backlight: gpio: simplify the driver
Subsystems (3)
v7 cover backlight: gpio: simplify the driver
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
First two patches contain minor fixes. Third patch makes the driver explicitly drive the GPIO line. Fourth patch adds all necessary data structures to ecovec24. Patch 5/9 unifies much of the code for both pdata and non-pdata cases. Patches 6-7/9 remove unused platform data fields. Last two patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
I don't have access to this HW but hopefully this works. Only compile tested.
[1] https://lkml.org/lkml/2019/6/25/900
v1 -> v2:
- rebased on top of v5.3-rc1 and adjusted to the recent changes from Andy
- added additional two patches with minor improvements
v2 -> v3:
- in patch 7/7: used initializers to set values for pdata and dev local vars
v3 -> v4:
- rebased on top of v5.4-rc1
- removed changes that are no longer relevant after commit ec665b756e6f ("backlight: gpio-backlight: Correct initial power state handling")
- added patch 7/7
v4 -> v5:
- in patch 7/7: added a comment replacing the name of the function being pulled into probe()
v5 -> v6:
- added a patch making the driver explicitly set the direction of the GPIO to output
- added a patch removing a redundant newline
v6 -> v7:
- renamed the function calculating the new GPIO value for status update
- collected more tags
Bartosz Golaszewski (9):
backlight: gpio: remove unneeded include
backlight: gpio: remove stray newline
backlight: gpio: explicitly set the direction of the GPIO
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: simplify the platform data handling
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: remove unused fields from platform data
backlight: gpio: use a helper variable for &pdev->dev
backlight: gpio: pull gpio_backlight_initial_power_state() into probe
arch/sh/boards/mach-ecovec24/setup.c | 33 +++-- drivers/video/backlight/gpio_backlight.c | 128 +++++++------------ include/linux/platform_data/gpio_backlight.h | 3 - 3 files changed, 69 insertions(+), 95 deletions(-)
Signature · 1 line
2.23.0
PATCH v7 1/9 backlight: gpio: remove unneeded include
From: Bartosz Golaszewski <[email protected]>
We no longer use any symbols from of_gpio.h. Remove this include.
--- drivers/video/backlight/gpio_backlight.c | 1 - 1 file changed, 1 deletion(-)
drivers/video/backlight/gpio_backlight.c +0 -1
@@ -12,7 +12,6 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_gpio.h> #include <linux/platform_data/gpio_backlight.h> #include <linux/platform_device.h> #include <linux/property.h>
Signature · 1 line
2.23.0
PATCH v7 2/9 backlight: gpio: remove stray newline
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Remove a double newline from the driver.
--- drivers/video/backlight/gpio_backlight.c | 1 - 1 file changed, 1 deletion(-)
drivers/video/backlight/gpio_backlight.c +0 -1
@@ -91,7 +91,6 @@ static int gpio_backlight_initial_power_state(struct gpio_backlight *gbl)return FB_BLANK_UNBLANK ; } -static int gpio_backlight_probe (struct platform_device *pdev) { struct gpio_backlight_platform_data *pdata =
Signature · 1 line
2.23.0
PATCH v7 3/9 backlight: gpio: explicitly set the direction of the GPIO
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
The GPIO backlight driver currently requests the line 'as is', without acively setting its direction. This can lead to problems: if the line is in input mode by default, we won't be able to drive it later when updating the status and also reading its initial value doesn't make sense for backlight setting.
Request the line 'as is' initially, so that we can read its value without affecting it but then change the direction to output explicitly when setting the initial brightness.
Also: check the current direction and only read the value if it's output.
--- drivers/video/backlight/gpio_backlight.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-)
drivers/video/backlight/gpio_backlight.c +18 -5
@@ -25,9 +25,8 @@ struct gpio_backlight {int def_value; }; -static int gpio_backlight_update_status (struct backlight_device *bl) +static int gpio_backlight_get_next_brightness (struct backlight_device *bl) { -struct gpio_backlight *gbl =bl_get_data (bl);int brightness = bl->props.brightness; if (bl->props.power != FB_BLANK_UNBLANK ||
@@ -35,6 +34,14 @@ static int gpio_backlight_update_status(struct backlight_device *bl) bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) brightness =0 ; +return brightness; +} + +static int gpio_backlight_update_status (struct backlight_device *bl) +{ +struct gpio_backlight *gbl =bl_get_data (bl); +int brightness =gpio_backlight_get_next_brightness (bl); +gpiod_set_value_cansleep (gbl->gpiod, brightness);return 0 ;
@@ -85,7 +92,8 @@ static int gpio_backlight_initial_power_state(struct gpio_backlight *gbl)return gbl->def_value ?FB_BLANK_UNBLANK :FB_BLANK_POWERDOWN ;/* if the enable GPIO is disabled, do not enable the backlight */ -if (gpiod_get_value_cansleep (gbl->gpiod) ==0 ) +if (gpiod_get_direction (gbl->gpiod) ==0 && +gpiod_get_value_cansleep (gbl->gpiod) ==0 )return FB_BLANK_POWERDOWN ;return FB_BLANK_UNBLANK ;
@@ -98,7 +106,7 @@ static int gpio_backlight_probe(struct platform_device *pdev)struct backlight_properties props;struct backlight_device *bl;struct gpio_backlight *gbl; -int ret; +int ret, init_brightness; gbl =devm_kzalloc (&pdev->dev,sizeof (*gbl),GFP_KERNEL );if (gbl ==NULL )
@@ -151,7 +159,12 @@ static int gpio_backlight_probe(struct platform_device *pdev) bl->props.power =gpio_backlight_initial_power_state (gbl); bl->props.brightness =1 ; -backlight_update_status (bl); + init_brightness =gpio_backlight_get_next_brightness (bl); + ret =gpiod_direction_output (gbl->gpiod, init_brightness); +if (ret) { +dev_err (&pdev->dev,"failed to set initial brightness\n" ); +return ret; + }platform_set_drvdata (pdev, bl);return 0 ;
Signature · 1 line
2.23.0
PATCH v7 4/9 sh: ecovec24: add additional properties to the backlight device
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Add a GPIO lookup entry and a device property for GPIO backlight to the board file. Tie them to the platform device which is now registered using platform_device_register_full() because of the properties. These changes are inactive now but will be used once the gpio backlight driver is modified.
--- arch/sh/boards/mach-ecovec24/setup.c | 30 +++++++++++++++++++++++----- 1 file changed, 25 insertions(+), 5 deletions(-)
arch/sh/boards/mach-ecovec24/setup.c +25 -5
@@ -371,6 +371,19 @@ static struct platform_device lcdc_device = { }, }; +static struct gpiod_lookup_table gpio_backlight_lookup = { + .dev_id ="gpio-backlight.0" , + .table = { +GPIO_LOOKUP ("sh7724_pfc" ,GPIO_PTR1 ,NULL ,GPIO_ACTIVE_HIGH ), + { } + }, +}; + +static struct property_entry gpio_backlight_props[] = { +PROPERTY_ENTRY_BOOL ("default-on" ), + { } +}; +static struct gpio_backlight_platform_data gpio_backlight_data = { .fbdev = &lcdc_device.dev, .gpio =GPIO_PTR1 ,
@@ -378,13 +391,15 @@ static struct gpio_backlight_platform_data gpio_backlight_data = { .name = "backlight", }; -static struct platform_device gpio_backlight_device = { +static const struct platform_device_info gpio_backlight_device_info = { .name ="gpio-backlight" , - .dev = { - .platform_data = &gpio_backlight_data, - }, + .data = &gpio_backlight_data, + .size_data =sizeof (gpio_backlight_data), + .properties = gpio_backlight_props, }; +static struct platform_device *gpio_backlight_device; +/* CEU0 */ static struct ceu_platform_data ceu0_pdata = { .num_subdevs =2 ,
@@ -1006,7 +1021,6 @@ static struct platform_device *ecovec_devices[] __initdata = { &usb1_common_device, &usbhs_device, &lcdc_device, - &gpio_backlight_device, &keysc_device, &cn12_power, #if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
@@ -1462,6 +1476,12 @@ static int __init arch_setup(void)#endif #endif +gpiod_add_lookup_table (&gpio_backlight_lookup); + gpio_backlight_device =platform_device_register_full ( + &gpio_backlight_device_info); +if (IS_ERR (gpio_backlight_device)) +return PTR_ERR (gpio_backlight_device); +return platform_add_devices (ecovec_devices,ARRAY_SIZE (ecovec_devices)); }
Signature · 1 line
2.23.0
PATCH v7 5/9 backlight: gpio: simplify the platform data handling
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Now that the last user of platform data (sh ecovec24) defines a proper GPIO lookup and sets the 'default-on' device property, we can drop the platform_data-specific GPIO handling and unify a big chunk of code.
The only field used from the platform data is now the fbdev pointer.
--- drivers/video/backlight/gpio_backlight.c | 62 +++++------------------- 1 file changed, 11 insertions(+), 51 deletions(-)
drivers/video/backlight/gpio_backlight.c +11 -51
@@ -6,7 +6,6 @@#include <linux/backlight.h> #include <linux/err.h> #include <linux/fb.h> -#include <linux/gpio.h> /* Only for legacy support */ #include <linux/gpio/consumer.h> #include <linux/init.h> #include <linux/kernel.h>
@@ -61,28 +60,6 @@ static const struct backlight_ops gpio_backlight_ops = { .check_fb = gpio_backlight_check_fb, }; -static int gpio_backlight_probe_dt (struct platform_device *pdev, -struct gpio_backlight *gbl) -{ -struct device *dev = &pdev->dev; -int ret; - - gbl->def_value =device_property_read_bool (dev,"default-on" ); - - gbl->gpiod =devm_gpiod_get (dev,NULL ,GPIOD_ASIS ); -if (IS_ERR (gbl->gpiod)) { - ret =PTR_ERR (gbl->gpiod); - -if (ret != -EPROBE_DEFER ) { -dev_err (dev, -"Error: The gpios parameter is missing or invalid.\n" ); - } -return ret; - } - -return 0 ; -} -static int gpio_backlight_initial_power_state (struct gpio_backlight *gbl) {struct device_node *node = gbl->dev->of_node;
@@ -114,35 +91,18 @@ static int gpio_backlight_probe(struct platform_device *pdev) gbl->dev = &pdev->dev; -if (pdev->dev.fwnode) { - ret =gpio_backlight_probe_dt (pdev, gbl); -if (ret) -return ret; - }else if (pdata) { -/* -* Legacy platform data GPIO retrieveal. Do not expand -* the use of this code path, currently only used by one -* SH board. -*/ -unsigned long flags =GPIOF_DIR_OUT ; - +if (pdata) gbl->fbdev = pdata->fbdev; - gbl->def_value = pdata->def_value; - flags |= gbl->def_value ?GPIOF_INIT_HIGH :GPIOF_INIT_LOW ; - - ret =devm_gpio_request_one (gbl->dev, pdata->gpio, flags, - pdata ? pdata->name :"backlight" ); -if (ret <0 ) { -dev_err (&pdev->dev,"unable to request GPIO\n" ); -return ret; - } - gbl->gpiod =gpio_to_desc (pdata->gpio); -if (!gbl->gpiod) -return -EINVAL ; - }else { -dev_err (&pdev->dev, -"failed to find platform data or device tree node.\n" ); -return -ENODEV ; + + gbl->def_value =device_property_read_bool (&pdev->dev,"default-on" ); + + gbl->gpiod =devm_gpiod_get (&pdev->dev,NULL ,GPIOD_ASIS ); +if (IS_ERR (gbl->gpiod)) { + ret =PTR_ERR (gbl->gpiod); +if (ret != -EPROBE_DEFER ) +dev_err (&pdev->dev, +"Error: The gpios parameter is missing or invalid.\n" ); +return ret; }memset (&props,0 ,sizeof (props));
Signature · 1 line
2.23.0
PATCH v7 6/9 sh: ecovec24: don't set unused fields in platform data
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Platform data fields other than fbdev are no longer used by the backlight driver. Remove them.
--- arch/sh/boards/mach-ecovec24/setup.c | 3 --- 1 file changed, 3 deletions(-)
arch/sh/boards/mach-ecovec24/setup.c +0 -3
@@ -386,9 +386,6 @@ static struct property_entry gpio_backlight_props[] = {static struct gpio_backlight_platform_data gpio_backlight_data = { .fbdev = &lcdc_device.dev, - .gpio =GPIO_PTR1 , - .def_value =1 , - .name ="backlight" , };static const struct platform_device_info gpio_backlight_device_info = {
Signature · 1 line
2.23.0
PATCH v7 7/9 backlight: gpio: remove unused fields from platform data
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Remove the platform data fields that nobody uses.
--- include/linux/platform_data/gpio_backlight.h | 3 --- 1 file changed, 3 deletions(-)
include/linux/platform_data/gpio_backlight.h +0 -3
@@ -9,9 +9,6 @@ struct device;struct gpio_backlight_platform_data {struct device *fbdev; -int gpio; -int def_value; -const char *name; };#endif
Signature · 1 line
2.23.0
PATCH v7 8/9 backlight: gpio: use a helper variable for &pdev->dev
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
Instead of dereferencing pdev each time, use a helper variable for the associated device pointer.
--- drivers/video/backlight/gpio_backlight.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-)
drivers/video/backlight/gpio_backlight.c +11 -12
@@ -78,29 +78,29 @@ static int gpio_backlight_initial_power_state(struct gpio_backlight *gbl)static int gpio_backlight_probe (struct platform_device *pdev) { -struct gpio_backlight_platform_data *pdata = -dev_get_platdata (&pdev->dev); +struct device *dev = &pdev->dev; +struct gpio_backlight_platform_data *pdata =dev_get_platdata (dev);struct backlight_properties props;struct backlight_device *bl;struct gpio_backlight *gbl;int ret, init_brightness; - gbl =devm_kzalloc (&pdev->dev,sizeof (*gbl),GFP_KERNEL ); + gbl =devm_kzalloc (dev,sizeof (*gbl),GFP_KERNEL );if (gbl ==NULL )return -ENOMEM ; - gbl->dev = &pdev->dev; + gbl->dev = dev;if (pdata) gbl->fbdev = pdata->fbdev; - gbl->def_value =device_property_read_bool (&pdev->dev,"default-on" ); + gbl->def_value =device_property_read_bool (dev,"default-on" ); - gbl->gpiod =devm_gpiod_get (&pdev->dev,NULL ,GPIOD_ASIS ); + gbl->gpiod =devm_gpiod_get (dev,NULL ,GPIOD_ASIS );if (IS_ERR (gbl->gpiod)) { ret =PTR_ERR (gbl->gpiod);if (ret != -EPROBE_DEFER ) -dev_err (&pdev->dev, +dev_err (dev,"Error: The gpios parameter is missing or invalid.\n" );return ret; }
@@ -108,11 +108,10 @@ static int gpio_backlight_probe(struct platform_device *pdev)memset (&props,0 ,sizeof (props)); props.type =BACKLIGHT_RAW ; props.max_brightness =1 ; - bl =devm_backlight_device_register (&pdev->dev,dev_name (&pdev->dev), - &pdev->dev, gbl, &gpio_backlight_ops, - &props); + bl =devm_backlight_device_register (dev,dev_name (dev), dev, gbl, + &gpio_backlight_ops, &props);if (IS_ERR (bl)) { -dev_err (&pdev->dev,"failed to register backlight\n" ); +dev_err (dev,"failed to register backlight\n" );return PTR_ERR (bl); }
@@ -122,7 +121,7 @@ static int gpio_backlight_probe(struct platform_device *pdev) init_brightness =gpio_backlight_get_next_brightness (bl); ret =gpiod_direction_output (gbl->gpiod, init_brightness);if (ret) { -dev_err (&pdev->dev,"failed to set initial brightness\n" ); +dev_err (dev,"failed to set initial brightness\n" );return ret; }
Signature · 1 line
2.23.0
PATCH v7 9/9 backlight: gpio: pull gpio_backlight_initial_power_state() into probe
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
The probe function in the gpio-backlight driver is quite short. If we pull gpio_backlight_initial_power_state() into probe we can drop two more fields from struct gpio_backlight and shrink the driver code.
--- drivers/video/backlight/gpio_backlight.c | 38 +++++++++--------------- 1 file changed, 14 insertions(+), 24 deletions(-)
drivers/video/backlight/gpio_backlight.c +14 -24
@@ -17,11 +17,8 @@#include <linux/slab.h> struct gpio_backlight { -struct device *dev;struct device *fbdev; -struct gpio_desc *gpiod; -int def_value; };static int gpio_backlight_get_next_brightness (struct backlight_device *bl)
@@ -60,41 +57,24 @@ static const struct backlight_ops gpio_backlight_ops = { .check_fb = gpio_backlight_check_fb, }; -static int gpio_backlight_initial_power_state (struct gpio_backlight *gbl) -{ -struct device_node *node = gbl->dev->of_node; - -/* Not booted with device tree or no phandle link to the node */ -if (!node || !node->phandle) -return gbl->def_value ?FB_BLANK_UNBLANK :FB_BLANK_POWERDOWN ; - -/* if the enable GPIO is disabled, do not enable the backlight */ -if (gpiod_get_direction (gbl->gpiod) ==0 && -gpiod_get_value_cansleep (gbl->gpiod) ==0 ) -return FB_BLANK_POWERDOWN ; - -return FB_BLANK_UNBLANK ; -} -static int gpio_backlight_probe (struct platform_device *pdev) {struct device *dev = &pdev->dev;struct gpio_backlight_platform_data *pdata =dev_get_platdata (dev); +struct device_node *of_node = dev->of_node;struct backlight_properties props;struct backlight_device *bl;struct gpio_backlight *gbl; -int ret, init_brightness; +int ret, init_brightness, def_value; gbl =devm_kzalloc (dev,sizeof (*gbl),GFP_KERNEL );if (gbl ==NULL )return -ENOMEM ; - gbl->dev = dev; -if (pdata) gbl->fbdev = pdata->fbdev; - gbl->def_value =device_property_read_bool (dev,"default-on" ); + def_value =device_property_read_bool (dev,"default-on" ); gbl->gpiod =devm_gpiod_get (dev,NULL ,GPIOD_ASIS );if (IS_ERR (gbl->gpiod)) {
@@ -115,7 +95,17 @@ static int gpio_backlight_probe(struct platform_device *pdev)return PTR_ERR (bl); } - bl->props.power =gpio_backlight_initial_power_state (gbl); +/* Set the initial power state */ +if (!of_node || !of_node->phandle) +/* Not booted with device tree or no phandle link to the node */ + bl->props.power = def_value ?FB_BLANK_UNBLANK + :FB_BLANK_POWERDOWN ; +else if (gpiod_get_direction (gbl->gpiod) ==0 && +gpiod_get_value_cansleep (gbl->gpiod) ==0 ) + bl->props.power =FB_BLANK_POWERDOWN ; +else + bl->props.power =FB_BLANK_UNBLANK ; + bl->props.brightness =1 ; init_brightness =gpio_backlight_get_next_brightness (bl);
Signature · 1 line
2.23.0
wt., 22 paź 2019 o 10:36 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 57 lines
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
First two patches contain minor fixes. Third patch makes the driver explicitly drive the GPIO line. Fourth patch adds all necessary data structures to ecovec24. Patch 5/9 unifies much of the code for both pdata and non-pdata cases. Patches 6-7/9 remove unused platform data fields. Last two patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
I don't have access to this HW but hopefully this works. Only compile tested.
[1] https://lkml.org/lkml/2019/6/25/900
v1 -> v2:
- rebased on top of v5.3-rc1 and adjusted to the recent changes from Andy
- added additional two patches with minor improvementsv2 -> v3:
- in patch 7/7: used initializers to set values for pdata and dev local varsv3 -> v4:
- rebased on top of v5.4-rc1
- removed changes that are no longer relevant after commitec665b756e6f("backlight: gpio-backlight: Correct initial power state handling")
- added patch 7/7v4 -> v5:
- in patch 7/7: added a comment replacing the name of the function being pulled intoprobe()v5 -> v6:
- added a patch making the driver explicitly set the direction of the GPIO to output
- added a patch removing a redundant newlinev6 -> v7:
- renamed the function calculating the new GPIO value for status update
- collected more tagsBartosz Golaszewski (9):
backlight: gpio: remove unneeded include
backlight: gpio: remove stray newline
backlight: gpio: explicitly set the direction of the GPIO
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: simplify the platform data handling
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: remove unused fields from platform data
backlight: gpio: use a helper variable for&pdev->dev
backlight: gpio: pullgpio_backlight_initial_power_state()into probe
Quoted 8 lines
arch/sh/boards/mach-ecovec24/setup.c | 33 +++-- drivers/video/backlight/gpio_backlight.c | 128 +++++++------------ include/linux/platform_data/gpio_backlight.h | 3 - 3 files changed, 69 insertions(+), 95 deletions(-)--
2.23.0
Lee, Daniel, Jingoo,
Jacopo is travelling until November 1st and won't be able to test this again before this date. Do you think you can pick it up and in case anything's broken on SH, we can fix it after v5.5-rc1, so that it doesn't miss another merge window?
Bart
Re: [PATCH v7 3/9] backlight: gpio: explicitly set the direction of the GPIO
In reply to Bartosz GolaszewskiQuoted 8 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
The GPIO backlight driver currently requests the line 'as is', without acively setting its direction. This can lead to problems: if the line is in input mode by default, we won't be able to drive it later when updating the status and also reading its initial value doesn't make sense for backlight setting.
Quoted 7 lines
Request the line 'as is' initially, so that we can read its value without affecting it but then change the direction to output explicitly when setting the initial brightness.
Also: check the current direction and only read the value if it's output.
Signed-off-by Bartosz Golaszewski <[email protected]>
Quoted 70 lines
--- drivers/video/backlight/gpio_backlight.c | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-)drivers/video/backlight/gpio_backlight.c +18
-5@@ -25,9 +25,8 @@ struct gpio_backlight {int def_value; }; -static int gpio_backlight_update_status (struct backlight_device *bl) +static int gpio_backlight_get_next_brightness (struct backlight_device *bl) { -struct gpio_backlight *gbl =bl_get_data (bl);int brightness = bl->props.brightness; if (bl->props.power != FB_BLANK_UNBLANK ||@@ -35,6 +34,14 @@ static int gpio_backlight_update_status(struct backlight_device *bl) bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK)) brightness =0 ; +return brightness; +} + +static int gpio_backlight_update_status (struct backlight_device *bl) +{ +struct gpio_backlight *gbl =bl_get_data (bl); +int brightness =gpio_backlight_get_next_brightness (bl); +gpiod_set_value_cansleep (gbl->gpiod, brightness);return 0 ;@@ -85,7 +92,8 @@ static int gpio_backlight_initial_power_state(struct gpio_backlight *gbl)return gbl->def_value ?FB_BLANK_UNBLANK :FB_BLANK_POWERDOWN ;/* if the enable GPIO is disabled, do not enable the backlight */ -if (gpiod_get_value_cansleep (gbl->gpiod) ==0 ) +if (gpiod_get_direction (gbl->gpiod) ==0 && +gpiod_get_value_cansleep (gbl->gpiod) ==0 )return FB_BLANK_POWERDOWN ;return FB_BLANK_UNBLANK ;@@ -98,7 +106,7 @@ static int gpio_backlight_probe(struct platform_device *pdev)struct backlight_properties props;struct backlight_device *bl;struct gpio_backlight *gbl; -int ret; +int ret, init_brightness; gbl =devm_kzalloc (&pdev->dev,sizeof (*gbl),GFP_KERNEL );if (gbl ==NULL )@@ -151,7 +159,12 @@ static int gpio_backlight_probe(struct platform_device *pdev) bl->props.power =gpio_backlight_initial_power_state (gbl); bl->props.brightness =1 ; -backlight_update_status (bl); + init_brightness =gpio_backlight_get_next_brightness (bl); + ret =gpiod_direction_output (gbl->gpiod, init_brightness); +if (ret) { +dev_err (&pdev->dev,"failed to set initial brightness\n" ); +return ret; + }platform_set_drvdata (pdev, bl);return 0 ;Signature · 1 line
2.23.0
Quoted 67 lines · Bartosz Golaszewski
wt., 22 paź 2019 o 10:36 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 57 lines
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
First two patches contain minor fixes. Third patch makes the driver explicitly drive the GPIO line. Fourth patch adds all necessary data structures to ecovec24. Patch 5/9 unifies much of the code for both pdata and non-pdata cases. Patches 6-7/9 remove unused platform data fields. Last two patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
I don't have access to this HW but hopefully this works. Only compile tested.
[1] https://lkml.org/lkml/2019/6/25/900
v1 -> v2:
- rebased on top of v5.3-rc1 and adjusted to the recent changes from Andy
- added additional two patches with minor improvementsv2 -> v3:
- in patch 7/7: used initializers to set values for pdata and dev local varsv3 -> v4:
- rebased on top of v5.4-rc1
- removed changes that are no longer relevant after commitec665b756e6f("backlight: gpio-backlight: Correct initial power state handling")
- added patch 7/7v4 -> v5:
- in patch 7/7: added a comment replacing the name of the function being pulled intoprobe()v5 -> v6:
- added a patch making the driver explicitly set the direction of the GPIO to output
- added a patch removing a redundant newlinev6 -> v7:
- renamed the function calculating the new GPIO value for status update
- collected more tagsBartosz Golaszewski (9):
backlight: gpio: remove unneeded include
backlight: gpio: remove stray newline
backlight: gpio: explicitly set the direction of the GPIO
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: simplify the platform data handling
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: remove unused fields from platform data
backlight: gpio: use a helper variable for&pdev->dev
backlight: gpio: pullgpio_backlight_initial_power_state()into probeQuoted 8 lines
arch/sh/boards/mach-ecovec24/setup.c | 33 +++-- drivers/video/backlight/gpio_backlight.c | 128 +++++++------------ include/linux/platform_data/gpio_backlight.h | 3 - 3 files changed, 69 insertions(+), 95 deletions(-)--
2.23.0
Quoted 6 lines
Lee, Daniel, Jingoo,
Jacopo is travelling until November 1st and won't be able to test this again before this date. Do you think you can pick it up and in case anything's broken on SH, we can fix it after v5.5-rc1, so that it doesn't miss another merge window?
Outside of holidays and other emergencies Lee usually collects up the patches for backlight. I'm not sure when he plans to close things for v5.5 .
Daniel.
Quoted 66 lines · Daniel Thompson
Quoted 65 lines · Bartosz Golaszewski
wt., 22 paź 2019 o 10:36 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 63 lines
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
First two patches contain minor fixes. Third patch makes the driver explicitly drive the GPIO line. Fourth patch adds all necessary data structures to ecovec24. Patch 5/9 unifies much of the code for both pdata and non-pdata cases. Patches 6-7/9 remove unused platform data fields. Last two patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
I don't have access to this HW but hopefully this works. Only compile tested.
[1] https://lkml.org/lkml/2019/6/25/900
v1 -> v2:
- rebased on top of v5.3-rc1 and adjusted to the recent changes from Andy
- added additional two patches with minor improvementsv2 -> v3:
- in patch 7/7: used initializers to set values for pdata and dev local varsv3 -> v4:
- rebased on top of v5.4-rc1
- removed changes that are no longer relevant after commitec665b756e6f("backlight: gpio-backlight: Correct initial power state handling")
- added patch 7/7v4 -> v5:
- in patch 7/7: added a comment replacing the name of the function being pulled intoprobe()v5 -> v6:
- added a patch making the driver explicitly set the direction of the GPIO to output
- added a patch removing a redundant newlinev6 -> v7:
- renamed the function calculating the new GPIO value for status update
- collected more tagsBartosz Golaszewski (9):
backlight: gpio: remove unneeded include
backlight: gpio: remove stray newline
backlight: gpio: explicitly set the direction of the GPIO
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: simplify the platform data handling
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: remove unused fields from platform data
backlight: gpio: use a helper variable for&pdev->dev
backlight: gpio: pullgpio_backlight_initial_power_state()into probearch/sh/boards/mach-ecovec24/setup.c | 33 +++-- drivers/video/backlight/gpio_backlight.c | 128 +++++++------------ include/linux/platform_data/gpio_backlight.h | 3 - 3 files changed, 69 insertions(+), 95 deletions(-)
Quoted 6 lines
Quoted 6 lines
Lee, Daniel, Jingoo,
Jacopo is travelling until November 1st and won't be able to test this again before this date. Do you think you can pick it up and in case anything's broken on SH, we can fix it after v5.5-rc1, so that it doesn't miss another merge window?
November 1st (-rc6) will be fine.
I'd rather apply it late-tested than early-non-tested.
Hopefully Jacopo can prioritise testing this on Thursday or Friday, since Monday will be -rc7 which is really cutting it fine.
Quoted 3 lines
Outside of holidays and other emergencies Lee usually collects up the patches for backlight. I'm not sure when he plans to close things for v5.5.
In special cases such as these I can remain flexible.
Signature · 4 lines
Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Hello,
Quoted 75 lines · Lee Jones
Quoted 66 lines · Daniel Thompson
Quoted 65 lines · Bartosz Golaszewski
wt., 22 paź 2019 o 10:36 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 63 lines
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
First two patches contain minor fixes. Third patch makes the driver explicitly drive the GPIO line. Fourth patch adds all necessary data structures to ecovec24. Patch 5/9 unifies much of the code for both pdata and non-pdata cases. Patches 6-7/9 remove unused platform data fields. Last two patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
I don't have access to this HW but hopefully this works. Only compile tested.
[1] https://lkml.org/lkml/2019/6/25/900
v1 -> v2:
- rebased on top of v5.3-rc1 and adjusted to the recent changes from Andy
- added additional two patches with minor improvementsv2 -> v3:
- in patch 7/7: used initializers to set values for pdata and dev local varsv3 -> v4:
- rebased on top of v5.4-rc1
- removed changes that are no longer relevant after commitec665b756e6f("backlight: gpio-backlight: Correct initial power state handling")
- added patch 7/7v4 -> v5:
- in patch 7/7: added a comment replacing the name of the function being pulled intoprobe()v5 -> v6:
- added a patch making the driver explicitly set the direction of the GPIO to output
- added a patch removing a redundant newlinev6 -> v7:
- renamed the function calculating the new GPIO value for status update
- collected more tagsBartosz Golaszewski (9):
backlight: gpio: remove unneeded include
backlight: gpio: remove stray newline
backlight: gpio: explicitly set the direction of the GPIO
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: simplify the platform data handling
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: remove unused fields from platform data
backlight: gpio: use a helper variable for&pdev->dev
backlight: gpio: pullgpio_backlight_initial_power_state()into probearch/sh/boards/mach-ecovec24/setup.c | 33 +++-- drivers/video/backlight/gpio_backlight.c | 128 +++++++------------ include/linux/platform_data/gpio_backlight.h | 3 - 3 files changed, 69 insertions(+), 95 deletions(-)Quoted 6 lines
Quoted 6 lines
Lee, Daniel, Jingoo,
Jacopo is travelling until November 1st and won't be able to test this again before this date. Do you think you can pick it up and in case anything's broken on SH, we can fix it after v5.5-rc1, so that it doesn't miss another merge window?
Quoted 6 lines
November 1st (-rc6) will be fine.
I'd rather apply it late-tested than early-non-tested.
Hopefully Jacopo can prioritise testing this on Thursday or Friday, since Monday will be -rc7 which is really cutting it fine.
I'll do my best, I'll get home Friday late afternoon :)
Quoted 5 lines
Quoted 4 lines
Outside of holidays and other emergencies Lee usually collects up the patches for backlight. I'm not sure when he plans to close things for v5.5.
Quoted 7 lines
In special cases such as these I can remain flexible.
--
Lee Jones [李琼斯]
Linaro Services Technical LeadLinaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 2 lines · Jacopo Mondi
Quoted 1 line · Lee Jones
On Wed, 23 Oct 2019, Daniel Thompson wrote:
[...]
Quoted 5 lines
Quoted 5 lines
Quoted 4 lines
Quoted 4 lines
Jacopo is travelling until November 1st and won't be able to test this again before this date. Do you think you can pick it up and in case anything's broken on SH, we can fix it after v5.5-rc1, so that it doesn't miss another merge window?
Quoted 8 lines
Quoted 6 lines
November 1st (-rc6) will be fine.
I'd rather apply it late-tested than early-non-tested.
Hopefully Jacopo can prioritise testing this on Thursday or Friday, since Monday will be -rc7 which is really cutting it fine.
I'll do my best, I'll get home Friday late afternoon :)
Thanks. We'd all really appreciate it.
Signature · 4 lines
Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Quoted 78 lines · Jacopo Mondi
Hello,
Quoted 75 lines · Lee Jones
Quoted 72 lines · Daniel Thompson
Quoted 71 lines · Bartosz Golaszewski
wt., 22 paź 2019 o 10:36 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 57 lines
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
First two patches contain minor fixes. Third patch makes the driver explicitly drive the GPIO line. Fourth patch adds all necessary data structures to ecovec24. Patch 5/9 unifies much of the code for both pdata and non-pdata cases. Patches 6-7/9 remove unused platform data fields. Last two patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
I don't have access to this HW but hopefully this works. Only compile tested.
[1] https://lkml.org/lkml/2019/6/25/900
v1 -> v2:
- rebased on top of v5.3-rc1 and adjusted to the recent changes from Andy
- added additional two patches with minor improvementsv2 -> v3:
- in patch 7/7: used initializers to set values for pdata and dev local varsv3 -> v4:
- rebased on top of v5.4-rc1
- removed changes that are no longer relevant after commitec665b756e6f("backlight: gpio-backlight: Correct initial power state handling")
- added patch 7/7v4 -> v5:
- in patch 7/7: added a comment replacing the name of the function being pulled intoprobe()v5 -> v6:
- added a patch making the driver explicitly set the direction of the GPIO to output
- added a patch removing a redundant newlinev6 -> v7:
- renamed the function calculating the new GPIO value for status update
- collected more tagsBartosz Golaszewski (9):
backlight: gpio: remove unneeded include
backlight: gpio: remove stray newline
backlight: gpio: explicitly set the direction of the GPIO
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: simplify the platform data handling
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: remove unused fields from platform data
backlight: gpio: use a helper variable for&pdev->dev
backlight: gpio: pullgpio_backlight_initial_power_state()into probeQuoted 6 lines
arch/sh/boards/mach-ecovec24/setup.c | 33 +++-- drivers/video/backlight/gpio_backlight.c | 128 +++++++------------ include/linux/platform_data/gpio_backlight.h | 3 - 3 files changed, 69 insertions(+), 95 deletions(-)Lee, Daniel, Jingoo,
Jacopo is travelling until November 1st and won't be able to test this again before this date. Do you think you can pick it up and in case anything's broken on SH, we can fix it after v5.5-rc1, so that it doesn't miss another merge window?
Quoted 8 lines
Quoted 6 lines
November 1st (-rc6) will be fine.
I'd rather apply it late-tested than early-non-tested.
Hopefully Jacopo can prioritise testing this on Thursday or Friday, since Monday will be -rc7 which is really cutting it fine.
I'll do my best, I'll get home Friday late afternoon :)
Welcome home!
Just a little reminder in your inbox. TIA. :)
Signature · 4 lines
Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Jacopo Mondi
Tested-byHello,
as promised...
Quoted 84 lines · Lee Jones
Quoted 82 lines · Jacopo Mondi
Hello,
Quoted 79 lines · Lee Jones
Quoted 66 lines · Daniel Thompson
Quoted 65 lines · Bartosz Golaszewski
wt., 22 paź 2019 o 10:36 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 63 lines
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
First two patches contain minor fixes. Third patch makes the driver explicitly drive the GPIO line. Fourth patch adds all necessary data structures to ecovec24. Patch 5/9 unifies much of the code for both pdata and non-pdata cases. Patches 6-7/9 remove unused platform data fields. Last two patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
I don't have access to this HW but hopefully this works. Only compile tested.
[1] https://lkml.org/lkml/2019/6/25/900
v1 -> v2:
- rebased on top of v5.3-rc1 and adjusted to the recent changes from Andy
- added additional two patches with minor improvementsv2 -> v3:
- in patch 7/7: used initializers to set values for pdata and dev local varsv3 -> v4:
- rebased on top of v5.4-rc1
- removed changes that are no longer relevant after commitec665b756e6f("backlight: gpio-backlight: Correct initial power state handling")
- added patch 7/7v4 -> v5:
- in patch 7/7: added a comment replacing the name of the function being pulled intoprobe()v5 -> v6:
- added a patch making the driver explicitly set the direction of the GPIO to output
- added a patch removing a redundant newlinev6 -> v7:
- renamed the function calculating the new GPIO value for status update
- collected more tagsBartosz Golaszewski (9):
backlight: gpio: remove unneeded include
backlight: gpio: remove stray newline
backlight: gpio: explicitly set the direction of the GPIO
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: simplify the platform data handling
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: remove unused fields from platform data
backlight: gpio: use a helper variable for&pdev->dev
backlight: gpio: pullgpio_backlight_initial_power_state()into probearch/sh/boards/mach-ecovec24/setup.c | 33 +++-- drivers/video/backlight/gpio_backlight.c | 128 +++++++------------ include/linux/platform_data/gpio_backlight.h | 3 - 3 files changed, 69 insertions(+), 95 deletions(-)Quoted 6 lines
Quoted 6 lines
Lee, Daniel, Jingoo,
Jacopo is travelling until November 1st and won't be able to test this again before this date. Do you think you can pick it up and in case anything's broken on SH, we can fix it after v5.5-rc1, so that it doesn't miss another merge window?
November 1st (-rc6) will be fine.
I'd rather apply it late-tested than early-non-tested.
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
Hopefully Jacopo can prioritise testing this on Thursday or Friday, since Monday will be -rc7 which is really cutting it fine.
I'll do my best, I'll get home Friday late afternoon :)
Welcome home!
Just a little reminder in your inbox. TIA. :)
For the ecovec part:
Thanks
j
Quoted 10 lines
--
Lee Jones [李琼斯]
Linaro Services Technical LeadLinaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
pt., 1 lis 2019 o 16:39 Jacopo Mondi <[email protected]> napisał(a):
Quoted 92 lines
Hello,
as promised...Quoted 87 lines · Lee Jones
Quoted 85 lines · Jacopo Mondi
Hello,
Quoted 81 lines · Lee Jones
Quoted 66 lines · Daniel Thompson
Quoted 65 lines · Bartosz Golaszewski
wt., 22 paź 2019 o 10:36 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 63 lines
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
First two patches contain minor fixes. Third patch makes the driver explicitly drive the GPIO line. Fourth patch adds all necessary data structures to ecovec24. Patch 5/9 unifies much of the code for both pdata and non-pdata cases. Patches 6-7/9 remove unused platform data fields. Last two patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
I don't have access to this HW but hopefully this works. Only compile tested.
[1] https://lkml.org/lkml/2019/6/25/900
v1 -> v2:
- rebased on top of v5.3-rc1 and adjusted to the recent changes from Andy
- added additional two patches with minor improvementsv2 -> v3:
- in patch 7/7: used initializers to set values for pdata and dev local varsv3 -> v4:
- rebased on top of v5.4-rc1
- removed changes that are no longer relevant after commitec665b756e6f("backlight: gpio-backlight: Correct initial power state handling")
- added patch 7/7v4 -> v5:
- in patch 7/7: added a comment replacing the name of the function being pulled intoprobe()v5 -> v6:
- added a patch making the driver explicitly set the direction of the GPIO to output
- added a patch removing a redundant newlinev6 -> v7:
- renamed the function calculating the new GPIO value for status update
- collected more tagsBartosz Golaszewski (9):
backlight: gpio: remove unneeded include
backlight: gpio: remove stray newline
backlight: gpio: explicitly set the direction of the GPIO
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: simplify the platform data handling
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: remove unused fields from platform data
backlight: gpio: use a helper variable for&pdev->dev
backlight: gpio: pullgpio_backlight_initial_power_state()into probearch/sh/boards/mach-ecovec24/setup.c | 33 +++-- drivers/video/backlight/gpio_backlight.c | 128 +++++++------------ include/linux/platform_data/gpio_backlight.h | 3 - 3 files changed, 69 insertions(+), 95 deletions(-)Quoted 6 lines
Quoted 6 lines
Lee, Daniel, Jingoo,
Jacopo is travelling until November 1st and won't be able to test this again before this date. Do you think you can pick it up and in case anything's broken on SH, we can fix it after v5.5-rc1, so that it doesn't miss another merge window?
November 1st (-rc6) will be fine.
I'd rather apply it late-tested than early-non-tested.
Hopefully Jacopo can prioritise testing this on Thursday or Friday, since Monday will be -rc7 which is really cutting it fine.
Quoted 9 lines
Quoted 5 lines
Quoted 1 line
I'll do my best, I'll get home Friday late afternoon :)
Welcome home!
Just a little reminder in your inbox. TIA. :)
For the ecovec part:
Tested-by Jacopo Mondi <[email protected]>
Thanks Jacopo!
Lee: I hope it's not too late to get it picked up for v5.5?
Best regards,
Bartosz Golaszewski
Quoted 14 lines
Thanks
jQuoted 10 lines
--
Lee Jones [李琼斯]
Linaro Services Technical LeadLinaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
pon., 4 lis 2019 o 10:22 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 100 lines
pt., 1 lis 2019 o 16:39 Jacopo Mondi <[email protected]> napisał(a):
Quoted 98 lines
Hello,
as promised...Quoted 92 lines · Lee Jones
Quoted 78 lines · Jacopo Mondi
Hello,
Quoted 75 lines · Lee Jones
Quoted 72 lines · Daniel Thompson
Quoted 71 lines · Bartosz Golaszewski
wt., 22 paź 2019 o 10:36 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 57 lines
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
First two patches contain minor fixes. Third patch makes the driver explicitly drive the GPIO line. Fourth patch adds all necessary data structures to ecovec24. Patch 5/9 unifies much of the code for both pdata and non-pdata cases. Patches 6-7/9 remove unused platform data fields. Last two patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
I don't have access to this HW but hopefully this works. Only compile tested.
[1] https://lkml.org/lkml/2019/6/25/900
v1 -> v2:
- rebased on top of v5.3-rc1 and adjusted to the recent changes from Andy
- added additional two patches with minor improvementsv2 -> v3:
- in patch 7/7: used initializers to set values for pdata and dev local varsv3 -> v4:
- rebased on top of v5.4-rc1
- removed changes that are no longer relevant after commitec665b756e6f("backlight: gpio-backlight: Correct initial power state handling")
- added patch 7/7v4 -> v5:
- in patch 7/7: added a comment replacing the name of the function being pulled intoprobe()v5 -> v6:
- added a patch making the driver explicitly set the direction of the GPIO to output
- added a patch removing a redundant newlinev6 -> v7:
- renamed the function calculating the new GPIO value for status update
- collected more tagsBartosz Golaszewski (9):
backlight: gpio: remove unneeded include
backlight: gpio: remove stray newline
backlight: gpio: explicitly set the direction of the GPIO
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: simplify the platform data handling
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: remove unused fields from platform data
backlight: gpio: use a helper variable for&pdev->dev
backlight: gpio: pullgpio_backlight_initial_power_state()into probeQuoted 6 lines
arch/sh/boards/mach-ecovec24/setup.c | 33 +++-- drivers/video/backlight/gpio_backlight.c | 128 +++++++------------ include/linux/platform_data/gpio_backlight.h | 3 - 3 files changed, 69 insertions(+), 95 deletions(-)Lee, Daniel, Jingoo,
Jacopo is travelling until November 1st and won't be able to test this again before this date. Do you think you can pick it up and in case anything's broken on SH, we can fix it after v5.5-rc1, so that it doesn't miss another merge window?
Quoted 8 lines
Quoted 6 lines
November 1st (-rc6) will be fine.
I'd rather apply it late-tested than early-non-tested.
Hopefully Jacopo can prioritise testing this on Thursday or Friday, since Monday will be -rc7 which is really cutting it fine.
I'll do my best, I'll get home Friday late afternoon :)
Welcome home!
Just a little reminder in your inbox. TIA. :)
Quoted 8 lines
Quoted 3 lines
For the ecovec part:
Tested-by Jacopo Mondi <[email protected]>Thanks Jacopo!
Lee: I hope it's not too late to get it picked up for v5.5?
Hi, just a gentle ping for this series, because I'm afraid it will miss yet another merge window.
Thanks in advance!
Bartosz Golaszewski
Quoted 105 lines · Bartosz Golaszewski
pon., 4 lis 2019 o 10:22 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 104 lines
pt., 1 lis 2019 o 16:39 Jacopo Mondi <[email protected]> napisał(a):
Quoted 101 lines
Hello,
as promised...Quoted 84 lines · Lee Jones
Quoted 82 lines · Jacopo Mondi
Hello,
Quoted 79 lines · Lee Jones
Quoted 66 lines · Daniel Thompson
Quoted 65 lines · Bartosz Golaszewski
wt., 22 paź 2019 o 10:36 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 63 lines
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
First two patches contain minor fixes. Third patch makes the driver explicitly drive the GPIO line. Fourth patch adds all necessary data structures to ecovec24. Patch 5/9 unifies much of the code for both pdata and non-pdata cases. Patches 6-7/9 remove unused platform data fields. Last two patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
I don't have access to this HW but hopefully this works. Only compile tested.
[1] https://lkml.org/lkml/2019/6/25/900
v1 -> v2:
- rebased on top of v5.3-rc1 and adjusted to the recent changes from Andy
- added additional two patches with minor improvementsv2 -> v3:
- in patch 7/7: used initializers to set values for pdata and dev local varsv3 -> v4:
- rebased on top of v5.4-rc1
- removed changes that are no longer relevant after commitec665b756e6f("backlight: gpio-backlight: Correct initial power state handling")
- added patch 7/7v4 -> v5:
- in patch 7/7: added a comment replacing the name of the function being pulled intoprobe()v5 -> v6:
- added a patch making the driver explicitly set the direction of the GPIO to output
- added a patch removing a redundant newlinev6 -> v7:
- renamed the function calculating the new GPIO value for status update
- collected more tagsBartosz Golaszewski (9):
backlight: gpio: remove unneeded include
backlight: gpio: remove stray newline
backlight: gpio: explicitly set the direction of the GPIO
sh: ecovec24: add additional properties to the backlight device
backlight: gpio: simplify the platform data handling
sh: ecovec24: don't set unused fields in platform data
backlight: gpio: remove unused fields from platform data
backlight: gpio: use a helper variable for&pdev->dev
backlight: gpio: pullgpio_backlight_initial_power_state()into probearch/sh/boards/mach-ecovec24/setup.c | 33 +++-- drivers/video/backlight/gpio_backlight.c | 128 +++++++------------ include/linux/platform_data/gpio_backlight.h | 3 - 3 files changed, 69 insertions(+), 95 deletions(-)Quoted 6 lines
Quoted 6 lines
Lee, Daniel, Jingoo,
Jacopo is travelling until November 1st and won't be able to test this again before this date. Do you think you can pick it up and in case anything's broken on SH, we can fix it after v5.5-rc1, so that it doesn't miss another merge window?
November 1st (-rc6) will be fine.
I'd rather apply it late-tested than early-non-tested.
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
Hopefully Jacopo can prioritise testing this on Thursday or Friday, since Monday will be -rc7 which is really cutting it fine.
I'll do my best, I'll get home Friday late afternoon :)
Welcome home!
Just a little reminder in your inbox. TIA. :)
For the ecovec part:
Tested-by Jacopo Mondi <[email protected]>
Quoted 7 lines
Quoted 4 lines
Thanks Jacopo!
Lee: I hope it's not too late to get it picked up for v5.5?
Hi, just a gentle ping for this series, because I'm afraid it will miss yet another merge window.
I have it marked to handle it, along with 10's of others.
Signature · 4 lines
Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Quoted 7 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
While working on my other series related to gpio-backlight[1] I noticed that we could simplify the driver if we made the only user of platform data use GPIO lookups and device properties. This series tries to do that.
Quoted 6 lines
First two patches contain minor fixes. Third patch makes the driver explicitly drive the GPIO line. Fourth patch adds all necessary data structures to ecovec24. Patch 5/9 unifies much of the code for both pdata and non-pdata cases. Patches 6-7/9 remove unused platform data fields. Last two patches contain additional improvements for the GPIO backlight driver while we're already modifying it.
All applied, thanks.
Signature · 4 lines
Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog