Skip to contentSkip to conversation

user-mode: Prune build dependencies (part 1)

PATCH Superseded Philippe Mathieu-Daudé 6 participants 20 messages May 4, 2020 – May 18, 2020

Subsystems (2)

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v3 cover user-mode: Prune build dependencies (part 1)

This is the first part of a series reducing user-mode dependencies. By stripping out unused code, the build and testing time is reduced (as is space used by objects).

Part 1 (generic):
- reduce user-mode object list
- remove some migration code from user-mode
- remove cpu_get_crash_info()

This series is fully reviewed.

Since v2:
- Rebased due to conflict when applying patch:
"util/Makefile: Reduce the user-mode object list" because commit 01ef6b9e4e modified util/Makefile.objs:
"linux-user: factor out reading of /proc/self/maps"

Since v1:
- Addressed Laurent/Richard review comments
- Removed 'exec: Drop redundant #ifdeffery'
- Removed 'target: Restrict write_elfXX_note() handlers to system-mode'

$ git backport-diff -u v1 -r v2
Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch
[down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively

001/12:[----] [--] 'Makefile: Only build virtiofsd if system-mode is enabled' 002/12:[----] [--] 'configure: Avoid building TCG when not needed' 003/12:[----] [--] 'tests/Makefile: Only display TCG-related tests when TCG is available' 004/12:[----] [--] 'tests/Makefile: Restrict some softmmu-only tests' 005/12:[----] [-C] 'util/Makefile: Reduce the user-mode object list' 006/12:[----] [--] 'stubs/Makefile: Reduce the user-mode object list' 007/12:[----] [--] 'target/riscv/cpu: Restrict CPU migration to system-mode' 008/12:[----] [--] 'exec: Assert CPU migration is not used on user-only build' 009/12:[----] [--] 'arch_init: Remove unused 'qapi-commands-misc.h' include' 010/12:[----] [--] 'target/i386: Restrict CpuClass::get_crash_info() to system-mode' 011/12:[----] [--] 'target/s390x: Restrict CpuClass::get_crash_info() to system-mode' 012/12:[----] [--] 'hw/core: Restrict CpuClass::get_crash_info() to system-mode'

Philippe Mathieu-Daudé (12):
Makefile: Only build virtiofsd if system-mode is enabled
configure: Avoid building TCG when not needed tests/Makefile: Only display TCG-related tests when TCG is available tests/Makefile: Restrict some softmmu-only tests util/Makefile: Reduce the user-mode object list stubs/Makefile: Reduce the user-mode object list target/riscv/cpu: Restrict CPU migration to system-mode
exec: Assert CPU migration is not used on user-only build
arch_init: Remove unused 'qapi-commands-misc.h' include target/i386: Restrict CpuClass::get_crash_info() to system-mode target/s390x: Restrict CpuClass::get_crash_info() to system-mode hw/core: Restrict CpuClass::get_crash_info() to system-mode

 configure              |  4 +++
 Makefile               |  2 +-
 include/hw/core/cpu.h  |  7 ++++-
 arch_init.c            |  1 -
 exec.c                 |  4 ++-
 hw/core/cpu.c          |  2 ++
 target/i386/cpu.c      |  6 ++++-
 target/riscv/cpu.c     |  6 +++--
 target/s390x/cpu.c     | 12 ++++-----
 stubs/Makefile.objs    | 52 +++++++++++++++++++++----------------
 tests/Makefile.include | 18 +++++++------
 util/Makefile.objs     | 59 +++++++++++++++++++++++++++---------------
 12 files changed, 108 insertions(+), 65 deletions(-)
Signature · 1 line
2.21.3
#1 lore raw

PATCH v3 1/12 Makefile: Only build virtiofsd if system-mode is enabled

Do not build the virtiofsd helper when configured with --disable-system.

---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Makefile +1 -1
index 34275f57c9..e46b6ef5d4 100644
@@ -345,7 +345,7 @@ HELPERS-y += vhost-user-gpu$(EXESUF)
 vhost-user-json-y += contrib/vhost-user-gpu/50-qemu-gpu.json
 endif
 
-ifeq ($(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyy)
+ifeq ($(CONFIG_SOFTMMU)$(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyyy)
 HELPERS-y += virtiofsd$(EXESUF)
 vhost-user-json-y += tools/virtiofsd/50-qemu-virtiofsd.json
 endif
Signature · 1 line
2.21.3
Acked-by on v3 1/12
#2 lore raw

Re: [PATCH v3 01/12] Makefile: Only build virtiofsd if system-mode is enabled

Quoted 5 lines · * Philippe Mathieu-Daudé ([email protected]) wrote:

Do not build the virtiofsd helper when configured with --disable-system.

Yeh that seems reasonable; although virtiofsd is self-contained enough that perhaps it should be unrelated to whether you're building that.

Quoted 21 lines
---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Makefile +1 -1
index 34275f57c9..e46b6ef5d4 100644
@@ -345,7 +345,7 @@ HELPERS-y += vhost-user-gpu$(EXESUF)
 vhost-user-json-y += contrib/vhost-user-gpu/50-qemu-gpu.json
 endif
 
-ifeq ($(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyy)
+ifeq ($(CONFIG_SOFTMMU)$(CONFIG_LINUX)$(CONFIG_SECCOMP)$(CONFIG_LIBCAP_NG),yyyy)
 HELPERS-y += virtiofsd$(EXESUF)
 vhost-user-json-y += tools/virtiofsd/50-qemu-virtiofsd.json
 endif
Signature · 1 line
2.21.3

--
Dr. David Alan Gilbert / [email protected] / Manchester, UK

#3 lore raw

PATCH v3 2/12 configure: Avoid building TCG when not needed

In reply to Philippe Mathieu-Daudé

Avoid building TCG when building only tools:

  ./configure --enable-tools --disable-system --disable-user

This saves us from running the soft-float tests enabled since commit 76170102508.

---
 configure | 4 ++++
 1 file changed, 4 insertions(+)
configure +4 -0
index 23b5e93752..e3b4afbb60 100755
@@ -1663,6 +1663,10 @@ if [ "$ARCH" = "unknown" ]; then
   linux_user="no"
 fi
 
+if [ "$bsd_user" = "no" -a "$linux_user" = "no" -a "$softmmu" = "no" ] ; then
+  tcg="no"
+fi
+
 default_target_list=""
 
 mak_wilds=""
Signature · 1 line
2.21.3
Reviewed-by on v3 2/12
#4 lore raw

Re: [PATCH v3 02/12] configure: Avoid building TCG when not needed

Quoted 10 lines · Philippe Mathieu-Daudé

Avoid building TCG when building only tools:

  ./configure --enable-tools --disable-system --disable-user

This saves us from running the soft-float tests enabled since commit 76170102508.

Alistair

Quoted 23 lines
---
 configure | 4 ++++
 1 file changed, 4 insertions(+)
configure +4 -1
index 23b5e93752..e3b4afbb60 100755
@@ -1663,6 +1663,10 @@ if [ "$ARCH" = "unknown" ]; then
   linux_user="no"
 fi
 
+if [ "$bsd_user" = "no" -a "$linux_user" = "no" -a "$softmmu" = "no" ] ; then
+  tcg="no"
+fi
+
 default_target_list=""
 
 mak_wilds=""
--

2.21.3

#5 lore raw

PATCH v3 3/12 tests/Makefile: Only display TCG-related tests when TCG is available

In reply to Philippe Mathieu-Daudé
---
 tests/Makefile.include | 2 ++
 1 file changed, 2 insertions(+)
tests/Makefile.include +2 -0
index 03a74b60f6..6bc3d1096b 100644
@@ -12,8 +12,10 @@ check-help:
 	@echo " $(MAKE) check-speed          Run qobject speed tests"
 	@echo " $(MAKE) check-qapi-schema    Run QAPI schema tests"
 	@echo " $(MAKE) check-block          Run block tests"
+ifeq ($(CONFIG_TCG),y)
 	@echo " $(MAKE) check-tcg            Run TCG tests"
 	@echo " $(MAKE) check-softfloat      Run FPU emulation tests"
+endif
 	@echo " $(MAKE) check-acceptance     Run all acceptance (functional) tests"
 	@echo
 	@echo " $(MAKE) check-report.tap     Generates an aggregated TAP test report"
Signature · 1 line
2.21.3
#6 lore raw

PATCH v3 4/12 tests/Makefile: Restrict some softmmu-only tests

In reply to Philippe Mathieu-Daudé

In the next commit we are going to remove some objects from the util-obj-y variable (objects which are not used by user-mode, when configured with --disable-system).
Then some system-mode tests are going to fail, due to the missing objects:

  $ make check-unit -k
    LINK    tests/test-iov
  /usr/bin/ld: tests/test-iov.o: in function `iov_from_buf':
  include/qemu/iov.h:49: undefined reference to `iov_from_buf_full'
  make: *** [rules.mak:124: tests/test-iov] Error 1
    LINK    tests/test-timed-average
  /usr/bin/ld: tests/test-timed-average.o: in function `account':
  tests/test-timed-average.c:27: undefined reference to `timed_average_account'
  make: *** [rules.mak:124: tests/test-timed-average] Error 1
    LINK    tests/test-util-filemonitor
  /usr/bin/ld: tests/test-util-filemonitor.o: in function `qemu_file_monitor_test_event_loop':
  tests/test-util-filemonitor.c:83: undefined reference to `main_loop_wait'
  make: *** [rules.mak:124: tests/test-util-filemonitor] Error 1
    LINK    tests/test-util-sockets
  /usr/bin/ld: tests/test-util-sockets.o: in function `test_socket_fd_pass_name_good':
  tests/test-util-sockets.c:91: undefined reference to `socket_connect'
  make: *** [rules.mak:124: tests/test-util-sockets] Error 1
    LINK    tests/test-base64
  /usr/bin/ld: tests/test-base64.o: in function `test_base64_good':
  tests/test-base64.c:35: undefined reference to `qbase64_decode'
  collect2: error: ld returned 1 exit status
  make: *** [rules.mak:124: tests/test-base64] Error 1
    LINK    tests/test-bufferiszero
  /usr/bin/ld: tests/test-bufferiszero.o: in function `test_1':
  tests/test-bufferiszero.c:31: undefined reference to `buffer_is_zero'
  make: *** [rules.mak:124: tests/test-bufferiszero] Error 1
  make: Target 'check-unit' not remade because of errors.

Instead, restrict these tests to system-mode, by using the $(CONFIG_SOFTMMU) variable.

---
v2: Reworded description with example (rth)

---
 tests/Makefile.include | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
tests/Makefile.include +8 -8
index 6bc3d1096b..0cb58aad26 100644
@@ -66,14 +66,14 @@ check-unit-y += tests/check-qlit$(EXESUF)
 check-unit-y += tests/test-qobject-output-visitor$(EXESUF)
 check-unit-y += tests/test-clone-visitor$(EXESUF)
 check-unit-y += tests/test-qobject-input-visitor$(EXESUF)
-check-unit-y += tests/test-qmp-cmds$(EXESUF)
+check-unit-$(CONFIG_SOFTMMU) += tests/test-qmp-cmds$(EXESUF)
 check-unit-y += tests/test-string-input-visitor$(EXESUF)
 check-unit-y += tests/test-string-output-visitor$(EXESUF)
 check-unit-y += tests/test-qmp-event$(EXESUF)
 check-unit-y += tests/test-opts-visitor$(EXESUF)
 check-unit-$(CONFIG_BLOCK) += tests/test-coroutine$(EXESUF)
 check-unit-y += tests/test-visitor-serialization$(EXESUF)
-check-unit-y += tests/test-iov$(EXESUF)
+check-unit-$(CONFIG_SOFTMMU) += tests/test-iov$(EXESUF)
 check-unit-y += tests/test-bitmap$(EXESUF)
 check-unit-$(CONFIG_BLOCK) += tests/test-aio$(EXESUF)
 check-unit-$(CONFIG_BLOCK) += tests/test-aio-multithread$(EXESUF)
@@ -108,7 +108,7 @@ check-unit-y += tests/test-qht$(EXESUF)
 check-unit-y += tests/test-qht-par$(EXESUF)
 check-unit-y += tests/test-bitops$(EXESUF)
 check-unit-y += tests/test-bitcnt$(EXESUF)
-check-unit-y += tests/test-qdev-global-props$(EXESUF)
+check-unit-$(CONFIG_SOFTMMU) += tests/test-qdev-global-props$(EXESUF)
 check-unit-y += tests/check-qom-interface$(EXESUF)
 check-unit-y += tests/check-qom-proplist$(EXESUF)
 check-unit-y += tests/test-qemu-opts$(EXESUF)
@@ -126,9 +126,9 @@ check-unit-$(call land,$(CONFIG_BLOCK),$(CONFIG_GNUTLS)) += tests/test-crypto-tl
 ifneq (,$(findstring qemu-ga,$(TOOLS)))
 check-unit-$(call land,$(CONFIG_LINUX),$(CONFIG_VIRTIO_SERIAL)) += tests/test-qga$(EXESUF)
 endif
-check-unit-y += tests/test-timed-average$(EXESUF)
-check-unit-$(CONFIG_INOTIFY1) += tests/test-util-filemonitor$(EXESUF)
-check-unit-y += tests/test-util-sockets$(EXESUF)
+check-unit-$(CONFIG_SOFTMMU) += tests/test-timed-average$(EXESUF)
+check-unit-$(call land,$(CONFIG_SOFTMMU),$(CONFIG_INOTIFY1)) += tests/test-util-filemonitor$(EXESUF)
+check-unit-$(CONFIG_SOFTMMU) += tests/test-util-sockets$(EXESUF)
 check-unit-$(CONFIG_BLOCK) += tests/test-authz-simple$(EXESUF)
 check-unit-$(CONFIG_BLOCK) += tests/test-authz-list$(EXESUF)
 check-unit-$(CONFIG_BLOCK) += tests/test-authz-listfile$(EXESUF)
@@ -139,7 +139,7 @@ check-unit-$(CONFIG_BLOCK) += tests/test-io-channel-file$(EXESUF)
 check-unit-$(call land,$(CONFIG_BLOCK),$(CONFIG_GNUTLS)) += tests/test-io-channel-tls$(EXESUF)
 check-unit-$(CONFIG_BLOCK) += tests/test-io-channel-command$(EXESUF)
 check-unit-$(CONFIG_BLOCK) += tests/test-io-channel-buffer$(EXESUF)
-check-unit-y += tests/test-base64$(EXESUF)
+check-unit-$(CONFIG_SOFTMMU) += tests/test-base64$(EXESUF)
 check-unit-$(call land,$(CONFIG_BLOCK),$(if $(CONFIG_NETTLE),y,$(CONFIG_GCRYPT))) += tests/test-crypto-pbkdf$(EXESUF)
 check-unit-$(CONFIG_BLOCK) += tests/test-crypto-ivgen$(EXESUF)
 check-unit-$(CONFIG_BLOCK)  += tests/test-crypto-afsplit$(EXESUF)
@@ -147,7 +147,7 @@ check-unit-$(call land,$(CONFIG_BLOCK),$(CONFIG_QEMU_PRIVATE_XTS)) += tests/test
 check-unit-$(CONFIG_BLOCK)  += tests/test-crypto-block$(EXESUF)
 check-unit-y += tests/test-logging$(EXESUF)
 check-unit-$(call land,$(CONFIG_BLOCK),$(CONFIG_REPLICATION)) += tests/test-replication$(EXESUF)
-check-unit-y += tests/test-bufferiszero$(EXESUF)
+check-unit-$(CONFIG_SOFTMMU) += tests/test-bufferiszero$(EXESUF)
 check-unit-y += tests/test-uuid$(EXESUF)
 check-unit-y += tests/ptimer-test$(EXESUF)
 check-unit-y += tests/test-qapi-util$(EXESUF)
Signature · 1 line
2.21.3
#7 lore raw

PATCH v3 5/12 util/Makefile: Reduce the user-mode object list

In reply to Philippe Mathieu-Daudé

These objects are not required when configured with --disable-system.

---
 util/Makefile.objs | 59 +++++++++++++++++++++++++++++-----------------
 1 file changed, 38 insertions(+), 21 deletions(-)
util/Makefile.objs +38 -21
index fe339c2636..cc5e37177a 100644
@@ -1,8 +1,4 @@
 util-obj-y = osdep.o cutils.o unicode.o qemu-timer-common.o
-util-obj-y += bufferiszero.o
-util-obj-y += lockcnt.o
-util-obj-y += aiocb.o async.o aio-wait.o thread-pool.o qemu-timer.o
-util-obj-y += main-loop.o
 util-obj-$(call lnot,$(CONFIG_ATOMIC64)) += atomic64.o
 util-obj-$(CONFIG_POSIX) += aio-posix.o
 util-obj-$(CONFIG_POSIX) += fdmon-poll.o
@@ -21,31 +17,20 @@ util-obj-$(CONFIG_WIN32) += oslib-win32.o
 util-obj-$(CONFIG_WIN32) += qemu-thread-win32.o
 util-obj-y += envlist.o path.o module.o
 util-obj-y += host-utils.o
-util-obj-y += bitmap.o bitops.o hbitmap.o
+util-obj-y += bitmap.o bitops.o
 util-obj-y += fifo8.o
-util-obj-y += nvdimm-utils.o
 util-obj-y += cacheinfo.o
 util-obj-y += error.o qemu-error.o
 util-obj-y += qemu-print.o
 util-obj-y += id.o
-util-obj-y += iov.o qemu-config.o qemu-sockets.o uri.o notify.o
+util-obj-y += qemu-config.o notify.o
 util-obj-y += qemu-option.o qemu-progress.o
 util-obj-y += keyval.o
-util-obj-y += hexdump.o
 util-obj-y += crc32c.o
 util-obj-y += uuid.o
-util-obj-y += throttle.o
 util-obj-y += getauxval.o
-util-obj-y += readline.o
 util-obj-y += rcu.o
 util-obj-$(CONFIG_MEMBARRIER) += sys_membarrier.o
-util-obj-y += qemu-coroutine.o qemu-coroutine-lock.o qemu-coroutine-io.o
-util-obj-y += qemu-coroutine-sleep.o
-util-obj-y += qemu-co-shared-resource.o
-util-obj-y += coroutine-$(CONFIG_COROUTINE_BACKEND).o
-util-obj-y += buffer.o
-util-obj-y += timed-average.o
-util-obj-y += base64.o
 util-obj-y += log.o
 util-obj-y += pagesize.o
 util-obj-y += qdist.o
@@ -54,13 +39,45 @@ util-obj-y += qsp.o
 util-obj-y += range.o
 util-obj-y += stats64.o
 util-obj-y += systemd.o
-util-obj-y += iova-tree.o
-util-obj-$(CONFIG_INOTIFY1) += filemonitor-inotify.o
-util-obj-$(call lnot,$(CONFIG_INOTIFY1)) += filemonitor-stub.o
-util-obj-$(CONFIG_LINUX) += vfio-helpers.o
 util-obj-$(CONFIG_POSIX) += drm.o
 util-obj-y += guest-random.o
 util-obj-$(CONFIG_GIO) += dbus.o
 dbus.o-cflags = $(GIO_CFLAGS)
 dbus.o-libs = $(GIO_LIBS)
 util-obj-$(CONFIG_USER_ONLY) += selfmap.o
+
+#######################################################################
+# code used by both qemu system emulation and qemu-img
+
+ifeq ($(call lor,$(CONFIG_SOFTMMU),$(CONFIG_TOOLS)),y)
+
+util-obj-y += aio-wait.o
+util-obj-y += aiocb.o
+util-obj-y += async.o
+util-obj-y += base64.o
+util-obj-y += buffer.o
+util-obj-y += bufferiszero.o
+util-obj-y += coroutine-$(CONFIG_COROUTINE_BACKEND).o
+util-obj-y += hexdump.o
+util-obj-y += lockcnt.o
+util-obj-y += iov.o
+util-obj-y += iova-tree.o
+util-obj-y += hbitmap.o
+util-obj-y += main-loop.o
+util-obj-y += nvdimm-utils.o
+util-obj-y += qemu-coroutine.o qemu-coroutine-lock.o qemu-coroutine-io.o
+util-obj-y += qemu-coroutine-sleep.o
+util-obj-y += qemu-co-shared-resource.o
+util-obj-y += qemu-sockets.o
+util-obj-y += qemu-timer.o
+util-obj-y += thread-pool.o
+util-obj-y += throttle.o
+util-obj-y += timed-average.o
+util-obj-y += uri.o
+
+util-obj-$(CONFIG_LINUX) += vfio-helpers.o
+util-obj-$(CONFIG_INOTIFY1) += filemonitor-inotify.o
+util-obj-$(call lnot,$(CONFIG_INOTIFY1)) += filemonitor-stub.o
+util-obj-$(CONFIG_BLOCK) += readline.o
+
+endif # CONFIG_SOFTMMU || CONFIG_TOOLS
Signature · 1 line
2.21.3
#8 lore raw

PATCH v3 6/12 stubs/Makefile: Reduce the user-mode object list

In reply to Philippe Mathieu-Daudé

These stubs are not required when configured with --disable-system.

---
 stubs/Makefile.objs | 52 ++++++++++++++++++++++++++-------------------
 1 file changed, 30 insertions(+), 22 deletions(-)
stubs/Makefile.objs +30 -22
index 45be5dc0ed..5ffa085c67 100644
@@ -1,46 +1,54 @@
-stub-obj-y += arch_type.o
-stub-obj-y += bdrv-next-monitor-owned.o
 stub-obj-y += blk-commit-all.o
-stub-obj-y += blockdev-close-all-bdrv-states.o
-stub-obj-y += clock-warp.o
 stub-obj-y += cpu-get-clock.o
 stub-obj-y += cpu-get-icount.o
 stub-obj-y += dump.o
 stub-obj-y += error-printf.o
 stub-obj-y += fdset.o
 stub-obj-y += gdbstub.o
-stub-obj-y += get-vm-name.o
-stub-obj-y += iothread.o
 stub-obj-y += iothread-lock.o
 stub-obj-y += is-daemonized.o
 stub-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
 stub-obj-$(CONFIG_LINUX_IO_URING) += io_uring.o
-stub-obj-y += machine-init-done.o
-stub-obj-y += migr-blocker.o
-stub-obj-y += change-state-handler.o
-stub-obj-y += monitor.o
 stub-obj-y += monitor-core.o
 stub-obj-y += notify-event.o
+stub-obj-y += qmp_memory_device.o
 stub-obj-y += qtest.o
+stub-obj-y += ramfb.o
 stub-obj-y += replay.o
-stub-obj-y += replay-user.o
 stub-obj-y += runstate-check.o
+stub-obj-$(CONFIG_SOFTMMU) += semihost.o
 stub-obj-y += set-fd-handler.o
+stub-obj-y += vmgenid.o
 stub-obj-y += sysbus.o
 stub-obj-y += tpm.o
 stub-obj-y += trace-control.o
-stub-obj-y += uuid.o
-stub-obj-y += vm-stop.o
 stub-obj-y += vmstate.o
+
+#######################################################################
+# code used by both qemu system emulation and qemu-img
+
+ifeq ($(call lor,$(CONFIG_SOFTMMU),$(CONFIG_TOOLS)),y)
+
+stub-obj-y += arch_type.o
+stub-obj-y += bdrv-next-monitor-owned.o
+stub-obj-y += blockdev-close-all-bdrv-states.o
+stub-obj-y += change-state-handler.o
+stub-obj-y += clock-warp.o
 stub-obj-y += fd-register.o
-stub-obj-y += qmp_memory_device.o
-stub-obj-y += target-monitor-defs.o
-stub-obj-y += target-get-monitor-def.o
-stub-obj-y += vmgenid.o
-stub-obj-y += xen-common.o
-stub-obj-y += xen-hvm.o
+stub-obj-y += fw_cfg.o
+stub-obj-y += get-vm-name.o
+stub-obj-y += iothread.o
+stub-obj-y += machine-init-done.o
+stub-obj-y += migr-blocker.o
+stub-obj-y += monitor.o
 stub-obj-y += pci-host-piix.o
 stub-obj-y += ram-block.o
-stub-obj-y += ramfb.o
-stub-obj-y += fw_cfg.o
-stub-obj-$(CONFIG_SOFTMMU) += semihost.o
+stub-obj-y += replay-user.o
+stub-obj-y += target-get-monitor-def.o
+stub-obj-y += target-monitor-defs.o
+stub-obj-y += uuid.o
+stub-obj-y += vm-stop.o
+stub-obj-y += xen-common.o
+stub-obj-y += xen-hvm.o
+
+endif # CONFIG_SOFTMMU || CONFIG_TOOLS
Signature · 1 line
2.21.3
#9 lore raw

PATCH v3 7/12 target/riscv/cpu: Restrict CPU migration to system-mode

In reply to Philippe Mathieu-Daudé
---
 target/riscv/cpu.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
target/riscv/cpu.c +4 -2
index 059d71f2c7..6c78337858 100644
@@ -485,10 +485,12 @@ static void riscv_cpu_init(Object *obj)
     cpu_set_cpustate_pointers(cpu);
 }
 
+#ifndef CONFIG_USER_ONLY
 static const VMStateDescription vmstate_riscv_cpu = {
     .name = "cpu",
     .unmigratable = 1,
 };
+#endif
 
 static Property riscv_cpu_properties[] = {
     DEFINE_PROP_BOOL("i", RISCVCPU, cfg.ext_i, true),
@@ -544,13 +546,13 @@ static void riscv_cpu_class_init(ObjectClass *c, void *data)
     cc->do_transaction_failed = riscv_cpu_do_transaction_failed;
     cc->do_unaligned_access = riscv_cpu_do_unaligned_access;
     cc->get_phys_page_debug = riscv_cpu_get_phys_page_debug;
+    /* For now, mark unmigratable: */
+    cc->vmsd = &vmstate_riscv_cpu;
 #endif
 #ifdef CONFIG_TCG
     cc->tcg_initialize = riscv_translate_init;
     cc->tlb_fill = riscv_cpu_tlb_fill;
 #endif
-    /* For now, mark unmigratable: */
-    cc->vmsd = &vmstate_riscv_cpu;
     device_class_set_props(dc, riscv_cpu_properties);
 }
 
Signature · 1 line
2.21.3
#10 lore raw

PATCH v3 8/12 exec: Assert CPU migration is not used on user-only build

In reply to Philippe Mathieu-Daudé
---
 exec.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
exec.c +3 -1
index 2874bb5088..3a39ffb1eb 100644
@@ -946,7 +946,9 @@ void cpu_exec_realizefn(CPUState *cpu, Error **errp)
 
     qemu_plugin_vcpu_init_hook(cpu);
 
-#ifndef CONFIG_USER_ONLY
+#ifdef CONFIG_USER_ONLY
+    assert(cc->vmsd == NULL);
+#else /* !CONFIG_USER_ONLY */
     if (qdev_get_vmsd(DEVICE(cpu)) == NULL) {
         vmstate_register(NULL, cpu->cpu_index, &vmstate_cpu_common, cpu);
     }
Signature · 1 line
2.21.3
Reviewed-by on v3 8/12
#11 lore raw

Re: [PATCH v3 08/12] exec: Assert CPU migration is not used on user-only build

Quoted 3 lines · Philippe Mathieu-Daudé

Alistair

Quoted 23 lines
---
 exec.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
exec.c +3 -2
index 2874bb5088..3a39ffb1eb 100644
@@ -946,7 +946,9 @@ void cpu_exec_realizefn(CPUState *cpu, Error **errp)
 
     qemu_plugin_vcpu_init_hook(cpu);
 
-#ifndef CONFIG_USER_ONLY
+#ifdef CONFIG_USER_ONLY
+    assert(cc->vmsd == NULL);
+#else /* !CONFIG_USER_ONLY */
     if (qdev_get_vmsd(DEVICE(cpu)) == NULL) {
         vmstate_register(NULL, cpu->cpu_index, &vmstate_cpu_common, cpu);
     }
--

2.21.3

#12 lore raw

PATCH v3 9/12 arch_init: Remove unused 'qapi-commands-misc.h' include

In reply to Philippe Mathieu-Daudé

Commit ffaee83bcb2 moved qmp_query_target but forgot to remove this include.

---
 arch_init.c | 1 -
 1 file changed, 1 deletion(-)
arch_init.c +0 -1
index d9eb0ec1dd..8afea4748b 100644
@@ -27,7 +27,6 @@
 #include "sysemu/arch_init.h"
 #include "hw/pci/pci.h"
 #include "hw/audio/soundhw.h"
-#include "qapi/qapi-commands-misc.h"
 #include "qapi/error.h"
 #include "qemu/config-file.h"
 #include "qemu/error-report.h"
Signature · 1 line
2.21.3
#13 lore raw

PATCH v3 10/12 target/i386: Restrict CpuClass::get_crash_info() to system-mode

In reply to Philippe Mathieu-Daudé
---
 target/i386/cpu.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)
target/i386/cpu.c +5 -1
index 9c256ab159..eec1ac7cea 100644
@@ -6848,6 +6848,7 @@ static void x86_cpu_register_feature_bit_props(X86CPU *cpu,
     x86_cpu_register_bit_prop(cpu, name, w, bitnr);
 }
 
+#if !defined(CONFIG_USER_ONLY)
 static GuestPanicInformation *x86_cpu_get_crash_info(CPUState *cs)
 {
     X86CPU *cpu = X86_CPU(cs);
@@ -6891,6 +6892,7 @@ static void x86_cpu_get_crash_info_qom(Object *obj, Visitor *v,
                                      errp);
     qapi_free_GuestPanicInformation(panic_info);
 }
+#endif /* !CONFIG_USER_ONLY */
 
 static void x86_cpu_initfn(Object *obj)
 {
@@ -6937,8 +6939,10 @@ static void x86_cpu_initfn(Object *obj)
                         x86_cpu_get_unavailable_features,
                         NULL, NULL, NULL, &error_abort);
 
+#if !defined(CONFIG_USER_ONLY)
     object_property_add(obj, "crash-information", "GuestPanicInformation",
                         x86_cpu_get_crash_info_qom, NULL, NULL, NULL, NULL);
+#endif
 
     for (w = 0; w < FEATURE_WORDS; w++) {
         int bitnr;
@@ -7251,7 +7255,6 @@ static void x86_cpu_common_class_init(ObjectClass *oc, void *data)
     cc->cpu_exec_interrupt = x86_cpu_exec_interrupt;
 #endif
     cc->dump_state = x86_cpu_dump_state;
-    cc->get_crash_info = x86_cpu_get_crash_info;
     cc->set_pc = x86_cpu_set_pc;
     cc->synchronize_from_tb = x86_cpu_synchronize_from_tb;
     cc->gdb_read_register = x86_cpu_gdb_read_register;
@@ -7262,6 +7265,7 @@ static void x86_cpu_common_class_init(ObjectClass *oc, void *data)
     cc->asidx_from_attrs = x86_asidx_from_attrs;
     cc->get_memory_mapping = x86_cpu_get_memory_mapping;
     cc->get_phys_page_attrs_debug = x86_cpu_get_phys_page_attrs_debug;
+    cc->get_crash_info = x86_cpu_get_crash_info;
     cc->write_elf64_note = x86_cpu_write_elf64_note;
     cc->write_elf64_qemunote = x86_cpu_write_elf64_qemunote;
     cc->write_elf32_note = x86_cpu_write_elf32_note;
Signature · 1 line
2.21.3
#14 lore raw

PATCH v3 11/12 target/s390x: Restrict CpuClass::get_crash_info() to system-mode

In reply to Philippe Mathieu-Daudé
---
 target/s390x/cpu.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
target/s390x/cpu.c +5 -7
index f2ccf0a06a..afb82206c7 100644
@@ -247,6 +247,7 @@ out:
     error_propagate(errp, err);
 }
 
+#if !defined(CONFIG_USER_ONLY)
 static GuestPanicInformation *s390_cpu_get_crash_info(CPUState *cs)
 {
     GuestPanicInformation *panic_info;
@@ -256,11 +257,7 @@ static GuestPanicInformation *s390_cpu_get_crash_info(CPUState *cs)
     panic_info = g_malloc0(sizeof(GuestPanicInformation));
 
     panic_info->type = GUEST_PANIC_INFORMATION_TYPE_S390;
-#if !defined(CONFIG_USER_ONLY)
     panic_info->u.s390.core = cpu->env.core_id;
-#else
-    panic_info->u.s390.core = 0; /* sane default for non system emulation */
-#endif
     panic_info->u.s390.psw_mask = cpu->env.psw.mask;
     panic_info->u.s390.psw_addr = cpu->env.psw.addr;
     panic_info->u.s390.reason = cpu->env.crash_reason;
@@ -286,6 +283,7 @@ static void s390_cpu_get_crash_info_qom(Object *obj, Visitor *v,
                                      errp);
     qapi_free_GuestPanicInformation(panic_info);
 }
+#endif
 
 static void s390_cpu_initfn(Object *obj)
 {
@@ -295,16 +293,16 @@ static void s390_cpu_initfn(Object *obj)
     cpu_set_cpustate_pointers(cpu);
     cs->halted = 1;
     cs->exception_index = EXCP_HLT;
+#if !defined(CONFIG_USER_ONLY)
     object_property_add(obj, "crash-information", "GuestPanicInformation",
                         s390_cpu_get_crash_info_qom, NULL, NULL, NULL, NULL);
-    s390_cpu_model_register_props(obj);
-#if !defined(CONFIG_USER_ONLY)
     cpu->env.tod_timer =
         timer_new_ns(QEMU_CLOCK_VIRTUAL, s390x_tod_timer, cpu);
     cpu->env.cpu_timer =
         timer_new_ns(QEMU_CLOCK_VIRTUAL, s390x_cpu_timer, cpu);
     s390_cpu_set_state(S390_CPU_STATE_STOPPED, cpu);
 #endif
+    s390_cpu_model_register_props(obj);
 }
 
 static void s390_cpu_finalize(Object *obj)
@@ -488,13 +486,13 @@ static void s390_cpu_class_init(ObjectClass *oc, void *data)
     cc->do_interrupt = s390_cpu_do_interrupt;
 #endif
     cc->dump_state = s390_cpu_dump_state;
-    cc->get_crash_info = s390_cpu_get_crash_info;
     cc->set_pc = s390_cpu_set_pc;
     cc->gdb_read_register = s390_cpu_gdb_read_register;
     cc->gdb_write_register = s390_cpu_gdb_write_register;
 #ifndef CONFIG_USER_ONLY
     cc->get_phys_page_debug = s390_cpu_get_phys_page_debug;
     cc->vmsd = &vmstate_s390_cpu;
+    cc->get_crash_info = s390_cpu_get_crash_info;
     cc->write_elf64_note = s390_cpu_write_elf64_note;
 #ifdef CONFIG_TCG
     cc->cpu_exec_interrupt = s390_cpu_exec_interrupt;
Signature · 1 line
2.21.3
Reviewed-by on v3 11/12
#15 lore raw

Re: [PATCH v3 11/12] target/s390x: Restrict CpuClass::get_crash_info() to system-mode

Quoted 6 lines · On Mon, 4 May 2020 17:29:21 +0200 Philippe Mathieu-Daudé <[email protected]>…
---
 target/s390x/cpu.c | 12 +++++-------
 1 file changed, 5 insertions(+), 7 deletions(-)
#16 lore raw

PATCH v3 12/12 hw/core: Restrict CpuClass::get_crash_info() to system-mode

In reply to Philippe Mathieu-Daudé
---
 include/hw/core/cpu.h | 7 ++++++-
 hw/core/cpu.c         | 2 ++
 2 files changed, 8 insertions(+), 1 deletion(-)
include/hw/core/cpu.h +6 -1
index 5bf94d28cf..0d1f9e084f 100644
@@ -490,6 +490,8 @@ bool cpu_paging_enabled(const CPUState *cpu);
 void cpu_get_memory_mapping(CPUState *cpu, MemoryMappingList *list,
                             Error **errp);
 
+#if !defined(CONFIG_USER_ONLY)
+
 /**
  * cpu_write_elf64_note:
  * @f: pointer to a function that writes memory to a file
@@ -539,6 +541,8 @@ int cpu_write_elf32_qemunote(WriteCoreDumpFunction f, CPUState *cpu,
  */
 GuestPanicInformation *cpu_get_crash_info(CPUState *cpu);
 
+#endif /* !CONFIG_USER_ONLY */
+
 /**
  * CPUDumpFlags:
  * @CPU_DUMP_CODE:
@@ -632,7 +636,8 @@ static inline int cpu_asidx_from_attrs(CPUState *cpu, MemTxAttrs attrs)
     }
     return ret;
 }
-#endif
+
+#endif /* CONFIG_USER_ONLY */
 
 /**
  * cpu_list_add:
hw/core/cpu.c +2 -0
index 786a1bec8a..85b9723fee 100644
@@ -209,6 +209,7 @@ static bool cpu_common_exec_interrupt(CPUState *cpu, int int_req)
     return false;
 }
 
+#if !defined(CONFIG_USER_ONLY)
 GuestPanicInformation *cpu_get_crash_info(CPUState *cpu)
 {
     CPUClass *cc = CPU_GET_CLASS(cpu);
@@ -219,6 +220,7 @@ GuestPanicInformation *cpu_get_crash_info(CPUState *cpu)
     }
     return res;
 }
+#endif
 
 void cpu_dump_state(CPUState *cpu, FILE *f, int flags)
 {
Signature · 1 line
2.21.3
#17 lore raw
In reply to Philippe Mathieu-Daudé
Patchew URL: https://patchew.org/QEMU/[email protected]/

Patchew URL: https://patchew.org/QEMU/[email protected]/

Hi,

This series failed the asan build test. Please find the testing commands and their output below. If you have Docker installed, you can probably reproduce it locally.

=== TEST SCRIPT BEGIN ===
#!/bin/bash
export ARCH=x86_64
make docker-image-fedora V=1 NETWORK=1
time make docker-test-debug@fedora TARGET_LIST=x86_64-softmmu J=14 NETWORK=1 === TEST SCRIPT END ===

The full log is available at
http://patchew.org/logs/[email protected]/testing.asan/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]

Reviewed-by Tested-by on the v3 series
#18 lore raw
In reply to Philippe Mathieu-Daudé

Le 04/05/2020 à 17:29, Philippe Mathieu-Daudé a écrit :

Quoted 56 lines

This is the first part of a series reducing user-mode dependencies. By stripping out unused code, the build and testing time is reduced (as is space used by objects).

Part 1 (generic):
- reduce user-mode object list
- remove some migration code from user-mode
- remove cpu_get_crash_info()

This series is fully reviewed.

Since v2:
- Rebased due to conflict when applying patch:
"util/Makefile: Reduce the user-mode object list" because commit 01ef6b9e4e modified util/Makefile.objs:
"linux-user: factor out reading of /proc/self/maps"

Since v1:
- Addressed Laurent/Richard review comments
- Removed 'exec: Drop redundant #ifdeffery'
- Removed 'target: Restrict write_elfXX_note() handlers to system-mode'

$ git backport-diff -u v1 -r v2
Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch
[down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively

001/12:[----] [--] 'Makefile: Only build virtiofsd if system-mode is enabled' 002/12:[----] [--] 'configure: Avoid building TCG when not needed' 003/12:[----] [--] 'tests/Makefile: Only display TCG-related tests when TCG is available' 004/12:[----] [--] 'tests/Makefile: Restrict some softmmu-only tests' 005/12:[----] [-C] 'util/Makefile: Reduce the user-mode object list' 006/12:[----] [--] 'stubs/Makefile: Reduce the user-mode object list' 007/12:[----] [--] 'target/riscv/cpu: Restrict CPU migration to system-mode' 008/12:[----] [--] 'exec: Assert CPU migration is not used on user-only build' 009/12:[----] [--] 'arch_init: Remove unused 'qapi-commands-misc.h' include' 010/12:[----] [--] 'target/i386: Restrict CpuClass::get_crash_info() to system-mode' 011/12:[----] [--] 'target/s390x: Restrict CpuClass::get_crash_info() to system-mode' 012/12:[----] [--] 'hw/core: Restrict CpuClass::get_crash_info() to system-mode'

Philippe Mathieu-Daudé (12):
Makefile: Only build virtiofsd if system-mode is enabled
configure: Avoid building TCG when not needed tests/Makefile: Only display TCG-related tests when TCG is available tests/Makefile: Restrict some softmmu-only tests util/Makefile: Reduce the user-mode object list stubs/Makefile: Reduce the user-mode object list target/riscv/cpu: Restrict CPU migration to system-mode
exec: Assert CPU migration is not used on user-only build
arch_init: Remove unused 'qapi-commands-misc.h' include target/i386: Restrict CpuClass::get_crash_info() to system-mode target/s390x: Restrict CpuClass::get_crash_info() to system-mode hw/core: Restrict CpuClass::get_crash_info() to system-mode

Quoted 14 lines
 configure              |  4 +++
 Makefile               |  2 +-
 include/hw/core/cpu.h  |  7 ++++-
 arch_init.c            |  1 -
 exec.c                 |  4 ++-
 hw/core/cpu.c          |  2 ++
 target/i386/cpu.c      |  6 ++++-
 target/riscv/cpu.c     |  6 +++--
 target/s390x/cpu.c     | 12 ++++-----
 stubs/Makefile.objs    | 52 +++++++++++++++++++++----------------
 tests/Makefile.include | 18 +++++++------
 util/Makefile.objs     | 59 +++++++++++++++++++++++++++---------------
 12 files changed, 108 insertions(+), 65 deletions(-)
#19 lore raw
Quoted 72 lines · Laurent Vivier

Le 04/05/2020 à 17:29, Philippe Mathieu-Daudé a écrit :

Quoted 56 lines

This is the first part of a series reducing user-mode dependencies. By stripping out unused code, the build and testing time is reduced (as is space used by objects).

Part 1 (generic):
- reduce user-mode object list
- remove some migration code from user-mode
- remove cpu_get_crash_info()

This series is fully reviewed.

Since v2:
- Rebased due to conflict when applying patch:
"util/Makefile: Reduce the user-mode object list" because commit 01ef6b9e4e modified util/Makefile.objs:
"linux-user: factor out reading of /proc/self/maps"

Since v1:
- Addressed Laurent/Richard review comments
- Removed 'exec: Drop redundant #ifdeffery'
- Removed 'target: Restrict write_elfXX_note() handlers to system-mode'

$ git backport-diff -u v1 -r v2
Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch
[down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively

001/12:[----] [--] 'Makefile: Only build virtiofsd if system-mode is enabled' 002/12:[----] [--] 'configure: Avoid building TCG when not needed' 003/12:[----] [--] 'tests/Makefile: Only display TCG-related tests when TCG is available' 004/12:[----] [--] 'tests/Makefile: Restrict some softmmu-only tests' 005/12:[----] [-C] 'util/Makefile: Reduce the user-mode object list' 006/12:[----] [--] 'stubs/Makefile: Reduce the user-mode object list' 007/12:[----] [--] 'target/riscv/cpu: Restrict CPU migration to system-mode' 008/12:[----] [--] 'exec: Assert CPU migration is not used on user-only build' 009/12:[----] [--] 'arch_init: Remove unused 'qapi-commands-misc.h' include' 010/12:[----] [--] 'target/i386: Restrict CpuClass::get_crash_info() to system-mode' 011/12:[----] [--] 'target/s390x: Restrict CpuClass::get_crash_info() to system-mode' 012/12:[----] [--] 'hw/core: Restrict CpuClass::get_crash_info() to system-mode'

Philippe Mathieu-Daudé (12):
Makefile: Only build virtiofsd if system-mode is enabled
configure: Avoid building TCG when not needed tests/Makefile: Only display TCG-related tests when TCG is available tests/Makefile: Restrict some softmmu-only tests util/Makefile: Reduce the user-mode object list stubs/Makefile: Reduce the user-mode object list target/riscv/cpu: Restrict CPU migration to system-mode
exec: Assert CPU migration is not used on user-only build
arch_init: Remove unused 'qapi-commands-misc.h' include target/i386: Restrict CpuClass::get_crash_info() to system-mode target/s390x: Restrict CpuClass::get_crash_info() to system-mode hw/core: Restrict CpuClass::get_crash_info() to system-mode

Quoted 14 lines
  configure              |  4 +++
  Makefile               |  2 +-
  include/hw/core/cpu.h  |  7 ++++-
  arch_init.c            |  1 -
  exec.c                 |  4 ++-
  hw/core/cpu.c          |  2 ++
  target/i386/cpu.c      |  6 ++++-
  target/riscv/cpu.c     |  6 +++--
  target/s390x/cpu.c     | 12 ++++-----
  stubs/Makefile.objs    | 52 +++++++++++++++++++++----------------
  tests/Makefile.include | 18 +++++++------
  util/Makefile.objs     | 59 +++++++++++++++++++++++++++---------------
  12 files changed, 108 insertions(+), 65 deletions(-)
Quoted 2 lines

Thanks!

Paolo, since it is a bit of everything, do you mind taking this series?
For your convenience, you can use this link with all the patches and the tags already applied at once! :p
https://patchew.org/QEMU/[email protected]/mbox

Regards,

Phil.