Everything up and running with HTB/SFQ
I dropped the entire PRIO setup and went with a single HTB qdisc with SFQs in each class, and it's working really well. Am I correct in the observation that the rate of a HTB class doesn't matter if all classes have different prios?
Thanks to everyone for their help (and to the authors for the HOWTO)!
Signature · 6 lines
Frank v Waveren Fingerprint: 21A7 C7F3 fvw@[var.cx|stack.nl|chello.nl] ICQ#10074100 1FF3 47FF 545C CB53 Public key: hkp://wwwkeys.pgp.net/[email protected] 7BD9 09C0 3AC1 6DF2 _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 4 lines · Frank v Waveren
I dropped the entire PRIO setup and went with a single HTB qdisc with SFQs in each class, and it's working really well. Am I correct in the observation that the rate of a HTB class doesn't matter if all classes have different prios?
No. The rate is still used as a minimum. So each class will get at least its rate. The prio is used to distribute the remaining bandwidht AND to give some classes a lower latency.
Stef
Signature · 8 lines
[email protected] "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/