drm/arc: Stop consulting plane->fb
Subsystems (3)
PATCH 1/7 drm/arc: Stop consulting plane->fb
From: Ville Syrjälä <[email protected]>
We want to stop using plane->fb with atomic driver, so stop looking at it.
I have no idea what this code is trying to achieve. There is no corresponding check in the enable path. Also since arc_pgu_set_pxl_fmt() will anyway oops if there is no fb I'm going to assuming that I can just remove the check entirely. There seems to be a general shortage of .atomic_check() in this driver...
--- drivers/gpu/drm/arc/arcpgu_crtc.c | 3 --- 1 file changed, 3 deletions(-)
drivers/gpu/drm/arc/arcpgu_crtc.c +0 -3
@@ -136,9 +136,6 @@ static void arc_pgu_crtc_atomic_disable(struct drm_crtc *crtc, {struct arcpgu_drm_private *arcpgu =crtc_to_arcpgu_priv (crtc); -if (!crtc->primary->fb) -return ; -clk_disable_unprepare (arcpgu->clk); arc_pgu_write(arcpgu, ARCPGU_REG_CTRL, arc_pgu_read(arcpgu, ARCPGU_REG_CTRL) &
Signature · 6 lines
2.16.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 2/7 drm/vmwgfx: Stop using plane->fb in vmw_kms_atomic_check_modeset()
From: Ville Syrjälä <[email protected]>
Instead of looking at plane->fb let's look at the proper new plane state.
Not that the code makes a ton of sense. It's only going through the crtcs in the atomic state, so assuming not all of them are included we're not even calculating the total bandwidth here. Also we're not considering whether each crtc is actually enabled or not.
--- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +7 -3
@@ -1536,9 +1536,13 @@ vmw_kms_atomic_check_modeset(struct drm_device *dev,unsigned long requested_bb_mem =0 ;if (dev_priv->active_display_unit == vmw_du_screen_target) { -if (crtc->primary->fb) { -int cpp = crtc->primary->fb->pitches[0 ] / - crtc->primary->fb->width; +struct drm_plane *plane = crtc->primary; +struct drm_plane_state *plane_state; + + plane_state =drm_atomic_get_new_plane_state (state, plane); + +if (plane_state && plane_state->fb) { +int cpp = plane_state->fb->format->cpp[0 ]; requested_bb_mem += crtc->mode.hdisplay * cpp * crtc->mode.vdisplay;
Signature · 6 lines
2.16.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/7] drm/vmwgfx: Stop using plane->fb in vmw_kms_atomic_check_modeset()
Quoted 33 lines
From: Ville Syrjälä <[email protected]>
Instead of looking at
plane->fblet's look at the proper new plane state.Not that the code makes a ton of sense. It's only going through the crtcs in the atomic state, so assuming not all of them are included we're not even calculating the total bandwidth here. Also we're not considering whether each crtc is actually enabled or not.
Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +0
-1@@ -1536,9 +1536,13 @@ vmw_kms_atomic_check_modeset(structdrm_device *dev, unsigned long requested_bb_mem = 0;if (dev_priv->active_display_unit == vmw_du_screen_target) { -if (crtc->primary->fb) {
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c vmw_kms_atomic_check_modeset(struct · line 1548
Quoted 10 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +7
-2-int cpp = crtc->primary->fb->pitches[0 ] / - crtc->primary->fb->width; +struct drm_plane *plane = crtc->primary; +struct drm_plane_state *plane_state; + + plane_state =drm_atomic_get_new_plane_state (state, plane); + +if (plane_state && plane_state->fb) { +int cpp = plane_state->fb->format->cpp[0 ];
Hi Ville,
Thanks for the patch, recently I have done some refactoring of this code area which is no yet sent to dri-devel. But the refactored code eliminated the need to look the fb
https://cgit.freedesktop.org/mesa/vmwgfx/commit/?id=c54cdb6549b7d1c04ff61e639fc0e6de0dcc1ed6
There is still some future work to be done in this area.
Quoted 6 lines
requested_bb_mem+=crtc->mode.hdisplay
* cpp *
crtc->mode.vdisplay;
--
2.16.1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 2/7] drm/vmwgfx: Stop using plane->fb in vmw_kms_atomic_check_modeset()
Quoted 46 lines · Deepak Singh Rawat
Quoted 33 lines
From: Ville Syrjälä <[email protected]>
Instead of looking at
plane->fblet's look at the proper new plane state.Not that the code makes a ton of sense. It's only going through the crtcs in the atomic state, so assuming not all of them are included we're not even calculating the total bandwidth here. Also we're not considering whether each crtc is actually enabled or not.
Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +0
-1@@ -1536,9 +1536,13 @@ vmw_kms_atomic_check_modeset(structdrm_device *dev, unsigned long requested_bb_mem = 0;if (dev_priv->active_display_unit == vmw_du_screen_target) { -if (crtc->primary->fb) {drivers/gpu/drm/vmwgfx/vmwgfx_kms.c vmw_kms_atomic_check_modeset(struct · line 1548
Quoted 10 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +7
-2-int cpp = crtc->primary->fb->pitches[0 ] / - crtc->primary->fb->width; +struct drm_plane *plane = crtc->primary; +struct drm_plane_state *plane_state; + + plane_state =drm_atomic_get_new_plane_state (state, plane); + +if (plane_state && plane_state->fb) { +int cpp = plane_state->fb->format->cpp[0 ];Hi Ville,
Quoted 5 lines
Thanks for the patch, recently I have done some refactoring of this code area which is no yet sent to dri-devel. But the refactored code eliminated the need to look the fb
https://cgit.freedesktop.org/mesa/vmwgfx/commit/?id=c54cdb6549b7d1c04ff61e639fc0e6de0dcc1ed6
Hmm. What's the timelike for landing that stuff?
A cursory glance tells me we should just change the current code with s/cpp/4/ and it should still be fine?
BTW the drm_for_each_crtc(crtc, dev) loop in there doesn't look entirely kosher. It's potentially going to access crtc->state w/o holding the lock.
Quoted 9 lines
There is still some future work to be done in this area.
Quoted 6 lines
requested_bb_mem+=crtc->mode.hdisplay
* cpp *
crtc->mode.vdisplay;
--
2.16.1
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
RE: [PATCH 2/7] drm/vmwgfx: Stop using plane->fb in vmw_kms_atomic_check_modeset()
Quoted 54 lines · Deepak Singh Rawat
Quoted 46 lines
Quoted 33 lines
From: Ville Syrjälä <[email protected]>
Instead of looking at
plane->fblet's look at the proper new plane state.Not that the code makes a ton of sense. It's only going through the crtcs in the atomic state, so assuming not all of them are included we're not even calculating the total bandwidth here. Also we're not considering whether each crtc is actually enabled or not.
Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +0
-1@@ -1536,9 +1536,13 @@ vmw_kms_atomic_check_modeset(structdrm_device *dev, unsigned long requested_bb_mem = 0;if (dev_priv->active_display_unit == vmw_du_screen_target) { -if (crtc->primary->fb) {drivers/gpu/drm/vmwgfx/vmwgfx_kms.c vmw_kms_atomic_check_modeset(struct · line 1548
Quoted 10 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +7
-2-int cpp = crtc->primary->fb->pitches[0 ] / - crtc->primary->fb->width; +struct drm_plane *plane = crtc->primary; +struct drm_plane_state *plane_state; + + plane_state =drm_atomic_get_new_plane_state (state, plane); + +if (plane_state && plane_state->fb) { +int cpp = plane_state->fb->format->cpp[0 ];Hi Ville,
Quoted 1 line
Thanks for the patch, recently I have done some refactoring of this code
area
Quoted 1 line
which is no yet sent to dri-devel. But the refactored code eliminated the
need
Quoted 2 lines
to look the fb
Quoted 8 lines
Quoted 1 line
3A__cgit.freedesktop.org_mesa_vmwgfx_commit_-3Fid- 3Dc54cdb6549b7d1c04ff61e639fc0e6de0dcc1ed6&d=DwIDAw&c=uilaK90D4T OVoH58JNXRgQ&r=zOOG28inJK0762SxAf- cyZdStnd2NQpRu98lJP2iYGw&m=lrHQqnjNpBdFNzU0f4b3rLTtaYp0VRzCgZztJ ew0kz0&s=mz1Kt2NO_HIpgVtQ9xHvKRQLGXx2HSqY8xt0oiEpGWg&e=
Hmm. What's the timelike for landing that stuff?
I am not sure, I still think there is more work here to clean this up. I guess for now we can have your patch to take care of avoiding plane->fb.
Quoted 3 lines
A cursory glance tells me we should just change the current code with s/cpp/4/ and it should still be fine?
Yes replacing cpp with 4 is fine as that is what virtual hardware always look for.
