Initial attempt at flashing instructions.
v3 cover Initial attempt at flashing instructions.
From: Drew Moseley <[email protected]>
* V3:
Cleanup README.
Add CHIP_UBI_PAGE_SIZE variable to reuse the data from the machine configuration.
* V2:
Updated README and layer dependencies.
Added error checking to flashing script
* V1:
This set of patches adds the native tools and target components needed to reflash the CHIP boards. Additionally a shell script is added to the deploy directory showing how to kick off a flash update. It's not ideal as I've hardcoded a max size for the UBI image into the script and didn't see much of an alternative. It does function though.
Drew
The following changes since commit 0079e6ac10fc371d6f527270c23b887561f717aa:
chip: Append to MACHINE_EXTRA_RRECOMMENDS rather than overwriting (2017-06-15 13:37:19 +0100)
are available in the git repository at:
[email protected]:drewmoseley/meta-chip.git flashing-instructions-v3
for you to fetch changes up to 69920ec23cef400687a2a8c1ab1a825a911278d2:
chip: Add chip-u-boot-scr recipe and flash script (2017-06-28 19:06:01 -0400)
----------------------------------------------------------------
Drew Moseley (4):
chip: Make page size into a variable.
u-boot-chip: Deploy the sunxi-spl-with-ecc.bin file.
chip: Build sunxi-tools-native.
chip: Add chip-u-boot-scr recipe and flash script
README | 94 ++++++++++++++++++++++++- conf/layer.conf | 3 + conf/machine/chip.conf | 8 ++- recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb | 89 +++++++++++++++++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.full | 32 +++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.in | 43 +++++++++++ recipes-bsp/u-boot/u-boot-chip_git.bb | 7 ++ 7 files changed, 272 insertions(+), 4 deletions(-) create mode 100644 recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.full create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.in
Drew Moseley (4):
chip: Make page size into a variable.
u-boot-chip: Deploy the sunxi-spl-with-ecc.bin file.
chip: Build sunxi-tools-native.
chip: Add chip-u-boot-scr recipe and flash script
README | 94 ++++++++++++++++++++++++- conf/layer.conf | 3 + conf/machine/chip.conf | 8 ++- recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb | 89 +++++++++++++++++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.full | 32 +++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.in | 43 +++++++++++ recipes-bsp/u-boot/u-boot-chip_git.bb | 7 ++ 7 files changed, 272 insertions(+), 4 deletions(-) create mode 100644 recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.full create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.in
Signature · 1 line
2.7.4
PATCH v3 1/4 chip: Make page size into a variable.
From: Drew Moseley <[email protected]>
--- conf/machine/chip.conf | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
conf/machine/chip.conf +3 -2
@@ -30,5 +30,6 @@ MACHINE_FEATURES = "usbgadget usbhost wifi" MACHINE_EXTRA_RRECOMMENDS += "kernel-module-r8723bs rtl8723bs" UBI_VOLNAME = "rootfs" -MKUBIFS_ARGS = "--min-io-size 16384 --leb-size 2064384 --max-leb-cnt 2000" -UBINIZE_ARGS = "--min-io-size 16384 --peb-size 2097152 --sub-page-size 16384" +CHIP_UBI_PAGE_SIZE = "16384" +MKUBIFS_ARGS = "--min-io-size ${CHIP_UBI_PAGE_SIZE} --leb-size 2064384 --max-leb-cnt 2000" +UBINIZE_ARGS = "--min-io-size ${CHIP_UBI_PAGE_SIZE} --peb-size 2097152 --sub-page-size 16384"
Signature · 1 line
2.7.4
PATCH v3 2/4 u-boot-chip: Deploy the sunxi-spl-with-ecc.bin file.
In reply to [email protected]From: Drew Moseley <[email protected]>
--- conf/machine/chip.conf | 1 + recipes-bsp/u-boot/u-boot-chip_git.bb | 6 ++++++ 2 files changed, 7 insertions(+)
conf/machine/chip.conf +1 -0
@@ -21,6 +21,7 @@ KERNEL_IMAGETYPE = "zImage" KERNEL_DEVICETREE = "sun5i-r8-chip.dtb" SPL_BINARY = "sunxi-spl.bin" +SPL_ECC_BINARY = "sunxi-spl-with-ecc.bin" UBOOT_BINARY = "u-boot-dtb.bin" UBOOT_MACHINE = "CHIP_defconfig"
recipes-bsp/u-boot/u-boot-chip_git.bb +6 -0
@@ -19,7 +19,13 @@ SRC_URI = " \ S = "${WORKDIR}/git" do_compile_append() { + install ${B}/spl/${SPL_ECC_BINARY} ${B}/${SPL_ECC_BINARY} install ${B}/spl/${SPL_BINARY} ${B}/${SPL_BINARY} } COMPATIBLE_MACHINE = "chip" + +do_deploy_append() { + install -m 644 ${B}/${SPL_ECC_BINARY} ${DEPLOYDIR}/${SPL_ECC_BINARY}-${PV}-${PR} + ln -sf ${SPL_ECC_BINARY}-${PV}-${PR} ${DEPLOYDIR}/${SPL_ECC_BINARY} +}
Signature · 1 line
2.7.4
PATCH v3 3/4 chip: Build sunxi-tools-native.
In reply to [email protected]From: Drew Moseley <[email protected]>
Add LAYERDEPENDS on meta-sunxi and add the sunxi-tools-native pacakage to EXTRA_IMAGEDEPENDS.
--- README | 3 +++ conf/layer.conf | 3 +++ conf/machine/chip.conf | 2 +- 3 files changed, 7 insertions(+), 1 deletion(-)
README +3 -0
@@ -14,6 +14,9 @@ This layer depends on: layers: meta branch: master + URI: git://github.com/linux-sunxi/meta-sunxi.git + branch: master + Patches =======
conf/layer.conf +3 -0
@@ -8,3 +8,6 @@ BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \ BBFILE_COLLECTIONS += "meta-chip" BBFILE_PATTERN_meta-chip = "^${LAYERDIR}/" BBFILE_PRIORITY_meta-chip = "6" + +# Add this to get access to sunxi-tools recipe +LAYERDEPENDS_meta-chip = "meta-sunxi"
conf/machine/chip.conf +1 -1
@@ -5,7 +5,7 @@ MACHINE_EXTRA_RRECOMMENDS = " kernel-modules" MACHINE_ESSENTIAL_EXTRA_RDEPENDS = " kernel-image kernel-devicetree" -EXTRA_IMAGEDEPENDS += "u-boot" +EXTRA_IMAGEDEPENDS += "u-boot sunxi-tools-native" DEFAULTTUNE ?= "cortexa8t-neon" include conf/machine/include/tune-cortexa8.inc
Signature · 1 line
2.7.4
PATCH v3 4/4 chip: Add chip-u-boot-scr recipe and flash script
In reply to [email protected]From: Drew Moseley <[email protected]>
Add a U-Boot script to handle flashing the SPL, U-Boot and UBI root filesystem images into the onboard flash. Also generate a script showing how to execute the flash steps.
--- README | 91 ++++++++++++++++++++++++- recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb | 89 ++++++++++++++++++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.full | 32 +++++++++ recipes-bsp/chip-u-boot-scr/files/boot.cmd.in | 43 ++++++++++++ recipes-bsp/u-boot/u-boot-chip_git.bb | 1 + 5 files changed, 255 insertions(+), 1 deletion(-) create mode 100644 recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.full create mode 100644 recipes-bsp/chip-u-boot-scr/files/boot.cmd.in
README +90 -1
@@ -62,4 +62,93 @@ To build a machine supported by this BSP layer follow the next steps: II. Flashing a C.H.I.P. board ======================================== -<TODO> +As part of the build including this BSP layer, a U-Boot script and a +shell script are created to assist in flashing your images to the CHIP +board. Note that this script assumes a maximum size for your UBI +image of 167772160 (0x0A000000) bytes. If your UBI image exceeds +that, then you will need to adapt this to your environment. + +To successfully run this script you will first need to set your board +into FEL mode. Insert a wire into the U14 header between pin 7 (FEL) +and GND. Then connect the board with a USB cable to your host. More +details here: + https://docs.getchip.com/chip.html#flash-chip-with-an-os + +You need to specify the base filename of your UBI image using the +UBI_IMAGE shell variable before invoking the generated script as +follows: + +# UBI_IMAGE=chip-hwup-image-chip.ubi \ + ./tmp/deploy/images/chip/flash_CHIP_board.sh + +This script will take some time to execute. The output of this script +as run on your host machine should look similar to the following: + + # UBI_IMAGE=chip-hwup-image-chip.ubi ./tmp/deploy/images/chip/flash_CHIP_board.sh + 100% [================================================] 3537 kB, 513.9 kB/s + 100% [================================================] 619 kB, 551.1 kB/s + 100% [================================================] 2 kB, 476.0 kB/s + 100% [================================================] 71303 kB, 531.1 kB/s + +If you have a serial console connected to your board, you will see +progress and a message on the console indicating when flashing is +complete: + + U-Boot 2016.01 (Jun 20 2017 - 02:54:42 -0400) Allwinner Technology + + CPU: Allwinner A13 (SUN5I) + I2C: ready + DRAM: 512 MiB + NAND: 8192 MiB + video-mode 720x480-24@60 not available, falling back to 1024x768-24@60 + Setting up a 720x480i composite-ntsc console (overscan 40x20) + In: serial + Out: serial + Err: serial + Net: usb_ether + starting USB... + No controllers found + Hit any key to stop autoboot: 0 + (FEL boot) + ## Executing script at 43100000 + Erasing NAND + + NAND erase.chip: device 0 whole chip + Skipping bad block at 0xeb000000 + Skipping bad block at 0x1b1000000 + Erasing at 0x1ffc00000 -- 100% complete. + OK + Writing SPL (with ECC) to NAND address 0x00000000 + + NAND write: 3537408 bytes written: OK + Writing SPL (with ECC) to NAND address 0x400000 + + NAND write: 3537408 bytes written: OK + Writing UBoot image to address 0x800000 + + NAND write: device 0 offset 0x800000, size 0x97236 + 619062 bytes written: OK + Enabling Splash + Setting Video Mode + Saving default environment + Saving Environment to NAND... + Erasing NAND... + Erasing at 0xc00000 -- 100% complete. + Writing to NAND... OK + Writing UBI rootfs to NAND address 0x1000000 + + NAND write: device 0 offset 0x1000000, size 0xa000000 + 167772160 bytes written: OK + =========================================================== + Flashing Complete. Please power down and disable FEL mode. + =========================================================== + +Additionally, once the image is properly flashed, the status LED on +the CHIP board will flash on and off every 2 seconds. This indicates +that it is safe to power down your board and disable FEL mode. + +WARNING: This will erase the entire contents of your CHIP board. + +NOTE: This setup is still compatible with the CHIP flashing utility +available at http://flash.getchip.com if you choose to reinstall the +stock images.
recipes-bsp/chip-u-boot-scr/chip-u-boot-scr.bb new file +89 -0
89 lines not on this page · raw message
recipes-bsp/chip-u-boot-scr/files/boot.cmd.full new file +32 -0
@@ -0,0 +1,32 @@ +echo Scrubbing NAND +nand scrub -y 0x0 0x200000000 +echo Writing SPL (with ECC) to NAND address 0x0 +nand write.raw.noverify $SPL_MEM_ADDR 0x0 $PADDED_SPL_SIZE +echo Writing SPL (with ECC) to NAND address 0x400000 +nand write.raw.noverify $SPL_MEM_ADDR 0x400000 $PADDED_SPL_SIZE +echo Writing UBoot image to address 0x800000 +nand write $UBOOT_MEM_ADDR 0x800000 $PADDED_UBOOT_SIZE + +# Setup the default environment +setenv bootargs root=ubi0:rootfs rootfstype=ubifs rw earlyprintk ubi.mtd=4 +setenv bootcmd 'mtdparts; ubi part UBI; ubifsmount ubi0:rootfs; ubifsload \$fdt_addr_r /boot/sun5i-r8-chip.dtb; ubifsload \$kernel_addr_r /boot/zImage; bootz \$kernel_addr_r - \$fdt_addr_r' +setenv fel_booted 0 + +echo Enabling Splash +setenv stdout serial +setenv stderr serial +setenv splashpos m,m + +echo Setting Video Mode +setenv video-mode sunxi:640x480-24@60,monitor=composite-ntsc,overscan_x=40,overscan_y=20 + +echo Saving default environment +saveenv + +echo Writing UBI rootfs to NAND address 0x1000000 +nand write.slc-mode.trimffs $UBI_MEM_ADDR 0x1000000 $UBI_SIZE + +echo =========================================================== +echo Flashing Complete. Please power down and disable FEL mode. +echo =========================================================== +
recipes-bsp/chip-u-boot-scr/files/boot.cmd.in new file +43 -0
43 lines not on this page · raw message
recipes-bsp/u-boot/u-boot-chip_git.bb +1 -0
@@ -6,6 +6,7 @@ LIC_FILES_CHKSUM = "file://Licenses/README;md5=0507cd7da8e7ad6d6701926ec9b84c95" DEPENDS += "dtc-native" PROVIDES += "u-boot" +RDEPENDS_${PN}_append_chip = " chip-u-boot-scr" UBOOT_VERSION ?= "2016.01" PV = "${UBOOT_VERSION}+git${SRCPV}"
Signature · 1 line
2.7.4
Andrei Gherzan
AppliedHi,
Quoted 9 lines · On Thu, Jun 29, 2017 at 2:12 AM, <[email protected]> wrote:
From: Drew Moseley <[email protected]>
* V3:
Cleanup README.
Add
CHIP_UBI_PAGE_SIZEvariable to reuse the data from the machine configuration.
Merged to master. Thanks, Drew.
Andrei