wonder shaper problems
I just installed Xandros 2.0 Desktop. I used apt-get to install iproute. I then downloaded wondershaper 1.1a from the website. I edited the script as the readme says.
I went to console and started the wondershaper script...and i get the following error messages.
RTNETLINK answers: Invalid Argument
many times.
Any ideas what is wrong?
MArk
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Hi Mark
Quoted 7 lines
I went to console and started the wondershaper script...and i get the following error messages.
RTNETLINK answers: Invalid Argument
many times.
Any ideas what is wrong?
Take a look at the archives over the last week or so. This generic question has been raised a few times just recently.
Quoted 1 line
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
(basically, you're missing kernel modules/config)
Signature · 11 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: [email protected] SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org --- _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
That is what i was afraid of. I have no idea how to re-compile the QoS modules into the Xandros kernel.
Mark
----- Original Message -----
From: "Damion de Soto" <[email protected]>
To: "Mark Ryan" <[email protected]>
Cc: <[email protected]>
Sent: Thursday, January 29, 2004 6:44 PM
Subject: Re: [LARTC] wonder shaper problems
Quoted 11 lines
Hi Mark
Quoted 7 lines
I went to console and started the wondershaper script...and i get the following error messages.
RTNETLINK answers: Invalid Argument
many times.
Any ideas what is wrong?
Quoted 16 lines
Take a look at the archives over the last week or so. This generic question has been raised a few times just recently.
Quoted 1 line
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
(basically, you're missing kernel modules/config)
Signature · 7 lines
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: [email protected] SnapGear - A CyberGuard Company --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org ---
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/