HTB : quantum of class <class ID> is small. Consider r2q change.
I have a number of classes with HTB qdiscs feeding into a root HTB qdisc. Whenever I set the rate on any of the subordinate qdiscs to 78 kpbs or less, I get the following message:
HTB : quantum of class <class ID> is small. Consider r2q change.
I have no clue what this means or how I might fix it. Can anyone help?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Re: [LARTC] HTB : quantum of class <class ID> is small. Consider
Oops - I just discovered Stef's FAQ search capability and found the answer for myself. For those who are interested:
http://qos.dyndns.org:3389/cgi-bin/fom?&file1
Quoted 4 lines · Patrick Turley
I have a number of classes with HTB qdiscs feeding into a root HTB qdisc. Whenever I set the rate on any of the subordinate qdiscs to 78 kpbs or less, I get the following message:
Quoted 8 lines
HTB : quantum of class <class ID> is small. Consider r2q change.
I have no clue what this means or how I might fix it. Can anyone help?
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Re: [LARTC] HTB : quantum of class <class ID> is small. Consider
In reply to Patrick TurleyOops again. While the note I indicated below is VERY informative, it's not at all clear why HTB would complain if the rate is 78Kbit - that corresponds to a quantum of 7800 bytes, which is plenty large.
Yes, I know I said I mispelled "kpbs" below, and I also know that the correct way to say "kilobits per second" to HTB is to say "Kbit".
Quoted 15 lines · Patrick Turley
Oops - I just discovered Stef's FAQ search capability and found the answer for myself. For those who are interested:
http://qos.dyndns.org:3389/cgi-bin/fom?&file1
Quoted 9 lines · Patrick Turley
I have a number of classes with HTB qdiscs feeding into a root HTB qdisc. Whenever I set the rate on any of the subordinate qdiscs to 78 kpbs or less, I get the following message:
HTB : quantum of class <class ID> is small. Consider r2q change.
I have no clue what this means or how I might fix it. Can anyone help?
Quoted 7 lines
Quoted 3 lines
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/