Skip to content

arm, da85x: updates for the ipam390 board

Heiko Schocher u-boot 2 versions – New

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v2 Latest2 patches 0 repliesNew
  2. v12 patches 0 repliesSuperseded

Patches in v2 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/2nand, davinci: add special UBL ecc positiondrivers/mtd/nand/davinci_nand.c+12 -01 reply
2/2arm, da85x: update for the ipam390 boardboard/Barix/ipam390/ipam390-ais-uart.cfg board/Barix/ipam390/ipam390.c include/configs/ipam390.h+32 -341 reply

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v2 yet.

Read the v2 thread

Cover letter [U-Boot] [PATCH v2 0/2] arm, da85x: updates for the ipam390 board

enable the RBL/UBL ECC layout through
CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC define

see for more info:
http://processors.wiki.ti.com/index.php/DM365_Nand_ECC_layout

and use this on the ipam390 board. Also do some minor changes for this board:

- update default environment
- change A2CR to correct value for UART boot mode
- adapt cs3cfg timings for nand
- change LED bootmode signalization

- changes for v2:
- patch: nand, davinci: add special UBL ecc position
- add comment from Scott Wood:
- move if/else/end to a more readable place

Heiko Schocher (2):
nand, davinci: add special UBL ecc position
arm, da85x: update for the ipam390 board

 board/Barix/ipam390/ipam390-ais-uart.cfg |  2 +-
 board/Barix/ipam390/ipam390.c            | 29 ++++++++------------------
 drivers/mtd/nand/davinci_nand.c          | 12 +++++++++++
 include/configs/ipam390.h                | 35 ++++++++++++++++++++------------

4 Dateien ge?ndert, 44 Zeilen hinzugef?gt(+), 34 Zeilen entfernt(-)

Signature · 1 line
1.7.11.7