ALSA: hda - program ICT bits to support HBR audio
PATCH v2 1/1 ALSA: hda - program ICT bits to support HBR audio
From: Sriram Periyasamy <[email protected]>
On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake, KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital Converter Control #3 needs to be set explicitly for HDMI/DisplayPort High Bit Rate (HBR) audio playback to work. This was not required in earlier platforms when HBR was first introduced. The ICT bits are defined in Section 7.3.3.9 of the HDaudio 1.0a specification.
Since the ICT bitfield was not specified for HDAudio 1.0 devices (before 2009), we only program it on machines more recent than Haswell.
We tested that this fix is not needed on Baytrail-I (MinnowBoard Turbot) and believe by extension it also does not apply to Braswell.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797
---
v2: move digi3 verb in Set section, only set ICT for haswell and newer
include/sound/hda_verbs.h | 1 + sound/pci/hda/patch_hdmi.c | 21 +++++++++++++++++++++ 2 files changed, 22 insertions(+)
include/sound/hda_verbs.h +1 -0
@@ -54,6 +54,7 @@ enum {#define AC_VERB_GET_EAPD_BTLENABLE 0x0f0c#define AC_VERB_GET_DIGI_CONVERT_1 0x0f0d#define AC_VERB_GET_DIGI_CONVERT_2 0x0f0e/* unused */ +#define AC_VERB_SET_DIGI_CONVERT_3 0x73e#define AC_VERB_GET_VOLUME_KNOB_CONTROL 0x0f0f/* f10-f1a: GPIO */ #define AC_VERB_GET_GPIO_DATA 0x0f15
sound/pci/hda/patch_hdmi.c +21 -0
@@ -906,6 +906,7 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid, hda_nid_t pin_nid, u32 stream_tag, int format) { struct hdmi_spec *spec = codec->spec; +unsigned int param;int err; err = spec->ops.pin_hbr_setup (codec, pin_nid,is_hbr_format (format));
@@ -915,6 +916,26 @@ static int hdmi_setup_stream(struct hda_codec *codec, hda_nid_t cvt_nid,return err; } +if (is_haswell_plus (codec)) { + +/* +* on recent platforms IEC Coding Type is required for HBR +* support, read current Digital Converter settings and set +* ICT bitfield if needed. +*/ + param =snd_hda_codec_read (codec, cvt_nid,0 , +AC_VERB_GET_DIGI_CONVERT_1 ,0 ); + + param = (param >>16 ) & ~(AC_DIG3_ICT ); + +/* on recent platforms ICT mode is required for HBR support */ +if (is_hbr_format (format)) + param |=0x1 ; + +snd_hda_codec_write (codec, cvt_nid,0 , +AC_VERB_SET_DIGI_CONVERT_3 , param); + } +snd_hda_codec_setup_stream (codec, cvt_nid, stream_tag,0 , format);return 0 ; }
Signature · 1 line
2.11.0
Quoted 17 lines · Pierre-Louis Bossart
From: Sriram Periyasamy <[email protected]>
On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake, KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital Converter Control #3 needs to be set explicitly for HDMI/DisplayPort High Bit Rate (HBR) audio playback to work. This was not required in earlier platforms when HBR was first introduced. The ICT bits are defined in Section 7.3.3.9 of the HDaudio 1.0a specification.
Since the ICT bitfield was not specified for HDAudio 1.0 devices (before 2009), we only program it on machines more recent than Haswell.
We tested that this fix is not needed on Baytrail-I (MinnowBoard Turbot) and believe by extension it also does not apply to Braswell.
Quoted 7 lines
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797
Signed-off-by Sriram Periyasamy <[email protected]>Signed-off-by Pierre-Louis Bossart <[email protected]>Signed-off-by Subhransu S. Prusty <[email protected]>---
v2: move digi3 verb in Set section, only set ICT for haswell and newer
Applied now with a slight fix (moving *_SET_* definition to the right place).
thanks,
Takashi
Quoted 21 lines · Takashi Iwai
Quoted 19 lines · Pierre-Louis Bossart
From: Sriram Periyasamy <[email protected]>
On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake, KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital Converter Control #3 needs to be set explicitly for HDMI/DisplayPort High Bit Rate (HBR) audio playback to work. This was not required in earlier platforms when HBR was first introduced. The ICT bits are defined in Section 7.3.3.9 of the HDaudio 1.0a specification.
Since the ICT bitfield was not specified for HDAudio 1.0 devices (before 2009), we only program it on machines more recent than Haswell.
We tested that this fix is not needed on Baytrail-I (MinnowBoard Turbot) and believe by extension it also does not apply to Braswell.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797
Quoted 8 lines
Quoted 5 lines
Signed-off-by Sriram Periyasamy <[email protected]>Signed-off-by Pierre-Louis Bossart <[email protected]>Signed-off-by Subhransu S. Prusty <[email protected]>---
v2: move digi3 verb in Set section, only set ICT for haswell and newerApplied now with a slight fix (moving *_SET_* definition to the right place).
Thanks Takashi. Not sure what happened since I have a clear memory of doing that change and making a note of it...
Quoted 28 lines · Pierre-Louis Bossart
Quoted 27 lines · Takashi Iwai
Quoted 24 lines · Pierre-Louis Bossart
From: Sriram Periyasamy <[email protected]>
On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake, KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital Converter Control #3 needs to be set explicitly for HDMI/DisplayPort High Bit Rate (HBR) audio playback to work. This was not required in earlier platforms when HBR was first introduced. The ICT bits are defined in Section 7.3.3.9 of the HDaudio 1.0a specification.
Since the ICT bitfield was not specified for HDAudio 1.0 devices (before 2009), we only program it on machines more recent than Haswell.
We tested that this fix is not needed on Baytrail-I (MinnowBoard Turbot) and believe by extension it also does not apply to Braswell.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797
Signed-off-by Sriram Periyasamy <[email protected]>Signed-off-by Pierre-Louis Bossart <[email protected]>Signed-off-by Subhransu S. Prusty <[email protected]>---
v2: move digi3 verb in Set section, only set ICT for haswell and newer
Quoted 5 lines
Quoted 2 lines
Applied now with a slight fix (moving *_SET_* definition to the right place).
Thanks Takashi. Not sure what happened since I have a clear memory of doing that change and making a note of it...
Hi Takashi,
I think this patch should have also gone to stable. We didn't cc. Please suggest whether we should submit it separately for stable.
Regards,
Subhransu
Quoted 4 lines
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Quoted 33 lines · Subhransu S. Prusty
Quoted 31 lines · Pierre-Louis Bossart
Quoted 29 lines · Takashi Iwai
Quoted 17 lines · Pierre-Louis Bossart
From: Sriram Periyasamy <[email protected]>
On recent Intel platforms (Haswell, Broadwell, Skylake, ApolloLake, KabyLake, ...), the IEC Coding Type (ICT) bitfield in the Digital Converter Control #3 needs to be set explicitly for HDMI/DisplayPort High Bit Rate (HBR) audio playback to work. This was not required in earlier platforms when HBR was first introduced. The ICT bits are defined in Section 7.3.3.9 of the HDaudio 1.0a specification.
Since the ICT bitfield was not specified for HDAudio 1.0 devices (before 2009), we only program it on machines more recent than Haswell.
We tested that this fix is not needed on Baytrail-I (MinnowBoard Turbot) and believe by extension it also does not apply to Braswell.
Quoted 7 lines
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98797
Signed-off-by Sriram Periyasamy <[email protected]>Signed-off-by Pierre-Louis Bossart <[email protected]>Signed-off-by Subhransu S. Prusty <[email protected]>---
v2: move digi3 verb in Set section, only set ICT for haswell and newerApplied now with a slight fix (moving *_SET_* definition to the right place).
Quoted 7 lines
Quoted 2 lines
Thanks Takashi. Not sure what happened since I have a clear memory of doing that change and making a note of it...
Hi Takashi,
I think this patch should have also gone to stable. We didn't cc. Please suggest whether we should submit it separately for stable.
In such a case, please send a mail to Greg KH once after the patch gets merged to Linus tree and tell him the upstream git commit id to cherry-pick for stable kernels.
thanks,
Takashi