Quoted 3 lines
BTW the
drm_for_each_crtc(crtc, dev)loop in there doesn't look entirely kosher. It's potentially going to accesscrtc->statew/o holding the lock.
Thanks for the suggestion, I will look into this.
Quoted 11 lines
Quoted 10 lines
There is still some future work to be done in this area.
Quoted 6 lines
requested_bb_mem+=crtc->mode.hdisplay
* cpp *
crtc->mode.vdisplay;
--
2.16.1
Quoted 3 lines
--
Ville Syrjälä
Intel OTC
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH 3/7 drm/vmwgfx: Stop using plane->fb in vmw_kms_helper_dirty()
In reply to Ville SyrjalaFrom: Ville Syrjälä <[email protected]>
Instead of plane->fb (which we're going to deprecate for atomic drivers) we need to look at plane->state->fb. The maze of code leading to vmw_kms_helper_dirty() wasn't particularly clear, but my analysis concluded that the calls originating from vmw_*_primary_plane_atomic_update() all pass in the crtc which means we'll never end up in this branch of the function. All other callers use drm_modeset_lock_all() somewhere higher up, which means accessing plane->state is safe. We'll toss in a lockdep assert to catch wrongdoers.
--- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +12 -3
@@ -2326,9 +2326,18 @@ int vmw_kms_helper_dirty(struct vmw_private *dev_priv, }else {list_for_each_entry (crtc, &dev_priv->dev->mode_config.crtc_list, head) { -if (crtc->primary->fb != &framebuffer->base) -continue ; - units[num_units++] =vmw_crtc_to_du (crtc); +struct drm_plane *plane = crtc->primary; + +/* +* vmw_*_primary_plane_atomic_update() pass in the crtc, +* and so don't end up here. All other callers use +* drm_modeset_lock_all(), hence we can access the +* plane state safely. +*/ +lockdep_assert_held (&plane->mutex); + +if (plane->state->fb != &framebuffer->base) + units[num_units++] =vmw_crtc_to_du (crtc); } }
Signature · 6 lines
2.16.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 3/7] drm/vmwgfx: Stop using plane->fb in vmw_kms_helper_dirty()
Quoted 31 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
Instead of
plane->fb(which we're going to deprecate for atomic drivers) we need to look atplane->state->fb. The maze of code leading tovmw_kms_helper_dirty()wasn't particularly clear, but my analysis concluded that the calls originating from vmw_*_primary_plane_atomic_update() all pass in the crtc which means we'll never end up in this branch of the function. All other callers usedrm_modeset_lock_all()somewhere higher up, which means accessingplane->stateis safe. We'll toss in a lockdep assert to catch wrongdoers.Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +0
-3@@ -2326,9 +2326,18 @@ int vmw_kms_helper_dirty(struct vmw_private *dev_priv, }else {list_for_each_entry (crtc, &dev_priv->dev->mode_config.crtc_list, head) { -if (crtc->primary->fb != &framebuffer->base) -continue ; - units[num_units++] =vmw_crtc_to_du (crtc);
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c int vmw_kms_helper_dirty(struct vmw_private *dev_priv, · line 2338
Quoted 10 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +10
-0+struct drm_plane *plane = crtc->primary; + +/* +* vmw_*_primary_plane_atomic_update() pass in the crtc, +* and so don't end up here. All other callers use +* drm_modeset_lock_all(), hence we can access the +* plane state safely. +*/ +lockdep_assert_held (&plane->mutex); +
I think we can remove the comment (it's a helper, so current users may not be future users), but the lockdep assert should be OK.
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c int vmw_kms_helper_dirty(struct vmw_private *dev_priv, · line 2340
Quoted 2 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +2
-0+if (plane->state->fb != &framebuffer->base) + units[num_units++] =vmw_crtc_to_du (crtc);
This doesn't seem to do what the original code did...
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c int vmw_kms_helper_dirty(struct vmw_private *dev_priv, · line 2343
Quoted 3 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +0
-0} }
/Thomas
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 3/7] drm/vmwgfx: Stop using plane->fb in vmw_kms_helper_dirty()
Quoted 37 lines · Thomas Hellstrom
Quoted 36 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
Instead of
plane->fb(which we're going to deprecate for atomic drivers) we need to look atplane->state->fb. The maze of code leading tovmw_kms_helper_dirty()wasn't particularly clear, but my analysis concluded that the calls originating from vmw_*_primary_plane_atomic_update() all pass in the crtc which means we'll never end up in this branch of the function. All other callers usedrm_modeset_lock_all()somewhere higher up, which means accessingplane->stateis safe. We'll toss in a lockdep assert to catch wrongdoers.Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +5
-3@@ -2326,9 +2326,18 @@ int vmw_kms_helper_dirty(struct vmw_private *dev_priv, }else {list_for_each_entry (crtc, &dev_priv->dev->mode_config.crtc_list, head) { -if (crtc->primary->fb != &framebuffer->base) -continue ; - units[num_units++] =vmw_crtc_to_du (crtc); +struct drm_plane *plane = crtc->primary; + +/* +* vmw_*_primary_plane_atomic_update() pass in the crtc, +* and so don't end up here. All other callers use
Quoted 8 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c int vmw_kms_helper_dirty(struct vmw_private *dev_priv, · line 2338
Quoted 5 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +5
-0+* drm_modeset_lock_all(), hence we can access the +* plane state safely. +*/ +lockdep_assert_held (&plane->mutex); +I think we can remove the comment (it's a helper, so current users may not be future users),
but the lockdep assert should be OK.
OK.
Quoted 4 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c int vmw_kms_helper_dirty(struct vmw_private *dev_priv, · line 2340
Quoted 2 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +2
-0+if (plane->state->fb != &framebuffer->base) + units[num_units++] =vmw_crtc_to_du (crtc);This doesn't seem to do what the original code did...
Whoops. Good catch.
Quoted 7 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c int vmw_kms_helper_dirty(struct vmw_private *dev_priv, · line 2343
Quoted 4 lines
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +0
-0} }/Thomas
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
PATCH v2 3/7 drm/vmwgfx: Stop using plane->fb in vmw_kms_helper_dirty()
In reply to Ville SyrjalaFrom: Ville Syrjälä <[email protected]>
Instead of plane->fb (which we're going to deprecate for atomic drivers) we need to look at plane->state->fb. The maze of code leading to vmw_kms_helper_dirty() wasn't particularly clear, but my analysis concluded that the calls originating from vmw_*_primary_plane_atomic_update() all pass in the crtc which means we'll never end up in this branch of the function. All other callers use drm_modeset_lock_all() somewhere higher up, which means accessing plane->state is safe. We'll toss in a lockdep assert to catch wrongdoers.
v2: Drop the comment and make the code do what it did before (Thomas)
--- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +6 -3
@@ -2326,9 +2326,12 @@ int vmw_kms_helper_dirty(struct vmw_private *dev_priv, }else {list_for_each_entry (crtc, &dev_priv->dev->mode_config.crtc_list, head) { -if (crtc->primary->fb != &framebuffer->base) -continue ; - units[num_units++] =vmw_crtc_to_du (crtc); +struct drm_plane *plane = crtc->primary; + +lockdep_assert_held (&plane->mutex); + +if (plane->state->fb == &framebuffer->base) + units[num_units++] =vmw_crtc_to_du (crtc); } }
Signature · 6 lines
2.16.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
kbuild test robot
build botRe: [PATCH 3/7] drm/vmwgfx: Stop using plane->fb in vmw_kms_helper_dirty()
In reply to Ville SyrjalaThank you for the patch! Yet something to improve:
Hi Ville,
Thank you for the patch! Yet something to improve:
[auto build test ERROR on drm/drm-next]
[also build test ERROR on next-20180405]
[cannot apply to v4.16]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system]
url: https://github.com/0day-ci/linux/commits/Ville-Syrjala/drm-arc-Stop-consulting-plane-fb/20180406-155056 base: git://people.freedesktop.org/~airlied/linux.git drm-next config: x86_64-randconfig-x010-201813 (attached as .config) compiler: gcc-7 (Debian 7.3.0-1) 7.3.0 reproduce: # save the attached .config to linux build tree make ARCH=x86_64
All error/warnings (new ones prefixed by >>):
In file included from arch/x86/include/asm/bug.h:83:0,
from include/linux/bug.h:5,
from include/linux/debug_locks.h:7,
from include/linux/lockdep.h:28,
from include/linux/spinlock_types.h:18,
from include/linux/mutex.h:16,
from include/linux/kernfs.h:13,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/cdev.h:5,
from include/drm/drmP.h:36,
from drivers/gpu/drm/vmwgfx/vmwgfx_kms.h:31,
from drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:28:
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c: In function 'vmw_kms_helper_dirty':
>> include/linux/lockdep.h:347:52: error: 'struct drm_modeset_lock' has no member named 'dep_map'
#define lockdep_is_held(lock) lock_is_held(&(lock)->dep_map)
^
include/asm-generic/bug.h:112:25: note: in definition of macro 'WARN_ON'
int __ret_warn_on = !!(condition); \
^~~~~~~~~
>> include/linux/lockdep.h:373:27: note: in expansion of macro 'lockdep_is_held'
WARN_ON(debug_locks && !lockdep_is_held(l)); \
^~~~~~~~~~~~~~~
>> drivers/gpu/drm/vmwgfx/vmwgfx_kms.c:2337:4: note: in expansion of macro 'lockdep_assert_held'
lockdep_assert_held(&plane->mutex);
^~~~~~~~~~~~~~~~~~~
--
In file included from arch/x86/include/asm/bug.h:83:0,
from include/linux/bug.h:5,
from include/linux/debug_locks.h:7,
from include/linux/lockdep.h:28,
from include/linux/spinlock_types.h:18,
from include/linux/mutex.h:16,
from include/linux/kernfs.h:13,
from include/linux/sysfs.h:16,
from include/linux/kobject.h:20,
from include/linux/cdev.h:5,
from include/drm/drmP.h:36,
from drivers/gpu//drm/vmwgfx/vmwgfx_kms.h:31,
from drivers/gpu//drm/vmwgfx/vmwgfx_kms.c:28:
drivers/gpu//drm/vmwgfx/vmwgfx_kms.c: In function 'vmw_kms_helper_dirty':
>> include/linux/lockdep.h:347:52: error: 'struct drm_modeset_lock' has no member named 'dep_map'
#define lockdep_is_held(lock) lock_is_held(&(lock)->dep_map)
^
include/asm-generic/bug.h:112:25: note: in definition of macro 'WARN_ON'
int __ret_warn_on = !!(condition); \
^~~~~~~~~
>> include/linux/lockdep.h:373:27: note: in expansion of macro 'lockdep_is_held'
WARN_ON(debug_locks && !lockdep_is_held(l)); \
^~~~~~~~~~~~~~~
drivers/gpu//drm/vmwgfx/vmwgfx_kms.c:2337:4: note: in expansion of macro 'lockdep_assert_held'
lockdep_assert_held(&plane->mutex);
^~~~~~~~~~~~~~~~~~~vim +/lockdep_assert_held +2337 drivers/gpu/drm/vmwgfx/vmwgfx_kms.c
2289
2290 /**
2291 * vmw_kms_helper_dirty - Helper to build commands and perform actions based
2292 * on a set of cliprects and a set of display units.
2293 *
2294 * @dev_priv: Pointer to a device private structure.
2295 * @framebuffer: Pointer to the framebuffer on which to perform the actions.
2296 * @clips: A set of struct drm_clip_rect. Either this os @vclips must be NULL.
2297 * Cliprects are given in framebuffer coordinates.
2298 * @vclips: A set of struct drm_vmw_rect cliprects. Either this or @clips must
2299 * be NULL. Cliprects are given in source coordinates.
2300 * @dest_x: X coordinate offset for the crtc / destination clip rects.
2301 * @dest_y: Y coordinate offset for the crtc / destination clip rects.
2302 * @num_clips: Number of cliprects in the @clips or @vclips array.
2303 * @increment: Integer with which to increment the clip counter when looping.
2304 * Used to skip a predetermined number of clip rects.
2305 * @dirty: Closure structure. See the description of struct vmw_kms_dirty.
2306 */
2307 int vmw_kms_helper_dirty(struct vmw_private *dev_priv,
2308 struct vmw_framebuffer *framebuffer,
2309 const struct drm_clip_rect *clips,
2310 const struct drm_vmw_rect *vclips,
2311 s32 dest_x, s32 dest_y,
2312 int num_clips,
2313 int increment,
2314 struct vmw_kms_dirty *dirty)
2315 {
2316 struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS];
2317 struct drm_crtc *crtc;
2318 u32 num_units = 0;
2319 u32 i, k;
2320
2321 dirty->dev_priv = dev_priv;
2322
2323 /* If crtc is passed, no need to iterate over other display units */
2324 if (dirty->crtc) {
2325 units[num_units++] = vmw_crtc_to_du(dirty->crtc);
2326 } else {
2327 list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list,
2328 head) {
2329 struct drm_plane *plane = crtc->primary;
2330
2331 /*
2332 * vmw_*_primary_plane_atomic_update() pass in the crtc,
2333 * and so don't end up here. All other callers use
2334 * drm_modeset_lock_all(), hence we can access the
2335 * plane state safely.
2336 */
> 2337 lockdep_assert_held(&plane->mutex);
2338
2339 if (plane->state->fb != &framebuffer->base)
2340 units[num_units++] = vmw_crtc_to_du(crtc);
2341 }
2342 }
2343
2344 for (k = 0; k < num_units; k++) {
2345 struct vmw_display_unit *unit = units[k];
2346 s32 crtc_x = unit->crtc.x;
2347 s32 crtc_y = unit->crtc.y;
2348 s32 crtc_width = unit->crtc.mode.hdisplay;
2349 s32 crtc_height = unit->crtc.mode.vdisplay;
2350 const struct drm_clip_rect *clips_ptr = clips;
2351 const struct drm_vmw_rect *vclips_ptr = vclips;
2352
2353 dirty->unit = unit;
2354 if (dirty->fifo_reserve_size > 0) {
2355 dirty->cmd = vmw_fifo_reserve(dev_priv,
2356 dirty->fifo_reserve_size);
2357 if (!dirty->cmd) {
2358 DRM_ERROR("Couldn't reserve fifo space "
2359 "for dirty blits.\n");
2360 return -ENOMEM;
2361 }
2362 memset(dirty->cmd, 0, dirty->fifo_reserve_size);
2363 }
2364 dirty->num_hits = 0;
2365 for (i = 0; i < num_clips; i++, clips_ptr += increment,
2366 vclips_ptr += increment) {
2367 s32 clip_left;
2368 s32 clip_top;
2369
2370 /*
2371 * Select clip array type. Note that integer type
2372 * in @clips is unsigned short, whereas in @vclips
2373 * it's 32-bit.
2374 */
2375 if (clips) {
2376 dirty->fb_x = (s32) clips_ptr->x1;
2377 dirty->fb_y = (s32) clips_ptr->y1;
2378 dirty->unit_x2 = (s32) clips_ptr->x2 + dest_x -
2379 crtc_x;
2380 dirty->unit_y2 = (s32) clips_ptr->y2 + dest_y -
2381 crtc_y;
2382 } else {
2383 dirty->fb_x = vclips_ptr->x;
2384 dirty->fb_y = vclips_ptr->y;
2385 dirty->unit_x2 = dirty->fb_x + vclips_ptr->w +
2386 dest_x - crtc_x;
2387 dirty->unit_y2 = dirty->fb_y + vclips_ptr->h +
2388 dest_y - crtc_y;
2389 }
2390
2391 dirty->unit_x1 = dirty->fb_x + dest_x - crtc_x;
2392 dirty->unit_y1 = dirty->fb_y + dest_y - crtc_y;
2393
2394 /* Skip this clip if it's outside the crtc region */
2395 if (dirty->unit_x1 >= crtc_width ||
2396 dirty->unit_y1 >= crtc_height ||
2397 dirty->unit_x2 <= 0 || dirty->unit_y2 <= 0)
2398 continue;
2399
2400 /* Clip right and bottom to crtc limits */
2401 dirty->unit_x2 = min_t(s32, dirty->unit_x2,
2402 crtc_width);
2403 dirty->unit_y2 = min_t(s32, dirty->unit_y2,
2404 crtc_height);
2405
2406 /* Clip left and top to crtc limits */
2407 clip_left = min_t(s32, dirty->unit_x1, 0);
2408 clip_top = min_t(s32, dirty->unit_y1, 0);
2409 dirty->unit_x1 -= clip_left;
2410 dirty->unit_y1 -= clip_top;
2411 dirty->fb_x -= clip_left;
2412 dirty->fb_y -= clip_top;
2413
2414 dirty->clip(dirty);
2415 }
2416
2417 dirty->fifo_commit(dirty);
2418 }
2419
2420 return 0;
2421 }
2422
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 4/7 drm/vmwgfx: Stop using plane->fb in vmw_kms_update_implicit_fb()
In reply to Ville SyrjalaFrom: Ville Syrjälä <[email protected]>
The only caller of vmw_kms_update_implicit_fb() is the page_flip hook which itself gets called with the plane mutex already held. Hence we can look at plane->state safely. Toss in a lockdep assert to make the situation more clear.
--- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +4 -1
@@ -2811,14 +2811,17 @@ void vmw_kms_update_implicit_fb(struct vmw_private *dev_priv, struct drm_crtc *crtc) {struct vmw_display_unit *du =vmw_crtc_to_du (crtc); +struct drm_plane *plane = crtc->primary;struct vmw_framebuffer *vfb; +lockdep_assert_held (&plane->mutex); +mutex_lock (&dev_priv->global_kms_state_mutex);if (!du->is_implicit) goto out_unlock; - vfb =vmw_framebuffer_to_vfb (crtc->primary->fb); + vfb =vmw_framebuffer_to_vfb (plane->state->fb);WARN_ON_ONCE (dev_priv->num_implicit !=1 && dev_priv->implicit_fb != vfb);
Signature · 6 lines
2.16.1 _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 4/7] drm/vmwgfx: Stop using plane->fb in vmw_kms_update_implicit_fb()
Quoted 43 lines
From: Ville Syrjälä <[email protected]>
The only caller of
vmw_kms_update_implicit_fb()is thepage_fliphook which itself gets called with the plane mutex already held. Hence we can look atplane->statesafely. Toss in a lockdep assert to make the situation more clear.Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_kms.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)drivers/gpu/drm/vmwgfx/vmwgfx_kms.c +4
-2@@ -2811,14 +2811,17 @@ void vmw_kms_update_implicit_fb(structvmw_private *dev_priv, struct drm_crtc *crtc) { struct vmw_display_unit *du = vmw_crtc_to_du(crtc); +struct drm_plane *plane = crtc->primary;struct vmw_framebuffer *vfb; +lockdep_assert_held (&plane->mutex); +mutex_lock (&dev_priv->global_kms_state_mutex);if (!du->is_implicit) goto out_unlock; - vfb =vmw_framebuffer_to_vfb (crtc->primary->fb); + vfb =vmw_framebuffer_to_vfb (plane->state->fb);WARN_ON_ONCE (dev_priv->num_implicit !=1 && dev_priv->implicit_fb != vfb); --
Quoted 2 lines
2.16.1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 5/7 drm/vmwgfx: Stop updating plane->fb
In reply to Ville SyrjalaFrom: Ville Syrjälä <[email protected]>
We want to get rid of plane->fb on atomic drivers. Stop setting it.
--- drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 2 -- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 2 -- 2 files changed, 4 deletions(-)
drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c +0 -2
@@ -525,8 +525,6 @@ vmw_sou_primary_plane_atomic_update(struct drm_plane *plane,*/ if (ret !=0 )DRM_ERROR ("Failed to update screen.\n" ); - - crtc->primary->fb = plane->state->fb; }else {/* * When disabling a plane, CRTC and FB should always be NULL
drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +0 -2
@@ -1285,8 +1285,6 @@ vmw_stdu_primary_plane_atomic_update(struct drm_plane *plane, 1, 1, NULL, crtc);if (ret)DRM_ERROR ("Failed to update STDU.\n" ); - - crtc->primary->fb = plane->state->fb; }else { crtc = old_state->crtc; stdu =vmw_crtc_to_stdu (crtc);
Signature · 6 lines
2.16.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 5/7] drm/vmwgfx: Stop updating plane->fb
This makes sense once we got rid of plane->fb
Will this go to drm-next? Could you please CC
me so that I can do some testing myself. Thanks.
Quoted 45 lines
From: Ville Syrjälä <[email protected]>
We want to get rid of
plane->fbon atomic drivers. Stop setting it.Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 2 -- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 2 -- 2 files changed, 4 deletions(-)drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c +0
-2@@ -525,8 +525,6 @@ vmw_sou_primary_plane_atomic_update(structdrm_plane *plane, */ if (ret !=0 )DRM_ERROR ("Failed to update screen.\n" ); - - crtc->primary->fb = plane->state->fb; }else {/* * When disabling a plane, CRTC and FB should always be
NULLdrivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +0
-2@@ -1285,8 +1285,6 @@ vmw_stdu_primary_plane_atomic_update(struct drm_plane *plane, 1, 1, NULL, crtc);if (ret)DRM_ERROR ("Failed to update STDU.\n" ); - - crtc->primary->fb = plane->state->fb; }else { crtc = old_state->crtc;
Quoted 3 lines
stdu =
vmw_crtc_to_stdu(crtc);
--
2.16.1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 5/7] drm/vmwgfx: Stop updating plane->fb
Quoted 3 lines · Deepak Singh Rawat
This makes sense once we got rid of
plane->fbWill this go to drm-next?
The plan is to push to drm-misc-next once we get all the ducks in a row.
Quoted 2 lines
Could you please CC
me so that I can do some testing myself. Thanks.
Here's a branch if you want a head start:git://github.com/vsyrjala/linux.git plane_fb_crtc_nuke_2
I'd definitely appreciate some testing of this stuff. Wouldn't want to break you stuff accidentally.
Quoted 52 lines
Reviewed-by Deepak Rawat <[email protected]>Quoted 48 lines
From: Ville Syrjälä <[email protected]>
We want to get rid of
plane->fbon atomic drivers. Stop setting it.Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 2 -- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 2 -- 2 files changed, 4 deletions(-)drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c +0
-2@@ -525,8 +525,6 @@ vmw_sou_primary_plane_atomic_update(structdrm_plane *plane, */ if (ret !=0 )DRM_ERROR ("Failed to update screen.\n" ); - - crtc->primary->fb = plane->state->fb; }else {/* * When disabling a plane, CRTC and FB should always be
NULLdrivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +0
-2@@ -1285,8 +1285,6 @@ vmw_stdu_primary_plane_atomic_update(struct drm_plane *plane, 1, 1, NULL, crtc);if (ret)DRM_ERROR ("Failed to update STDU.\n" ); - - crtc->primary->fb = plane->state->fb; }else { crtc = old_state->crtc;stdu =
vmw_crtc_to_stdu(crtc);
--
2.16.1
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Re: [PATCH 5/7] drm/vmwgfx: Stop updating plane->fb
Quoted 8 lines · Ville Syrjälä
Quoted 3 lines · Deepak Singh Rawat
This makes sense once we got rid of
plane->fbWill this go to drm-next?
The plan is to push to drm-misc-next once we get all the ducks in a row.
Quoted 8 lines
Quoted 2 lines
Could you please CC
me so that I can do some testing myself. Thanks.Here's a branch if you want a head start:
git://github.com/vsyrjala/linux.gitplane_fb_crtc_nuke_2I'd definitely appreciate some testing of this stuff. Wouldn't want to break you stuff accidentally.
Did we get anywhere with testing this? I'd like to land the remaining bits, but I'd feel much safer doing that if it was tested.
Quoted 61 lines
Quoted 53 lines
Reviewed-by Deepak Rawat <[email protected]>Quoted 48 lines
From: Ville Syrjälä <[email protected]>
We want to get rid of
plane->fbon atomic drivers. Stop setting it.Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 2 -- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 2 -- 2 files changed, 4 deletions(-)drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c +0
-2@@ -525,8 +525,6 @@ vmw_sou_primary_plane_atomic_update(structdrm_plane *plane, */ if (ret !=0 )DRM_ERROR ("Failed to update screen.\n" ); - - crtc->primary->fb = plane->state->fb; }else {/* * When disabling a plane, CRTC and FB should always be
NULLdrivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +0
-2@@ -1285,8 +1285,6 @@ vmw_stdu_primary_plane_atomic_update(struct drm_plane *plane, 1, 1, NULL, crtc);if (ret)DRM_ERROR ("Failed to update STDU.\n" ); - - crtc->primary->fb = plane->state->fb; }else { crtc = old_state->crtc;stdu =
vmw_crtc_to_stdu(crtc);
--
2.16.1Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 6 lines
Ville Syrjälä Intel _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 5/7] drm/vmwgfx: Stop updating plane->fb
Quoted 13 lines · Ville Syrjälä
Quoted 11 lines · Deepak Singh Rawat
Quoted 3 lines
This makes sense once we got rid of
plane->fbWill this go to drm-next?
The plan is to push to drm-misc-next once we get all the ducks in a row.
Quoted 2 lines
Could you please CC
me so that I can do some testing myself. Thanks.
Quoted 8 lines
Quoted 5 lines
Here's a branch if you want a head start:
git://github.com/vsyrjala/linux.gitplane_fb_crtc_nuke_2I'd definitely appreciate some testing of this stuff. Wouldn't want to break you stuff accidentally.
Did we get anywhere with testing this? I'd like to land the remaining bits, but I'd feel much safer doing that if it was tested.
Hi Ville,
I did some basic mode-setting testing by taking your patches to vmwgfx private branch and things seems to work fine.
Thanks,
Deepak
Quoted 64 lines
Quoted 21 lines
Quoted 21 lines
Reviewed-by Deepak Rawat <[email protected]>Quoted 15 lines
From: Ville Syrjälä <[email protected]>
We want to get rid of
plane->fbon atomic drivers. Stop setting it.Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c | 2 -- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 2 -- 2 files changed, 4 deletions(-)Quoted 6 lines
Quoted 6 lines
drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c
Quoted 6 lines
drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c +0
-0@@ -525,8 +525,6 @@vmw_sou_primary_plane_atomic_update(struct
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/vmwgfx/vmwgfx_scrn.c +0
-2drm_plane *plane, */ if (ret !=0 )DRM_ERROR ("Failed to update screen.\n" ); - - crtc->primary->fb = plane->state->fb; }else {/* Quoted 8 lines
Quoted 8 lines
drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c
Quoted 8 lines
* When disabling a plane, CRTC and FB should always be
NULLdrivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +0
-0@@ -1285,8 +1285,6 @@vmw_stdu_primary_plane_atomic_update(struct
Quoted 12 lines
Quoted 11 lines
Quoted 11 lines
drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +0
-2drm_plane *plane, 1, 1, NULL, crtc);if (ret)DRM_ERROR ("Failed to update STDU.\n" ); - - crtc->primary->fb = plane->state->fb; }else { crtc = old_state->crtc;stdu =
vmw_crtc_to_stdu(crtc);
--
2.16.1Quoted 7 lines
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
[email protected]
https://urldefense.proofpoint.com/v2/url?u=https-
Quoted 8 lines
3A__lists.freedesktop.org_mailman_listinfo_intel- 2Dgfx&d=DwIDAw&c=uilaK90D4TOVoH58JNXRgQ&r=zOOG28inJK0762SxAf- cyZdStnd2NQpRu98lJP2iYGw&m=3J7W8_yE3JhMDcN3FfZN8bWZON61wueSY YfSGxPNHVE&s=TqYFqV1NCzCnakZHMWVyJ9k42n0CUm5Kcl9xW2Cdvz4&e=
--
Ville Syrjälä
Intel
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 6/7 drm/vmwgfx: Stop using plane->fb in atomic_enable()
In reply to Ville SyrjalaFrom: Ville Syrjälä <[email protected]>
Instead of looking at the (soon to be deprecated) plane->fb we'll examing plane->state->fb instead. We can do this because vmw_du_crtc_atomic_check() prevents us from enabling a crtc without the primary plane also being enabled.
Due to that same reason, I'm actually not sure what the checks here are for NULL fb. If we can't enable the crtc without an enabled plane we should always have an fb. But I'll leave that for someone else to figure out.
--- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +2 -1
@@ -414,6 +414,7 @@ static void vmw_stdu_crtc_helper_prepare(struct drm_crtc *crtc)static void vmw_stdu_crtc_atomic_enable (struct drm_crtc *crtc,struct drm_crtc_state *old_state) { +struct drm_plane_state *plane_state = crtc->primary->state;struct vmw_private *dev_priv;struct vmw_screen_target_display_unit *stdu;struct vmw_framebuffer *vfb;
@@ -422,7 +423,7 @@ static void vmw_stdu_crtc_atomic_enable(struct drm_crtc *crtc, stdu =vmw_crtc_to_stdu (crtc); dev_priv =vmw_priv (crtc->dev); - fb = crtc->primary->fb; + fb = plane_state->fb; vfb = (fb) ?vmw_framebuffer_to_vfb (fb) :NULL ;
Signature · 6 lines
2.16.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 6/7] drm/vmwgfx: Stop using plane->fb in atomic_enable()
Quoted 8 lines
From: Ville Syrjälä <[email protected]>
Instead of looking at the (soon to be deprecated)
plane->fbwe'll examingplane->state->fbinstead. We can do this becausevmw_du_crtc_atomic_check()prevents us from enabling a crtc without the primary plane also being enabled.
Quoted 4 lines
Due to that same reason, I'm actually not sure what the checks here are for NULL fb. If we can't enable the crtc without an enabled plane we should always have an fb. But I'll leave that for someone else to figure out.
Hi Ville,
AFAIK the NULL check is set or clear the implicit framebuffer property which is specific to vmwgfx and for current hardware version is disabled. I have this future TODO work item to get rid of implicit placement property or at least make it read only.
I still don’t have complete understanding of atomic state but this patch looks good to me.
Quoted 35 lines
Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +1
-0@@ -414,6 +414,7 @@ static void vmw_stdu_crtc_helper_prepare(struct drm_crtc *crtc)static void vmw_stdu_crtc_atomic_enable (struct drm_crtc *crtc,struct drm_crtc_state *old_state) { +struct drm_plane_state *plane_state = crtc->primary->state;struct vmw_private *dev_priv;struct vmw_screen_target_display_unit *stdu;drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c +1
-2struct vmw_framebuffer *vfb;@@ -422,7 +423,7 @@ static void vmw_stdu_crtc_atomic_enable(structdrm_crtc *crtc, stdu =vmw_crtc_to_stdu (crtc); dev_priv =vmw_priv (crtc->dev); - fb = crtc->primary->fb; + fb = plane_state->fb; vfb = (fb) ?vmw_framebuffer_to_vfb (fb) :NULL ; --
Quoted 2 lines
2.16.1
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
PATCH 7/7 drm/vmwgfx: Stop messing about with plane->fb/old_fb/crtc
In reply to Ville SyrjalaFrom: Ville Syrjälä <[email protected]>
plane->fb/old_fb/crtc should no longer be used by atomic drivers. Stop messing about with them.
TODO: Squash with the core/helper patch?
--- drivers/gpu/drm/vmwgfx/vmwgfx_fb.c | 24 ------------------------ 1 file changed, 24 deletions(-)
drivers/gpu/drm/vmwgfx/vmwgfx_fb.c +0 -24
@@ -439,8 +439,6 @@ static int vmw_fb_compute_depth(struct fb_var_screeninfo *var,static int vmwgfx_set_config_internal (struct drm_mode_set *set) {struct drm_crtc *crtc = set->crtc; -struct drm_framebuffer *fb; -struct drm_crtc *tmp;struct drm_modeset_acquire_ctx *ctx;struct drm_device *dev = set->crtc->dev;int ret;
@@ -448,29 +446,7 @@ static int vmwgfx_set_config_internal(struct drm_mode_set *set) ctx = dev->mode_config.acquire_ctx; restart: -/* -* NOTE: ->set_config can also disable other crtcs (if we steal all -* connectors from it), hence we need to refcount the fbs across all -* crtcs. Atomic modeset will have saner semantics ... -*/ -drm_for_each_crtc (tmp, dev) - tmp->primary->old_fb = tmp->primary->fb; - - fb = set->fb; - ret = crtc->funcs->set_config (set, ctx); -if (ret ==0 ) { - crtc->primary->crtc = crtc; - crtc->primary->fb = fb; - } - -drm_for_each_crtc (tmp, dev) { -if (tmp->primary->fb) -drm_framebuffer_get (tmp->primary->fb); -if (tmp->primary->old_fb) -drm_framebuffer_put (tmp->primary->old_fb); - tmp->primary->old_fb =NULL ; - }if (ret == -EDEADLK ) { dev->mode_config.acquire_ctx =NULL ;
Signature · 6 lines
2.16.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [PATCH 7/7] drm/vmwgfx: Stop messing about with plane->fb/old_fb/crtc
Quoted 6 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
plane->fb/old_fb/crtc should no longer be used by atomic drivers. Stop messing about with them.
TODO: Squash with the core/helper patch?
Not possible, because the core setconfig one does no longer work with atomic drivers ever since I've thrown away the magic backoff. Since then we have the rule that for any atomic driver, you need a real atomic commit (including passing the acquire_ctx down to that very call to drm_atomic_commit).
See the patch that introduced this copypasta for full details plus how to fix it up properly:
commit 3bacf4361cd07f988a13de78d672928606df24ad
Author: Daniel Vetter <[email protected]> Date: Thu Apr 6 22:02:56 2017 +0200
drm/vmwgfx: Fix fbdev emulation using legacy functions
I've broken this by removing the backoff handling from the set_config2atomic helper in
commit 38b6441e4e75c0b319cfe4d9364c1059fc1e3c2b
Author: Daniel Vetter <[email protected]>
Date: Wed Mar 22 22:50:58 2017 +0100
drm/atomic-helper: Remove the backoff hack from set_config
Fixing this properly would mean we get to wire the acquire_ctx all the way through vmwgfx fbdev code, and doing the same was tricky for the shared fbdev layer. Probably much better to look into refactoring the entire code to use the helpers, but since that's not a viable long-term solution fix the issue by open-coding a vmwgfx version of set_config, that does the legacy backoff dance internally.
Note: Just compile-tested. The idea is to take drm_mode_set_config_internal(), remove the "is this a legacy driver" check, and whack the drm_atomic_legacy_backoff trickery at the end. Since drm_atomic_legacy_backoff is for atomic commits only we need to open-code it.
I scrolled through your vmwgfx patches, and will try to look at them maybe next week. Too complicated for this late, and tomorrow I'm ooo. -Daniel
Quoted 56 lines
Cc Thomas Hellstrom <[email protected]>Cc Sinclair Yeh <[email protected]>Cc VMware Graphics <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/vmwgfx/vmwgfx_fb.c | 24 ------------------------ 1 file changed, 24 deletions(-)drivers/gpu/drm/vmwgfx/vmwgfx_fb.c +0
-24@@ -439,8 +439,6 @@ static int vmw_fb_compute_depth(struct fb_var_screeninfo *var,static int vmwgfx_set_config_internal (struct drm_mode_set *set) {struct drm_crtc *crtc = set->crtc; -struct drm_framebuffer *fb; -struct drm_crtc *tmp;struct drm_modeset_acquire_ctx *ctx;struct drm_device *dev = set->crtc->dev;int ret;@@ -448,29 +446,7 @@ static int vmwgfx_set_config_internal(struct drm_mode_set *set) ctx = dev->mode_config.acquire_ctx; restart: -/* -* NOTE: ->set_config can also disable other crtcs (if we steal all -* connectors from it), hence we need to refcount the fbs across all -* crtcs. Atomic modeset will have saner semantics ... -*/ -drm_for_each_crtc (tmp, dev) - tmp->primary->old_fb = tmp->primary->fb; - - fb = set->fb; - ret = crtc->funcs->set_config (set, ctx); -if (ret ==0 ) { - crtc->primary->crtc = crtc; - crtc->primary->fb = fb; - } - -drm_for_each_crtc (tmp, dev) { -if (tmp->primary->fb) -drm_framebuffer_get (tmp->primary->fb); -if (tmp->primary->old_fb) -drm_framebuffer_put (tmp->primary->old_fb); - tmp->primary->old_fb =NULL ; - }if (ret == -EDEADLK ) { dev->mode_config.acquire_ctx =NULL ;Signature · 1 line
2.16.1
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for series starting with [1/7] drm/arc: Stop consulting plane->fb
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [1/7] drm/arc: Stop consulting plane->fb
URL : https://patchwork.freedesktop.org/series/41230/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip b94876325cd5 drm/arc: Stop consulting plane->fb 8c083114e1a4 drm/vmwgfx: Stop using plane->fb in vmw_kms_atomic_check_modeset() cf25abb66c8d drm/vmwgfx: Stop using plane->fb in vmw_kms_helper_dirty() -:12: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #12: concluded that the calls originating from vmw_*_primary_plane_atomic_update()
total: 0 errors, 1 warnings, 0 checks, 21 lines checked 90290f06a0cd drm/vmwgfx: Stop using plane->fb in vmw_kms_update_implicit_fb() 69073dfedd60 drm/vmwgfx: Stop updating plane->fb192117f681f1 drm/vmwgfx: Stop using plane->fb in atomic_enable() ac7ba740a34d drm/vmwgfx: Stop messing about with plane->fb/old_fb/crtc
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 10 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
We want to stop using
plane->fbwith atomic driver, so stop looking at it.I have no idea what this code is trying to achieve. There is no corresponding check in the enable path. Also since
arc_pgu_set_pxl_fmt()will anyway oops if there is no fb I'm going to assuming that I can just remove the check entirely. There seems to be a general shortage of .atomic_check() in this driver...
I think arcpgu is the perfect example of a small driver that _really_ wants to use drm_simple_display_pipe_helper. Which would address the outright lack of any and all atomic_check code (beyond basic mode validation through mode_valid).
I also just noticed that it still has a bunch of the legacy hooks set, e.g. mode_set, mode_set_base are all no longer used in atomic.
I think the code won't be able to oops, since if there's no fb, we don't enable the plane (and it happily allows that), so should be all non-oopsing. Even with this check here removed.
Ofc the hw might get pissed at us in this case, but I can't tell that. Like I said, conversion to drm_simple_display_pipe_helper is probably the way to go.
Anyway, this patch here looks good, if you adjust the commit message to explain why it can't oops:
Quoted 25 lines
Cc Alexey Brodkin <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/arc/arcpgu_crtc.c | 3 --- 1 file changed, 3 deletions(-)drivers/gpu/drm/arc/arcpgu_crtc.c +0
-3@@ -136,9 +136,6 @@ static void arc_pgu_crtc_atomic_disable(struct drm_crtc *crtc, {struct arcpgu_drm_private *arcpgu =crtc_to_arcpgu_priv (crtc); -if (!crtc->primary->fb) -return ; -clk_disable_unprepare (arcpgu->clk); arc_pgu_write(arcpgu, ARCPGU_REG_CTRL, arc_pgu_read(arcpgu, ARCPGU_REG_CTRL) &Signature · 1 line
2.16.1
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 17 lines · Daniel Vetter
Quoted 10 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
We want to stop using
plane->fbwith atomic driver, so stop looking at it.I have no idea what this code is trying to achieve. There is no corresponding check in the enable path. Also since
arc_pgu_set_pxl_fmt()will anyway oops if there is no fb I'm going to assuming that I can just remove the check entirely. There seems to be a general shortage of .atomic_check() in this driver...I think arcpgu is the perfect example of a small driver that _really_ wants to use
drm_simple_display_pipe_helper. Which would address the outright lack of any and allatomic_checkcode (beyond basic mode validation throughmode_valid).
Quoted 6 lines
I also just noticed that it still has a bunch of the legacy hooks set, e.g.
mode_set,mode_set_baseare all no longer used in atomic.I think the code won't be able to oops, since if there's no fb, we don't enable the plane (and it happily allows that), so should be all non-oopsing. Even with this check here removed.
arc_pgu_set_pxl_fmt() gets called from the .mode_set_nofb() hook which I assume doesn't care about planes at all. So to me it looks like it'll definitely oops.
Quoted 40 lines
Ofc the hw might get pissed at us in this case, but I can't tell that. Like I said, conversion to
drm_simple_display_pipe_helperis probably the way to go.Anyway, this patch here looks good, if you adjust the commit message to explain why it can't oops:
Reviewed-by Daniel Vetter <[email protected]>Quoted 25 lines
Cc Alexey Brodkin <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/arc/arcpgu_crtc.c | 3 --- 1 file changed, 3 deletions(-)drivers/gpu/drm/arc/arcpgu_crtc.c +0
-3@@ -136,9 +136,6 @@ static void arc_pgu_crtc_atomic_disable(struct drm_crtc *crtc, {struct arcpgu_drm_private *arcpgu =crtc_to_arcpgu_priv (crtc); -if (!crtc->primary->fb) -return ; -clk_disable_unprepare (arcpgu->clk); arc_pgu_write(arcpgu, ARCPGU_REG_CTRL, arc_pgu_read(arcpgu, ARCPGU_REG_CTRL) &Signature · 1 line
2.16.1Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch
Signature · 6 lines
Ville Syrjälä Intel OTC _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Daniel Vetter
Reviewed-byQuoted 21 lines · Ville Syrjälä
Quoted 20 lines · Daniel Vetter
Quoted 10 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
We want to stop using
plane->fbwith atomic driver, so stop looking at it.I have no idea what this code is trying to achieve. There is no corresponding check in the enable path. Also since
arc_pgu_set_pxl_fmt()will anyway oops if there is no fb I'm going to assuming that I can just remove the check entirely. There seems to be a general shortage of .atomic_check() in this driver...I think arcpgu is the perfect example of a small driver that _really_ wants to use
drm_simple_display_pipe_helper. Which would address the outright lack of any and allatomic_checkcode (beyond basic mode validation throughmode_valid).I also just noticed that it still has a bunch of the legacy hooks set, e.g.
mode_set,mode_set_baseare all no longer used in atomic.
Quoted 7 lines
Quoted 3 lines
I think the code won't be able to oops, since if there's no fb, we don't enable the plane (and it happily allows that), so should be all non-oopsing. Even with this check here removed.
arc_pgu_set_pxl_fmt()gets called from the .mode_set_nofb() hook which I assume doesn't care about planes at all. So to me it looks like it'll definitely oops.
Indeed, I was blind. Commit message looks good.
Quoted 45 lines
Quoted 41 lines
Ofc the hw might get pissed at us in this case, but I can't tell that. Like I said, conversion to
drm_simple_display_pipe_helperis probably the way to go.Anyway, this patch here looks good, if you adjust the commit message to explain why it can't oops:
Reviewed-by Daniel Vetter <[email protected]>Quoted 25 lines
Cc Alexey Brodkin <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>--- drivers/gpu/drm/arc/arcpgu_crtc.c | 3 --- 1 file changed, 3 deletions(-)drivers/gpu/drm/arc/arcpgu_crtc.c +0
-3@@ -136,9 +136,6 @@ static void arc_pgu_crtc_atomic_disable(struct drm_crtc *crtc, {struct arcpgu_drm_private *arcpgu =crtc_to_arcpgu_priv (crtc); -if (!crtc->primary->fb) -return ; -clk_disable_unprepare (arcpgu->clk); arc_pgu_write(arcpgu, ARCPGU_REG_CTRL, arc_pgu_read(arcpgu, ARCPGU_REG_CTRL) &Signature · 1 line
2.16.1Signature · 3 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.chSignature · 2 lines
Ville Syrjälä Intel OTC
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [1/7] drm/arc: Stop consulting plane->fb
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [1/7] drm/arc: Stop consulting plane->fb
URL : https://patchwork.freedesktop.org/series/41230/
State : success
== Summary ==
Series 41230v1 series starting with [1/7] drm/arc: Stop consulting plane->fb
https://patchwork.freedesktop.org/api/1.0/series/41230/revisions/1/mbox/
---- Known issues:
Test gem_mmap_gtt:
Subgroup basic-small-bo-tiledx:
pass -> FAIL (fi-gdg-551) fdo#102575
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
dmesg-warn -> PASS (fi-cnl-y3) fdo#104951
Test prime_vgem:
Subgroup basic-fence-flip:
fail -> PASS (fi-ilk-650) fdo#104008fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#104951 https://bugs.freedesktop.org/show_bug.cgi?id=104951
fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fi-bdw-5557u total:285 pass:264 dwarn:0 dfail:0 fail:0 skip:21 time:432s fi-bdw-gvtdvm total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:441s fi-blb-e6850 total:285 pass:220 dwarn:1 dfail:0 fail:0 skip:64 time:380s fi-bsw-n3050 total:285 pass:239 dwarn:0 dfail:0 fail:0 skip:46 time:540s fi-bwr-2160 total:285 pass:180 dwarn:0 dfail:0 fail:0 skip:105 time:297s fi-bxt-dsi total:285 pass:255 dwarn:0 dfail:0 fail:0 skip:30 time:515s fi-bxt-j4205 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:515s fi-byt-j1900 total:285 pass:250 dwarn:0 dfail:0 fail:0 skip:35 time:526s fi-byt-n2820 total:285 pass:246 dwarn:0 dfail:0 fail:0 skip:39 time:509s fi-cfl-8700k total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:410s fi-cfl-s3 total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:559s fi-cfl-u total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:509s fi-cnl-y3 total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:589s fi-elk-e7500 total:285 pass:226 dwarn:0 dfail:0 fail:0 skip:59 time:424s fi-gdg-551 total:285 pass:176 dwarn:0 dfail:0 fail:1 skip:108 time:313s fi-glk-1 total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:540s fi-glk-j4005 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:488s fi-hsw-4770 total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:404s fi-ilk-650 total:285 pass:225 dwarn:0 dfail:0 fail:0 skip:60 time:423s fi-ivb-3520m total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:474s fi-ivb-3770 total:285 pass:252 dwarn:0 dfail:0 fail:0 skip:33 time:430s fi-kbl-7500u total:285 pass:260 dwarn:1 dfail:0 fail:0 skip:24 time:471s fi-kbl-7567u total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:464s fi-kbl-r total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:508s fi-pnv-d510 total:285 pass:220 dwarn:1 dfail:0 fail:0 skip:64 time:663s fi-skl-6260u total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:442s fi-skl-6600u total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:534s fi-skl-6700k2 total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:499s fi-skl-6770hq total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:504s fi-skl-guc total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:432s fi-skl-gvtdvm total:285 pass:262 dwarn:0 dfail:0 fail:0 skip:23 time:448s fi-snb-2520m total:285 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:580s fi-snb-2600 total:285 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:408s
Blacklisted hosts:
fi-cnl-psr total:285 pass:256 dwarn:3 dfail:0 fail:0 skip:26 time:529s
fcaf73c13c14d6bfd64c4f37089bf5437fb32221 drm-tip: 2018y-04m-05d-15h-53m-18s UTC integration manifest ac7ba740a34d drm/vmwgfx: Stop messing about with plane->fb/old_fb/crtc192117f681f1 drm/vmwgfx: Stop using plane->fb in atomic_enable()69073dfedd60 drm/vmwgfx: Stop updating plane->fb90290f06a0cd drm/vmwgfx: Stop using plane->fb in vmw_kms_update_implicit_fb() cf25abb66c8d drm/vmwgfx: Stop using plane->fb in vmw_kms_helper_dirty()8c083114e1a4 drm/vmwgfx: Stop using plane->fb in vmw_kms_atomic_check_modeset() b94876325cd5 drm/arc: Stop consulting plane->fb
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8605/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.CHECKPATCH: warning for series starting with [1/7] drm/arc: Stop consulting plane->fb (rev2)
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [1/7] drm/arc: Stop consulting plane->fb (rev2)
URL : https://patchwork.freedesktop.org/series/41230/
State : warning
== Summary ==
$ dim checkpatch origin/drm-tip 72b80067880c drm/arc: Stop consulting plane->fb -:22: WARNING:BAD_SIGN_OFF: Duplicate signature #22: Reviewed-by: Daniel Vetter <[email protected]>
total: 0 errors, 1 warnings, 0 checks, 9 lines checked488cc436263f drm/vmwgfx: Stop using plane->fb in vmw_kms_atomic_check_modeset()6cdbeabec8d8 drm/vmwgfx: Stop using plane->fb in vmw_kms_helper_dirty()
-:12: WARNING:COMMIT_LOG_LONG_LINE: Possible unwrapped commit description (prefer a maximum 75 chars per line) #12:
concluded that the calls originating from vmw_*_primary_plane_atomic_update()
total: 0 errors, 1 warnings, 0 checks, 15 lines checked 416b0dd8d5bc drm/vmwgfx: Stop using plane->fb in vmw_kms_update_implicit_fb() 91ef12040af0 drm/vmwgfx: Stop updating plane->fbfbcdb617ee01 drm/vmwgfx: Stop using plane->fb in atomic_enable() d1d669671e9b drm/vmwgfx: Stop messing about with plane->fb/old_fb/crtc
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for series starting with [1/7] drm/arc: Stop consulting plane->fb (rev2)
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [1/7] drm/arc: Stop consulting plane->fb (rev2)
URL : https://patchwork.freedesktop.org/series/41230/
State : success
== Summary ==
Series 41230v2 series starting with [1/7] drm/arc: Stop consulting plane->fb
https://patchwork.freedesktop.org/api/1.0/series/41230/revisions/2/mbox/
---- Known issues:
Test gem_mmap_gtt:
Subgroup basic-small-bo-tiledx:
pass -> FAIL (fi-gdg-551) fdo#102575
Test kms_pipe_crc_basic:
Subgroup suspend-read-crc-pipe-a:
dmesg-warn -> PASS (fi-cnl-y3) fdo#104951
Test prime_vgem:
Subgroup basic-fence-flip:
fail -> PASS (fi-ilk-650) fdo#104008fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#104951 https://bugs.freedesktop.org/show_bug.cgi?id=104951
fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008
fi-bdw-5557u total:285 pass:264 dwarn:0 dfail:0 fail:0 skip:21 time:430s fi-bdw-gvtdvm total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:443s fi-blb-e6850 total:285 pass:220 dwarn:1 dfail:0 fail:0 skip:64 time:381s fi-bsw-n3050 total:285 pass:239 dwarn:0 dfail:0 fail:0 skip:46 time:539s fi-bwr-2160 total:285 pass:180 dwarn:0 dfail:0 fail:0 skip:105 time:297s fi-bxt-dsi total:285 pass:255 dwarn:0 dfail:0 fail:0 skip:30 time:520s fi-bxt-j4205 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:511s fi-byt-j1900 total:285 pass:250 dwarn:0 dfail:0 fail:0 skip:35 time:525s fi-byt-n2820 total:285 pass:246 dwarn:0 dfail:0 fail:0 skip:39 time:509s fi-cfl-8700k total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:411s fi-cfl-s3 total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:561s fi-cfl-u total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:511s fi-cnl-y3 total:285 pass:259 dwarn:0 dfail:0 fail:0 skip:26 time:580s fi-elk-e7500 total:285 pass:226 dwarn:0 dfail:0 fail:0 skip:59 time:422s fi-gdg-551 total:285 pass:176 dwarn:0 dfail:0 fail:1 skip:108 time:312s fi-glk-1 total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:543s fi-glk-j4005 total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:485s fi-hsw-4770 total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:407s fi-ilk-650 total:285 pass:225 dwarn:0 dfail:0 fail:0 skip:60 time:421s fi-ivb-3520m total:285 pass:256 dwarn:0 dfail:0 fail:0 skip:29 time:472s fi-ivb-3770 total:285 pass:252 dwarn:0 dfail:0 fail:0 skip:33 time:431s fi-kbl-7500u total:285 pass:260 dwarn:1 dfail:0 fail:0 skip:24 time:471s fi-kbl-7567u total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:465s fi-kbl-r total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:510s fi-pnv-d510 total:285 pass:220 dwarn:1 dfail:0 fail:0 skip:64 time:678s fi-skl-6260u total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:439s fi-skl-6600u total:285 pass:258 dwarn:0 dfail:0 fail:0 skip:27 time:532s fi-skl-6700k2 total:285 pass:261 dwarn:0 dfail:0 fail:0 skip:24 time:506s fi-skl-6770hq total:285 pass:265 dwarn:0 dfail:0 fail:0 skip:20 time:492s fi-skl-guc total:285 pass:257 dwarn:0 dfail:0 fail:0 skip:28 time:432s fi-skl-gvtdvm total:285 pass:262 dwarn:0 dfail:0 fail:0 skip:23 time:445s fi-snb-2520m total:285 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:564s fi-snb-2600 total:285 pass:245 dwarn:0 dfail:0 fail:0 skip:40 time:398s
Blacklisted hosts:
fi-cnl-psr total:285 pass:256 dwarn:3 dfail:0 fail:0 skip:26 time:531s
fcaf73c13c14d6bfd64c4f37089bf5437fb32221 drm-tip: 2018y-04m-05d-15h-53m-18s UTC integration manifest d1d669671e9b drm/vmwgfx: Stop messing about with plane->fb/old_fb/crtcfbcdb617ee01 drm/vmwgfx: Stop using plane->fb in atomic_enable()91ef12040af0 drm/vmwgfx: Stop updating plane->fb416b0dd8d5bc drm/vmwgfx: Stop using plane->fb in vmw_kms_update_implicit_fb() 6cdbeabec8d8 drm/vmwgfx: Stop using plane->fb in vmw_kms_helper_dirty()488cc436263f drm/vmwgfx: Stop using plane->fb in vmw_kms_atomic_check_modeset() 72b80067880c drm/arc: Stop consulting plane->fb
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8606/issues.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.IGT: success for series starting with [1/7] drm/arc: Stop consulting plane->fb
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [1/7] drm/arc: Stop consulting plane->fb
URL : https://patchwork.freedesktop.org/series/41230/
State : success
== Summary ==
---- Possible new issues:
Test kms_frontbuffer_tracking:
Subgroup fbcpsr-1p-primscrn-shrfb-msflip-blt:
fail -> SKIP (shard-snb)---- Known issues:
Test kms_flip:
Subgroup 2x-flip-vs-expired-vblank:
fail -> PASS (shard-hsw) fdo#102887
Subgroup dpms-vs-vblank-race-interruptible:
pass -> FAIL (shard-hsw) fdo#103060
Subgroup plain-flip-ts-check:
fail -> PASS (shard-hsw) fdo#100368
Test kms_setmode:
Subgroup basic:
pass -> FAIL (shard-apl) fdo#99912
Test perf:
Subgroup polling:
pass -> FAIL (shard-hsw) fdo#102252 +1fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
shard-apl total:2680 pass:1835 dwarn:1 dfail:0 fail:7 skip:836 time:12708s shard-hsw total:2680 pass:1784 dwarn:1 dfail:0 fail:3 skip:891 time:11431s shard-snb total:2680 pass:1376 dwarn:1 dfail:0 fail:4 skip:1299 time:6948s
Blacklisted hosts:
shard-kbl total:1944 pass:1407 dwarn:12 dfail:0 fail:5 skip:519 time:6332s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8605/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✗ Fi.CI.IGT: warning for series starting with [1/7] drm/arc: Stop consulting plane->fb (rev2)
In reply to Ville Syrjala== Series Details ==
== Series Details ==
Series: series starting with [1/7] drm/arc: Stop consulting plane->fb (rev2)
URL : https://patchwork.freedesktop.org/series/41230/
State : warning
== Summary ==
---- Possible new issues:
Test kms_flip:
Subgroup 2x-flip-vs-modeset:
pass -> DMESG-WARN (shard-hsw)
Test kms_frontbuffer_tracking:
Subgroup fbcpsr-1p-primscrn-shrfb-msflip-blt:
fail -> SKIP (shard-snb)---- Known issues:
Test kms_flip:
Subgroup 2x-flip-vs-expired-vblank:
fail -> PASS (shard-hsw) fdo#102887 +1
Subgroup 2x-plain-flip-ts-check:
pass -> FAIL (shard-hsw) fdo#100368 +1
Subgroup modeset-vs-vblank-race:
pass -> FAIL (shard-hsw) fdo#103060
Test kms_setmode:
Subgroup basic:
pass -> FAIL (shard-apl) fdo#99912
Test perf:
Subgroup blocking:
fail -> PASS (shard-hsw) fdo#102252fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
shard-apl total:2680 pass:1835 dwarn:1 dfail:0 fail:7 skip:836 time:12652s shard-hsw total:2680 pass:1783 dwarn:2 dfail:0 fail:3 skip:891 time:11339s shard-snb total:2680 pass:1375 dwarn:1 dfail:0 fail:5 skip:1299 time:6880s
Blacklisted hosts:
shard-kbl total:1945 pass:1424 dwarn:1 dfail:0 fail:3 skip:516 time:6732s
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_8606/shards.html
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: ✗ Fi.CI.IGT: warning for series starting with [1/7] drm/arc: Stop consulting plane->fb (rev2)
HI,
Quoted 48 lines
-----Original Message-----
From: Intel-gfx [mailto:[email protected]] On Behalf Of Patchwork
Sent: perjantai 6. huhtikuuta 2018 1.51
To: Ville Syrjala <[email protected]>
Cc: [email protected]
Subject: [Intel-gfx] ✗ Fi.CI.IGT: warning for series starting with [1/7] drm/arc:
Stop consultingplane->fb(rev2)== Series Details ==
Series: series starting with [1/7] drm/arc: Stop consulting
plane->fb(rev2)
URL : https://patchwork.freedesktop.org/series/41230/
State : warning== Summary ==
---- Possible new issues:
Test
kms_flip:Subgroup 2x-flip-vs-modeset: pass -> DMESG-WARN (shard-hsw) Test kms_frontbuffer_tracking: Subgroup fbcpsr-1p-primscrn-shrfb-msflip-blt: fail -> SKIP (shard-snb)---- Known issues:
Test
kms_flip:Subgroup 2x-flip-vs-expired-vblank: fail -> PASS (shard-hsw) fdo#102887 +1 Subgroup 2x-plain-flip-ts-check: pass -> FAIL (shard-hsw) fdo#100368 +1 Subgroup modeset-vs-vblank-race: pass -> FAIL (shard-hsw) fdo#103060 Test kms_setmode: Subgroup basic: pass -> FAIL (shard-apl) fdo#99912 Test perf: Subgroup blocking: fail -> PASS (shard-hsw) fdo#102252fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#102252 https://bugs.freedesktop.org/show_bug.cgi?id=102252
Quoted 9 lines
shard-apl total:2680 pass:1835 dwarn:1 dfail:0 fail:7 skip:836
time:12652s
shard-hsw total:2680 pass:1783 dwarn:2 dfail:0 fail:3 skip:891
time:11339s
shard-snb total:2680 pass:1375 dwarn:1 dfail:0 fail:5 skip:1299
time:6880s
Blacklisted hosts:
shard-kbl total:1945 pass:1424 dwarn:1 dfail:0 fail:3 skip:516
time:6732s
For some reason not totally success run for kbl.
Execution stops on 0.00 igt@pm_rpm@system-suspend-execbuf incomplete
Tomi, Ville, any idea?
Quoted 9 lines
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-
tip/Patchwork_8606/shards.html
_______________________________________________
Intel-gfx mailing list [email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Hi Ville,
Quoted 11 lines · Ville Syrjala
From: Ville Syrjälä <[email protected]>
We want to stop using
plane->fbwith atomic driver, so stop looking at it.I have no idea what this code is trying to achieve. There is no corresponding check in the enable path. Also since
arc_pgu_set_pxl_fmt()will anyway oops if there is no fb I'm going to assuming that I can just remove the check entirely. There seems to be a general shortage of .atomic_check() in this driver...
Quoted 3 lines
Cc Alexey Brodkin <[email protected]>Cc Daniel Vetter <[email protected]>Signed-off-by Ville Syrjälä <[email protected]>
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx