Skip to contentSkip to conversation

drm/i915: Extract forcewake ack timeout

PATCH In review Ben Widawsky 4 participants 7 messages Sep 2, 2012 – Sep 3, 2012

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/4 drm/i915: Extract forcewake ack timeout

It's used all over the place, and we want to be able to play around with the value, apparently. Note that it doesn't touch other timeouts of the same value (like gtfifo, and thread C0 wait).

---
 drivers/gpu/drm/i915/intel_pm.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +12 -5
index c0721ff..f42c142 100644
@@ -31,6 +31,8 @@
 #include "../../../platform/x86/intel_ips.h"
 #include <linux/module.h>
 
+#define FORCEWAKE_ACK_TIMEOUT_US 500
+
 /* FBC, or Frame Buffer Compression, is a technique employed to compress the
  * framebuffer contents in-memory, aiming at reducing the required bandwidth
  * during in-memory transfers and, therefore, reduce the power packet.
@@ -3968,13 +3970,15 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
 	else
 		forcewake_ack = FORCEWAKE_ACK;
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0, 500))
+	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0,
+			       FORCEWAKE_ACK_TIMEOUT_US))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	I915_WRITE_NOTRACE(FORCEWAKE, 1);
 	POSTING_READ(FORCEWAKE);
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1), 500))
+	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1),
+			       FORCEWAKE_ACK_TIMEOUT_US))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	__gen6_gt_wait_for_thread_c0(dev_priv);
@@ -3989,13 +3993,15 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
 	else
 		forcewake_ack = FORCEWAKE_MT_ACK;
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0, 500))
+	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0,
+			       FORCEWAKE_ACK_TIMEOUT_US))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(1));
 	POSTING_READ(FORCEWAKE_MT);
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1), 500))
+	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1),
+			       FORCEWAKE_ACK_TIMEOUT_US))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	__gen6_gt_wait_for_thread_c0(dev_priv);
@@ -4082,7 +4088,8 @@ static void vlv_force_wake_get(struct drm_i915_private *dev_priv)
 	I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffffffff);
 	POSTING_READ(FORCEWAKE_VLV);
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1), 500))
+	if (wait_for_atomic_us((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1),
+			       FORCEWAKE_ACK_TIMEOUT_US))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	__gen6_gt_wait_for_thread_c0(dev_priv);
Signature · 1 line
1.7.12
#1 lore raw

PATCH 2/4 drm/i915: use cpu_relax() in wait_for_atomic

As part of the advice given to us from the hardware designers regarding the maximum wait time on the forcewake handshake we need to move from us granularity to ms granularity. In earlier patches to do this, Jani noticed that wait_for_us was properly converted to use cpu_relax(), but wait_for was not.

The issue has existed since the introduction of the macro:
commit 913d8d110078788c14812dce8bb62c37946821d2

Author: Chris Wilson <[email protected]>
Date:   Sat Aug 7 11:01:35 2010 +0100

drm/i915: Ensure that while(INREG()) are bounded (v2)

---
 drivers/gpu/drm/i915/intel_drv.h | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_drv.h +5 -1
index 95f635b..1707de5 100644
@@ -41,7 +41,11 @@
 			ret__ = -ETIMEDOUT;				\
 			break;						\
 		}							\
-		if (W && drm_can_sleep()) msleep(W);	\
+		if (W && drm_can_sleep())  {				\
+			msleep(W);					\
+		} else {						\
+			cpu_relax();					\
+		}							\
 	}								\
 	ret__;								\
 })
Signature · 1 line
1.7.12
#2 lore raw

PATCH 3/4 drm/i915: Change forcewake timeout to 2ms

In reply to Ben Widawsky

A designer familiar with the hardware has stated that the forcewake timeout can theoretically be as high as a little over 1ms. Therefore we modify our code to use 2ms (appropriate fudge and because we don't want to round down).

Hopefully this can't prevent spurious timeouts.

---
 drivers/gpu/drm/i915/intel_pm.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +11 -11
index f42c142..2a8468d 100644
@@ -31,7 +31,7 @@
 #include "../../../platform/x86/intel_ips.h"
 #include <linux/module.h>
 
-#define FORCEWAKE_ACK_TIMEOUT_US 500
+#define FORCEWAKE_ACK_TIMEOUT_MS 2
 
 /* FBC, or Frame Buffer Compression, is a technique employed to compress the
  * framebuffer contents in-memory, aiming at reducing the required bandwidth
@@ -3970,15 +3970,15 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
 	else
 		forcewake_ack = FORCEWAKE_ACK;
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0,
-			       FORCEWAKE_ACK_TIMEOUT_US))
+	if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1) == 0,
+			    FORCEWAKE_ACK_TIMEOUT_MS))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	I915_WRITE_NOTRACE(FORCEWAKE, 1);
 	POSTING_READ(FORCEWAKE);
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1),
-			       FORCEWAKE_ACK_TIMEOUT_US))
+	if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1),
+			    FORCEWAKE_ACK_TIMEOUT_MS))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	__gen6_gt_wait_for_thread_c0(dev_priv);
@@ -3993,15 +3993,15 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
 	else
 		forcewake_ack = FORCEWAKE_MT_ACK;
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0,
-			       FORCEWAKE_ACK_TIMEOUT_US))
+	if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1) == 0,
+			    FORCEWAKE_ACK_TIMEOUT_MS))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(1));
 	POSTING_READ(FORCEWAKE_MT);
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1),
-			       FORCEWAKE_ACK_TIMEOUT_US))
+	if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1),
+			    FORCEWAKE_ACK_TIMEOUT_MS))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	__gen6_gt_wait_for_thread_c0(dev_priv);
@@ -4088,8 +4088,8 @@ static void vlv_force_wake_get(struct drm_i915_private *dev_priv)
 	I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffffffff);
 	POSTING_READ(FORCEWAKE_VLV);
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1),
-			       FORCEWAKE_ACK_TIMEOUT_US))
+	if (wait_for_atomic((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1),
+			    FORCEWAKE_ACK_TIMEOUT_MS))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	__gen6_gt_wait_for_thread_c0(dev_priv);
Signature · 1 line
1.7.12
#3 lore raw

PATCH v2 4/4 drm/i915: Never read FORCEWAKE

In reply to Ben Widawsky

The same designer from the previous patch has told us to never read FORCEWAKE. We only do this for the POSTING_READ(), so simply change that to something within the same cacheline (for no reason in particular other than it sounds nice). In the _mt case we can leverage the gtfifodbg check for the POSTING_READ.

This partially reverts
commit 6af2d180f82151cf3d58952e35a4f96e45bc453a

Author: Daniel Vetter <[email protected]>
Date:   Thu Jul 26 16:24:50 2012 +0200

drm/i915: fix forcewake related hangs on snb

v2: commit message, comments about posting read from (Daniel)

---
 drivers/gpu/drm/i915/intel_pm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +4 -4
index 2a8468d..0d71ba7 100644
@@ -3975,7 +3975,7 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
 		DRM_ERROR("Force wake wait timed out\n");
 
 	I915_WRITE_NOTRACE(FORCEWAKE, 1);
-	POSTING_READ(FORCEWAKE);
+	POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */
 
 	if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1),
 			    FORCEWAKE_ACK_TIMEOUT_MS))
@@ -3998,7 +3998,7 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
 		DRM_ERROR("Force wake wait timed out\n");
 
 	I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(1));
-	POSTING_READ(FORCEWAKE_MT);
+	POSTING_READ(ECOBUS); /* something from same cacheline, but !FORCEWAKE */
 
 	if (wait_for_atomic((I915_READ_NOTRACE(forcewake_ack) & 1),
 			    FORCEWAKE_ACK_TIMEOUT_MS))
@@ -4035,14 +4035,14 @@ void gen6_gt_check_fifodbg(struct drm_i915_private *dev_priv)
 static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
 {
 	I915_WRITE_NOTRACE(FORCEWAKE, 0);
-	POSTING_READ(FORCEWAKE);
+	/* gen6_gt_check_fifodbg doubles as the POSTING_READ */
 	gen6_gt_check_fifodbg(dev_priv);
 }
 
 static void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv)
 {
 	I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_DISABLE(1));
-	POSTING_READ(FORCEWAKE_MT);
+	/* gen6_gt_check_fifodbg doubles as the POSTING_READ */
 	gen6_gt_check_fifodbg(dev_priv);
 }
 
Signature · 1 line
1.7.12
Acked-by on v2 4/4
#4 lore raw

Re: [PATCH 4/4 v2] drm/i915: Never read FORCEWAKE

Quoted 5 lines · Ben Widawsky

The same designer from the previous patch has told us to never read FORCEWAKE. We only do this for the POSTING_READ(), so simply change that to something within the same cacheline (for no reason in particular other than it sounds nice). In the _mt case we can leverage the gtfifodbg check for the POSTING_READ.

The first two are Reviewed-by: Chris Wilson <[email protected]> The real meat of the change in the second two look good, so

-Chris

Signature · 1 line
Chris Wilson, Intel Open Source Technology Centre
#5 lore raw

Re: [PATCH 4/4 v2] drm/i915: Never read FORCEWAKE

Quoted 10 lines · Chris Wilson
Quoted 5 lines · Ben Widawsky

The same designer from the previous patch has told us to never read FORCEWAKE. We only do this for the POSTING_READ(), so simply change that to something within the same cacheline (for no reason in particular other than it sounds nice). In the _mt case we can leverage the gtfifodbg check for the POSTING_READ.

The first two are Reviewed-by: Chris Wilson <[email protected]> The real meat of the change in the second two look good, so

All slurped into dinq (with some frobbing due to the vlv patches), thanks. -Daniel

Signature · 3 lines
Daniel Vetter
Mail: [email protected]
Mobile: +41 (0)79 365 57 48
maintainer Reviewed-by on v1 1/4
#6 lore raw
In reply to Ben Widawsky
Quoted 5 lines · Ben Widawsky

It's used all over the place, and we want to be able to play around with the value, apparently. Note that it doesn't touch other timeouts of the same value (like gtfifo, and thread C0 wait).

On the series,

Quoted 70 lines
---
 drivers/gpu/drm/i915/intel_pm.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_pm.c +12 -5
index c0721ff..f42c142 100644
@@ -31,6 +31,8 @@
 #include "../../../platform/x86/intel_ips.h"
 #include <linux/module.h>
 
+#define FORCEWAKE_ACK_TIMEOUT_US 500
+
 /* FBC, or Frame Buffer Compression, is a technique employed to compress the
  * framebuffer contents in-memory, aiming at reducing the required bandwidth
  * during in-memory transfers and, therefore, reduce the power packet.
@@ -3968,13 +3970,15 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
 	else
 		forcewake_ack = FORCEWAKE_ACK;
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0, 500))
+	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0,
+			       FORCEWAKE_ACK_TIMEOUT_US))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	I915_WRITE_NOTRACE(FORCEWAKE, 1);
 	POSTING_READ(FORCEWAKE);
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1), 500))
+	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1),
+			       FORCEWAKE_ACK_TIMEOUT_US))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	__gen6_gt_wait_for_thread_c0(dev_priv);
@@ -3989,13 +3993,15 @@ static void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
 	else
 		forcewake_ack = FORCEWAKE_MT_ACK;
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0, 500))
+	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1) == 0,
+			       FORCEWAKE_ACK_TIMEOUT_US))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	I915_WRITE_NOTRACE(FORCEWAKE_MT, _MASKED_BIT_ENABLE(1));
 	POSTING_READ(FORCEWAKE_MT);
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1), 500))
+	if (wait_for_atomic_us((I915_READ_NOTRACE(forcewake_ack) & 1),
+			       FORCEWAKE_ACK_TIMEOUT_US))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	__gen6_gt_wait_for_thread_c0(dev_priv);
@@ -4082,7 +4088,8 @@ static void vlv_force_wake_get(struct drm_i915_private *dev_priv)
 	I915_WRITE_NOTRACE(FORCEWAKE_VLV, 0xffffffff);
 	POSTING_READ(FORCEWAKE_VLV);
 
-	if (wait_for_atomic_us((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1), 500))
+	if (wait_for_atomic_us((I915_READ_NOTRACE(FORCEWAKE_ACK_VLV) & 1),
+			       FORCEWAKE_ACK_TIMEOUT_US))
 		DRM_ERROR("Force wake wait timed out\n");
 
 	__gen6_gt_wait_for_thread_c0(dev_priv);
Signature · 6 lines
1.7.12

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx