target/riscv: Expose "priv" register for GDB
v3 cover target/riscv: Expose "priv" register for GDB
The third patch in this series makes the priv virtual register writitable. I'm not entirely sure this is a good idea, so I split it out into its own patch. In particular, this change will conflict with the hypervisor extension work which assumes that the privilege mode does not change in unexpected cases.
As pointed out in a previous version of this series, GDB actually contains some support already for the accessing the privilege mode via a virtual "priv" register, including to convert the values into human readable forms:
(gdb) info reg priv
priv 0x3 prv:3 [Machine]
Changlog V3:
- Break patch into series
- Make priv a virtual register
Changelog V2:
- Use PRV_H and PRV_S instead of integer literals
Jonathan Behrens (3)
target/riscv: Tell gdbstub the correct number of CSRs target/riscv: Expose priv register for GDB for reads target/riscv: Make the priv register writable by GDB
configure | 4 ++-- gdb-xml/riscv-32bit-virtual.xml | 11 +++++++++++ gdb-xml/riscv-64bit-virtual.xml | 11 +++++++++++ target/riscv/gdbstub.c | 36 ++++++++++++++++++++++++++++++++++-- 4 files changed, 58 insertions(+), 4 deletions(-)
PATCH v3 1/3 target/riscv: Tell gdbstub the correct number of CSRs
If the number of registers reported to the gdbstub code does not match the number in the associated XML file, then the register numbers used by the stub may get out of sync with a remote GDB instance.
--- target/riscv/gdbstub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
target/riscv/gdbstub.c +2 -2
@@ -384,7 +384,7 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) }gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr, -4096 ,"riscv-32bit-csr.xml" ,0 ); +240 ,"riscv-32bit-csr.xml" ,0 );#elif defined(TARGET_RISCV64 )if (env->misa &RVF ) { gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,
@@ -392,6 +392,6 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) }gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr, -4096 ,"riscv-64bit-csr.xml" ,0 ); +240 ,"riscv-64bit-csr.xml" ,0 );#endif }
Signature · 1 line
2.23.0
Re: [PATCH v3 1/3] target/riscv: Tell gdbstub the correct number of CSRs
Quoted 4 lines · Jonathan Behrens
If the number of registers reported to the gdbstub code does not match the number in the associated XML file, then the register numbers used by the stub may get out of sync with a remote GDB instance.
I am not sure how to trigger the out of sync issue. Do you know how?
Quoted 20 lines
Signed-off-by Jonathan Behrens <[email protected]>--- target/riscv/gdbstub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)target/riscv/gdbstub.c +1
-1@@ -384,7 +384,7 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) }gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr, -4096 ,"riscv-32bit-csr.xml" ,0 ); +240 ,"riscv-32bit-csr.xml" ,0 );#elif defined(TARGET_RISCV64 )if (env->misa &RVF ) { gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,
target/riscv/gdbstub.c void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) · line 397
Quoted 7 lines
target/riscv/gdbstub.c +1
-1@@ -392,6 +392,6 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) }gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr, -4096 ,"riscv-64bit-csr.xml" ,0 ); +240 ,"riscv-64bit-csr.xml" ,0 );#endif }
The change looks good to me.
Re: [PATCH v3 1/3] target/riscv: Tell gdbstub the correct number of CSRs
Quoted 8 lines · Bin Meng
Quoted 4 lines · Jonathan Behrens
If the number of registers reported to the gdbstub code does not match the number in the associated XML file, then the register numbers used by the stub may get out of sync with a remote GDB instance.
I am not sure how to trigger the out of sync issue. Do you know how?
Try applying the next patch in the series without this one. Attempting to access the priv register will return E14 because GDB will think that priv has register number 309 (since the last register with an assigned regnum is fcsr=68 and then none of the 240 CSRs have assigned numbers) while the GDB stub will think that the number is 4165 (=33 + 36 + 4096).
Re: [PATCH v3 1/3] target/riscv: Tell gdbstub the correct number of CSRs
In reply to Jonathan BehrensQuoted 6 lines · Jonathan Behrens
If the number of registers reported to the gdbstub code does not match the number in the associated XML file, then the register numbers used by the stub may get out of sync with a remote GDB instance.
Signed-off-by Jonathan Behrens <[email protected]>
Alistair
Quoted 28 lines
--- target/riscv/gdbstub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)target/riscv/gdbstub.c +2
-3@@ -384,7 +384,7 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) }gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr, -4096 ,"riscv-32bit-csr.xml" ,0 ); +240 ,"riscv-32bit-csr.xml" ,0 );#elif defined(TARGET_RISCV64 )if (env->misa &RVF ) { gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,@@ -392,6 +392,6 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) }gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr, -4096 ,"riscv-64bit-csr.xml" ,0 ); +240 ,"riscv-64bit-csr.xml" ,0 );#endif } --2.23.0
PATCH v3 2/3 target/riscv: Expose priv register for GDB for reads
In reply to Jonathan BehrensThis patch enables a debugger to read the current privilege level via a virtual "priv" register. When compiled with CONFIG_USER_ONLY the register is still visible but always reports the value zero.
--- configure | 4 ++-- gdb-xml/riscv-32bit-virtual.xml | 11 +++++++++++ gdb-xml/riscv-64bit-virtual.xml | 11 +++++++++++ target/riscv/gdbstub.c | 23 +++++++++++++++++++++++ 4 files changed, 47 insertions(+), 2 deletions(-) create mode 100644 gdb-xml/riscv-32bit-virtual.xml create mode 100644 gdb-xml/riscv-64bit-virtual.xml
configure +2 -2
@@ -7520,13 +7520,13 @@ case "$target_name" in TARGET_BASE_ARCH=riscv TARGET_ABI_DIR=riscv mttcg=yes - gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml" + gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml riscv-32bit-virtual.xml" ;; riscv64) TARGET_BASE_ARCH=riscv TARGET_ABI_DIR=riscv mttcg=yes - gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml" + gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml riscv-64bit-virtual.xml" ;; sh4|sh4eb) TARGET_ARCH=sh4
gdb-xml/riscv-32bit-virtual.xml new file +11 -0
@@ -0,0 +1,11 @@ +<?xml version="1.0"?> +<!-- Copyright (C) 2018-2019 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, + are permitted in any medium without royalty provided the copyright + notice and this notice are preserved. --> + +<!DOCTYPE feature SYSTEM "gdb-target.dtd"> +<feature name="org.gnu.gdb.riscv.virtual"> + <reg name="priv" bitsize="32"/> +</feature>
gdb-xml/riscv-64bit-virtual.xml new file +11 -0
@@ -0,0 +1,11 @@ +<?xml version="1.0"?> +<!-- Copyright (C) 2018-2019 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, + are permitted in any medium without royalty provided the copyright + notice and this notice are preserved. --> + +<!DOCTYPE feature SYSTEM "gdb-target.dtd"> +<feature name="org.gnu.gdb.riscv.virtual"> + <reg name="priv" bitsize="64"/> +</feature>
target/riscv/gdbstub.c +23 -0
@@ -373,6 +373,23 @@ static int riscv_gdb_set_csr(CPURISCVState *env, uint8_t *mem_buf, int n)return 0 ; } +static int riscv_gdb_get_virtual (CPURISCVState *cs,uint8_t *mem_buf,int n) +{ +if (n ==0 ) { +#ifdef CONFIG_USER_ONLY +return gdb_get_regl (mem_buf,0 ); +#else +return gdb_get_regl (mem_buf, cs->priv); +#endif + } +return 0 ; +} + +static int riscv_gdb_set_virtual (CPURISCVState *cs,uint8_t *mem_buf,int n) +{ +return 0 ; +} +void riscv_cpu_register_gdb_regs_for_features (CPUState *cs) {RISCVCPU *cpu =RISCV_CPU (cs);
@@ -385,6 +402,9 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs)gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr,240 ,"riscv-32bit-csr.xml" ,0 ); + +gdb_register_coprocessor (cs, riscv_gdb_get_virtual, riscv_gdb_set_virtual, +1 ,"riscv-32bit-csr.xml" ,0 );#elif defined(TARGET_RISCV64 )if (env->misa &RVF ) { gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,
@@ -393,5 +413,8 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs)gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr,240 ,"riscv-64bit-csr.xml" ,0 ); + +gdb_register_coprocessor (cs, riscv_gdb_get_virtual, riscv_gdb_set_virtual, +1 ,"riscv-64bit-virtual.xml" ,0 );#endif }
Signature · 1 line
2.23.0
Re: [PATCH v3 2/3] target/riscv: Expose priv register for GDB for reads
Quoted 98 lines · Jonathan Behrens
This patch enables a debugger to read the current privilege level via a virtual "priv" register. When compiled with
CONFIG_USER_ONLYthe register is still visible but always reports the value zero.Signed-off-by Jonathan Behrens <[email protected]>--- configure | 4 ++-- gdb-xml/riscv-32bit-virtual.xml | 11 +++++++++++ gdb-xml/riscv-64bit-virtual.xml | 11 +++++++++++ target/riscv/gdbstub.c | 23 +++++++++++++++++++++++ 4 files changed, 47 insertions(+), 2 deletions(-) create mode 100644 gdb-xml/riscv-32bit-virtual.xml create mode 100644 gdb-xml/riscv-64bit-virtual.xmlconfigure +2
-2@@ -7520,13 +7520,13 @@ case "$target_name" in TARGET_BASE_ARCH=riscv TARGET_ABI_DIR=riscv mttcg=yes - gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml" + gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml riscv-32bit-virtual.xml" ;; riscv64) TARGET_BASE_ARCH=riscv TARGET_ABI_DIR=riscv mttcg=yes - gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml" + gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml riscv-64bit-virtual.xml" ;; sh4|sh4eb) TARGET_ARCH=sh4gdb-xml/riscv-32bit-virtual.xml new file +11
-0@@ -0,0 +1,11 @@ +<?xml version="1.0"?> +<!-- Copyright (C) 2018-2019 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, + are permitted in any medium without royalty provided the copyright + notice and this notice are preserved. --> + +<!DOCTYPE feature SYSTEM "gdb-target.dtd"> +<feature name="org.gnu.gdb.riscv.virtual"> + <reg name="priv" bitsize="32"/> +</feature>gdb-xml/riscv-64bit-virtual.xml new file +11
-0@@ -0,0 +1,11 @@ +<?xml version="1.0"?> +<!-- Copyright (C) 2018-2019 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, + are permitted in any medium without royalty provided the copyright + notice and this notice are preserved. --> + +<!DOCTYPE feature SYSTEM "gdb-target.dtd"> +<feature name="org.gnu.gdb.riscv.virtual"> + <reg name="priv" bitsize="64"/> +</feature>target/riscv/gdbstub.c +17
-0@@ -373,6 +373,23 @@ static int riscv_gdb_set_csr(CPURISCVState *env, uint8_t *mem_buf, int n)return 0 ; } +static int riscv_gdb_get_virtual (CPURISCVState *cs,uint8_t *mem_buf,int n) +{ +if (n ==0 ) { +#ifdef CONFIG_USER_ONLY +return gdb_get_regl (mem_buf,0 ); +#else +return gdb_get_regl (mem_buf, cs->priv); +#endif + } +return 0 ; +} + +static int riscv_gdb_set_virtual (CPURISCVState *cs,uint8_t *mem_buf,int n) +{ +return 0 ; +} +void riscv_cpu_register_gdb_regs_for_features (CPUState *cs) {RISCVCPU *cpu =RISCV_CPU (cs);
target/riscv/gdbstub.c void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) · line 407
Quoted 6 lines
target/riscv/gdbstub.c +3
-0@@ -385,6 +402,9 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs)gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr,240 ,"riscv-32bit-csr.xml" ,0 ); + +gdb_register_coprocessor (cs, riscv_gdb_get_virtual, riscv_gdb_set_virtual, +1 ,"riscv-32bit-csr.xml" ,0 );
This should be riscv-32bit-virtual.xml
target/riscv/gdbstub.c void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) · line 420
Quoted 12 lines
target/riscv/gdbstub.c +3
-0#elif defined(TARGET_RISCV64 )if (env->misa &RVF ) { gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,@@ -393,5 +413,8 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs)gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr,240 ,"riscv-64bit-csr.xml" ,0 ); + +gdb_register_coprocessor (cs, riscv_gdb_get_virtual, riscv_gdb_set_virtual, +1 ,"riscv-64bit-virtual.xml" ,0 );#endif }
Regards,
Bin
Re: [PATCH v3 2/3] target/riscv: Expose priv register for GDB for reads
Quoted 101 lines · Bin Meng
Quoted 99 lines · Jonathan Behrens
This patch enables a debugger to read the current privilege level via a virtual "priv" register. When compiled with
CONFIG_USER_ONLYthe register is still visible but always reports the value zero.Signed-off-by Jonathan Behrens <[email protected]>--- configure | 4 ++-- gdb-xml/riscv-32bit-virtual.xml | 11 +++++++++++ gdb-xml/riscv-64bit-virtual.xml | 11 +++++++++++ target/riscv/gdbstub.c | 23 +++++++++++++++++++++++ 4 files changed, 47 insertions(+), 2 deletions(-) create mode 100644 gdb-xml/riscv-32bit-virtual.xml create mode 100644 gdb-xml/riscv-64bit-virtual.xmlconfigure +2
-2@@ -7520,13 +7520,13 @@ case "$target_name" in TARGET_BASE_ARCH=riscv TARGET_ABI_DIR=riscv mttcg=yes - gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml" + gdb_xml_files="riscv-32bit-cpu.xml riscv-32bit-fpu.xml riscv-32bit-csr.xml riscv-32bit-virtual.xml" ;; riscv64) TARGET_BASE_ARCH=riscv TARGET_ABI_DIR=riscv mttcg=yes - gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml" + gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml riscv-64bit-csr.xml riscv-64bit-virtual.xml" ;; sh4|sh4eb) TARGET_ARCH=sh4gdb-xml/riscv-32bit-virtual.xml new file +11
-0@@ -0,0 +1,11 @@ +<?xml version="1.0"?> +<!-- Copyright (C) 2018-2019 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, + are permitted in any medium without royalty provided the copyright + notice and this notice are preserved. --> + +<!DOCTYPE feature SYSTEM "gdb-target.dtd"> +<feature name="org.gnu.gdb.riscv.virtual"> + <reg name="priv" bitsize="32"/> +</feature>gdb-xml/riscv-64bit-virtual.xml new file +11
-0@@ -0,0 +1,11 @@ +<?xml version="1.0"?> +<!-- Copyright (C) 2018-2019 Free Software Foundation, Inc. + + Copying and distribution of this file, with or without modification, + are permitted in any medium without royalty provided the copyright + notice and this notice are preserved. --> + +<!DOCTYPE feature SYSTEM "gdb-target.dtd"> +<feature name="org.gnu.gdb.riscv.virtual"> + <reg name="priv" bitsize="64"/> +</feature>target/riscv/gdbstub.c +17
-0@@ -373,6 +373,23 @@ static int riscv_gdb_set_csr(CPURISCVState *env, uint8_t *mem_buf, int n)return 0 ; } +static int riscv_gdb_get_virtual (CPURISCVState *cs,uint8_t *mem_buf,int n) +{ +if (n ==0 ) { +#ifdef CONFIG_USER_ONLY +return gdb_get_regl (mem_buf,0 ); +#else +return gdb_get_regl (mem_buf, cs->priv); +#endif + } +return 0 ; +} + +static int riscv_gdb_set_virtual (CPURISCVState *cs,uint8_t *mem_buf,int n) +{ +return 0 ; +} +void riscv_cpu_register_gdb_regs_for_features (CPUState *cs) {RISCVCPU *cpu =RISCV_CPU (cs);@@ -385,6 +402,9 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs)
Quoted 7 lines
target/riscv/gdbstub.c void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) · line 407
Quoted 5 lines
target/riscv/gdbstub.c +3
-0gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr,240 ,"riscv-32bit-csr.xml" ,0 ); + +gdb_register_coprocessor (cs, riscv_gdb_get_virtual, riscv_gdb_set_virtual, +1 ,"riscv-32bit-csr.xml" ,0 );This should be riscv-32bit-virtual.xml
Good catch. I'll fix this in the next version.
Quoted 17 lines
target/riscv/gdbstub.c void riscv_cpu_register_gdb_regs_for_features(CPUState *cs) · line 420
Quoted 13 lines
target/riscv/gdbstub.c +3
-0#elif defined(TARGET_RISCV64 )if (env->misa &RVF ) { gdb_register_coprocessor(cs, riscv_gdb_get_fpu, riscv_gdb_set_fpu,@@ -393,5 +413,8 @@ void riscv_cpu_register_gdb_regs_for_features(CPUState *cs)gdb_register_coprocessor (cs, riscv_gdb_get_csr, riscv_gdb_set_csr,240 ,"riscv-64bit-csr.xml" ,0 ); + +gdb_register_coprocessor (cs, riscv_gdb_get_virtual, riscv_gdb_set_virtual, +1 ,"riscv-64bit-virtual.xml" ,0 );#endif }Regards,
Bin
PATCH v3 3/3 target/riscv: Make the priv register writable by GDB
In reply to Jonathan BehrensCurrently only PRV_U, PRV_S and PRV_M are supported, so this patch ensures that the privilege mode is set to one of them. Once support for the H-extension is added, this code will also need to properly update the virtualization status when switching between VU/VS-modes and M-mode.
--- target/riscv/gdbstub.c | 9 +++++++++ 1 file changed, 9 insertions(+)
target/riscv/gdbstub.c +9 -0
@@ -387,6 +387,15 @@ static int riscv_gdb_get_virtual(CPURISCVState *cs, uint8_t *mem_buf, int n)static int riscv_gdb_set_virtual (CPURISCVState *cs,uint8_t *mem_buf,int n) { +if (n ==0 ) { +#ifndef CONFIG_USER_ONLY + cs->priv =ldtul_p (mem_buf) &0x3 ; +if (cs->priv ==PRV_H ) { + cs->priv =PRV_S ; + } +#endif +return sizeof (target_ulong); + }return 0 ; }
Signature · 1 line
2.23.0
Re: [PATCH v3 3/3] target/riscv: Make the priv register writable by GDB
Quoted 11 lines · Jonathan Behrens
Currently only
PRV_U,PRV_SandPRV_Mare supported, so this patch ensures that the privilege mode is set to one of them. Once support for the H-extension is added, this code will also need to properly update the virtualization status when switching between VU/VS-modes and M-mode.Signed-off-by Jonathan Behrens <[email protected]>--- target/riscv/gdbstub.c | 9 +++++++++ 1 file changed, 9 insertions(+)
Re: [PATCH v3 3/3] target/riscv: Make the priv register writable by GDB
In reply to Jonathan BehrensQuoted 7 lines · Jonathan Behrens
Currently only
PRV_U,PRV_SandPRV_Mare supported, so this patch ensures that the privilege mode is set to one of them. Once support for the H-extension is added, this code will also need to properly update the virtualization status when switching between VU/VS-modes and M-mode.Signed-off-by Jonathan Behrens <[email protected]>
Alistair
Quoted 27 lines
--- target/riscv/gdbstub.c | 9 +++++++++ 1 file changed, 9 insertions(+)target/riscv/gdbstub.c +9
-1@@ -387,6 +387,15 @@ static int riscv_gdb_get_virtual(CPURISCVState *cs, uint8_t *mem_buf, int n)static int riscv_gdb_set_virtual (CPURISCVState *cs,uint8_t *mem_buf,int n) { +if (n ==0 ) { +#ifndef CONFIG_USER_ONLY + cs->priv =ldtul_p (mem_buf) &0x3 ; +if (cs->priv ==PRV_H ) { + cs->priv =PRV_S ; + } +#endif +return sizeof (target_ulong); + }return 0 ; } --2.23.0
The first paragraph seems to have gone missing. Repeated below:
Quoted 3 lines
This series adds a new "priv" virtual register that reports the current privilege mode. This is helpful for debugging purposes because that information is not actually available in any of the real CSRs.
Quoted 32 lines · Jonathan Behrens
The third patch in this series makes the priv virtual register writitable. I'm not entirely sure this is a good idea, so I split it out into its own patch. In particular, this change will conflict with the hypervisor extension work which assumes that the privilege mode does not change in unexpected cases.
As pointed out in a previous version of this series, GDB actually contains some support already for the accessing the privilege mode via a virtual "priv" register, including to convert the values into human readable forms:
(gdb) info reg priv
priv0x3prv:3 [Machine]Changlog V3:
- Break patch into series
- Make priv a virtual registerChangelog V2:
- UsePRV_HandPRV_Sinstead of integer literalsJonathan Behrens (3)
target/riscv: Tell gdbstub the correct number of CSRs target/riscv: Expose priv register for GDB for reads target/riscv: Make the priv register writable by GDBconfigure | 4 ++-- gdb-xml/riscv-32bit-virtual.xml | 11 +++++++++++ gdb-xml/riscv-64bit-virtual.xml | 11 +++++++++++ target/riscv/gdbstub.c | 36 ++++++++++++++++++++++++++++++++++-- 4 files changed, 58 insertions(+), 4 deletions(-)