Skip to contentSkip to conversation

stmmac: Add Loongson platform support

PATCH Superseded Yanteng Si 4 participants 15 messages Apr 9, 2024 – Apr 11, 2024

Subsystems (5)

v10 of 17 Superseded Latest is v17 →

lore
Share & tools
lore

Yanteng Si

author
#0 lore raw

v10 cover stmmac: Add Loongson platform support

v10:
As Andrew's comment:
* Add a #define for the 0x37.
* Add a #define for Port Select.

others:
* Pick Serge's patch, This patch resulted from the process of reviewing our patch set.
* Based on Serge's patch, modify our loongson_phylink_get_caps().
* Drop patch 3/6, we need mac_interface.
* Adjusted the code layout of gnet patch.
* Corrected several errata in commit message.
* Move DISABLE_FORCE flag to loongson_gnet_data().

v9:
We have not provided a detailed list of equipment for a long time, and I apologize for this. During this period, I have collected some information and now present it to you, hoping to alleviate the pressure of review.

1. IP core
We now have two types of IP cores, one is 0x37, similar to dwmac1000; The other is 0x10. Compared to 0x37, we split several DMA registers from one to two, and it is not worth adding a new entry for this. According to Serge's comment, we made these devices work by overwriting priv->synopsys_id = 0x37 and mac->dma = <LS_dma_ops>.

1.1. Some more detailed information
The number of DMA channels for 0x37 is 1; The number of DMA channels for 0x10 is 8. Except for channel 0, otherchannels do not support sending hardware checksums. Supported AV features are Qav, Qat, and Qas, and the rest are consistent with 3.73.

2. DEVICE
We have two types of devices,
one is GMAC, which only has a MAC chip inside and needs an external PHY chip;
the other is GNET, which integrates both MAC and PHY chips inside.

2.1. Some more detailed information
GMAC device: LS7A1000, LS2K1000, these devices do not support any pause mode.
gnet device: LS7A2000, LS2K2000, the chip connection between the mac and
phy of these devices is not normal and requires two rounds of negotiation; LS7A2000 does not support half-duplex and
multi-channel;
to enable multi-channel on LS2K2000, you need to turn off
hardware checksum.
**Note**: Only the LS2K2000's IP core is 0x10, while the IP cores of other devices are 0x37.

3. TABLE

device    type    pci_id    ip_core
ls7a1000  gmac    7a03      0x35/0x37
ls2k1000  gmac    7a03      0x35/0x37
ls7a2000  gnet    7a13      0x37
ls2k2000  gnet    7a13      0x10

-----------------------------------------------
Changes:

* passed the CI
<https://github.com/linux-netdev/nipa/blob/main/tests/patch/checkpatch
/checkpatch.sh>
* reverse xmas tree order.
* Silence build warning.
* Re-split the patch.
* Add more detailed commit message.
* Add more code comment.
* Reduce modification of generic code.
* using the GNET-specific prefix.
* define a new macro for the GNET MAC.
* Use an easier way to overwrite mac.
* Removed some useless printk.

v8:
* The biggest change is according to Serge's comment in the previous edition:
Seeing the patch in the current state would overcomplicate the generic code and the only functions you need to update are dwmac_dma_interrupt()
dwmac1000_dma_init_channel()
you can have these methods re-defined with all the Loongson GNET specifics in the low-level platform driver (dwmac-loongson.c). After that you can just override the mac_device_info.dma pointer with a fixed stmmac_dma_ops descriptor. Here is what should be done for that:

1. Keep the Patch 4/9 with my comments fixed. First it will be partly useful for your GNET device. Second in general it's a correct implementation of the normal DW GMAC v3.x multi-channels feature and will be useful for the DW GMACs with that feature enabled.

2. Create the Loongson GNET-specific stmmac_dma_ops.dma_interrupt()
stmmac_dma_ops.init_chan()
methods in the dwmac-loongson.c driver. Don't forget to move all the Loongson-specific macros from dwmac_dma.h to dwmac-loongson.c.

3. Create a Loongson GNET-specific platform setup method with the next semantics:
+ allocate stmmac_dma_ops instance and initialize it with dwmac1000_dma_ops.
+ override the stmmac_dma_ops.{dma_interrupt, init_chan} with the pointers to the methods defined in 2.
+ allocate mac_device_info instance and initialize the mac_device_info.dma field with a pointer to the new stmmac_dma_ops instance.
+ call dwmac1000_setup() or initialize mac_device_info in a way it's done in dwmac1000_setup() (the later might be better so you wouldn't need to export the dwmac1000_setup() function).
+ override stmmac_priv.synopsys_id with a correct value.

4. Initialize plat_stmmacenet_data.setup() with the pointer to the method created in 3.

* Others:
Re-split the patch.
Passed checkpatch.pl test.

v7:
* Refer to andrew's suggestion:
- Add DMA_INTR_ENA_NIE_RX and DMA_INTR_ENA_NIE_TX #define's, etc.

* Others:
- Using --subject-prefix="PATCH net-next vN" to indicate that the patches are for the networking tree.
- Rebase to the latest networking tree:
<git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git>

v6:

* Refer to Serge's suggestion:
- Add new platform feature flag:

    include/linux/stmmac.h:
    +#define STMMAC_FLAG_HAS_LGMAC			BIT(13)

- Add the IRQs macros specific to the Loongson Multi-channels GMAC:

     drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h:
     +#define DMA_INTR_ENA_NIE_LOONGSON 0x00060000      /* ...*/
     #define DMA_INTR_ENA_NIE 0x00010000	/* Normal Summary */
     ...

- Drop all of redundant changes that don't require the prototypes being converted to accepting the stmmac_priv pointer.

* Refer to andrew's suggestion:
- Drop white space changes.
- break patch up into lots of smaller parts.
Some small patches have been put into another series as a preparation see <https://lore.kernel.org/loongarch/[email protected]/T/#t>

*note* : This series of patches relies on the three small patches above.
* others
- Drop irq_flags changes.
- Changed patch order.

v4 -> v5:

* Remove an ugly and useless patch (fix channel number).
* Remove the non-standard dma64 driver code, and also remove the HWIF entries, since the associated custom callbacks no longer exist.
* Refer to Serge's suggestion: Update the dwmac1000_dma.c to support the multi-DMA-channels controller setup.

See:
v4: <https://lore.kernel.org/loongarch/[email protected]/>
v3: <https://lore.kernel.org/loongarch/[email protected]/>
v2: <https://lore.kernel.org/loongarch/[email protected]/>
v1: <https://lore.kernel.org/loongarch/[email protected]/>

Serge Semin (1):
net: stmmac: Move all PHYLINK MAC capabilities initializations to
MAC-specific setup methods

Yanteng Si (5):
net: stmmac: Add multi-channel support
net: stmmac: dwmac-loongson: Use PCI_DEVICE_DATA() macro for device
identification
net: stmmac: dwmac-loongson: Introduce GMAC setup
net: stmmac: dwmac-loongson: Add full PCI support
net: stmmac: dwmac-loongson: Add Loongson GNET support

 drivers/net/ethernet/stmicro/stmmac/common.h  |   3 +
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 570 ++++++++++++++++--
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c |   6 +-
 .../ethernet/stmicro/stmmac/dwmac1000_core.c  |   2 +
 .../ethernet/stmicro/stmmac/dwmac1000_dma.c   |  35 +-
 .../ethernet/stmicro/stmmac/dwmac100_core.c   |   2 +
 .../ethernet/stmicro/stmmac/dwmac100_dma.c    |   2 +-
 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |   8 +-
 .../net/ethernet/stmicro/stmmac/dwmac4_dma.c  |   2 +-
 .../net/ethernet/stmicro/stmmac/dwmac_dma.h   |  20 +-
 .../net/ethernet/stmicro/stmmac/dwmac_lib.c   |  32 +-
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   |  15 +-
 .../ethernet/stmicro/stmmac/dwxgmac2_dma.c    |   2 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |   5 +-
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  |   6 +
 .../net/ethernet/stmicro/stmmac/stmmac_main.c |  54 +-
 include/linux/stmmac.h                        |   2 +
 17 files changed, 623 insertions(+), 143 deletions(-)
Signature · 1 line
2.31.4
author
#1 lore raw

PATCH v10 1/6 net: stmmac: Move all PHYLINK MAC capabilities initializations to MAC-specific setup methods

From: Serge Semin <[email protected]>

Seeing the Tx-queues-based constraint is DW QoS Eth-specific there is such reason. It might be better to move the selective Half-duplex mode disabling to the MAC-specific callback.

But there are a better option to implement the MAC capabilities detection procedure. Let's see what MAC-capabilities can be currently specified based on the DW MAC IP-core versions:

DW MAC100: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |

	   MAC_10 | MAC_100

DW GMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |

         MAC_10 | MAC_100 | MAC_1000

DW QoS Eth: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |

            MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD
but if the amount of the active Tx queues is > 1, then:
	   MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
           MAC_10FD | MAC_100FD | MAC_1000FD | MAC_2500FD

DW XGMAC: MAC_ASYM_PAUSE | MAC_SYM_PAUSE |

          MAC_1000FD | MAC_2500FD | MAC_5000FD |
          MAC_10000FD | MAC_25000FD |
          MAC_40000FD | MAC_50000FD |
          MAC_100000FD

As you can see there are only two common capabilities:
MAC_ASYM_PAUSE | MAC_SYM_PAUSE. Seeing the flow-control is implemented as a callback for each MAC IP-core (see dwmac100_flow_ctrl(), dwmac1000_flow_ctrl(), sun8i_dwmac_flow_ctrl(), etc) we can freely move all the PHYLINK MAC capabilities initializations to the MAC-specific setup methods.

After that the only IP-core which requires the capabilities update will be DW QoS Eth. So the Tx-queue-based capabilities update can be moved there and the rest of the xgmac_phylink_get_caps() callback can be dropped.

We can go further. Instead of calling the stmmac_set_half_duplex()/stmmac_set_mac_capabilties() methods on the device init and queues reinit stages, we can move their bodies into the phylink:mac_get_caps() callback.

Others see:
<https://lore.kernel.org/netdev/cover.1706601050.git.siyanteng@loong
son.cn/T/#m7d724d33faee34fed696e4458d9f6b09b0572e77>

---
 drivers/net/ethernet/stmicro/stmmac/common.h  |  1 +
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c |  2 +
 .../ethernet/stmicro/stmmac/dwmac1000_core.c  |  2 +
 .../ethernet/stmicro/stmmac/dwmac100_core.c   |  2 +
 .../net/ethernet/stmicro/stmmac/dwmac4_core.c |  8 +++-
 .../ethernet/stmicro/stmmac/dwxgmac2_core.c   | 15 +++----
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 43 ++++++++-----------
 7 files changed, 36 insertions(+), 37 deletions(-)
drivers/net/ethernet/stmicro/stmmac/common.h +1 -0
index f55cf09f0783..9cd62b2110a1 100644
@@ -553,6 +553,7 @@ extern const struct stmmac_hwtimestamp stmmac_ptp;
 extern const struct stmmac_mode_ops dwmac4_ring_mode_ops;
 
 struct mac_link {
+	u32 caps;
 	u32 speed_mask;
 	u32 speed10;
 	u32 speed100;
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +2 -0
index b21d99faa2d0..e1b761dcfa1d 100644
@@ -1096,6 +1096,8 @@ static struct mac_device_info *sun8i_dwmac_setup(void *ppriv)
 
 	priv->dev->priv_flags |= IFF_UNICAST_FLT;
 
+	mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+			 MAC_10 | MAC_100 | MAC_1000;
 	/* The loopback bit seems to be re-set when link change
 	 * Simply mask it each time
 	 * Speed 10/100/1000 are set in BIT(2)/BIT(3)
drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +2 -0
index 3927609abc44..8555299443f4 100644
@@ -539,6 +539,8 @@ int dwmac1000_setup(struct stmmac_priv *priv)
 	if (mac->multicast_filter_bins)
 		mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
 
+	mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+			 MAC_10 | MAC_100 | MAC_1000;
 	mac->link.duplex = GMAC_CONTROL_DM;
 	mac->link.speed10 = GMAC_CONTROL_PS;
 	mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c +2 -0
index a6e8d7bd9588..7667d103cd0e 100644
@@ -175,6 +175,8 @@ int dwmac100_setup(struct stmmac_priv *priv)
 	dev_info(priv->device, "\tDWMAC100\n");
 
 	mac->pcsr = priv->ioaddr;
+	mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+			 MAC_10 | MAC_100;
 	mac->link.duplex = MAC_CONTROL_F;
 	mac->link.speed10 = 0;
 	mac->link.speed100 = 0;
drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +7 -1
index cef25efbdff9..70a4ac16d3c8 100644
@@ -70,7 +70,11 @@ static void dwmac4_core_init(struct mac_device_info *hw,
 
 static void dwmac4_phylink_get_caps(struct stmmac_priv *priv)
 {
-	priv->phylink_config.mac_capabilities |= MAC_2500FD;
+	/* Half-Duplex can only work with single tx queue */
+	if (priv->plat->tx_queues_to_use > 1)
+		priv->hw->link.caps &= ~(MAC_10HD | MAC_100HD | MAC_1000HD);
+	else
+		priv->hw->link.caps |= (MAC_10HD | MAC_100HD | MAC_1000HD);
 }
 
 static void dwmac4_rx_queue_enable(struct mac_device_info *hw,
@@ -1378,6 +1382,8 @@ int dwmac4_setup(struct stmmac_priv *priv)
 	if (mac->multicast_filter_bins)
 		mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
 
+	mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+			 MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD;
 	mac->link.duplex = GMAC_CONFIG_DM;
 	mac->link.speed10 = GMAC_CONFIG_PS;
 	mac->link.speed100 = GMAC_CONFIG_FES | GMAC_CONFIG_PS;
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +5 -10
index e841e312077e..759b9b7a2f3f 100644
@@ -47,14 +47,6 @@ static void dwxgmac2_core_init(struct mac_device_info *hw,
 	writel(XGMAC_INT_DEFAULT_EN, ioaddr + XGMAC_INT_EN);
 }
 
-static void xgmac_phylink_get_caps(struct stmmac_priv *priv)
-{
-	priv->phylink_config.mac_capabilities |= MAC_2500FD | MAC_5000FD |
-						 MAC_10000FD | MAC_25000FD |
-						 MAC_40000FD | MAC_50000FD |
-						 MAC_100000FD;
-}
-
 static void dwxgmac2_set_mac(void __iomem *ioaddr, bool enable)
 {
 	u32 tx = readl(ioaddr + XGMAC_TX_CONFIG);
@@ -1540,7 +1532,6 @@ static void dwxgmac3_fpe_configure(void __iomem *ioaddr, struct stmmac_fpe_cfg *
 
 const struct stmmac_ops dwxgmac210_ops = {
 	.core_init = dwxgmac2_core_init,
-	.phylink_get_caps = xgmac_phylink_get_caps,
 	.set_mac = dwxgmac2_set_mac,
 	.rx_ipc = dwxgmac2_rx_ipc,
 	.rx_queue_enable = dwxgmac2_rx_queue_enable,
@@ -1601,7 +1592,6 @@ static void dwxlgmac2_rx_queue_enable(struct mac_device_info *hw, u8 mode,
 
 const struct stmmac_ops dwxlgmac2_ops = {
 	.core_init = dwxgmac2_core_init,
-	.phylink_get_caps = xgmac_phylink_get_caps,
 	.set_mac = dwxgmac2_set_mac,
 	.rx_ipc = dwxgmac2_rx_ipc,
 	.rx_queue_enable = dwxlgmac2_rx_queue_enable,
@@ -1698,6 +1688,11 @@ int dwxlgmac2_setup(struct stmmac_priv *priv)
 	if (mac->multicast_filter_bins)
 		mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
 
+	mac->link.caps = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
+			 MAC_1000FD | MAC_2500FD | MAC_5000FD |
+			 MAC_10000FD | MAC_25000FD |
+			 MAC_40000FD | MAC_50000FD |
+			 MAC_100000FD;
 	mac->link.duplex = 0;
 	mac->link.speed1000 = XLGMAC_CONFIG_SS_1000;
 	mac->link.speed2500 = XLGMAC_CONFIG_SS_2500;
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +17 -26

79 lines not on this page · raw message

Signature · 1 line
2.31.4
author
#2 lore raw

PATCH v10 2/6 net: stmmac: Add multi-channel support

In reply to Yanteng Si

DW GMAC v3.x multi-channels feature is implemented as multiple sets of the same CSRs. Here is only preliminary support, it will be useful for the driver further evolution and for the users having multi-channel DWGMAC v3.x devices.

---
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c |  4 +--
 .../ethernet/stmicro/stmmac/dwmac1000_dma.c   | 34 ++++++++++---------
 .../ethernet/stmicro/stmmac/dwmac100_dma.c    |  2 +-
 .../net/ethernet/stmicro/stmmac/dwmac4_dma.c  |  2 +-
 .../net/ethernet/stmicro/stmmac/dwmac_dma.h   | 20 +++++++++--
 .../net/ethernet/stmicro/stmmac/dwmac_lib.c   | 32 ++++++++---------
 .../ethernet/stmicro/stmmac/dwxgmac2_dma.c    |  2 +-
 drivers/net/ethernet/stmicro/stmmac/hwif.h    |  5 ++-
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  |  6 ++++
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +++---
 include/linux/stmmac.h                        |  1 +
 11 files changed, 71 insertions(+), 48 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +2 -2
index e1b761dcfa1d..cc93f73a380e 100644
@@ -299,7 +299,7 @@ static int sun8i_dwmac_dma_reset(void __iomem *ioaddr)
  * Called from stmmac via stmmac_dma_ops->init
  */
 static void sun8i_dwmac_dma_init(void __iomem *ioaddr,
-				 struct stmmac_dma_cfg *dma_cfg, int atds)
+				 struct stmmac_dma_cfg *dma_cfg)
 {
 	writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN);
 	writel(0x1FFFFFF, ioaddr + EMAC_INT_STA);
@@ -395,7 +395,7 @@ static void sun8i_dwmac_dma_start_tx(struct stmmac_priv *priv,
 	writel(v, ioaddr + EMAC_TX_CTL1);
 }
 
-static void sun8i_dwmac_enable_dma_transmission(void __iomem *ioaddr)
+static void sun8i_dwmac_enable_dma_transmission(void __iomem *ioaddr, u32 chan)
 {
 	u32 v;
 
drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +18 -16
index daf79cdbd3ec..f161ec9ac490 100644
@@ -70,15 +70,17 @@ static void dwmac1000_dma_axi(void __iomem *ioaddr, struct stmmac_axi *axi)
 	writel(value, ioaddr + DMA_AXI_BUS_MODE);
 }
 
-static void dwmac1000_dma_init(void __iomem *ioaddr,
-			       struct stmmac_dma_cfg *dma_cfg, int atds)
+static void dwmac1000_dma_init_channel(struct stmmac_priv *priv,
+				       void __iomem *ioaddr,
+				       struct stmmac_dma_cfg *dma_cfg, u32 chan)
 {
-	u32 value = readl(ioaddr + DMA_BUS_MODE);
 	int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
 	int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
+	u32 value;
 
-	/*
-	 * Set the DMA PBL (Programmable Burst Length) mode.
+	value = readl(ioaddr + DMA_CHAN_BUS_MODE(chan));
+
+	/* Set the DMA PBL (Programmable Burst Length) mode.
 	 *
 	 * Note: before stmmac core 3.50 this mode bit was 4xPBL, and
 	 * post 3.5 mode bit acts as 8*PBL.
@@ -98,16 +100,16 @@ static void dwmac1000_dma_init(void __iomem *ioaddr,
 	if (dma_cfg->mixed_burst)
 		value |= DMA_BUS_MODE_MB;
 
-	if (atds)
+	if (dma_cfg->atds)
 		value |= DMA_BUS_MODE_ATDS;
 
 	if (dma_cfg->aal)
 		value |= DMA_BUS_MODE_AAL;
 
-	writel(value, ioaddr + DMA_BUS_MODE);
+	writel(value, ioaddr + DMA_CHAN_BUS_MODE(chan));
 
 	/* Mask interrupts by writing to CSR7 */
-	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_INTR_ENA);
+	writel(DMA_INTR_DEFAULT_MASK, ioaddr + DMA_CHAN_INTR_ENA(chan));
 }
 
 static void dwmac1000_dma_init_rx(struct stmmac_priv *priv,
@@ -116,7 +118,7 @@ static void dwmac1000_dma_init_rx(struct stmmac_priv *priv,
 				  dma_addr_t dma_rx_phy, u32 chan)
 {
 	/* RX descriptor base address list must be written into DMA CSR3 */
-	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_RCV_BASE_ADDR);
+	writel(lower_32_bits(dma_rx_phy), ioaddr + DMA_CHAN_RCV_BASE_ADDR(chan));
 }
 
 static void dwmac1000_dma_init_tx(struct stmmac_priv *priv,
@@ -125,7 +127,7 @@ static void dwmac1000_dma_init_tx(struct stmmac_priv *priv,
 				  dma_addr_t dma_tx_phy, u32 chan)
 {
 	/* TX descriptor base address list must be written into DMA CSR4 */
-	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_TX_BASE_ADDR);
+	writel(lower_32_bits(dma_tx_phy), ioaddr + DMA_CHAN_TX_BASE_ADDR(chan));
 }
 
 static u32 dwmac1000_configure_fc(u32 csr6, int rxfifosz)
@@ -153,7 +155,7 @@ static void dwmac1000_dma_operation_mode_rx(struct stmmac_priv *priv,
 					    void __iomem *ioaddr, int mode,
 					    u32 channel, int fifosz, u8 qmode)
 {
-	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+	u32 csr6 = readl(ioaddr + DMA_CHAN_CONTROL(channel));
 
 	if (mode == SF_DMA_MODE) {
 		pr_debug("GMAC: enable RX store and forward mode\n");
@@ -175,14 +177,14 @@ static void dwmac1000_dma_operation_mode_rx(struct stmmac_priv *priv,
 	/* Configure flow control based on rx fifo size */
 	csr6 = dwmac1000_configure_fc(csr6, fifosz);
 
-	writel(csr6, ioaddr + DMA_CONTROL);
+	writel(csr6, ioaddr + DMA_CHAN_CONTROL(channel));
 }
 
 static void dwmac1000_dma_operation_mode_tx(struct stmmac_priv *priv,
 					    void __iomem *ioaddr, int mode,
 					    u32 channel, int fifosz, u8 qmode)
 {
-	u32 csr6 = readl(ioaddr + DMA_CONTROL);
+	u32 csr6 = readl(ioaddr + DMA_CHAN_CONTROL(channel));
 
 	if (mode == SF_DMA_MODE) {
 		pr_debug("GMAC: enable TX store and forward mode\n");
@@ -209,7 +211,7 @@ static void dwmac1000_dma_operation_mode_tx(struct stmmac_priv *priv,
 			csr6 |= DMA_CONTROL_TTC_256;
 	}
 
-	writel(csr6, ioaddr + DMA_CONTROL);
+	writel(csr6, ioaddr + DMA_CHAN_CONTROL(channel));
 }
 
 static void dwmac1000_dump_dma_regs(struct stmmac_priv *priv,
@@ -271,12 +273,12 @@ static int dwmac1000_get_hw_feature(void __iomem *ioaddr,
 static void dwmac1000_rx_watchdog(struct stmmac_priv *priv,
 				  void __iomem *ioaddr, u32 riwt, u32 queue)
 {
-	writel(riwt, ioaddr + DMA_RX_WATCHDOG);
+	writel(riwt, ioaddr + DMA_CHAN_RX_WATCHDOG(queue));
 }
 
 const struct stmmac_dma_ops dwmac1000_dma_ops = {
 	.reset = dwmac_dma_reset,
-	.init = dwmac1000_dma_init,
+	.init_chan = dwmac1000_dma_init_channel,
 	.init_rx_chan = dwmac1000_dma_init_rx,
 	.init_tx_chan = dwmac1000_dma_init_tx,
 	.axi = dwmac1000_dma_axi,
drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c +1 -1
index dea270f60cc3..f861babc06f9 100644
@@ -19,7 +19,7 @@
 #include "dwmac_dma.h"
 
 static void dwmac100_dma_init(void __iomem *ioaddr,
-			      struct stmmac_dma_cfg *dma_cfg, int atds)
+			      struct stmmac_dma_cfg *dma_cfg)
 {
 	/* Enable Application Access by writing to DMA CSR0 */
 	writel(DMA_BUS_MODE_DEFAULT | (dma_cfg->pbl << DMA_BUS_MODE_PBL_SHIFT),
drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +1 -1
index 84d3a8551b03..e0165358c4ac 100644
@@ -153,7 +153,7 @@ static void dwmac410_dma_init_channel(struct stmmac_priv *priv,
 }
 
 static void dwmac4_dma_init(void __iomem *ioaddr,
-			    struct stmmac_dma_cfg *dma_cfg, int atds)
+			    struct stmmac_dma_cfg *dma_cfg)
 {
 	u32 value = readl(ioaddr + DMA_SYS_BUS_MODE);
 
drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h +18 -2
index 72672391675f..7c8b3ad739f7 100644
@@ -22,6 +22,23 @@
 #define DMA_INTR_ENA		0x0000101c	/* Interrupt Enable */
 #define DMA_MISSED_FRAME_CTR	0x00001020	/* Missed Frame Counter */
 
+/* Following DMA defines are channels oriented */
+#define DMA_CHAN_BASE_OFFSET			0x100
+
+static inline u32 dma_chan_base_addr(u32 base, u32 chan)
+{
+	return base + chan * DMA_CHAN_BASE_OFFSET;
+}
+
+#define DMA_CHAN_XMT_POLL_DEMAND(chan)	dma_chan_base_addr(DMA_XMT_POLL_DEMAND, chan)
+#define DMA_CHAN_INTR_ENA(chan)		dma_chan_base_addr(DMA_INTR_ENA, chan)
+#define DMA_CHAN_CONTROL(chan)		dma_chan_base_addr(DMA_CONTROL, chan)
+#define DMA_CHAN_STATUS(chan)		dma_chan_base_addr(DMA_STATUS, chan)
+#define DMA_CHAN_BUS_MODE(chan)		dma_chan_base_addr(DMA_BUS_MODE, chan)
+#define DMA_CHAN_RCV_BASE_ADDR(chan)	dma_chan_base_addr(DMA_RCV_BASE_ADDR, chan)
+#define DMA_CHAN_TX_BASE_ADDR(chan)	dma_chan_base_addr(DMA_TX_BASE_ADDR, chan)
+#define DMA_CHAN_RX_WATCHDOG(chan)	dma_chan_base_addr(DMA_RX_WATCHDOG, chan)
+
 /* SW Reset */
 #define DMA_BUS_MODE_SFT_RESET	0x00000001	/* Software Reset */
 
@@ -152,7 +169,7 @@
 #define NUM_DWMAC1000_DMA_REGS	23
 #define NUM_DWMAC4_DMA_REGS	27
 
-void dwmac_enable_dma_transmission(void __iomem *ioaddr);
+void dwmac_enable_dma_transmission(void __iomem *ioaddr, u32 chan);
 void dwmac_enable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
 			  u32 chan, bool rx, bool tx);
 void dwmac_disable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
@@ -168,5 +185,4 @@ void dwmac_dma_stop_rx(struct stmmac_priv *priv, void __iomem *ioaddr,
 int dwmac_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr,
 			struct stmmac_extra_stats *x, u32 chan, u32 dir);
 int dwmac_dma_reset(void __iomem *ioaddr);
-
 #endif /* __DWMAC_DMA_H__ */
drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c +16 -16
index 85e18f9a22f9..7570f01838a8 100644
@@ -28,65 +28,65 @@ int dwmac_dma_reset(void __iomem *ioaddr)
 }
 
 /* CSR1 enables the transmit DMA to check for new descriptor */
-void dwmac_enable_dma_transmission(void __iomem *ioaddr)
+void dwmac_enable_dma_transmission(void __iomem *ioaddr, u32 chan)
 {
-	writel(1, ioaddr + DMA_XMT_POLL_DEMAND);
+	writel(1, ioaddr + DMA_CHAN_XMT_POLL_DEMAND(chan));
 }
 
 void dwmac_enable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
 			  u32 chan, bool rx, bool tx)
 {
-	u32 value = readl(ioaddr + DMA_INTR_ENA);
+	u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
 
 	if (rx)
 		value |= DMA_INTR_DEFAULT_RX;
 	if (tx)
 		value |= DMA_INTR_DEFAULT_TX;
 
-	writel(value, ioaddr + DMA_INTR_ENA);
+	writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan));
 }
 
 void dwmac_disable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr,
 			   u32 chan, bool rx, bool tx)
 {
-	u32 value = readl(ioaddr + DMA_INTR_ENA);
+	u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
 
 	if (rx)
 		value &= ~DMA_INTR_DEFAULT_RX;
 	if (tx)
 		value &= ~DMA_INTR_DEFAULT_TX;
 
-	writel(value, ioaddr + DMA_INTR_ENA);
+	writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan));
 }
 
 void dwmac_dma_start_tx(struct stmmac_priv *priv, void __iomem *ioaddr,
 			u32 chan)
 {
-	u32 value = readl(ioaddr + DMA_CONTROL);
+	u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
 	value |= DMA_CONTROL_ST;
-	writel(value, ioaddr + DMA_CONTROL);
+	writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
 }
 
 void dwmac_dma_stop_tx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan)
 {
-	u32 value = readl(ioaddr + DMA_CONTROL);
+	u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
 	value &= ~DMA_CONTROL_ST;
-	writel(value, ioaddr + DMA_CONTROL);
+	writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
 }
 
 void dwmac_dma_start_rx(struct stmmac_priv *priv, void __iomem *ioaddr,
 			u32 chan)
 {
-	u32 value = readl(ioaddr + DMA_CONTROL);
+	u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
 	value |= DMA_CONTROL_SR;
-	writel(value, ioaddr + DMA_CONTROL);
+	writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
 }
 
 void dwmac_dma_stop_rx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan)
 {
-	u32 value = readl(ioaddr + DMA_CONTROL);
+	u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan));
 	value &= ~DMA_CONTROL_SR;
-	writel(value, ioaddr + DMA_CONTROL);
+	writel(value, ioaddr + DMA_CHAN_CONTROL(chan));
 }
 
 #ifdef DWMAC_DMA_DEBUG
@@ -165,7 +165,7 @@ int dwmac_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr,
 	struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats);
 	int ret = 0;
 	/* read the status register (CSR5) */
-	u32 intr_status = readl(ioaddr + DMA_STATUS);
+	u32 intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan));
 
 #ifdef DWMAC_DMA_DEBUG
 	/* Enable it to monitor DMA rx/tx status in case of critical problems */
@@ -235,7 +235,7 @@ int dwmac_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr,
 		pr_warn("%s: unexpected status %08x\n", __func__, intr_status);
 
 	/* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
-	writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS);
+	writel((intr_status & 0x7ffff), ioaddr + DMA_CHAN_STATUS(chan));
 
 	return ret;
 }
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c +1 -1
index dd2ab6185c40..7840bc403788 100644
@@ -20,7 +20,7 @@ static int dwxgmac2_dma_reset(void __iomem *ioaddr)
 }
 
 static void dwxgmac2_dma_init(void __iomem *ioaddr,
-			      struct stmmac_dma_cfg *dma_cfg, int atds)
+			      struct stmmac_dma_cfg *dma_cfg)
 {
 	u32 value = readl(ioaddr + XGMAC_DMA_SYSBUS_MODE);
 
drivers/net/ethernet/stmicro/stmmac/hwif.h +2 -3
index 7be04b54738b..3b20fb7f3a61 100644
@@ -175,8 +175,7 @@ struct dma_features;
 struct stmmac_dma_ops {
 	/* DMA core initialization */
 	int (*reset)(void __iomem *ioaddr);
-	void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg,
-		     int atds);
+	void (*init)(void __iomem *ioaddr, struct stmmac_dma_cfg *dma_cfg);
 	void (*init_chan)(struct stmmac_priv *priv, void __iomem *ioaddr,
 			  struct stmmac_dma_cfg *dma_cfg, u32 chan);
 	void (*init_rx_chan)(struct stmmac_priv *priv, void __iomem *ioaddr,
@@ -198,7 +197,7 @@ struct stmmac_dma_ops {
 	/* To track extra statistic (if supported) */
 	void (*dma_diagnostic_fr)(struct stmmac_extra_stats *x,
 				  void __iomem *ioaddr);
-	void (*enable_dma_transmission) (void __iomem *ioaddr);
+	void (*enable_dma_transmission)(void __iomem *ioaddr, u32 chan);
 	void (*enable_dma_irq)(struct stmmac_priv *priv, void __iomem *ioaddr,
 			       u32 chan, bool rx, bool tx);
 	void (*disable_dma_irq)(struct stmmac_priv *priv, void __iomem *ioaddr,
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +6 -0
index e1537a57815f..e94faa72f30e 100644
@@ -420,6 +420,12 @@ stmmac_ethtool_set_link_ksettings(struct net_device *dev,
 		return 0;
 	}
 
+	if (priv->plat->flags & STMMAC_FLAG_DISABLE_FORCE_1000) {
+		if (cmd->base.speed == SPEED_1000 &&
+		    cmd->base.autoneg != AUTONEG_ENABLE)
+			return -EOPNOTSUPP;
+	}
+
 	return phylink_ethtool_ksettings_set(priv->phylink, cmd);
 }
 
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +5 -6
index af16efeedf4a..45e28f9211df 100644
@@ -2556,7 +2556,7 @@ static bool stmmac_xdp_xmit_zc(struct stmmac_priv *priv, u32 queue, u32 budget)
 				       true, priv->mode, true, true,
 				       xdp_desc.len);
 
-		stmmac_enable_dma_transmission(priv, priv->ioaddr);
+		stmmac_enable_dma_transmission(priv, priv->ioaddr, queue);
 
 		xsk_tx_metadata_to_compl(meta,
 					 &tx_q->tx_skbuff_dma[entry].xsk_meta);
@@ -3006,7 +3006,6 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 	struct stmmac_rx_queue *rx_q;
 	struct stmmac_tx_queue *tx_q;
 	u32 chan = 0;
-	int atds = 0;
 	int ret = 0;
 
 	if (!priv->plat->dma_cfg || !priv->plat->dma_cfg->pbl) {
@@ -3015,7 +3014,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 	}
 
 	if (priv->extend_desc && (priv->mode == STMMAC_RING_MODE))
-		atds = 1;
+		priv->plat->dma_cfg->atds = 1;
 
 	ret = stmmac_reset(priv, priv->ioaddr);
 	if (ret) {
@@ -3024,7 +3023,7 @@ static int stmmac_init_dma_engine(struct stmmac_priv *priv)
 	}
 
 	/* DMA Configuration */
-	stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg, atds);
+	stmmac_dma_init(priv, priv->ioaddr, priv->plat->dma_cfg);
 
 	if (priv->plat->axi)
 		stmmac_axi(priv, priv->ioaddr, priv->plat->axi);
@@ -4753,7 +4752,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	netdev_tx_sent_queue(netdev_get_tx_queue(dev, queue), skb->len);
 
-	stmmac_enable_dma_transmission(priv, priv->ioaddr);
+	stmmac_enable_dma_transmission(priv, priv->ioaddr, queue);
 
 	stmmac_flush_tx_descriptors(priv, queue);
 	stmmac_tx_timer_arm(priv, queue);
@@ -4980,7 +4979,7 @@ static int stmmac_xdp_xmit_xdpf(struct stmmac_priv *priv, int queue,
 		u64_stats_update_end(&txq_stats->q_syncp);
 	}
 
-	stmmac_enable_dma_transmission(priv, priv->ioaddr);
+	stmmac_enable_dma_transmission(priv, priv->ioaddr, queue);
 
 	entry = STMMAC_GET_ENTRY(entry, priv->dma_conf.dma_tx_size);
 	tx_q->cur_tx = entry;
include/linux/stmmac.h +1 -0
index dfa1828cd756..1b54b84a6785 100644
@@ -100,6 +100,7 @@ struct stmmac_dma_cfg {
 	bool eame;
 	bool multi_msi_en;
 	bool dche;
+	bool atds;
 };
 
 #define AXI_BLEN	7
Signature · 1 line
2.31.4
reviewer
#3 lore raw

Re: [PATCH net-next v10 2/6] net: stmmac: Add multi-channel support

Quoted 8 lines · Yanteng Si

DW GMAC v3.x multi-channels feature is implemented as multiple sets of the same CSRs. Here is only preliminary support, it will be useful for the driver further evolution and for the users having multi-channel DWGMAC v3.x devices.

...

drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c stmmac_ethtool_set_link_ksettings(struct net_device *dev, · line 423

Quoted 9 lines
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +1 -0
index e1537a57815f..e94faa72f30e 100644
@@ -420,6 +420,12 @@ stmmac_ethtool_set_link_ksettings(struct net_device *dev,
 		return 0;
 	}
 
+	if (priv->plat->flags & STMMAC_FLAG_DISABLE_FORCE_1000) {

Hi Yanteng Si, Yanteng Si, all,

STMMAC_FLAG_DISABLE_FORCE_1000 is used here but it is not defined until PATCH 6/6. This breaks bisection.

I expect this can be resolved by defining STMMAC_FLAG_DISABLE_FORCE_1000 as part of this patch.

Quoted 8 lines
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +5 -0
+		if (cmd->base.speed == SPEED_1000 &&
+		    cmd->base.autoneg != AUTONEG_ENABLE)
+			return -EOPNOTSUPP;
+	}
+
 	return phylink_ethtool_ksettings_set(priv->phylink, cmd);
 }
 
Signature · 1 line
pw-bot: changes-requested
author
#4 lore raw

Re: [PATCH net-next v10 2/6] net: stmmac: Add multi-channel support

Quoted 19 lines · Simon Horman
Quoted 8 lines · Yanteng Si

DW GMAC v3.x multi-channels feature is implemented as multiple sets of the same CSRs. Here is only preliminary support, it will be useful for the driver further evolution and for the users having multi-channel DWGMAC v3.x devices.

...

Quoted 8 lines
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +0 -0
index e1537a57815f..e94faa72f30e 100644
@@ -420,6 +420,12 @@ stmmac_ethtool_set_link_ksettings(struct net_device *dev,
  		return 0;
  	}
 
Quoted 8 lines

drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c stmmac_ethtool_set_link_ksettings(struct net_device *dev, · line 423

Quoted 1 line
drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +1 -0
+	if (priv->plat->flags & STMMAC_FLAG_DISABLE_FORCE_1000) {

Hi Yanteng Si, Yanteng Si, all,

STMMAC_FLAG_DISABLE_FORCE_1000 is used here but it is not defined until PATCH 6/6. This breaks bisection.

I expect this can be resolved by defining STMMAC_FLAG_DISABLE_FORCE_1000 as part of this patch.

Sorry, this is to fix some LS2K2000 and some LS7A2000 bugs, in v11 I will split

them to 6/6.

Thank you for your review.

Thanks,

Yanteng

Quoted 2 lines
author
#5 lore raw

PATCH v10 3/6 net: stmmac: dwmac-loongson: Use PCI_DEVICE_DATA() macro for device identification

In reply to Yanteng Si

Just use PCI_DEVICE_DATA() macro for device identification, No changes to function functionality.

---
 drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +1 -1
index 9e40c28d453a..995c9bd144e0 100644
@@ -213,7 +213,7 @@ static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
 			 loongson_dwmac_resume);
 
 static const struct pci_device_id loongson_dwmac_id_table[] = {
-	{ PCI_VDEVICE(LOONGSON, 0x7a03) },
+	{ PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
Signature · 1 line
2.31.4
author
#6 lore raw

PATCH v10 4/6 net: stmmac: dwmac-loongson: Introduce GMAC setup

In reply to Yanteng Si

Based on IP core classification, loongson has two types of network
devices: GMAC and GNET. GMAC's ip_core id is 0x35/0x37, while GNET's ip_core id is 0x37/0x10.

Device tables:

device    type    pci_id    ip_core
ls2k1000  gmac    7a03      0x35/0x37
ls7a1000  gmac    7a03      0x35/0x37
ls2k2000  gnet    7a13      0x10
ls7a2000  gnet    7a13      0x37

The ref/ptp clock of gmac is 125000000. gmac device only has a MAC chip inside and needs an external PHY chip;

---
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 21 +++++++++++++------
 1 file changed, 15 insertions(+), 6 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +15 -6
index 995c9bd144e0..ad19b4087974 100644
@@ -9,7 +9,8 @@
 #include <linux/of_irq.h>
 #include "stmmac.h"
 
-static int loongson_default_data(struct plat_stmmacenet_data *plat)
+static void loongson_default_data(struct pci_dev *pdev,
+				  struct plat_stmmacenet_data *plat)
 {
 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
 	plat->has_gmac = 1;
@@ -24,16 +25,18 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
 	/* Set the maxmtu to a default of JUMBO_LEN */
 	plat->maxmtu = JUMBO_LEN;
 
-	/* Set default number of RX and TX queues to use */
-	plat->tx_queues_to_use = 1;
-	plat->rx_queues_to_use = 1;
-
 	/* Disable Priority config by default */
 	plat->tx_queues_cfg[0].use_prio = false;
 	plat->rx_queues_cfg[0].use_prio = false;
 
 	/* Disable RX queues routing by default */
 	plat->rx_queues_cfg[0].pkt_route = 0x0;
+}
+
+static int loongson_gmac_data(struct pci_dev *pdev,
+			      struct plat_stmmacenet_data *plat)
+{
+	loongson_default_data(pdev, plat);
 
 	/* Default to phy auto-detection */
 	plat->phy_addr = -1;
@@ -42,6 +45,12 @@ static int loongson_default_data(struct plat_stmmacenet_data *plat)
 	plat->dma_cfg->pblx8 = true;
 
 	plat->multicast_filter_bins = 256;
+	plat->clk_ref_rate = 125000000;
+	plat->clk_ptp_rate = 125000000;
+
+	plat->tx_queues_to_use = 1;
+	plat->rx_queues_to_use = 1;
+
 	return 0;
 }
 
@@ -114,7 +123,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 
 	pci_set_master(pdev);
 
-	loongson_default_data(plat);
+	loongson_gmac_data(pdev, plat);
 	pci_enable_msi(pdev);
 	memset(&res, 0, sizeof(res));
 	res.addr = pcim_iomap_table(pdev)[0];
Signature · 1 line
2.31.4
author
#7 lore raw

PATCH v10 5/6 net: stmmac: dwmac-loongson: Add full PCI support

In reply to Yanteng Si

Current dwmac-loongson only support LS2K in the "probed with PCI and configured with DT" manner. Add LS7A support on which the devices are fully PCI (non-DT).

Others:
LS2K is a SoC and LS7A is a bridge chip. In the current driving state, they are both gmac and phy_interface is RGMII.

---
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 103 +++++++++++-------
 1 file changed, 64 insertions(+), 39 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +64 -39
index ad19b4087974..69078eb1f923 100644
@@ -9,9 +9,19 @@
 #include <linux/of_irq.h>
 #include "stmmac.h"
 
+#define PCI_DEVICE_ID_LOONGSON_GMAC	0x7a03
+
+struct stmmac_pci_info {
+	int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
+};
+
 static void loongson_default_data(struct pci_dev *pdev,
 				  struct plat_stmmacenet_data *plat)
 {
+	/* Get bus_id, this can be overloaded later */
+	plat->bus_id = (pci_domain_nr(pdev->bus) << 16) |
+		       PCI_DEVID(pdev->bus->number, pdev->devfn);
+
 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
 	plat->has_gmac = 1;
 	plat->force_sf_dma_mode = 1;
@@ -40,6 +50,7 @@ static int loongson_gmac_data(struct pci_dev *pdev,
 
 	/* Default to phy auto-detection */
 	plat->phy_addr = -1;
+	plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
 
 	plat->dma_cfg->pbl = 32;
 	plat->dma_cfg->pblx8 = true;
@@ -54,19 +65,17 @@ static int loongson_gmac_data(struct pci_dev *pdev,
 	return 0;
 }
 
+static struct stmmac_pci_info loongson_gmac_pci_info = {
+	.setup = loongson_gmac_data,
+};
+
 static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct plat_stmmacenet_data *plat;
+	int ret, i, bus_id, phy_mode;
+	struct stmmac_pci_info *info;
 	struct stmmac_resources res;
 	struct device_node *np;
-	int ret, i, phy_mode;
-
-	np = dev_of_node(&pdev->dev);
-
-	if (!np) {
-		pr_info("dwmac_loongson_pci: No OF node\n");
-		return -ENODEV;
-	}
 
 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
 	if (!plat)
@@ -78,12 +87,6 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 	if (!plat->mdio_bus_data)
 		return -ENOMEM;
 
-	plat->mdio_node = of_get_child_by_name(np, "mdio");
-	if (plat->mdio_node) {
-		dev_info(&pdev->dev, "Found MDIO subnode\n");
-		plat->mdio_bus_data->needs_reset = true;
-	}
-
 	plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
 	if (!plat->dma_cfg) {
 		ret = -ENOMEM;
@@ -107,10 +110,6 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 		break;
 	}
 
-	plat->bus_id = of_alias_get_id(np, "ethernet");
-	if (plat->bus_id < 0)
-		plat->bus_id = pci_dev_id(pdev);
-
 	phy_mode = device_get_phy_mode(&pdev->dev);
 	if (phy_mode < 0) {
 		dev_err(&pdev->dev, "phy_mode not found\n");
@@ -123,30 +122,56 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 
 	pci_set_master(pdev);
 
-	loongson_gmac_data(pdev, plat);
-	pci_enable_msi(pdev);
-	memset(&res, 0, sizeof(res));
-	res.addr = pcim_iomap_table(pdev)[0];
-
-	res.irq = of_irq_get_byname(np, "macirq");
-	if (res.irq < 0) {
-		dev_err(&pdev->dev, "IRQ macirq not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
-	}
+	info = (struct stmmac_pci_info *)id->driver_data;
+	ret = info->setup(pdev, plat);
+	if (ret)
+		goto err_disable_device;
 
-	res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
-	if (res.wol_irq < 0) {
-		dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
-		res.wol_irq = res.irq;
+	if (np) {
+		plat->mdio_node = of_get_child_by_name(np, "mdio");
+		if (plat->mdio_node) {
+			dev_info(&pdev->dev, "Found MDIO subnode\n");
+			plat->mdio_bus_data->needs_reset = true;
+		}
+
+		bus_id = of_alias_get_id(np, "ethernet");
+		if (bus_id >= 0)
+			plat->bus_id = bus_id;
+
+		phy_mode = device_get_phy_mode(&pdev->dev);
+		if (phy_mode < 0) {
+			dev_err(&pdev->dev, "phy_mode not found\n");
+			ret = phy_mode;
+			goto err_disable_device;
+		}
+		plat->phy_interface = phy_mode;
+
+		res.irq = of_irq_get_byname(np, "macirq");
+		if (res.irq < 0) {
+			dev_err(&pdev->dev, "IRQ macirq not found\n");
+			ret = -ENODEV;
+			goto err_disable_msi;
+		}
+
+		res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
+		if (res.wol_irq < 0) {
+			dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
+			res.wol_irq = res.irq;
+		}
+
+		res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
+		if (res.lpi_irq < 0) {
+			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
+			ret = -ENODEV;
+			goto err_disable_msi;
+		}
+	} else {
+		res.irq = pdev->irq;
 	}
 
-	res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
-	if (res.lpi_irq < 0) {
-		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
-	}
+	pci_enable_msi(pdev);
+	memset(&res, 0, sizeof(res));
+	res.addr = pcim_iomap_table(pdev)[0];
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
 	if (ret)
Signature · 1 line
2.31.4
author
#8 lore raw

PATCH v10 6/6 net: stmmac: dwmac-loongson: Add Loongson GNET support

In reply to Yanteng Si

There are two types of Loongson DWGMAC. The first type shares the same register definitions and has similar logic as dwmac1000. The second type uses several different register definitions, we think it is necessary to distinguish rx and tx, so we split these bits into two.

Simply put, we split some single bit fields into double bits fileds:

Name Tx Rx

DMA_INTR_ENA_NIE = 0x00040000 | 0x00020000;
DMA_INTR_ENA_AIE = 0x00010000 | 0x00008000;
DMA_STATUS_NIS   = 0x00040000 | 0x00020000;
DMA_STATUS_AIS   = 0x00010000 | 0x00008000;
DMA_STATUS_FBI   = 0x00002000 | 0x00001000;

Therefore, when using, TX and RX must be set at the same time.

How to use them:
1. Create the Loongson GNET-specific stmmac_dma_ops.dma_interrupt() stmmac_dma_ops.init_chan()
methods in the dwmac-loongson.c driver. Adding all the Loongson-specific macros

2. Create a Loongson GNET-specific platform setup method with the next semantics:
+ allocate stmmac_dma_ops instance and initialize it with dwmac1000_dma_ops.
+ override the stmmac_dma_ops.{dma_interrupt, init_chan} with the pointers to the methods defined in 2.
+ allocate mac_device_info instance and initialize the mac_device_info.dma field with a pointer to the new stmmac_dma_ops instance.
+ initialize mac_device_info in a way it's done in dwmac1000_setup().

3. Initialize plat_stmmacenet_data.setup() with the pointer to the method created in 2.

GNET features:

Speeds: 10/100/1000Mbps
DMA-descriptors type: normal and enhanced
L3/L4 filters availability: support
VLAN hash table filter: support
PHY-interface: GMII
Remote Wake-up support: support
Mac Management Counters (MMC): support
DMA chennel number: 0x10 device is 8 and 0x37 device is 1

Others:
GNET integrates both MAC and PHY chips inside.
GNET device: LS2K2000, LS7A2000, the chip connection between the mac and
phy of these devices is not normal and requires two rounds of negotiation; LS7A2000 does not support half-duplex and multi-channel;

To enable multi-channel on LS2K2000, you need to turn off hardware checksum.

**Note**: Currently, onnly the LS2K2000's IP core is 0x10, while the IP cores of other devices are 0x37.

---
 drivers/net/ethernet/stmicro/stmmac/common.h  |   2 +
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 502 ++++++++++++++++--
 .../ethernet/stmicro/stmmac/dwmac1000_dma.c   |   1 +
 include/linux/stmmac.h                        |   1 +
 4 files changed, 465 insertions(+), 41 deletions(-)
drivers/net/ethernet/stmicro/stmmac/common.h +2 -0
index 9cd62b2110a1..6777dc997e9f 100644
@@ -29,6 +29,7 @@
 /* Synopsys Core versions */
 #define	DWMAC_CORE_3_40		0x34
 #define	DWMAC_CORE_3_50		0x35
+#define	DWMAC_CORE_3_70		0x37
 #define	DWMAC_CORE_4_00		0x40
 #define DWMAC_CORE_4_10		0x41
 #define DWMAC_CORE_5_00		0x50
@@ -258,6 +259,7 @@ struct stmmac_safety_stats {
 #define CSR_F_300M	300000000
 
 #define	MAC_CSR_H_FRQ_MASK	0x20
+#define	MAC_CTRL_PORT_SELECT_10_100	BIT(15)
 
 #define HASH_TABLE_SIZE 64
 #define PAUSE_TIME 0xffff
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +461 -41

566 lines not on this page · raw message

drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +1 -0
index f161ec9ac490..66c0c22908b1 100644
@@ -296,3 +296,4 @@ const struct stmmac_dma_ops dwmac1000_dma_ops = {
 	.get_hw_feature = dwmac1000_get_hw_feature,
 	.rx_watchdog = dwmac1000_rx_watchdog,
 };
+EXPORT_SYMBOL_GPL(dwmac1000_dma_ops);
include/linux/stmmac.h +1 -0
index 1b54b84a6785..c5d3d0ddb6f8 100644
@@ -223,6 +223,7 @@ struct dwmac4_addrs {
 #define STMMAC_FLAG_RX_CLK_RUNS_IN_LPI		BIT(10)
 #define STMMAC_FLAG_EN_TX_LPI_CLOCKGATING	BIT(11)
 #define STMMAC_FLAG_HWTSTAMP_CORRECT_LATENCY	BIT(12)
+#define STMMAC_FLAG_DISABLE_FORCE_1000		BIT(13)
 
 struct plat_stmmacenet_data {
 	int bus_id;
Signature · 1 line
2.31.4
reviewer
#9 lore raw

Re: [PATCH net-next v10 6/6] net: stmmac: dwmac-loongson: Add Loongson GNET support

On Tue, Apr 09, 2024 at 10:04:34PM +0800, Yanteng Si wrote:

...

Quoted 1 line
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +0 -0

...

Quoted 35 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +3 -23
@@ -145,42 +568,37 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 			goto err_disable_device;
 		}
 		plat->phy_interface = phy_mode;
-
-		res.irq = of_irq_get_byname(np, "macirq");
-		if (res.irq < 0) {
-			dev_err(&pdev->dev, "IRQ macirq not found\n");
-			ret = -ENODEV;
-			goto err_disable_msi;
-		}
-
-		res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
-		if (res.wol_irq < 0) {
-			dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
-			res.wol_irq = res.irq;
-		}
-
-		res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
-		if (res.lpi_irq < 0) {
-			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
-			ret = -ENODEV;
-			goto err_disable_msi;
-		}
-	} else {
-		res.irq = pdev->irq;
 	}
 
-	pci_enable_msi(pdev);
 	memset(&res, 0, sizeof(res));
 	res.addr = pcim_iomap_table(pdev)[0];
 
+	ld->dev = &pdev->dev;
+	plat->bsp_priv = ld;
+	loongson_gmac = readl(res.addr + GMAC_VERSION) & 0xff;

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id · line 588

Quoted 10 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +10 -0
+
+	switch (loongson_gmac) {
+	case LOONGSON_DWMAC_CORE_1_00:
+		plat->setup = loongson_gnet_setup;
+		/* Only channel 0 of the 0x10 device supports checksum,
+		 * so turn off checksum to enable multiple channels.
+		 */
+		for (i = 1; i < CHANNEL_NUM; i++) {
+			plat->tx_queues_cfg[i].coe_unsupported = 1;
+		};

nit: '}' rather than '};'

Quoted 19 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +8 -3
+		ret = loongson_dwmac_config_msi(pdev, plat, &res, np);
+		break;
+	default:	/* 0x35 device and 0x37 device. */
+		ret = loongson_dwmac_config_legacy(pdev, plat, &res, np);
+		break;
+	}
+
 	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
 	if (ret)
-		goto err_disable_msi;
+		goto err_disable_device;
 
 	return ret;
 
-err_disable_msi:
-	pci_disable_msi(pdev);
 err_disable_device:
 	pci_disable_device(pdev);
 err_put_node:

...

author
#10 lore raw

Re: [PATCH net-next v10 6/6] net: stmmac: dwmac-loongson: Add Loongson GNET support

Quoted 39 lines · Simon Horman

On Tue, Apr 09, 2024 at 10:04:34PM +0800, Yanteng Si wrote:

...

Quoted 1 line
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +0 -0

...

Quoted 32 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +0 -23
@@ -145,42 +568,37 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
  			goto err_disable_device;
  		}
  		plat->phy_interface = phy_mode;
-
-		res.irq = of_irq_get_byname(np, "macirq");
-		if (res.irq < 0) {
-			dev_err(&pdev->dev, "IRQ macirq not found\n");
-			ret = -ENODEV;
-			goto err_disable_msi;
-		}
-
-		res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
-		if (res.wol_irq < 0) {
-			dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
-			res.wol_irq = res.irq;
-		}
-
-		res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
-		if (res.lpi_irq < 0) {
-			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
-			ret = -ENODEV;
-			goto err_disable_msi;
-		}
-	} else {
-		res.irq = pdev->irq;
  	}
 
-	pci_enable_msi(pdev);
  	memset(&res, 0, sizeof(res));
  	res.addr = pcim_iomap_table(pdev)[0];
 
Quoted 14 lines

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id · line 588

Quoted 13 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +13 -0
+	ld->dev = &pdev->dev;
+	plat->bsp_priv = ld;
+	loongson_gmac = readl(res.addr + GMAC_VERSION) & 0xff;
+
+	switch (loongson_gmac) {
+	case LOONGSON_DWMAC_CORE_1_00:
+		plat->setup = loongson_gnet_setup;
+		/* Only channel 0 of the 0x10 device supports checksum,
+		 * so turn off checksum to enable multiple channels.
+		 */
+		for (i = 1; i < CHANNEL_NUM; i++) {
+			plat->tx_queues_cfg[i].coe_unsupported = 1;
+		};

nit: '}' rather than '};'

OK.

Thanks,

Yanteng

Quoted 21 lines
Quoted 20 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +8 -3
+		ret = loongson_dwmac_config_msi(pdev, plat, &res, np);
+		break;
+	default:	/* 0x35 device and 0x37 device. */
+		ret = loongson_dwmac_config_legacy(pdev, plat, &res, np);
+		break;
+	}
+
  	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
  	if (ret)
-		goto err_disable_msi;
+		goto err_disable_device;
 
  	return ret;
 
-err_disable_msi:
-	pci_disable_msi(pdev);
  err_disable_device:
  	pci_disable_device(pdev);
  err_put_node:

...

#11 lore raw

Re: [PATCH net-next v10 6/6] net: stmmac: dwmac-loongson: Add Loongson GNET support

In reply to Yanteng Si

Hi, Yanteng,

Quoted 182 lines · Yanteng Si

There are two types of Loongson DWGMAC. The first type shares the same register definitions and has similar logic as dwmac1000. The second type uses several different register definitions, we think it is necessary to distinguish rx and tx, so we split these bits into two.

Simply put, we split some single bit fields into double bits fileds:

Name Tx Rx

DMA_INTR_ENA_NIE = 0x00040000 | 0x00020000;
DMA_INTR_ENA_AIE = 0x00010000 | 0x00008000;
DMA_STATUS_NIS   = 0x00040000 | 0x00020000;
DMA_STATUS_AIS   = 0x00010000 | 0x00008000;
DMA_STATUS_FBI   = 0x00002000 | 0x00001000;

Therefore, when using, TX and RX must be set at the same time.

How to use them:
1. Create the Loongson GNET-specific stmmac_dma_ops.dma_interrupt() stmmac_dma_ops.init_chan()
methods in the dwmac-loongson.c driver. Adding all the Loongson-specific macros

2. Create a Loongson GNET-specific platform setup method with the next semantics:
+ allocate stmmac_dma_ops instance and initialize it with dwmac1000_dma_ops.
+ override the stmmac_dma_ops.{dma_interrupt, init_chan} with the pointers to the methods defined in 2.
+ allocate mac_device_info instance and initialize the mac_device_info.dma field with a pointer to the new stmmac_dma_ops instance.
+ initialize mac_device_info in a way it's done in dwmac1000_setup().

3. Initialize plat_stmmacenet_data.setup() with the pointer to the method created in 2.

GNET features:

Speeds: 10/100/1000Mbps
DMA-descriptors type: normal and enhanced
L3/L4 filters availability: support
VLAN hash table filter: support
PHY-interface: GMII
Remote Wake-up support: support
Mac Management Counters (MMC): support
DMA chennel number: 0x10 device is 8 and 0x37 device is 1

Others:
GNET integrates both MAC and PHY chips inside.
GNET device: LS2K2000, LS7A2000, the chip connection between the mac and
phy of these devices is not normal and requires two rounds of negotiation; LS7A2000 does not support half-duplex and multi-channel;

To enable multi-channel on LS2K2000, you need to turn off hardware checksum.

**Note**: Currently, onnly the LS2K2000's IP core is 0x10, while the IP cores of other devices are 0x37.

---
 drivers/net/ethernet/stmicro/stmmac/common.h  |   2 +
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 502 ++++++++++++++++--
 .../ethernet/stmicro/stmmac/dwmac1000_dma.c   |   1 +
 include/linux/stmmac.h                        |   1 +
 4 files changed, 465 insertions(+), 41 deletions(-)
drivers/net/ethernet/stmicro/stmmac/common.h +2 -0
index 9cd62b2110a1..6777dc997e9f 100644
@@ -29,6 +29,7 @@
 /* Synopsys Core versions */
 #define        DWMAC_CORE_3_40         0x34
 #define        DWMAC_CORE_3_50         0x35
+#define        DWMAC_CORE_3_70         0x37
 #define        DWMAC_CORE_4_00         0x40
 #define DWMAC_CORE_4_10                0x41
 #define DWMAC_CORE_5_00                0x50
@@ -258,6 +259,7 @@ struct stmmac_safety_stats {
 #define CSR_F_300M     300000000
 
 #define        MAC_CSR_H_FRQ_MASK      0x20
+#define        MAC_CTRL_PORT_SELECT_10_100     BIT(15)
 
 #define HASH_TABLE_SIZE 64
 #define PAUSE_TIME 0xffff
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +70 -1
index 69078eb1f923..e05d7ca6cfe4 100644
@@ -8,8 +8,69 @@
 #include <linux/device.h>
 #include <linux/of_irq.h>
 #include "stmmac.h"
+#include "dwmac_dma.h"
+#include "dwmac1000.h"
+
+/* Normal Loongson Tx Summary */
+#define DMA_INTR_ENA_NIE_TX_LOONGSON   0x00040000
+/* Normal Loongson Rx Summary */
+#define DMA_INTR_ENA_NIE_RX_LOONGSON   0x00020000
+#define DMA_INTR_NORMAL_LOONGSON       (DMA_INTR_ENA_NIE_TX_LOONGSON | \
+                                        DMA_INTR_ENA_NIE_RX_LOONGSON | \
+                                        DMA_INTR_ENA_RIE | DMA_INTR_ENA_TIE)
+
+/* Abnormal Loongson Tx Summary */
+#define DMA_INTR_ENA_AIE_TX_LOONGSON   0x00010000
+/* Abnormal Loongson Rx Summary */
+#define DMA_INTR_ENA_AIE_RX_LOONGSON   0x00008000
+
+#define DMA_INTR_ABNORMAL_LOONGSON     (DMA_INTR_ENA_AIE_TX_LOONGSON | \
+                                        DMA_INTR_ENA_AIE_RX_LOONGSON | \
+                                        DMA_INTR_ENA_FBE | DMA_INTR_ENA_UNE)
+
+#define DMA_INTR_DEFAULT_MASK_LOONGSON (DMA_INTR_NORMAL_LOONGSON | \
+                                        DMA_INTR_ABNORMAL_LOONGSON)
+
+/* Normal Loongson Tx Interrupt Summary */
+#define DMA_STATUS_NIS_TX_LOONGSON     0x00040000
+/* Normal Loongson Rx Interrupt Summary */
+#define DMA_STATUS_NIS_RX_LOONGSON     0x00020000
+
+/* Abnormal Loongson Tx Interrupt Summary */
+#define DMA_STATUS_AIS_TX_LOONGSON     0x00010000
+/* Abnormal Loongson Rx Interrupt Summary */
+#define DMA_STATUS_AIS_RX_LOONGSON     0x00008000
+
+/* Fatal Loongson Tx Bus Error Interrupt */
+#define DMA_STATUS_FBI_TX_LOONGSON     0x00002000
+/* Fatal Loongson Rx Bus Error Interrupt */
+#define DMA_STATUS_FBI_RX_LOONGSON     0x00001000
+
+#define DMA_STATUS_MSK_COMMON_LOONGSON (DMA_STATUS_NIS_TX_LOONGSON | \
+                                        DMA_STATUS_NIS_RX_LOONGSON | \
+                                        DMA_STATUS_AIS_TX_LOONGSON | \
+                                        DMA_STATUS_AIS_RX_LOONGSON | \
+                                        DMA_STATUS_FBI_TX_LOONGSON | \
+                                        DMA_STATUS_FBI_RX_LOONGSON)
+
+#define DMA_STATUS_MSK_RX_LOONGSON     (DMA_STATUS_ERI | DMA_STATUS_RWT | \
+                                        DMA_STATUS_RPS | DMA_STATUS_RU  | \
+                                        DMA_STATUS_RI  | DMA_STATUS_OVF | \
+                                        DMA_STATUS_MSK_COMMON_LOONGSON)
+
+#define DMA_STATUS_MSK_TX_LOONGSON     (DMA_STATUS_ETI | DMA_STATUS_UNF | \
+                                        DMA_STATUS_TJT | DMA_STATUS_TU  | \
+                                        DMA_STATUS_TPS | DMA_STATUS_TI  | \
+                                        DMA_STATUS_MSK_COMMON_LOONGSON)
 
 #define PCI_DEVICE_ID_LOONGSON_GMAC    0x7a03
+#define PCI_DEVICE_ID_LOONGSON_GNET    0x7a13
+#define LOONGSON_DWMAC_CORE_1_00       0x10    /* Loongson custom IP */
+#define CHANNEL_NUM                    8
+
+struct loongson_data {
+       struct device *dev;
+};
 
 struct stmmac_pci_info {
        int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
@@ -69,13 +130,379 @@ static struct stmmac_pci_info loongson_gmac_pci_info = {
        .setup = loongson_gmac_data,
 };
 
-static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static void loongson_gnet_dma_init_channel(struct stmmac_priv *priv,
+                                          void __iomem *ioaddr,
+                                          struct stmmac_dma_cfg *dma_cfg,
+                                          u32 chan)
+{
+       int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
+       int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
+       u32 value;
+

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static struct stmmac_pci_info loongson_gmac_pci_info = { · line 151

Quoted 10 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +10 -0
+       /* common channel control register config */
+       value = readl(ioaddr + DMA_CHAN_BUS_MODE(chan));
+
+       /* Set the DMA PBL (Programmable Burst Length) mode.
+        *
+        * Note: before stmmac core 3.50 this mode bit was 4xPBL, and
+        * post 3.5 mode bit acts as 8*PBL.
+        */
+       if (dma_cfg->pblx8)
+               value |= DMA_BUS_MODE_MAXPBL;

Adding a new blank line is better here.

Quoted 123 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +123 -0
+       value |= DMA_BUS_MODE_USP;
+       value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
+       value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+       value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
+
+       /* Set the Fixed burst mode */
+       if (dma_cfg->fixed_burst)
+               value |= DMA_BUS_MODE_FB;
+
+       /* Mixed Burst has no effect when fb is set */
+       if (dma_cfg->mixed_burst)
+               value |= DMA_BUS_MODE_MB;
+
+       if (dma_cfg->atds)
+               value |= DMA_BUS_MODE_ATDS;
+
+       if (dma_cfg->aal)
+               value |= DMA_BUS_MODE_AAL;
+
+       writel(value, ioaddr + DMA_CHAN_BUS_MODE(chan));
+
+       /* Mask interrupts by writing to CSR7 */
+       writel(DMA_INTR_DEFAULT_MASK_LOONGSON, ioaddr +
+              DMA_CHAN_INTR_ENA(chan));
+}
+
+static int loongson_gnet_dma_interrupt(struct stmmac_priv *priv,
+                                      void __iomem *ioaddr,
+                                      struct stmmac_extra_stats *x,
+                                      u32 chan, u32 dir)
+{
+       struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats);
+       u32 abnor_intr_status;
+       u32 nor_intr_status;
+       u32 fb_intr_status;
+       u32 intr_status;
+       int ret = 0;
+
+       /* read the status register (CSR5) */
+       intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan));
+
+       if (dir == DMA_DIR_RX)
+               intr_status &= DMA_STATUS_MSK_RX_LOONGSON;
+       else if (dir == DMA_DIR_TX)
+               intr_status &= DMA_STATUS_MSK_TX_LOONGSON;
+
+       nor_intr_status = intr_status & (DMA_STATUS_NIS_TX_LOONGSON |
+               DMA_STATUS_NIS_RX_LOONGSON);
+       abnor_intr_status = intr_status & (DMA_STATUS_AIS_TX_LOONGSON |
+               DMA_STATUS_AIS_RX_LOONGSON);
+       fb_intr_status = intr_status & (DMA_STATUS_FBI_TX_LOONGSON |
+               DMA_STATUS_FBI_RX_LOONGSON);
+
+       /* ABNORMAL interrupts */
+       if (unlikely(abnor_intr_status)) {
+               if (unlikely(intr_status & DMA_STATUS_UNF)) {
+                       ret = tx_hard_error_bump_tc;
+                       x->tx_undeflow_irq++;
+               }
+               if (unlikely(intr_status & DMA_STATUS_TJT))
+                       x->tx_jabber_irq++;
+
+               if (unlikely(intr_status & DMA_STATUS_OVF))
+                       x->rx_overflow_irq++;
+
+               if (unlikely(intr_status & DMA_STATUS_RU))
+                       x->rx_buf_unav_irq++;
+               if (unlikely(intr_status & DMA_STATUS_RPS))
+                       x->rx_process_stopped_irq++;
+               if (unlikely(intr_status & DMA_STATUS_RWT))
+                       x->rx_watchdog_irq++;
+               if (unlikely(intr_status & DMA_STATUS_ETI))
+                       x->tx_early_irq++;
+               if (unlikely(intr_status & DMA_STATUS_TPS)) {
+                       x->tx_process_stopped_irq++;
+                       ret = tx_hard_error;
+               }
+               if (unlikely(intr_status & fb_intr_status)) {
+                       x->fatal_bus_error_irq++;
+                       ret = tx_hard_error;
+               }
+       }
+       /* TX/RX NORMAL interrupts */
+       if (likely(nor_intr_status)) {
+               if (likely(intr_status & DMA_STATUS_RI)) {
+                       u32 value = readl(ioaddr + DMA_INTR_ENA);
+                       /* to schedule NAPI on real RIE event. */
+                       if (likely(value & DMA_INTR_ENA_RIE)) {
+                               u64_stats_update_begin(&stats->syncp);
+                               u64_stats_inc(&stats->rx_normal_irq_n[chan]);
+                               u64_stats_update_end(&stats->syncp);
+                               ret |= handle_rx;
+                       }
+               }
+               if (likely(intr_status & DMA_STATUS_TI)) {
+                       u64_stats_update_begin(&stats->syncp);
+                       u64_stats_inc(&stats->tx_normal_irq_n[chan]);
+                       u64_stats_update_end(&stats->syncp);
+                       ret |= handle_tx;
+               }
+               if (unlikely(intr_status & DMA_STATUS_ERI))
+                       x->rx_early_irq++;
+       }
+       /* Optional hardware blocks, interrupts should be disabled */
+       if (unlikely(intr_status &
+                    (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
+               pr_warn("%s: unexpected status %08x\n", __func__, intr_status);
+
+       /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */
+       writel((intr_status & 0x7ffff), ioaddr + DMA_CHAN_STATUS(chan));
+
+       return ret;
+}
+
+static void loongson_phylink_get_caps(struct stmmac_priv *priv)
+{
+       struct pci_dev *pdev = to_pci_dev(priv->device);
+       struct stmmac_resources res;
+       u32 loongson_gmac;
+
+       memset(&res, 0, sizeof(res));
+       res.addr = pcim_iomap_table(pdev)[0];
+       loongson_gmac = readl(res.addr + GMAC_VERSION) & 0xff;

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static struct stmmac_pci_info loongson_gmac_pci_info = { · line 284

Quoted 10 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +10 -0
+
+       /* The GMAC device with PCI ID 7a03 does not support any pause mode.
+        * The GNET device (only LS7A2000) does not support half-duplex.
+        */
+       if (pdev->device == PCI_DEVICE_ID_LOONGSON_GMAC) {
+               priv->hw->link.caps = MAC_10FD | MAC_100FD |
+                       MAC_1000FD;
+       } else {
+               priv->hw->link.caps = (MAC_ASYM_PAUSE |
+                       MAC_SYM_PAUSE | MAC_10FD | MAC_100FD | MAC_1000FD);

I think some GNET support HD while others don't, so we should enable HD here, and clear HD only for the later 0x37 case. Otherwise you disable HD for all devices indeed.

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static struct stmmac_pci_info loongson_gmac_pci_info = { · line 288

Quoted 4 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +4 -0
+
+               if (loongson_gmac == DWMAC_CORE_3_70) {
+                       priv->hw->link.caps &= ~(MAC_10HD |
+                               MAC_100HD | MAC_1000HD);

I remember that kernel code allows a line exceeding 80 columns now, and keeping in one line looks better at least in this case. Moreover, we don't need { and } here.

Quoted 221 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +211 -0
+               }
+       }
+}
+
+static void loongson_gnet_fix_speed(void *priv, unsigned int speed,
+                                   unsigned int mode)
+{
+       struct loongson_data *ld = (struct loongson_data *)priv;
+       struct net_device *ndev = dev_get_drvdata(ld->dev);
+       struct stmmac_priv *ptr = netdev_priv(ndev);
+
+       /* The controller and PHY don't work well together.
+        * We need to use the PS bit to check if the controller's status
+        * is correct and reset PHY if necessary.
+        * MAC_CTRL_REG.15 is defined by the GMAC_CONTROL_PS macro.
+        */
+       if (speed == SPEED_1000) {
+               if (readl(ptr->ioaddr + MAC_CTRL_REG) &
+                   MAC_CTRL_PORT_SELECT_10_100)
+                       /* Word around hardware bug, restart autoneg */
+                       phy_restart_aneg(ndev->phydev);
+       }
+}
+
+static struct mac_device_info *loongson_gnet_setup(void *apriv)
+{
+       struct stmmac_ops *loongson_dwmac_ops;
+       struct stmmac_priv *priv = apriv;
+       struct mac_device_info *mac;
+       struct stmmac_dma_ops *dma;
+
+       mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL);
+       if (!mac)
+               return NULL;
+
+       dma = devm_kzalloc(priv->device, sizeof(*dma), GFP_KERNEL);
+       if (!dma)
+               return NULL;
+
+       loongson_dwmac_ops = devm_kzalloc(priv->device,
+                                         sizeof(*loongson_dwmac_ops),
+                                         GFP_KERNEL);
+       if (!loongson_dwmac_ops)
+               return NULL;
+
+       /* The original IP-core version is 0x37 in all Loongson GNET
+        * (ls2k2000 and ls7a2000), but the GNET HW designers have changed the
+        * GMAC_VERSION.SNPSVER field to the custom 0x10 value on the Loongson
+        * ls2k2000 MAC to emphasize the differences: multiple DMA-channels,
+        * AV feature and GMAC_INT_STATUS CSR flags layout. Get back the
+        * original value so the correct HW-interface would be selected.
+        */
+       priv->synopsys_id = DWMAC_CORE_3_70;
+       priv->dev->priv_flags |= IFF_UNICAST_FLT;
+
+       *dma = dwmac1000_dma_ops;
+       dma->init_chan = loongson_gnet_dma_init_channel;
+       dma->dma_interrupt = loongson_gnet_dma_interrupt;
+       mac->dma = dma;
+
+       *loongson_dwmac_ops = dwmac1000_ops;
+       loongson_dwmac_ops->phylink_get_caps = loongson_phylink_get_caps;
+       mac->mac = loongson_dwmac_ops;
+
+       /* Pre-initialize the respective "mac" fields as it's done in
+        * dwmac1000_setup()
+        */
+       mac->pcsr = priv->ioaddr;
+       mac->multicast_filter_bins = priv->plat->multicast_filter_bins;
+       mac->unicast_filter_entries = priv->plat->unicast_filter_entries;
+       mac->mcast_bits_log2 = 0;
+
+       if (mac->multicast_filter_bins)
+               mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+
+       mac->link.duplex = GMAC_CONTROL_DM;
+       mac->link.speed10 = GMAC_CONTROL_PS;
+       mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
+       mac->link.speed1000 = 0;
+       mac->link.speed_mask = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
+       mac->mii.addr = GMAC_MII_ADDR;
+       mac->mii.data = GMAC_MII_DATA;
+       mac->mii.addr_shift = 11;
+       mac->mii.addr_mask = 0x0000F800;
+       mac->mii.reg_shift = 6;
+       mac->mii.reg_mask = 0x000007C0;
+       mac->mii.clk_csr_shift = 2;
+       mac->mii.clk_csr_mask = GENMASK(5, 2);
+
+       return mac;
+}
+
+static int loongson_gnet_data(struct pci_dev *pdev,
+                             struct plat_stmmacenet_data *plat)
+{
+       struct stmmac_resources res;
+       u32 loongson_gmac;
+
+       loongson_default_data(pdev, plat);
+
+       plat->multicast_filter_bins = 256;
+
+       plat->mdio_bus_data->phy_mask =  ~(u32)BIT(2);
+
+       plat->phy_addr = -1;
+       plat->phy_interface = PHY_INTERFACE_MODE_GMII;
+
+       plat->fix_mac_speed = loongson_gnet_fix_speed;
+
+       plat->dma_cfg->pbl = 32;
+       plat->dma_cfg->pblx8 = true;
+
+       plat->clk_ref_rate = 125000000;
+       plat->clk_ptp_rate = 125000000;
+
+       memset(&res, 0, sizeof(res));
+       res.addr = pcim_iomap_table(pdev)[0];
+
+       loongson_gmac = readl(res.addr + GMAC_VERSION) & 0xff;
+
+       if (loongson_gmac == LOONGSON_DWMAC_CORE_1_00) {
+               plat->rx_queues_to_use = CHANNEL_NUM;
+               plat->tx_queues_to_use = CHANNEL_NUM;
+       } else {
+               plat->tx_queues_to_use = 1;
+               plat->rx_queues_to_use = 1;
+       }
+
+       /* GNET devices with dev revision 0x00 do not support manually
+        * setting the speed to 1000.
+        */
+       if (pdev->revision == 0x00)
+               plat->flags |= STMMAC_FLAG_DISABLE_FORCE_1000;
+
+       return 0;
+}
+
+static struct stmmac_pci_info loongson_gnet_pci_info = {
+       .setup = loongson_gnet_data,
+};
+
+static int loongson_dwmac_config_legacy(struct pci_dev *pdev,
+                                       struct plat_stmmacenet_data *plat,
+                                       struct stmmac_resources *res,
+                                       struct device_node *np)
+{
+       if (np) {
+               res->irq = of_irq_get_byname(np, "macirq");
+               if (res->irq < 0) {
+                       dev_err(&pdev->dev, "IRQ macirq not found\n");
+                       return -ENODEV;
+               }
+
+               res->wol_irq = of_irq_get_byname(np, "eth_wake_irq");
+               if (res->wol_irq < 0) {
+                       dev_info(&pdev->dev,
+                                "IRQ eth_wake_irq not found, using macirq\n");
+                       res->wol_irq = res->irq;
+               }
+
+               res->lpi_irq = of_irq_get_byname(np, "eth_lpi");
+               if (res->lpi_irq < 0) {
+                       dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
+                       return -ENODEV;
+               }
+       } else {
+               res->irq = pdev->irq;
+               res->wol_irq = res->irq;
+       }
+
+       return 0;
+}
+
+static int loongson_dwmac_config_msi(struct pci_dev *pdev,
+                                    struct plat_stmmacenet_data *plat,
+                                    struct stmmac_resources *res,
+                                    struct device_node *np)
+{
+       int i, ret, vecs;
+
+       vecs = roundup_pow_of_two(CHANNEL_NUM * 2 + 1);
+       ret = pci_alloc_irq_vectors(pdev, vecs, vecs, PCI_IRQ_MSI);
+       if (ret < 0) {
+               dev_info(&pdev->dev,
+                        "MSI enable failed, Fallback to legacy interrupt\n");
+               return loongson_dwmac_config_legacy(pdev, plat, res, np);
+       }
+
+       res->irq = pci_irq_vector(pdev, 0);
+       res->wol_irq = 0;
+
+       /* INT NAME | MAC | CH7 rx | CH7 tx | ... | CH0 rx | CH0 tx |
+        * --------- ----- -------- --------  ...  -------- --------
+        * IRQ NUM  |  0  |   1    |   2    | ... |   15   |   16   |
+        */
+       for (i = 0; i < CHANNEL_NUM; i++) {
+               res->rx_irq[CHANNEL_NUM - 1 - i] =
+                       pci_irq_vector(pdev, 1 + i * 2);
+               res->tx_irq[CHANNEL_NUM - 1 - i] =
+                       pci_irq_vector(pdev, 2 + i * 2);
+       }
+
+       plat->flags |= STMMAC_FLAG_MULTI_MSI_EN;
+
+       return 0;
+}
+
+static int loongson_dwmac_probe(struct pci_dev *pdev,
+                               const struct pci_device_id *id)
 {
        struct plat_stmmacenet_data *plat;
        int ret, i, bus_id, phy_mode;
        struct stmmac_pci_info *info;
        struct stmmac_resources res;
+       struct loongson_data *ld;
        struct device_node *np;
+       u32 loongson_gmac;
 
        plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
        if (!plat)

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id · line 518

Quoted 10 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +2 -5
@@ -87,11 +514,16 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
        if (!plat->mdio_bus_data)
                return -ENOMEM;
 
-       plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
-       if (!plat->dma_cfg) {
-               ret = -ENOMEM;
-               goto err_put_node;
-       }
+       plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
+                                    GFP_KERNEL);

This is an irrelevant modification, don't do that in this patch.

Others look good to me.

Huacai

Quoted 136 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +31 -35
+       if (!plat->dma_cfg)
+               return -ENOMEM;
+
+       ld = devm_kzalloc(&pdev->dev, sizeof(*ld), GFP_KERNEL);
+       if (!ld)
+               return -ENOMEM;
+
+       np = dev_of_node(&pdev->dev);
 
        /* Enable pci device */
        ret = pci_enable_device(pdev);
@@ -110,14 +542,6 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
                break;
        }
 
-       phy_mode = device_get_phy_mode(&pdev->dev);
-       if (phy_mode < 0) {
-               dev_err(&pdev->dev, "phy_mode not found\n");
-               ret = phy_mode;
-               goto err_disable_device;
-       }
-
-       plat->phy_interface = phy_mode;
        plat->mac_interface = PHY_INTERFACE_MODE_GMII;
 
        pci_set_master(pdev);
@@ -133,7 +557,6 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
                        dev_info(&pdev->dev, "Found MDIO subnode\n");
                        plat->mdio_bus_data->needs_reset = true;
                }
-
                bus_id = of_alias_get_id(np, "ethernet");
                if (bus_id >= 0)
                        plat->bus_id = bus_id;
@@ -145,42 +568,37 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
                        goto err_disable_device;
                }
                plat->phy_interface = phy_mode;
-
-               res.irq = of_irq_get_byname(np, "macirq");
-               if (res.irq < 0) {
-                       dev_err(&pdev->dev, "IRQ macirq not found\n");
-                       ret = -ENODEV;
-                       goto err_disable_msi;
-               }
-
-               res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
-               if (res.wol_irq < 0) {
-                       dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
-                       res.wol_irq = res.irq;
-               }
-
-               res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
-               if (res.lpi_irq < 0) {
-                       dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
-                       ret = -ENODEV;
-                       goto err_disable_msi;
-               }
-       } else {
-               res.irq = pdev->irq;
        }
 
-       pci_enable_msi(pdev);
        memset(&res, 0, sizeof(res));
        res.addr = pcim_iomap_table(pdev)[0];
 
+       ld->dev = &pdev->dev;
+       plat->bsp_priv = ld;
+       loongson_gmac = readl(res.addr + GMAC_VERSION) & 0xff;
+
+       switch (loongson_gmac) {
+       case LOONGSON_DWMAC_CORE_1_00:
+               plat->setup = loongson_gnet_setup;
+               /* Only channel 0 of the 0x10 device supports checksum,
+                * so turn off checksum to enable multiple channels.
+                */
+               for (i = 1; i < CHANNEL_NUM; i++) {
+                       plat->tx_queues_cfg[i].coe_unsupported = 1;
+               };
+               ret = loongson_dwmac_config_msi(pdev, plat, &res, np);
+               break;
+       default:        /* 0x35 device and 0x37 device. */
+               ret = loongson_dwmac_config_legacy(pdev, plat, &res, np);
+               break;
+       }
+
        ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
        if (ret)
-               goto err_disable_msi;
+               goto err_disable_device;
 
        return ret;
 
-err_disable_msi:
-       pci_disable_msi(pdev);
 err_disable_device:
        pci_disable_device(pdev);
 err_put_node:
@@ -248,6 +666,7 @@ static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
 
 static const struct pci_device_id loongson_dwmac_id_table[] = {
        { PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) },
+       { PCI_DEVICE_DATA(LOONGSON, GNET, &loongson_gnet_pci_info) },
        {}
 };
 MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);
@@ -266,4 +685,5 @@ module_pci_driver(loongson_dwmac_driver);
 
 MODULE_DESCRIPTION("Loongson DWMAC PCI driver");
 MODULE_AUTHOR("Qing Zhang <[email protected]>");
+MODULE_AUTHOR("Yanteng Si <[email protected]>");
 MODULE_LICENSE("GPL v2");
drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c +1 -0
index f161ec9ac490..66c0c22908b1 100644
@@ -296,3 +296,4 @@ const struct stmmac_dma_ops dwmac1000_dma_ops = {
        .get_hw_feature = dwmac1000_get_hw_feature,
        .rx_watchdog = dwmac1000_rx_watchdog,
 };
+EXPORT_SYMBOL_GPL(dwmac1000_dma_ops);
include/linux/stmmac.h +1 -1
index 1b54b84a6785..c5d3d0ddb6f8 100644
@@ -223,6 +223,7 @@ struct dwmac4_addrs {
 #define STMMAC_FLAG_RX_CLK_RUNS_IN_LPI         BIT(10)
 #define STMMAC_FLAG_EN_TX_LPI_CLOCKGATING      BIT(11)
 #define STMMAC_FLAG_HWTSTAMP_CORRECT_LATENCY   BIT(12)
+#define STMMAC_FLAG_DISABLE_FORCE_1000         BIT(13)
 
 struct plat_stmmacenet_data {
        int bus_id;
--

2.31.4

author
#12 lore raw

Re: [PATCH net-next v10 6/6] net: stmmac: dwmac-loongson: Add Loongson GNET support

Quoted 23 lines · Huacai Chen

Hi, Yanteng,

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +4 -0
+        * post 3.5 mode bit acts as 8*PBL.
+        */
+       if (dma_cfg->pblx8)
+               value |= DMA_BUS_MODE_MAXPBL;

Adding a new blank line is better here.
OK.

Quoted 14 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +14 -0
+static void loongson_phylink_get_caps(struct stmmac_priv *priv)
+{
+       struct pci_dev *pdev = to_pci_dev(priv->device);
+       struct stmmac_resources res;
+       u32 loongson_gmac;
+
+       memset(&res, 0, sizeof(res));
+       res.addr = pcim_iomap_table(pdev)[0];
+       loongson_gmac = readl(res.addr + GMAC_VERSION) & 0xff;
+
+       /* The GMAC device with PCI ID 7a03 does not support any pause mode.
+        * The GNET device (only LS7A2000) does not support half-duplex.
+        */
+       if (pdev->device == PCI_DEVICE_ID_LOONGSON_GMAC) {
Quoted 8 lines

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static struct stmmac_pci_info loongson_gmac_pci_info = { · line 284

Quoted 5 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +5 -0
+               priv->hw->link.caps = MAC_10FD | MAC_100FD |
+                       MAC_1000FD;
+       } else {
+               priv->hw->link.caps = (MAC_ASYM_PAUSE |
+                       MAC_SYM_PAUSE | MAC_10FD | MAC_100FD | MAC_1000FD);

I think some GNET support HD while others don't, so we should enable HD here, and clear HD only for the later 0x37 case. Otherwise you disable HD for all devices indeed.

Yeah, you are right. I will fix it in v11.

Quoted 7 lines

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static struct stmmac_pci_info loongson_gmac_pci_info = { · line 288

Quoted 4 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +4 -0
+
+               if (loongson_gmac == DWMAC_CORE_3_70) {
+                       priv->hw->link.caps &= ~(MAC_10HD |
+                               MAC_100HD | MAC_1000HD);

I remember that kernel code allows a line exceeding 80 columns now, and keeping in one line looks better at least in this case. Moreover, we don't need { and } here.

Networking code (still) prefers code to be 80 columns wide or less.

see https://lore.kernel.org/netdev/[email protected]/

Quoted 17 lines
Quoted 17 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +4 -0
+static int loongson_dwmac_probe(struct pci_dev *pdev,
+                               const struct pci_device_id *id)
  {
         struct plat_stmmacenet_data *plat;
         int ret, i, bus_id, phy_mode;
         struct stmmac_pci_info *info;
         struct stmmac_resources res;
+       struct loongson_data *ld;
         struct device_node *np;
+       u32 loongson_gmac;
 
         plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
         if (!plat)
@@ -87,11 +514,16 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
         if (!plat->mdio_bus_data)
                 return -ENOMEM;
 
Quoted 8 lines

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id · line 518

Quoted 7 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +2 -5
-       plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
-       if (!plat->dma_cfg) {
-               ret = -ENOMEM;
-               goto err_put_node;
-       }
+       plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg),
+                                    GFP_KERNEL);

This is an irrelevant modification, don't do that in this patch.

OK.

Thanks,

Yanteng

#13 lore raw

Re: [PATCH net-next v10 6/6] net: stmmac: dwmac-loongson: Add Loongson GNET support

In reply to Yanteng Si

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static struct stmmac_pci_info loongson_gmac_pci_info = { · line 282

Quoted 7 lines · Yanteng Si
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +7 -0
+	/* The GMAC device with PCI ID 7a03 does not support any pause mode.
+	 * The GNET device (only LS7A2000) does not support half-duplex.
+	 */
+	if (pdev->device == PCI_DEVICE_ID_LOONGSON_GMAC) {
+		priv->hw->link.caps = MAC_10FD | MAC_100FD |
+			MAC_1000FD;
+	} else {

I'm sorry, but what follows looks totally broken to me.

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static struct stmmac_pci_info loongson_gmac_pci_info = { · line 284

Quoted 2 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +2 -0
+		priv->hw->link.caps = (MAC_ASYM_PAUSE |
+			MAC_SYM_PAUSE | MAC_10FD | MAC_100FD | MAC_1000FD);

Parens not required.

This sets 10Mbps full duplex, 100Mbps full duplex, 1000Mbps full duplex. It does *not* set 10Mbps half duplex, 100Mbps half duplex, nor 1000Mbps half duplex.

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static struct stmmac_pci_info loongson_gmac_pci_info = { · line 289

Quoted 5 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +5 -0
+
+		if (loongson_gmac == DWMAC_CORE_3_70) {
+			priv->hw->link.caps &= ~(MAC_10HD |
+				MAC_100HD | MAC_1000HD);
+		}

Braces not required.

This clears 10Mbps half duplex, 100Mbps half duplex, 1000Mbps half duplex, all of which were _NOT_ set. Therefore this code as written can be entirely deleted.

Alternatively, this code is completely untested and is functionally incorrect.

Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
author
#14 lore raw

Re: [PATCH net-next v10 6/6] net: stmmac: dwmac-loongson: Add Loongson GNET support

Quoted 9 lines · Russell King (Oracle)

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static struct stmmac_pci_info loongson_gmac_pci_info = { · line 282

Quoted 7 lines · Yanteng Si
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +7 -0
+	/* The GMAC device with PCI ID 7a03 does not support any pause mode.
+	 * The GNET device (only LS7A2000) does not support half-duplex.
+	 */
+	if (pdev->device == PCI_DEVICE_ID_LOONGSON_GMAC) {
+		priv->hw->link.caps = MAC_10FD | MAC_100FD |
+			MAC_1000FD;
+	} else {

I'm sorry, but what follows looks totally broken to me.

Sorry. Let's make it better together.

Quoted 8 lines

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static struct stmmac_pci_info loongson_gmac_pci_info = { · line 284

Quoted 3 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +2 -0
+		priv->hw->link.caps = (MAC_ASYM_PAUSE |
+			MAC_SYM_PAUSE | MAC_10FD | MAC_100FD | MAC_1000FD);

Parens not required.

This sets 10Mbps full duplex, 100Mbps full duplex, 1000Mbps full duplex. It does *not* set 10Mbps half duplex, 100Mbps half duplex, nor 1000Mbps half duplex.

OK, I will set them by MAC10 | MAC100 | MAC1000.

Quoted 8 lines

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c static struct stmmac_pci_info loongson_gmac_pci_info = { · line 289

Quoted 6 lines
drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +5 -0
+
+		if (loongson_gmac == DWMAC_CORE_3_70) {
+			priv->hw->link.caps &= ~(MAC_10HD |
+				MAC_100HD | MAC_1000HD);
+		}

Braces not required.

Quoted 6 lines

This clears 10Mbps half duplex, 100Mbps half duplex, 1000Mbps half duplex, all of which were _NOT_ set. Therefore this code as written can be entirely deleted.

Alternatively, this code is completely untested and is functionally incorrect.

Sorry.

In fact, this was the version before picking up Serge's patch(1/6), which was tested

at the time. Just picked up, between the haste did not test enough. But in v11,

I've dropped this function and fixed it in setup().

Thanks,

Yanteng

Quoted 1 line