Skip to contentSkip to conversation

RISC-V: Start to remove xlen preprocess

PATCH In review Alistair Francis 5 participants 26 messages Dec 16, 2020 – Dec 17, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v4 cover RISC-V: Start to remove xlen preprocess

The RISC-V QEMU port currently has lot of preprocessor directives that check if we are targetting a 32-bit or 64-bit CPU. This means that the 64-bit RISC-V target can not run 32-bit CPUs. This is different to most other QEMU architectures and doesn't allow us to mix xlens (such as when running Hypervisors with different xlen guests).

This series is a step toward removing some of those to allow us to use 32-bit CPUs on 64-bit RISC-V targets.

v4:
- Add a commit that converts the machine 32-bit check to use the CPU
v3:
- Address Richard's comments
v2:
- Rebase on the latest RISC-V tree

Alistair Francis (16):
hw/riscv: Expand the is 32-bit check to support more CPUs target/riscv: Add a TYPE_RISCV_CPU_BASE CPU
riscv: spike: Remove target macro conditionals
riscv: virt: Remove target macro conditionals hw/riscv: boot: Remove compile time XLEN checks hw/riscv: virt: Remove compile time XLEN checks hw/riscv: spike: Remove compile time XLEN checks hw/riscv: sifive_u: Remove compile time XLEN checks target/riscv: fpu_helper: Match function defs in HELPER macros target/riscv: Add a riscv_cpu_is_32bit() helper function target/riscv: Specify the XLEN for CPUs target/riscv: cpu: Remove compile time XLEN checks target/riscv: cpu_helper: Remove compile time XLEN checks target/riscv: csr: Remove compile time XLEN checks target/riscv: cpu: Set XLEN independently from target hw/riscv: Use the CPU to determine if 32-bit

 include/hw/riscv/boot.h   |  14 +--
 include/hw/riscv/spike.h  |   6 --
 include/hw/riscv/virt.h   |   6 --
 target/riscv/cpu.h        |   8 ++
 target/riscv/cpu_bits.h   |   4 +-
 target/riscv/helper.h     |  24 ++----
 hw/riscv/boot.c           |  70 ++++++++-------
 hw/riscv/sifive_u.c       |  59 +++++++------
 hw/riscv/spike.c          |  52 +++++------
 hw/riscv/virt.c           |  39 +++++----
 target/riscv/cpu.c        |  84 ++++++++++++------
 target/riscv/cpu_helper.c |  12 +--
 target/riscv/csr.c        | 176 ++++++++++++++++++++------------------
 target/riscv/fpu_helper.c |   8 --
 14 files changed, 299 insertions(+), 263 deletions(-)
Signature · 1 line
2.29.2
#1 lore raw

PATCH v4 1/16 hw/riscv: Expand the is 32-bit check to support more CPUs

Currently the riscv_is_32_bit() function only supports the generic rv32 CPUs. Extend the function to support the SiFive and LowRISC CPUs as well.

---
 hw/riscv/boot.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
hw/riscv/boot.c +11 -1
index d62f3dc758..3c70ac75d7 100644
@@ -41,7 +41,17 @@
 
 bool riscv_is_32_bit(MachineState *machine)
 {
-    if (!strncmp(machine->cpu_type, "rv32", 4)) {
+    /*
+     * To determine if the CPU is 32-bit we need to check a few different CPUs.
+     *
+     * If the CPU starts with rv32
+     * If the CPU is a sifive 3 seriries CPU (E31, U34)
+     * If it's the Ibex CPU
+     */
+    if (!strncmp(machine->cpu_type, "rv32", 4) ||
+        (!strncmp(machine->cpu_type, "sifive", 6) &&
+            machine->cpu_type[8] == '3') ||
+        !strncmp(machine->cpu_type, "lowrisc-ibex", 12)) {
         return true;
     } else {
         return false;
Signature · 1 line
2.29.2
#2 lore raw

PATCH v4 2/16 target/riscv: Add a TYPE_RISCV_CPU_BASE CPU

In reply to Alistair Francis
---
 target/riscv/cpu.h | 6 ++++++
 1 file changed, 6 insertions(+)
target/riscv/cpu.h +6 -0
index c0a326c843..9c064f3094 100644
@@ -44,6 +44,12 @@
 #define TYPE_RISCV_CPU_SIFIVE_U34       RISCV_CPU_TYPE_NAME("sifive-u34")
 #define TYPE_RISCV_CPU_SIFIVE_U54       RISCV_CPU_TYPE_NAME("sifive-u54")
 
+#if defined(TARGET_RISCV32)
+# define TYPE_RISCV_CPU_BASE            TYPE_RISCV_CPU_BASE32
+#elif defined(TARGET_RISCV64)
+# define TYPE_RISCV_CPU_BASE            TYPE_RISCV_CPU_BASE64
+#endif
+
 #define RV32 ((target_ulong)1 << (TARGET_LONG_BITS - 2))
 #define RV64 ((target_ulong)2 << (TARGET_LONG_BITS - 2))
 
Signature · 1 line
2.29.2
#3 lore raw

PATCH v4 3/16 riscv: spike: Remove target macro conditionals

In reply to Alistair Francis
---
 include/hw/riscv/spike.h | 6 ------
 hw/riscv/spike.c         | 2 +-
 2 files changed, 1 insertion(+), 7 deletions(-)
include/hw/riscv/spike.h +0 -6
index cddeca2e77..cdd1a13011 100644
@@ -47,10 +47,4 @@ enum {
     SPIKE_DRAM
 };
 
-#if defined(TARGET_RISCV32)
-#define SPIKE_V1_10_0_CPU TYPE_RISCV_CPU_BASE32
-#elif defined(TARGET_RISCV64)
-#define SPIKE_V1_10_0_CPU TYPE_RISCV_CPU_BASE64
-#endif
-
 #endif
hw/riscv/spike.c +1 -1
index facac6e7d2..29f07f47b1 100644
@@ -317,7 +317,7 @@ static void spike_machine_class_init(ObjectClass *oc, void *data)
     mc->init = spike_board_init;
     mc->max_cpus = SPIKE_CPUS_MAX;
     mc->is_default = true;
-    mc->default_cpu_type = SPIKE_V1_10_0_CPU;
+    mc->default_cpu_type = TYPE_RISCV_CPU_BASE;
     mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids;
     mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props;
     mc->get_default_cpu_node_id = riscv_numa_get_default_cpu_node_id;
Signature · 1 line
2.29.2
#4 lore raw

PATCH v4 4/16 riscv: virt: Remove target macro conditionals

In reply to Alistair Francis
---
 include/hw/riscv/virt.h | 6 ------
 hw/riscv/virt.c         | 2 +-
 2 files changed, 1 insertion(+), 7 deletions(-)
include/hw/riscv/virt.h +0 -6
index b4ed9a32eb..84b7a3848f 100644
@@ -89,10 +89,4 @@ enum {
 #define FDT_INT_MAP_WIDTH     (FDT_PCI_ADDR_CELLS + FDT_PCI_INT_CELLS + 1 + \
                                FDT_PLIC_ADDR_CELLS + FDT_PLIC_INT_CELLS)
 
-#if defined(TARGET_RISCV32)
-#define VIRT_CPU TYPE_RISCV_CPU_BASE32
-#elif defined(TARGET_RISCV64)
-#define VIRT_CPU TYPE_RISCV_CPU_BASE64
-#endif
-
 #endif
hw/riscv/virt.c +1 -1
index 25cea7aa67..995e1c35f1 100644
@@ -706,7 +706,7 @@ static void virt_machine_class_init(ObjectClass *oc, void *data)
     mc->desc = "RISC-V VirtIO board";
     mc->init = virt_machine_init;
     mc->max_cpus = VIRT_CPUS_MAX;
-    mc->default_cpu_type = VIRT_CPU;
+    mc->default_cpu_type = TYPE_RISCV_CPU_BASE;
     mc->pci_allow_0_address = true;
     mc->possible_cpu_arch_ids = riscv_numa_possible_cpu_arch_ids;
     mc->cpu_index_to_instance_props = riscv_numa_cpu_index_to_props;
Signature · 1 line
2.29.2
#5 lore raw

PATCH v4 5/16 hw/riscv: boot: Remove compile time XLEN checks

In reply to Alistair Francis
---
 include/hw/riscv/boot.h |  8 +++---
 hw/riscv/boot.c         | 55 ++++++++++++++++++++++-------------------
 hw/riscv/sifive_u.c     |  2 +-
 hw/riscv/spike.c        |  3 ++-
 hw/riscv/virt.c         |  2 +-
 5 files changed, 39 insertions(+), 31 deletions(-)
include/hw/riscv/boot.h +5 -3
index 0b01988727..b6d37a91d6 100644
@@ -41,10 +41,12 @@ target_ulong riscv_load_kernel(const char *kernel_filename,
 hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size,
                          uint64_t kernel_entry, hwaddr *start);
 uint32_t riscv_load_fdt(hwaddr dram_start, uint64_t dram_size, void *fdt);
-void riscv_setup_rom_reset_vec(hwaddr saddr, hwaddr rom_base,
-                               hwaddr rom_size, uint64_t kernel_entry,
+void riscv_setup_rom_reset_vec(MachineState *machine, hwaddr saddr,
+                               hwaddr rom_base, hwaddr rom_size,
+                               uint64_t kernel_entry,
                                uint32_t fdt_load_addr, void *fdt);
-void riscv_rom_copy_firmware_info(hwaddr rom_base, hwaddr rom_size,
+void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
+                                  hwaddr rom_size,
                                   uint32_t reset_vec_size,
                                   uint64_t kernel_entry);
 
hw/riscv/boot.c +30 -25

99 lines not on this page · raw message

hw/riscv/sifive_u.c +1 -1
index 2f19a9cda2..d550befadb 100644
@@ -550,7 +550,7 @@ static void sifive_u_machine_init(MachineState *machine)
     rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
                           memmap[SIFIVE_U_DEV_MROM].base, &address_space_memory);
 
-    riscv_rom_copy_firmware_info(memmap[SIFIVE_U_DEV_MROM].base,
+    riscv_rom_copy_firmware_info(machine, memmap[SIFIVE_U_DEV_MROM].base,
                                  memmap[SIFIVE_U_DEV_MROM].size,
                                  sizeof(reset_vec), kernel_entry);
 }
hw/riscv/spike.c +2 -1
index 29f07f47b1..875f371f0f 100644
@@ -296,7 +296,8 @@ static void spike_board_init(MachineState *machine)
     fdt_load_addr = riscv_load_fdt(memmap[SPIKE_DRAM].base,
                                    machine->ram_size, s->fdt);
     /* load the reset vector */
-    riscv_setup_rom_reset_vec(memmap[SPIKE_DRAM].base, memmap[SPIKE_MROM].base,
+    riscv_setup_rom_reset_vec(machine, memmap[SPIKE_DRAM].base,
+                              memmap[SPIKE_MROM].base,
                               memmap[SPIKE_MROM].size, kernel_entry,
                               fdt_load_addr, s->fdt);
 
hw/riscv/virt.c +1 -1
index 995e1c35f1..f8c5509f13 100644
@@ -656,7 +656,7 @@ static void virt_machine_init(MachineState *machine)
     fdt_load_addr = riscv_load_fdt(memmap[VIRT_DRAM].base,
                                    machine->ram_size, s->fdt);
     /* load the reset vector */
-    riscv_setup_rom_reset_vec(start_addr, virt_memmap[VIRT_MROM].base,
+    riscv_setup_rom_reset_vec(machine, start_addr, virt_memmap[VIRT_MROM].base,
                               virt_memmap[VIRT_MROM].size, kernel_entry,
                               fdt_load_addr, s->fdt);
 
Signature · 1 line
2.29.2
#6 lore raw

PATCH v4 6/16 hw/riscv: virt: Remove compile time XLEN checks

In reply to Alistair Francis
---
 hw/riscv/virt.c | 32 +++++++++++++++++---------------
 1 file changed, 17 insertions(+), 15 deletions(-)
hw/riscv/virt.c +17 -15
index f8c5509f13..915e9ae216 100644
@@ -43,12 +43,6 @@
 #include "hw/pci/pci.h"
 #include "hw/pci-host/gpex.h"
 
-#if defined(TARGET_RISCV32)
-# define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.bin"
-#else
-# define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.bin"
-#endif
-
 static const struct MemmapEntry {
     hwaddr base;
     hwaddr size;
@@ -177,7 +171,7 @@ static void create_pcie_irq_map(void *fdt, char *nodename,
 }
 
 static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
-    uint64_t mem_size, const char *cmdline)
+                       uint64_t mem_size, const char *cmdline, bool is_32_bit)
 {
     void *fdt;
     int i, cpu, socket;
@@ -242,11 +236,11 @@ static void create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap,
             cpu_name = g_strdup_printf("/cpus/cpu@%d",
                 s->soc[socket].hartid_base + cpu);
             qemu_fdt_add_subnode(fdt, cpu_name);
-#if defined(TARGET_RISCV32)
-            qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv32");
-#else
-            qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv48");
-#endif
+            if (is_32_bit) {
+                qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv32");
+            } else {
+                qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv48");
+            }
             name = riscv_isa_string(&s->soc[socket].harts[cpu]);
             qemu_fdt_setprop_string(fdt, cpu_name, "riscv,isa", name);
             g_free(name);
@@ -608,7 +602,8 @@ static void virt_machine_init(MachineState *machine)
         main_mem);
 
     /* create device tree */
-    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
+    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
+               riscv_is_32_bit(machine));
 
     /* boot rom */
     memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom",
@@ -616,8 +611,15 @@ static void virt_machine_init(MachineState *machine)
     memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base,
                                 mask_rom);
 
-    firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME,
-                                                     start_addr, NULL);
+    if (riscv_is_32_bit(machine)) {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv32-generic-fw_dynamic.bin",
+                                    start_addr, NULL);
+    } else {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv64-generic-fw_dynamic.bin",
+                                    start_addr, NULL);
+    }
 
     if (machine->kernel_filename) {
         kernel_start_addr = riscv_calc_kernel_start_addr(machine,
Signature · 1 line
2.29.2
#7 lore raw

PATCH v4 7/16 hw/riscv: spike: Remove compile time XLEN checks

In reply to Alistair Francis
---
 hw/riscv/spike.c | 45 ++++++++++++++++++++++++---------------------
 1 file changed, 24 insertions(+), 21 deletions(-)
hw/riscv/spike.c +24 -21
index 875f371f0f..3e47e4579d 100644
@@ -43,17 +43,6 @@
 #include "sysemu/qtest.h"
 #include "sysemu/sysemu.h"
 
-/*
- * Not like other RISC-V machines that use plain binary bios images,
- * keeping ELF files here was intentional because BIN files don't work
- * for the Spike machine as HTIF emulation depends on ELF parsing.
- */
-#if defined(TARGET_RISCV32)
-# define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.elf"
-#else
-# define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.elf"
-#endif
-
 static const struct MemmapEntry {
     hwaddr base;
     hwaddr size;
@@ -64,7 +53,7 @@ static const struct MemmapEntry {
 };
 
 static void create_fdt(SpikeState *s, const struct MemmapEntry *memmap,
-    uint64_t mem_size, const char *cmdline)
+                       uint64_t mem_size, const char *cmdline, bool is_32_bit)
 {
     void *fdt;
     uint64_t addr, size;
@@ -115,11 +104,11 @@ static void create_fdt(SpikeState *s, const struct MemmapEntry *memmap,
             cpu_name = g_strdup_printf("/cpus/cpu@%d",
                 s->soc[socket].hartid_base + cpu);
             qemu_fdt_add_subnode(fdt, cpu_name);
-#if defined(TARGET_RISCV32)
-            qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv32");
-#else
-            qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv48");
-#endif
+            if (is_32_bit) {
+                qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv32");
+            } else {
+                qemu_fdt_setprop_string(fdt, cpu_name, "mmu-type", "riscv,sv48");
+            }
             name = riscv_isa_string(&s->soc[socket].harts[cpu]);
             qemu_fdt_setprop_string(fdt, cpu_name, "riscv,isa", name);
             g_free(name);
@@ -254,7 +243,8 @@ static void spike_board_init(MachineState *machine)
         main_mem);
 
     /* create device tree */
-    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
+    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
+               riscv_is_32_bit(machine));
 
     /* boot rom */
     memory_region_init_rom(mask_rom, NULL, "riscv.spike.mrom",
@@ -262,9 +252,22 @@ static void spike_board_init(MachineState *machine)
     memory_region_add_subregion(system_memory, memmap[SPIKE_MROM].base,
                                 mask_rom);
 
-    firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME,
-                                                     memmap[SPIKE_DRAM].base,
-                                                     htif_symbol_callback);
+    /*
+     * Not like other RISC-V machines that use plain binary bios images,
+     * keeping ELF files here was intentional because BIN files don't work
+     * for the Spike machine as HTIF emulation depends on ELF parsing.
+     */
+    if (riscv_is_32_bit(machine)) {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv32-generic-fw_dynamic.elf",
+                                    memmap[SPIKE_DRAM].base,
+                                    htif_symbol_callback);
+    } else {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv64-generic-fw_dynamic.elf",
+                                    memmap[SPIKE_DRAM].base,
+                                    htif_symbol_callback);
+    }
 
     if (machine->kernel_filename) {
         kernel_start_addr = riscv_calc_kernel_start_addr(machine,
Signature · 1 line
2.29.2
#8 lore raw

PATCH v4 8/16 hw/riscv: sifive_u: Remove compile time XLEN checks

In reply to Alistair Francis
---
 hw/riscv/sifive_u.c | 55 ++++++++++++++++++++++++---------------------
 1 file changed, 30 insertions(+), 25 deletions(-)
hw/riscv/sifive_u.c +30 -25
index d550befadb..7216329237 100644
@@ -60,12 +60,6 @@
 
 #include <libfdt.h>
 
-#if defined(TARGET_RISCV32)
-# define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.bin"
-#else
-# define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.bin"
-#endif
-
 static const struct MemmapEntry {
     hwaddr base;
     hwaddr size;
@@ -93,7 +87,7 @@ static const struct MemmapEntry {
 #define GEM_REVISION        0x10070109
 
 static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
-    uint64_t mem_size, const char *cmdline)
+                       uint64_t mem_size, const char *cmdline, bool is_32_bit)
 {
     MachineState *ms = MACHINE(qdev_get_machine());
     void *fdt;
@@ -178,11 +172,11 @@ static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap,
         qemu_fdt_add_subnode(fdt, nodename);
         /* cpu 0 is the management hart that does not have mmu */
         if (cpu != 0) {
-#if defined(TARGET_RISCV32)
-            qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32");
-#else
-            qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48");
-#endif
+            if (is_32_bit) {
+                qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32");
+            } else {
+                qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48");
+            }
             isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]);
         } else {
             isa = riscv_isa_string(&s->soc.e_cpus.harts[0]);
@@ -458,7 +452,8 @@ static void sifive_u_machine_init(MachineState *machine)
                           qemu_allocate_irq(sifive_u_machine_reset, NULL, 0));
 
     /* create device tree */
-    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline);
+    create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
+               riscv_is_32_bit(machine));
 
     if (s->start_in_flash) {
         /*
@@ -487,8 +482,15 @@ static void sifive_u_machine_init(MachineState *machine)
         break;
     }
 
-    firmware_end_addr = riscv_find_and_load_firmware(machine, BIOS_FILENAME,
-                                                     start_addr, NULL);
+    if (riscv_is_32_bit(machine)) {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv32-generic-fw_dynamic.bin",
+                                    start_addr, NULL);
+    } else {
+        firmware_end_addr = riscv_find_and_load_firmware(machine,
+                                    "opensbi-riscv64-generic-fw_dynamic.bin",
+                                    start_addr, NULL);
+    }
 
     if (machine->kernel_filename) {
         kernel_start_addr = riscv_calc_kernel_start_addr(machine,
@@ -518,9 +520,9 @@ static void sifive_u_machine_init(MachineState *machine)
     /* Compute the fdt load address in dram */
     fdt_load_addr = riscv_load_fdt(memmap[SIFIVE_U_DEV_DRAM].base,
                                    machine->ram_size, s->fdt);
-    #if defined(TARGET_RISCV64)
-    start_addr_hi32 = start_addr >> 32;
-    #endif
+    if (!riscv_is_32_bit(machine)) {
+        start_addr_hi32 = (uint64_t)start_addr >> 32;
+    }
 
     /* reset vector */
     uint32_t reset_vec[11] = {
@@ -528,13 +530,8 @@ static void sifive_u_machine_init(MachineState *machine)
         0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(fw_dyn) */
         0x02828613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
         0xf1402573,                    /*     csrr   a0, mhartid  */
-#if defined(TARGET_RISCV32)
-        0x0202a583,                    /*     lw     a1, 32(t0) */
-        0x0182a283,                    /*     lw     t0, 24(t0) */
-#elif defined(TARGET_RISCV64)
-        0x0202b583,                    /*     ld     a1, 32(t0) */
-        0x0182b283,                    /*     ld     t0, 24(t0) */
-#endif
+        0,
+        0,
         0x00028067,                    /*     jr     t0 */
         start_addr,                    /* start: .dword */
         start_addr_hi32,
@@ -542,6 +539,14 @@ static void sifive_u_machine_init(MachineState *machine)
         0x00000000,
                                        /* fw_dyn: */
     };
+    if (riscv_is_32_bit(machine)) {
+        reset_vec[4] = 0x0202a583;     /*     lw     a1, 32(t0) */
+        reset_vec[5] = 0x0182a283;     /*     lw     t0, 24(t0) */
+    } else {
+        reset_vec[4] = 0x0202b583;     /*     ld     a1, 32(t0) */
+        reset_vec[5] = 0x0182b283;     /*     ld     t0, 24(t0) */
+    }
+
 
     /* copy in the reset vector in little_endian byte order */
     for (i = 0; i < ARRAY_SIZE(reset_vec); i++) {
Signature · 1 line
2.29.2
Reviewed-by Tested-by on v4 8/16
#9 lore raw

Re: [PATCH v4 08/16] hw/riscv: sifive_u: Remove compile time XLEN checks

Quoted 8 lines · Alistair Francis
---
 hw/riscv/sifive_u.c | 55 ++++++++++++++++++++++++---------------------
 1 file changed, 30 insertions(+), 25 deletions(-)

Tested with 64-bit sifive_u

32-bit is blocked by:
http://lists.infradead.org/pipermail/linux-riscv/2020-December/003927.html

Regards,
Bin

#10 lore raw

PATCH v4 9/16 target/riscv: fpu_helper: Match function defs in HELPER macros

In reply to Alistair Francis

Update the function definitions generated in helper.h to match the actual function implementations.

Also remove all compile time XLEN checks when building.

---
 target/riscv/helper.h     | 24 ++++++++----------------
 target/riscv/fpu_helper.c |  8 --------
 2 files changed, 8 insertions(+), 24 deletions(-)
target/riscv/helper.h +8 -16
index 939731c345..e3f3f41e89 100644
@@ -27,16 +27,12 @@ DEF_HELPER_FLAGS_3(flt_s, TCG_CALL_NO_RWG, tl, env, i64, i64)
 DEF_HELPER_FLAGS_3(feq_s, TCG_CALL_NO_RWG, tl, env, i64, i64)
 DEF_HELPER_FLAGS_2(fcvt_w_s, TCG_CALL_NO_RWG, tl, env, i64)
 DEF_HELPER_FLAGS_2(fcvt_wu_s, TCG_CALL_NO_RWG, tl, env, i64)
-#if defined(TARGET_RISCV64)
-DEF_HELPER_FLAGS_2(fcvt_l_s, TCG_CALL_NO_RWG, tl, env, i64)
-DEF_HELPER_FLAGS_2(fcvt_lu_s, TCG_CALL_NO_RWG, tl, env, i64)
-#endif
+DEF_HELPER_FLAGS_2(fcvt_l_s, TCG_CALL_NO_RWG, i64, env, i64)
+DEF_HELPER_FLAGS_2(fcvt_lu_s, TCG_CALL_NO_RWG, i64, env, i64)
 DEF_HELPER_FLAGS_2(fcvt_s_w, TCG_CALL_NO_RWG, i64, env, tl)
 DEF_HELPER_FLAGS_2(fcvt_s_wu, TCG_CALL_NO_RWG, i64, env, tl)
-#if defined(TARGET_RISCV64)
-DEF_HELPER_FLAGS_2(fcvt_s_l, TCG_CALL_NO_RWG, i64, env, tl)
-DEF_HELPER_FLAGS_2(fcvt_s_lu, TCG_CALL_NO_RWG, i64, env, tl)
-#endif
+DEF_HELPER_FLAGS_2(fcvt_s_l, TCG_CALL_NO_RWG, i64, env, i64)
+DEF_HELPER_FLAGS_2(fcvt_s_lu, TCG_CALL_NO_RWG, i64, env, i64)
 DEF_HELPER_FLAGS_1(fclass_s, TCG_CALL_NO_RWG_SE, tl, i64)
 
 /* Floating Point - Double Precision */
@@ -54,16 +50,12 @@ DEF_HELPER_FLAGS_3(flt_d, TCG_CALL_NO_RWG, tl, env, i64, i64)
 DEF_HELPER_FLAGS_3(feq_d, TCG_CALL_NO_RWG, tl, env, i64, i64)
 DEF_HELPER_FLAGS_2(fcvt_w_d, TCG_CALL_NO_RWG, tl, env, i64)
 DEF_HELPER_FLAGS_2(fcvt_wu_d, TCG_CALL_NO_RWG, tl, env, i64)
-#if defined(TARGET_RISCV64)
-DEF_HELPER_FLAGS_2(fcvt_l_d, TCG_CALL_NO_RWG, tl, env, i64)
-DEF_HELPER_FLAGS_2(fcvt_lu_d, TCG_CALL_NO_RWG, tl, env, i64)
-#endif
+DEF_HELPER_FLAGS_2(fcvt_l_d, TCG_CALL_NO_RWG, i64, env, i64)
+DEF_HELPER_FLAGS_2(fcvt_lu_d, TCG_CALL_NO_RWG, i64, env, i64)
 DEF_HELPER_FLAGS_2(fcvt_d_w, TCG_CALL_NO_RWG, i64, env, tl)
 DEF_HELPER_FLAGS_2(fcvt_d_wu, TCG_CALL_NO_RWG, i64, env, tl)
-#if defined(TARGET_RISCV64)
-DEF_HELPER_FLAGS_2(fcvt_d_l, TCG_CALL_NO_RWG, i64, env, tl)
-DEF_HELPER_FLAGS_2(fcvt_d_lu, TCG_CALL_NO_RWG, i64, env, tl)
-#endif
+DEF_HELPER_FLAGS_2(fcvt_d_l, TCG_CALL_NO_RWG, i64, env, i64)
+DEF_HELPER_FLAGS_2(fcvt_d_lu, TCG_CALL_NO_RWG, i64, env, i64)
 DEF_HELPER_FLAGS_1(fclass_d, TCG_CALL_NO_RWG_SE, tl, i64)
 
 /* Special functions */
target/riscv/fpu_helper.c +0 -8
index bb346a8249..7c4ab92ecb 100644
@@ -223,7 +223,6 @@ target_ulong helper_fcvt_wu_s(CPURISCVState *env, uint64_t rs1)
     return (int32_t)float32_to_uint32(frs1, &env->fp_status);
 }
 
-#if defined(TARGET_RISCV64)
 uint64_t helper_fcvt_l_s(CPURISCVState *env, uint64_t rs1)
 {
     float32 frs1 = check_nanbox_s(rs1);
@@ -235,7 +234,6 @@ uint64_t helper_fcvt_lu_s(CPURISCVState *env, uint64_t rs1)
     float32 frs1 = check_nanbox_s(rs1);
     return float32_to_uint64(frs1, &env->fp_status);
 }
-#endif
 
 uint64_t helper_fcvt_s_w(CPURISCVState *env, target_ulong rs1)
 {
@@ -247,7 +245,6 @@ uint64_t helper_fcvt_s_wu(CPURISCVState *env, target_ulong rs1)
     return nanbox_s(uint32_to_float32((uint32_t)rs1, &env->fp_status));
 }
 
-#if defined(TARGET_RISCV64)
 uint64_t helper_fcvt_s_l(CPURISCVState *env, uint64_t rs1)
 {
     return nanbox_s(int64_to_float32(rs1, &env->fp_status));
@@ -257,7 +254,6 @@ uint64_t helper_fcvt_s_lu(CPURISCVState *env, uint64_t rs1)
 {
     return nanbox_s(uint64_to_float32(rs1, &env->fp_status));
 }
-#endif
 
 target_ulong helper_fclass_s(uint64_t rs1)
 {
@@ -336,7 +332,6 @@ target_ulong helper_fcvt_wu_d(CPURISCVState *env, uint64_t frs1)
     return (int32_t)float64_to_uint32(frs1, &env->fp_status);
 }
 
-#if defined(TARGET_RISCV64)
 uint64_t helper_fcvt_l_d(CPURISCVState *env, uint64_t frs1)
 {
     return float64_to_int64(frs1, &env->fp_status);
@@ -346,7 +341,6 @@ uint64_t helper_fcvt_lu_d(CPURISCVState *env, uint64_t frs1)
 {
     return float64_to_uint64(frs1, &env->fp_status);
 }
-#endif
 
 uint64_t helper_fcvt_d_w(CPURISCVState *env, target_ulong rs1)
 {
@@ -358,7 +352,6 @@ uint64_t helper_fcvt_d_wu(CPURISCVState *env, target_ulong rs1)
     return uint32_to_float64((uint32_t)rs1, &env->fp_status);
 }
 
-#if defined(TARGET_RISCV64)
 uint64_t helper_fcvt_d_l(CPURISCVState *env, uint64_t rs1)
 {
     return int64_to_float64(rs1, &env->fp_status);
@@ -368,7 +361,6 @@ uint64_t helper_fcvt_d_lu(CPURISCVState *env, uint64_t rs1)
 {
     return uint64_to_float64(rs1, &env->fp_status);
 }
-#endif
 
 target_ulong helper_fclass_d(uint64_t frs1)
 {
Signature · 1 line
2.29.2
#11 lore raw

PATCH v4 10/16 target/riscv: Add a riscv_cpu_is_32bit() helper function

In reply to Alistair Francis
---
 target/riscv/cpu.h | 2 ++
 target/riscv/cpu.c | 9 +++++++++
 2 files changed, 11 insertions(+)
target/riscv/cpu.h +2 -0
index 9c064f3094..6339e84819 100644
@@ -384,6 +384,8 @@ FIELD(TB_FLAGS, VILL, 8, 1)
 /* Is a Hypervisor instruction load/store allowed? */
 FIELD(TB_FLAGS, HLSX, 9, 1)
 
