Skip to content

drm: panel: add support for TDO tl070wsh30 panel

Neil Armstrong dri-devel linux-amlogic linux-devicetree lkml 3 versions – In review

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v4 Latest4 patches 6 repliesIn review
  2. v34 patches 1 replySuperseded
  3. v23 patches 5 repliesSuperseded

Patches in v4 No applies recorded yet

#Subject and filesSizeRepliesApplied
1/4dt-bindings: vendor-prefixes: Add Shanghai Top Display Optolelectronics vendor prefixDocumentation/devicetree/bindings/vendor-prefixes.yaml+2 -01 reply
2/4dt-bindings: display: panel-simple-dsi: add optional reset gpioDocumentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml+1 -01 reply
3/4dt-bindings: display: panel-simple-dsi: add TDO TL070WSH30 DSI panel bindingsDocumentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml+2 -01 reply
4/4drm: panel: add TDO tl070wsh30 panel driverdrivers/gpu/drm/panel/Kconfig drivers/gpu/drm/panel/Makefile drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c+262 -00 replies

Reviews trailers per patch

3 of 4 patches have a Reviewed-by or Acked-by of their own; the series has one for all of them.

PatchRob HerringSam Ravnborg
SeriesR-b
1/4A-b
2/4A-b
3/4A-b
4/4

Trailers given in replies are filled; those carried in the patches from earlier versions are outlined with dashes.

Read the v4 thread

Cover letter [PATCH v4 0/4] drm: panel: add support for TDO tl070wsh30 panel

This adds support bindings and support for the TDO TL070WSH30 TFT-LCD panel module shipped with the Amlogic S400 Development Kit.
The panel has a 1024×600 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI interface to the host, a built-in LED backlight and touch controller.

Changes since v3 at [3]:
- reordered tdo vendor prefix

Changes since v2 at [2]:
- added reset gpio to panel-simple-dsi bindings
- moved bindings to panel-simple
- re-ordered prepare/unprepare
- added back refresh print
- moved regulator/reset handling in prepare/unprepare
- aligned remove/shutdown with panel-simple
- added sentinel comment into dt match table

Changes since v1 at [1]:
- added missing vendor-prefixes patch
- removed vrefresh
- fixed warning on add_panel return
- removed DRM logging

[1] https://patchwork.freedesktop.org/series/81376/#rev1
[2] https://patchwork.freedesktop.org/series/81376/#rev2
[3] https://patchwork.freedesktop.org/series/81376/#rev3

Neil Armstrong (4):
dt-bindings: vendor-prefixes: Add Shanghai Top Display
Optolelectronics vendor prefix
dt-bindings: display: panel-simple-dsi: add optional reset gpio
dt-bindings: display: panel-simple-dsi: add TDO TL070WSH30 DSI panel
bindings
drm: panel: add TDO tl070wsh30 panel driver

 .../display/panel/panel-simple-dsi.yaml       |   3 +
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 drivers/gpu/drm/panel/Kconfig                 |  11 +
 drivers/gpu/drm/panel/Makefile                |   1 +
 drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c  | 250 ++++++++++++++++++
 5 files changed, 267 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-tdo-tl070wsh30.c
Signature · 6 lines
2.22.0

_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel