Cortina Access Drivers Package 2
Subsystems (4)
v5 cover Cortina Access Drivers Package 2
This release adds the following drivers and
integrates support into the Cortina Access
Presidio Engineering Board:
CAxxxx SoC eMMC/SD controller
CAxxxx SoC I2C controller
CAxxxx Soc LED controller
CAxxxx SPI NAND and NOR controller
Changes in v5:
- Rebase code basis on v2020.04-rc5 which has
already incorporated CAxxxx eMMC initial baseline
- Rebase on codebase basis v2020.04-rc5 which already incorporated initial baseline of eMMC DT information
- NAND support removed from presidio-asic board DT.
Changes in v4:
- Rename DT compatible name
- Remove uneccessary if-statement to support 8-bit buswidth
- Remove redundant error msg
- Use symbolic constants in switch statement
- Change DT compatiblity name to match change in driver's name
- Remove unused io_ds and fifo_mode fields from DT
- Utilize standard I2C macros from <i2c.h>
- Return ETIMEDOUT in funcs that can timeout
- Return i2c_xfer_init() result to caller of i2c_read() if it fails within i2c_read() execution
- Fix misc. style guide conformance issues
- Use printf() to report i2c_xfer() runtime errors instead of debug()
- remove unused macros
- remove cortina prefix from macros
- remove use BSS variable
- further cleanup to meet code style guidelines
- add additinal struct comments
- rename DT blink rate symbol
- rename DT blink rate symbol
Changes in v3:
- Fixup syntax issues related to checkpatch.pl cleanup
Changes in v2:
- Add I2C controller
- Add LED controller
- Add SPI NAND and NOR controller
Alex Nemirovsky (3):
board: presidio-asic: update eMMC DT informatino
board: presidio-asic: Add I2C support
board: presidio-asic: Add SPI NOR support
Arthur Li (2):
mmc: ca_dw_mmc: Misc cleanup of driver
i2c: i2c-cortina: added CAxxxx I2C support
Jway Lin (2):
led: led_cortina: Add CAxxx LED support
board: presidio: add LED support
Pengpeng Chen (1):
spi: ca_sflash: Add CAxxxx SPI Flash Controller
MAINTAINERS | 8 + arch/arm/dts/ca-presidio-engboard.dts | 41 +- board/cortina/presidio-asic/presidio.c | 16 +- configs/cortina_presidio-asic-emmc_defconfig | 5 + configs/cortina_presidio-asic-spi-nand_defconfig | 48 ++ configs/cortina_presidio-asic-spi-nor_defconfig | 59 +++ drivers/i2c/Kconfig | 7 + drivers/i2c/Makefile | 1 + drivers/i2c/i2c-cortina.c | 346 ++++++++++++++ drivers/i2c/i2c-cortina.h | 84 ++++ drivers/led/Kconfig | 8 + drivers/led/Makefile | 1 + drivers/led/led_cortina.c | 268 +++++++++++ drivers/mmc/ca_dw_mmc.c | 34 +- drivers/spi/Kconfig | 8 + drivers/spi/Makefile | 1 + drivers/spi/ca_sflash.c | 576 +++++++++++++++++++++++ 17 files changed, 1481 insertions(+), 30 deletions(-) create mode 100644 configs/cortina_presidio-asic-spi-nand_defconfig create mode 100644 configs/cortina_presidio-asic-spi-nor_defconfig create mode 100644 drivers/i2c/i2c-cortina.c create mode 100644 drivers/i2c/i2c-cortina.h create mode 100644 drivers/led/led_cortina.c create mode 100644 drivers/spi/ca_sflash.c
Signature · 1 line
2.7.4
PATCH v5 1/8 mmc: ca_dw_mmc: Misc cleanup of driver
From: Arthur Li <[email protected]>
- Rename DT compatible name
- Remove uneccessary if-statement to support 8-bit buswidth
- Remove redundant error msg
- Use symbolic constants in switch statement
---
Changes in v5:
- Rebase code basis on v2020.04-rc5 which has already incorporated CAxxxx eMMC initial baseline
Changes in v4:
- Rename DT compatible name
- Remove uneccessary if-statement to support 8-bit buswidth
- Remove redundant error msg
- Use symbolic constants in switch statement
Changes in v3: None
Changes in v2:
- Add I2C controller
- Add LED controller
- Add SPI NAND and NOR controller
drivers/mmc/ca_dw_mmc.c | 34 ++++++++++++---------------------- 1 file changed, 12 insertions(+), 22 deletions(-)
drivers/mmc/ca_dw_mmc.c +12 -22
@@ -19,6 +19,7 @@#define SD_CLK_SEL_200MHZ (0x2)#define SD_CLK_SEL_100MHZ (0x1) +#define SD_CLK_SEL_50MHZ (0x0)#define IO_DRV_SD_DS_OFFSET (16)#define IO_DRV_SD_DS_MASK (0xff << IO_DRV_SD_DS_OFFSET)
@@ -44,15 +45,11 @@ static void ca_dwmci_clksel(struct dwmci_host *host)struct ca_dwmmc_priv_data *priv = host->priv;u32 val =readl (priv->sd_dll_reg); -if (host->bus_hz >=200000000 ) { - val &= ~SD_CLK_SEL_MASK ; + val &= ~SD_CLK_SEL_MASK ; +if (host->bus_hz >=200000000 ) val |=SD_CLK_SEL_200MHZ ; - }else if (host->bus_hz >=100000000 ) { - val &= ~SD_CLK_SEL_MASK ; +else if (host->bus_hz >=100000000 ) val |=SD_CLK_SEL_100MHZ ; - }else { - val &= ~SD_CLK_SEL_MASK ; - }writel (val, priv->sd_dll_reg); }
@@ -77,14 +74,14 @@ unsigned int ca_dwmci_get_mmc_clock(struct dwmci_host *host, uint freq)u8 clk_div;switch (sd_clk_sel) { -case 2 : - clk_div =1 ; +case SD_CLK_SEL_50MHZ : + clk_div =4 ;break ; -case 1 : +case SD_CLK_SEL_100MHZ : clk_div =2 ;break ;default : - clk_div =4 ; + clk_div =1 ; }return SD_SCLK_MAX / clk_div / (host->div +1 );
@@ -100,9 +97,6 @@ static int ca_dwmmc_ofdata_to_platdata(struct udevice *dev) host->dev_index =0 ; host->buswidth =dev_read_u32_default (dev,"bus-width" ,1 ); -if (host->buswidth !=1 && host->buswidth !=4 ) -return -EINVAL ; - host->bus_hz =dev_read_u32_default (dev,"max-frequency" ,50000000 ); priv->ds =dev_read_u32_default (dev,"io_ds" ,0x33 ); host->fifo_mode =dev_read_bool (dev,"fifo-mode" );
@@ -118,10 +112,8 @@ static int ca_dwmmc_ofdata_to_platdata(struct udevice *dev)return -EINVAL ; host->ioaddr =dev_read_addr_ptr (dev); -if (host->ioaddr == (void *)FDT_ADDR_T_NONE ) { -printf ("DWMMC: base address is invalid\n" ); +if (!host->ioaddr)return -EINVAL ; - } host->priv = priv;
@@ -140,10 +132,8 @@ static int ca_dwmmc_probe(struct udevice *dev)memcpy (&ca_dwmci_dm_ops, &dm_dwmci_ops,sizeof (struct dm_mmc_ops ));dwmci_setup_cfg (&plat->cfg, host, host->bus_hz,MIN_FREQ ); -if (host->buswidth ==1 ) { - (&plat->cfg)->host_caps &= ~MMC_MODE_8BIT ; - (&plat->cfg)->host_caps &= ~MMC_MODE_4BIT ; - } +if (host->buswidth ==1 ) + (&plat->cfg)->host_caps &= ~(MMC_MODE_8BIT |MMC_MODE_4BIT ); host->mmc = &plat->mmc; host->mmc->priv = &priv->host;
@@ -164,7 +154,7 @@ static int ca_dwmmc_bind(struct udevice *dev) }static const struct udevice_id ca_dwmmc_ids[] = { - { .compatible ="snps,dw-cortina" }, + { .compatible ="cortina,ca-mmc" }, { } };
Signature · 1 line
2.7.4
PATCH v5 2/8 board: presidio-asic: update eMMC DT informatino
In reply to Alex NemirovskyChange DT compatiblity name to match change in driver's name. Remove unused io_ds and fifo_mode fields from DT.
---
Changes in v5:
- Rebase on codebase basis v2020.04-rc5 which already incorporated initial baseline of eMMC DT information
Changes in v4:
- Change DT compatiblity name to match change in driver's name
- Remove unused io_ds and fifo_mode fields from DT
Changes in v3: None
Changes in v2: None
arch/arm/dts/ca-presidio-engboard.dts | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
arch/arm/dts/ca-presidio-engboard.dts +1 -3
@@ -10,11 +10,9 @@ #size-cells = <1>; mmc0: mmc at f4400000 { - compatible = "snps,dw-cortina"; + compatible = "cortina,ca-mmc"; reg = <0x0 0xf4400000 0x1000>; bus-width = <4>; - io_ds = <0x77>; - fifo-mode; sd_dll_ctrl = <0xf43200e8>; io_drv_ctrl = <0xf432004c>; };
Signature · 1 line
2.7.4
PATCH v5 3/8 i2c: i2c-cortina: added CAxxxx I2C support
In reply to Alex NemirovskyFrom: Arthur Li <[email protected]>
Add I2C controller support for Cortina Access CAxxxx SoCs
---
Changes in v5: None
Changes in v4:
- Utilize standard I2C macros from <i2c.h>
- Return ETIMEDOUT in funcs that can timeout
- Return i2c_xfer_init() result to caller of i2c_read() if it fails within i2c_read() execution
- Fix misc. style guide conformance issues
- Use printf() to report i2c_xfer() runtime errors instead of debug()
Changes in v3: None
Changes in v2: None
MAINTAINERS | 4 + drivers/i2c/Kconfig | 7 + drivers/i2c/Makefile | 1 + drivers/i2c/i2c-cortina.c | 346 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/i2c-cortina.h | 84 +++++++++++ 5 files changed, 442 insertions(+) create mode 100644 drivers/i2c/i2c-cortina.c create mode 100644 drivers/i2c/i2c-cortina.h
MAINTAINERS +4 -0
@@ -181,6 +181,8 @@ F: drivers/gpio/cortina_gpio.c F: drivers/watchdog/cortina_wdt.c F: drivers/serial/serial_cortina.c F: drivers/mmc/ca_dw_mmc.c +F: drivers/i2c/i2c-cortina.c +F: drivers/i2c/i2c-cortina.h ARM/CZ.NIC TURRIS MOX SUPPORT M: Marek Behun <[email protected]>
@@ -694,6 +696,8 @@ F: drivers/gpio/cortina_gpio.c F: drivers/watchdog/cortina_wdt.c F: drivers/serial/serial_cortina.c F: drivers/mmc/ca_dw_mmc.c +F: drivers/i2c/i2c-cortina.c +F: drivers/i2c/i2c-cortina.h MIPS MSCC M: Gregory CLEMENT <[email protected]>
drivers/i2c/Kconfig +7 -0
@@ -85,6 +85,13 @@ config SYS_I2C_CADENCE Say yes here to select Cadence I2C Host Controller. This controller is e.g. used by Xilinx Zynq. +config SYS_I2C_CA + tristate "Cortina-Access I2C Controller" + depends on DM_I2C && CORTINA_PLATFORM + default n + help + Say yes here to select Cortina-Access I2C Host Controller. + config SYS_I2C_DAVINCI bool "Davinci I2C Controller" depends on (ARCH_KEYSTONE || ARCH_DAVINCI)
drivers/i2c/Makefile +1 -0
@@ -12,6 +12,7 @@ obj-$(CONFIG_SYS_I2C) += i2c_core.o obj-$(CONFIG_SYS_I2C_ASPEED) += ast_i2c.o obj-$(CONFIG_SYS_I2C_AT91) += at91_i2c.o obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o +obj-$(CONFIG_SYS_I2C_CA) += i2c-cortina.o obj-$(CONFIG_SYS_I2C_DAVINCI) += davinci_i2c.o obj-$(CONFIG_SYS_I2C_DW) += designware_i2c.o ifdef CONFIG_DM_PCI
drivers/i2c/i2c-cortina.c new file +346 -0
346 lines not on this page · raw message
drivers/i2c/i2c-cortina.h new file +84 -0
84 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v5 3/8 i2c: i2c-cortina: added CAxxxx I2C support
Hello Alex,
Am 17.04.2020 um 03:38 schrieb Alex Nemirovsky:
Quoted 23 lines
From: Arthur Li <[email protected]>
Add I2C controller support for Cortina Access CAxxxx SoCs
Signed-off-by Arthur Li <[email protected]>Signed-off-by Alex Nemirovsky <[email protected]>CC Heiko Schocher <[email protected]>---
Changes in v5: None
Changes in v4:
- Utilize standard I2C macros from <i2c.h>
- Return ETIMEDOUT in funcs that can timeout
- Returni2c_xfer_init()result to caller ofi2c_read()if it fails withini2c_read()execution
- Fix misc. style guide conformance issues
- Useprintf()to reporti2c_xfer()runtime errors instead ofdebug()Changes in v3: None
Changes in v2: None
Quoted 8 lines
MAINTAINERS | 4 + drivers/i2c/Kconfig | 7 + drivers/i2c/Makefile | 1 + drivers/i2c/i2c-cortina.c | 346 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/i2c/i2c-cortina.h | 84 +++++++++++ 5 files changed, 442 insertions(+)create mode 100644
drivers/i2c/i2c-cortina.c
create mode 100644drivers/i2c/i2c-cortina.h
Sorry one more nitpick ... could you please document the new devicetree binding in "doc/device-tree-bindings/i2c/"?
Thanks!
Beside of this, you can add my
bye,
Heiko
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
PATCH v5 4/8 board: presidio-asic: Add I2C support
In reply to Alex NemirovskyAdd I2C board support for Cortina Access Presidio Engineering Board
---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: None
configs/cortina_presidio-asic-emmc_defconfig | 3 +++ 1 file changed, 3 insertions(+)
configs/cortina_presidio-asic-emmc_defconfig +3 -0
@@ -10,6 +10,7 @@ CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_WDT=y
@@ -24,6 +25,8 @@ CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" # CONFIG_NET is not set CONFIG_DM=y CONFIG_CORTINA_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CA=y CONFIG_DM_MMC=y CONFIG_MMC_DW=y CONFIG_MMC_DW_CORTINA=y
Signature · 1 line
2.7.4
PATCH v5 4/8 board: presidio-asic: Add I2C support
Hello Alex,
Am 17.04.2020 um 03:38 schrieb Alex Nemirovsky:
Quoted 28 lines
Add I2C board support for Cortina Access Presidio Engineering Board
Signed-off-by Alex Nemirovsky <[email protected]>CC Heiko Schocher <[email protected]>---
Changes in v5: None
Changes in v4: None
Changes in v3: None
Changes in v2: Noneconfigs/cortina_presidio-asic-emmc_defconfig | 3 +++ 1 file changed, 3 insertions(+)configs/cortina_presidio-asic-emmc_defconfig +1
-0@@ -10,6 +10,7 @@ CONFIG_SHOW_BOOT_PROGRESS=y CONFIG_BOOTDELAY=3 CONFIG_BOARD_EARLY_INIT_R=y CONFIG_SYS_PROMPT="G3#" +CONFIG_CMD_I2C=y CONFIG_CMD_MMC=y CONFIG_CMD_PART=y CONFIG_CMD_WDT=y
configs/cortina_presidio-asic-emmc_defconfig CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" · line 32
Quoted 8 lines
configs/cortina_presidio-asic-emmc_defconfig +2
-0@@ -24,6 +25,8 @@ CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard" # CONFIG_NET is not set CONFIG_DM=y CONFIG_CORTINA_GPIO=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_CA=y CONFIG_DM_MMC=y CONFIG_MMC_DW=y CONFIG_MMC_DW_CORTINA=y
bye,
Heiko
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
PATCH v5 5/8 led: led_cortina: Add CAxxx LED support
In reply to Alex NemirovskyFrom: Jway Lin <[email protected]>
Add Cortina Access LED controller support for CAxxxx SOCs
---
Changes in v5: None
Changes in v4:
- remove unused macros
- remove cortina prefix from macros
- remove use BSS variable
- further cleanup to meet code style guidelines
- add additinal struct comments
- rename DT blink rate symbol
Changes in v3: None
Changes in v2: None
MAINTAINERS | 2 + drivers/led/Kconfig | 8 ++ drivers/led/Makefile | 1 + drivers/led/led_cortina.c | 268 ++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 279 insertions(+) create mode 100644 drivers/led/led_cortina.c
MAINTAINERS +2 -0
@@ -183,6 +183,7 @@ F: drivers/serial/serial_cortina.c F: drivers/mmc/ca_dw_mmc.c F: drivers/i2c/i2c-cortina.c F: drivers/i2c/i2c-cortina.h +F: drivers/led/led_cortina.c ARM/CZ.NIC TURRIS MOX SUPPORT M: Marek Behun <[email protected]>
@@ -698,6 +699,7 @@ F: drivers/serial/serial_cortina.c F: drivers/mmc/ca_dw_mmc.c F: drivers/i2c/i2c-cortina.c F: drivers/i2c/i2c-cortina.h +F: drivers/led/led_cortina.c MIPS MSCC M: Gregory CLEMENT <[email protected]>
drivers/led/Kconfig +8 -0
@@ -35,6 +35,14 @@ config LED_BCM6858 This option enables support for LEDs connected to the BCM6858 HW has blinking capabilities and up to 32 LEDs can be controlled. +config LED_CORTINA + bool "LED Support for Cortina Access CAxxxx SoCs" + depends on LED && (CORTINA_PLATFORM) + help + This option enables support for LEDs connected to the Cortina + Access CAxxxx SOCs. + + config LED_BLINK bool "Support LED blinking" depends on LED
drivers/led/Makefile +1 -0
@@ -8,3 +8,4 @@ obj-$(CONFIG_LED_BCM6328) += led_bcm6328.o obj-$(CONFIG_LED_BCM6358) += led_bcm6358.o obj-$(CONFIG_LED_BCM6858) += led_bcm6858.o obj-$(CONFIG_$(SPL_)LED_GPIO) += led_gpio.o +obj-$(CONFIG_LED_CORTINA) += led_cortina.o
drivers/led/led_cortina.c new file +268 -0
268 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v5 6/8 board: presidio: add LED support
In reply to Alex NemirovskyFrom: Jway Lin <[email protected]>
Add LED support for Cortina Access Presidio Engineering Board
---
Changes in v5: None
Changes in v4:
- rename DT blink rate symbol
Changes in v3: None
Changes in v2: None
arch/arm/dts/ca-presidio-engboard.dts | 31 ++++++++++++++++++++++++++++ configs/cortina_presidio-asic-emmc_defconfig | 2 ++ 2 files changed, 33 insertions(+)
arch/arm/dts/ca-presidio-engboard.dts +31 -0
@@ -64,4 +64,35 @@ spi-max-frequency = <108000000>; }; }; + + leds: led-controller at f43200f0 { + compatible = "cortina,ca-leds"; + reg = <0x0 0xf43200f0 0x40>; + + cortina,blink-rate1 = <256>; + cortina,blink-rate2 = <512>; + + led at 0 { + pin = <0>; + active-low; + blink-sel =<0>; + port = <0>; + off-event = <0>; + label = "led0"; + }; + + led at 1 { + pin = <1>; + active-low; + blink-sel =<1>; + label = "led1"; + }; + + led at 2 { + pin = <2>; + active-low; + label = "led2"; + }; + + }; };
configs/cortina_presidio-asic-emmc_defconfig +2 -0
@@ -27,6 +27,8 @@ CONFIG_DM=y CONFIG_CORTINA_GPIO=y CONFIG_DM_I2C=y CONFIG_SYS_I2C_CA=y +CONFIG_LED=y +CONFIG_LED_CORTINA=y CONFIG_DM_MMC=y CONFIG_MMC_DW=y CONFIG_MMC_DW_CORTINA=y
Signature · 1 line
2.7.4
PATCH v5 7/8 spi: ca_sflash: Add CAxxxx SPI Flash Controller
In reply to Alex NemirovskyFrom: Pengpeng Chen <[email protected]>
Add SPI Flash controller driver for Cortina Access CAxxxx SoCs
---
Changes in v5: None
Changes in v4: None
Changes in v3:
- Fixup syntax issues related to checkpatch.pl cleanup
Changes in v2: None
MAINTAINERS | 2 + drivers/spi/Kconfig | 8 + drivers/spi/Makefile | 1 + drivers/spi/ca_sflash.c | 576 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 587 insertions(+) create mode 100644 drivers/spi/ca_sflash.c
MAINTAINERS +2 -0
@@ -184,6 +184,7 @@ F: drivers/mmc/ca_dw_mmc.c F: drivers/i2c/i2c-cortina.c F: drivers/i2c/i2c-cortina.h F: drivers/led/led_cortina.c +F: drivers/spi/ca_sflash.c ARM/CZ.NIC TURRIS MOX SUPPORT M: Marek Behun <[email protected]>
@@ -700,6 +701,7 @@ F: drivers/mmc/ca_dw_mmc.c F: drivers/i2c/i2c-cortina.c F: drivers/i2c/i2c-cortina.h F: drivers/led/led_cortina.c +F: drivers/spi/ca_sflash.c MIPS MSCC M: Gregory CLEMENT <[email protected]>
drivers/spi/Kconfig +8 -0
@@ -106,6 +106,14 @@ config BCMSTB_SPI be used to access the SPI flash on platforms embedding this Broadcom SPI core. +config CORTINA_SFLASH + bool "Cortina-Access Serial Flash controller driver" + depends on DM_SPI && SPI_MEM + help + Enable the Cortina-Access Serial Flash controller driver. This driver + can be used to access the SPI NOR/NAND flash on platforms embedding this + Cortina-Access IP core. + config CADENCE_QSPI bool "Cadence QSPI driver" help
drivers/spi/Makefile +1 -0
@@ -25,6 +25,7 @@ obj-$(CONFIG_BCM63XX_SPI) += bcm63xx_spi.o obj-$(CONFIG_BCMSTB_SPI) += bcmstb_spi.o obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o obj-$(CONFIG_CF_SPI) += cf_spi.o +obj-$(CONFIG_CORTINA_SFLASH) += ca_sflash.o obj-$(CONFIG_DAVINCI_SPI) += davinci_spi.o obj-$(CONFIG_DESIGNWARE_SPI) += designware_spi.o obj-$(CONFIG_EXYNOS_SPI) += exynos_spi.o
drivers/spi/ca_sflash.c new file +576 -0
576 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v5 8/8 board: presidio-asic: Add SPI NOR support
In reply to Alex NemirovskyAdd SPI NOR support for Cortina Access
Presidio Engineering Board
---
Changes in v5:
- NAND support removed from presidio-asic board DT.
Changes in v4: None
Changes in v3: None
Changes in v2: None
arch/arm/dts/ca-presidio-engboard.dts | 6 +-- board/cortina/presidio-asic/presidio.c | 16 ++++++- configs/cortina_presidio-asic-spi-nand_defconfig | 48 +++++++++++++++++++ configs/cortina_presidio-asic-spi-nor_defconfig | 59 ++++++++++++++++++++++++ 4 files changed, 124 insertions(+), 5 deletions(-) create mode 100644 configs/cortina_presidio-asic-spi-nand_defconfig create mode 100644 configs/cortina_presidio-asic-spi-nor_defconfig
arch/arm/dts/ca-presidio-engboard.dts +2 -4
@@ -53,15 +53,13 @@ }; sflash: sflash-controller at f4324000 { - #address-cells = <2>; - #size-cells = <1>; compatible = "cortina,ca-sflash"; reg = <0x0 0xf4324000 0x50>; reg-names = "sflash-regs"; flash at 0 { compatible = "jedec,spi-nor"; - spi-rx-bus-width = <1>; - spi-max-frequency = <108000000>; + spi-rx-bus-width = <4>; + spi-tx-bus-width = <4>; }; };
board/cortina/presidio-asic/presidio.c +15 -1
@@ -14,7 +14,7 @@#include <asm/psci.h> #include <cpu_func.h> #include <asm/armv8/mmu.h> - +#include <dm/uclass.h> DECLARE_GLOBAL_DATA_PTR ;#define CA_PERIPH_BASE 0xE0000000UL
@@ -70,9 +70,23 @@ static noinline int invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1,return function_id; } +#ifdef CONFIG_CORTINA_SFLASH +static int init_sflash (void ) +{ +struct udevice *dev; + +uclass_first_device (UCLASS_SPI , &dev); + +return 0 ; +} +#endif +int board_early_init_r (void ) {dcache_disable (); +#ifdef CONFIG_CORTINA_SFLASH +init_sflash (); +#endif return 0 ; }
configs/cortina_presidio-asic-spi-nand_defconfig new file +48 -0
48 lines not on this page · raw message
configs/cortina_presidio-asic-spi-nor_defconfig new file +59 -0
59 lines not on this page · raw message
Signature · 1 line
2.7.4