+bool riscv_cpu_is_32bit(CPURISCVState *env);
+
 /*
  * A simplification for VLMAX
  * = (1 << LMUL) * VLEN / (8 * (1 << SEW))
target/riscv/cpu.c +9 -0
index 6a0264fc6b..32a6916b8a 100644
@@ -108,6 +108,15 @@ const char *riscv_cpu_get_trap_name(target_ulong cause, bool async)
     }
 }
 
+bool riscv_cpu_is_32bit(CPURISCVState *env)
+{
+    if (env->misa & RV64) {
+        return false;
+    }
+
+    return true;
+}
+
 static void set_misa(CPURISCVState *env, target_ulong misa)
 {
     env->misa_mask = env->misa = misa;
Signature · 1 line
2.29.2
#12 lore raw

PATCH v4 11/16 target/riscv: Specify the XLEN for CPUs

In reply to Alistair Francis
---
 target/riscv/cpu.c | 33 +++++++++++++++++++++++----------
 1 file changed, 23 insertions(+), 10 deletions(-)
target/riscv/cpu.c +23 -10
index 32a6916b8a..7d6f032122 100644
@@ -158,22 +158,36 @@ static void riscv_base_cpu_init(Object *obj)
     set_misa(env, 0);
 }
 
-static void rvxx_sifive_u_cpu_init(Object *obj)
+#ifdef TARGET_RISCV64
+static void rv64_sifive_u_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
-    set_misa(env, RVXLEN | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
+    set_misa(env, RV64 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
     set_priv_version(env, PRIV_VERSION_1_10_0);
 }
 
-static void rvxx_sifive_e_cpu_init(Object *obj)
+static void rv64_sifive_e_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
-    set_misa(env, RVXLEN | RVI | RVM | RVA | RVC | RVU);
+    set_misa(env, RV64 | RVI | RVM | RVA | RVC | RVU);
     set_priv_version(env, PRIV_VERSION_1_10_0);
     qdev_prop_set_bit(DEVICE(obj), "mmu", false);
 }
+#else
+static void rv32_sifive_u_cpu_init(Object *obj)
+{
+    CPURISCVState *env = &RISCV_CPU(obj)->env;
+    set_misa(env, RV32 | RVI | RVM | RVA | RVF | RVD | RVC | RVS | RVU);
+    set_priv_version(env, PRIV_VERSION_1_10_0);
+}
 
-#if defined(TARGET_RISCV32)
+static void rv32_sifive_e_cpu_init(Object *obj)
+{
+    CPURISCVState *env = &RISCV_CPU(obj)->env;
+    set_misa(env, RV32 | RVI | RVM | RVA | RVC | RVU);
+    set_priv_version(env, PRIV_VERSION_1_10_0);
+    qdev_prop_set_bit(DEVICE(obj), "mmu", false);
+}
 
 static void rv32_ibex_cpu_init(Object *obj)
 {
@@ -191,7 +205,6 @@ static void rv32_imafcu_nommu_cpu_init(Object *obj)
     set_resetvec(env, DEFAULT_RSTVEC);
     qdev_prop_set_bit(DEVICE(obj), "mmu", false);
 }
-
 #endif
 
 static ObjectClass *riscv_cpu_class_by_name(const char *cpu_model)
@@ -643,13 +656,13 @@ static const TypeInfo riscv_cpu_type_infos[] = {
 #if defined(TARGET_RISCV32)
     DEFINE_CPU(TYPE_RISCV_CPU_BASE32,           riscv_base_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_IBEX,             rv32_ibex_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rvxx_sifive_e_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rv32_sifive_e_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34,       rv32_imafcu_nommu_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rvxx_sifive_u_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rv32_sifive_u_cpu_init),
 #elif defined(TARGET_RISCV64)
     DEFINE_CPU(TYPE_RISCV_CPU_BASE64,           riscv_base_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rvxx_sifive_e_cpu_init),
-    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rvxx_sifive_u_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rv64_sifive_e_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rv64_sifive_u_cpu_init),
 #endif
 };
 
Signature · 1 line
2.29.2
#13 lore raw

PATCH v4 12/16 target/riscv: cpu: Remove compile time XLEN checks

In reply to Alistair Francis
---
 target/riscv/cpu.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
target/riscv/cpu.c +10 -9
index 7d6f032122..47b738c314 100644
@@ -240,10 +240,10 @@ static void riscv_cpu_dump_state(CPUState *cs, FILE *f, int flags)
 #ifndef CONFIG_USER_ONLY
     qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mhartid ", env->mhartid);
     qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mstatus ", (target_ulong)env->mstatus);
-#ifdef TARGET_RISCV32
-    qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mstatush ",
-                 (target_ulong)(env->mstatus >> 32));
-#endif
+    if (riscv_cpu_is_32bit(env)) {
+        qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "mstatush ",
+                     (target_ulong)(env->mstatus >> 32));
+    }
     if (riscv_has_ext(env, RVH)) {
         qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "hstatus ", env->hstatus);
         qemu_fprintf(f, " %s " TARGET_FMT_lx "\n", "vsstatus ",
@@ -356,11 +356,12 @@ static void riscv_cpu_reset(DeviceState *dev)
 
 static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info *info)
 {
-#if defined(TARGET_RISCV32)
-    info->print_insn = print_insn_riscv32;
-#elif defined(TARGET_RISCV64)
-    info->print_insn = print_insn_riscv64;
-#endif
+    RISCVCPU *cpu = RISCV_CPU(s);
+    if (riscv_cpu_is_32bit(&cpu->env)) {
+        info->print_insn = print_insn_riscv32;
+    } else {
+        info->print_insn = print_insn_riscv64;
+    }
 }
 
 static void riscv_cpu_realize(DeviceState *dev, Error **errp)
Signature · 1 line
2.29.2
Tested-by on v4 12/16
#14 lore raw

Re: [PATCH v4 12/16] target/riscv: cpu: Remove compile time XLEN checks

Quoted 10 lines · Alistair Francis
---
 target/riscv/cpu.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)
#15 lore raw

PATCH v4 13/16 target/riscv: cpu_helper: Remove compile time XLEN checks

In reply to Alistair Francis
---
 target/riscv/cpu_helper.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
target/riscv/cpu_helper.c +7 -5
index a2787b1d48..1fc9273cea 100644
@@ -446,11 +446,13 @@ restart:
             return TRANSLATE_PMP_FAIL;
         }
 
-#if defined(TARGET_RISCV32)
-        target_ulong pte = address_space_ldl(cs->as, pte_addr, attrs, &res);
-#elif defined(TARGET_RISCV64)
-        target_ulong pte = address_space_ldq(cs->as, pte_addr, attrs, &res);
-#endif
+        target_ulong pte;
+        if (riscv_cpu_is_32bit(env)) {
+            pte = address_space_ldl(cs->as, pte_addr, attrs, &res);
+        } else {
+            pte = address_space_ldq(cs->as, pte_addr, attrs, &res);
+        }
+
         if (res != MEMTX_OK) {
             return TRANSLATE_FAIL;
         }
Signature · 1 line
2.29.2
Reviewed-by Tested-by on v4 13/16
#16 lore raw

Re: [PATCH v4 13/16] target/riscv: cpu_helper: Remove compile time XLEN checks

Quoted 9 lines · Alistair Francis
---
 target/riscv/cpu_helper.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
#17 lore raw

PATCH v4 14/16 target/riscv: csr: Remove compile time XLEN checks

In reply to Alistair Francis
---
 target/riscv/cpu_bits.h |   4 +-
 target/riscv/csr.c      | 176 +++++++++++++++++++++-------------------
 2 files changed, 92 insertions(+), 88 deletions(-)
target/riscv/cpu_bits.h +1 -3
index 24b24c69c5..1337269ae8 100644
@@ -437,9 +437,7 @@
 #define HSTATUS_VGEIN        0x0003F000
 #define HSTATUS_VTVM         0x00100000
 #define HSTATUS_VTSR         0x00400000
-#if defined(TARGET_RISCV64)
-#define HSTATUS_VSXL        0x300000000
-#endif
+#define HSTATUS_VSXL         0x300000000
 
 #define HSTATUS32_WPRI       0xFF8FF87E
 #define HSTATUS64_WPRI       0xFFFFFFFFFF8FF87EULL
target/riscv/csr.c +91 -85

342 lines not on this page · raw message

Signature · 1 line
2.29.2
Tested-by on v4 14/16
#18 lore raw

Re: [PATCH v4 14/16] target/riscv: csr: Remove compile time XLEN checks

Quoted 10 lines · Alistair Francis
---
 target/riscv/cpu_bits.h |   4 +-
 target/riscv/csr.c      | 176 +++++++++++++++++++++-------------------
 2 files changed, 92 insertions(+), 88 deletions(-)
#19 lore raw

PATCH v4 15/16 target/riscv: cpu: Set XLEN independently from target

In reply to Alistair Francis
---
 target/riscv/cpu.c | 25 ++++++++++++++++---------
 1 file changed, 16 insertions(+), 9 deletions(-)
target/riscv/cpu.c +16 -9
index 47b738c314..254cd83f8b 100644
@@ -151,14 +151,14 @@ static void riscv_any_cpu_init(Object *obj)
     set_priv_version(env, PRIV_VERSION_1_11_0);
 }
 
-static void riscv_base_cpu_init(Object *obj)
+#if defined(TARGET_RISCV64)
+static void rv64_base_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
     /* We set this in the realise function */
-    set_misa(env, 0);
+    set_misa(env, RV64);
 }
 
-#ifdef TARGET_RISCV64
 static void rv64_sifive_u_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
@@ -174,6 +174,13 @@ static void rv64_sifive_e_cpu_init(Object *obj)
     qdev_prop_set_bit(DEVICE(obj), "mmu", false);
 }
 #else
+static void rv32_base_cpu_init(Object *obj)
+{
+    CPURISCVState *env = &RISCV_CPU(obj)->env;
+    /* We set this in the realise function */
+    set_misa(env, RV32);
+}
+
 static void rv32_sifive_u_cpu_init(Object *obj)
 {
     CPURISCVState *env = &RISCV_CPU(obj)->env;
@@ -372,7 +379,7 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
     RISCVCPUClass *mcc = RISCV_CPU_GET_CLASS(dev);
     int priv_version = PRIV_VERSION_1_11_0;
     int vext_version = VEXT_VERSION_0_07_1;
-    target_ulong target_misa = 0;
+    target_ulong target_misa = env->misa;
     Error *local_err = NULL;
 
     cpu_exec_realizefn(cs, &local_err);
@@ -407,8 +414,8 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
 
     set_resetvec(env, cpu->cfg.resetvec);
 
-    /* If misa isn't set (rv32 and rv64 machines) set it here */
-    if (!env->misa) {
+    /* If only XLEN is set for misa, then set misa from properties */
+    if (env->misa == RV32 || env->misa == RV64) {
         /* Do some ISA extension error checking */
         if (cpu->cfg.ext_i && cpu->cfg.ext_e) {
             error_setg(errp,
@@ -504,7 +511,7 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp)
             set_vext_version(env, vext_version);
         }
 
-        set_misa(env, RVXLEN | target_misa);
+        set_misa(env, target_misa);
     }
 
     riscv_cpu_register_gdb_regs_for_features(cs);
@@ -655,13 +662,13 @@ static const TypeInfo riscv_cpu_type_infos[] = {
     },
     DEFINE_CPU(TYPE_RISCV_CPU_ANY,              riscv_any_cpu_init),
 #if defined(TARGET_RISCV32)
-    DEFINE_CPU(TYPE_RISCV_CPU_BASE32,           riscv_base_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_BASE32,           rv32_base_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_IBEX,             rv32_ibex_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E31,       rv32_sifive_e_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E34,       rv32_imafcu_nommu_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U34,       rv32_sifive_u_cpu_init),
 #elif defined(TARGET_RISCV64)
-    DEFINE_CPU(TYPE_RISCV_CPU_BASE64,           riscv_base_cpu_init),
+    DEFINE_CPU(TYPE_RISCV_CPU_BASE64,           rv64_base_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_E51,       rv64_sifive_e_cpu_init),
     DEFINE_CPU(TYPE_RISCV_CPU_SIFIVE_U54,       rv64_sifive_u_cpu_init),
 #endif
Signature · 1 line
2.29.2
#20 lore raw

PATCH v4 16/16 hw/riscv: Use the CPU to determine if 32-bit

In reply to Alistair Francis

Instead of using string compares to determine if a RISC-V machine is using 32-bit or 64-bit CPUs we can use the initalised CPUs. This avoids us having to maintain a list of CPU names to compare against.

This commit also fixes the name of the function to match the riscv_cpu_is_32bit() function.

---
 include/hw/riscv/boot.h |  8 +++++---
 hw/riscv/boot.c         | 31 ++++++++++---------------------
 hw/riscv/sifive_u.c     | 10 +++++-----
 hw/riscv/spike.c        |  8 ++++----
 hw/riscv/virt.c         |  9 +++++----
 5 files changed, 29 insertions(+), 37 deletions(-)
include/hw/riscv/boot.h +5 -3
index b6d37a91d6..20ff5fe5e5 100644
@@ -22,10 +22,11 @@
 
 #include "exec/cpu-defs.h"
 #include "hw/loader.h"
+#include "hw/riscv/riscv_hart.h"
 
-bool riscv_is_32_bit(MachineState *machine);
+bool riscv_is_32bit(RISCVHartArrayState harts);
 
-target_ulong riscv_calc_kernel_start_addr(MachineState *machine,
+target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState harts,
                                           target_ulong firmware_end_addr);
 target_ulong riscv_find_and_load_firmware(MachineState *machine,
                                           const char *default_machine_firmware,
@@ -41,7 +42,8 @@ target_ulong riscv_load_kernel(const char *kernel_filename,
 hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size,
                          uint64_t kernel_entry, hwaddr *start);
 uint32_t riscv_load_fdt(hwaddr dram_start, uint64_t dram_size, void *fdt);
-void riscv_setup_rom_reset_vec(MachineState *machine, hwaddr saddr,
+void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState harts,
+                               hwaddr saddr,
                                hwaddr rom_base, hwaddr rom_size,
                                uint64_t kernel_entry,
                                uint32_t fdt_load_addr, void *fdt);
hw/riscv/boot.c +10 -21
index 6bce6fb485..83586aef41 100644
@@ -33,28 +33,16 @@
 
 #include <libfdt.h>
 
-bool riscv_is_32_bit(MachineState *machine)
+bool riscv_is_32bit(RISCVHartArrayState harts)
 {
-    /*
-     * To determine if the CPU is 32-bit we need to check a few different CPUs.
-     *
-     * If the CPU starts with rv32
-     * If the CPU is a sifive 3 seriries CPU (E31, U34)
-     * If it's the Ibex CPU
-     */
-    if (!strncmp(machine->cpu_type, "rv32", 4) ||
-        (!strncmp(machine->cpu_type, "sifive", 6) &&
-            machine->cpu_type[8] == '3') ||
-        !strncmp(machine->cpu_type, "lowrisc-ibex", 12)) {
-        return true;
-    } else {
-        return false;
-    }
+    RISCVCPU hart = harts.harts[0];
+
+    return riscv_cpu_is_32bit(&hart.env);
 }
 
-target_ulong riscv_calc_kernel_start_addr(MachineState *machine,
+target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState harts,
                                           target_ulong firmware_end_addr) {
-    if (riscv_is_32_bit(machine)) {
+    if (riscv_is_32bit(harts)) {
         return QEMU_ALIGN_UP(firmware_end_addr, 4 * MiB);
     } else {
         return QEMU_ALIGN_UP(firmware_end_addr, 2 * MiB);
@@ -259,7 +247,8 @@ void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
                            &address_space_memory);
 }
 
-void riscv_setup_rom_reset_vec(MachineState *machine, hwaddr start_addr,
+void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState harts,
+                               hwaddr start_addr,
                                hwaddr rom_base, hwaddr rom_size,
                                uint64_t kernel_entry,
                                uint32_t fdt_load_addr, void *fdt)
@@ -267,7 +256,7 @@ void riscv_setup_rom_reset_vec(MachineState *machine, hwaddr start_addr,
     int i;
     uint32_t start_addr_hi32 = 0x00000000;
 
-    if (!riscv_is_32_bit(machine)) {
+    if (!riscv_is_32bit(harts)) {
         start_addr_hi32 = start_addr >> 32;
     }
     /* reset vector */
@@ -284,7 +273,7 @@ void riscv_setup_rom_reset_vec(MachineState *machine, hwaddr start_addr,
         0x00000000,
                                      /* fw_dyn: */
     };
-    if (riscv_is_32_bit(machine)) {
+    if (riscv_is_32bit(harts)) {
         reset_vec[3] = 0x0202a583;   /*     lw     a1, 32(t0) */
         reset_vec[4] = 0x0182a283;   /*     lw     t0, 24(t0) */
     } else {
hw/riscv/sifive_u.c +5 -5
index 7216329237..62750007a5 100644
@@ -453,7 +453,7 @@ static void sifive_u_machine_init(MachineState *machine)
 
     /* create device tree */
     create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
-               riscv_is_32_bit(machine));
+               riscv_is_32bit(s->soc.u_cpus));
 
     if (s->start_in_flash) {
         /*
@@ -482,7 +482,7 @@ static void sifive_u_machine_init(MachineState *machine)
         break;
     }
 
-    if (riscv_is_32_bit(machine)) {
+    if (riscv_is_32bit(s->soc.u_cpus)) {
         firmware_end_addr = riscv_find_and_load_firmware(machine,
                                     "opensbi-riscv32-generic-fw_dynamic.bin",
                                     start_addr, NULL);
@@ -493,7 +493,7 @@ static void sifive_u_machine_init(MachineState *machine)
     }
 
     if (machine->kernel_filename) {
-        kernel_start_addr = riscv_calc_kernel_start_addr(machine,
+        kernel_start_addr = riscv_calc_kernel_start_addr(s->soc.u_cpus,
                                                          firmware_end_addr);
 
         kernel_entry = riscv_load_kernel(machine->kernel_filename,
@@ -520,7 +520,7 @@ static void sifive_u_machine_init(MachineState *machine)
     /* Compute the fdt load address in dram */
     fdt_load_addr = riscv_load_fdt(memmap[SIFIVE_U_DEV_DRAM].base,
                                    machine->ram_size, s->fdt);
-    if (!riscv_is_32_bit(machine)) {
+    if (!riscv_is_32bit(s->soc.u_cpus)) {
         start_addr_hi32 = (uint64_t)start_addr >> 32;
     }
 
@@ -539,7 +539,7 @@ static void sifive_u_machine_init(MachineState *machine)
         0x00000000,
                                        /* fw_dyn: */
     };
-    if (riscv_is_32_bit(machine)) {
+    if (riscv_is_32bit(s->soc.u_cpus)) {
         reset_vec[4] = 0x0202a583;     /*     lw     a1, 32(t0) */
         reset_vec[5] = 0x0182a283;     /*     lw     t0, 24(t0) */
     } else {
hw/riscv/spike.c +4 -4
index 3e47e4579d..e723ca0ac9 100644
@@ -244,7 +244,7 @@ static void spike_board_init(MachineState *machine)
 
     /* create device tree */
     create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
-               riscv_is_32_bit(machine));
+               riscv_is_32bit(s->soc[0]));
 
     /* boot rom */
     memory_region_init_rom(mask_rom, NULL, "riscv.spike.mrom",
@@ -257,7 +257,7 @@ static void spike_board_init(MachineState *machine)
      * keeping ELF files here was intentional because BIN files don't work
      * for the Spike machine as HTIF emulation depends on ELF parsing.
      */
-    if (riscv_is_32_bit(machine)) {
+    if (riscv_is_32bit(s->soc[0])) {
         firmware_end_addr = riscv_find_and_load_firmware(machine,
                                     "opensbi-riscv32-generic-fw_dynamic.elf",
                                     memmap[SPIKE_DRAM].base,
@@ -270,7 +270,7 @@ static void spike_board_init(MachineState *machine)
     }
 
     if (machine->kernel_filename) {
-        kernel_start_addr = riscv_calc_kernel_start_addr(machine,
+        kernel_start_addr = riscv_calc_kernel_start_addr(s->soc[0],
                                                          firmware_end_addr);
 
         kernel_entry = riscv_load_kernel(machine->kernel_filename,
@@ -299,7 +299,7 @@ static void spike_board_init(MachineState *machine)
     fdt_load_addr = riscv_load_fdt(memmap[SPIKE_DRAM].base,
                                    machine->ram_size, s->fdt);
     /* load the reset vector */
-    riscv_setup_rom_reset_vec(machine, memmap[SPIKE_DRAM].base,
+    riscv_setup_rom_reset_vec(machine, s->soc[0], memmap[SPIKE_DRAM].base,
                               memmap[SPIKE_MROM].base,
                               memmap[SPIKE_MROM].size, kernel_entry,
                               fdt_load_addr, s->fdt);
hw/riscv/virt.c +5 -4
index 915e9ae216..485a410da7 100644
@@ -603,7 +603,7 @@ static void virt_machine_init(MachineState *machine)
 
     /* create device tree */
     create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline,
-               riscv_is_32_bit(machine));
+               riscv_is_32bit(s->soc[0]));
 
     /* boot rom */
     memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom",
@@ -611,7 +611,7 @@ static void virt_machine_init(MachineState *machine)
     memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base,
                                 mask_rom);
 
-    if (riscv_is_32_bit(machine)) {
+    if (riscv_is_32bit(s->soc[0])) {
         firmware_end_addr = riscv_find_and_load_firmware(machine,
                                     "opensbi-riscv32-generic-fw_dynamic.bin",
                                     start_addr, NULL);
@@ -622,7 +622,7 @@ static void virt_machine_init(MachineState *machine)
     }
 
     if (machine->kernel_filename) {
-        kernel_start_addr = riscv_calc_kernel_start_addr(machine,
+        kernel_start_addr = riscv_calc_kernel_start_addr(s->soc[0],
                                                          firmware_end_addr);
 
         kernel_entry = riscv_load_kernel(machine->kernel_filename,
@@ -658,7 +658,8 @@ static void virt_machine_init(MachineState *machine)
     fdt_load_addr = riscv_load_fdt(memmap[VIRT_DRAM].base,
                                    machine->ram_size, s->fdt);
     /* load the reset vector */
-    riscv_setup_rom_reset_vec(machine, start_addr, virt_memmap[VIRT_MROM].base,
+    riscv_setup_rom_reset_vec(machine, s->soc[0], start_addr,
+                              virt_memmap[VIRT_MROM].base,
                               virt_memmap[VIRT_MROM].size, kernel_entry,
                               fdt_load_addr, s->fdt);
 
Signature · 1 line
2.29.2
Reviewed-by on v4 16/16
#21 lore raw

Re: [PATCH v4 16/16] hw/riscv: Use the CPU to determine if 32-bit

Quoted 7 lines · Alistair Francis

Instead of using string compares to determine if a RISC-V machine is using 32-bit or 64-bit CPUs we can use the initalised CPUs. This avoids us having to maintain a list of CPU names to compare against.

This commit also fixes the name of the function to match the riscv_cpu_is_32bit() function.

Quoted 8 lines
---
 include/hw/riscv/boot.h |  8 +++++---
 hw/riscv/boot.c         | 31 ++++++++++---------------------
 hw/riscv/sifive_u.c     | 10 +++++-----
 hw/riscv/spike.c        |  8 ++++----
 hw/riscv/virt.c         |  9 +++++----
 5 files changed, 29 insertions(+), 37 deletions(-)

r~

#22 lore raw

Re: [PATCH v4 16/16] hw/riscv: Use the CPU to determine if 32-bit

In reply to Alistair Francis
Quoted 62 lines · Alistair Francis

Instead of using string compares to determine if a RISC-V machine is using 32-bit or 64-bit CPUs we can use the initalised CPUs. This avoids us having to maintain a list of CPU names to compare against.

This commit also fixes the name of the function to match the riscv_cpu_is_32bit() function.

---
 include/hw/riscv/boot.h |  8 +++++---
 hw/riscv/boot.c         | 31 ++++++++++---------------------
 hw/riscv/sifive_u.c     | 10 +++++-----
 hw/riscv/spike.c        |  8 ++++----
 hw/riscv/virt.c         |  9 +++++----
 5 files changed, 29 insertions(+), 37 deletions(-)
include/hw/riscv/boot.h +5 -3
index b6d37a91d6..20ff5fe5e5 100644
@@ -22,10 +22,11 @@
 
 #include "exec/cpu-defs.h"
 #include "hw/loader.h"
+#include "hw/riscv/riscv_hart.h"
 
-bool riscv_is_32_bit(MachineState *machine);
+bool riscv_is_32bit(RISCVHartArrayState harts);
 
-target_ulong riscv_calc_kernel_start_addr(MachineState *machine,
+target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState harts,
                                           target_ulong firmware_end_addr);
 target_ulong riscv_find_and_load_firmware(MachineState *machine,
                                           const char *default_machine_firmware,
@@ -41,7 +42,8 @@ target_ulong riscv_load_kernel(const char *kernel_filename,
 hwaddr riscv_load_initrd(const char *filename, uint64_t mem_size,
                          uint64_t kernel_entry, hwaddr *start);
 uint32_t riscv_load_fdt(hwaddr dram_start, uint64_t dram_size, void *fdt);
-void riscv_setup_rom_reset_vec(MachineState *machine, hwaddr saddr,
+void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState harts,
+                               hwaddr saddr,
                                hwaddr rom_base, hwaddr rom_size,
                                uint64_t kernel_entry,
                                uint32_t fdt_load_addr, void *fdt);
hw/riscv/boot.c +1 -7
index 6bce6fb485..83586aef41 100644
@@ -33,28 +33,16 @@
 
 #include <libfdt.h>
 
-bool riscv_is_32_bit(MachineState *machine)
+bool riscv_is_32bit(RISCVHartArrayState harts)
 {
-    /*
-     * To determine if the CPU is 32-bit we need to check a few different CPUs.
-     *
-     * If the CPU starts with rv32
-     * If the CPU is a sifive 3 seriries CPU (E31, U34)
-     * If it's the Ibex CPU

hw/riscv/boot.c line 38

Quoted 10 lines
hw/riscv/boot.c +1 -9
-     */
-    if (!strncmp(machine->cpu_type, "rv32", 4) ||
-        (!strncmp(machine->cpu_type, "sifive", 6) &&
-            machine->cpu_type[8] == '3') ||
-        !strncmp(machine->cpu_type, "lowrisc-ibex", 12)) {
-        return true;
-    } else {
-        return false;
-    }
+    RISCVCPU hart = harts.harts[0];

What happens if something like ARM big.LITTLE needs to be supported on RISC-V?

hw/riscv/boot.c line 42

Quoted 4 lines
hw/riscv/boot.c +2 -0
+
+    return riscv_cpu_is_32bit(&hart.env);
 }
 

[snip]

Regards,
Bin

#23 lore raw

Re: [PATCH v4 16/16] hw/riscv: Use the CPU to determine if 32-bit

Quoted 1 line · Bin Meng

What happens if something like ARM big.LITTLE needs to be supported on RISC-V?

I'd say it's the board's job to pass the boot heart. (Though even big.LITTLE doesn't mix 64 and 32-bit cores.)

r~

maintainer
#24 lore raw

Re: [PATCH v4 16/16] hw/riscv: Use the CPU to determine if 32-bit

Quoted 5 lines · On Thu, 17 Dec 2020 05:58:11 PST (-0800), [email protected] wrote:
Quoted 1 line · Bin Meng

What happens if something like ARM big.LITTLE needs to be supported on RISC-V?

I'd say it's the board's job to pass the boot heart. (Though even big.LITTLE doesn't mix 64 and 32-bit cores.)

I guess we can't stop people from building crazy things, but it does seem like building a system that mixes up base ISAs is unlikely. IDK if 32-bit compatibility on 64-bit systems is ever going to be important enough to show up on RISC-V, as 32-bit might be defunct in portable systems by the point real RISC-V systems are availiable, but one could imagine systems where only a subset of cores have 32-bit compatibility. My guess is that they'd all boot into 64-bit mode, though, so that sort of stuff won't be relevant until one tries to get to 32-bit code.

Regardless of where that sort of thing goes, it seems reasonable to just ban people from spinning up mixed machine XLEN systems in QEMU for the time being. IIUC that's always been impossible (as it was a #define before), so it's not like we're regressing on any functionality with that constraint.

Other hetergenous ISA/microarctucture stuff seems reasonable to support in QEMU, but also not a high priority. It doesn't seem that hard to write the early boot stuff in a way such that it only depends on the base ISA -- that's essentially how we're handling stuff like F/D in Linux, you just either probe or handle the traps. There's already some simple hetergenous stuff floating around (like the non-MMU cores in the SiFive designs) and that all seems to work fine so my guess is we have enough stuff there, but I'm sure there'll be more work do to as more complicated designs start to show up (doubly so as there's no specs for any of this).

#25 lore raw

Re: [PATCH v4 16/16] hw/riscv: Use the CPU to determine if 32-bit

Quoted 17 lines · Palmer Dabbelt
Quoted 5 lines · On Thu, 17 Dec 2020 05:58:11 PST (-0800), [email protected] wrote:
Quoted 1 line · Bin Meng

What happens if something like ARM big.LITTLE needs to be supported on RISC-V?

I'd say it's the board's job to pass the boot heart. (Though even big.LITTLE doesn't mix 64 and 32-bit cores.)

I guess we can't stop people from building crazy things, but it does seem like building a system that mixes up base ISAs is unlikely. IDK if 32-bit compatibility on 64-bit systems is ever going to be important enough to show up on RISC-V, as 32-bit might be defunct in portable systems by the point real RISC-V systems are availiable, but one could imagine systems where only a subset of cores have 32-bit compatibility. My guess is that they'd all boot into 64-bit mode, though, so that sort of stuff won't be relevant until one tries to get to 32-bit code.

Quoted 4 lines

Regardless of where that sort of thing goes, it seems reasonable to just ban people from spinning up mixed machine XLEN systems in QEMU for the time being. IIUC that's always been impossible (as it was a #define before), so it's not like we're regressing on any functionality with that constraint.

I agree. Currently we don't get anywhere close to allowing mixed XLEN systems.

Allowing 32-bit and 64-bit CPUs on a system is a useful goal, as for example that is what the HiFive 1 has. As richard said though the main interest at this point is the boot CPU, which the board can specify different harts depending on what it is doing.

This is just the first step to making RISC-V more flexible with XLEN, there will be more patches in the future to continue improving this.

I'm going to apply this series today.

Alistair

Quoted 10 lines

Other hetergenous ISA/microarctucture stuff seems reasonable to support in QEMU, but also not a high priority. It doesn't seem that hard to write the early boot stuff in a way such that it only depends on the base ISA -- that's essentially how we're handling stuff like F/D in Linux, you just either probe or handle the traps. There's already some simple hetergenous stuff floating around (like the non-MMU cores in the SiFive designs) and that all seems to work fine so my guess is we have enough stuff there, but I'm sure there'll be more work do to as more complicated designs start to show up (doubly so as there's no specs for any of this).