regs, priv->mm_base, priv->mm_size); ret =clk_get_by_index (bus,0 , &clk);if (ret <0 )
@@ -475,8 +477,8 @@ static int stm32_qspi_set_speed(struct udevice *bus, uint speed)STM32_QSPI_DCR_CSHT_MASK <<STM32_QSPI_DCR_CSHT_SHIFT , csht << STM32_QSPI_DCR_CSHT_SHIFT); -debug ("%s: regs=%p, speed=%d\n" , __func__, priv->regs, - (qspi_clk / (prescaler +1 ))); +dev_dbg (bus,"regs=%p, speed=%d\n" , priv->regs, + (qspi_clk / (prescaler +1 )));return 0 ; }
@@ -485,6 +487,7 @@ static int stm32_qspi_set_mode(struct udevice *bus, uint mode) {struct stm32_qspi_priv *priv =dev_get_priv (bus);int ret; +const char *str_rx, *str_tx; ret =_stm32_qspi_wait_for_not_busy (priv);if (ret)
@@ -500,21 +503,22 @@ static int stm32_qspi_set_mode(struct udevice *bus, uint mode)if (mode &SPI_CS_HIGH )return -ENODEV ; -debug ("%s: regs=%p, mode=%d rx: " , __func__, priv->regs, mode); -if (mode &SPI_RX_QUAD ) -debug ("quad, tx: " ); + str_rx ="quad" ;else if (mode &SPI_RX_DUAL ) -debug ("dual, tx: " ); + str_rx ="dual" ;else -debug ("single, tx: " ); + str_rx ="single" ;if (mode &SPI_TX_QUAD ) -debug ("quad\n" ); + str_tx ="quad" ;else if (mode &SPI_TX_DUAL ) -debug ("dual\n" ); + str_tx ="dual" ;else -debug ("single\n" ); + str_tx ="single" ; + +dev_dbg (bus,"regs=%p, mode=%d rx: %s, tx: %s\n" , + priv->regs, mode, str_rx, str_tx);return 0 ; }
Signature · 1 line
2.17.1
PATCH 25/33 spi: stm32_qspi: migrate trace to dev and log macro
Hi Patrick
Quoted 129 lines · Patrick Delaunay
Change debug/pr_* to log_* or dev_* macro and define
LOG_CATEGORY.Remove the "%s:"
__func__header as it is managed by dev macro (dev->nameis displayed) or log macro (CONFIG_LOGF_FUNC).Signed-off-by Patrick Delaunay <[email protected]>---
drivers/spi/stm32_qspi.c | 46 ++++++++++++++++++++++------------------ 1 file changed, 25 insertions(+), 21 deletions(-)drivers/spi/stm32_qspi.c +20
-20@@ -7,6 +7,8 @@* STM32 QSPI driver */ +#define LOG_CATEGORY UCLASS_SPI +#include <common.h> #include <clk.h> #include <dm.h> @@ -136,7 +138,7 @@ static int _stm32_qspi_wait_for_not_busy(struct stm32_qspi_priv *priv) !(sr &STM32_QSPI_SR_BUSY ), STM32_BUSY_TIMEOUT_US);if (ret) -pr_err ("busy timeout (stat:%#x)\n" , sr); +log_err ("busy timeout (stat:%#x)\n" , sr);return ret; }@@ -154,9 +156,9 @@ static int _stm32_qspi_wait_cmd(struct stm32_qspi_priv *priv, sr &STM32_QSPI_SR_TCF , STM32_QSPI_CMD_TIMEOUT_US);if (ret) { -pr_err ("cmd timeout (stat:%#x)\n" , sr); +log_err ("cmd timeout (stat:%#x)\n" , sr); }else if (readl (&priv->regs->sr) &STM32_QSPI_SR_TEF ) { -pr_err ("transfer error (stat:%#x)\n" , sr); +log_err ("transfer error (stat:%#x)\n" , sr); ret = -EIO ; }@@ -198,7 +200,7 @@ static int _stm32_qspi_poll(struct stm32_qspi_priv *priv, sr &STM32_QSPI_SR_FTF , STM32_QSPI_FIFO_TIMEOUT_US);if (ret) { -pr_err ("fifo timeout (len:%d stat:%#x)\n" , len, sr); +log_err ("fifo timeout (len:%d stat:%#x)\n" , len, sr);return ret; }@@ -246,10 +248,10 @@ static int stm32_qspi_exec_op(struct spi_slave *slave,u8 mode =STM32_QSPI_CCR_IND_WRITE ;int timeout, ret; -debug ("%s: cmd:%#x mode:%d.%d.%d.%d addr:%#llx len:%#x\n" , - __func__, op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, - op->dummy.buswidth, op->data.buswidth, - op->addr.val, op->data.nbytes); +dev_dbg (slave->dev,"cmd:%#x mode:%d.%d.%d.%d addr:%#llx len:%#x\n" , + op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth, + op->dummy.buswidth, op->data.buswidth, + op->addr.val, op->data.nbytes); ret =_stm32_qspi_wait_for_not_busy (priv);if (ret)@@ -320,7 +322,7 @@ abort:writel (STM32_QSPI_FCR_CTCF , &priv->regs->fcr);if (ret || timeout) -pr_err ("%s ret:%d abort timeout:%d\n" , __func__, ret, timeout); +dev_err (slave->dev,"ret:%d abort timeout:%d\n" , ret, timeout);return ret; }@@ -353,8 +355,8 @@ static int stm32_qspi_probe(struct udevice *bus)if (priv->mm_size >STM32_QSPI_MAX_MMAP_SZ )return -EINVAL ; -debug ("%s: regs=<0x%p> mapped=<0x%p> mapped_size=<0x%lx>\n" , - __func__, priv->regs, priv->mm_base, priv->mm_size); +dev_dbg (bus,"regs=<0x%p> mapped=<0x%p> mapped_size=<0x%lx>\n" , + priv->regs, priv->mm_base, priv->mm_size); ret =clk_get_by_index (bus,0 , &clk);if (ret <0 )@@ -475,8 +477,8 @@ static int stm32_qspi_set_speed(struct udevice *bus, uint speed)STM32_QSPI_DCR_CSHT_MASK <<STM32_QSPI_DCR_CSHT_SHIFT , csht << STM32_QSPI_DCR_CSHT_SHIFT); -debug ("%s: regs=%p, speed=%d\n" , __func__, priv->regs, - (qspi_clk / (prescaler +1 ))); +dev_dbg (bus,"regs=%p, speed=%d\n" , priv->regs, + (qspi_clk / (prescaler +1 )));return 0 ; }@@ -485,6 +487,7 @@ static int stm32_qspi_set_mode(struct udevice *bus, uint mode) {struct stm32_qspi_priv *priv =dev_get_priv (bus);int ret; +const char *str_rx, *str_tx; ret =_stm32_qspi_wait_for_not_busy (priv);if (ret)@@ -500,21 +503,22 @@ static int stm32_qspi_set_mode(struct udevice *bus, uint mode)if (mode &SPI_CS_HIGH )return -ENODEV ; -debug ("%s: regs=%p, mode=%d rx: " , __func__, priv->regs, mode); -if (mode &SPI_RX_QUAD ) -debug ("quad, tx: " ); + str_rx ="quad" ;else if (mode &SPI_RX_DUAL ) -debug ("dual, tx: " ); + str_rx ="dual" ;else -debug ("single, tx: " ); + str_rx ="single" ;if (mode &SPI_TX_QUAD ) -debug ("quad\n" ); + str_tx ="quad" ;else if (mode &SPI_TX_DUAL ) -debug ("dual\n" );
drivers/spi/stm32_qspi.c static int stm32_qspi_set_mode(struct udevice *bus, uint mode) · line 524
Quoted 10 lines
drivers/spi/stm32_qspi.c +5
-1+ str_tx ="dual" ; else -debug ("single\n" ); + str_tx ="single" ; + +dev_dbg (bus,"regs=%p, mode=%d rx: %s, tx: %s\n" , + priv->regs, mode, str_rx, str_tx);return 0 ; }
Thanks
PATCH 26/33 mtd: stm32_fmc2: migrate trace to dev and log macro
In reply to Patrick DelaunayChange pr_* to dev_ or log_ macro and define LOG_CATEGORY.
---
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 40 ++++++++++++-------------- 1 file changed, 19 insertions(+), 21 deletions(-)
drivers/mtd/nand/raw/stm32_fmc2_nand.c +19 -21
@@ -4,12 +4,15 @@* Author: Christophe Kerello <[email protected]> */ +#define LOG_CATEGORY UCLASS_MTD +#include <common.h> #include <clk.h> #include <dm.h> #include <log.h> #include <nand.h> #include <reset.h> +#include <dm/device_compat.h> #include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/delay.h>
@@ -324,7 +327,7 @@ static int stm32_fmc2_nfc_ham_calculate(struct mtd_info *mtd, const u8 *data, ret =readl_poll_timeout (nfc->io_base +FMC2_SR , sr, sr &FMC2_SR_NWRF ,FMC2_TIMEOUT_5S );if (ret <0 ) { -pr_err ("Ham timeout\n" ); +log_err ("Ham timeout\n" );return ret; }
@@ -409,7 +412,7 @@ static int stm32_fmc2_nfc_bch_calculate(struct mtd_info *mtd, const u8 *data, ret =readl_poll_timeout (nfc->io_base +FMC2_BCHISR , bchisr, bchisr &FMC2_BCHISR_EPBRF ,FMC2_TIMEOUT_5S );if (ret <0 ) { -pr_err ("Bch timeout\n" ); +log_err ("Bch timeout\n" );return ret; }
@@ -457,7 +460,7 @@ static int stm32_fmc2_nfc_bch_correct(struct mtd_info *mtd, u8 *dat, ret =readl_poll_timeout (nfc->io_base +FMC2_BCHISR , bchisr, bchisr &FMC2_BCHISR_DERF ,FMC2_TIMEOUT_5S );if (ret <0 ) { -pr_err ("Bch timeout\n" ); +log_err ("Bch timeout\n" );return ret; }
@@ -795,26 +798,24 @@ static int stm32_fmc2_nfc_parse_child(struct stm32_fmc2_nfc *nfc, ofnode node) nand->ncs /=sizeof (u32);if (!nand->ncs) { -pr_err ("Invalid reg property size\n" ); +log_err ("Invalid reg property size\n" );return -EINVAL ; } ret =ofnode_read_u32_array (node,"reg" , cs, nand->ncs);if (ret <0 ) { -pr_err ("Could not retrieve reg property\n" ); +log_err ("Could not retrieve reg property\n" );return -EINVAL ; }for (i =0 ; i < nand->ncs; i++) {if (cs[i] >=FMC2_MAX_CE ) { -pr_err ("Invalid reg value: %d\n" , - nand->cs_used[i]); +log_err ("Invalid reg value: %d\n" , nand->cs_used[i]);return -EINVAL ; }if (nfc->cs_assigned &BIT (cs[i])) { -pr_err ("Cs already assigned: %d\n" , - nand->cs_used[i]); +log_err ("Cs already assigned: %d\n" , nand->cs_used[i]);return -EINVAL ; }
@@ -837,12 +838,12 @@ static int stm32_fmc2_nfc_parse_dt(struct udevice *dev, nchips++;if (!nchips) { -pr_err ("NAND chip not defined\n" ); +log_err ("NAND chip not defined\n" );return -EINVAL ; }if (nchips >1 ) { -pr_err ("Too many NAND chips defined\n" ); +log_err ("Too many NAND chips defined\n" );return -EINVAL ; }
@@ -918,24 +919,21 @@ static int stm32_fmc2_nfc_probe(struct udevice *dev) addr =dev_read_addr_index (dev, mem_region);if (addr ==FDT_ADDR_T_NONE ) { -pr_err ("Resource data_base not found for cs%d" , - chip_cs); +dev_err (dev,"Resource data_base not found for cs%d" , chip_cs);return ret; } nfc->data_base[chip_cs] = addr; addr =dev_read_addr_index (dev, mem_region +1 );if (addr ==FDT_ADDR_T_NONE ) { -pr_err ("Resource cmd_base not found for cs%d" , - chip_cs); +dev_err (dev,"Resource cmd_base not found for cs%d" , chip_cs);return ret; } nfc->cmd_base[chip_cs] = addr; addr =dev_read_addr_index (dev, mem_region +2 );if (addr ==FDT_ADDR_T_NONE ) { -pr_err ("Resource addr_base not found for cs%d" , - chip_cs); +dev_err (dev,"Resource addr_base not found for cs%d" , chip_cs);return ret; } nfc->addr_base[chip_cs] = addr;
@@ -985,14 +983,14 @@ static int stm32_fmc2_nfc_probe(struct udevice *dev)* ECC sector size = 512 */ if (chip->ecc.mode !=NAND_ECC_HW ) { -pr_err ("Nand_ecc_mode is not well defined in the DT\n" ); +dev_err (dev,"Nand_ecc_mode is not well defined in the DT\n" );return -EINVAL ; } ret =nand_check_ecc_caps (chip, &stm32_fmc2_nfc_ecc_caps, mtd->oobsize -FMC2_BBM_LEN );if (ret) { -pr_err ("No valid ECC settings set\n" ); +dev_err (dev,"No valid ECC settings set\n" );return ret; }
@@ -1045,6 +1043,6 @@ void board_nand_init(void)DM_GET_DRIVER (stm32_fmc2_nfc), &dev);if (ret && ret != -ENODEV ) -pr_err ("Failed to initialize STM32 FMC2 NFC controller. (error %d)\n" , - ret); +log_err ("Failed to initialize STM32 FMC2 NFC controller. (error %d)\n" , + ret); }
Signature · 1 line
2.17.1
PATCH 26/33 mtd: stm32_fmc2: migrate trace to dev and log macro
Hi Patrick
Quoted 147 lines · Patrick Delaunay
Change pr_* to
dev_orlog_macro and defineLOG_CATEGORY.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/mtd/nand/raw/stm32_fmc2_nand.c | 40 ++++++++++++-------------- 1 file changed, 19 insertions(+), 21 deletions(-)drivers/mtd/nand/raw/stm32_fmc2_nand.c +17
-19@@ -4,12 +4,15 @@* Author: Christophe Kerello <[email protected]> */ +#define LOG_CATEGORY UCLASS_MTD +#include <common.h> #include <clk.h> #include <dm.h> #include <log.h> #include <nand.h> #include <reset.h> +#include <dm/device_compat.h> #include <linux/bitfield.h> #include <linux/bitops.h> #include <linux/delay.h> @@ -324,7 +327,7 @@ static int stm32_fmc2_nfc_ham_calculate(struct mtd_info *mtd, const u8 *data, ret =readl_poll_timeout (nfc->io_base +FMC2_SR , sr, sr &FMC2_SR_NWRF ,FMC2_TIMEOUT_5S );if (ret <0 ) { -pr_err ("Ham timeout\n" ); +log_err ("Ham timeout\n" );return ret; }@@ -409,7 +412,7 @@ static int stm32_fmc2_nfc_bch_calculate(struct mtd_info *mtd, const u8 *data, ret =readl_poll_timeout (nfc->io_base +FMC2_BCHISR , bchisr, bchisr &FMC2_BCHISR_EPBRF ,FMC2_TIMEOUT_5S );if (ret <0 ) { -pr_err ("Bch timeout\n" ); +log_err ("Bch timeout\n" );return ret; }@@ -457,7 +460,7 @@ static int stm32_fmc2_nfc_bch_correct(struct mtd_info *mtd, u8 *dat, ret =readl_poll_timeout (nfc->io_base +FMC2_BCHISR , bchisr, bchisr &FMC2_BCHISR_DERF ,FMC2_TIMEOUT_5S );if (ret <0 ) { -pr_err ("Bch timeout\n" ); +log_err ("Bch timeout\n" );return ret; }@@ -795,26 +798,24 @@ static int stm32_fmc2_nfc_parse_child(struct stm32_fmc2_nfc *nfc, ofnode node) nand->ncs /=sizeof (u32);if (!nand->ncs) { -pr_err ("Invalid reg property size\n" ); +log_err ("Invalid reg property size\n" );return -EINVAL ; } ret =ofnode_read_u32_array (node,"reg" , cs, nand->ncs);if (ret <0 ) { -pr_err ("Could not retrieve reg property\n" ); +log_err ("Could not retrieve reg property\n" );return -EINVAL ; }for (i =0 ; i < nand->ncs; i++) {if (cs[i] >=FMC2_MAX_CE ) { -pr_err ("Invalid reg value: %d\n" , - nand->cs_used[i]); +log_err ("Invalid reg value: %d\n" , nand->cs_used[i]);return -EINVAL ; }if (nfc->cs_assigned &BIT (cs[i])) { -pr_err ("Cs already assigned: %d\n" , - nand->cs_used[i]); +log_err ("Cs already assigned: %d\n" , nand->cs_used[i]);return -EINVAL ; }@@ -837,12 +838,12 @@ static int stm32_fmc2_nfc_parse_dt(struct udevice *dev, nchips++;if (!nchips) { -pr_err ("NAND chip not defined\n" ); +log_err ("NAND chip not defined\n" );return -EINVAL ; }if (nchips >1 ) { -pr_err ("Too many NAND chips defined\n" ); +log_err ("Too many NAND chips defined\n" );return -EINVAL ; }@@ -918,24 +919,21 @@ static int stm32_fmc2_nfc_probe(struct udevice *dev) addr =dev_read_addr_index (dev, mem_region);if (addr ==FDT_ADDR_T_NONE ) { -pr_err ("Resource data_base not found for cs%d" , - chip_cs); +dev_err (dev,"Resource data_base not found for cs%d" , chip_cs);return ret; } nfc->data_base[chip_cs] = addr; addr =dev_read_addr_index (dev, mem_region +1 );if (addr ==FDT_ADDR_T_NONE ) { -pr_err ("Resource cmd_base not found for cs%d" , - chip_cs); +dev_err (dev,"Resource cmd_base not found for cs%d" , chip_cs);return ret; } nfc->cmd_base[chip_cs] = addr; addr =dev_read_addr_index (dev, mem_region +2 );if (addr ==FDT_ADDR_T_NONE ) { -pr_err ("Resource addr_base not found for cs%d" , - chip_cs); +dev_err (dev,"Resource addr_base not found for cs%d" , chip_cs);return ret; } nfc->addr_base[chip_cs] = addr;@@ -985,14 +983,14 @@ static int stm32_fmc2_nfc_probe(struct udevice *dev)* ECC sector size = 512 */ if (chip->ecc.mode !=NAND_ECC_HW ) { -pr_err ("Nand_ecc_mode is not well defined in the DT\n" ); +dev_err (dev,"Nand_ecc_mode is not well defined in the DT\n" );return -EINVAL ; } ret =nand_check_ecc_caps (chip, &stm32_fmc2_nfc_ecc_caps, mtd->oobsize -FMC2_BBM_LEN );if (ret) { -pr_err ("No valid ECC settings set\n" ); +dev_err (dev,"No valid ECC settings set\n" );return ret; }
drivers/mtd/nand/raw/stm32_fmc2_nand.c void board_nand_init(void) · line 1048
Quoted 8 lines
drivers/mtd/nand/raw/stm32_fmc2_nand.c +2
-2@@ -1045,6 +1043,6 @@ void board_nand_init(void)DM_GET_DRIVER (stm32_fmc2_nfc), &dev);if (ret && ret != -ENODEV ) -pr_err ("Failed to initialize STM32 FMC2 NFC controller. (error %d)\n" , - ret); +log_err ("Failed to initialize STM32 FMC2 NFC controller. (error %d)\n" , + ret); }
Thanks
PATCH 27/33 memory: stm32-fmc2: migrate trace to dev and log macro
In reply to Patrick DelaunayChange pr_* to dev_ or log_ macro and define LOG_CATEGORY.
---
drivers/memory/stm32-fmc2-ebi.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-)
drivers/memory/stm32-fmc2-ebi.c +16 -14
@@ -3,10 +3,13 @@* Copyright (C) STMicroelectronics 2020 */ +#define LOG_CATEGORY UCLASS_NOP +#include <common.h> #include <clk.h> #include <dm.h> #include <reset.h> +#include <dm/device_compat.h> #include <linux/bitfield.h> #include <linux/err.h> #include <linux/iopoll.h>
@@ -860,7 +863,7 @@ static int stm32_fmc2_ebi_parse_prop(struct stm32_fmc2_ebi *ebi,u32 setup =0 ;if (!prop->set) { -pr_err ("property %s is not well defined\n" , prop->name); +log_err ("property %s is not well defined\n" , prop->name);return -EINVAL ; }
@@ -873,8 +876,8 @@ static int stm32_fmc2_ebi_parse_prop(struct stm32_fmc2_ebi *ebi, bprop =ofnode_read_bool (node, prop->name);if (prop->mprop && !bprop) { -pr_err ("mandatory property %s not defined in the device tree\n" , - prop->name); +log_err ("mandatory property %s not defined in the device tree\n" , + prop->name);return -EINVAL ; }
@@ -886,8 +889,8 @@ static int stm32_fmc2_ebi_parse_prop(struct stm32_fmc2_ebi *ebi, ret =ofnode_read_u32 (node, prop->name, &val);if (prop->mprop && ret) { -pr_err ("mandatory property %s not defined in the device tree\n" , - prop->name); +log_err ("mandatory property %s not defined in the device tree\n" , + prop->name);return ret; }
@@ -949,8 +952,8 @@ static int stm32_fmc2_ebi_setup_cs(struct stm32_fmc2_ebi *ebi, ret =stm32_fmc2_ebi_parse_prop (ebi, node, p, cs);if (ret) { -pr_err ("property %s could not be set: %d\n" , - p->name, ret); +log_err ("property %s could not be set: %d\n" , + p->name, ret);return ret; } }
@@ -971,25 +974,24 @@ static int stm32_fmc2_ebi_parse_dt(struct udevice *dev,dev_for_each_subnode (child, dev) { ret =ofnode_read_u32 (child,"reg" , &bank);if (ret) { -pr_err ("could not retrieve reg property: %d\n" , ret); +dev_err (dev,"could not retrieve reg property: %d\n" , ret);return ret; }if (bank >=FMC2_MAX_BANKS ) { -pr_err ("invalid reg value: %d\n" , bank); +dev_err (dev,"invalid reg value: %d\n" , bank);return -EINVAL ; }if (ebi->bank_assigned &BIT (bank)) { -pr_err ("bank already assigned: %d\n" , bank); +dev_err (dev,"bank already assigned: %d\n" , bank);return -EINVAL ; }if (bank <FMC2_MAX_EBI_CE ) { ret =stm32_fmc2_ebi_setup_cs (ebi, child, bank);if (ret) { -pr_err ("setup chip select %d failed: %d\n" , - bank, ret); +dev_err (dev,"setup chip select %d failed: %d\n" , bank, ret);return ret; } }
@@ -999,12 +1001,12 @@ static int stm32_fmc2_ebi_parse_dt(struct udevice *dev, }if (!child_found) { -pr_warn ("no subnodes found, disable the driver.\n" ); +dev_warn (dev,"no subnodes found, disable the driver.\n" );return -ENODEV ; }if (stm32_fmc2_ebi_nwait_used_by_ctrls (ebi)) { -pr_err ("NWAIT signal connected to EBI and NAND controllers\n" ); +dev_err (dev,"NWAIT signal connected to EBI and NAND controllers\n" );return -EINVAL ; }
Signature · 1 line
2.17.1
PATCH 27/33 memory: stm32-fmc2: migrate trace to dev and log macro
Hi Patrick
Quoted 103 lines · Patrick Delaunay
Change pr_* to
dev_orlog_macro and defineLOG_CATEGORY.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/memory/stm32-fmc2-ebi.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-)drivers/memory/stm32-fmc2-ebi.c +14
-13@@ -3,10 +3,13 @@* Copyright (C) STMicroelectronics 2020 */ +#define LOG_CATEGORY UCLASS_NOP +#include <common.h> #include <clk.h> #include <dm.h> #include <reset.h> +#include <dm/device_compat.h> #include <linux/bitfield.h> #include <linux/err.h> #include <linux/iopoll.h> @@ -860,7 +863,7 @@ static int stm32_fmc2_ebi_parse_prop(struct stm32_fmc2_ebi *ebi,u32 setup =0 ;if (!prop->set) { -pr_err ("property %s is not well defined\n" , prop->name); +log_err ("property %s is not well defined\n" , prop->name);return -EINVAL ; }@@ -873,8 +876,8 @@ static int stm32_fmc2_ebi_parse_prop(struct stm32_fmc2_ebi *ebi, bprop =ofnode_read_bool (node, prop->name);if (prop->mprop && !bprop) { -pr_err ("mandatory property %s not defined in the device tree\n" , - prop->name); +log_err ("mandatory property %s not defined in the device tree\n" , + prop->name);return -EINVAL ; }@@ -886,8 +889,8 @@ static int stm32_fmc2_ebi_parse_prop(struct stm32_fmc2_ebi *ebi, ret =ofnode_read_u32 (node, prop->name, &val);if (prop->mprop && ret) { -pr_err ("mandatory property %s not defined in the device tree\n" , - prop->name); +log_err ("mandatory property %s not defined in the device tree\n" , + prop->name);return ret; }@@ -949,8 +952,8 @@ static int stm32_fmc2_ebi_setup_cs(struct stm32_fmc2_ebi *ebi, ret =stm32_fmc2_ebi_parse_prop (ebi, node, p, cs);if (ret) { -pr_err ("property %s could not be set: %d\n" , - p->name, ret); +log_err ("property %s could not be set: %d\n" , + p->name, ret);return ret; } }@@ -971,25 +974,24 @@ static int stm32_fmc2_ebi_parse_dt(struct udevice *dev,dev_for_each_subnode (child, dev) { ret =ofnode_read_u32 (child,"reg" , &bank);if (ret) { -pr_err ("could not retrieve reg property: %d\n" , ret); +dev_err (dev,"could not retrieve reg property: %d\n" , ret);return ret; }if (bank >=FMC2_MAX_BANKS ) { -pr_err ("invalid reg value: %d\n" , bank); +dev_err (dev,"invalid reg value: %d\n" , bank);return -EINVAL ; }if (ebi->bank_assigned &BIT (bank)) { -pr_err ("bank already assigned: %d\n" , bank); +dev_err (dev,"bank already assigned: %d\n" , bank);return -EINVAL ; }if (bank <FMC2_MAX_EBI_CE ) { ret =stm32_fmc2_ebi_setup_cs (ebi, child, bank);if (ret) { -pr_err ("setup chip select %d failed: %d\n" , - bank, ret); +dev_err (dev,"setup chip select %d failed: %d\n" , bank, ret);return ret; } }@@ -999,12 +1001,12 @@ static int stm32_fmc2_ebi_parse_dt(struct udevice *dev, }if (!child_found) { -pr_warn ("no subnodes found, disable the driver.\n" );
drivers/memory/stm32-fmc2-ebi.c static int stm32_fmc2_ebi_parse_dt(struct udevice *dev, · line 1012
Quoted 10 lines
drivers/memory/stm32-fmc2-ebi.c +2
-1+dev_warn (dev,"no subnodes found, disable the driver.\n" );return -ENODEV ; }if (stm32_fmc2_ebi_nwait_used_by_ctrls (ebi)) { -pr_err ("NWAIT signal connected to EBI and NAND controllers\n" ); +dev_err (dev,"NWAIT signal connected to EBI and NAND controllers\n" );return -EINVAL ; }
Thanks
PATCH 28/33 serial: stm32: define LOG_CATEGORY
In reply to Patrick DelaunayDefine LOG_CATEGORY to allow filtering with log command.
---
drivers/serial/serial_stm32.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/serial/serial_stm32.c +3 -0
@@ -4,6 +4,8 @@* Author(s): Vikas Manocha, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_SERIAL +#include <common.h> #include <clk.h> #include <dm.h>
@@ -13,6 +15,7 @@#include <watchdog.h> #include <asm/io.h> #include <asm/arch/stm32.h> +#include <dm/device_compat.h> #include <linux/bitops.h> #include <linux/delay.h> #include "serial_stm32.h"
Signature · 1 line
2.17.1
PATCH 28/33 serial: stm32: define LOG_CATEGORY
Hi Patrick
Quoted 22 lines · Patrick Delaunay
Define
LOG_CATEGORYto allow filtering with log command.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/serial/serial_stm32.c | 3 +++ 1 file changed, 3 insertions(+)drivers/serial/serial_stm32.c +2
-0@@ -4,6 +4,8 @@* Author(s): Vikas Manocha, <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_SERIAL +#include <common.h> #include <clk.h> #include <dm.h>
drivers/serial/serial_stm32.c line 21
Quoted 7 lines
drivers/serial/serial_stm32.c +1
-0@@ -13,6 +15,7 @@#include <watchdog.h> #include <asm/io.h> #include <asm/arch/stm32.h> +#include <dm/device_compat.h> #include <linux/bitops.h> #include <linux/delay.h> #include "serial_stm32.h"
Thanks
PATCH 29/33 video: stm32_ltdc: migrate trace to dev and log macro
In reply to Patrick DelaunayChange pr_* to dev_ or log_ macro and define LOG_CATEGORY.
---
drivers/video/stm32/stm32_ltdc.c | 33 +++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-)
drivers/video/stm32/stm32_ltdc.c +18 -15
@@ -5,6 +5,8 @@* Yannick Fertre <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_VIDEO +#include <common.h> #include <clk.h> #include <display.h>
@@ -176,13 +178,13 @@ static u32 stm32_ltdc_get_pixel_format(enum video_log2_bpp l2bpp)case VIDEO_BPP2 :case VIDEO_BPP4 :default : -pr_warn ("%s: warning %dbpp not supported yet, %dbpp instead\n" , - __func__,VNBITS (l2bpp),VNBITS (VIDEO_BPP16 )); +log_warning ("warning %dbpp not supported yet, %dbpp instead\n" , +VNBITS (l2bpp),VNBITS (VIDEO_BPP16 )); pf =PF_RGB565 ;break ; } -debug ("%s: %d bpp -> ltdc pf %d\n" , __func__,VNBITS (l2bpp), pf); +log_debug ("%d bpp -> ltdc pf %d\n" ,VNBITS (l2bpp), pf);return (u32 )pf; }
@@ -249,7 +251,7 @@ static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv,/* Signal polarities */ val =0 ; -debug ("%s: timing->flags 0x%08x\n" , __func__, timings->flags); +log_debug ("timing->flags 0x%08x\n" , timings->flags);if (timings->flags &DISPLAY_FLAGS_HSYNC_HIGH ) val |=GCR_HSPOL ;if (timings->flags &DISPLAY_FLAGS_VSYNC_HIGH )
@@ -379,8 +381,8 @@ static int stm32_ltdc_probe(struct udevice *dev)dev_warn (dev,"fail to set pixel clock %d hz\n" , timings.pixelclock.typ); -debug ("%s: Set pixel clock req %d hz get %ld hz\n" , __func__, - timings.pixelclock.typ,clk_get_rate (&pclk)); +dev_dbg (dev,"Set pixel clock req %d hz get %ld hz\n" , + timings.pixelclock.typ,clk_get_rate (&pclk)); ret =reset_get_by_index (dev,0 , &rst);if (ret) {
@@ -394,12 +396,13 @@ static int stm32_ltdc_probe(struct udevice *dev)if (IS_ENABLED (CONFIG_VIDEO_BRIDGE )) { ret =uclass_get_device (UCLASS_VIDEO_BRIDGE ,0 , &bridge);if (ret) -debug ("No video bridge, or no backlight on bridge\n" ); +dev_dbg (dev, +"No video bridge, or no backlight on bridge\n" );if (bridge) { ret =video_bridge_attach (bridge);if (ret) { -dev_err (dev,"fail to attach bridge\n" ); +dev_err (bridge,"fail to attach bridge\n" );return ret; } }
@@ -414,12 +417,12 @@ static int stm32_ltdc_probe(struct udevice *dev) priv->crop_h = timings.vactive.typ; priv->alpha =0xFF ; -debug ("%s: %dx%d %dbpp frame buffer at 0x%lx\n" , __func__, - timings.hactive.typ, timings.vactive.typ, -VNBITS (priv->l2bpp), uc_plat->base); -debug ("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n" , __func__, - priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h, - priv->bg_col_argb, priv->alpha); +dev_dbg (dev,"%dx%d %dbpp frame buffer at 0x%lx\n" , + timings.hactive.typ, timings.vactive.typ, +VNBITS (priv->l2bpp), uc_plat->base); +dev_dbg (dev,"crop %d,%d %dx%d bg 0x%08x alpha %d\n" , + priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h, + priv->bg_col_argb, priv->alpha);/* Configure & start LTDC */ stm32_ltdc_set_mode (priv, &timings);
@@ -457,7 +460,7 @@ static int stm32_ltdc_bind(struct udevice *dev) uc_plat->size =CONFIG_VIDEO_STM32_MAX_XRES *CONFIG_VIDEO_STM32_MAX_YRES * (CONFIG_VIDEO_STM32_MAX_BPP >>3 ); -debug ("%s: frame buffer max size %d bytes\n" , __func__, uc_plat->size); +dev_dbg (dev,"frame buffer max size %d bytes\n" , uc_plat->size);return 0 ; }
Signature · 1 line
2.17.1
PATCH 29/33 video: stm32_ltdc: migrate trace to dev and log macro
Hi Patrick
Quoted 94 lines · Patrick Delaunay
Change pr_* to
dev_orlog_macro and defineLOG_CATEGORY.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/video/stm32/stm32_ltdc.c | 33 +++++++++++++++++--------------- 1 file changed, 18 insertions(+), 15 deletions(-)drivers/video/stm32/stm32_ltdc.c +17
-14@@ -5,6 +5,8 @@* Yannick Fertre <[email protected]> for STMicroelectronics. */ +#define LOG_CATEGORY UCLASS_VIDEO +#include <common.h> #include <clk.h> #include <display.h> @@ -176,13 +178,13 @@ static u32 stm32_ltdc_get_pixel_format(enum video_log2_bpp l2bpp)case VIDEO_BPP2 :case VIDEO_BPP4 :default : -pr_warn ("%s: warning %dbpp not supported yet, %dbpp instead\n" , - __func__,VNBITS (l2bpp),VNBITS (VIDEO_BPP16 )); +log_warning ("warning %dbpp not supported yet, %dbpp instead\n" , +VNBITS (l2bpp),VNBITS (VIDEO_BPP16 )); pf =PF_RGB565 ;break ; } -debug ("%s: %d bpp -> ltdc pf %d\n" , __func__,VNBITS (l2bpp), pf); +log_debug ("%d bpp -> ltdc pf %d\n" ,VNBITS (l2bpp), pf);return (u32 )pf; }@@ -249,7 +251,7 @@ static void stm32_ltdc_set_mode(struct stm32_ltdc_priv *priv,/* Signal polarities */ val =0 ; -debug ("%s: timing->flags 0x%08x\n" , __func__, timings->flags); +log_debug ("timing->flags 0x%08x\n" , timings->flags);if (timings->flags &DISPLAY_FLAGS_HSYNC_HIGH ) val |=GCR_HSPOL ;if (timings->flags &DISPLAY_FLAGS_VSYNC_HIGH )@@ -379,8 +381,8 @@ static int stm32_ltdc_probe(struct udevice *dev)dev_warn (dev,"fail to set pixel clock %d hz\n" , timings.pixelclock.typ); -debug ("%s: Set pixel clock req %d hz get %ld hz\n" , __func__, - timings.pixelclock.typ,clk_get_rate (&pclk)); +dev_dbg (dev,"Set pixel clock req %d hz get %ld hz\n" , + timings.pixelclock.typ,clk_get_rate (&pclk)); ret =reset_get_by_index (dev,0 , &rst);if (ret) {@@ -394,12 +396,13 @@ static int stm32_ltdc_probe(struct udevice *dev)if (IS_ENABLED (CONFIG_VIDEO_BRIDGE )) { ret =uclass_get_device (UCLASS_VIDEO_BRIDGE ,0 , &bridge);if (ret) -debug ("No video bridge, or no backlight on bridge\n" ); +dev_dbg (dev, +"No video bridge, or no backlight on bridge\n" );if (bridge) { ret =video_bridge_attach (bridge);if (ret) { -dev_err (dev,"fail to attach bridge\n" ); +dev_err (bridge,"fail to attach bridge\n" );return ret; } }@@ -414,12 +417,12 @@ static int stm32_ltdc_probe(struct udevice *dev) priv->crop_h = timings.vactive.typ; priv->alpha =0xFF ; -debug ("%s: %dx%d %dbpp frame buffer at 0x%lx\n" , __func__, - timings.hactive.typ, timings.vactive.typ, -VNBITS (priv->l2bpp), uc_plat->base); -debug ("%s: crop %d,%d %dx%d bg 0x%08x alpha %d\n" , __func__, - priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h, - priv->bg_col_argb, priv->alpha); +dev_dbg (dev,"%dx%d %dbpp frame buffer at 0x%lx\n" , + timings.hactive.typ, timings.vactive.typ, +VNBITS (priv->l2bpp), uc_plat->base); +dev_dbg (dev,"crop %d,%d %dx%d bg 0x%08x alpha %d\n" , + priv->crop_x, priv->crop_y, priv->crop_w, priv->crop_h, + priv->bg_col_argb, priv->alpha);/* Configure & start LTDC */ stm32_ltdc_set_mode (priv, &timings);
drivers/video/stm32/stm32_ltdc.c static int stm32_ltdc_bind(struct udevice *dev) · line 466
Quoted 8 lines
drivers/video/stm32/stm32_ltdc.c +1
-1@@ -457,7 +460,7 @@ static int stm32_ltdc_bind(struct udevice *dev) uc_plat->size =CONFIG_VIDEO_STM32_MAX_XRES *CONFIG_VIDEO_STM32_MAX_YRES * (CONFIG_VIDEO_STM32_MAX_BPP >>3 ); -debug ("%s: frame buffer max size %d bytes\n" , __func__, uc_plat->size); +dev_dbg (dev,"frame buffer max size %d bytes\n" , uc_plat->size);return 0 ; }
Thanks
PATCH 30/33 video: stm32_dsi: migrate trace to dev and log macro
In reply to Patrick DelaunayChange pr_* to dev_ or log_ macro and define LOG_CATEGORY.
---
drivers/video/stm32/stm32_dsi.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)
drivers/video/stm32/stm32_dsi.c +10 -8
@@ -8,6 +8,8 @@* drivers/gpu/drm/stm/dw_mipi_dsi-stm.c. */ +#define LOG_CATEGORY UCLASS_VIDEO_BRIDGE +#include <common.h> #include <clk.h> #include <dm.h>
@@ -133,7 +135,7 @@ static enum dsi_color dsi_color_from_mipi(u32 fmt)case MIPI_DSI_FMT_RGB565 :return DSI_RGB565_CONF1 ;default : -pr_err ("MIPI color invalid, so we use rgb888\n" ); +log_err ("MIPI color invalid, so we use rgb888\n" ); }return DSI_RGB888 ; }
@@ -213,14 +215,14 @@ static int dsi_phy_init(void *priv_data)u32 val;int ret; -debug ("Initialize DSI physical layer\n" ); +dev_dbg (dev,"Initialize DSI physical layer\n" );/* Enable the regulator */ dsi_set (dsi,DSI_WRPCR ,WRPCR_REGEN |WRPCR_BGREN ); ret =readl_poll_timeout (dsi->base +DSI_WISR , val, val &WISR_RRS ,TIMEOUT_US );if (ret) { -debug ("!TIMEOUT! waiting REGU\n" ); +dev_dbg (dev,"!TIMEOUT! waiting REGU\n" );return ret; }
@@ -229,7 +231,7 @@ static int dsi_phy_init(void *priv_data) ret =readl_poll_timeout (dsi->base +DSI_WISR , val, val &WISR_PLLLS ,TIMEOUT_US );if (ret) { -debug ("!TIMEOUT! waiting PLL\n" ); +dev_dbg (dev,"!TIMEOUT! waiting PLL\n" );return ret; }
@@ -242,8 +244,8 @@ static void dsi_phy_post_set_mode(void *priv_data, unsigned long mode_flags)struct udevice *dev = device->dev;struct stm32_dsi_priv *dsi =dev_get_priv (dev); -debug ("Set mode %p enable %ld\n" , dsi, - mode_flags &MIPI_DSI_MODE_VIDEO ); +dev_dbg (dev,"Set mode %p enable %ld\n" , dsi, + mode_flags &MIPI_DSI_MODE_VIDEO );if (!dsi)return ;
@@ -325,8 +327,8 @@ static int dsi_get_lane_mbps(void *priv_data, struct display_timing *timings, *lane_mbps = pll_out_khz /1000 ; -debug ("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n" , - pll_in_khz, pll_out_khz, *lane_mbps); +dev_dbg (dev,"pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n" , + pll_in_khz, pll_out_khz, *lane_mbps);return 0 ; }
Signature · 1 line
2.17.1
PATCH 30/33 video: stm32_dsi: migrate trace to dev and log macro
Quoted 69 lines · Patrick Delaunay
Change pr_* to
dev_orlog_macro and defineLOG_CATEGORY.Signed-off-by Patrick Delaunay <[email protected]>---
drivers/video/stm32/stm32_dsi.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)drivers/video/stm32/stm32_dsi.c +8
-6@@ -8,6 +8,8 @@* drivers/gpu/drm/stm/dw_mipi_dsi-stm.c. */ +#define LOG_CATEGORY UCLASS_VIDEO_BRIDGE +#include <common.h> #include <clk.h> #include <dm.h> @@ -133,7 +135,7 @@ static enum dsi_color dsi_color_from_mipi(u32 fmt)case MIPI_DSI_FMT_RGB565 :return DSI_RGB565_CONF1 ;default : -pr_err ("MIPI color invalid, so we use rgb888\n" ); +log_err ("MIPI color invalid, so we use rgb888\n" ); }return DSI_RGB888 ; }@@ -213,14 +215,14 @@ static int dsi_phy_init(void *priv_data)u32 val;int ret; -debug ("Initialize DSI physical layer\n" ); +dev_dbg (dev,"Initialize DSI physical layer\n" );/* Enable the regulator */ dsi_set (dsi,DSI_WRPCR ,WRPCR_REGEN |WRPCR_BGREN ); ret =readl_poll_timeout (dsi->base +DSI_WISR , val, val &WISR_RRS ,TIMEOUT_US );if (ret) { -debug ("!TIMEOUT! waiting REGU\n" ); +dev_dbg (dev,"!TIMEOUT! waiting REGU\n" );return ret; }@@ -229,7 +231,7 @@ static int dsi_phy_init(void *priv_data) ret =readl_poll_timeout (dsi->base +DSI_WISR , val, val &WISR_PLLLS ,TIMEOUT_US );if (ret) { -debug ("!TIMEOUT! waiting PLL\n" ); +dev_dbg (dev,"!TIMEOUT! waiting PLL\n" );return ret; }@@ -242,8 +244,8 @@ static void dsi_phy_post_set_mode(void *priv_data, unsigned long mode_flags)struct udevice *dev = device->dev;struct stm32_dsi_priv *dsi =dev_get_priv (dev); -debug ("Set mode %p enable %ld\n" , dsi, - mode_flags &MIPI_DSI_MODE_VIDEO ); +dev_dbg (dev,"Set mode %p enable %ld\n" , dsi, + mode_flags &MIPI_DSI_MODE_VIDEO );if (!dsi)return ;
drivers/video/stm32/stm32_dsi.c static int dsi_get_lane_mbps(void *priv_data, struct display_timing *timings, · line 334
Quoted 10 lines
drivers/video/stm32/stm32_dsi.c +2
-2@@ -325,8 +327,8 @@ static int dsi_get_lane_mbps(void *priv_data, struct display_timing *timings, *lane_mbps = pll_out_khz /1000 ; -debug ("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n" , - pll_in_khz, pll_out_khz, *lane_mbps); +dev_dbg (dev,"pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n" , + pll_in_khz, pll_out_khz, *lane_mbps);return 0 ; }
Hi Patrick,
and many thanks for your patch.
Philippe :-)
PATCH 31/33 board: st: stm32mp1: migrate trace to dev and log macro
In reply to Patrick DelaunayChange pr_* to dev_ or log_ macro and define LOG_CATEGORY.
---
board/st/stm32mp1/stm32mp1.c | 134 +++++++++++++++++------------------ 1 file changed, 65 insertions(+), 69 deletions(-)
board/st/stm32mp1/stm32mp1.c +65 -69
@@ -2,6 +2,9 @@/* * Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ + +#define LOG_CATEGORY LOGC_BOARD +#include <common.h> #include <adc.h> #include <bootm.h>
@@ -106,12 +109,11 @@ int checkboard(void)else mode ="basic" ; -printf ("Board: stm32mp1 in %s mode" , mode); fdt_compat =fdt_getprop (gd->fdt_blob,0 ,"compatible" , &fdt_compat_len); -if (fdt_compat && fdt_compat_len) -printf (" (%s)" , fdt_compat); -puts ("\n" ); + +log_info ("Board: stm32mp1 in %s mode (%s)\n" , mode, + fdt_compat && fdt_compat_len ? fdt_compat :"" );/* display the STMicroelectronics board identification */ if (CONFIG_IS_ENABLED (CMD_STBOARD )) {
@@ -122,12 +124,12 @@ int checkboard(void) ret =misc_read (dev,STM32_BSEC_SHADOW (BSEC_OTP_BOARD ), &otp,sizeof (otp));if (ret >0 && otp) -printf ("Board: MB%04x Var%d.%d Rev.%c-%02d\n" , - otp >>16 , - (otp >>12 ) &0xF , - (otp >>4 ) &0xF , - ((otp >>8 ) &0xF ) -1 +'A' , - otp &0xF ); +log_info ("Board: MB%04x Var%d.%d Rev.%c-%02d\n" , + otp >>16 , + (otp >>12 ) &0xF , + (otp >>4 ) &0xF , + ((otp >>8 ) &0xF ) -1 +'A' , + otp &0xF ); }return 0 ;
@@ -144,17 +146,16 @@ static void board_key_check(void) node =ofnode_path ("/config" );if (!ofnode_valid (node)) { -debug ("%s: no /config node?\n" , __func__); +log_debug ("no /config node?\n" );return ; }if (IS_ENABLED (CONFIG_FASTBOOT )) {if (gpio_request_by_name_nodev (node,"st,fastboot-gpios" ,0 , &gpio,GPIOD_IS_IN )) { -debug ("%s: could not find a /config/st,fastboot-gpios\n" , - __func__); +log_debug ("could not find a /config/st,fastboot-gpios\n" ); }else {if (dm_gpio_get_value (&gpio)) { -puts ("Fastboot key pressed, " ); +log_notice ("Fastboot key pressed, " ); boot_mode =BOOT_FASTBOOT ; }
@@ -164,18 +165,17 @@ static void board_key_check(void)if (IS_ENABLED (CONFIG_CMD_STM32PROG )) {if (gpio_request_by_name_nodev (node,"st,stm32prog-gpios" ,0 , &gpio,GPIOD_IS_IN )) { -debug ("%s: could not find a /config/st,stm32prog-gpios\n" , - __func__); +log_debug ("could not find a /config/st,stm32prog-gpios\n" ); }else {if (dm_gpio_get_value (&gpio)) { -puts ("STM32Programmer key pressed, " ); +log_notice ("STM32Programmer key pressed, " ); boot_mode =BOOT_STM32PROG ; }dm_gpio_free (NULL , &gpio); } }if (boot_mode !=BOOT_NORMAL ) { -puts ("entering download mode...\n" ); +log_notice ("entering download mode...\n" );clrsetbits_le32 (TAMP_BOOT_CONTEXT ,TAMP_BOOT_FORCED_MASK , boot_mode);
@@ -198,8 +198,10 @@ int g_dnl_board_usb_cable_connected(void) ret =uclass_get_device_by_driver (UCLASS_USB_GADGET_GENERIC ,DM_GET_DRIVER (dwc2_udc_otg), &dwc2_udc_otg); -if (!ret) -debug ("dwc2_udc_otg init failed\n" ); +if (ret) { +log_debug ("dwc2_udc_otg init failed\n" ); +return ret; + }return dwc2_udc_B_session_valid (dwc2_udc_otg); }
@@ -231,13 +233,12 @@ static int get_led(struct udevice **dev, char *led_string) led_name =fdtdec_get_config_string (gd->fdt_blob, led_string);if (!led_name) { -pr_debug ("%s: could not find %s config string\n" , - __func__, led_string); +log_debug ("could not find %s config string\n" , led_string);return -ENOENT ; } ret =led_get_by_label (led_name, dev);if (ret) { -debug ("%s: get=%d\n" , __func__, ret); +log_debug ("get=%d\n" , ret);return ret; }
@@ -305,7 +306,7 @@ static int board_check_usb_power(void) node =ofnode_path ("/config" );if (!ofnode_valid (node)) { -debug ("%s: no /config node?\n" , __func__); +log_debug ("no /config node?\n" );return -ENOENT ; }
@@ -319,8 +320,7 @@ static int board_check_usb_power(void)if (adc_count == -ENOENT )return 0 ; -pr_err ("%s: can't find adc channel (%d)\n" , __func__, - adc_count); +log_err ("can't find adc channel (%d)\n" , adc_count);return adc_count; }
@@ -329,8 +329,7 @@ static int board_check_usb_power(void)if (ofnode_parse_phandle_with_args (node,"st,adc_usb_pd" ,"#io-channel-cells" ,0 , i, &adc_args)) { -pr_debug ("%s: can't find /config/st,adc_usb_pd\n" , - __func__); +log_debug ("can't find /config/st,adc_usb_pd\n" );return 0 ; }
@@ -338,16 +337,15 @@ static int board_check_usb_power(void) &adc);if (ret) { -pr_err ("%s: Can't get adc device(%d)\n" , __func__, - ret); +log_err ("Can't get adc device(%d)\n" , ret);return ret; } ret =adc_channel_single_shot (adc->name, adc_args.args[0 ], &raw);if (ret) { -pr_err ("%s: single shot failed for %s[%d]!\n" , - __func__, adc->name, adc_args.args[0 ]); +log_err ("single shot failed for %s[%d]!\n" , + adc->name, adc_args.args[0 ]);return ret; }/* Convert to uV */
@@ -356,11 +354,11 @@ static int board_check_usb_power(void) max_uV = uV;if (uV < min_uV) min_uV = uV; -pr_debug ("%s: %s[%02d] = %u, %d uV\n" , __func__, - adc->name, adc_args.args[0 ], raw, uV); +log_debug ("%s[%02d] = %u, %d uV\n" , + adc->name, adc_args.args[0 ], raw, uV); }else { -pr_err ("%s: Can't get uV value for %s[%d]\n" , - __func__, adc->name, adc_args.args[0 ]); +log_err ("Can't get uV value for %s[%d]\n" , + adc->name, adc_args.args[0 ]); } }
@@ -374,7 +372,7 @@ static int board_check_usb_power(void) min_uV <= USB_LOW_THRESHOLD_UV)return 0 ; -pr_err ("****************************************************\n" ); +log_notice ("****************************************************\n" );/* * If highest and lowest value are either both below
@@ -386,8 +384,8 @@ static int board_check_usb_power(void) min_uV > USB_LOW_THRESHOLD_UV) || (max_uV <= USB_LOW_THRESHOLD_UV && min_uV <= USB_LOW_THRESHOLD_UV)) { -pr_err ("* ERROR USB TYPE-C connection in unattached mode *\n" ); -pr_err ("* Check that USB TYPE-C cable is correctly plugged *\n" ); +log_notice ("* ERROR USB TYPE-C connection in unattached mode *\n" ); +log_notice ("* Check that USB TYPE-C cable is correctly plugged *\n" );/* with 125ms interval, led will blink for 17.02 years ....*/ nb_blink =U32_MAX ; }
@@ -395,14 +393,14 @@ static int board_check_usb_power(void)if (max_uV >USB_LOW_THRESHOLD_UV && max_uV <=USB_WARNING_LOW_THRESHOLD_UV && min_uV <=USB_LOW_THRESHOLD_UV ) { -pr_err ("* WARNING 500mA power supply detected *\n" ); +log_notice ("* WARNING 500mA power supply detected *\n" ); nb_blink =2 ; }if (max_uV >USB_WARNING_LOW_THRESHOLD_UV && max_uV <=USB_START_LOW_THRESHOLD_UV && min_uV <=USB_LOW_THRESHOLD_UV ) { -pr_err ("* WARNING 1.5A power supply detected *\n" ); +log_notice ("* WARNING 1.5A power supply detected *\n" ); nb_blink =3 ; }
@@ -411,14 +409,14 @@ static int board_check_usb_power(void)* supplies more than 3 Amp, this is not compliant with TypeC specification */ if (max_uV >USB_START_HIGH_THRESHOLD_UV ) { -pr_err ("* USB TYPE-C charger not compliant with *\n" ); -pr_err ("* specification *\n" ); -pr_err ("****************************************************\n\n" ); +log_notice ("* USB TYPE-C charger not compliant with *\n" ); +log_notice ("* specification *\n" ); +log_notice ("****************************************************\n\n" );/* with 125ms interval, led will blink for 17.02 years ....*/ nb_blink =U32_MAX ; }else { -pr_err ("* Current too low, use a 3A power supply! *\n" ); -pr_err ("****************************************************\n\n" ); +log_notice ("* Current too low, use a 3A power supply! *\n" ); +log_notice ("****************************************************\n\n" ); }led_error_blink (nb_blink);
@@ -471,7 +469,7 @@ static void sysconf_init(void)DM_GET_DRIVER (stm32mp_bsec), &dev);if (ret) { -pr_err ("Can't find stm32mp_bsec driver\n" ); +log_err ("Can't find stm32mp_bsec driver\n" );return ; }
@@ -494,13 +492,13 @@ static void sysconf_init(void) syscfg + SYSCFG_IOCTRLSETR);if (!otp) -pr_err ("product_below_2v5=0: HSLVEN protected by HW\n" ); +log_err ("product_below_2v5=0: HSLVEN protected by HW\n" ); }else {if (otp) -pr_err ("product_below_2v5=1: HSLVEN update is destructive, no update as VDD>2.7V\n" ); +log_err ("product_below_2v5=1: HSLVEN update is destructive, no update as VDD>2.7V\n" ); } }else { -debug ("VDD unknown" ); +log_debug ("VDD unknown" ); } }
@@ -514,7 +512,7 @@ static void sysconf_init(void) val &SYSCFG_CMPCR_READY , 1000000);if (ret) { -pr_err ("SYSCFG: I/O compensation failed, timeout.\n" ); +log_err ("SYSCFG: I/O compensation failed, timeout.\n" );led_error_blink (10 ); }
@@ -533,39 +531,37 @@ static int dk2_i2c1_fix(void) node =ofnode_path ("/soc/i2c at 40012000/hdmi-transmitter at 39" );if (!ofnode_valid (node)) { -pr_debug ("%s: no hdmi-transmitter at 39 ?\n" , __func__); +log_debug ("no hdmi-transmitter at 39 ?\n" );return -ENOENT ; }if (gpio_request_by_name_nodev (node,"reset-gpios" ,0 , &hdmi,GPIOD_IS_OUT )) { -pr_debug ("%s: could not find reset-gpios\n" , - __func__); +log_debug ("could not find reset-gpios\n" );return -ENOENT ; } node =ofnode_path ("/soc/i2c at 40012000/cs42l51 at 4a" );if (!ofnode_valid (node)) { -pr_debug ("%s: no cs42l51 at 4a ?\n" , __func__); +log_debug ("no cs42l51 at 4a ?\n" );return -ENOENT ; }if (gpio_request_by_name_nodev (node,"reset-gpios" ,0 , &audio,GPIOD_IS_OUT )) { -pr_debug ("%s: could not find reset-gpios\n" , - __func__); +log_debug ("could not find reset-gpios\n" );return -ENOENT ; }/* before power up, insure that HDMI and AUDIO IC is under reset */ ret =dm_gpio_set_value (&hdmi,1 );if (ret) { -pr_err ("%s: can't set_value for hdmi_nrst gpio" , __func__); +log_err ("can't set_value for hdmi_nrst gpio" ); goto error; } ret =dm_gpio_set_value (&audio,1 );if (ret) { -pr_err ("%s: can't set_value for audio_nrst gpio" , __func__); +log_err ("can't set_value for audio_nrst gpio" ); goto error; }
@@ -732,7 +728,7 @@ int board_interface_eth_init(struct udevice *dev,case PHY_INTERFACE_MODE_MII : value =SYSCFG_PMCSETR_ETH_SEL_GMII_MII |SYSCFG_PMCSETR_ETH_REF_CLK_SEL ; -debug ("%s: PHY_INTERFACE_MODE_MII\n" , __func__); +log_debug ("PHY_INTERFACE_MODE_MII\n" );break ;case PHY_INTERFACE_MODE_GMII :if (eth_clk_sel_reg)
@@ -740,7 +736,7 @@ int board_interface_eth_init(struct udevice *dev,SYSCFG_PMCSETR_ETH_CLK_SEL ; else value =SYSCFG_PMCSETR_ETH_SEL_GMII_MII ; -debug ("%s: PHY_INTERFACE_MODE_GMII\n" , __func__); +log_debug ("PHY_INTERFACE_MODE_GMII\n" );break ;case PHY_INTERFACE_MODE_RMII :if (eth_ref_clk_sel_reg)
@@ -748,7 +744,7 @@ int board_interface_eth_init(struct udevice *dev,SYSCFG_PMCSETR_ETH_REF_CLK_SEL ; else value =SYSCFG_PMCSETR_ETH_SEL_RMII ; -debug ("%s: PHY_INTERFACE_MODE_RMII\n" , __func__); +log_debug ("PHY_INTERFACE_MODE_RMII\n" );break ;case PHY_INTERFACE_MODE_RGMII :case PHY_INTERFACE_MODE_RGMII_ID :
@@ -759,11 +755,11 @@ int board_interface_eth_init(struct udevice *dev,SYSCFG_PMCSETR_ETH_CLK_SEL ; else value =SYSCFG_PMCSETR_ETH_SEL_RGMII ; -debug ("%s: PHY_INTERFACE_MODE_RGMII\n" , __func__); +log_debug ("PHY_INTERFACE_MODE_RGMII\n" );break ;default : -debug ("%s: Do not manage %d interface\n" , - __func__, interface_type); +log_debug ("Do not manage %d interface\n" , + interface_type);/* Do not manage others interfaces */ return -EINVAL ; }
@@ -862,14 +858,14 @@ static void board_copro_image_process(ulong fw_image, size_t fw_size)if (!rproc_is_initialized ())if (rproc_init ()) { -printf ("Remote Processor %d initialization failed\n" , - id); +log_err ("Remote Processor %d initialization failed\n" , + id);return ; } ret =rproc_load (id, fw_image, fw_size); -printf ("Load Remote Processor %d with data at addr=0x%08lx %u bytes:%s\n" , - id, fw_image, fw_size, ret ?" Failed!" :" Success!" ); +log_err ("Load Remote Processor %d with data at addr=0x%08lx %u bytes:%s\n" , + id, fw_image, fw_size, ret ?" Failed!" :" Success!" );if (!ret)rproc_start (id);
Signature · 1 line
2.17.1
PATCH 31/33 board: st: stm32mp1: migrate trace to dev and log macro
Hi Patrick
Quoted 383 lines · Patrick Delaunay
Change pr_* to
dev_orlog_macro and defineLOG_CATEGORY.Signed-off-by Patrick Delaunay <[email protected]>---
board/st/stm32mp1/stm32mp1.c | 134 +++++++++++++++++------------------ 1 file changed, 65 insertions(+), 69 deletions(-)board/st/stm32mp1/stm32mp1.c +63
-67@@ -2,6 +2,9 @@/* * Copyright (C) 2018, STMicroelectronics - All Rights Reserved */ + +#define LOG_CATEGORY LOGC_BOARD +#include <common.h> #include <adc.h> #include <bootm.h> @@ -106,12 +109,11 @@ int checkboard(void)else mode ="basic" ; -printf ("Board: stm32mp1 in %s mode" , mode); fdt_compat =fdt_getprop (gd->fdt_blob,0 ,"compatible" , &fdt_compat_len); -if (fdt_compat && fdt_compat_len) -printf (" (%s)" , fdt_compat); -puts ("\n" ); + +log_info ("Board: stm32mp1 in %s mode (%s)\n" , mode, + fdt_compat && fdt_compat_len ? fdt_compat :"" );/* display the STMicroelectronics board identification */ if (CONFIG_IS_ENABLED (CMD_STBOARD )) {@@ -122,12 +124,12 @@ int checkboard(void) ret =misc_read (dev,STM32_BSEC_SHADOW (BSEC_OTP_BOARD ), &otp,sizeof (otp));if (ret >0 && otp) -printf ("Board: MB%04x Var%d.%d Rev.%c-%02d\n" , - otp >>16 , - (otp >>12 ) &0xF , - (otp >>4 ) &0xF , - ((otp >>8 ) &0xF ) -1 +'A' , - otp &0xF ); +log_info ("Board: MB%04x Var%d.%d Rev.%c-%02d\n" , + otp >>16 , + (otp >>12 ) &0xF , + (otp >>4 ) &0xF , + ((otp >>8 ) &0xF ) -1 +'A' , + otp &0xF ); }return 0 ;@@ -144,17 +146,16 @@ static void board_key_check(void) node =ofnode_path ("/config" );if (!ofnode_valid (node)) { -debug ("%s: no /config node?\n" , __func__); +log_debug ("no /config node?\n" );return ; }if (IS_ENABLED (CONFIG_FASTBOOT )) {if (gpio_request_by_name_nodev (node,"st,fastboot-gpios" ,0 , &gpio,GPIOD_IS_IN )) { -debug ("%s: could not find a /config/st,fastboot-gpios\n" , - __func__); +log_debug ("could not find a /config/st,fastboot-gpios\n" ); }else {if (dm_gpio_get_value (&gpio)) { -puts ("Fastboot key pressed, " ); +log_notice ("Fastboot key pressed, " ); boot_mode =BOOT_FASTBOOT ; }@@ -164,18 +165,17 @@ static void board_key_check(void)if (IS_ENABLED (CONFIG_CMD_STM32PROG )) {if (gpio_request_by_name_nodev (node,"st,stm32prog-gpios" ,0 , &gpio,GPIOD_IS_IN )) { -debug ("%s: could not find a /config/st,stm32prog-gpios\n" , - __func__); +log_debug ("could not find a /config/st,stm32prog-gpios\n" ); }else {if (dm_gpio_get_value (&gpio)) { -puts ("STM32Programmer key pressed, " ); +log_notice ("STM32Programmer key pressed, " ); boot_mode =BOOT_STM32PROG ; }dm_gpio_free (NULL , &gpio); } }if (boot_mode !=BOOT_NORMAL ) { -puts ("entering download mode...\n" ); +log_notice ("entering download mode...\n" );clrsetbits_le32 (TAMP_BOOT_CONTEXT ,TAMP_BOOT_FORCED_MASK , boot_mode);@@ -198,8 +198,10 @@ int g_dnl_board_usb_cable_connected(void) ret =uclass_get_device_by_driver (UCLASS_USB_GADGET_GENERIC ,DM_GET_DRIVER (dwc2_udc_otg), &dwc2_udc_otg); -if (!ret) -debug ("dwc2_udc_otg init failed\n" ); +if (ret) { +log_debug ("dwc2_udc_otg init failed\n" ); +return ret; + }return dwc2_udc_B_session_valid (dwc2_udc_otg); }@@ -231,13 +233,12 @@ static int get_led(struct udevice **dev, char *led_string) led_name =fdtdec_get_config_string (gd->fdt_blob, led_string);if (!led_name) { -pr_debug ("%s: could not find %s config string\n" , - __func__, led_string); +log_debug ("could not find %s config string\n" , led_string);return -ENOENT ; } ret =led_get_by_label (led_name, dev);if (ret) { -debug ("%s: get=%d\n" , __func__, ret); +log_debug ("get=%d\n" , ret);return ret; }@@ -305,7 +306,7 @@ static int board_check_usb_power(void) node =ofnode_path ("/config" );if (!ofnode_valid (node)) { -debug ("%s: no /config node?\n" , __func__); +log_debug ("no /config node?\n" );return -ENOENT ; }@@ -319,8 +320,7 @@ static int board_check_usb_power(void)if (adc_count == -ENOENT )return 0 ; -pr_err ("%s: can't find adc channel (%d)\n" , __func__, - adc_count); +log_err ("can't find adc channel (%d)\n" , adc_count);return adc_count; }@@ -329,8 +329,7 @@ static int board_check_usb_power(void)if (ofnode_parse_phandle_with_args (node,"st,adc_usb_pd" ,"#io-channel-cells" ,0 , i, &adc_args)) { -pr_debug ("%s: can't find /config/st,adc_usb_pd\n" , - __func__); +log_debug ("can't find /config/st,adc_usb_pd\n" );return 0 ; }@@ -338,16 +337,15 @@ static int board_check_usb_power(void) &adc);if (ret) { -pr_err ("%s: Can't get adc device(%d)\n" , __func__, - ret); +log_err ("Can't get adc device(%d)\n" , ret);return ret; } ret =adc_channel_single_shot (adc->name, adc_args.args[0 ], &raw);if (ret) { -pr_err ("%s: single shot failed for %s[%d]!\n" , - __func__, adc->name, adc_args.args[0 ]); +log_err ("single shot failed for %s[%d]!\n" , + adc->name, adc_args.args[0 ]);return ret; }/* Convert to uV */ @@ -356,11 +354,11 @@ static int board_check_usb_power(void) max_uV = uV;if (uV < min_uV) min_uV = uV; -pr_debug ("%s: %s[%02d] = %u, %d uV\n" , __func__, - adc->name, adc_args.args[0 ], raw, uV); +log_debug ("%s[%02d] = %u, %d uV\n" , + adc->name, adc_args.args[0 ], raw, uV); }else { -pr_err ("%s: Can't get uV value for %s[%d]\n" , - __func__, adc->name, adc_args.args[0 ]); +log_err ("Can't get uV value for %s[%d]\n" , + adc->name, adc_args.args[0 ]); } }@@ -374,7 +372,7 @@ static int board_check_usb_power(void) min_uV <= USB_LOW_THRESHOLD_UV)return 0 ; -pr_err ("****************************************************\n" ); +log_notice ("****************************************************\n" );/* * If highest and lowest value are either both below @@ -386,8 +384,8 @@ static int board_check_usb_power(void) min_uV > USB_LOW_THRESHOLD_UV) || (max_uV <= USB_LOW_THRESHOLD_UV && min_uV <= USB_LOW_THRESHOLD_UV)) { -pr_err ("* ERROR USB TYPE-C connection in unattached mode *\n" ); -pr_err ("* Check that USB TYPE-C cable is correctly plugged *\n" ); +log_notice ("* ERROR USB TYPE-C connection in unattached mode *\n" ); +log_notice ("* Check that USB TYPE-C cable is correctly plugged *\n" );/* with 125ms interval, led will blink for 17.02 years ....*/ nb_blink =U32_MAX ; }@@ -395,14 +393,14 @@ static int board_check_usb_power(void)if (max_uV >USB_LOW_THRESHOLD_UV && max_uV <=USB_WARNING_LOW_THRESHOLD_UV && min_uV <=USB_LOW_THRESHOLD_UV ) { -pr_err ("* WARNING 500mA power supply detected *\n" ); +log_notice ("* WARNING 500mA power supply detected *\n" ); nb_blink =2 ; }if (max_uV >USB_WARNING_LOW_THRESHOLD_UV && max_uV <=USB_START_LOW_THRESHOLD_UV && min_uV <=USB_LOW_THRESHOLD_UV ) { -pr_err ("* WARNING 1.5A power supply detected *\n" ); +log_notice ("* WARNING 1.5A power supply detected *\n" ); nb_blink =3 ; }@@ -411,14 +409,14 @@ static int board_check_usb_power(void)* supplies more than 3 Amp, this is not compliant with TypeC specification */ if (max_uV >USB_START_HIGH_THRESHOLD_UV ) { -pr_err ("* USB TYPE-C charger not compliant with *\n" ); -pr_err ("* specification *\n" ); -pr_err ("****************************************************\n\n" ); +log_notice ("* USB TYPE-C charger not compliant with *\n" ); +log_notice ("* specification *\n" ); +log_notice ("****************************************************\n\n" );/* with 125ms interval, led will blink for 17.02 years ....*/ nb_blink =U32_MAX ; }else { -pr_err ("* Current too low, use a 3A power supply! *\n" ); -pr_err ("****************************************************\n\n" ); +log_notice ("* Current too low, use a 3A power supply! *\n" ); +log_notice ("****************************************************\n\n" ); }led_error_blink (nb_blink);@@ -471,7 +469,7 @@ static void sysconf_init(void)DM_GET_DRIVER (stm32mp_bsec), &dev);if (ret) { -pr_err ("Can't find stm32mp_bsec driver\n" ); +log_err ("Can't find stm32mp_bsec driver\n" );return ; }@@ -494,13 +492,13 @@ static void sysconf_init(void) syscfg + SYSCFG_IOCTRLSETR);if (!otp) -pr_err ("product_below_2v5=0: HSLVEN protected by HW\n" ); +log_err ("product_below_2v5=0: HSLVEN protected by HW\n" ); }else {if (otp) -pr_err ("product_below_2v5=1: HSLVEN update is destructive, no update as VDD>2.7V\n" ); +log_err ("product_below_2v5=1: HSLVEN update is destructive, no update as VDD>2.7V\n" ); } }else { -debug ("VDD unknown" ); +log_debug ("VDD unknown" ); } }@@ -514,7 +512,7 @@ static void sysconf_init(void) val &SYSCFG_CMPCR_READY , 1000000);if (ret) { -pr_err ("SYSCFG: I/O compensation failed, timeout.\n" ); +log_err ("SYSCFG: I/O compensation failed, timeout.\n" );led_error_blink (10 ); }@@ -533,39 +531,37 @@ static int dk2_i2c1_fix(void) node =ofnode_path ("/soc/i2c at 40012000/hdmi-transmitter at 39" );if (!ofnode_valid (node)) { -pr_debug ("%s: no hdmi-transmitter at 39 ?\n" , __func__); +log_debug ("no hdmi-transmitter at 39 ?\n" );return -ENOENT ; }if (gpio_request_by_name_nodev (node,"reset-gpios" ,0 , &hdmi,GPIOD_IS_OUT )) { -pr_debug ("%s: could not find reset-gpios\n" , - __func__); +log_debug ("could not find reset-gpios\n" );return -ENOENT ; } node =ofnode_path ("/soc/i2c at 40012000/cs42l51 at 4a" );if (!ofnode_valid (node)) { -pr_debug ("%s: no cs42l51 at 4a ?\n" , __func__); +log_debug ("no cs42l51 at 4a ?\n" );return -ENOENT ; }if (gpio_request_by_name_nodev (node,"reset-gpios" ,0 , &audio,GPIOD_IS_OUT )) { -pr_debug ("%s: could not find reset-gpios\n" , - __func__); +log_debug ("could not find reset-gpios\n" );return -ENOENT ; }/* before power up, insure that HDMI and AUDIO IC is under reset */ ret =dm_gpio_set_value (&hdmi,1 );if (ret) { -pr_err ("%s: can't set_value for hdmi_nrst gpio" , __func__); +log_err ("can't set_value for hdmi_nrst gpio" ); goto error; } ret =dm_gpio_set_value (&audio,1 );if (ret) { -pr_err ("%s: can't set_value for audio_nrst gpio" , __func__); +log_err ("can't set_value for audio_nrst gpio" ); goto error; }@@ -732,7 +728,7 @@ int board_interface_eth_init(struct udevice *dev,case PHY_INTERFACE_MODE_MII : value =SYSCFG_PMCSETR_ETH_SEL_GMII_MII |SYSCFG_PMCSETR_ETH_REF_CLK_SEL ; -debug ("%s: PHY_INTERFACE_MODE_MII\n" , __func__); +log_debug ("PHY_INTERFACE_MODE_MII\n" );break ;case PHY_INTERFACE_MODE_GMII :if (eth_clk_sel_reg)@@ -740,7 +736,7 @@ int board_interface_eth_init(struct udevice *dev,SYSCFG_PMCSETR_ETH_CLK_SEL ; else value =SYSCFG_PMCSETR_ETH_SEL_GMII_MII ; -debug ("%s: PHY_INTERFACE_MODE_GMII\n" , __func__); +log_debug ("PHY_INTERFACE_MODE_GMII\n" );break ;case PHY_INTERFACE_MODE_RMII :if (eth_ref_clk_sel_reg)@@ -748,7 +744,7 @@ int board_interface_eth_init(struct udevice *dev,SYSCFG_PMCSETR_ETH_REF_CLK_SEL ; else value =SYSCFG_PMCSETR_ETH_SEL_RMII ; -debug ("%s: PHY_INTERFACE_MODE_RMII\n" , __func__); +log_debug ("PHY_INTERFACE_MODE_RMII\n" );break ;case PHY_INTERFACE_MODE_RGMII :case PHY_INTERFACE_MODE_RGMII_ID :@@ -759,11 +755,11 @@ int board_interface_eth_init(struct udevice *dev,SYSCFG_PMCSETR_ETH_CLK_SEL ; else value =SYSCFG_PMCSETR_ETH_SEL_RGMII ; -debug ("%s: PHY_INTERFACE_MODE_RGMII\n" , __func__); +log_debug ("PHY_INTERFACE_MODE_RGMII\n" );break ;default : -debug ("%s: Do not manage %d interface\n" , - __func__, interface_type); +log_debug ("Do not manage %d interface\n" , + interface_type);/* Do not manage others interfaces */ return -EINVAL ; }@@ -862,14 +858,14 @@ static void board_copro_image_process(ulong fw_image, size_t fw_size)if (!rproc_is_initialized ())if (rproc_init ()) { -printf ("Remote Processor %d initialization failed\n" , - id); +log_err ("Remote Processor %d initialization failed\n" , + id);return ;
board/st/stm32mp1/stm32mp1.c static void board_copro_image_process(ulong fw_image, size_t fw_size) · line 871
Quoted 10 lines
board/st/stm32mp1/stm32mp1.c +2
-2} ret =rproc_load (id, fw_image, fw_size); -printf ("Load Remote Processor %d with data at addr=0x%08lx %u bytes:%s\n" , - id, fw_image, fw_size, ret ?" Failed!" :" Success!" ); +log_err ("Load Remote Processor %d with data at addr=0x%08lx %u bytes:%s\n" , + id, fw_image, fw_size, ret ?" Failed!" :" Success!" );if (!ret)rproc_start (id);
Thanks
PATCH 32/33 board: st: common: migrate trace to dev and log macro
In reply to Patrick DelaunayChange pr_* to dev_ or log_ macro and define LOG_CATEGORY.
---
board/st/common/stm32mp_dfu.c | 3 ++- board/st/common/stm32mp_mtdparts.c | 5 +++-- board/st/common/stpmic1.c | 5 ++++- board/st/common/stusb160x.c | 2 ++ 4 files changed, 11 insertions(+), 4 deletions(-)
board/st/common/stm32mp_dfu.c +2 -1
@@ -8,6 +8,7 @@#include <dm.h> #include <dfu.h> #include <env.h> +#include <log.h> #include <memalign.h> #include <misc.h> #include <mtd.h>
@@ -199,7 +200,7 @@ static int dfu_pmic_read(u64 offset, u8 *buffer, long *size) ret = 0; }#else -pr_err ("PMIC update not supported" ); +log_err ("PMIC update not supported" ); ret = -EOPNOTSUPP ;#endif
board/st/common/stm32mp_mtdparts.c +3 -2
@@ -8,6 +8,7 @@#include <dm.h> #include <env.h> #include <env_internal.h> +#include <log.h> #include <mtd.h> #include <mtd_node.h> #include <tee.h>
@@ -117,7 +118,7 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)for (uclass_first_device (UCLASS_MTD , &dev); dev;uclass_next_device (&dev)) { -pr_debug ("mtd device = %s\n" , dev->name); +log_debug ("mtd device = %s\n" , dev->name); }if (nor || nand) {
@@ -163,5 +164,5 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts) mtd_initialized = true; *mtdids = ids; *mtdparts = parts; -debug ("%s:mtdids=%s & mtdparts=%s\n" , __func__, ids, parts); +log_debug ("mtdids=%s & mtdparts=%s\n" , ids, parts); }
board/st/common/stpmic1.c +4 -1
@@ -3,8 +3,11 @@* Copyright (C) 2020, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY LOGC_BOARD +#include <common.h> #include <dm.h> +#include <log.h> #include <asm/io.h> #include <asm/arch/ddr.h> #include <linux/bitops.h>
@@ -202,7 +205,7 @@ void stpmic1_init(u32 voltage_mv)/* Check if debug is enabled to program PMIC according to the bit */ if (readl (TAMP_BOOT_CONTEXT ) &TAMP_BOOT_DEBUG_ON ) { -printf ("Keep debug unit ON\n" ); +log_info ("Keep debug unit ON\n" ); pmic_clrsetbits(dev, STPMIC1_BUCKS_MRST_CR, STPMIC1_MRST_BUCK_DEBUG,
board/st/common/stusb160x.c +2 -0
@@ -6,6 +6,8 @@* Copyright (C) 2020, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_I2C_GENERIC +#include <common.h> #include <dm.h> #include <i2c.h>
Signature · 1 line
2.17.1
PATCH 32/33 board: st: common: migrate trace to dev and log macro
Hi Patrick
Quoted 90 lines · Patrick Delaunay
Change pr_* to
dev_orlog_macro and defineLOG_CATEGORY.Signed-off-by Patrick Delaunay <[email protected]>---
board/st/common/stm32mp_dfu.c | 3 ++- board/st/common/stm32mp_mtdparts.c | 5 +++-- board/st/common/stpmic1.c | 5 ++++- board/st/common/stusb160x.c | 2 ++ 4 files changed, 11 insertions(+), 4 deletions(-)board/st/common/stm32mp_dfu.c +2
-1@@ -8,6 +8,7 @@#include <dm.h> #include <dfu.h> #include <env.h> +#include <log.h> #include <memalign.h> #include <misc.h> #include <mtd.h> @@ -199,7 +200,7 @@ static int dfu_pmic_read(u64 offset, u8 *buffer, long *size) ret = 0; }#else -pr_err ("PMIC update not supported" ); +log_err ("PMIC update not supported" ); ret = -EOPNOTSUPP ;#endif board/st/common/stm32mp_mtdparts.c +3
-2@@ -8,6 +8,7 @@#include <dm.h> #include <env.h> #include <env_internal.h> +#include <log.h> #include <mtd.h> #include <mtd_node.h> #include <tee.h> @@ -117,7 +118,7 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts)for (uclass_first_device (UCLASS_MTD , &dev); dev;uclass_next_device (&dev)) { -pr_debug ("mtd device = %s\n" , dev->name); +log_debug ("mtd device = %s\n" , dev->name); }if (nor || nand) {@@ -163,5 +164,5 @@ void board_mtdparts_default(const char **mtdids, const char **mtdparts) mtd_initialized = true; *mtdids = ids; *mtdparts = parts; -debug ("%s:mtdids=%s & mtdparts=%s\n" , __func__, ids, parts); +log_debug ("mtdids=%s & mtdparts=%s\n" , ids, parts); }board/st/common/stpmic1.c +4
-1@@ -3,8 +3,11 @@* Copyright (C) 2020, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY LOGC_BOARD +#include <common.h> #include <dm.h> +#include <log.h> #include <asm/io.h> #include <asm/arch/ddr.h> #include <linux/bitops.h> @@ -202,7 +205,7 @@ void stpmic1_init(u32 voltage_mv)/* Check if debug is enabled to program PMIC according to the bit */ if (readl (TAMP_BOOT_CONTEXT ) &TAMP_BOOT_DEBUG_ON ) { -printf ("Keep debug unit ON\n" ); +log_info ("Keep debug unit ON\n" ); pmic_clrsetbits(dev, STPMIC1_BUCKS_MRST_CR, STPMIC1_MRST_BUCK_DEBUG,board/st/common/stusb160x.c +0
-0
board/st/common/stusb160x.c line 13
Quoted 8 lines
board/st/common/stusb160x.c +2
-0@@ -6,6 +6,8 @@* Copyright (C) 2020, STMicroelectronics - All Rights Reserved */ +#define LOG_CATEGORY UCLASS_I2C_GENERIC +#include <common.h> #include <dm.h> #include <i2c.h>
Thanks
PATCH 33/33 configs: stm32mp15: enable LOG features
In reply to Patrick DelaunayActivate the logging features in SPL and U-Boot (CONFIG_LOG and CONFIG_SPL_LOG) and the command 'log' with CONFIG_CMD_LOG.
---
configs/stm32mp15_basic_defconfig | 2 ++ configs/stm32mp15_trusted_defconfig | 1 + 2 files changed, 3 insertions(+)
configs/stm32mp15_basic_defconfig +2 -0
@@ -19,6 +19,7 @@ CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1" CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SPL_LOG=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3
@@ -57,6 +58,7 @@ CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_LOG=y CONFIG_CMD_UBI=y # CONFIG_SPL_DOS_PARTITION is not set CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"
configs/stm32mp15_trusted_defconfig +1 -0
@@ -41,6 +41,7 @@ CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_LOG=y CONFIG_CMD_UBI=y CONFIG_ENV_IS_NOWHERE=y CONFIG_ENV_IS_IN_MMC=y
Signature · 1 line
2.17.1
PATCH 33/33 configs: stm32mp15: enable LOG features
Hi Patrick
Quoted 36 lines · Patrick Delaunay
Activate the logging features in SPL and U-Boot (
CONFIG_LOGandCONFIG_SPL_LOG) and the command 'log' withCONFIG_CMD_LOG.Signed-off-by Patrick Delaunay <[email protected]>---
configs/stm32mp15_basic_defconfig | 2 ++ configs/stm32mp15_trusted_defconfig | 1 + 2 files changed, 3 insertions(+)configs/stm32mp15_basic_defconfig +2
-0@@ -19,6 +19,7 @@ CONFIG_DEFAULT_DEVICE_TREE="stm32mp157c-ev1" CONFIG_DISTRO_DEFAULTS=y CONFIG_FIT=y CONFIG_BOOTCOMMAND="run bootcmd_stm32mp" +CONFIG_SPL_LOG=y CONFIG_BOARD_EARLY_INIT_F=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=3@@ -57,6 +58,7 @@ CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_LOG=y CONFIG_CMD_UBI=y # CONFIG_SPL_DOS_PARTITION is not set CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-names interrupts-extended interrupt-controller \\\#interrupt-cells interrupt-parent dmas dma-names assigned-clocks assigned-clock-rates assigned-clock-parents hwlocks"configs/stm32mp15_trusted_defconfig +0
-0
configs/stm32mp15_trusted_defconfig CONFIG_CMD_PMIC=y · line 47
Quoted 7 lines
configs/stm32mp15_trusted_defconfig +1
-0@@ -41,6 +41,7 @@ CONFIG_CMD_PMIC=y CONFIG_CMD_REGULATOR=y CONFIG_CMD_EXT4_WRITE=y CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_LOG=y CONFIG_CMD_UBI=y CONFIG_ENV_IS_NOWHERE=y CONFIG_ENV_IS_IN_MMC=y
Thanks
cover stm32: enable logging features
In reply to Patrick DelaunayHi Patrick,
Quoted 50 lines · Patrick Delaunay
This patch-set migrates several stm32 drivers to API compatible with logging features (use dev_...() or log_...() function) and activate the logging features in STM32MP15 boards.
The size of U-Boot increased by 19kB (933026 to 952830 on STM32MP157C-EV1 board for basic defconfig) but the boot time don't change drastically.
For example on STM32MP157C-EV1 board:
1/ Before LOG patchset
Timer summary in microseconds (12 records):
Mark Elapsed Stage 0 0 reset 224,514 224,514 SPL 961,170 736,656 end SPL 964,006 2,836 board_init_f 1,186,986 222,980 board_init_r 1,651,379 464,393 id=64 1,674,463 23,084 id=65 1,675,164 701 main_loop 4,025,806 2,350,642 id=175Accumulated time:
55,064 dm_f 66,749 dm_r 88,796 dm_spl2/ With LOG activated (after this patchset)
Timer summary in microseconds (12 records):
Mark Elapsed Stage 0 0 reset 227,142 227,142 SPL 984,585 757,443 end SPL 987,579 2,994 board_init_f 1,210,091 222,512 board_init_r 1,673,354 463,263 id=64 1,696,073 22,719 id=65 1,696,775 702 main_loop 5,443,104 3,746,329 id=175Accumulated time:
62,154 dm_f 66,264 dm_r 89,376 dm_spl
Quoted 5 lines
For information even with all trace embbeded in U-Boot but not activated, MAX_LOG_LEVEL=8 and LOG_DEFAULT_LEVEL=6
Size increase by 190KB (952830 to 1147918) but
boot time is stable (1,748s vs 1,696s).
This seems pretty bad. Is this because of console output, or something else? I understand the size increase, but not the boot time increase.
Quoted 108 lines
STM32MP> bootstage report
Timer summary in microseconds (12 records):Mark Elapsed Stage 0 0 reset 230,028 230,028 SPL 996,117 766,089 end SPL 999,082 2,965 board_init_f 1,220,225 221,143 board_init_r 1,718,641 498,416 id=64 1,746,096 27,455 id=65 1,748,202 2,106 main_loop 4,509,271 2,761,069 id=175Accumulated time:
58,481 dm_f 68,881 dm_r 89,385 dm_splPatrick Delaunay (33):
arm: stm32mp: migrate trace to log macro
arm: stm32mp: migratecmd_stm32progto log macro
arm: stm32mp: bsec: migrate trace to log macro
pinctrl: stm32: migrate trace to log macro
gpio: stm32-gpio: migrate trace to dev and log macro
remoproc: stm32: migrate trace to log macro
ram: stm32: migrate trace to log macro
ram: stm32mp1: migrate trace to dev or log macro
mmc:stm32_sdmmc2: migrate trace to dev and log macro
timer: stm32: migrate trace to log macro
hwspinlock: stm32: migrate trace to log macro
rtc: stm32: migrate trace to log macro
watchdog: stm32mp: migrate trace to dev macro
power: regulator: stm32-verfbuf: defineLOG_CATEGORY
misc: rcc: migrate trace to dev macro
misc: rcc: keep the rcc device name for subnode
clk: stm32mp1: migrate trace to dev and log macro
clk:clk_stm32f: migrate trace to dev and log macro
clk:clk_stm32h7: migrate trace to dev and log macro
reset: stm32-reset: migrate trace to dev and log macro
mailbox: stm32-ipcc: migrate trace to dev and log macro
i2c:stm32f7_i2c: migrate trace to dev and log macro
phy: stm32-usbphyc: migrate trace to dev and log macro
spi:stm32_spi: migrate trace to dev and log macro
spi:stm32_qspi: migrate trace to dev and log macro
mtd:stm32_fmc2: migrate trace to dev and log macro
memory: stm32-fmc2: migrate trace to dev and log macro
serial: stm32: defineLOG_CATEGORY
video:stm32_ltdc: migrate trace to dev and log macro
video:stm32_dsi: migrate trace to dev and log macro
board: st: stm32mp1: migrate trace to dev and log macro
board: st: common: migrate trace to dev and log macro
configs: stm32mp15: enable LOG featuresarch/arm/mach-stm32mp/boot_params.c | 8 +- arch/arm/mach-stm32mp/bsec.c | 38 +++-- arch/arm/mach-stm32mp/cmd_stm32key.c | 3 +- .../cmd_stm32prog/cmd_stm32prog.c | 4 +- .../mach-stm32mp/cmd_stm32prog/stm32prog.c | 112 ++++++------- .../mach-stm32mp/cmd_stm32prog/stm32prog.h | 2 +- .../cmd_stm32prog/stm32prog_serial.c | 24 +-- .../cmd_stm32prog/stm32prog_usb.c | 14 +- arch/arm/mach-stm32mp/cpu.c | 18 ++- arch/arm/mach-stm32mp/dram_init.c | 8 +- arch/arm/mach-stm32mp/fdt.c | 17 +- arch/arm/mach-stm32mp/pwr_regulator.c | 2 + arch/arm/mach-stm32mp/spl.c | 16 +- board/st/common/stm32mp_dfu.c | 3 +- board/st/common/stm32mp_mtdparts.c | 5 +- board/st/common/stpmic1.c | 5 +- board/st/common/stusb160x.c | 2 + board/st/stm32mp1/stm32mp1.c | 134 ++++++++-------- configs/stm32mp15_basic_defconfig | 2 + configs/stm32mp15_trusted_defconfig | 1 + drivers/clk/clk_stm32f.c | 39 ++--- drivers/clk/clk_stm32h7.c | 70 +++++---- drivers/clk/clk_stm32mp1.c | 147 +++++++++--------- drivers/gpio/stm32_gpio.c | 4 +- drivers/hwspinlock/stm32_hwspinlock.c | 2 + drivers/i2c/stm32f7_i2c.c | 74 ++++----- drivers/mailbox/stm32-ipcc.c | 16 +- drivers/memory/stm32-fmc2-ebi.c | 30 ++-- drivers/misc/stm32_rcc.c | 10 +- drivers/mmc/stm32_sdmmc2.c | 85 +++++----- drivers/mtd/nand/raw/stm32_fmc2_nand.c | 40 +++-- drivers/phy/phy-stm32-usbphyc.c | 18 ++- drivers/pinctrl/pinctrl_stm32.c | 30 ++-- drivers/power/regulator/stm32-vrefbuf.c | 2 + drivers/ram/stm32_sdram.c | 10 +- drivers/ram/stm32mp1/stm32mp1_ddr.c | 36 +++-- drivers/ram/stm32mp1/stm32mp1_interactive.c | 4 +- drivers/ram/stm32mp1/stm32mp1_ram.c | 37 +++-- drivers/ram/stm32mp1/stm32mp1_tests.c | 19 ++- drivers/ram/stm32mp1/stm32mp1_tuning.c | 124 +++++++-------- drivers/remoteproc/stm32_copro.c | 3 +- drivers/reset/stm32-reset.c | 13 +- drivers/rtc/stm32_rtc.c | 3 + drivers/serial/serial_stm32.c | 3 + drivers/spi/stm32_qspi.c | 46 +++--- drivers/spi/stm32_spi.c | 31 ++-- drivers/timer/stm32_timer.c | 2 + drivers/video/stm32/stm32_dsi.c | 18 ++- drivers/video/stm32/stm32_ltdc.c | 33 ++-- drivers/watchdog/stm32mp_wdt.c | 9 +- 50 files changed, 731 insertions(+), 645 deletions(-)
Quoted 3 lines
--
2.17.1
Regards,
Simon
cover stm32: enable logging features
Hi Simon,
Quoted 58 lines
From: Simon Glass <[email protected]>
Sent: jeudi 15 octobre 2020 17:06Hi Patrick,
Quoted 8 lines · Patrick Delaunay
This patch-set migrates several stm32 drivers to API compatible with logging features (use dev_...() or log_...() function) and activate the logging features in STM32MP15 boards.
The size of U-Boot increased by 19kB (933026 to 952830 on STM32MP157C-EV1 board for basic defconfig) but the boot time don't change
drastically.
Quoted 41 lines
For example on STM32MP157C-EV1 board:
1/ Before LOG patchset
Timer summary in microseconds (12 records):
Mark Elapsed Stage 0 0 reset 224,514 224,514 SPL 961,170 736,656 end SPL 964,006 2,836 board_init_f 1,186,986 222,980 board_init_r 1,651,379 464,393 id=64 1,674,463 23,084 id=65 1,675,164 701 main_loop 4,025,806 2,350,642 id=175Accumulated time:
55,064 dm_f 66,749 dm_r 88,796 dm_spl2/ With LOG activated (after this patchset)
Timer summary in microseconds (12 records):
Mark Elapsed Stage 0 0 reset 227,142 227,142 SPL 984,585 757,443 end SPL 987,579 2,994 board_init_f 1,210,091 222,512 board_init_r 1,673,354 463,263 id=64 1,696,073 22,719 id=65 1,696,775 702 main_loop 5,443,104 3,746,329 id=175Accumulated time:
62,154 dm_f 66,264 dm_r 89,376 dm_spl
Quoted 8 lines
Quoted 5 lines
For information even with all trace embbeded in U-Boot but not activated, MAX_LOG_LEVEL=8 and LOG_DEFAULT_LEVEL=6
Size increase by 190KB (952830 to 1147918) but boot time is stable (1,748s vs 1,696s).
This seems pretty bad. Is this because of console output, or something else? I understand the size increase, but not the boot time increase.
For this last point I just execute STM32MP157C-EV1 boot with a patch in configs/stm32mp15_basic_defconfig
+CONFIG_LOGLEVEL=8
+CONFIG_LOG_MAX_LEVEL=8
+CONFIG_LOG_DEFAULT_LEVEL=6
+CONFIG_LOGF_FILE=y
+CONFIG_LOGF_LINE=y
+CONFIG_LOGF_FUNC=y
And execute "bootstage report" after the second boot (the first boot is pertubated by env save)
I think the delta is linked to
1/ size of U-Boot (SPL spent more time to load U-Boot)
end of SPL 987,579 => 996,117
2/ time to check for each debug trace: because I increase the log level
(gd->default_log_level = 6 < MAX_LOG_LEVEL=8)
3/ treatment added in log_console_emit (some printf) and
log_dispatch (processing_msg / gd->loghead)
4/ lower cache performancy as trace code are pesent in memory even
they are not used
Can I do some check/experimentation on my side ?
Patrick
Quoted 21 lines
Quoted 21 lines
STM32MP> bootstage report
Timer summary in microseconds (12 records):Mark Elapsed Stage 0 0 reset 230,028 230,028 SPL 996,117 766,089 end SPL 999,082 2,965 board_init_f 1,220,225 221,143 board_init_r 1,718,641 498,416 id=64 1,746,096 27,455 id=65 1,748,202 2,106 main_loop 4,509,271 2,761,069 id=175Accumulated time:
58,481 dm_f 68,881 dm_r 89,385 dm_spl
(...)
cover stm32: enable logging features
Hi Patrick,
Quoted 80 lines · Patrick DELAUNAY
Hi Simon,
Quoted 58 lines
From: Simon Glass <[email protected]>
Sent: jeudi 15 octobre 2020 17:06Hi Patrick,
Quoted 8 lines · Patrick Delaunay
This patch-set migrates several stm32 drivers to API compatible with logging features (use dev_...() or log_...() function) and activate the logging features in STM32MP15 boards.
The size of U-Boot increased by 19kB (933026 to 952830 on STM32MP157C-EV1 board for basic defconfig) but the boot time don't change
drastically.
Quoted 41 lines
For example on STM32MP157C-EV1 board:
1/ Before LOG patchset
Timer summary in microseconds (12 records):
Mark Elapsed Stage 0 0 reset 224,514 224,514 SPL 961,170 736,656 end SPL 964,006 2,836 board_init_f 1,186,986 222,980 board_init_r 1,651,379 464,393 id=64 1,674,463 23,084 id=65 1,675,164 701 main_loop 4,025,806 2,350,642 id=175Accumulated time:
55,064 dm_f 66,749 dm_r 88,796 dm_spl2/ With LOG activated (after this patchset)
Timer summary in microseconds (12 records):
Mark Elapsed Stage 0 0 reset 227,142 227,142 SPL 984,585 757,443 end SPL 987,579 2,994 board_init_f 1,210,091 222,512 board_init_r 1,673,354 463,263 id=64 1,696,073 22,719 id=65 1,696,775 702 main_loop 5,443,104 3,746,329 id=175Accumulated time:
62,154 dm_f 66,264 dm_r 89,376 dm_splQuoted 8 lines
Quoted 5 lines
For information even with all trace embbeded in U-Boot but not activated, MAX_LOG_LEVEL=8 and LOG_DEFAULT_LEVEL=6
Size increase by 190KB (952830 to 1147918) but boot time is stable (1,748s vs 1,696s).
This seems pretty bad. Is this because of console output, or something else? I understand the size increase, but not the boot time increase.
For this last point I just execute STM32MP157C-EV1 boot with a patch in configs/stm32mp15_basic_defconfig
(quoted diff) +6
-0+CONFIG_LOGLEVEL=8 +CONFIG_LOG_MAX_LEVEL=8 +CONFIG_LOG_DEFAULT_LEVEL=6 +CONFIG_LOGF_FILE=y +CONFIG_LOGF_LINE=y +CONFIG_LOGF_FUNC=y
Quoted 6 lines
And execute "bootstage report" after the second boot (the first boot is pertubated by env save)
I think the delta is linked to
1/ size of U-Boot (SPL spent more time to load U-Boot)end of SPL 987,579 => 996,117
OK.
Quoted 3 lines
2/ time to check for each debug trace: because I increase the log level
(gd->default_log_level= 6 < MAX_LOG_LEVEL=8)
This might be the biggest part. If you look@_log() it always does the vsprintf() even if in fact log_dispatch() does not dispatch it to anything.
I suspect that could be refactored to move the checking to a separate function, and then call it before doing the expensive vsprintf().
Quoted 3 lines
3/ treatment added in
log_console_emit(some printf) andlog_dispatch (processing_msg / gd->loghead)
Likely this is fast.
Quoted 5 lines
4/ lower cache performancy as trace code are pesent in memory even
they are not usedCan I do some check/experimentation on my side ?
Yes, if you can use the bootstage_start() and bootstage_accum() within the _log() function to measure the total time take in the run.
Regards,
Simon
cover stm32: enable logging features
Hi Simon,
Quoted 30 lines
From: Simon Glass <[email protected]>
Sent: lundi 26 octobre 2020 20:23Hi Patrick,
Quoted 23 lines · Patrick DELAUNAY
Hi Simon,
Quoted 20 lines
From: Simon Glass <[email protected]>
Sent: jeudi 15 octobre 2020 17:06Hi Patrick,
Quoted 9 lines · Patrick Delaunay
This patch-set migrates several stm32 drivers to API compatible with logging features (use dev_...() or log_...() function) and activate the logging features in STM32MP15 boards.
The size of U-Boot increased by 19kB (933026 to 952830 on STM32MP157C-EV1 board for basic defconfig) but the boot time don't change
drastically.
Quoted 1 line
(...)
Quoted 30 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
For information even with all trace embbeded in U-Boot but not activated, MAX_LOG_LEVEL=8 and LOG_DEFAULT_LEVEL=6
Size increase by 190KB (952830 to 1147918) but boot time is stable (1,748s vs 1,696s).
This seems pretty bad. Is this because of console output, or something else? I understand the size increase, but not the boot time
increase.
Quoted 11 lines
For this last point I just execute STM32MP157C-EV1 boot with a patch in configs/stm32mp15_basic_defconfig
(quoted diff) +6
-0+CONFIG_LOGLEVEL=8 +CONFIG_LOG_MAX_LEVEL=8 +CONFIG_LOG_DEFAULT_LEVEL=6 +CONFIG_LOGF_FILE=y +CONFIG_LOGF_LINE=y +CONFIG_LOGF_FUNC=yQuoted 6 lines
And execute "bootstage report" after the second boot (the first boot is pertubated by env save)
I think the delta is linked to
1/ size of U-Boot (SPL spent more time to load U-Boot)end of SPL 987,579 => 996,117OK.
Quoted 1 line
Quoted 5 lines
Quoted 2 lines
2/ time to check for each debug trace: because I increase the log level
(gd->default_log_level= 6 < MAX_LOG_LEVEL=8)This might be the biggest part. If you look at
_log()it always does thevsprintf()even if in factlog_dispatch()does not dispatch it to anything.
Yes, log_dispatch / log_passes_filter are called after vsnprintf
Quoted 2 lines
I suspect that could be refactored to move the checking to a separate function, and then call it before doing the expensive
vsprintf().
Or save va_list, fmt in log_rec and call vsnprintf allow when needed in log_dispatch, just before emit
Quoted 7 lines
Quoted 3 lines
3/ treatment added in
log_console_emit(some printf) andlog_dispatch (processing_msg / gd->loghead)Likely this is fast.
Quoted 1 line
Quoted 7 lines
Quoted 4 lines
4/ lower cache performancy as trace code are pesent in memory even
they are not usedCan I do some check/experimentation on my side ?
Yes, if you can use the
bootstage_start()andbootstage_accum()within the_log()function to measure the total time take in the run.
Ok, I add it in my TODO list
Quoted 2 lines
Regards,
Simon
Regards
Patrick
cover stm32: enable logging features
Hi Patrick,
Quoted 72 lines · Patrick DELAUNAY
Hi Simon,
Quoted 30 lines
From: Simon Glass <[email protected]>
Sent: lundi 26 octobre 2020 20:23Hi Patrick,
Quoted 23 lines · Patrick DELAUNAY
Hi Simon,
Quoted 20 lines
From: Simon Glass <[email protected]>
Sent: jeudi 15 octobre 2020 17:06Hi Patrick,
Quoted 9 lines · Patrick Delaunay
This patch-set migrates several stm32 drivers to API compatible with logging features (use dev_...() or log_...() function) and activate the logging features in STM32MP15 boards.
The size of U-Boot increased by 19kB (933026 to 952830 on STM32MP157C-EV1 board for basic defconfig) but the boot time don't change
drastically.
Quoted 1 line
(...)
Quoted 30 lines
Quoted 8 lines
Quoted 8 lines
Quoted 5 lines
For information even with all trace embbeded in U-Boot but not activated, MAX_LOG_LEVEL=8 and LOG_DEFAULT_LEVEL=6
Size increase by 190KB (952830 to 1147918) but boot time is stable (1,748s vs 1,696s).
This seems pretty bad. Is this because of console output, or something else? I understand the size increase, but not the boot time
increase.
Quoted 11 lines
For this last point I just execute STM32MP157C-EV1 boot with a patch in configs/stm32mp15_basic_defconfig
(quoted diff) +6
-0+CONFIG_LOGLEVEL=8 +CONFIG_LOG_MAX_LEVEL=8 +CONFIG_LOG_DEFAULT_LEVEL=6 +CONFIG_LOGF_FILE=y +CONFIG_LOGF_LINE=y +CONFIG_LOGF_FUNC=yQuoted 6 lines
And execute "bootstage report" after the second boot (the first boot is pertubated by env save)
I think the delta is linked to
1/ size of U-Boot (SPL spent more time to load U-Boot)end of SPL 987,579 => 996,117OK.
Quoted 1 line
Quoted 5 lines
Quoted 2 lines
2/ time to check for each debug trace: because I increase the log level
(gd->default_log_level= 6 < MAX_LOG_LEVEL=8)This might be the biggest part. If you look at
_log()it always does thevsprintf()even if in factlog_dispatch()does not dispatch it to anything.
Quoted 6 lines
Yes,
log_dispatch/log_passes_filterare called after vsnprintfQuoted 2 lines
I suspect that could be refactored to move the checking to a separate function, and then call it before doing the expensive
vsprintf().Or save
va_list, fmt inlog_recand call vsnprintf allow when needed inlog_dispatch, just before emit
Yes that sounds better to me.
Quoted 11 lines
Quoted 11 lines
Quoted 4 lines
3/ treatment added in
log_console_emit(some printf) andlog_dispatch (processing_msg / gd->loghead)Likely this is fast.
Quoted 4 lines
4/ lower cache performancy as trace code are pesent in memory even
they are not used
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Can I do some check/experimentation on my side ?
Yes, if you can use the
bootstage_start()andbootstage_accum()within the_log()function to measure the total time take in the run.Ok, I add it in my TODO list
OK. We really should make logging add the least overhead possible.
Regards,
SImon
cover stm32: enable logging features
Hi Simon,
Quoted 107 lines
From: Simon Glass <[email protected]>
Sent: vendredi 30 octobre 2020 19:16Hi Patrick,
Quoted 74 lines · Patrick DELAUNAY
Hi Simon,
Quoted 31 lines
From: Simon Glass <[email protected]>
Sent: lundi 26 octobre 2020 20:23Hi Patrick,
Quoted 23 lines · Patrick DELAUNAY
Hi Simon,
Quoted 20 lines
From: Simon Glass <[email protected]>
Sent: jeudi 15 octobre 2020 17:06Hi Patrick,
Quoted 9 lines · Patrick Delaunay
This patch-set migrates several stm32 drivers to API compatible with logging features (use dev_...() or log_...() function) and activate the logging features in STM32MP15 boards.
The size of U-Boot increased by 19kB (933026 to 952830 on STM32MP157C-EV1 board for basic defconfig) but the boot time don't change
drastically.
Quoted 1 line
(...)
Quoted 31 lines
Quoted 9 lines
Quoted 9 lines
Quoted 5 lines
For information even with all trace embbeded in U-Boot but not activated, MAX_LOG_LEVEL=8 and LOG_DEFAULT_LEVEL=6
Size increase by 190KB (952830 to 1147918) but boot time is stable (1,748s vs 1,696s).
This seems pretty bad. Is this because of console output, or something else? I understand the size increase, but not the boot time
increase.
Quoted 11 lines
For this last point I just execute STM32MP157C-EV1 boot with a patch in configs/stm32mp15_basic_defconfig
(quoted diff) +6
-0+CONFIG_LOGLEVEL=8 +CONFIG_LOG_MAX_LEVEL=8 +CONFIG_LOG_DEFAULT_LEVEL=6 +CONFIG_LOGF_FILE=y +CONFIG_LOGF_LINE=y +CONFIG_LOGF_FUNC=yQuoted 6 lines
And execute "bootstage report" after the second boot (the first boot is pertubated by env save)
I think the delta is linked to
1/ size of U-Boot (SPL spent more time to load U-Boot)end of SPL 987,579 => 996,117OK.
Quoted 1 line
Quoted 5 lines
Quoted 2 lines
2/ time to check for each debug trace: because I increase the log level
(gd->default_log_level= 6 < MAX_LOG_LEVEL=8)This might be the biggest part. If you look at
_log()it always does thevsprintf()even if in factlog_dispatch()does not dispatch it to anything.Quoted 7 lines
Yes,
log_dispatch/log_passes_filterare called after vsnprintfQuoted 2 lines
I suspect that could be refactored to move the checking to a separate function, and then call it before doing the expensive
vsprintf().Or save
va_list, fmt inlog_recand call vsnprintf allow when needed inlog_dispatch, just before emitYes that sounds better to me.
Quoted 16 lines
Quoted 15 lines
Quoted 4 lines
3/ treatment added in
log_console_emit(some printf) andlog_dispatch (processing_msg / gd->loghead)Likely this is fast.
Quoted 5 lines
4/ lower cache performancy as trace code are pesent in memory even
they are not usedCan I do some check/experimentation on my side ?
Yes, if you can use the
bootstage_start()andbootstage_accum()within the_log()function to measure the total time take in the run.
Quoted 6 lines
Quoted 1 line
Ok, I add it in my TODO list
OK. We really should make logging add the least overhead possible.
Regards,
Simon
I rebase my patchset, tested on stm32mp15_trusted_defconfig (with TF-A load) and no more stm32_basic_defconfgi (with SPL load)
And the cost is now more limited.... (perhaps I made some error in my last tests or I activate too many trace ?).
But I found some improvement on the log features, I will sent booth with updated values next week.
Patrick.
cover stm32: enable logging features
Hi Patrick,
Quoted 114 lines · Patrick DELAUNAY
Hi Simon,
Quoted 111 lines
From: Simon Glass <[email protected]>
Sent: vendredi 30 octobre 2020 19:16Hi Patrick,
Quoted 74 lines · Patrick DELAUNAY
Hi Simon,
Quoted 31 lines
From: Simon Glass <[email protected]>
Sent: lundi 26 octobre 2020 20:23Hi Patrick,
Quoted 23 lines · Patrick DELAUNAY
Hi Simon,
Quoted 20 lines
From: Simon Glass <[email protected]>
Sent: jeudi 15 octobre 2020 17:06Hi Patrick,
Quoted 9 lines · Patrick Delaunay
This patch-set migrates several stm32 drivers to API compatible with logging features (use dev_...() or log_...() function) and activate the logging features in STM32MP15 boards.
The size of U-Boot increased by 19kB (933026 to 952830 on STM32MP157C-EV1 board for basic defconfig) but the boot time don't change
drastically.
Quoted 1 line
(...)
Quoted 31 lines
Quoted 9 lines
Quoted 9 lines
Quoted 5 lines
For information even with all trace embbeded in U-Boot but not activated, MAX_LOG_LEVEL=8 and LOG_DEFAULT_LEVEL=6
Size increase by 190KB (952830 to 1147918) but boot time is stable (1,748s vs 1,696s).
This seems pretty bad. Is this because of console output, or something else? I understand the size increase, but not the boot time
increase.
Quoted 11 lines
For this last point I just execute STM32MP157C-EV1 boot with a patch in configs/stm32mp15_basic_defconfig
(quoted diff) +6
-0+CONFIG_LOGLEVEL=8 +CONFIG_LOG_MAX_LEVEL=8 +CONFIG_LOG_DEFAULT_LEVEL=6 +CONFIG_LOGF_FILE=y +CONFIG_LOGF_LINE=y +CONFIG_LOGF_FUNC=yQuoted 6 lines
And execute "bootstage report" after the second boot (the first boot is pertubated by env save)
I think the delta is linked to
1/ size of U-Boot (SPL spent more time to load U-Boot)end of SPL 987,579 => 996,117OK.
Quoted 1 line
Quoted 5 lines
Quoted 2 lines
2/ time to check for each debug trace: because I increase the log level
(gd->default_log_level= 6 < MAX_LOG_LEVEL=8)This might be the biggest part. If you look at
_log()it always does thevsprintf()even if in factlog_dispatch()does not dispatch it to anything.Quoted 7 lines
Yes,
log_dispatch/log_passes_filterare called after vsnprintfQuoted 2 lines
I suspect that could be refactored to move the checking to a separate function, and then call it before doing the expensive
vsprintf().Or save
va_list, fmt inlog_recand call vsnprintf allow when needed inlog_dispatch, just before emitYes that sounds better to me.
Quoted 11 lines
Quoted 11 lines
Quoted 4 lines
3/ treatment added in
log_console_emit(some printf) andlog_dispatch (processing_msg / gd->loghead)Likely this is fast.
Quoted 4 lines
4/ lower cache performancy as trace code are pesent in memory even
they are not usedQuoted 6 lines
Quoted 4 lines
Quoted 1 line
Can I do some check/experimentation on my side ?
Yes, if you can use the
bootstage_start()andbootstage_accum()within the_log()function to measure the total time take in the run.Ok, I add it in my TODO list
OK. We really should make logging add the least overhead possible.
Quoted 8 lines
Quoted 2 lines
Regards,
SimonI rebase my patchset, tested on
stm32mp15_trusted_defconfig(with TF-A load) and no morestm32_basic_defconfgi(with SPL load)And the cost is now more limited.... (perhaps I made some error in my last tests or I activate too many trace ?).
Definitely tracing adds to the time. But that's good news!
Quoted 3 lines
But I found some improvement on the log features, I will sent booth with updated values next week.
Great, thanks. More people will use logging if the overhead is small.
Regards,
Simon