Skip to contentSkip to conversation

HTB : quantum of class <class ID> is small. Consider r2q change.

LARTC Patrick Turley 1 participant 3 messages Aug 6, 2003

lore
Share & tools
lore
#0 lore raw

I have a number of classes with HTB qdiscs feeding into a root HTB qdisc. Whenever I set the rate on any of the subordinate qdiscs to 78 kpbs or less, I get the following message:

HTB : quantum of class <class ID> is small. Consider r2q change.

I have no clue what this means or how I might fix it. Can anyone help?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#1 lore raw

Re: [LARTC] HTB : quantum of class <class ID> is small. Consider

Oops - I just discovered Stef's FAQ search capability and found the answer for myself. For those who are interested:

http://qos.dyndns.org:3389/cgi-bin/fom?&file1

Quoted 4 lines · Patrick Turley

I have a number of classes with HTB qdiscs feeding into a root HTB qdisc. Whenever I set the rate on any of the subordinate qdiscs to 78 kpbs or less, I get the following message:

Quoted 8 lines

HTB : quantum of class <class ID> is small. Consider r2q change.

I have no clue what this means or how I might fix it. Can anyone help?

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

#2 lore raw

Re: [LARTC] HTB : quantum of class <class ID> is small. Consider

In reply to Patrick Turley

Oops again. While the note I indicated below is VERY informative, it's not at all clear why HTB would complain if the rate is 78Kbit - that corresponds to a quantum of 7800 bytes, which is plenty large.

Yes, I know I said I mispelled "kpbs" below, and I also know that the correct way to say "kilobits per second" to HTB is to say "Kbit".

Quoted 15 lines · Patrick Turley

Oops - I just discovered Stef's FAQ search capability and found the answer for myself. For those who are interested:

http://qos.dyndns.org:3389/cgi-bin/fom?&file1

Quoted 9 lines · Patrick Turley

I have a number of classes with HTB qdiscs feeding into a root HTB qdisc. Whenever I set the rate on any of the subordinate qdiscs to 78 kpbs or less, I get the following message:

HTB : quantum of class <class ID> is small. Consider r2q change.

I have no clue what this means or how I might fix it. Can anyone help?

Quoted 7 lines
Quoted 3 lines

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/