Skip to contentSkip to conversation

Add support for NetCube Systems OpenNMC (dobermann)

PATCH Applied Lukas Schmid 5 participants 9 messages Jun 6 – Jul 6

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

v4 cover Add support for NetCube Systems OpenNMC (dobermann)

This series adds support for the NetCube Systems OpenNMC.

Sorry for the quick resend. This v4 includes the corrected Makefile target name.

Changes in v4:
- fix the ARM Makefile target name for the new board

Changes in v3:
- actually add the Makefile changes

Changes in v2:
- fixed ordering of compatible enum
- fixed gpio line names

---
Lukas Schmid (3):
dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann)
riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube
Systems OpenNMC
ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann)

 .../devicetree/bindings/arm/sunxi.yaml        |   1 +
 arch/arm/boot/dts/allwinner/Makefile          |   2 +
 .../sun8i-t113s-netcube-dobermann.dts         | 149 ++++++++++++++++++
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    |   6 +
 4 files changed, 158 insertions(+)
 create mode 100644 arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts
Signature · 1 line
2.47.3
#1 lore raw

PATCH v4 1/3 dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann)

The OpenNMC is an open replacement for APC SmartSlot management cards based on the Nagami System-on-Module.

---
 Documentation/devicetree/bindings/arm/sunxi.yaml | 1 +
 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/sunxi.yaml +1 -0
index e6443c266fa1..077b65507645 100644
@@ -598,6 +598,7 @@ properties:
       - description: NetCube Systems Nagami SoM based boards
         items:
           - enum:
+              - netcube,dobermann
               - netcube,nagami-basic-carrier
               - netcube,nagami-keypad-carrier
           - const: netcube,nagami
Signature · 1 line
2.47.3
Acked-by on v4 1/3
#2 lore raw

Re: [PATCH v4 1/3] dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann)

Quoted 7 lines · Lukas Schmid

The OpenNMC is an open replacement for APC SmartSlot management cards based on the Nagami System-on-Module.

---
 Documentation/devicetree/bindings/arm/sunxi.yaml | 1 +
 1 file changed, 1 insertion(+)

Best regards,
Krzysztof

#3 lore raw

PATCH v4 2/3 riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube Systems OpenNMC

In reply to Lukas Schmid

Added the "uart4_pb_pins" pinctrl used by the OpenNMC

---
 arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 6 ++++++
 1 file changed, 6 insertions(+)
arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +6 -0
index 82cc85acccb1..00fddedfa36f 100644
@@ -191,6 +191,12 @@ uart3_pb_pins: uart3-pb-pins {
 				pins = "PB6", "PB7";
 				function = "uart3";
 			};
+
+			/omit-if-no-ref/
+			uart4_pb_pins: uart4-pb-pins {
+				pins = "PB2", "PB3";
+				function = "uart4";
+			};
 		};
 
 		ccu: clock-controller@2001000 {
Signature · 1 line
2.47.3
Reviewed-by on v4 2/3
#4 lore raw

Re: [PATCH v4 2/3] riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube Systems OpenNMC

Hi,

Quoted 1 line · Lukas Schmid

Added the "uart4_pb_pins" pinctrl used by the OpenNMC

Checked against the datasheet:

Cheers,
Andre

Quoted 23 lines
---
  arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 6 ++++++
  1 file changed, 6 insertions(+)
arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi +6 -0
index 82cc85acccb1..00fddedfa36f 100644
@@ -191,6 +191,12 @@ uart3_pb_pins: uart3-pb-pins {
  				pins = "PB6", "PB7";
  				function = "uart3";
  			};
+
+			/omit-if-no-ref/
+			uart4_pb_pins: uart4-pb-pins {
+				pins = "PB2", "PB3";
+				function = "uart4";
+			};
  		};
 
  		ccu: clock-controller@2001000 {
#5 lore raw

PATCH v4 3/3 ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann)

In reply to Lukas Schmid

NetCube Systems OpenNMC is an open replacement for APC SmartSlot Management Cards. It is based on the Nagami System-on-Module. It breaks out the following interfaces:

- 10/100 Mbps Ethernet
- USB Type-C OTG using a TUSB320 (usb0)
- USB Type-C Console Port using a CH340 (uart3)
- USB Type-A Host with internal CH334 USB-Hub (usb1)
- MicroSD Slot with Card-Detect (mmc0)
- WiFi/Bluetooth using the modules built-in ESP32
- SmartSlot serial interface (uart4)
- DS3232 RTC with CR1220 Battery Backup
- Extension connector providing SPI,I2C,USB,CAN,UART for future use.

---
 arch/arm/boot/dts/allwinner/Makefile          |   2 +
 .../sun8i-t113s-netcube-dobermann.dts         | 149 ++++++++++++++++++
 2 files changed, 151 insertions(+)
 create mode 100644 arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts
arch/arm/boot/dts/allwinner/Makefile +2 -0
index f71392a55df8..0fc954d41595 100644
@@ -201,6 +201,7 @@ DTC_FLAGS_sun8i-h3-orangepi-pc := -@
 DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@
 DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@
 DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@
+DTC_FLAGS_sun8i-t113s-netcube-dobermann := -@
 DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@
 dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a23-evb.dtb \
@@ -261,6 +262,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-s3-pinecube.dtb \
 	sun8i-t113s-mangopi-mq-r-t113.dtb \
+	sun8i-t113s-netcube-dobermann.dtb \
 	sun8i-t113s-netcube-nagami-basic-carrier.dtb \
 	sun8i-t113s-netcube-nagami-keypad-carrier.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts new file +149 -0

149 lines not on this page · raw message

Signature · 1 line
2.47.3
maintainer Acked-by on v4 3/3
#6 lore raw

Re: [PATCH v4 3/3] ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann)

Dne sobota, 6. junij 2026 ob 22:54:43 Srednjeevropski poletni čas je Lukas Schmid napisal(a):

Quoted 14 lines

NetCube Systems OpenNMC is an open replacement for APC SmartSlot Management Cards. It is based on the Nagami System-on-Module. It breaks out the following interfaces:

- 10/100 Mbps Ethernet
- USB Type-C OTG using a TUSB320 (usb0)
- USB Type-C Console Port using a CH340 (uart3)
- USB Type-A Host with internal CH334 USB-Hub (usb1)
- MicroSD Slot with Card-Detect (mmc0)
- WiFi/Bluetooth using the modules built-in ESP32
- SmartSlot serial interface (uart4)
- DS3232 RTC with CR1220 Battery Backup
- Extension connector providing SPI,I2C,USB,CAN,UART for future use.

Quoted 1 line

DT Check passes, so:

Best regards,
Jernej

maintainer Applied
#7 lore raw
In reply to Lukas Schmid
Quoted 9 lines · Lukas Schmid

This series adds support for the NetCube Systems OpenNMC.

Sorry for the quick resend. This v4 includes the corrected Makefile target name.

Changes in v4:
- fix the ARM Makefile target name for the new board

[...]

Applied to sunxi/dt-for-7.3 in sunxi, thanks!

[1/3] dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann)

      https://git.kernel.org/sunxi/linux/c/9995c8146bb9
[2/3] riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube Systems OpenNMC
      https://git.kernel.org/sunxi/linux/c/5b0fd777eb34
[3/3] ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann)
      https://git.kernel.org/sunxi/linux/c/9dc45b17fb85

Best regards,

Signature · 1 line
Chen-Yu Tsai <[email protected]>
maintainer
#8 lore raw
Quoted 12 lines · Chen-Yu Tsai
Quoted 9 lines · Lukas Schmid

This series adds support for the NetCube Systems OpenNMC.

Sorry for the quick resend. This v4 includes the corrected Makefile target name.

Changes in v4:
- fix the ARM Makefile target name for the new board

[...]

Quoted 8 lines

Applied to sunxi/dt-for-7.3 in sunxi, thanks!

[1/3] dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann)

      https://git.kernel.org/sunxi/linux/c/9995c8146bb9
[2/3] riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube Systems OpenNMC
      https://git.kernel.org/sunxi/linux/c/5b0fd777eb34
[3/3] ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann)
      https://git.kernel.org/sunxi/linux/c/9dc45b17fb85

Force pushed this one to change "sunxi" to "allwinner".

Quoted 6 lines

Best regards,
--
Chen-Yu Tsai <[email protected]>