Skip to contentSkip to conversation

MV64460 Burst reads from BootCS

U-Boot-Users joe secund 1 participant 1 message Oct 6, 2006

lore
Share & tools
lore

joe secund

author
#0 lore raw

Hi Roel

I've seen similar behavior using a MV64560 and power PC processor using a Windriver ICE.

Basically I could not read the MV internal registers correctly when I did not plug in a bootrom (leaving empty socket). Was reading zeroes anywhere in memory.

Somehow putting in even an empty Flash device allowed me to initialize the processor correctly and read/write MV registers and burn the flash via ICE.

- Wim

Quoted 6 lines

------------------------------

Message: 5
Date: Sun, 1 Oct 2006 20:19:12 +0200
From: "Roel Loeffen" <roel.loeffen@pr...>
Subject: [U-Boot-Users] MV64460 Burst reads from

BootCS

Quoted 3 lines

To: <u-boot-users@li...>
Message-ID:

<7826EB01AD927140A1DCF898FE63325D0D91B1@Ex...>

Quoted 5 lines

Content-Type: text/plain; charset="iso-8859-1"

Hi all,

We discover some serious problems accessing flash

at BootCS

Quoted 1 line

of the Marvell MV64460. It looks like burst reads

make the

Quoted 1 line

whole bridge hang. >From inside U-Boot as well as

using only

Quoted 3 lines

the BDI2000 debugger.

Reading the flash with bursts enabled (which is

default),

Quoted 2 lines

makes it sometimes impossible to access any registers/dram/devices anymore, only zeros can be

read.

Quoted 2 lines

It also freezes the CPU somehow the debugger cannot

halt it

Quoted 1 line

anymore with a normal halt (COP halt), it has to

use COP

Quoted 3 lines

freeze to take over control again.

I cannot say this problem does not occur accessing

other

Quoted 1 line

spaces, so it can also be a problem at the PPC60x

bus.

Quoted 6 lines

Has anyone over excpirianced this before?

Thanks in advance!

Roel

__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com