Skip to content

arm64: dts: ti: k3-j7200-common-proc-board fixes

Udit Kumar linux-arm-kernel linux-devicetree lkml 3 versions – Applied

Status from this message: I have applied the following to branch ti-k3-dts-next on [1].

Get series with b4
b4 am [email protected]

Versions newest first · linked by author and title

  1. v3 Latest2 patches 1 replyApplied
  2. v22 patches 2 repliesSuperseded
  3. v12 patches 6 repliesSuperseded

Changes in v3 from the cover letter

Patches in v3 Applied

#Subject and filesSizeRepliesApplied
1/2arm64: dts: ti: k3-j7200: Fix physical address of pinarch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts+14 -140 replies
2/2arm64: dts: ti: k3-j7200-som: Enable I2Carch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi+21 -00 replies

Reviews trailers per patch

No Reviewed-by, Acked-by or Tested-by trailers for v3 yet.

Read the v3 thread

Cover letter [PATCH v3 0/2] arm64: dts: ti: k3-j7200-common-proc-board fixes

This patch series fixes the pin mux configuration and enable wkup_i2c0 at board level.

Note to self: in u-boot i2c pin mux is set in R5 board file. which will moved to som file, Fix that too when syncing kernel and uboot DTS files.

Changes since v2:
https://lore.kernel.org/all/[email protected]/
Pin Mux (Patch 1/1):
- No Change

wkup_i2c:
- Added pin mux
- Added speed

Changes since v1:
https://lore.kernel.org/all/[email protected]/
Pin mux:
- Fixed commit message and author

wkup_i2c:
- Removed Fixes tag in commit message
- Moved wkup_i2c in som instead of common board
- Added eeprom as child device

Keerthy (1):
arm64: dts: ti: k3-j7200: Fix physical address of pin

Udit Kumar (1):
arm64: dts: ti: k3-j7200-som: Enable I2C

 .../dts/ti/k3-j7200-common-proc-board.dts     | 28 +++++++++----------
 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi   | 21 ++++++++++++++
 2 files changed, 35 insertions(+), 14 deletions(-)
Signature · 1 line
2.34.1