GCOV: Add config to check the preqequisites situation
Subsystems (2)
PATCH v8 1/1 GCOV: Add config to check the preqequisites situation
From: Cixi Geng <[email protected]>
Introduce new configuration option GCOV_PROFILE_PREREQS that can be used to check whether the prerequisites for enabling gcov profiling for specific files and directories are met.
Only add SERIAL_GCOV for an example.
--- drivers/tty/serial/Kconfig | 7 +++++++ drivers/tty/serial/Makefile | 1 + kernel/gcov/Kconfig | 9 +++++++++ 3 files changed, 17 insertions(+)
drivers/tty/serial/Kconfig +7 -0
@@ -1586,3 +1586,10 @@ endmenu config SERIAL_MCTRL_GPIO tristate + +config SERIAL_GCOV + bool "Enable profile gcov for serial directory" + depends on GCOV_PROFILE_PREREQS + help + The SERIAL_GCOV will add Gcov profiling flags when kernel compiles. + Say 'Y' here if you want the gcov data for the serial directory,
drivers/tty/serial/Makefile +1 -0
@@ -3,6 +3,7 @@ # Makefile for the kernel serial device drivers. # +GCOV_PROFILE := $(CONFIG_SERIAL_GCOV) obj-$(CONFIG_SERIAL_CORE) += serial_core.o obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
kernel/gcov/Kconfig +9 -0
@@ -51,4 +51,13 @@ config GCOV_PROFILE_ALL larger and run slower. Also be sure to exclude files from profiling which are not linked to the kernel image to prevent linker errors. +config GCOV_PROFILE_PREREQS + bool "Profile Kernel for prereqs" + def_bool y if GCOV_KERNEL && !COMPILE_TEST + help + This options activates profiling for the specified kernel modules. + When some modules need Gcov data, enable this config, then configure + with gcov on the corresponding modules,The directories or files of + these modules will be added profiling flags after kernel compile. + endmenu
Signature · 1 line
2.25.1
Peter Oberparleiter
maintainerQuoted 7 lines · On 28.10.2020 14:15, [email protected] wrote:
From: Cixi Geng <[email protected]>
Introduce new configuration option
GCOV_PROFILE_PREREQSthat can be used to check whether the prerequisites for enabling gcov profiling for specific files and directories are met.Only add
SERIAL_GCOVfor an example.
[...]
kernel/gcov/Kconfig config GCOV_PROFILE_ALL · line 63
Quoted 10 lines
kernel/gcov/Kconfig +9
-0+config GCOV_PROFILE_PREREQS + bool "Profile Kernel for prereqs" + def_bool y if GCOV_KERNEL && !COMPILE_TEST + help + This options activates profiling for the specified kernel modules. + When some modules need Gcov data, enable this config, then configure + with gcov on the corresponding modules,The directories or files of + these modules will be added profiling flags after kernel compile. + endmenu
This version still produces a prompt during make oldconfig. You need to remove the "bool" line and the "help" lines.
Before sending another version please test it to make sure that it does not produce a prompt.
Signature · 2 lines
Peter Oberparleiter Linux on Z Development - IBM Germany