PWM and keyboard backlight driver for ARM Macs
Subsystems (3)
cover PWM and keyboard backlight driver for ARM Macs
Hi,
This series adds support for the PWM controller present on ARM Macs and used among other things for the keyboard backlight on those laptops.
The included device tree patch also hooks up the keyboard backlight using the pwm-leds binding.
Best Regards.
Sasha Finkelstein (4):
dt-bindings: pwm: Add Apple PWM controller
pwm: Add Apple PWM controller
arm64: dts: apple: t8103: Add PWM controller
MAINTAINERS: Add entries for Apple PWM driver
Documentation/devicetree/bindings/pwm/pwm-apple.yaml | 51 +++++++++++++ MAINTAINERS | 2 ++ arch/arm64/boot/dts/apple/t8103-j293.dts | 20 ++++++++ arch/arm64/boot/dts/apple/t8103-j313.dts | 20 ++++++++ arch/arm64/boot/dts/apple/t8103.dtsi | 9 ++++ drivers/pwm/Kconfig | 12 ++++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-apple.c | 124 +++++++++++++++++++ 8 files changed, 239 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-apple.yaml create mode 100644 drivers/pwm/pwm-apple.c
PATCH 1/4 dt-bindings: pwm: Add Apple PWM controller
Apple SoCs such as the M1 contain a PWM controller used among other things to control the keyboard backlight.
--- .../devicetree/bindings/pwm/pwm-apple.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-apple.yaml
Documentation/devicetree/bindings/pwm/pwm-apple.yaml new file +51 -0
@@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-apple.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple FPWM controller + +maintainers: + - [email protected] + - Sasha Finkelstein <[email protected]> + +description: |+ + PWM controller used for keyboard backlight on ARM Macs + +properties: + compatible: + items: + - enum: + - apple,t8103-fpwm + - apple,t6000-fpwm + - apple,t8112-fpwm + - const: apple,s5l-fpwm + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#pwm-cells": + const: 2 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm: fpwm@235044000 { + compatible = "apple,s5l-fpwm"; + reg = <0x2 0x35044000 0x0 0x4000>; + power-domains = <&ps_fpwm1>; + clocks = <&clkref>; + #pwm-cells = <2>; + };
Signature · 1 line
2.37.3
Re: [PATCH 1/4] dt-bindings: pwm: Add Apple PWM controller
Documentation/devicetree/bindings/pwm/pwm-apple.yaml
Quoted 14 lines · Sasha Finkelstein
Apple SoCs such as the M1 contain a PWM controller used among other things to control the keyboard backlight.
Signed-off-by Sasha Finkelstein <[email protected]>--- .../devicetree/bindings/pwm/pwm-apple.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-apple.yamlDocumentation/devicetree/bindings/pwm/pwm-apple.yaml new file +0
-0
Filename matching compatible, so apple,s5l-fpwm.yaml
Quoted 4 lines
Documentation/devicetree/bindings/pwm/pwm-apple.yaml new file +3
-0@@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +---
Documentation/devicetree/bindings/pwm/pwm-apple.yaml line 13
Quoted 10 lines
Documentation/devicetree/bindings/pwm/pwm-apple.yaml new file +10
-0+$id: http://devicetree.org/schemas/pwm/pwm-apple.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple FPWM controller + +maintainers: + - [email protected] + - Sasha Finkelstein <[email protected]> + +description: |+
Drop |+
Documentation/devicetree/bindings/pwm/pwm-apple.yaml line 23
Quoted 10 lines
Documentation/devicetree/bindings/pwm/pwm-apple.yaml new file +10
-0+ PWM controller used for keyboard backlight on ARM Macs + +properties: + compatible: + items: + - enum: + - apple,t8103-fpwm + - apple,t6000-fpwm + - apple,t8112-fpwm + - const: apple,s5l-fpwm
Is it then derived from Samsung platform? If yes, it is candidate for merging.
Quoted 12 lines
Documentation/devicetree/bindings/pwm/pwm-apple.yaml new file +12
-0+ reg: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#pwm-cells": + const: 2 +
Documentation/devicetree/bindings/pwm/pwm-apple.yaml line 45
Quoted 10 lines
Documentation/devicetree/bindings/pwm/pwm-apple.yaml new file +10
-0+required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm: fpwm@235044000 {
Generic node name, so just "pwm". Drop also label - it's not used in the example.
Best regards,
Krzysztof
Re: [PATCH 1/4] dt-bindings: pwm: Add Apple PWM controller
Quoted 15 lines · Krzysztof Kozlowski
Documentation/devicetree/bindings/pwm/pwm-apple.yaml line 23
Quoted 10 lines · Sasha Finkelstein
Documentation/devicetree/bindings/pwm/pwm-apple.yaml new file +10
-0+ PWM controller used for keyboard backlight on ARM Macs + +properties: + compatible: + items: + - enum: + - apple,t8103-fpwm + - apple,t6000-fpwm + - apple,t8112-fpwm + - const: apple,s5l-fpwmIs it then derived from Samsung platform? If yes, it is candidate for merging.
Apple calls it the 'AppleS5L8920XFPWM' which suggests some samsung lineage, but the register interface is different from the one in pwm-samsung driver.
Rob Herring
maintainerRe: [PATCH 1/4] dt-bindings: pwm: Add Apple PWM controller
In reply to Sasha FinkelsteinQuoted 9 lines · Sasha Finkelstein
Apple SoCs such as the M1 contain a PWM controller used among other things to control the keyboard backlight.
Signed-off-by Sasha Finkelstein <[email protected]>--- .../devicetree/bindings/pwm/pwm-apple.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-apple.yaml
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pwm/pwm-apple.example.dtb: fpwm@235044000: compatible:0: 'apple,s5l-fpwm' is not one of ['apple,t8103-fpwm', 'apple,t6000-fpwm', 'apple,t8112-fpwm']
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pwm/pwm-apple.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pwm/pwm-apple.example.dtb: fpwm@235044000: compatible: ['apple,s5l-fpwm'] is too short
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pwm/pwm-apple.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pwm/pwm-apple.example.dtb: fpwm@235044000: reg: [[2, 889470976], [0, 16384]] is too long
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pwm/pwm-apple.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/
This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date:
pip3 install dtschema --upgrade
Please check and re-submit.
Re: [PATCH 1/4] dt-bindings: pwm: Add Apple PWM controller
In reply to Sasha FinkelsteinQuoted 28 lines · Sasha Finkelstein
Apple SoCs such as the M1 contain a PWM controller used among other things to control the keyboard backlight.
Signed-off-by Sasha Finkelstein <[email protected]>--- .../devicetree/bindings/pwm/pwm-apple.yaml | 51 +++++++++++++++++++ 1 file changed, 51 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-apple.yamlDocumentation/devicetree/bindings/pwm/pwm-apple.yaml new file +13
-0@@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-apple.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple FPWM controller + +maintainers: + - [email protected] + - Sasha Finkelstein <[email protected]> + +description: |+
Documentation/devicetree/bindings/pwm/pwm-apple.yaml line 23
Quoted 10 lines
Documentation/devicetree/bindings/pwm/pwm-apple.yaml new file +10
-0+ PWM controller used for keyboard backlight on ARM Macs + +properties: + compatible: + items: + - enum: + - apple,t8103-fpwm + - apple,t6000-fpwm + - apple,t8112-fpwm + - const: apple,s5l-fpwm
Missing blank line.
Quoted 13 lines
Documentation/devicetree/bindings/pwm/pwm-apple.yaml new file +13
-0+ reg: + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#pwm-cells": + const: 2 + +required:
Documentation/devicetree/bindings/pwm/pwm-apple.yaml line 46
Quoted 10 lines
Documentation/devicetree/bindings/pwm/pwm-apple.yaml new file +10
-0+ - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + pwm: fpwm@235044000 { + compatible = "apple,s5l-fpwm";
As Rob's bot pointed out, this does not match the bindings so you did not test them before sending :(
Best regards,
Krzysztof
PATCH 2/4 pwm: Add Apple PWM controller
In reply to Sasha FinkelsteinAdds the Apple PWM controller driver.
--- drivers/pwm/Kconfig | 12 ++++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-apple.c | 124 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 137 insertions(+) create mode 100644 drivers/pwm/pwm-apple.c
drivers/pwm/Kconfig +12 -0
@@ -51,6 +51,18 @@ config PWM_AB8500 To compile this driver as a module, choose M here: the module will be called pwm-ab8500. +config PWM_APPLE + tristate "Apple SoC PWM support" + depends on ARCH_APPLE || (COMPILE_TEST && 64BIT) + help + Generic PWM framework driver for PWM controller present on + Apple SoCs + + Say Y here if you have an ARM Apple laptop, otherwise say N + + To compile this driver as a module, choose M here: the module + will be called pwm-apple. + config PWM_ATMEL tristate "Atmel PWM support" depends on ARCH_AT91 || COMPILE_TEST
drivers/pwm/Makefile +1 -0
@@ -2,6 +2,7 @@ obj-$(CONFIG_PWM) += core.o obj-$(CONFIG_PWM_SYSFS) += sysfs.o obj-$(CONFIG_PWM_AB8500) += pwm-ab8500.o +obj-$(CONFIG_PWM_APPLE) += pwm-apple.o obj-$(CONFIG_PWM_ATMEL) += pwm-atmel.o obj-$(CONFIG_PWM_ATMEL_HLCDC_PWM) += pwm-atmel-hlcdc.o obj-$(CONFIG_PWM_ATMEL_TCB) += pwm-atmel-tcb.o
drivers/pwm/pwm-apple.c new file +124 -0
124 lines not on this page · raw message
Signature · 1 line
2.37.3
Re: [PATCH 2/4] pwm: Add Apple PWM controller
Quoted 15 lines · Sasha Finkelstein
Adds the Apple PWM controller driver.
Signed-off-by Sasha Finkelstein <[email protected]>--- drivers/pwm/Kconfig | 12 ++++ drivers/pwm/Makefile | 1 + drivers/pwm/pwm-apple.c | 124 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 137 insertions(+) create mode 100644 drivers/pwm/pwm-apple.cdrivers/pwm/Kconfig +0
-0
drivers/pwm/Kconfig config PWM_AB8500 · line 56
Quoted 6 lines
drivers/pwm/Kconfig +3
-0@@ -51,6 +51,18 @@ config PWM_AB8500 To compile this driver as a module, choose M here: the module will be called pwm-ab8500. +config PWM_APPLE + tristate "Apple SoC PWM support" + depends on ARCH_APPLE || (COMPILE_TEST && 64BIT)
Why this code cannot be build on 32-bit?
drivers/pwm/Kconfig config PWM_AB8500 · line 60
Quoted 4 lines
drivers/pwm/Kconfig +4
-0+ help + Generic PWM framework driver for PWM controller present on + Apple SoCs +
Best regards,
Krzysztof
Re: [PATCH 2/4] pwm: Add Apple PWM controller
Quoted 7 lines · Krzysztof Kozlowski
drivers/pwm/Kconfig config PWM_AB8500 · line 56
Quoted 3 lines · Sasha Finkelstein
drivers/pwm/Kconfig +3
-0+config PWM_APPLE + tristate "Apple SoC PWM support" + depends on ARCH_APPLE || (COMPILE_TEST && 64BIT)Why this code cannot be build on 32-bit?
It uses 64-bit divisions, which causes it to fail to build on 32-bit mips. It should not be a
problem, since this hardware is only present on 64-bit SoCs.
Re: [PATCH 2/4] pwm: Add Apple PWM controller
Quoted 4 lines · Sasha Finkelstein
Quoted 2 lines · Krzysztof Kozlowski
On 28/10/2022 12:52, Sasha Finkelstein wrote:
Quoted 8 lines
Quoted 5 lines
drivers/pwm/Kconfig config PWM_AB8500 · line 56
Quoted 3 lines
drivers/pwm/Kconfig +3
-0+config PWM_APPLE + tristate "Apple SoC PWM support" + depends on ARCH_APPLE || (COMPILE_TEST && 64BIT)Why this code cannot be build on 32-bit?
It uses 64-bit divisions, which causes it to fail to build on 32-bit mips. It should not be a
problem, since this hardware is only present on 64-bit SoCs.
Does not matter, code should be portable and buildable on 32-bit. If it does not build then your code is not correct.
You need to investigate the failure. Maybe using do_div would solve (or other macros from div64.h)
Best regards,
Krzysztof
Re: [PATCH 2/4] pwm: Add Apple PWM controller
Quoted 9 lines · Krzysztof Kozlowski
Quoted 8 lines · Sasha Finkelstein
Quoted 6 lines · Krzysztof Kozlowski
Quoted 3 lines · Sasha Finkelstein
drivers/pwm/Kconfig +3
-0+config PWM_APPLE + tristate "Apple SoC PWM support" + depends on ARCH_APPLE || (COMPILE_TEST && 64BIT)
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Why this code cannot be build on 32-bit?
It uses 64-bit divisions, which causes it to fail to build on 32-bit mips. It should not be a
problem, since this hardware is only present on 64-bit SoCs.Does not matter, code should be portable and buildable on 32-bit. If it does not build then your code is not correct.
This statement does not apply in general. There are plenty of drivers which cannot reasonably build for 32-bit, and make no sense because no 32-bit hardware exists that could use them. Examples include anything that accesses 64-bit registers on 64-bit SoCs the normal way, and further anything that touches CPU stuff like system registers.
In *this* case, if the only issue is some 64-bit math, then yes, it should be made to build on 32-bit (especially since this is likely to also work for older 32-bit Apple SoCs). But the (COMPILE_TEST && 64BIT) pattern is definitely valid in other cases, and I've been adding it lately to shut up the kernel test bot since it makes no sense to compile test a whole pile of our drivers on 32-bit architectures - they fundamentally can't compile without adding pointless hypothetical broken fluff to the driver like split MMIO accesses (which often can't work on real hardware), and it serves no purpose.
- Hector
PATCH 3/4 arm64: dts: apple: t8103: Add PWM controller
In reply to Sasha FinkelsteinAdds PWM controller and keyboard backlight bindings for M1 MacBooks
--- arch/arm64/boot/dts/apple/t8103-j293.dts | 20 ++++++++++++++++++++ arch/arm64/boot/dts/apple/t8103-j313.dts | 20 ++++++++++++++++++++ arch/arm64/boot/dts/apple/t8103.dtsi | 9 +++++++++ 3 files changed, 49 insertions(+)
arch/arm64/boot/dts/apple/t8103-j293.dts +20 -0
@@ -11,6 +11,7 @@ #include "t8103.dtsi" #include "t8103-jxxx.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "apple,j293", "apple,t8103", "apple,arm-platform";
@@ -43,3 +44,22 @@ &i2c2 { &i2c4 { status = "okay"; }; + +/ { + pwmleds { + compatible = "pwm-leds"; + kbd-backlight { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + pwm-names = "kbd-backlight"; + }; + }; +}; + +&fpwm1 { + status = "okay"; +};
arch/arm64/boot/dts/apple/t8103-j313.dts +20 -0
@@ -11,6 +11,7 @@ #include "t8103.dtsi" #include "t8103-jxxx.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "apple,j313", "apple,t8103", "apple,arm-platform";
@@ -35,3 +36,22 @@ &pcie0_dart_2 { /delete-node/ &port01; /delete-node/ &port02; + +/ { + pwmleds { + compatible = "pwm-leds"; + kbd-backlight { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + pwm-names = "kbd-backlight"; + }; + }; +}; + +&fpwm1 { + status = "okay"; +};
arch/arm64/boot/dts/apple/t8103.dtsi +9 -0
@@ -191,6 +191,15 @@ i2c4: i2c@235020000 { status = "disabled"; /* only used in J293 */ }; + fpwm1: fpwm@235044000 { + compatible = "apple,t8103-fpwm", "apple,s5l-fpwm"; + reg = <0x2 0x35044000 0x0 0x4000>; + power-domains = <&ps_fpwm1>; + clocks = <&clkref>; + #pwm-cells = <2>; + status = "disabled"; + }; + serial0: serial@235200000 { compatible = "apple,s5l-uart"; reg = <0x2 0x35200000 0x0 0x1000>;
Signature · 1 line
2.37.3
Re: [PATCH 3/4] arm64: dts: apple: t8103: Add PWM controller
Quoted 22 lines · Sasha Finkelstein
Adds PWM controller and keyboard backlight bindings for M1 MacBooks
Signed-off-by Sasha Finkelstein <[email protected]>--- arch/arm64/boot/dts/apple/t8103-j293.dts | 20 ++++++++++++++++++++ arch/arm64/boot/dts/apple/t8103-j313.dts | 20 ++++++++++++++++++++ arch/arm64/boot/dts/apple/t8103.dtsi | 9 +++++++++ 3 files changed, 49 insertions(+)arch/arm64/boot/dts/apple/t8103-j293.dts +1
-0@@ -11,6 +11,7 @@ #include "t8103.dtsi" #include "t8103-jxxx.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "apple,j293", "apple,t8103", "apple,arm-platform";
arch/arm64/boot/dts/apple/t8103-j293.dts &i2c2 { · line 49
Quoted 6 lines
arch/arm64/boot/dts/apple/t8103-j293.dts +3
-0@@ -43,3 +44,22 @@ &i2c2 { &i2c4 { status = "okay"; }; + +/ { + pwmleds {
Node names should be generic: led-controller
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
arch/arm64/boot/dts/apple/t8103-j293.dts &i2c2 { · line 51
Quoted 2 lines
arch/arm64/boot/dts/apple/t8103-j293.dts +2
-0+ compatible = "pwm-leds"; + kbd-backlight {
Does not look like you tested the DTS against bindings. Please run make dtbs_check (see Documentation/devicetree/bindings/writing-schema.rst for instructions).
arch/arm64/boot/dts/apple/t8103-j293.dts &i2c2 { · line 58
Quoted 7 lines
arch/arm64/boot/dts/apple/t8103-j293.dts +7
-0+ pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + pwm-names = "kbd-backlight";
This goes just after pwms.
Quoted 20 lines
arch/arm64/boot/dts/apple/t8103-j293.dts +7
-0+ }; + }; +}; + +&fpwm1 { + status = "okay"; +};arch/arm64/boot/dts/apple/t8103-j313.dts +1
-0@@ -11,6 +11,7 @@ #include "t8103.dtsi" #include "t8103-jxxx.dtsi" +#include <dt-bindings/leds/common.h> / { compatible = "apple,j313", "apple,t8103", "apple,arm-platform";
arch/arm64/boot/dts/apple/t8103-j313.dts &pcie0_dart_2 { · line 41
Quoted 6 lines
arch/arm64/boot/dts/apple/t8103-j313.dts +3
-0@@ -35,3 +36,22 @@ &pcie0_dart_2 { /delete-node/ &port01; /delete-node/ &port02; + +/ { + pwmleds {
Same comments
Quoted 21 lines
arch/arm64/boot/dts/apple/t8103-j313.dts +16
-0+ compatible = "pwm-leds"; + kbd-backlight { + pwms = <&fpwm1 0 40000>; + label = "kbd_backlight"; + function = LED_FUNCTION_KBD_BACKLIGHT; + color = <LED_COLOR_ID_WHITE>; + max-brightness = <255>; + default-state = "keep"; + pwm-names = "kbd-backlight"; + }; + }; +}; + +&fpwm1 { + status = "okay"; +};arch/arm64/boot/dts/apple/t8103.dtsi +0
-0
arch/arm64/boot/dts/apple/t8103.dtsi i2c4: i2c@235020000 { · line 194
Quoted 4 lines
arch/arm64/boot/dts/apple/t8103.dtsi +1
-0@@ -191,6 +191,15 @@ i2c4: i2c@235020000 { status = "disabled"; /* only used in J293 */ }; + fpwm1: fpwm@235044000 {
Node names should be generic, so pwm.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
arch/arm64/boot/dts/apple/t8103.dtsi i2c4: i2c@235020000 { · line 196
Quoted 2 lines
arch/arm64/boot/dts/apple/t8103.dtsi +2
-0+ compatible = "apple,t8103-fpwm", "apple,s5l-fpwm"; + reg = <0x2 0x35044000 0x0 0x4000>;
Best regards,
Krzysztof
PATCH 4/4 MAINTAINERS: Add entries for Apple PWM driver
In reply to Sasha FinkelsteinAdd the MAINTAINERS entries for the driver
--- MAINTAINERS | 2 ++ 1 file changed, 2 insertions(+)
MAINTAINERS +2 -0
@@ -1908,6 +1908,7 @@ F: Documentation/devicetree/bindings/nvmem/apple,efuses.yaml F: Documentation/devicetree/bindings/pci/apple,pcie.yaml F: Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml F: Documentation/devicetree/bindings/power/apple* +F: Documentation/devicetree/bindings/pwm/pwm-apple.yaml F: Documentation/devicetree/bindings/watchdog/apple,wdt.yaml F: arch/arm64/boot/dts/apple/ F: drivers/clk/clk-apple-nco.c
@@ -1921,6 +1922,7 @@ F: drivers/mailbox/apple-mailbox.c F: drivers/nvme/host/apple.c F: drivers/nvmem/apple-efuses.c F: drivers/pinctrl/pinctrl-apple-gpio.c +F: drivers/pwm/pwm-apple.c F: drivers/soc/apple/* F: drivers/watchdog/apple_wdt.c F: include/dt-bindings/interrupt-controller/apple-aic.h
Signature · 1 line
2.37.3