vxpocket 440 with alsa, problems with vxloader
Im having trouble getting a Digigram VXPocket PCMCIA with alsa.
copied vxp440.conf to /etc/pcmcia/ - makes the card recognised by cardmgr when inserted.
The drivers - snd_vxp440 and friend, seem to load and run. Either by entering them in /etc/modprobe.conf or having them loaded by cardmgr.
$/sbin/lsmod | grep vx
snd_vxp440 4800 0 snd_vx_cs 14848 1 snd_vxp440 snd_vx_lib 45696 1 snd_vx_cs snd_hwdep 10784 1 snd_vx_lib snd_pcm 120968 4 snd_pcm_oss,snd_vx_lib,snd_intel8x0,snd_ac97_codec snd 72836 11 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_vx_cs,snd_vx_lib,snd_hwdep,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer pcmcia 22148 6 snd_vxp440,snd_vx_cs pcmcia_core 59840 3 snd_vx_cs,pcmcia,yenta_socket
However, running vxloader only leaves me with an error:
$ vxloader vxloader: no VX-compatible cards found $
running alsaconf doesnt find any vxpocket card.
alsa is version 1.0.7
has anybody a hint to get this further?
-anders
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
At Fri, 14 Jan 2005 12:42:20 +0100,
Quoted 22 lines · [email protected] wrote:
Im having trouble getting a Digigram VXPocket PCMCIA with alsa.
copied vxp440.conf to
/etc/pcmcia/- makes the card recognised by cardmgr when inserted.The drivers -
snd_vxp440and friend, seem to load and run. Either by entering them in/etc/modprobe.confor having them loaded by cardmgr.$/sbin/lsmod | grep vx
snd_vxp440 4800 0 snd_vx_cs 14848 1 snd_vxp440 snd_vx_lib 45696 1 snd_vx_cs snd_hwdep 10784 1 snd_vx_lib snd_pcm 120968 4 snd_pcm_oss,snd_vx_lib,snd_intel8x0,snd_ac97_codec snd 72836 11 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_vx_cs,snd_vx_lib,snd_hwdep,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer pcmcia 22148 6 snd_vxp440,snd_vx_cs pcmcia_core 59840 3 snd_vx_cs,pcmcia,yenta_socketHowever, running vxloader only leaves me with an error:
Quoted 7 lines
$ vxloader vxloader: no VX-compatible cards found $running alsaconf doesnt find any vxpocket card.
alsa is version 1.0.7
vxpocket/vxp440 driver in ALSA 1.0.7 has a severe bug. Try ALSA 1.0.8 instead.
On ALSA 1.0.8, the firmware is loaded via hotplug automatically, so you don't need vxloader. (It's only for 2.6 kernels.) Don't forget to update alsa-firmware, too.
Takashi
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Thanks alot for response. It got me further, but still no sound out. Anybody got a clue where this gets wrong?
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
"TI" == Takashi Iwai <[email protected]> writes:
alsa is version 1.0.7
TI> vxpocket/vxp440 driver in ALSA 1.0.7 has a severe bug. TI> Try ALSA 1.0.8 instead.
TI>
TI> On ALSA 1.0.8, the firmware is loaded via hotplug automatically, so TI> you don't need vxloader. (It's only for 2.6 kernels.) TI> Don't forget to update alsa-firmware, too.
With alsa-1.0.8, and upgraded firmware it behaves as follows. Pcmcia card is card-1, builtin sound is card-0:
$ alsamixer -c1 alsamixer: function snd_ctl_open failed for hw:1: No such device
Plugging in the card gives output:
$ alsamixer -c1 No mixer elems found
And trying to play through the pcmcia-card does not work:
$ aplay -D hw:0,0 test.wav Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo $ aplay -D hw:1,0 test.wav ALSA lib pcm_hw.c:1174:(snd_pcm_hw_open) open /dev/snd/pcmC1D0p failed: No such device aplay: main:508: audio open error: No such device
Seems the card is detected
$ cat /proc/asound/cards 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with STAC9750/51 at 0xf4fff800, irq 17 1 [VXPocket440 ]: VXPocket440 - Digigram VXPocket440 Digigram VXPocket440 at 0x100, irq 3
But all "parameters" are set to zero or something.
$ cat /proc/asound/card1/vx-status Digigram VXPocket440 at 0x100, irq 3 DSP audio info: Input Source: Line Clock Mode: Auto Clock Source: Internal Frequency: 0 Detected Frequency: 0 Detected UER type: Consumer Min/Max/Cur IBL: 0/0/0 (granularity=0)
$ cat /proc/asound/devices
0: [0- 0]: ctl
20: [0- 4]: digital audio playback
27: [0- 3]: digital audio capture
26: [0- 2]: digital audio capture
25: [0- 1]: digital audio capture
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
1: : sequencer
33: : timer
32: [1- 0]: ctl
36: [1- 0]: hardware dependent$ uname -a Linux localhost 2.6.10-2.1.ll.rhfc2.ccrma #1 Thu Dec 30 06:24:24 EST 2004 i686 i686 i386 GNU/Linux $
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
At Fri, 14 Jan 2005 15:15:17 +0100,
Quoted 15 lines · Anders Vinjar
Thanks alot for response. It got me further, but still no sound out. Anybody got a clue where this gets wrong?
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
"TI" == Takashi Iwai <[email protected]> writes:
alsa is version 1.0.7
TI> vxpocket/vxp440 driver in ALSA 1.0.7 has a severe bug. TI> Try ALSA 1.0.8 instead.
TI>
TI> On ALSA 1.0.8, the firmware is loaded via hotplug automatically, so TI> you don't need vxloader. (It's only for 2.6 kernels.) TI> Don't forget to update alsa-firmware, too.
Quoted 2 lines
With alsa-1.0.8, and upgraded firmware it behaves as follows. Pcmcia card is card-1, builtin sound is card-0:
Does your kernel support hotplug firmware loader (CONFIG_FW_LOADER)? And is hotplug working?
Check whether /proc/asound/devices whether you have a "[1-0] hardware dependent device". If you have it, the hotplug firmware loader isn't enabled. Use vxloader, run "vxloader -c1".
With the attached patch, you can check whether the firmware is loaded or not via the proc file.
Takashi
Index: alsa-kernel/drivers/vx/vx_core.c
===================================================================
RCS file: /suse/tiwai/cvs/alsa/alsa-kernel/drivers/vx/vx_core.c,v retrieving revision 1.12
drivers/vx/vx_core.c +4 -0
@@ -610,6 +610,10 @@static char *uer_type[] = {"Consumer" ,"Professional" ,"Not Present" };snd_iprintf (buffer,"%s\n" , chip->card->longname); +snd_iprintf (buffer,"Xilinx Firmware: %s\n" , + chip->chip_status &VX_STAT_XILINX_LOADED ?"Loaded" :"No" ); +snd_iprintf (buffer,"Device Initialized: %s\n" , + chip->chip_status &VX_STAT_DEVICE_INIT ?"Yes" :"No" );snd_iprintf (buffer,"DSP audio info:" );if (chip->audio_info &VX_AUDIO_INFO_REAL_TIME )snd_iprintf (buffer," realtime" );
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"TI" == Takashi Iwai <[email protected]> writes:
TI> Does your kernel support hotplug firmware loader (CONFIG_FW_LOADER)? TI> And is hotplug working?
TI> Check whether /proc/asound/devices whether you have a "[1-0] hardware TI> dependent device". If you have it, the hotplug firmware loader isn't TI> enabled. Use vxloader, run "vxloader -c1".
Theres no such line there now. It was earlier today though... Hmmm
Sticking in the card now leaves the following trail in /var/log/messages:
Jan 15 00:25:34 localhost kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Jan 15 00:25:34 localhost cardmgr[2616]: socket 0: Digigram VX-POCKET440 Jan 15 00:25:35 localhost kernel: snd-vxp440: RequestIO: Resource in use Jan 15 00:25:35 localhost cardmgr[2616]: get dev info on socket 0 failed: No such device
and "/sbin/lsmod | grep vx" shows a list of snd_vxp440 and friends.
However, theres no trace inside /proc/asound/cards or any /proc/asound/card1/ directory, and i cant find the card anywhere else.
$ amixer -c 1 amixer: Mixer attach hw:1 error: No such device
TI> With the attached patch, you can check whether the firmware is loaded TI> or not via the proc file.
Which proc file are you suggesting here?
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
Thanks alot for response. It got me further, but still no sound out. Anybody got a clue where this gets wrong?
Quoted 3 lines
Quoted 3 lines
Quoted 1 line
"TI" == Takashi Iwai <[email protected]> writes:
alsa is version 1.0.7
TI> vxpocket/vxp440 driver in ALSA 1.0.7 has a severe bug. TI> Try ALSA 1.0.8 instead.
TI>
TI> On ALSA 1.0.8, the firmware is loaded via hotplug automatically, so TI> you don't need vxloader. (It's only for 2.6 kernels.) TI> Don't forget to update alsa-firmware, too.
With alsa-1.0.8, and upgraded firmware it behaves as follows. Pcmcia card is card-1, builtin sound is card-0:
$ alsamixer -c1 alsamixer: function snd_ctl_open failed for hw:1: No such device
Plugging in the card gives output:
$ alsamixer -c1 No mixer elems found
And trying to play through the pcmcia-card does not work:
$ aplay -D hw:0,0 test.wav Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo $ aplay -D hw:1,0 test.wav ALSA lib pcm_hw.c:1174:(snd_pcm_hw_open) open /dev/snd/pcmC1D0p failed: No such device aplay: main:508: audio open error: No such device
Seems the card is detected
$ cat /proc/asound/cards 0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4 Intel 82801DB-ICH4 with STAC9750/51 at 0xf4fff800, irq 17 1 [VXPocket440 ]: VXPocket440 - Digigram VXPocket440 Digigram VXPocket440 at 0x100, irq 3
But all "parameters" are set to zero or something.
$ cat /proc/asound/card1/vx-status Digigram VXPocket440 at 0x100, irq 3 DSP audio info: Input Source: Line Clock Mode: Auto Clock Source: Internal Frequency: 0 Detected Frequency: 0 Detected UER type: Consumer Min/Max/Cur IBL: 0/0/0 (granularity=0)
$ cat /proc/asound/devices
0: [0- 0]: ctl
20: [0- 4]: digital audio playback
27: [0- 3]: digital audio capture
26: [0- 2]: digital audio capture
25: [0- 1]: digital audio capture
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
1: : sequencer
33: : timer
32: [1- 0]: ctl
36: [1- 0]: hardware dependent$ uname -a Linux localhost 2.6.10-2.1.ll.rhfc2.ccrma #1 Thu Dec 30 06:24:24 EST 2004 i686 i686 i386 GNU/Linux $
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt