dt-bindings: arm: ti: Add bindings for PHYTEC AM68x based hardware
Subsystems (2)
PATCH v3 1/3 dt-bindings: arm: ti: Add bindings for PHYTEC AM68x based hardware
Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM and the phyBOARD-Izar carrier board.
---
Notes:
Changes in v3:
- reorganized compatibles into their own entry
Changes in v2:
- no changes
Documentation/devicetree/bindings/arm/ti/k3.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/ti/k3.yaml +7 -0
@@ -139,6 +139,13 @@ properties: - ti,j721s2-evm - const: ti,j721s2 + - description: K3 J721s2 SoC Phytec SoM based boards + items: + - enum: + - phytec,am68-phyboard-izar + - const: phytec,am68-phycore-som + - const: ti,j721s2 + - description: K3 J722S SoC and Boards items: - enum:
Signature · 1 line
2.43.0
PATCH v3 2/3 arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x
The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's AM68x/TDA4x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family.
A reference carrier board design, called phyBOARD-Izar is used for the phyCORE-AM68x/TDA4x development kit [2].
Supported features:
* Debug UART
* 2x SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* 2x I2C GPIO Expander
* LEDs
* USB 5 Gbit/s
* PCIe
For more details see the product pages for the SoM and the development kit:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[2] https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/
---
Notes:
Bootlog:
https://gist.github.com/dominiknh90/644e753c752b232117e12092e3691124
Link to v2:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Link to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Changes in v3:
- added phytec,am68-phycore-som compatible
- pickup up Acked-by: Moteen Shah
Changes in v2:
- aliases reordered
- stdout-path set to &main_uart8
- fixed coding style in serdes0 node
- dropped whitespaces in commit message
arch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am68-phyboard-izar.dts | 579 +++++++++++++++++ .../boot/dts/ti/k3-am68-phycore-som.dtsi | 594 ++++++++++++++++++ 3 files changed, 1174 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts create mode 100644 arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
arch/arm64/boot/dts/ti/Makefile +1 -0
@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo # Boards with J721s2 SoC +dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts new file +579 -0
579 lines not on this page · raw message
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +594 -0
594 lines not on this page · raw message
Signature · 1 line
2.43.0
Re: [PATCH v3 2/3] arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x
Hello Dominik,
Thanks for patch.
Few minor feedback
Quoted 67 lines · Dominik Haller
The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's AM68x/TDA4x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family.
A reference carrier board design, called phyBOARD-Izar is used for the phyCORE-AM68x/TDA4x development kit [2].
Supported features:
* Debug UART
* 2x SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* 2x I2C GPIO Expander
* LEDs
* USB 5 Gbit/s
* PCIeFor more details see the product pages for the SoM and the development kit:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[2] https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/Signed-off-by Dominik Haller <[email protected]>Acked-by Moteen Shah <[email protected]>---
Notes:
Bootlog:
https://gist.github.com/dominiknh90/644e753c752b232117e12092e3691124Link to v2:
https://lore.kernel.org/linux-arm-kernel/[email protected]/Link to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/Changes in v3:
- added phytec,am68-phycore-som compatible
- pickup up Acked-by: Moteen ShahChanges in v2:
- aliases reordered
- stdout-path set to&main_uart8
- fixed coding style in serdes0 node
- dropped whitespaces in commit messagearch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am68-phyboard-izar.dts | 579 +++++++++++++++++ .../boot/dts/ti/k3-am68-phycore-som.dtsi | 594 ++++++++++++++++++ 3 files changed, 1174 insertions(+)create mode 100644
arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dtscreate mode 100644arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsiarch/arm64/boot/dts/ti/Makefile +1
-0@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo +
arch/arm64/boot/dts/ti/Makefile dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb
Quoted 10 lines
arch/arm64/boot/dts/ti/Makefile +10
-0+&wkup_pmx1 { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */ + J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */ + >;
Please have bootph-all in case, this is boot device
arch/arm64/boot/dts/ti/Makefile
Quoted 10 lines
[..]
arch/arm64/boot/dts/ti/Makefile +9
-0+ + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */ + >; + bootph-all;
Since this is shared with TIFS fw (debug prints), then i suggest not to have flow control on this UART
Quoted 11 lines
arch/arm64/boot/dts/ti/Makefile +10
-0+ }; +}; + + +&ospi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + status = "okay"; + + flash@0 {
arch/arm64/boot/dts/ti/Makefile
Quoted 10 lines
arch/arm64/boot/dts/ti/Makefile +10
-0+ compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>;
Bootph-all here
arch/arm64/boot/dts/ti/Makefile
Quoted 10 lines
arch/arm64/boot/dts/ti/Makefile +9
-0+ }; +/* Shared with TIFS */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + uart-has-rtscts; + bootph-all; + status = "okay"; +};
Do you see possibility to keep reserve for fw ?
Quoted 7 lines
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +1
-0@@ -0,0 +1,594 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +9
-0+/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Dominik Haller <[email protected]> + * + * https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/ + +/* eMMC */ +&main_sdhci0 { + disable-wp;
I think no need to disable-wp for eMMC
Quoted 25 lines
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +24
-0+ non-removable; + ti,driver-strength-ohm = <50>; + bootph-all; + status = "okay"; +}; + + + pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck12-supply = <&vcc_3v3>; + buck3-supply = <&vcc_3v3>; + buck4-supply = <&vcc_3v3>; + buck5-supply = <&vcc_3v3>; + ldo1-supply = <&vcc_3v3>; + ldo2-supply = <&vcc_3v3>; + ldo3-supply = <&vcc_3v3>;
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi line 521
Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +10
-0+ ldo4-supply = <&vcc_3v3>; + ti,primary-pmic; + + regulators { + bucka12: buck12 { + regulator-name = "VDD_DDR_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on;
In case you want to enable ESM reset in u-boot,
Please carry bootph-all or bootph-pre-ram in one of regulator node
Quoted 2 lines
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +1
-0+ };
Re: [PATCH v3 2/3] arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x
Quoted 5 lines · Udit
Hello Dominik,
Thanks for patch.
Few minor feedback
Hello Udit,
thanks for the feedback.
Quoted 94 lines · Dominik Haller
Quoted 92 lines
The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's
AM68x/TDA4x SoC. It can be used in combination with different carrier
boards. This module can come with different sizes and models for DDR,
eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family.A reference carrier board design, called phyBOARD-Izar is used for the
phyCORE-AM68x/TDA4x development kit [2].Supported features:
* Debug UART
* 2x SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* 2x I2C GPIO Expander
* LEDs
* USB 5 Gbit/s
* PCIeFor more details see the product pages for the SoM and the development kit:
[1]
https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[2]
https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/Signed-off-by Dominik Haller <[email protected]>Acked-by Moteen Shah <[email protected]>---
Notes:
Bootlog:https://gist.github.com/dominiknh90/644e753c752b232117e12092e3691124
Link to v2:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Link to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/
Changes in v3:
- added phytec,am68-phycore-som compatible
- pickup up Acked-by: Moteen ShahChanges in v2:
- aliases reordered
- stdout-path set to&main_uart8
- fixed coding style in serdes0 node
- dropped whitespaces in commit messagearch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am68-phyboard-izar.dts | 579 +++++++++++++++++ .../boot/dts/ti/k3-am68-phycore-som.dtsi | 594 ++++++++++++++++++ 3 files changed, 1174 insertions(+)create mode 100644
arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts
create mode 100644arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsiarch/arm64/boot/dts/ti/Makefile +5
-0@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo + +&wkup_pmx1 { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /*(A19)
MCU_OSPI1_CLK*/
+J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0)/*
(D20)MCU_OSPI1_CSn0*/
+J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0)/*
(D21)MCU_OSPI1_D0*/
+J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0)/*
Quoted 8 lines
Quoted 6 lines
(G20)
MCU_OSPI1_D1*/
+J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0)/*
(C20)MCU_OSPI1_D2*/
+J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0)/*
(A20)MCU_OSPI1_D3*/
+ >;Please have bootph-all in case, this is boot device
I only plan to add OSPI0 as boot source in mainline U-boot since booting from OSPI1/QSPI won't work with the same binaries.
Quoted 18 lines
Quoted 15 lines
[..]
arch/arm64/boot/dts/ti/Makefile +4
-0+ + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /*(E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+ J721S2_WKUP_IOPAD(0xas OSPI1/QSPI needs at
least a different CONFIG_SF_DEFAULT_BUS.074,PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0)/*
(D28)WKUP_UART0_RXD*/
+J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0)/*
(D27)WKUP_UART0_TXD*/arch/arm64/boot/dts/ti/Makefile
Quoted 2 lines
arch/arm64/boot/dts/ti/Makefile +2
-0+ >; + bootph-all;
Quoted 3 lines
Since this is shared with TIFS fw (debug prints), then i suggest not to
have flow control on this UART
So if you see the flow control pins causing issues with tifs I'll drop them. And if you recommend setting the wkup_uart0 to "reserved" in the devicetree by default to begin with I'll do that too.
Quoted 17 lines
Quoted 17 lines
arch/arm64/boot/dts/ti/Makefile +14
-0+ }; +}; + + +&ospi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>;
Quoted 8 lines
arch/arm64/boot/dts/ti/Makefile
Quoted 6 lines
arch/arm64/boot/dts/ti/Makefile +6
-0+ spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>;Bootph-all here
see comment above at the pin mux node
Quoted 14 lines
arch/arm64/boot/dts/ti/Makefile
Quoted 12 lines
arch/arm64/boot/dts/ti/Makefile +9
-0+ }; +/* Shared with TIFS */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + uart-has-rtscts; + bootph-all; + status = "okay"; +};Do you see possibility to keep reserve for fw ?
see comment above at the pin mux node
Quoted 15 lines
Quoted 15 lines
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +6
-0@@ -0,0 +1,594 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Dominik Haller <[email protected]> + * + *
Quoted 8 lines
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi line 396
Quoted 6 lines
https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[..]arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +4
-0+ +/* eMMC */ +&main_sdhci0 { + disable-wp;I think no need to disable-wp for eMMC
I'll remove it. I just saw the series removing that property from all the eMMCs in the arm64/ti directory.
Quoted 42 lines
Quoted 37 lines
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +31
-0+ non-removable; + ti,driver-strength-ohm = <50>; + bootph-all; + status = "okay"; +}; + + + pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck12-supply = <&vcc_3v3>; + buck3-supply = <&vcc_3v3>; + buck4-supply = <&vcc_3v3>; + buck5-supply = <&vcc_3v3>; + ldo1-supply = <&vcc_3v3>; + ldo2-supply = <&vcc_3v3>; + ldo3-supply = <&vcc_3v3>; + ldo4-supply = <&vcc_3v3>; + ti,primary-pmic; + + regulators { + bucka12: buck12 { + regulator-name = "VDD_DDR_1V1"; + regulator-min-microvolt =<1100000>;
+ regulator-max-microvolt =
<1100000>;arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
Quoted 2 lines
arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +2
-0+ regulator-boot-on; + regulator-always-on;In case you want to enable ESM reset in u-boot,
Quoted 1 line
Please carry bootph-all or bootph-pre-ram in one of regulator node
Yes, I'll need this one. Thanks for the hint.
Quoted 4 lines
Quoted 4 lines
+ };
[..]
Re: [PATCH v3 2/3] arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x
Hi Dominik,
Quoted 48 lines · Dominik Haller
Quoted 5 lines · Udit
Hello Dominik,
Thanks for patch.
Few minor feedback
Hello Udit,
thanks for the feedback.
Quoted 39 lines · Dominik Haller
Quoted 38 lines
The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's
AM68x/TDA4x SoC. It can be used in combination with different carrier
boards. This module can come with different sizes and models for DDR,
eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family.A reference carrier board design, called phyBOARD-Izar is used for the
phyCORE-AM68x/TDA4x development kit [2].Supported features:
* Debug UART
* 2x SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* 2x I2C GPIO Expander
* LEDs
* USB 5 Gbit/s
* PCIeFor more details see the product pages for the SoM and the development kit:
[1]
https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[2]
https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/Signed-off-by Dominik Haller <[email protected]>Acked-by Moteen Shah <[email protected]>---
Quoted 7 lines
Quoted 5 lines
Quoted 5 lines
Notes:
Bootlog:[..]
Please have bootph-all in case, this is boot deviceI only plan to add OSPI0 as boot source in mainline U-boot since booting from OSPI1/QSPI won't work with the same binaries.
Ok,
Quoted 16 lines
Quoted 16 lines
Quoted 16 lines
[..]
arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts new file +4
-0+ + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /*(E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+ J721S2_WKUP_IOPAD(0xas OSPI1/QSPI needs at
least a different CONFIG_SF_DEFAULT_BUS.074,PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0)/*
(D28)WKUP_UART0_RXD*/
+J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0)/*
(D27)WKUP_UART0_TXD*/(quoted diff) +2
-0+ >; + bootph-all;
Quoted 6 lines
Quoted 3 lines
Since this is shared with TIFS fw (debug prints), then i suggest not to
have flow control on this UARTSo if you see the flow control pins causing issues with tifs I'll drop them. And if you recommend setting the
wkup_uart0to "reserved" in the devicetree by default to begin with I'll do that too.
For debug port, often flow control is not used.
I am not sure, what use case you are targeting with wkup_uart0.
But if possible , I suggest to leave this for fw usage,
reference EVM you can refer at below
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines
(quoted diff) +2
-0+ }; +};
Re: [Upstream] [PATCH v3 2/3] arm64: dts: ti: Add basic support for phyBOARD-Izar-AM68x
In reply to Dominik HallerAm 17.04.25 um 15:59 schrieb Dominik Haller:
Quoted 21 lines
The phyCORE-AM68x/TDA4x [1] is a SoM (System on Module) featuring TI's AM68x/TDA4x SoC. It can be used in combination with different carrier boards. This module can come with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs from the AM68x/TDA4x (J721S2) family.
A reference carrier board design, called phyBOARD-Izar is used for the phyCORE-AM68x/TDA4x development kit [2].
Supported features:
* Debug UART
* 2x SPI NOR Flash
* eMMC
* 2x Ethernet
* Micro SD card
* I2C EEPROM
* I2C RTC
* 2x I2C GPIO Expander
* LEDs
* USB 5 Gbit/s
* PCIe
Quoted 8 lines
For more details see the product pages for the SoM and the development kit:
[1] https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/
[2] https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/Signed-off-by Dominik Haller <[email protected]>Acked-by Moteen Shah <[email protected]>
Quoted 1,226 lines
---
Notes:
Bootlog:
https://gist.github.com/dominiknh90/644e753c752b232117e12092e3691124Link to v2:
https://lore.kernel.org/linux-arm-kernel/[email protected]/Link to v1:
https://lore.kernel.org/linux-arm-kernel/[email protected]/Changes in v3:
- added phytec,am68-phycore-som compatible
- pickup up Acked-by: Moteen ShahChanges in v2:
- aliases reordered
- stdout-path set to&main_uart8
- fixed coding style in serdes0 node
- dropped whitespaces in commit messagearch/arm64/boot/dts/ti/Makefile | 1 + .../boot/dts/ti/k3-am68-phyboard-izar.dts | 579 +++++++++++++++++ .../boot/dts/ti/k3-am68-phycore-som.dtsi | 594 ++++++++++++++++++ 3 files changed, 1174 insertions(+)create mode 100644
arch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dtscreate mode 100644arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsiarch/arm64/boot/dts/ti/Makefile +1
-0@@ -109,6 +109,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-j721e-sk-csi2-dual-imx219.dtbo # Boards with J721s2 SoC +dtb-$(CONFIG_ARCH_K3) += k3-am68-phyboard-izar.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board.dtb dtb-$(CONFIG_ARCH_K3) += k3-am68-sk-base-board-pcie1-ep.dtbo dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtbarch/arm64/boot/dts/ti/k3-am68-phyboard-izar.dts new file +579
-0@@ -0,0 +1,579 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Dominik Haller <[email protected]> + * + * https://www.phytec.eu/en/produkte/development-kits/phyboard-izar/ + */ + +/dts-v1/; + +#include <dt-bindings/leds/leds-pca9532.h> +#include <dt-bindings/net/ti-dp83867.h> +#include <dt-bindings/phy/phy-cadence.h> +#include <dt-bindings/phy/phy.h> +#include "k3-am68-phycore-som.dtsi" + +#include "k3-serdes.h" + +/ { + compatible = "phytec,am68-phyboard-izar", + "phytec,am68-phycore-som", "ti,j721s2"; + model = "PHYTEC phyBOARD-Izar-AM68x"; + + aliases { + serial0 = &wkup_uart0; + serial1 = &mcu_uart0; + serial2 = &main_uart8; + serial3 = &main_uart1; + serial4 = &main_uart2; + mmc1 = &main_sdhci1; + ethernet0 = &cpsw_port1; + }; + + chosen { + stdout-path = &main_uart8; + }; + + transceiver1: can-phy1 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + transceiver2: can-phy2 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + transceiver3: can-phy3 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + transceiver4: can-phy4 { + compatible = "ti,tcan1043"; + #phy-cells = <0>; + max-bitrate = <8000000>; + }; + + vcc_12v0: regulator-12v0 { + /* main supply */ + compatible = "regulator-fixed"; + regulator-name = "VCC_IN"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + regulator-always-on; + regulator-boot-on; + }; + + vcc_1v8: regulator-vcc-1v8 { + /* Output of TLV7158P */ + compatible = "regulator-fixed"; + regulator-name = "VCC_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_3v3>; + }; + + vcc_3v3: regulator-vcc-3v3 { + /* Output of SiC431 */ + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_5v0>; + }; + + vcc_5v0: regulator-vcc-5v0 { + /* Output of LM5116 */ + compatible = "regulator-fixed"; + regulator-name = "VCC_5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc_12v0>; + }; +}; + +&main_pmx0 { + main_i2c2_pins_default: main-i2c2-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x04c, PIN_INPUT_PULLUP, 13) /* (V27) MCASP1_AXR1.I2C2_SCL */ + J721S2_IOPAD(0x050, PIN_INPUT_PULLUP, 13) /* (W27) MCASP1_AXR2.I2C2_SDA */ + >; + }; + + main_i2c4_pins_default: main-i2c4-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) MCAN14_TX.I2C4_SCL */ + J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) MCAN13_RX.I2C4_SDA */ + >; + }; + + main_i2c5_pins_default: main-i2c5-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x01c, PIN_INPUT_PULLUP, 8) /* (Y24) MCAN15_TX.I2C5_SCL */ + J721S2_IOPAD(0x018, PIN_INPUT_PULLUP, 8) /* (W23) MCAN14_RX.I2C5_SDA */ + >; + }; + + main_gpio0_ioexp_intr_pins_default: main-gpio0-ioexp-intr-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x020, PIN_INPUT, 7) /* (AA23) MCAN15_RX.GPIO0_8 */ + >; + }; + + main_mcan1_pins_default: main-mcan1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0c8, PIN_INPUT, 4) /* (AD28) EXT_REFCLK1.MCAN1_RX */ + J721S2_IOPAD(0x06c, PIN_OUTPUT, 0) /* (V26) MCAN1_TX */ + >; + }; + + main_mcan13_pins_default: main-mcan13-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0ec, PIN_INPUT, 9) /* (AG25) TIMER_IO1.MCAN13_RX */ + J721S2_IOPAD(0x00c, PIN_OUTPUT, 0) /* (AE28) MCAN13_TX */ + >; + }; + + main_mcan16_pins_default: main-mcan16-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x028, PIN_INPUT, 0) /* (AB24) MCAN16_RX */ + J721S2_IOPAD(0x024, PIN_OUTPUT, 0) /* (Y28) MCAN16_TX */ + >; + }; + + main_mmc1_pins_default: main-mmc1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x104, PIN_INPUT, 0) /* (P23) MMC1_CLK */ + J721S2_IOPAD(0x108, PIN_INPUT, 0) /* (N24) MMC1_CMD */ + J721S2_IOPAD(0x100, PIN_INPUT, 0) /* (###) MMC1_CLKLB */ + J721S2_IOPAD(0x0fc, PIN_INPUT, 0) /* (M23) MMC1_DAT0 */ + J721S2_IOPAD(0x0f8, PIN_INPUT, 0) /* (P24) MMC1_DAT1 */ + J721S2_IOPAD(0x0f4, PIN_INPUT, 0) /* (R24) MMC1_DAT2 */ + J721S2_IOPAD(0x0f0, PIN_INPUT, 0) /* (R22) MMC1_DAT3 */ + J721S2_IOPAD(0x0e8, PIN_INPUT, 8) /* (AE25) TIMER_IO0.MMC1_SDCD */ + >; + bootph-all; + }; + + main_spi6_pins_default: main-spi6-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x030, PIN_INPUT, 8) /* (T26) GPIO0_12.SPI6_CLK */ + J721S2_IOPAD(0x080, PIN_INPUT, 8) /* (U26) MCASP0_AXR4.SPI6_CS2 */ + J721S2_IOPAD(0x0c4, PIN_OUTPUT, 8) /* (AB26) ECAP0_IN_APWM_OUT.SPI6_D0 */ + J721S2_IOPAD(0x074, PIN_INPUT, 8) /* (R28) MCAN2_TX.SPI6_D1 */ + J721S2_IOPAD(0x0dc, PIN_OUTPUT, 7) /* (AH26) SPI0_D1.GPIO0_55 */ + >; + }; + + main_uart1_pins_default: main-uart1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x05c, PIN_INPUT, 11) /* (AA26) MCASP2_AXR0.UART1_CTSn */ + J721S2_IOPAD(0x060, PIN_OUTPUT, 11) /* (AC27) MCASP2_AXR1.UART1_RTSn */ + J721S2_IOPAD(0x054, PIN_INPUT, 11) /* (Y27) MCASP2_ACLKX.UART1_RXD */ + J721S2_IOPAD(0x058, PIN_OUTPUT, 11) /* (AA27) MCASP2_AFSX.UART1_TXD */ + >; + }; + + main_uart2_pins_default: main-uart2-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0d8, PIN_INPUT, 11) /* (AG26) SPI0_D0.UART2_RXD */ + J721S2_IOPAD(0x068, PIN_OUTPUT, 11) /* (U28) MCAN0_RX.UART2_TXD */ + >; + }; + + main_uart8_pins_default: main-uart8-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0d0, PIN_INPUT, 11) /* (AF26) SPI0_CS1.UART8_RXD */ + J721S2_IOPAD(0x0d4, PIN_OUTPUT, 11) /* (AH27) SPI0_CLK.UART8_TXD */ + >; + bootph-all; + }; +}; + +&wkup_pmx1 { + mcu_fss0_ospi1_pins_default: mcu-fss0-ospi1-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (A19) MCU_OSPI1_CLK */ + J721S2_WKUP_IOPAD(0x024, PIN_OUTPUT, 0) /* (D20) MCU_OSPI1_CSn0 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (D21) MCU_OSPI1_D0 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (G20) MCU_OSPI1_D1 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (C20) MCU_OSPI1_D2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (A20) MCU_OSPI1_D3 */ + >; + }; +}; + +&wkup_pmx2 { + mcu_cpsw_pins_default: mcu-cpsw-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x02c, PIN_INPUT, 0) /* (B22) MCU_RGMII1_RD0 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (B21) MCU_RGMII1_RD1 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (C22) MCU_RGMII1_RD2 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (D23) MCU_RGMII1_RD3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (D22) MCU_RGMII1_RXC */ + J721S2_WKUP_IOPAD(0x004, PIN_INPUT, 0) /* (E23) MCU_RGMII1_RX_CTL */ + J721S2_WKUP_IOPAD(0x014, PIN_OUTPUT, 0) /* (F23) MCU_RGMII1_TD0 */ + J721S2_WKUP_IOPAD(0x010, PIN_OUTPUT, 0) /* (G22) MCU_RGMII1_TD1 */ + J721S2_WKUP_IOPAD(0x00c, PIN_OUTPUT, 0) /* (E21) MCU_RGMII1_TD2 */ + J721S2_WKUP_IOPAD(0x008, PIN_OUTPUT, 0) /* (E22) MCU_RGMII1_TD3 */ + J721S2_WKUP_IOPAD(0x018, PIN_OUTPUT, 0) /* (F21) MCU_RGMII1_TXC */ + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (F22) MCU_RGMII1_TX_CTL */ + >; + }; + + mcu_i2c1_pins_default: mcu-i2c1-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x078, PIN_INPUT_PULLUP, 0) /* (F24) WKUP_GPIO0_8.MCU_I2C1_SCL */ + J721S2_WKUP_IOPAD(0x07c, PIN_INPUT_PULLUP, 0) /* (H26) WKUP_GPIO0_9.MCU_I2C1_SDA */ + >; + }; + + mcu_mcan0_pins_default: mcu-mcan0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x054, PIN_INPUT, 0) /* (E28) MCU_MCAN0_RX */ + J721S2_WKUP_IOPAD(0x050, PIN_OUTPUT, 0) /* (E27) MCU_MCAN0_TX */ + >; + }; + + mcu_mdio_pins_default: mcu-mdio-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x034, PIN_OUTPUT, 0) /* (A21) MCU_MDIO0_MDC */ + J721S2_WKUP_IOPAD(0x030, PIN_INPUT, 0) /* (A22) MCU_MDIO0_MDIO */ + >; + }; + + mcu_spi0_pins_default: mcu-spi0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x038, PIN_INPUT, 0) /* (B27) MCU_SPI0_CLK */ + J721S2_WKUP_IOPAD(0x044, PIN_INPUT, 0) /* (B26) MCU_SPI0_CS0 */ + J721S2_WKUP_IOPAD(0x068, PIN_INPUT, 2) /* (C23) WKUP_GPIO0_4.MCU_SPI0_CS3 */ + J721S2_WKUP_IOPAD(0x03c, PIN_INPUT, 0) /* (D24) MCU_SPI0_D0 */ + J721S2_WKUP_IOPAD(0x040, PIN_INPUT, 0) /* (B25) MCU_SPI0_D1 */ + >; + }; + + mcu_uart0_pins_default: mcu-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x090, PIN_INPUT, 0) /* (B24) WKUP_GPIO0_14.MCU_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x094, PIN_OUTPUT, 0) /* (D25) WKUP_GPIO0_15.MCU_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x08c, PIN_INPUT, 0) /* (C24) WKUP_GPIO0_13.MCU_UART0_RXD */ + J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */ + >; + }; + + wkup_uart0_pins_default: wkup-uart0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x070, PIN_INPUT, 0) /* (E25) WKUP_GPIO0_6.WKUP_UART0_CTSn */ + J721S2_WKUP_IOPAD(0x074, PIN_OUTPUT, 0) /* (F28) WKUP_GPIO0_7.WKUP_UART0_RTSn */ + J721S2_WKUP_IOPAD(0x048, PIN_INPUT, 0) /* (D28) WKUP_UART0_RXD */ + J721S2_WKUP_IOPAD(0x04c, PIN_OUTPUT, 0) /* (D27) WKUP_UART0_TXD */ + >; + bootph-all; + }; +}; + +&cpsw_port1 { + phy-mode = "rgmii-rxid"; + phy-handle = <&phy0>; +}; + +&davinci_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mdio_pins_default>; + + phy0: ethernet-phy@0 { + reg = <0>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; +}; + +&i2c_som_rtc { + trickle-resistor-ohms = <3000>; +}; + +&main_i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c2_pins_default>; + status = "okay"; + + exp1: gpio@20 { + compatible = "nxp,pca9672"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "HALF/nFULL_EN", "RS485/nRS232_EN", "MCU_ETH_nRESET", "", + "PCIe_nRESET", "USB2.0-Hub_nRESET", "USB3.0-Hub_nRESET", "PEB_AV_BL_EN"; + interrupt-parent = <&main_gpio0>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + exp2: gpio@22 { + compatible = "ti,tca6424"; + reg = <0x22>; + gpio-controller; + #gpio-cells = <2>; + gpio-line-names = "RPI_GPIO4", "RPI_GPIO5", "RPI_GPIO6", "RPI_GPIO19", + "RPI_GPIO20", "RPI_GPIO21", "RPI_GPIO22", "RPI_GPIO23", + "RPI_GPIO24", "RPI_GPIO25", "RPI_GPIO26", "RPI_GPIO20", + "LVDS_BL_nEN", "LVDS_REG_nEN", "CSI_CAM0_nRESET", "CSI_CAM1_nRESET", + "CSI0_CTRL1", "CSI0_CTRL2", "CSI0_CTRL3", "CSI0_CTRL4", + "CSI1_CTRL1", "CSI1_CTRL2", "CSI1_CTRL3", "CSI1_CTRL4"; + interrupt-parent = <&main_gpio0>; + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&main_gpio0_ioexp_intr_pins_default>; + }; +}; + +/* CSI0 + RPI */ +&main_i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c4_pins_default>; +}; + +/* CSI1 + PCIe */ +&main_i2c5 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c5_pins_default>; +}; + +&main_mcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan1_pins_default>; + phys = <&transceiver1>; + status = "okay"; +}; + +&main_mcan13 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan13_pins_default>; + phys = <&transceiver2>; + status = "okay"; +}; + +&main_mcan16 { + pinctrl-names = "default"; + pinctrl-0 = <&main_mcan16_pins_default>; + phys = <&transceiver3>; + status = "okay"; +}; + +/* SD-Card */ +&main_sdhci1 { + pinctrl-0 = <&main_mmc1_pins_default>; + pinctrl-names = "default"; + disable-wp; + vmmc-supply = <&vcc_3v3>; + status = "okay"; +}; + +&main_spi6 { + pinctrl-names = "default"; + pinctrl-0 = <&main_spi6_pins_default>; + cs-gpios = <&main_gpio0 55 GPIO_ACTIVE_LOW>; + ti,spi-num-cs = <1>; + ti,pindir-d0-out-d1-in; + status = "okay"; + + tpm@0 { + compatible = "infineon,slb9670", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <10000000>; + }; +}; + +&main_uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart1_pins_default>; + uart-has-rtscts; + status = "okay"; +}; + +&main_uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart2_pins_default>; + status = "okay"; +}; + +&main_uart8 { + pinctrl-names = "default"; + pinctrl-0 = <&main_uart8_pins_default>; + /* Shared with TFA on this platform */ + power-domains = <&k3_pds 357 TI_SCI_PD_SHARED>; + bootph-all; + status = "okay"; +}; + +&mcu_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_cpsw_pins_default>; +}; + +&mcu_i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_i2c1_pins_default>; + status = "okay"; +}; + +&mcu_mcan0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_mcan0_pins_default>; + phys = <&transceiver4>; + status = "okay"; +}; + +/* RPI-Header */ +&mcu_spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_spi0_pins_default>; +}; + +/* RPI-Header */ +&mcu_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_uart0_pins_default>; + uart-has-rtscts; + status = "okay"; +}; + +&ospi1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi1_pins_default>; + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + spi-max-frequency = <40000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + }; +}; + +&pcie1_rc { + num-lanes = <1>; + phys = <&serdes0_pcie_link>; + phy-names = "pcie-phy"; + reset-gpios = <&exp1 4 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&serdes_ln_ctrl { + idle-states = <J721S2_SERDES0_LANE0_PCIE1_LANE0>, <J721S2_SERDES0_LANE1_USB>, + <J721S2_SERDES0_LANE2_EDP_LANE2>, <J721S2_SERDES0_LANE3_EDP_LANE3>; +}; + +&serdes_refclk { + clock-frequency = <100000000>; +}; + +&serdes0 { + status = "okay"; + + serdes0_pcie_link: phy@0 { + reg = <0>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + resets = <&serdes_wiz0 1>; + cdns,phy-type = <PHY_TYPE_PCIE>; + }; + + serdes0_usb_link: phy@1 { + reg = <1>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + resets = <&serdes_wiz0 2>; + cdns,phy-type = <PHY_TYPE_USB3>; + }; +}; + +&tscadc0 { + status = "okay"; + + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; + +&tscadc1 { + status = "okay"; + + adc { + ti,adc-channels = <3 4 5 6 7>; + }; +}; + +&usbss0 { + ti,vbus-divider; + status = "okay"; +}; + +&usb0 { + dr_mode = "host"; + phys = <&serdes0_usb_link>; + phy-names = "cdns3,usb3-phy"; +}; + +&usb_serdes_mux { + idle-states = <1>; /* USB0 to SERDES lane 1 */ +}; + +&wkup_i2c0 { + eeprom@57 { + compatible = "atmel,24c32"; + reg = <0x57>; + pagesize = <32>; + }; + + led-controller@62 { + compatible = "nxp,pca9533"; + reg = <0x62>; + + led-1 { + label = "user-led1"; + type = <PCA9532_TYPE_LED>; + }; + + led-2 { + label = "user-led2"; + type = <PCA9532_TYPE_LED>; + }; + + led-3 { + label = "user-led3"; + type = <PCA9532_TYPE_LED>; + }; + }; +}; + +/* Shared with TIFS */ +&wkup_uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_uart0_pins_default>; + uart-has-rtscts; + bootph-all; + status = "okay"; +};arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi new file +594
-0@@ -0,0 +1,594 @@ +// SPDX-License-Identifier: GPL-2.0-only OR MIT +/* + * Copyright (C) 2025 PHYTEC Messtechnik GmbH + * Author: Dominik Haller <[email protected]> + * + * https://www.phytec.eu/en/produkte/system-on-modules/phycore-am68x-tda4x/ + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/net/ti-dp83867.h> +#include "k3-j721s2.dtsi" + +/ { + compatible = "phytec,am68-phycore-som", "ti,j721s2"; + model = "PHYTEC phyCORE-AM68x"; + + aliases { + ethernet1 = &main_cpsw_port1; + mmc0 = &main_sdhci0; + rtc0 = &i2c_som_rtc; + }; + + memory@80000000 { + device_type = "memory"; + /* 4GB RAM */ + reg = <0x00000000 0x80000000 0x00000000 0x80000000>, + <0x00000008 0x80000000 0x00000000 0x80000000>; + bootph-all; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* global cma region */ + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x00 0x20000000>; + linux,cma-default; + }; + + secure_ddr: optee@9e800000 { + reg = <0x00 0x9e800000 0x00 0x01800000>; + alignment = <0x1000>; + no-map; + }; + + mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa0100000 0x00 0xf00000>; + no-map; + }; + + mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1000000 0x00 0x100000>; + no-map; + }; + + mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa1100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core0_memory_region: r5f-memory@a2100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa2100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3000000 0x00 0x100000>; + no-map; + }; + + main_r5fss0_core1_memory_region: r5f-memory@a3100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa3100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core0_memory_region: r5f-memory@a4100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa4100000 0x00 0xf00000>; + no-map; + }; + + main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5000000 0x00 0x100000>; + no-map; + }; + + main_r5fss1_core1_memory_region: r5f-memory@a5100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa5100000 0x00 0xf00000>; + no-map; + }; + + c71_0_dma_memory_region: c71-dma-memory@a6000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6000000 0x00 0x100000>; + no-map; + }; + + c71_0_memory_region: c71-memory@a6100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa6100000 0x00 0xf00000>; + no-map; + }; + + c71_1_dma_memory_region: c71-dma-memory@a7000000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7000000 0x00 0x100000>; + no-map; + }; + + c71_1_memory_region: c71-memory@a7100000 { + compatible = "shared-dma-pool"; + reg = <0x00 0xa7100000 0x00 0xf00000>; + no-map; + }; + + rtos_ipc_memory_region: ipc-memories@a8000000 { + reg = <0x00 0xa8000000 0x00 0x01c00000>; + alignment = <0x1000>; + no-map; + }; + }; + + vdd_sd_dv: regulator-sd { + /* Output of TLV71033 */ + compatible = "regulator-gpio"; + regulator-name = "VDD_SD_DV"; + pinctrl-names = "default"; + pinctrl-0 = <&vdd_sd_dv_pins_default>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + gpios = <&main_gpio0 1 GPIO_ACTIVE_HIGH>; + states = <3300000 0x0>, + <1800000 0x1>; + }; +}; + +&main_pmx0 { + main_cpsw_mdio_pins_default: main-cpsw-mdio-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0c0, PIN_OUTPUT, 6) /* (T28) MCASP1_AXR0.MDIO0_MDC */ + J721S2_IOPAD(0x0bc, PIN_INPUT, 6) /* (V28) MCASP1_AFSX.MDIO0_MDIO */ + >; + }; + + main_i2c0_pins_default: main-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0e0, PIN_INPUT_PULLUP, 0) /* (AH25) I2C0_SCL */ + J721S2_IOPAD(0x0e4, PIN_INPUT_PULLUP, 0) /* (AE24) I2C0_SDA */ + >; + }; + + rgmii1_pins_default: rgmii1-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x0b8, PIN_INPUT, 6) /* (AA24) MCASP1_ACLKX.RGMII1_RD0 */ + J721S2_IOPAD(0x0a0, PIN_INPUT, 6) /* (AB25) MCASP0_AXR12.RGMII1_RD1 */ + J721S2_IOPAD(0x0a4, PIN_INPUT, 6) /* (T23) MCASP0_AXR13.RGMII1_RD2 */ + J721S2_IOPAD(0x0a8, PIN_INPUT, 6) /* (U24) MCASP0_AXR14.RGMII1_RD3 */ + J721S2_IOPAD(0x0b0, PIN_INPUT, 6) /* (AD26) MCASP1_AXR3.RGMII1_RXC */ + J721S2_IOPAD(0x0ac, PIN_INPUT, 6) /* (AC25) MCASP0_AXR15.RGMII1_RX_CTL */ + J721S2_IOPAD(0x08c, PIN_OUTPUT, 6) /* (T25) MCASP0_AXR7.RGMII1_TD0 */ + J721S2_IOPAD(0x090, PIN_OUTPUT, 6) /* (W24) MCASP0_AXR8.RGMII1_TD1 */ + J721S2_IOPAD(0x094, PIN_OUTPUT, 6) /* (AA25) MCASP0_AXR9.RGMII1_TD2 */ + J721S2_IOPAD(0x098, PIN_OUTPUT, 6) /* (V25) MCASP0_AXR10.RGMII1_TD3 */ + J721S2_IOPAD(0x0b4, PIN_OUTPUT, 6) /* (U25) MCASP1_AXR4.RGMII1_TXC */ + J721S2_IOPAD(0x09c, PIN_OUTPUT, 6) /* (T24) MCASP0_AXR11.RGMII1_TX_CTL */ + >; + }; + + vdd_sd_dv_pins_default: vdd-sd-dv-default-pins { + pinctrl-single,pins = < + J721S2_IOPAD(0x004, PIN_OUTPUT, 7) /* (W25) MCAN12_TX.GPIO0_1 */ + >; + }; +}; + +&wkup_pmx0 { + mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x000, PIN_OUTPUT, 0) /* (D19) MCU_OSPI0_CLK */ + J721S2_WKUP_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F15) MCU_OSPI0_CSn0 */ + J721S2_WKUP_IOPAD(0x00c, PIN_INPUT, 0) /* (C19) MCU_OSPI0_D0 */ + J721S2_WKUP_IOPAD(0x010, PIN_INPUT, 0) /* (F16) MCU_OSPI0_D1 */ + J721S2_WKUP_IOPAD(0x014, PIN_INPUT, 0) /* (G15) MCU_OSPI0_D2 */ + J721S2_WKUP_IOPAD(0x018, PIN_INPUT, 0) /* (F18) MCU_OSPI0_D3 */ + J721S2_WKUP_IOPAD(0x01c, PIN_INPUT, 0) /* (E19) MCU_OSPI0_D4 */ + J721S2_WKUP_IOPAD(0x020, PIN_INPUT, 0) /* (G19) MCU_OSPI0_D5 */ + J721S2_WKUP_IOPAD(0x024, PIN_INPUT, 0) /* (F19) MCU_OSPI0_D6 */ + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 0) /* (F20) MCU_OSPI0_D7 */ + J721S2_WKUP_IOPAD(0x008, PIN_INPUT, 0) /* (E18) MCU_OSPI0_DQS */ + >; + bootph-all; + }; +}; + +&wkup_pmx1 { + pmic_irq_pins_default: pmic-irq-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x028, PIN_INPUT, 7) /* (C21) MCU_OSPI1_CSn1.WKUP_GPIO0_39 */ + >; + }; +}; + +&wkup_pmx2 { + wkup_i2c0_pins_default: wkup-i2c0-default-pins { + pinctrl-single,pins = < + J721S2_WKUP_IOPAD(0x098, PIN_INPUT_PULLUP, 0) /* (H24) WKUP_I2C0_SCL */ + J721S2_WKUP_IOPAD(0x09c, PIN_INPUT_PULLUP, 0) /* (H27) WKUP_I2C0_SDA */ + >; + bootph-all; + }; +}; + +&c71_0 { + mboxes = <&mailbox0_cluster4 &mbox_c71_0>; + memory-region = <&c71_0_dma_memory_region>, + <&c71_0_memory_region>; + status = "okay"; +}; + +&c71_1 { + mboxes = <&mailbox0_cluster4 &mbox_c71_1>; + memory-region = <&c71_1_dma_memory_region>, + <&c71_1_memory_region>; + status = "okay"; +}; + +&mailbox0_cluster0 { + interrupts = <436>; + status = "okay"; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster1 { + interrupts = <432>; + status = "okay"; + + mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster2 { + interrupts = <428>; + status = "okay"; + + mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&mailbox0_cluster4 { + interrupts = <420>; + status = "okay"; + + mbox_c71_0: mbox-c71-0 { + ti,mbox-rx = <0 0 0>; + ti,mbox-tx = <1 0 0>; + }; + + mbox_c71_1: mbox-c71-1 { + ti,mbox-rx = <2 0 0>; + ti,mbox-tx = <3 0 0>; + }; +}; + +&main_cpsw { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii1_pins_default>; + status = "okay"; +}; + +&main_cpsw_mdio { + pinctrl-names = "default"; + pinctrl-0 = <&main_cpsw_mdio_pins_default>; + status = "okay"; + + phy1: ethernet-phy@0 { + reg = <0>; + ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>; + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; + ti,min-output-impedance; + ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>; + }; +}; + +&main_cpsw_port1 { + phy-handle = <&phy1>; + phy-mode = "rgmii-rxid"; + status = "okay"; +}; + +&main_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&main_i2c0_pins_default>; + + temperature-sensor@48 { + compatible = "ti,tmp102"; + reg = <0x48>; + }; + + temperature-sensor@49 { + compatible = "ti,tmp102"; + reg = <0x49>; + }; + + i2c_som_rtc: rtc@52 { + compatible = "microcrystal,rv3028"; + reg = <0x52>; + }; +}; + +&main_gpio0 { + status = "okay"; +}; + +&main_r5fss0_core0 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>; + memory-region = <&main_r5fss0_core0_dma_memory_region>, + <&main_r5fss0_core0_memory_region>; +}; + +&main_r5fss0_core1 { + mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>; + memory-region = <&main_r5fss0_core1_dma_memory_region>, + <&main_r5fss0_core1_memory_region>; +}; + +&main_r5fss1_core0 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>; + memory-region = <&main_r5fss1_core0_dma_memory_region>, + <&main_r5fss1_core0_memory_region>; +}; + +&main_r5fss1_core1 { + mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>; + memory-region = <&main_r5fss1_core1_dma_memory_region>, + <&main_r5fss1_core1_memory_region>; +}; + +/* eMMC */ +&main_sdhci0 { + disable-wp; + non-removable; + ti,driver-strength-ohm = <50>; + bootph-all; + status = "okay"; +}; + +/* SD card */ +&main_sdhci1 { + vqmmc-supply = <&vdd_sd_dv>; + bootph-all; +}; + +&main_r5fss0 { + ti,cluster-mode = <0>; +}; + +&main_r5fss1 { + ti,cluster-mode = <0>; +}; + +/* Timers are used by Remoteproc firmware */ +&main_timer0 { + status = "reserved"; +}; + +&main_timer1 { + status = "reserved"; +}; + +&main_timer2 { + status = "reserved"; +}; + +&main_timer3 { + status = "reserved"; +}; + +&main_timer4 { + status = "reserved"; +}; + +&main_timer5 { + status = "reserved"; +}; + +&mcu_r5fss0_core0 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>; + memory-region = <&mcu_r5fss0_core0_dma_memory_region>, + <&mcu_r5fss0_core0_memory_region>; +}; + +&mcu_r5fss0_core1 { + mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>; + memory-region = <&mcu_r5fss0_core1_dma_memory_region>, + <&mcu_r5fss0_core1_memory_region>; +}; + +&ospi0 { + pinctrl-names = "default"; + pinctrl-0 = <&mcu_fss0_ospi0_pins_default>; + status = "okay"; + + serial_flash: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0x0>; + spi-tx-bus-width = <8>; + spi-rx-bus-width = <8>; + spi-max-frequency = <25000000>; + cdns,tshsl-ns = <60>; + cdns,tsd2d-ns = <60>; + cdns,tchsh-ns = <60>; + cdns,tslch-ns = <60>; + cdns,read-delay = <2>; + bootph-all; + }; +}; + +&wkup_gpio0 { + status = "okay"; +}; + +&wkup_i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&wkup_i2c0_pins_default>; + clock-frequency = <400000>; + status = "okay"; + + vdd_cpu_avs: regulator@40 { + compatible = "ti,tps62873"; + reg = <0x40>; + regulator-name = "VDD_CPU_AVS"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + bootph-pre-ram; + }; + + pmic@48 { + compatible = "ti,tps6594-q1"; + reg = <0x48>; + system-power-controller; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&wkup_gpio0>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + buck12-supply = <&vcc_3v3>; + buck3-supply = <&vcc_3v3>; + buck4-supply = <&vcc_3v3>; + buck5-supply = <&vcc_3v3>; + ldo1-supply = <&vcc_3v3>; + ldo2-supply = <&vcc_3v3>; + ldo3-supply = <&vcc_3v3>; + ldo4-supply = <&vcc_3v3>; + ti,primary-pmic; + + regulators { + bucka12: buck12 { + regulator-name = "VDD_DDR_1V1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka3: buck3 { + regulator-name = "VDD_RAM_0V85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka4: buck4 { + regulator-name = "VDD_IO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + bucka5: buck5 { + regulator-name = "VDD_MCU_0V85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa1: ldo1 { + regulator-name = "VDD_MCUIO_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa2: ldo2 { + regulator-name = "VDD_MCUIO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa3: ldo3 { + regulator-name = "VDDA_DLL_0V8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldoa4: ldo4 { + regulator-name = "VDDA_MCU_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + eeprom@50 { + compatible = "atmel,24c32"; + reg = <0x50>; + pagesize = <32>; + bootph-all; + }; + + som_eeprom_opt: eeprom@51 { + compatible = "atmel,24c32"; + reg = <0x51>; + pagesize = <32>; + }; +};
PATCH v3 3/3 arm64: defconfig: Enable TMP102 as module
In reply to Dominik HallerEnable the driver for the TI TMP102 temperature sensors used on the Phytec phyCORE-AM68x/TDA4x and the phyGATE-Tauri-L-iMX8MM.
---
Notes:
Changes in v3:
- no changes
Changes in v2:
- new patch in series
arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -702,6 +702,7 @@ CONFIG_SENSORS_RASPBERRYPI_HWMON=m CONFIG_SENSORS_SL28CPLD=m CONFIG_SENSORS_INA2XX=m CONFIG_SENSORS_INA3221=m +CONFIG_SENSORS_TMP102=m CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y CONFIG_CPU_THERMAL=y CONFIG_DEVFREQ_THERMAL=y
Signature · 1 line
2.43.0
Quoted 5 lines · Dominik Haller
Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM and the phyBOARD-Izar carrier board.
Signed-off-by Dominik Haller <[email protected]>---
Best regards,
Krzysztof
Am 17.04.25 um 15:59 schrieb Dominik Haller:
Quoted 4 lines
Add devicetree bindings for the AM68x based phyCORE-AM68x/TDA4x SoM and the phyBOARD-Izar carrier board.
Signed-off-by Dominik Haller <[email protected]>
Quoted 30 lines
---
Notes:
Changes in v3:
- reorganized compatibles into their own entryChanges in v2:
- no changesDocumentation/devicetree/bindings/arm/ti/k3.yaml | 7 +++++++ 1 file changed, 7 insertions(+)Documentation/devicetree/bindings/arm/ti/k3.yaml +7
-0@@ -139,6 +139,13 @@ properties: - ti,j721s2-evm - const: ti,j721s2 + - description: K3 J721s2 SoC Phytec SoM based boards + items: + - enum: + - phytec,am68-phyboard-izar + - const: phytec,am68-phycore-som + - const: ti,j721s2 + - description: K3 J722S SoC and Boards items: - enum: