configs/imxrt1050-evk: New defconfig
PATCH v6 1/1 configs/imxrt1050-evk: New defconfig
Add defconfig for imxrt1050-evk is a development board from NXP.
Giulio and I worked on Linux and U-boot for this board. And now I'm adding support for the new board in Buildroot.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have buildroot ported to them it seems reasonable to add support for them.
--- DEVELOPERS | 6 +++ board/freescale/imxrt1050evk/genimage.cfg | 40 ++++++++++++++++++ board/freescale/imxrt1050evk/readme.txt | 30 ++++++++++++++ board/freescale/imxrt1050evk/uboot.fragment | 2 + configs/imxrt1050-evk_defconfig | 45 +++++++++++++++++++++ 5 files changed, 123 insertions(+) create mode 100644 board/freescale/imxrt1050evk/genimage.cfg create mode 100644 board/freescale/imxrt1050evk/readme.txt create mode 100644 board/freescale/imxrt1050evk/uboot.fragment create mode 100644 configs/imxrt1050-evk_defconfig
DEVELOPERS +6 -0
@@ -1132,9 +1132,11 @@ F: package/webp/ F: package/xapian/ N: Giulio Benetti <[email protected]> +F: board/freescale/imxrt1050evk/* F: board/olimex/a* F: configs/amarula_vyasa_rk3288_defconfig F: configs/asus_tinker_rk3288_defconfig +F: configs/imxrt1050-evk_defconfig F: configs/olimex_a* F: package/at/ F: package/binutils/
@@ -1477,6 +1479,10 @@ F: package/wmctrl/ F: package/x11r7/xdriver_xf86-video-imx/ F: package/x11r7/xdriver_xf86-video-imx-viv/ +N: Jesse Taube <[email protected]> +F: board/freescale/imxrt1050evk/* +F: configs/imxrt1050-evk_defconfig + N: Jesse Van Gavere <[email protected]> F: package/qt6/qt6serialport/
board/freescale/imxrt1050evk/genimage.cfg new file +40 -0
@@ -0,0 +1,40 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "imxrt1050-evk.dtb", + } + } + + size = 8M +} + +image sdcard.img { + hdimage { + } + + partition SPL { + in-partition-table = "no" + image = "SPL" + offset = 1K + size = 127K + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.img" + offset = 128K + size = 512K + } + + partition boot { + partition-type = 0xc + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}
board/freescale/imxrt1050evk/readme.txt new file +30 -0
@@ -0,0 +1,30 @@ +NXP i.MXRT1050 EVK board +------------------------ + +i.MX RT1050 are NXP's crossover MCUs. They combine the high performance and high +level of integration of an applications processors with the ease-of-use and +real-time functionality of a microcontroller. The i.MX RT1050 MCU runs on the Arm +Cortex-M7 core at 600 MHz. +https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK + +To build a minimal support for this board: + +$ make imxrt1050-evk_defconfig +$ make + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be flashed into the SD card: + +$ dd if=output/images/sdcard.img of=/dev/sdX +Where 'sdX' is the device node of the uSD. + +Jumper settings: + + SW7: 1 0 1 0 + +Where 0 means bottom position and 1 means top position (from the +switch label numbers reference). + +Connect the USB cable between the EVK and the PC for the console. + +Insert the micro SD card in the board, power it up and U-Boot messages should come up.
board/freescale/imxrt1050evk/uboot.fragment new file +2 -0
@@ -0,0 +1,2 @@ +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs console=ttyLP0 root=/dev/mmcblk0p2 rw earlycon rootwait;load mmc 0:1 0x80800000 imxrt1050-evk.dtb;load mmc 0:1 0x80000000 uImage;bootm 0x80000000 - 0x80800000"
configs/imxrt1050-evk_defconfig new file +45 -0
45 lines not on this page · raw message
Signature · 6 lines
2.39.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Hi Jesse,
Quoted 190 lines · Jesse Taube
Add defconfig for imxrt1050-evk is a development board from NXP.
Giulio and I worked on Linux and U-boot for this board. And now I'm adding support for the new board in Buildroot.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have buildroot ported to them it seems reasonable to add support for them.
Signed-off-by Jesse Taube <[email protected]>Cc Giulio Benetti <[email protected]>Reviewed-by Giulio Benetti <[email protected]>Tested-by Giulio Benetti <[email protected]>--- DEVELOPERS | 6 +++ board/freescale/imxrt1050evk/genimage.cfg | 40 ++++++++++++++++++ board/freescale/imxrt1050evk/readme.txt | 30 ++++++++++++++ board/freescale/imxrt1050evk/uboot.fragment | 2 + configs/imxrt1050-evk_defconfig | 45 +++++++++++++++++++++ 5 files changed, 123 insertions(+)create mode 100644 board/freescale/imxrt1050evk/genimage.cfg create mode 100644
board/freescale/imxrt1050evk/readme.txtcreate mode 100644 board/freescale/imxrt1050evk/uboot.fragment create mode 100644 configs/imxrt1050-evk_defconfigDEVELOPERS +6
-0@@ -1132,9 +1132,11 @@ F: package/webp/ F: package/xapian/ N: Giulio Benetti <[email protected]> +F: board/freescale/imxrt1050evk/* F: board/olimex/a* F: configs/amarula_vyasa_rk3288_defconfig F: configs/asus_tinker_rk3288_defconfig +F: configs/imxrt1050-evk_defconfig F: configs/olimex_a* F: package/at/ F: package/binutils/@@ -1477,6 +1479,10 @@ F: package/wmctrl/ F: package/x11r7/xdriver_xf86-video-imx/ F: package/x11r7/xdriver_xf86-video-imx-viv/ +N: Jesse Taube <[email protected]> +F: board/freescale/imxrt1050evk/* +F: configs/imxrt1050-evk_defconfig + N: Jesse Van Gavere <[email protected]> F: package/qt6/qt6serialport/board/freescale/imxrt1050evk/genimage.cfg new file +40
-0@@ -0,0 +1,40 @@ +image boot.vfat { + vfat { + files = { + "uImage", + "imxrt1050-evk.dtb", + } + } + + size = 8M +} + +image sdcard.img { + hdimage { + } + + partition SPL { + in-partition-table = "no" + image = "SPL" + offset = 1K + size = 127K + } + + partition u-boot { + in-partition-table = "no" + image = "u-boot.img" + offset = 128K + size = 512K + } + + partition boot { + partition-type = 0xc + bootable = "true" + image = "boot.vfat" + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +}board/freescale/imxrt1050evk/readme.txt new file +30
-0@@ -0,0 +1,30 @@ +NXP i.MXRT1050 EVK board +------------------------ + +i.MX RT1050 are NXP's crossover MCUs. They combine the high performance and high +level of integration of an applications processors with the ease-of-use and +real-time functionality of a microcontroller. The i.MX RT1050 MCU runs on the Arm +Cortex-M7 core at 600 MHz. +https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/i-mx-rt1050-evaluation-kit:MIMXRT1050-EVK + +To build a minimal support for this board: + +$ make imxrt1050-evk_defconfig +$ make + +Buildroot prepares a bootable "sdcard.img" image in the output/images/ +directory, ready to be flashed into the SD card: + +$ dd if=output/images/sdcard.img of=/dev/sdX +Where 'sdX' is the device node of the uSD. + +Jumper settings: + + SW7: 1 0 1 0 + +Where 0 means bottom position and 1 means top position (from the +switch label numbers reference). + +Connect the USB cable between the EVK and the PC for the console. + +Insert the micro SD card in the board, power it up and U-Boot messages should come up.board/freescale/imxrt1050evk/uboot.fragment new file +2
-0@@ -0,0 +1,2 @@ +CONFIG_USE_BOOTCOMMAND=y +CONFIG_BOOTCOMMAND="setenv bootargs console=ttyLP0 root=/dev/mmcblk0p2 rw earlycon rootwait;load mmc 0:1 0x80800000 imxrt1050-evk.dtb;load mmc 0:1 0x80000000 uImage;bootm 0x80000000 - 0x80800000"configs/imxrt1050-evk_defconfig new file +35
-0@@ -0,0 +1,45 @@ +# Architecture +BR2_arm=y +BR2_cortex_m7=y + +# Image +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/freescale/imxrt1050evk/genimage.cfg" + +# Toolchain +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_VERSION=y +BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="6.1" +BR2_LINUX_KERNEL_DEFCONFIG="imxrt" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imxrt1050-evk" + +# Filesystem +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="16M" + +# NOMMU Busybox +BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-minimal.config" + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2022.10" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="imxrt1050-evk" +BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/freescale/imxrt1050evk/uboot.fragment"
configs/imxrt1050-evk_defconfig line 45
Quoted 10 lines
configs/imxrt1050-evk_defconfig new file +10
-0+BR2_TARGET_UBOOT_FORMAT_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="SPL" +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y + +# Required tools to create the SD card image +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MKPASSWD=y +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_MTOOLS=y
I've retested with this patch and everything works fine.
Best regards
Signature · 6 lines
Giulio Benetti CEO/CTO@Benetti Engineering sas _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Hello Jesse,
Quoted 14 lines · On Mon, 2 Jan 2023 13:16:03 -0500 Jesse Taube <[email protected]> wrote:
Add defconfig for imxrt1050-evk is a development board from NXP.
Giulio and I worked on Linux and U-boot for this board. And now I'm adding support for the new board in Buildroot.
The i.MXRTxxxx family spreads from i.MXRT1020 to i.MXRT1170 with the first one supporting 1 USB OTG & 100M ethernet with a cortex-M7@500Mhz up to the latter with i.MXRT1170 with cortex-M7@1Ghz and cortex-M4@400Mhz, 2MB of internal SRAM, 2D GPU, 2x 1Gb and 1x 100Mb ENET. The i.MXRT family is NXP's answer to STM32F7xx, as it uses only simple SDRAM, it gives the chance of a 4 or less layer PCBs. Seeing that these chips are comparable to the STM32F7xxs which have buildroot ported to them it seems reasonable to add support for them.
Quoted 6 lines
Signed-off-by Jesse Taube <[email protected]>Cc Giulio Benetti <[email protected]>Reviewed-by Giulio Benetti <[email protected]>Tested-by Giulio Benetti <[email protected]>
Sorry for the super super long delay, but I have now applied this patch to our next branch.
DEVELOPERS F: package/webp/ · line 1135
Quoted 9 lines
DEVELOPERS +1
-0@@ -1132,9 +1132,11 @@ F: package/webp/ F: package/xapian/ N: Giulio Benetti <[email protected]> +F: board/freescale/imxrt1050evk/*
The * here is not needed. A directory is properly interpreted.
DEVELOPERS F: package/wmctrl/ · line 1483
Quoted 2 lines
DEVELOPERS +2
-0+N: Jesse Taube <[email protected]> +F: board/freescale/imxrt1050evk/*
Same.
DEVELOPERS F: package/webp/ · line 1140
Quoted 3 lines
DEVELOPERS +3
-0+# Required tools to create the SD card image +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MKPASSWD=y
I don't think mkpasswd is needed in your configuration, so I dropped that.
Committed with those changes.
Possible improvements now:
- Update to newer kernel/U-Boot
- Use zImage instead of uImage for the kernel if possible
- Maybe use extlinux.conf in U-Boot if it's also possible
Nothing urgent, just suggestions.
Thanks for your contribution!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot