pci/layerscape: add defines for LUT

From: Stuart Yoder <[email protected]>

The per-PCI controller LUT (Look-Up-Table) is a 32-entry table that maps PCI requester IDs (bus/dev/fun) to a stream ID.

Add defines for the register offsets.

---
-v6: first version of this patch, just add the LUT #defines

 .../include/asm/arch-fsl-layerscape/immap_lsch3.h  |    4 ++++
 1 file changed, 4 insertions(+)

index 91f3ce8..d04e336 100644
@@ -86,6 +86,10 @@
 #define PCIE_LUT_BASE				0x80000
 #define PCIE_LUT_LCTRL0				0x7F8
 #define PCIE_LUT_DBG				0x7FC
+#define PCIE_LUT_UDR(n)         (0x800 + (n) * 8)
+#define PCIE_LUT_LDR(n)         (0x804 + (n) * 8)
+#define PCIE_LUT_ENABLE         (1 << 31)
+#define PCIE_LUT_ENTRY_COUNT    32
 
 /* Device Configuration */
 #define DCFG_BASE		0x01e00000

1.7.9.5

Applied to u-boot-fsl-qoriq, awaiting upstream.

Thanks.

York