Skip to contentSkip to conversation

Everything up and running with HTB/SFQ

LARTC Frank v Waveren 2 participants 2 messages Apr 23, 2003

lore
Share & tools
lore
#0 lore raw

I dropped the entire PRIO setup and went with a single HTB qdisc with SFQs in each class, and it's working really well. Am I correct in the observation that the rate of a HTB class doesn't matter if all classes have different prios?

Thanks to everyone for their help (and to the authors for the HOWTO)!

Signature · 6 lines
Frank v Waveren                                      Fingerprint: 21A7 C7F3
fvw@[var.cx|stack.nl|chello.nl] ICQ#10074100            1FF3 47FF 545C CB53
Public key: hkp://wwwkeys.pgp.net/[email protected]            7BD9 09C0 3AC1 6DF2
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
#1 lore raw
Quoted 4 lines · Frank v Waveren

I dropped the entire PRIO setup and went with a single HTB qdisc with SFQs in each class, and it's working really well. Am I correct in the observation that the rate of a HTB class doesn't matter if all classes have different prios?

No. The rate is still used as a minimum. So each class will get at least its rate. The prio is used to distribute the remaining bandwidht AND to give some classes a lower latency.

Stef

Signature · 8 lines
[email protected]
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/